1 Technical notes on version 2.5
5 command separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
6 examples/database/dbcheck.sql
7 enhancement to wait command: wait mount ...
9 filepattern (restore with regex in bsr)
14 kes Rework next_vol and autoprune a bit due to failure in
15 recycle-test. prune_volumes() now returns no status,
16 but should prune at least one Volume, if possible.
17 kes Modify check_if_volume_valid_or_recyclable to reject a
18 volume with Recycle set off.
19 kes Modify prune_volumes() to continue if volume Recycle is off
20 or if the volume has expired. Add more debug.
22 kes Fix bug #1046 VolumeToCatalog incorrectly reports mounted
23 filesystems as missing on the Volume.
24 kes Rewrite the set_jcr_job_status() code to include job status
25 priorities so that more important status changes occur but
26 lower priority status changes will not overwrite something
27 more serious. This could possibly cause reporting incorrect status
28 reporting in some cases. More testing is needed to ensure
29 I have the right priorities. This vastly simplifies the previous
31 Verify Diff status should now be correctly reported, whereas it
33 kes Reduce some debug output.
34 kes Apply Joao's patch to SQLite tables to make chars work.
36 ebl Fix #1175 About update slots that don't reset InChanger flag when
38 ebl Fix #1173 where prune_volume() returns a volume from the scratch.
40 kes Remove jobq.c constraint that read and write SD must be
41 different. This may lead to more deadlocks in the SD,
42 but they should be resolved there.
43 kes Ensure that job report is always printed even if job is failed
45 kes Don't print job report twice for failed VBackup jobs.
47 kes Fix editing of retention time difference to use 64 bit
48 int instead of 64 bit unsigned. This should permit very
49 long retention periods.
50 kes Implement code to prohibit a write job from appending to a
51 Volume that will be used for a read operation. This is
52 new code and could possibly cause some conflicts.
54 kes Integrate James Harper's Exchange Win32 plugin patch.
55 kes Apply patch from Marco van Wieringen that implements the new
56 Solaris libsec interface for ACLs so that Bacula can save and
57 restore both the new ACLs and old ACLs.
58 kes Marco's patch also corrects the file dependency generation code
59 so that it works properly both with shared libraries and static
61 kes Marco's patch also includes a small cleanup of the cats Makefile
62 to remove some references to non-existent files.
64 kes Modify win32 Makefiles to use full paths in most cases.
65 In particular add MAINDIR environment variable that points
66 to the main Bacula source directory.
68 kes Add read volume list code to SD -- not yet used.
69 kes Add James' binutils patch
70 kes Split volume management code out of src/stored/reserve.c into
72 kes Modify configure to do an automatic make clean. This ensures
73 that any changes to ./configure options are handled correctly.
75 Beta version 2.5.16 release:
77 ebl Rename JobStat table to JobHistory
78 kes Ensure that only normally terminated jobs are migrated.
80 kes Add Makefile dependency when using LIBTOOL_LINK so that any
81 change in ./configure options will be accounted for.
83 kes Fix typo in the ACL patch that I overlooked.
84 kes Apply Marco's libtool include patch.
86 kes Apply Bastian Friedrich's ACL patch to eliminate ACL
87 errors during restore.
88 kes Minor cleanup of create_restore_volume_list() code.
89 kes Fix typo in console Makefile.in
91 ebl Fix #1110 about RunScript that can't execute a script with
92 Unicode caracters in the path.
94 kes Apply tray-monitor patch from Bastian Friedrich to make it
97 kes Apply cleanup patch from Marco
98 kes Apply patch from Marco van Wieringen <mvw@planets.elm.net>
99 that implements libtool to create shared objects out of
100 the Bacula libraries.
101 kes Fix tray-monitor so it will speak to new FD.
102 ebl Fix bug with ansi label when volume name length < 6
103 ebl Fix segfault in debug level > 50 with btape.
104 ebl Remove warning message in btape when command is empty.
105 kes Fix Win32 build to pull in new BACULA define.
107 kes Change IncludeDir to Exclude Dir Containing.
108 kes Implement code to prohibit ExcludeDirContaining in an
109 Exclude section (same for Plugin and Options). A bit
110 of a kludge with RES_ITEM2 ...
111 ebl Add field to command list to restrict Runscript console
113 ebl Use a separate JCR when running Console command with Runscript.
114 ebl Permit to mark version as Beta in some ouputs
116 kes Add plugin types in jcr.h to reduce need to cast.
117 kes Do better checking of plugin return values.
118 kes Free plugin context after calling pluginFree() as
120 kes Allow plugin to call JobMessage with NULL context.
121 kes Do not add plugin to global list if loadPlugin returns error.
122 kes Rework plugin.h a bit to reduce dependence on Bacula.
124 kes Move generation of bsr file for Virtual Backup to run section
125 so that it is generated just before actually running.
126 Suggested by Graham Keeling.
128 kes Add malloc and free Bacula entry points for plugins. Increment
129 FD plugin interface version. Create a bacula plugin context
130 structure to keep track of whether or not the plugin is disabled.
131 kes Apply FileIndex fix for plugin name stream suggested by James.
132 kes List plugins in FD status report when debug > 0.
134 ebl Add a new VerId variable that is printed in version command.
135 kes Fix migration SQL not to migrate a job that has not terminated.
136 This is a partial fix to bug #1164.
137 kes Sort JobIds returned from db_accurate_get_jobids() to fix Virtual
138 backup start time bug reported by Graham Keeling.
140 ebl Fix possible bug in cancel_job() with job that are not
143 kes Fix bat build for Win32.
145 kes Copy plugin link field into ffpkt.
147 kes Integrate patch from Kjetil Torgrim Homme <kjetilho@linpro.no>
148 It provides FileRegex in bsr files and code to collect regex
149 from the user during restore, an Allow Mixed Priorities feature,
150 and documentation for the above.
151 ebl Remove db berkeley from configure process
152 kes Do dirty check on hostname (Linux only) and if not resolvable
153 use localhost as default.
154 kes Increase vtape max block to 20GB.
156 kes Refactor restore code to create a close_previous_stream(). This
157 This may destabilize the source.
158 kes Implement planned startRestoreFile() plugin call.
159 ebl Remove missing Loaded information from status slots storage command.
160 ebl Fix Console command problem that cancels the job
161 kes Add more plugin restore debug code.
163 kes Fix plugin_bwrite - plugin-blseek mixup pointed out by James.
164 kes Rewrite plugin restore interface a bit to correspond to how Bacula
165 creates and writes to the restored file.
166 kes Add some DebugMessage() calls to the bpipe-fd.c program.
168 kes Apply Marco van Wieringen's set of patches, cleans up Migration/Copy
169 Implement 'Pool Uncopied Jobs', allow Solaris Compiler to build
170 Bat; allow add and delete in place of mark and unmark.
171 kes Another attempt to fix the endRestoreFile plugin bug noted below.
173 kes Apply dbi driver patch from Joao.
174 kes Correct a bug in passing the context to the endRestoreFile() plugin command.
175 Bastien Friedrich reported the bug.
176 kes Create plugin instance only when FD job starts.
177 kes Add new FD plugin event: bEventCancelCommand when
178 a cancel command is issued to the FD.
180 kes Add cmd_plugin flag to jcr so we can globally know if a
181 command plugin is running.
182 kes If command plugin running, do not attempt (for the moment)
183 to get Win32 extended attributes.
184 kes Ensure that proper Win32 flags are set in bfile packet
185 if plugin_bopen() works on Win32.
186 kes Remove generated src/plugins/fd/Makefile
188 kes Implement build and install of bpipe-fd.so plugin.
189 kes Rework the interface that passes packets to the plugin
190 so that the packet is started and ended by the packet size.
191 This allows the driver to do a sanity check.
193 kes Rework the pluginIO Bacula internal code to enable
194 proper handling of Win32 error codes from GetLastError.
195 kes Apply Joao's patch to regress startover_libdbi.
197 ebl Add -B option to dbcheck to get catalog information
198 kes Fix Win32 build to include new library function.
199 kes Remove some old reader/writer code.
200 kes Implement ./configure --with-plugindir=xxx
201 ebl Fix the mysql bug in the new accurate code
202 kes Improve plugin debug. Create plugin test.
203 kes Set main thread specific data to INVALID because it
204 has no jcr. This allows debug output to work correctly.
205 kes Add src/plugins/fd/Makefile to ./configure process.
206 kes Make first cut attempt to correct SQL that computes the current
207 Pool usage. This is to fix bug #1159.
208 kes Do a bunch of plugin cleanups for Win32 and more careful checking
209 of PluginDirectory and whether or not a plugin was found.
211 kes This code should fix the race condition that leads to a Director
212 crash at job end time when the job list is updated. This was reported
214 kes Add more plugin documentation and fix include of config.h for
215 Win32 build (I hope).
217 ebl Revert to htable instead of rblist
218 ebl Cleanup accurate code (remove tcdbm parts) and use red/black
219 tree instead of htable.
220 ebl Use a dedicate DB link to compute and send the accurate list
223 kes Fix compile errors in filed/fd_plugin.c.
225 kes Remove all double quotes from SQLite creating script and
226 replace by single quotes as suggested by John Huttley.
228 kes Apply dbcheck patch from Yuri Timofeev <tim4dev@gmail.com>.
229 It significantly improves the performance of dbcheck for
231 kes Fix bad debug code call in src/filed/accurate.c
233 kes Change two Jmsgs in accurate to Dmsg to reduce unnecessary
234 output. Perhaps we really need to implement M_SAVED.
236 kes Fix bug #1156 FD crash during processing of Accurate data.
237 kes Tweaks to htable code to improved debugging and make names
238 a bit more meaningful.
240 ebl Remove time_t from update_stats()
242 kes Modify the license of the example plugin program to allow
243 it to be used by anyone for making a Bacula plugin.
244 kes Make apply_rp_codes() in bpipe-fd.c be static.
246 kes Remove Encryption and Accurate lines in vbackup output -- not used.
247 kes Fix subtle bug in vbackup by not changing DEV_RECORD packet.
248 kes Add host name to items printed during dump.
249 kes Make Check File Changes default on.
251 kes Set the default FD timeout to 3 minutes (previously 30).
252 kes Apply Bastian Friedrich's weird spelling correction patch.
254 kes Always print Verify hash differences. Rename variable to make the
255 code slightly more readable.
257 kes Correct tests for MaxFullInterval as reported by
258 Ulrich Leodolter <ulrich.leodolter@obvsg.at>..
259 kes Fix MaxDiffInterval code as well.
260 kes Enable Win32 plugin load code in lib.
261 kes Make Verify code that computes disk checksums use the same
262 algorithm as backup when dealing with sparse files.
263 kes Attempt to run VSS on any systems newer than Vista -- should
264 make it work on Windows Server 2008.
265 ebl Change the new statistic implementation. Remove the UseStatistic
266 directive and add a 'update stats [days=...]' command. You can
267 now decide when copy job records from Job table to JobStat.
268 Statistics are much more accurate with this.
270 kes Fix SQL case problem that may cause the failure of DiskToCatalog
272 kes First cut adding SD plugins.
274 kes Add Slot if it is non-zero to writing bsr file after a
276 kes Change a number of bnet_fsend() into class method calls.
277 kes Begin audit of diff of 2.4 branch to trunk code.
279 ebl Fix the mysql creation script that double-created an
280 index of the same field on the Media table.
281 Add an index to on VolumeName to the Media table for mysql.
283 kes Another try at fixing Vbackup. It looks much better this time.
284 Disable file index sanity check in FD with value stored in
285 attributes record because with Vbackup the File Index gets
286 changed, but not the attributes record.
287 Enhance some debug code.
288 Fix handling of re-indexing records that are copied in Vbackup.
290 kes Made level_to_str() know about Virtual backup.
291 kes Set correct Virtual backup write pool.
292 kes Fix compile warning in new dbcheck port code.
293 kes Fix migration code broken by previous virtual backup fix.
295 kes Fix problem of Virtual backup not writing a sequential FileIndex.
296 kes Reset Virtual backup time/date to the value from the last backup.
297 kes Ensure that storage name is passed to SD on read.
298 kes Correct a problem with Level and Virtual backup, rework how
299 bsrs are printed in debug to use standard routine.
300 kes Apply patch from Chris in bug #1133 that provides alternate db port
302 ebl Remove catalog dependency from bcopy tool.
303 ebl Modify catalog scripts to have an easier packaging integration,
304 using default variables.
305 Make difference between SQLite3 and SQLite in db_get_type()
307 kes Apply most of changes in a patch from:
308 Michael Stapelberg <michael+bacula@stapelberg.de>
309 that allow the Bacula FD to compile on IRIX 6.5.
311 kes Apply patch from Bastian Friedrich that accepts a yes on a
312 delete volume command line.
313 kes Attempt to fix bug #1128 InChanger flag cleared during Migration
314 job when reading from one autochanger and writing to another.
315 kes Minor tweaks (copyright dates convert to use method instead of bnet).
317 kes Fix NULL Volume error when reading (or Migration or VBackup) must switch
318 drives when no tape is mounted.
320 kes Add additional info to some SD messages.
321 kes Add fix supplied by Martin Simmons for turning off EOL character
322 in new console multi-command code.
324 kes Fix a Verify InitCatalog problem where in certain cases
325 a garbage filename may be entered in the verification database. This
328 kes Add VSS 64 bit dll entry point in src/win32/filed/vss_generic.cpp
329 sent in by Riyas Yoosuf.
331 kes Fix seg fault in Dir during estimate command with no level value
332 given. This fixes bug #1140.
334 kes Add message to migration job when the target job is already migrated.
335 This closes bug #1129.
338 kes Raise some restore debug levels.
339 kes Replace off_t by boffset_t where ever I found it.
341 kes Define a machine dependent ioctl request type for use with
344 kes When a migration job actually runs, re-check the Job record
345 and skip if the job is already migrated. This should
346 significantly reduce the problems with bug #1129.
348 kes Set MALLOC_CHECK_=0 in environment before starting Bacula to
349 turn off glibc checks that prevent getting good dumps.
350 kes Implement console 'wait mount' command. Doesn't yet work.
351 kes Implement timeout=nn on console 'wait mount timeout=nn' command.
352 kes Break the do_swapping into do_unload, do_swapping, and
353 do_load. It is much more logical that way.
354 kes Implement a set_dcr_from_vol subroutine in acquire.c for
355 reading volumes. This allows the dcr to be refreshed after being
356 zapped when the wrong volume is mounted.
357 This should fix bug #1126 -- During multiple tape restore, bacula
358 does not ask for physical tape change, but rereads same tape
360 kes Apply patch submitted for bug #1107 with a small modification.
361 This fixes a bug where bcopy copied too many records.
362 kes Make some tweaks to bsmtp based on patch submitted in bug #1124.
363 This fixes bug #1124.
364 kes Make the default bat restore Pool be Any. This fixes bug #1118.
366 kes Remove debug statement that crashes the SD at the end of
367 a tape during restore. Fixes bug #1125.
369 kes Implement Win32 bat changes made to Branch-2.4
371 kes Tweak separator command in console to start disabled and
372 allow defining no separator character. Also make code a
373 bit more fault tolerant.
374 kes Make btraceback write the traceback to the working directory
375 before attempting to mail it.
376 kes Add a RFC to Projects.
378 kes Attempt to implement a kludge to make Qt work with bat
380 kes Setup rstorage correctly. Virtual backups are working.
382 kes Move setting JobLevel and JobType into a method, which should
383 allow completing Virtual Backups.
384 kes Fix verify jobs to work again.
386 kes Virtual Backup tweaks -- it is close to working.
388 kes Ensure that SD tried to mount a volume not in an autochanger
389 at least once before asking for operator intervention.
390 kes Make SD aware of Virtual Backup jobs.
391 kes Add VirtualFull for bat.
392 kes Changes to get read storage correct for Virtual Backup.
394 kes Remove old code from label.c
395 kes Split display_display_info() out of write_bsr_file()
396 kes do_vbackup_init() working -- i.e. bootstrap file built.
397 kes Change Bacula trademark owner from John Walker to Kern Sibbald
398 kes First non-working cut of vbackup
399 kes Correct FD heartbeat code to use volatile variable accessed by
401 kes Zero thread id with memset if on Win32 in case it is a struct.
402 kes If cannot create JobMedia record, continue to try to write eof
403 and clean up in block.c
405 kes Add code to interface OpenSSL to new Win32 pthreads code which
406 used a structure for thread_t.
408 ebl tweak bat for win32 compilation
410 ebl Remove tokyo cabinet from the source
411 ebl Update configure/autoconf to support berkeley DB
412 ebl Add a sort to db_get_file_list() to improve bsr construction time.
414 kes Add a mtx-changer.conf file that is not overwritten during
415 an upgrade. It fully configures the mtx-changer script.
416 kes Clear in-use bit on vol when unused while swapping.
418 kes Remove sleep at end of ./bacula
419 kes Clear hash packet for hardlinked files correctly. This corrects
420 a long standing bug where hardlinked files selected individually
421 would occasionally not be restored.
423 kes Apply Eric's patch to ensure that autoprune does not return
424 a Volume not in the autochanger unless requested to do so.
425 kes Correct bat restore display of multiple drives. This fixes
427 kes Do find_a_volume() each time an unload is done. This
428 fixes the failure of maxvol2-test.
430 kes Add some SD debug code.
431 kes Do find_a_volume() each time an unload is done.
432 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
433 and adds --with-db-port to ./configure.
434 kes Use Qmsg() in job.c watchdog callback.
436 kes Release main control rwlock if ABORTing.
437 kes Make watchdog connect timeout queue messages rather than sending
438 directly to avoid lock conflicts with the real thread.
439 kes Add const char in dbd.c to avoid compiler warnings.
440 kes Fix python compiler string warning. Note, IMO the GNU C++
441 compiler guys have made a *very* bad change to their compiler.
442 They now force all strings to be 'const' unless you explicitly
443 cast them, which is extremely ugly and ruins nice code as well
444 as creates a lot of useless work.
446 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
447 mt. This fixes bug #1116.
448 kes Add const in python files to reduce compiler warnings.
449 This may have to be backed out because of later compiler
451 kes Fix failure of 2drive-concurrent-test. Always read label;
452 clear_unload() only after drive is defined in acquire_for_read().
454 kes Generally clean up the manual tape loading code. The main
455 conceptual change is that when a volume is marked to be unloaded,
456 its volume name is retained, and it is only marked as unloaded
457 when either the autoloader says it is unloaded or another tape
458 is read on that drive.
460 kes Add debug code and refactor subroutine in stored/mount.c
461 kes Fix format problem in bscan output reported in bug #1105.
462 ebl Fix get_next_volume_for_append logic with autochanger
463 - use pruned volumes if found
464 - don't reset the inchanger flag after getting a recycled volume
466 Fix recycle_oldest_purged_volume to take InChanger flag in account
468 ebl Add mmap/unmmap implementation for tokyodbm under win32
470 kes Make first step toward eliminating globals from config
471 scanning. Also should be a workaround for FORTIFY_SOURCE
472 GNU C bug -- fixes bug #1042.
474 kes Apply duplicate job tests to restarted jobs.
475 kes Copy more data when restarting a job so that run
476 overrides are kept. This should fix bug #1094.
478 kes More word alignment cleanup.
479 kes Fix bug where SD did not ask operator if the device could not
480 be opened. Reported by Eric.
482 kes Add dbuser to DIR conf file (replaces user).
483 kes Add --with-db-password to ./configure
484 kes Fix regress to handle db_password.
485 ebl Add new 'status storage slots' that list autochanger
487 ebl Update vtape driver to compile only under Linux.
488 ebl Fix a bug when restoring with a wrong mediatype.
490 kes Eliminate ints from conf files and structures to avoid
491 word alignment problems
493 kes Fix bug reported by Scott Barninger where the bacula script
494 refers to scripts in the wrong directory. Needed to meet the
495 requirements of recent FHS location changes.
496 ebl Disable vtape for FreeBSD.
498 ebl Modify disk-changer to check if slot contains something before
501 ebl Fix vtape on win32 and debian.
502 ebl Fix autoselect patch (cause segfault).
504 ebl Fix autoselect option broken for a while. Fix #1089. Need some
505 work with StorageId to be able to use a particular drive in a
508 ebl Rename vtape to vtape.
509 ebl Update vtape driver.
511 ebl Modify vtape driver to avoid sparse file.
512 kes Add make clean of qt-source directory during ./configure
513 kes Store last block number written to tape in DEVICE and
514 use it for testing for correct last block on EOT.
516 Release Version 2.4.0:
520 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
521 This fixes bug #1095.
523 kes Add create_postgresql_database.sql to Win32 installer. Should
524 fix problem reported by Juilio Monteiro.
525 kes Get correct slot when auto unloading a device. This fixes bug
528 kes Fix multiple media restore.
529 kes Make DEVICE Slot private and access it via a method.
530 Allows better control over when it is set and cleared.
531 kes Fix possible seg fault if SQL error.
533 kes Add Martin's fixes to argument scanning for the estimate
534 command. This fixes bug #1093.
535 kes Add debug code to SD.
536 kes Fix renaming a Volume, which used the wrong Volume name.
538 kes If operator has rewind tape, print warning, release tape and
539 try once more. If tape is positioned somewhere, something went
540 wrong, so mark the tape in error and try once more. Previously
541 this error was fatal, now it produces an error message.
542 kes Ensure correct volume name displayed during restore
543 kes Ensure that Volume is mounted for restore.
545 kes Fix a few more Coverity reported problems.
547 kes Apply Allan Black's status dir job count patch.
548 ebl Add information about IMPORT/EXPORT slots in mtx-script.
549 kes Enhance a couple of SD debug messages.
550 kes Tweak unload flag setting and ensure it is set during swap.
552 ebl Fix #1091 about bad output in estimate command.
554 kes Modify autochanger locking to attempt to avoid race
556 kes Make sure device not busy before doing label command.
557 kes Display open() errors except when polling. Previously too
558 many were suppressed. This should fix bug #1070.
559 kes Fix Win32 reparse points. Bacula will not recurse into any
560 reparse point directory, including mount points, unless the
561 directory is explicitly mentioned at the top level (same as
562 with Unix). A file that is linked to another file will be
563 backed up -- much as Unix does for hardlinked files.
564 This fixes bug #1041.
566 kes Remove double quotes from ChangeLog and ReleaseNotes
567 kes Remove StorageId test when pruning and recycling (Eric's changes).
568 kes Remove old form of locking when getting volumes -- causes deadlock.
569 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
570 the name unique and to eliminate compile time error.
571 kes Add accurate.o to Win32 FD Makefile
573 kes Fix cats dll build on Win32 after db_update_job_end_record
574 calling sequence change.
575 ebl Switch to tokyo dbm instead of htable in accurate code
576 ebl Include tokyo dbm to bacula source tree
578 kes Fix buffer overruns detected by Coverity.
580 kes Tweak joblog display.
582 kes Implement --without-qwt
583 kes Fix layout of restore tree dialog
584 kes Add configure bat QWT libraries, so that bat can be built
585 with or without the QWT libaries.
587 ebl Add dummy tape driver for regression tests.
588 kes Make sure we unload the right slot when swapping.
590 kes Add debug times, reduce size of two-pool-changer test
592 ebl Tweak autoconf scripts for vtape
594 kes Improve SD reserve debug code.
595 kes Testing an improvement to free up volumes no longer in use.
597 kes Rework SD acquire for read to handle autochanger Volume
599 kes Implement regression that explicitly tests swapping a Volume
600 from one drive to another.
601 kes Enhance disk-changer to detect most error conditions.
602 kes Fix SD code so that it properly swaps a Volume between drives.
603 This fixes bug #1083.
605 kes Apply libdbi patch from Joao Freitas for regress and for
606 Bacula trunk. Regress now works with libdbi. Nice.
607 kes Apply .nobackup patch from bug #1077 submitted by
609 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
610 name into jobs cloned via the run directive.
612 kes Prevent a Volume that is being swapped from being freed from
613 the volume list. This will most likely fix, at least partially,
615 kes Fix strippath so that it does not get a buffer overrun and crash FD.
616 This fixes bug #1078.
617 kes Remove 50 millisec wait in SD that broke debugger.
618 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
619 that a job may run, counted from when the job was scheduled.
620 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
621 a job may block waiting for a resource, counted from when the job starts
622 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
623 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
624 that implements multiple commands per line in the console when using
625 readline. Modify the default to use a semicolon as the command separator.
627 ebl Fix SQL query in migration code.
628 ebl Make accurate mode with hash disk pass regression tests
630 ebl Implement first cut of accurate backup with hash disk.
632 kes Force unload of volume when wrong volume mounted in SD.
634 kes Fix bat seg fault at termination.
635 kes Add Bacula generated version to bat about box.
638 kes Experiment with allowing multiple read jobs.
639 kes Move final volume swapping code to DCR method and
640 call it from acquire_for_read().
641 kes When wrong volume is mounted during read, unload_autochanger.
643 kes Integrate the libdbi changes from Joao Henrique Freitas
645 kes Stop searching for Volumes in SD askdir if DIR returns the
646 same volume name twice in a row.
647 kes Close bat console windows first to eliminate error message
650 kes Tweak the swap Volume from one drive to another code so that
651 it now seems to work.
652 kes Resolve several problems with recycling that broke the new
653 code (these problems are in 2.2.9 as well).
654 kes Remove the volume lock when calling the sysop code.
655 kes Don't mark a reserved volume with no writers as unused otherwise
658 kes Rework class structures for VOLRES, DCR, and DEVICE to make
659 the method names a bit more logical, and for more logically
660 handling the responsibilities.
662 kes Remove redundant code in terminating the scheduler that just
663 causes a seg fault in many cases.
664 kes Cleanup releasing a volume and make it a DCR method.
665 kes Improve algorithm for detecting pre-reserved volume and
668 kes Tweak volume swapping code so it works.
669 kes Correct name overloading in mount.c
670 kes Replace released flag in VOLRES with reserved and add access
671 methods for the VOLRES class.
672 kes Prevent volume from being released while being swapped.
673 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
674 plugin that add %w (where) and %r (replace flag) editing to
676 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
678 kes Refactor parts of stored/mount.c
680 ebl Add sanity checks for VolWriteTime and VolReadTime
681 ebl Take care of bad clock changes while computing VolWriteTime
682 and VolReadTime. This should fix or limit #1066
683 kes Correct error string numbers in dird/catreq.c
684 kes Restructure reserving, acquiring, and mounting volumes. Calls to
685 autochanger are deferred for mount.c -- simplifes the code.
687 kes Do not prune any running job. It just fails the job.
688 kes Lock the volumes when changing dev->reserved_device and marking
689 the volume unused otherwise the device can get reserved by
690 another job before the volume is released, thus blocking it.
692 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
693 kes Fix bug #1063, reuse of freed ptr in list nextvol.
694 kes Release regex compile buffer in filed/job.c
695 kes Add proper type of const char in sql_create.c
696 kes Turn off debug in daemon termination routines
697 kes Move free_volume_list() before devices are freed in stored.c
698 kes Fix reference to uninitalized stack variables in bregex.c.
699 This should correct bug #1067.
701 kes Fix possible seg fault in SD when freeing a volume entry.
703 kes Implement unload_dev() before swap device.
704 ebl Add statistics prunning with option and menu
705 kes Separate unload_dev() from unload_other_device() in autochanger.c
707 kes Apply patch from bug #1069 that corrects spurious error messages
708 when ACLs enabled on SGI but no ACL exists.
709 ebl Fix small segfault in bacula-sd when debug level is 500
710 kes Modify run_program() and run_program_full_output() to use
711 call by reference for the results string. This corrects a long
712 standing problem where the address of the string may be changed
713 in the subroutine but not in the calling program.
715 kes Re-enable code to remember last volume mounted on a non-tape
717 kes Add patch supplied in bug #1068 that fixes a SD crash when using
718 a Virtual autochanger.
719 kes Generate correct JobMedia records during spooling/despooling when
720 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
721 <tih@hamartun.priv.no> for excellent analysis and testing.
723 kes Tweak hash algorithm for htable using Martin Simmons idea
724 for doing a circular shift.
725 kes Remember what volume is in VTLs (previously turned off for
727 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
728 pointed out some problems in creating JobMedia records during
729 spooling with concurrent jobs. Fix the problem by updating the
730 start file position before despooling and generate a jobmedia
731 record at the end of despooling.
733 kes Fix handling of JobMedia records during spooling and when a
734 Volume is changed without actually writing data to the Volume.
736 kes Rework certain SD locking based on gdb tracebacks of deadlocks
737 sent by Eric. This code now uses only the volume_lock() rather
738 than the reservations lock when at EOM and acquiring a new
740 kes Ensure only one exit point in several subroutines.
742 kes Implement bsock code to permit locking. Use the new code in Verify
743 in the FD to prevent the heartbeat thread from disrupting the Verify
744 data sent to the Dir.
745 kes Modify SD locking to eliminate locking the reservations system from
746 outside the system. Use the volume lock when getting media data
747 and reserving a new volume at end of media.
748 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
749 when SD starts are not locked into place.
751 kes Fix error compiling runscript code on 64 bit machines.
752 kes Tweak Win32 mount point code.
753 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
754 cleared giving bad file estimate).
755 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
758 kes Keep Schedule run lists in order as suggested by
761 kes Implement autostart scripts for Debian.
762 ebl Implement upgrade catalog scripts.
764 ebl Apply jobstat patch for long term statistics. Have to implement
765 purge stats command and upgrade scripts.
766 kes Fix mtx-changer.in for broken Debian mt program.
768 kes Fix large number of JobMedia records reported by Eric Bollengier.
770 kes Apply doc fix from bug #1062.
771 kes Resolve crash and improper restore wx-console Win32 restore
772 GUI. Fixes bug #1065.
773 kes Update Win32 wxWidgets to latest version.
774 kes Attempt to do correct handling of Win32 mount points. Should
776 kes Fix Win32 FD backup/restore memory leak due to improper termination
777 of BackupRead/Write. This fixes bug# 1038.
779 ebl Reduce memory usage for accurate backup, working only with ctime
780 and mtime. (not all Lstat field)
781 About 40MB for my Linux system (400.000 files)
783 kes Add dcr->reserved_volume flag that allows us to release a volume
784 even if it is not vol->released. This allows maxvol2 to work when
785 Volumes expire and we are already writing to the device (i.e. a
786 volume is pulled out from under us by another job terminating after
787 we reserve the drive).
789 ebl Permit multiple command/console per runscript definition.
790 RunScript { command = /bin/true ; command = /bin/false ... }
791 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
792 (restart an application) just after the VSS snapshot on windows.
793 kes Don't zap dcr values during release_volume() as they might
794 have the next Volume to be mounted.
795 kes Fix AIX prototype.
797 kes Second cut of drive switching during backup.
800 kes Update Win32 version of wxWidgets to most recent version.
801 kes Tweak Copy job details.
802 kes Rework dir_find_next_appendable_volume to make a bit more effort
803 to find a suitable volume before giving up.
805 kes Make ask_sysop_to_create... to return if waken from wait.
806 This helps get out of blocked conditions.
807 kes Experimental implementation of switch_device in reservations.
808 kes Implement FD version to allow easier protocol changes.
809 kes Add Plugin Options string -- not yet passed to FD.
810 kes Implement PluginOptions ACL.
812 kes Attempt to correct problems with restores with autochangers and
813 use counts going negative
814 kes Rework SD status command and implement API for bat. Implements
815 header, runing waitreservation, devices, volumes, spooling,
816 and terminated status keywords.
817 .status storage=xxx <keyword>
818 kes Clarify TLS error message by adding double quotes around name.
819 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
820 kes Pass jcr to tls routines so debug messages can be handled better.
821 kes Rework jobq resource allocation code, and possibly fix a bug
822 that caused reference counts to get out of sync.
824 kes Rename fd/dir plugin to use Bacula standard underscore.
825 kes Plugin work -- bring dir up to fd level.
826 kes Start implementation of VTL code
827 kes Fix Win32 build after adding new cats subroutine.
829 kes First cut at Duplicate Job implementation.
831 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
832 kes Start PluginOptions string, and refactor a bit of ua_run.c
833 ebl Apply Allan patch that permit to reset recyclepool.
835 kes Test patch -- possible fix or improvement for bug #1053
836 kes Refactor FD and SD status commands to permit new API code in
837 SD, and to fix Win32 build.
838 kes Win32 build is now working.
840 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
841 some ideas in patch from Scott Bailey.
842 kes Begin implementation of duplicate Job control.
843 kes Fix some of Win32 build after recent additions.
844 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
845 which causes the FD to detect whether or not the OS has the
846 honor no dump bit (*BSD systems), and if so, to skip backing up
847 any file with this bit set. The feature is enabled by setting
848 'honor no dump flag = yes' in the Options section of a FileSet.
850 kes Correct po warning message with datarootdir
851 kes Implement more code in dird.c to put configuration parsing in
852 a class rather than use globals.
853 kes Restructure SD status command for implementation of bat API
856 kes Suppress incorrect 'Will not descend from x into y' messages.
857 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
858 daemon globals used by parser.
859 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
861 kes Fix free of plugin_list when none exists.
863 ebl Apply accurate project patch.
865 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
866 on non-mempool object)
867 kes First cut of converting FD .status to work with bat API.
869 .status client=XXX header
870 .status client=XXX running
871 .status client=XXX terminated
872 kes Implement first cut of Copy Job.
873 kes Implement Catalog in Pool resource. It overrides catalog specified
874 in the Client resource.
876 kes Apply patch (with some difficulties) from Joao Henrique Freitas
877 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
879 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
880 ftruncate() actually works. In the case of some (cheap) NAS devices,
881 it does not, and so recycling NAS Volumes does not work. The code
882 simply unlink()s the file, then recreates it. This fixes bug #1011.
884 kes First incomplete cut of big malloc blocks for htable.
885 kes Tweak plugin code.
887 kes Plugin debug code + tweak a couple bat dialog layouts
889 kes Fix creating first JobMedia record during Migration to include
890 proper index. This caused slow restores of migrated jobs.
891 kes Temp fix to plugin name file_index.
892 kes Bacula backed up and restored a MySQL database.
894 kes Implement plugin restore.
895 kes Implement parsing of db_driver to give db_type index.
897 kes First cut of plugin restore code.
898 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
899 and do not strip paths on symbolic links.
900 kes Set catalog backup database and user name from values specified on
901 the ./configure line.
902 ebl Fix #1031 about wrong pool source information in job report.
905 kes Remove a redundant jcr argument to find_files, match_files, and
907 kes Implement '.status dir header|scheduled|running|terminated' that
908 prints the requested status section. With the exception of the
909 header, the other reports have fields separated by tabs (\t).
911 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
912 a resource embedded run command to find a since time if no explicit
913 since time was supplied on the command line.
914 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
915 that updates the state file at job termination time in addition to
916 when the daemon terminates.
918 kes First version where a plugin did a backup.
919 bpipe-fd.so created a backup file, wrote a test
920 string to it, and Bacua could restore this fabricated file.
922 kes Implement DB Driver = string for the DBI driver.
923 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
924 kes First cut of code for loading Win32 plugin dlls. Implement
925 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
926 and implement a dlfcn.h file based on opengroup's definitions of
929 kes First cut plugin directives.
931 kes Apply patch from bug #1049 to prevent stripping the path on a
933 kes Attempt to fix bug #1047 where stripping a path corrupts the
934 heap. Waiting for feedback.
935 kes Correct the Mount message not to suggest labeling a new tape
936 when doing a restore. Submitted by email by John Stoffel.
937 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
938 FD by using casting. Reported in bug #1042.
940 kes A bit of crypto cleanup. More later.
942 Release Version 2.2.8
944 kes Apply patch from Martin to correct bug #1040, bscan sets existing
946 kes Fixed important spelling error in doc -- bug #1045.
948 ebl Fix bextract to be able to extract non-portable Win32 data to
950 kes Move initialization of read/write res lock earlier in the code.
951 This fixes the crash with a null conf file. This fixes bug
953 kes Redefine CURES in lib/parse_conf to be URES and move it all
954 into lib/parse_conf.c -- this responds to bug #1042, but does
955 not fix it. The fix is not to compile with FORTIFY_SOURCE.
956 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
957 the trunk SVN. I don't think this was reported as a bug.
959 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
961 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
963 kes Add DataDespooling and DataCommitting status (committing is
964 the last despooling).
965 kes Finish implementation of new reservations code noted below.
967 kes Fix bsnprintf for float point numbers. I broke recently when
968 parameterizing some variables. This fixes bug #1036.
969 kes Undo recent reservations changes ... will apply them later
970 when they work better.
972 ebl Fixes #1034 which cause mysql to hang the connection after 8h
973 ebl Change default statistics target of filename.name and path.path
974 fields for PostgreSQL. This speeds lookup by indexes. Thanks
976 kes A few more tweaks to new reservation code. Make sure to clear
977 vol released flag when retaking volume. When reading label and
978 label is bad mark volume unused. When recycling, mark volume
979 unused so it can be renamed.
981 kes Fix reserve_volume() so it doesn't release a volume in use
982 (i.e. a volume entry not marked released). This should be
983 the last part needed to fix bug #1018.
985 kes Move Heartbeat documentation from Job to Director resource.
986 This fixes bug #1033.
988 kes Fix existing switch drive SD code to call autochanger to release
989 any old volume. This must be done to keep the autochanger from
990 releasing subsequently newly reserved volumes in doing a close().
991 This should fix bug #1018.
992 kes Fail if attempting to get console input in batch mode. This
993 should help fail RunScript console commands that are incomplete.
994 kes First cut implementing switch_drive() in SD (not actually called).
996 kes Implement first cut running console commands in a RunScript.
998 ebl Fixes bug #1028 where 'Selection Type' option was not usable
1000 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
1003 Release Version 2.2.7
1005 kes Add new free_tls() entry point so that Win32 builds.
1006 kes Fix compile warning in src/lib/util.c
1007 kes Fix entry point for edit_job_codes() so that Win32 builds.
1008 kes Fix seg fault Frank Sweetser reports in regression testing
1009 on his systems. The problem was that the original author of
1010 bsnprintf.c did not take into account the side effects of
1011 using ++x in the argument to a #define.
1012 kes Make SD protocol backward compatible with version 2.2.x.
1014 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
1015 because Bacula no longer restores sockets.
1016 ebl Always use ignorecase fileset option on win32 FD.
1018 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
1019 that implements double quoting include names in conf files,
1020 and also allows piping input by having the first character
1021 be a vertical bar (|).
1022 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
1023 that implement %f in RunScripts to pass the FileSet name.
1024 kes Skip leading | when lex input comes from a pipe as suggested
1025 by Michael Stapelberg <michael@stapelberg.de>.
1027 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
1028 Nerijus Baliunas <nerijus@users.sourceforge.net>
1030 kes Implement Plugin Directory and plugin events.
1032 kes Implement a security enhancement: TLS authentication but no
1033 encryption. Enabled by setting 'TLS Authentication = yes'.
1034 Note when this is on, TLS encryption is turned OFF!
1036 kes This patch corrects a problem where the maximum concurrent storage
1037 jobs counter gets out of sync during restore jobs causing jobs to
1038 'wait on max Storage jobs'. This patch fixes bug #1009.
1040 kes This patch fixes bcopy so that it produces correct Volumes.
1042 kes This patch eliminates spurious output to the console during a VerifyVolume
1043 job that contains encrypted data. It fixes bug #1024.
1045 kes This patch prevents the 'status dir' command from trying to use a scratch
1046 volume and possibly moving it from one pool to another. This patch fixes
1049 kes Add new include to postgresql.c suggested by Marc Cousins so
1050 that it compiles correctly with pgre version 8.3.
1052 kes Fix --archivedir addition to configure. Replace it with
1053 --with-archivedir in configure.in This fixes the regression
1055 kes This patch fixes bug #1012 where the job is canceled because
1056 of Max Run Time exceeded when the job has not yet started.
1058 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
1059 one 'part' to write. Instead of each part being stored on disk,
1060 written to DVD, then deleted from disk, all parts are written to disk,
1061 and only the last is written and deleted from disk.
1062 kes This patch fixes the status command to include the formating string for
1063 JS_AttrInsterting. It fixes bug #1021.
1064 kes This patch should fix the Mac OS X build problem on the latest
1065 Darwin, where sys/types.h was not included correctly (apparently
1066 due to a change in the Mac headers). The solution was to explicitly
1067 ensure that it is defined for the ./configure.
1068 This patch also has a rebuild of configure that includes the Debian
1069 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
1070 kes This patch should ensure that queued messages to the console are
1071 displayed as soon as possible. It should fix bug 1007, but has been
1072 reported not to work.
1074 kes This patch fixes the infinite loop when trying to increase the
1075 maximum number of volumes in a Pool during the add command.
1076 This patch fixes bug #1008.
1078 Release Version 2.2.6
1080 db Remove extra data on estimate command in joblist for bat.
1082 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
1083 really change anything, but is the beginning of doing it *right*.
1084 To do it completely right the LastWritten date must be passed to
1085 the SD, but it is not yet done.
1086 kes Minor tweaks to some bat restore SQL.
1087 kes This patch fixes bug #1003 where putting the message output from
1088 a Verify job into the catalog results in a recursive loop. The problem
1089 seems to show up only with postgresql (to be verified).
1090 kes Correct %x to %p in postgresql debug statement.
1092 kes Fix bug #942 where lots of emails where generated when the heartbeat
1093 interval was low and Bacula wanted a different tape from the one in
1096 ebl Add new SD despooling attributes and Dir inserting attributes
1097 job status codes in the catalog (Status table).
1099 ebl Use qmake-qt4 instead of qmake when available (debian system).
1101 kes Add a security warning to src/cats/make_catalog_backup.in indicating
1102 that passing the password via the command line (arg 3) is insecure.
1103 This responds to bug #990 (it doesn't fix it).
1105 kes Set default debug_level to zero. This corrects bugs #991 and #993.
1106 kes Fix a crash in bat when it cannot connect to the Director for example
1107 if the Director is not running.
1108 kes Remove redundant INDEX (JobId) from File table in the trunk.
1109 This fixes bug #992.
1110 kes Make explicit exception to GPL in LICENSE to permit linking
1111 the Win32 FD with Microsoft VSS code.
1112 kes Apply the Solaris package patch from
1113 Masopust, Christian <christian.masopust@siemens.com>
1114 kes Apply the patch to optionally add a timestamp in the debug output
1115 submitted by Mariusz Czulada <manieq@wp.eu>.
1117 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
1118 backend (sql_strerror). Fixes bug #989
1120 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
1121 It applied with no problems.
1122 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
1123 awk are on the path.
1124 kes Redirect stderror to stdin on mt status command in mtx-changer.in
1125 since the status is returned on stderr on Solaris.
1126 kes Activate Close button on tray-monitor window. This fixes
1128 kes Check for NULL item in parse_conf.c before calling it. In the
1129 case of Device, there is no item and this caused a seg fault when
1130 Device appears in the conf file.
1131 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
1132 avoids pulling in config.h multiple times in some new code.
1134 kes Fix spurious warning message printed when creating a volume with
1135 a LabelFormat. This fixes bug #976.
1137 Release Version 2.2.5
1139 kes Add JobId in place of Job name in all the Jmsg() output.
1140 kes Correct the APP_DESC for the Win32 storage service (remove an e).
1142 kes Make maxvol-test and new more strict maxvol2-test work.
1143 kes Print JobId in all Jmsg() job output.
1145 kes Add new SD despooling attributes and Dir inserting attributes
1146 job status codes. This fixes bug 961.
1147 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
1149 kes Fix doc issue. This fixes bug #963.
1150 kes Fix listing performance problems in bat. Pointed out by
1152 kes Remove old debug code.
1153 kes Fix bat code that tests for Win32. This should fix bug #968
1154 kes Query 5 list wrong Vol after migration. This fixes bug #960
1156 ebl Fix #969 where user can't change Replace option in restore menu.
1158 kes Save jcr in thread specific data (tsd) for each thread.
1159 kes Make Dmsg() print JobId as -%u.
1160 kes Make Jmsg, Emsg, and others automatically pickup the jobid
1161 for the thread if it exists.
1162 kes Remove old reservation debug jid code.
1163 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
1164 ebl Add an option that permit to specify spool size in job
1165 definition. (Applying patches/testing/spoolsize_per_job.patch).
1166 You must upgrade SD and DIR at the same time.
1167 dvl Add new configuration item --archivedir
1168 dvl Adjust regression tests to use tmp not /tmp. This will allow
1169 multiple concurrent runs of the regression tests.
1171 kes Fix race condition that drops final block written to volume.
1172 This happens in rare cases with multiple simultaneous jobs
1173 when the Volume fills. This fixes bug #964. May be related
1174 to bug #935 and possibly #903.
1175 kes Eliminate more strerror() and replace with bstrerror().
1176 kes Remove BSD getopt and replace with unrestricted IBM version.
1177 kes Fix Win32 build for changed calling sequences.
1178 kes More tweaks to the mount volume routines to get everything
1179 right. Changed variable name from find to have_vol, which is
1180 much easier to understand.
1181 kes Enhance btimer debug code.
1183 kes Fix FD->SD authorization failure, which was due to spurious
1184 wakeups from a pthread_cond_timedwait(). Simply check the
1185 predicate before continuing. This fixes bug #953.
1186 kes Add const char where needed (more to do). Remove temp debug code.
1188 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
1189 kes Don't overwrite error message in check_tables_version.
1191 kes Unlock batch insert tables with same calls used elsewhere.
1192 kes Allow starting 59 jobs a second.
1193 kes Make SD session key more random.
1194 kes Add retry for SQLite opening db if it fails. Probably helps
1196 kes Suppress extra error messages during batch insert failure.
1198 kes Add jcr to timer packets so if killed message can be sent to job.
1199 kes Add JobId to all Dmsg() output.
1200 kes Put some FD auth code on dbglvl rather than fixed.
1201 kes Return insert attributes error message in db msg buffer to avoid
1202 false error messages. Helps fix bug #966.
1203 kes Separate batch init error messages. Probably helps fix bug #966.
1204 kes Make SD code that contructs attribute insert check string lengths
1206 kes If Dir gets an error during inserting attributes, cancel SD.
1207 This reduces unnecessary error messages.
1209 kes Correct search boolean for getting Volume info
1210 ebl Cleanup batch insert code. Probably fixes bug #965.
1211 kes Back out one small change to the reservation system (reserving a volume).
1212 kes Rework how a Volume is mounted. It is now much more intelligent and
1213 will always attempt to use any mounted volume if possible and reduces
1214 calls to the Director asking about volumes.
1216 kes Turn off some code when batch insert not enabled.
1217 kes Edit FD name in connect error messages.
1218 kes Rework the reservation system to take into account that the Director
1219 might give us a Volume that is different from the current one being
1220 used, and to ensure that we don't exceed Maximum Volume Jobs.
1221 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
1222 fatal error with multiple jobs running'
1223 kes Add more debug code in reservation system.
1224 kes Implement maxvol-test to check bug #947.
1226 kes Add code to handle tray monitor separated from Win32 FD.
1227 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
1229 kes Add missed return in fixing verify bug -- trunk only.
1230 ebl Fix a command parser issue causing a director segfault.
1231 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
1232 This fixes bug #954.
1233 kes Increase the max block size to 4MB fixes bug #957.
1234 kes ERABT if user sets min block size > max block size. Fixes bug #956.
1235 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
1236 is not properly mounted (recognized) during a poll.
1237 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
1238 Job that has differences reports Verify OK.
1239 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
1241 ebl Add an option to operate on all pools with update vol parameters.
1242 This complete the project 20. Patch from Nigel Stepp.
1243 ebl Add history support to bconsole when using readline.
1244 Using Ctrl-D to exit doesn't update .bconsole_history
1245 kes Modify new volume algorithm to use max MediaId for generating next
1246 volume number rather than the count of Volumes. This should essentially
1247 eliminate the failure rate if some volumes were deleted. Bug #921.
1248 kes Begin implemention of Optimize Job Scheduling.
1249 kes Implement restore callback that Dirk and I agreed on for bat
1250 restore. This fixes bug #928. Restore of backup of zero files fails.
1251 kes Fix SQL Catalog logging which broke with new db_escape_string
1254 Release Version 2.2.4
1256 kes Fix bacula_cats.def for new db_escape_string().
1257 kes Increase size of name string when FD making connection to SD.
1258 May fix bug #953. FD->SD connection failure.
1260 kes Add code to help Dan debug 2drive-incremental-2disk test.
1261 kes Add code to try to fix bug #908.
1262 kes Add waits to multiple exit detection code to try to force pid
1263 file to always be deleted.
1264 kes Restore good dev.tar.gz to rescue set appropriate binary property.
1265 This fixes bug #950.
1266 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
1267 trying to switch drives by checking for blocking before unblocking.
1269 kes Cancel storage daemon in all cases where FD reports error. This
1270 should fix virtually all cases of bug #920.
1271 kes Fix db_escape_string() for MySQL which did not compile.
1273 kes Fix error message that was clobbered when Dir tells SD it does not
1274 have write permission on Volume. This should fix a minor point
1275 in bug #942, but not the main problem.
1276 kes Add code to cancel job in SD if FD connection fails. This should
1278 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
1279 dvl Pass jcr and db into db_escape_string() to enable better escaping
1281 kes Fix migration code to get correct Volume name with multiple volumes
1282 by skipping |. Fixes bug #936.
1283 kes Implement patch supplied by Landon to fix bug #944 where using
1284 TLS with bconsole uses 99+% of the CPU.
1285 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
1287 kes Move patches into patches directory.
1289 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
1292 ebl Using 'm' in bconsole will show messages like before,
1293 and not memory usage.
1294 kes Fix bug #935, and probably also bug #903 where files were not
1295 restored. MediaId was not properly set in JobMedia record after
1298 kes Suppress chown and chmod error messages if the FD is not running
1301 kes Apply Martin Simmons' patch that should turn off the new API usage
1302 when batch insert is turned off allowing building on older
1304 kes Add ./configure search in qwt-qt4 for qwt package
1306 kes Bacula is now free of 3rd party GPL copyrighted code!
1307 kes Remove idcache.c
1308 kes Add guid_to_name.c/h which replace idcache.
1309 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
1311 ebl Detect if new PosgreSQL batch insert API is present.
1312 kes Correct incorrect mempool call causing Director crash. Occurs on
1313 systems without va_copy().
1314 sb Update spec files for 2.2.1 release
1316 kes Fix memory pool call in ua_output.c. bug #934.
1317 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
1318 Add test program to fnmatch.c
1320 kes Integrate patch to README.vc8 from
1321 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
1322 edit it to get it into Unix patch format.
1323 kes Implement mkpath.c to replace old FSF makepath.c
1325 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
1327 Release Version 2.2.1
1329 kes Update POTFILES.in
1330 kes Cleanup a few underquoted AC_DEFUNs in configure
1331 kes Apply patch from Martin Simmons that adds a test for va_copy to
1334 kes Fix bug #921 by increasing the number of tries to create a new volume
1336 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
1337 can be called multiple times. Implement a version for machines
1338 without va_copy() that gets a big buffer.
1340 kes Integrate more portable zone offset code into bsmtp.c
1341 Submitted by Attila Fülöp.
1343 kes Fix bad SD->FD return status reported by
1344 (James Harper) <james.harper@bendigoit.com.au>
1345 ebl Fix a bug in read_close_session which return random status
1346 thanks to James Harper
1348 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1349 and directory names during restore of single file/directories.
1350 kes Add sanity checks to .sql command when string is empty. Hopefully
1351 that will resolve Dirks Director crash.
1353 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1354 in the bsmtp chat subroutine when debug is >= 10.
1356 kes Fix Director crash when running bat SQL queries.
1357 kes Add David's notes on Item 8: Copy pools.
1359 kes Rework projects file to be current and ready for a vote.
1360 kes Enhance lex scanner error message.
1362 kes Tweak LICENSE file to mention BSD code.
1363 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1364 if specified on the ./configure.
1365 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1366 This class is intended to allow us to open a second bsock to the
1367 Director while in the restore subdialog.
1369 kes Fix configure to create bat Makefile before creating dependencies.
1370 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1371 kes Add a tooltip to the tray monitor.
1372 dvl Set the Director's PID file before dropping privs. This fixes
1375 kes Update AUTHORs file
1376 kes Increase the default max concurrent jobs to 20 in FD and SD to
1377 correspond with the default .conf files.
1378 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1379 some different, of the same file created by RN when porting the
1381 kes Rearrange some of the Win32 directories and the placement of the files
1383 kes Set DEVELOPER flag in version.h
1385 ========================================================================
1386 Release Version 2.2.0
1388 kes Apply a second doc patch from Marc.
1389 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1390 improves the tips section that discusses how to setup multiple
1393 kes Update bat README file.
1394 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1395 corrects a typo in the Recycle status check in db_find_next_volume().
1396 This will probably fix a number of annoying problems with multiple
1398 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1399 bnet calls -- no functionality change.
1401 kes Modify the Verify output to specify if files are missing on
1402 the Volume(s) or disk. Fixes confusion in bug #916.
1403 kes When more than one Volume is read in a migration job, the last
1404 Volume bytes reported are from the last read volume rather than
1405 the last written volume. Fixed. This fixes bug #910.
1406 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1407 It previously printed New Recyle flag is: no. This fixes bug
1410 kes Correct seg fault when switching tape drives during restore.
1411 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1412 be used until after 2.2.0 release.
1414 kes Remove fnmatch() in SD that permitted wild card specifications.
1415 This fixes bug #914.
1417 kes Fix %g in filename returned by SQL for browse tree reported by
1419 kes Fix configure so that it puts config.out in the cwd rather than
1421 kes Attempt to fix the locking problem reported by Eric in bug #906.
1422 kes Make berrno class to leave errno unchanged after constructor call.
1423 kes Make bnet_server use the heap rather than the stack to allocate
1424 its socket fd pointers to avoid a crash at termination. Problem
1425 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1427 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1428 and putting it in depkgs-qt along with Qt4.3.
1430 kes Rework code in acquire.c that switches drives for reading when
1431 the Media Type does not match. This should fix bug #906
1433 ebl Fix a director segfault during job setup #907
1434 kes Correct seg fault in postgresql when first operation returns no
1435 rows. Fixes Dirks File browser problem seg fault with bat.
1437 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1438 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1441 kes Implement PopUp YES/NO dialog for bat.
1443 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1445 kes Correct RunScript to terminate job in FD on failure.
1446 kes Change abort_on_error and AbortJobOnError to fail_on_error
1447 and FailJobOnError in RunScripts.
1448 kes Minor tweaks of code formating in RunScripts, principally to
1449 avoid depassing 80 columns.
1451 kes Eliminate one #ifdef Win32 in bsmtp
1452 kes Implement grow tool to grow a file for testing very large databases.
1453 kes Add big-vol-test to test Bacula seeking with > 5GB.
1456 kes Modify find_next_volume() to return all values in Media record.
1457 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1461 kes Update Release notes
1463 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1464 Warning, in previous beta version, all media get from scratch keep their
1467 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1468 This should fix bug #842. Made a note to look at removing the temp
1469 files at the end of the install.
1470 kes Add ability to mount and unmount a file device providing it is
1471 marked as being removable and has the appropriate mount and unmount
1472 commands defined in the Device resource. This fixes bug #830.
1473 kes When applying a storage override, release all previous storage
1474 definitions rather than just prepending the new storage.
1475 This should prevent a good deal of confusion.
1477 kes Implement ./configure search for qwt libraries.
1479 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1480 Win32 FD. This should fix bug #893.
1481 kes Remove an unnecessary beep in Win32 init code.
1482 kes Update copyright dates in Win32 executable about boxes.
1483 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1484 code with a BSD getopt.c and getopt.h.
1485 kes Remove sched.h from the Win32 compat directory -- not used.
1486 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1487 need to shut it down, do it through the services panel or the command
1489 kes Remove some inappropriate Bacula FSFE copyrights.
1490 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1491 kes Fix regress config non-portable test as pointed out by
1492 Florian Heigl <florian.heigl@gmail.com>
1493 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1494 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1496 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1497 Reported by Frank Sweetser.
1501 kes Fix client-only build.
1502 kes Integrate client-only fixes for bsys (initgroups) and conio from
1503 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1504 kes Make arguments to get_scratch_volume() in same order as other
1506 kes Rework the prune_volumes() subroutine so that after purging and
1507 no volume found in desired pool, it will check for a scratch
1508 volume. This prevents recycling the whole scratch pool.
1509 kes Add code to status storage to print boffset_t (largefile support).
1511 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1512 kes You now need a --with-qwt=<dir> to be able to build bat.
1513 kes Update src/win32/cats/bacula_cats.def to include the new
1514 db_get_query_dbids() call on Win32.
1516 kes Correct a problem when selecting a scratch volume and moving
1517 it to another pool that lost some columns.
1518 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1519 kes Enhance Autochanger error messages to include Volume and device name.
1520 kes Rework prune_volumes() code to take account of InChanger flag,
1521 and to handle recycling volumes going to the Scratch pool and
1522 current pool because the RecyclePool directive.
1523 kes Implement a better and more efficient db_get_query_dbids() to
1524 handle creating and passing back a list of DBIds.
1528 kes Start work on new more efficient DBId subroutine. First use
1529 will be for recycling volume to Scratch inchanger.
1530 kes Increase number of JobIds in pruning from 1000 to 10000.
1531 This to be replaced by above routine.
1532 kes Begin implementation of building Qt4 on Win32.
1533 kes Correct typo in fix I added for bad TLS shutdown.
1534 kes Pull 2.0.3 patches into patches directory.
1535 kes Update Release notes. Include qt-console in line count.
1536 kes Update Projects file.
1538 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1539 bug in migration code where a job that spanned two volumes
1542 kes Implement new BST_DESPOOLING blocked state. Change from locking
1543 during despooling in SD to blocking. This means that other threads
1544 can work with the device structure, in particular the reservations
1545 system while despooling.
1547 kes Fix return in reservation message queue that missed clearing
1548 the jcr lock (implemented 26Jun07 below).
1549 kes Rename a number of dev methods to make locking function names
1551 kes Document locking in lock.c. Move lock structures to new file
1554 kes Move reservations message lock to lock jcr only this
1556 kes Move main SD locking code into lock.c (new file).
1557 kes Update Win32 build to include lock.c
1561 kes Dirk committed the qwt library code for drawing graphs in bat.
1562 kes Tweak install of qwt so that it is integrated with ./configure.
1564 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1565 out by Eric (my typo).
1566 ebl Fix configure.in to get batch mode enable
1567 kes Return correct string from authenticate.cpp in bat when connecting
1569 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1570 spurious line drops when using TLS.
1571 kes Do not file reparse points when restoring a file that already
1574 kes Implement Windows reparse points -- similar to directories, but
1575 we do not descend into it. This is a first cut. They seem to
1576 be backed up, but restore is not yet tested.
1577 kes Remove restore_blocking in tls code when shutting a socket to leave
1578 it in blocking mode. Hopefully this will fix the encryption bug
1579 reported by Frank Sweetser.
1580 kes When opening a file for backup, tell the OS that we are going to
1581 read it sequentially -- optimization.
1582 kes Change variable names in authenticate_director() to not conflict
1583 with member names in bat. Caused great confusion with compiler,
1586 kes Queue openssl error messages in case of comm problem.
1587 kes Do shutdown() call if socket terminated.
1588 kes Remove some duplicated code in tls.c
1589 kes Move more of the bsock member variables into private and access
1591 kes Add Frank Sweetser's tls-test to the regression suite.
1593 kes Add Swedish sv.po file
1595 kes Don't print clock skew message in FD if less than 3 seconds diff.
1596 kes Add a bit of VSS info to status client.
1597 kes Implement a first cut of Vista VSS, using Win2003 code.
1599 Release: 2.1.20 beta
1601 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1602 loaded tape but uses first drive).
1603 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1604 This was indeed a Win32 issue.
1606 kes Simplify search of autochanger for in-use Volume.
1607 kes Fix exit condition of check for in-use volume. kes Remove
1608 inappropriate my_postgresql_free_result() in db_close()
1610 kes Fix bad return in FD when encryption signature not found.
1611 Probably caused a crash.
1612 kes Inhibit missing encryption signature error messages for
1613 file types where no signature computed.
1614 kes Correct inverted check on autochanger in reservation system.
1615 kes Tweak debug code in autochanger reservation.
1617 kes Add some additional locking in the cats directory in subroutines
1618 that modify packet variables called from batch insert.
1619 kes Rework how dcrs are allocated. new_dcr() can now be called
1620 with an existing pointer, and it will simply clean it up.
1621 This allows the reservation system to test various different
1622 devices, and will permit easy device changes.
1623 kes A bunch of changes all over to handle new new_dcr() calling
1625 kes Work more on the Volume management in the SD. Remember Volumes
1626 for tape drives and for autochangers (even virtual disk changers).
1627 kes When looking at the Volume list to reserve a drive, handle
1628 autochanger names correctly by interating through the changer
1629 devices. Also call the Director to see if a Volume is suitable
1630 for the current job.
1631 kes Fix some bugs in bscan. Make sure all media records are written.
1632 Make sure that valid JobMedia records are written for disk files.
1633 Previously they were completely wrong.
1634 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1635 that the URLs don't change and so that the developers will all
1636 work off the same copy. Rebuild from scrach.
1637 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1639 Release: 2.1.18 beta
1641 kes Fix seg fault in FD from incorrect digest size.
1642 kes Fix argument to non-OpenSSL crypto.c subroutine.
1644 Release: 2.1.16 beta
1646 kes Remove a few malloc()s from the encryption code.
1647 kes Use the class calls to bsock in filed/backup.c and restore.c in
1648 place of the old bnet_xxx code.
1649 kes Implement code that does an on the fly calculation of the
1650 signing digest during restore of encrypted files. It makes
1651 a best guess at the algorithm, and if it is not correct, will
1652 then revert to the old code which reads the file after it is
1654 kes Implement at least one missing crypto stream in stream_to_ascii()
1655 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1656 #877 where a reload with bad syntax causes Dir to exit.
1658 Cut: 2.1.14 beta (not released)
1660 kes Do not free a volume on a tape drive until another volume is
1661 mounted and read, or the autochanger unloads the volume.
1662 This should help the SD re-use volumes that are already mounted,
1663 and should fix bug #886.
1664 kes Apply patch from user brettedgar that allows gnome2-console include
1665 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1666 kes Apply patch from Lucien Weller that fixes day of week calculation
1667 because of DST flag problem. Fixes bug #887.
1669 kes Move find_next_appendable_volume() to after acquiring a valid device
1670 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1672 kes Unable to reproduce bug 872. However added additional testing for
1674 kes Bug #874 resolved by documenting SQLite limitations.
1675 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1676 kes Bug #881 resolved by removing typo in mtx-changer script.
1677 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1678 approval. Added a link to the wiki on the web page, and implemented
1679 a backup from http://paramount.ind.wpi.edu
1681 kes Fix update allfrompool to pass pool name.
1683 kes Convert to pure GPL v2 license.
1684 kes Fix sscanf problems reported by Peter Buschman that caused
1685 a bus error on Solaris.
1686 kes Rework (simplify) the select prompt in bat.
1687 kes Move get_jobid_from_tid() into lib and create a
1689 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1690 should definitely fix the problem of lost error messages in the
1692 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1693 kes Eliminate tcpd.h from the project. Enclose the #include from the
1694 library with extern C ...
1695 kes Add print of signal name when a signal is trapped.
1697 Release: 2.1.12 beta
1699 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1701 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1702 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1703 makes SQLit3 run 30 times faster, though a bit less safe.
1704 kes Implement --with-batch-insert in configure and detection of thread
1705 safe libraries. It is on by default, but turned off if no thread
1706 safe library (e.g. SQLite 2) is available.
1708 kes Fix Bacula PostgreSQL buffer overruns.
1709 kes Do better checking for NULL results returned from PostgreSQL;
1710 implement retry for failed queries; clear results buffer after
1711 failed query. Hopefully this will correct the PostgreSQL failures.
1713 kes Implement algorithm to handle only one appendable volume with
1714 Prefer Mounted Volumes = no.
1715 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1716 returned from a query.
1717 kes Make volume lock recursive.
1718 kes Implement an additional volume reservation algorithm that
1719 starts by considering all reserved volumes then uses the
1720 old brute force algorithm of searching the resources to
1721 find a suitable device.
1722 kes Add new reservations debug code and refine the old code.
1723 kes Update the win32/dll/bacula.defs file.
1725 kes Tweak reservations algorithm to permit a few more cases, i.e.
1726 volume reserved, but on different drive, ...
1727 kes Enhance SD status to include Pool and Media Type for drive in a
1728 more readable format (a bit longer).
1729 kes Fix PostgreSQL double free.
1731 kes Minor refactoring of restore decryption code.
1732 kes Add code to smartall.c to detect double free of a buffer.
1734 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1735 so that bsmtp will create a correct email address (mailbox only).
1736 kes Modify 'memory' command so that the buffers are listed as 'In use'
1737 to avoid confusion with Orphaned buffers.
1738 kes I reworked the OpenSSL include/lib flags to be handled in
1739 the standard Bacula way, which should fix bug #863 concerning
1740 non-standard OpenSSL libraries.
1742 kes Implement Help Browser window for bat.
1743 kes Fix reload bug that reset StorageId to zero.
1745 kes Fix TLS #ifdefing when TLS turned off.
1746 kes Ensure that when labelling a tape with Slot=0 that InChanger
1748 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1750 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1751 add DISTINCT (required by PostgreSQL).
1752 kes Implement BSOCK authenticate_director() method. Eventually will
1753 authenicate all daemons.
1754 kes Move several more functions into the BSOCK class.
1756 kes Add code to tell the OS that we no longer need a cached
1757 file that we were reading. In findlib/bfile.c. Also,
1758 only cache files that we are reading. Thanks to
1759 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1760 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1761 kes Implement script to automatically generate cats and dll .def
1762 files for Win32 dll.
1763 kes Update README.mingw32 to include new .def file generation.
1764 kes Correct typo in UTF-8 error message as reported by:
1765 jhernandez <julianhernandez@gmail.com>
1766 kes Add additional sm_check() code on debug level 1.
1767 kes Set default debug level to 1.
1768 kes Trap SIGABRT in attempt to get traceback.
1770 kes Reduce bat connect timeout from 30 to 15 seconds.
1771 kes More restructuring and implementing BSOCK class in place of
1773 kes Remove a few unnecessary malloc() tests in crypto code.
1774 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1775 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1776 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1778 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1780 kes Fix Verify InitCatalog. The attributes were not pointing to the
1781 correct saved location.
1782 kes Implement message callback so that GUI is sure to get all
1783 daemon messages. Currently displayed in a dialog in bat.
1784 kes Ignore SIGUSR2 (Bacula timer) in bat.
1785 kes Apply regress patch from bug #859 to allow regress to work
1786 with Solaris compiler.
1788 kes Begin adding TLS support to bat.
1789 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1790 clean up lex.c and make it more readable.
1792 kes Move more bnet functions into the BSOCK class.
1793 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1794 kes Complete change of berrno strerror() method to bstrerror()
1796 Release: 2.1.10 beta
1798 kes Cleanup incorrect email addresses in bsmtp.
1799 kes Make bat display initial messages rather than discard them.
1801 kes First cut of adding .mod to the run command.
1802 kes Implement auto display of messages in bat.
1803 kes Enhanced preferences to allow all Bacula output to be
1806 kes Try to make bsmtp date routines more generic.
1807 kes Fixed bug #856 autochanger documentation.
1808 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1809 kes Add new cats entry point so Win32 builds.
1811 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1813 kes Do better checking for the MySQL 64 bit libraries looking for both
1814 .a and .so libraries.
1815 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1816 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1817 kes Require the thread safe version of MySQL during configure. Thanks
1818 to Andre Noll for pointing this out.
1819 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1820 continuing in migration code.
1821 kes Apply implementation of tray-monitor font derived from gnome-console
1822 submitted by Andreas Piesk <a.piesk@gmx.net>
1824 kes Eliminate important memory loss in SQLite
1825 kes Fixed the batch insert MySQL thread specific data that was not
1826 being freed. See cats/mysql.c:db_thread_cleanup().
1827 kes Fix restore before command.
1828 kes Convert old hdr.name to name() in a few places.
1829 kes Implement update jobid command.
1830 kes Return all time_t dates in db_get_job_record()
1831 kes Stop watchdog in SD earlier.
1832 kes Put Pool just after Storage in please mount message.
1833 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1836 kes Update the po files.
1837 kes Fix Verify InitCatalog by making it cache attributes.
1839 kes Change name bacula-bat to bat for man 1 page to correspond to
1841 kes Check for client and store NULL pointers in status command. This
1843 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1844 kes Fix sign extended editing of %p.
1845 kes Clean out a little old #ifdefing in cats/mysql.c
1847 kes If time diff between DIR and FD is more than 600 seconds convert
1848 INFO message to WARNING.
1849 kes Implement heap size display in status for all daemons.
1850 kes Attempt to fix MySQL db open memory loss (not successfull).
1851 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1852 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1853 Query. This looks like a MySQL but but by doing extra releases,
1854 the memory goes away. This should fix bug #847.
1856 kes When backup fails, cancel SD before waiting for sd termination.
1857 kes If SD is waiting for FD to connect during cancel, wake up the
1859 kes Fix fsf code so that errno is correctly reported.
1860 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1862 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1863 so that Bacula doesn't later stumble into a seg fault.
1864 kes Use the term Restore Client in the restore Job report.
1865 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1866 the original job's FileSetId.
1867 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1868 spooling in migration jobs. Not yet tested.
1869 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1870 reading conf file from a pipe. However, do it with open_bpipe()
1871 rather than popen. Not yet tested.
1873 kes Fix an ugly bug where the VolCatBytes were getting updated
1875 kes Implement bconsole memory command that prints current memory
1876 usage, plus smartalloc dump.
1877 kes Clarify some error messages in backup, admin, and migrate.
1878 kes Shrink label dialog to smaller size.
1879 kes Invert Cancel OK buttons on restore to be OK Cancel.
1880 kes More strerror() to bstrerror() conversions.
1882 kes Start implementing bstrerror() in place of strerror().
1883 kes Stripping path -- seems to work.
1885 kes Prevent door and port files from being restored (mostly
1887 kes Free an unreleased buffer in compat code.
1888 kes Change console Job name from *Console* to -Console- to eliminate
1889 Win32 filename problems. Put Win32 path separator when creating
1890 Console file. This fixes bug #846.
1891 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1893 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1895 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1896 to force Win32 error message.
1898 kes First cut strip path. The data should be passed to the FD,
1899 but nothing is done with it yet.
1900 kes Enhance the digest and signature routines in the crypto
1901 library to accept a JCR and to use it to print error messages
1902 so that they will go in the Job report rather than the daemon's
1904 kes Simplify some of the verify signature code.
1905 kes Simplify a few of the alternative returns in the signature
1908 ebl Use only POSIX regex instead of GNU regex in breg.c for
1909 File relocation. It fix broken freebsd compilation.
1910 kes Convert all other Dir files to use new ua class message
1912 kes Tentative fix for missing digest signature in bug 807.
1913 kes Correct handle problem in new win32_ftruncate routine.
1914 kes Convert ua_purge.c and ua_update.c to use new ua class
1915 message routines for bat.
1917 kes Correct incorrect installation of LICENSE in Win32 installer.
1918 kes Display LICENSE at the beginning of the Win32 install.
1919 kes Attempt to correct the need for the png files to be installed
1921 kes Reapply my bat.conf install script in qt-console. I think I
1922 editted bat.pro instead of bat.pro.in and it was lost.
1923 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1924 the /var/lock/subsys for subsysdir. Also corrects typos in the
1927 kes First cut update job.
1928 kes Correct configure to include qmake of src/qt-console directory.
1930 kes Make restore job yes/mod/no print in one command so GUI works.
1931 kes First cut implementing backup and restore client.
1932 kes Correct editing in Verify output that caused a seg fault.
1934 kes Insure that bat.conf is not overwritten during installation.
1935 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1936 while I was implementing migration in March 2006 !
1938 ebl Cleanup file relocation, using char *RegexWhere instead of
1939 char *where + bool where_use_regexp
1940 kes Update some manpages and add bat manpage.
1941 kes Make a first cut at converting bacula.spec.in for bwx-console
1943 kes Apply patch from John Goerzen to add hostname as fourth argument
1944 to make_catalog_backup script.
1945 kes Fix typos I introduced into bsmtp.c
1946 kes Make pm_strxxx() routines handle input of NULL pointer. This
1947 is to protect from NULL pointers returned from SQL databases.
1948 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1949 kes Add more debug to FIFO code -- fix fifo regression test.
1951 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1952 kes Add thread timer to bnet_connect() to break from OS if wait time
1955 kes Update Win32 build to include new files, new symbols, and
1957 kes Implement socket level heartbeat (tcp_keepidle)
1958 ebl Commit File relocation patch
1959 kes Make bat have 'make install' target.
1960 kes Warn during install if old gnome-console binary found.
1961 kes Warn during install if old wx-console binary found.
1962 kes Add -8 option to bsmtp command line to add content type utf-8.
1963 Fixes bug #809. (Character coding problem in bsmtp).
1964 kes If < is found in target (from, to, cc) then do not enclose the
1965 target in < > in bsmtp. Fixes bug #772 (malformed address).
1966 kes When printing certain items in dbcheck, stop after 300000.
1967 Fixes bug #822. (dbcheck loops).
1968 kes Incorrect status in Dir after waiting for mount with poll set.
1971 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1973 kes Print waiting to reserve a device every 5 mins.
1975 kes Don't call close_part in label.c if tape and relabel.
1976 kes Don't free volume if busy in close() -- should help with
1978 ebl Fix #824 RunScript bug (After script could be execute twice)
1979 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1980 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1981 Add a regression script to test RunScript
1983 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1986 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1987 deprecated. No additional bugs will be fixed, and they will be dropped
1988 in a future release (probably 2.4.0).
1989 kes Change name of wx-console to bwx-console to make it more Bacula
1991 kes Change the name of gnome-console to bgnome-console to make it
1994 kes Some time in March, a Feature Request with patch from Jorj Bauer
1995 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1997 The ability for the director to validate a Client (FD) CN against
1998 an arbitrary set of patterns rather than the hostname, with
1999 A new 'TLS Allowed CN' set of directives which are implemented
2000 in the Client resource. Then pattern matching is used in place
2001 of hostname matching against the Certificate's CN. As an example, we
2002 have certificates which (a) use a local CA, and (b) have a CN of the
2004 kes Add new/changed entry points to Win32 build
2005 kes Create unaccepted-projects for projects that are not accepted.
2006 kes Simplify locking in the reservations system.
2007 kes Add more debug code in reservations.
2008 kes Make sure error condition on reserving a volume is handled correctly.
2009 kes Correct handling of volume_in_use.
2010 kes Correct handling of initializing a device.
2011 kes Move handling of broadcasting releasing a device into release_device().
2012 kes Correct attaching dcr to dev so that it is only done if device
2013 is properly initiated.
2015 kes Locking debug level tweaks in SD.
2016 kes Tweak new Volume code.
2018 kes Add exec external-command [wait-seconds] to bconsole. This
2019 executes the external-command. Note! normally external-command
2020 should be enclosed in double quotes.
2021 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
2022 it should normally be off in a production system.
2024 kes Implement die command for SD so that we can force it to dump.
2025 kes Implement SD lock debug code.
2026 kes Implement new algorithm for keeping Volume list in SD. It
2027 is now owned by the device.
2029 kes Implement new code for freeing in use volumes that should
2030 resolve if not all, some of the problems of multiple drive
2031 tape conflicts described in bug 801.
2033 kes Fix gui/bacula-web/images files in svn.
2034 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
2036 ebl Fix a bug in batch mode (in string escape)
2037 kes Correct migration prune SQL typo that crept in in a
2038 recent 2.1.x change.
2040 kes Move bnet_despool() into class in bsock.c
2041 kes Modify job report to include director name and Build OS.
2042 kes Move drop root privilege and check_catalog() before fork.
2043 kes Add update database scripts (version 9 to 10) to updatedb directory.
2045 ebl Check size and age of each file after its backup to see if
2046 it has changed during backup, if 'checkfilechanges' is set.
2047 The FD will do an extra check (stat(2)) after
2048 each file backup. mtime, ctime and size are compared with
2049 'before backup' information. If time or size mismatch, an
2050 error message will be generated. You must upgrade FD to use it.
2052 kes Make database name and user configurable
2053 --with-db-name=xxx --with-db-user=xxx
2054 kes Add back database type to message.c for debugging.
2056 kes Implement dir_sql() which issues an SQL query.
2057 kes Modify bat medialist to use dir_sql() and do some minor C++
2058 formatting as well as eliminating a number of pointers, simplifing
2061 kes Fix some of the mtx-changer grep commands for tape label readers.
2062 kes Convert a number of bsendmsg into the appropriate send/warning/error
2063 message class calls.
2064 kes Suppress the using database message in the .sql command.
2065 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
2067 kes Add context menu for floating a window.
2068 kes Some minor cleanup and name changes in qt-console
2069 kes Add doing mt setblk 0 in Win32 mtx-changer.
2070 kes Apply Martin's bug fix to move definition of ENODATA for
2072 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
2073 sqlite2 and sqlite3.
2075 kes More pruning cleanup.
2076 kes Turn on wait_for_drive by default in mtx-changer.
2077 kes Turn on Batch insert code by default as it now passes regression.
2078 kes Add ./configure --enable-bat to enable building of Bat.
2079 No install yet though.
2081 kes Implement a new .sql command for bat.
2082 kes Implement code to turn off pruning in obtaining the next volume.
2083 Pruning is turned off for the status dir command, but turned on
2084 for SD requests and for the list nextvolume command.
2086 kes Correct Qmsg() that was not updated correctly when committing a
2087 previous change (probably the recent TLS patch).
2089 kes Write new subroutine is_volume_purged() that explicitly checks
2090 if the Volume is purged, and if so marks it as such. This should
2091 resolve problems reported about needing to mount twice to recycle
2093 kes Rewrite pruning algorithm to do more work in the SQL engine, and
2094 to pass a list of JobIds to be deleted to SQL. Also, minimize the
2095 amount of duplicated code.
2096 kes Do volume pruning only for the Media Type desired (reduces pruning time
2097 if multiple Media Types are in the same pool).
2098 kes Implement more detailed info in the Job report for the Bacula version
2100 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
2102 ebl Add bbatch tool to bench database and insert mode.
2103 Fix sql quote stuff in batch mode
2104 Fix sql stuff for mysql
2106 kes Correct problems with am/pm scheduling. Fixes bug #808.
2107 kes Implement new prunning code that prunes up to 1000 jobs at
2108 the same time. The same technique can be applied to a number
2109 of other prune/purge subroutines.
2110 kes Add an insanity check when starting a new tape job to ensure
2111 that the tape position has not been changed. If so fail the
2113 kes Fix Win32 build for dlls to add the folllowing:
2114 src/lib/bsock.c -- new file with new entry points
2115 src/lib/dlist.c -- new entry points
2116 src/cats/sql_create.c -- new entry point
2117 src/cats/sql_cmds.c -- new DATA item exported
2119 ebl batch mode cleanup bscan-test is ok now.
2120 kes Implement SD code to check length of disk volume before appending.
2122 kes Correct return status on db_batch... routines.
2123 kes Add call to db_write_batch_file_records() to migration code.
2124 ebl Fix AfterJob timing
2125 kes Move the checking of the database in initializion of the Director
2126 to after we drop privileges. This avoids the need for both root
2127 and bacula access to the DB.
2128 kes Correct a misplaced variable definition in src/filed/backup.c
2129 kes Correct how the new batch insert db_create_attributes_record()
2130 uses the arguments. Caused a seg fault in bscan.
2131 kes Implement lock() and unlock() methods in DEVICE class.
2132 Implement block() and set_block(xx) methods in DEVICE class.
2133 kes Modify bnet_connect() so that it uses time() to check for the
2134 wait time expiring (on some OSes, some system calls may not
2135 return immediately).
2136 kes Modify Verify to obtain the previous JobId when it is actually
2137 running rather than at schedule time (as it was in 1.38.x).
2138 kes Fix src/job.c to handle MaxWaitTime correctly. This should
2140 kes When checking pid in pid file, continue running if the pid is
2141 the same as ours. This occurs on IRIX after a system crash.
2144 kes Extend new GUI API.
2145 kes Make the ua structure a class, and implement send_msg(),
2146 error_msg(), warning_msg(), and info_msg().
2148 kes Apply fix from for building wx-console on the Mac from
2150 kes Implement new select mechanism for GUI programs.
2151 kes Reorganize initialization of stackedWidgets in bat.
2153 kes Add updated nagios plugin supplied by Christian Masopust.
2155 kes More bat implementation.
2156 kes File migrate bug with Pool Occupancy using mediaid instead
2157 of jobids. Fixes bug #795.
2158 kes Fix orphaned buffers in filed backup and verify due to
2159 crypto buffers not freed during errors. Fixes bug #789.
2160 kes Extend new GUI api code to tree commands.
2161 kes Ensure that tree and dot commands check console ACLs.
2162 kes Permit marking directory with trailing slash.
2163 kes Allow 20 console connections (instead of only 10).
2165 kes Add smartctl call to bacula-sd.conf as an example of getting
2168 kes Modify jobq.c to let simultaneous restore jobs run. This may
2169 cause them to fail if they cannot get a drive.
2170 kes Add Client Connect Wait to Storage daemon to permit users to
2171 modify the time the SD waits for a FD connection.
2173 kes Correct virtual changer check which was backwards. This caused
2174 volumes to be unloaded into slots already occupied.
2176 kes Apply Command ACL filter to JobId list in restore command.
2177 kes Correct typeo in var.c patch.
2179 kes Don't let Bacula prune File or Job records for the current Job.
2180 kes Fix variable substitution pad + inc bug reported (with patch)
2183 kes Correct SQLite log table index as reported by Luca Berra.
2185 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
2187 kes Begin implementing new comm signals for API.
2188 kes Fix a few places in lib/message.c where the open fd may
2190 kes Continue implementing lib/bsock.c (real class). Make jcr,
2191 who, host, and port private. There are new methods to access
2192 them for non-class use. This required touching a number of files.
2194 kes Add LANG=C to autoconf/randpass so it works with languages other
2195 than English. Fixes bug #788.
2197 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
2199 You will not be able to generate Include/Exclude list any more.
2200 It will be fixed soon.
2201 If you want to use this, you can apply
2202 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
2204 kes Restore of sockets created false error messages because Bacula
2205 no longer restores sockets, but the code was still trying to
2206 set the attributes on a non-existent file. Reported by a user.
2207 ebl finish RecyclePool feature
2208 Media will takes Pool.RecyclePool
2209 when moving from Scratch to a Pool or when user will do
2210 update volume=xxx frompool
2211 To use it, add RecyclePool = aPool to your Pool resource
2214 RecyclePool = Scratch
2218 kes Expand new BSOCK class adding signal() and new BNET signals.
2219 kes Begin enhancing the dot commands adding a new API function
2220 that returns more information and will make it easier
2221 to interface to the Director from a program.
2223 kes Make DEVICE fd private. Its new name is m_fd, and can be
2224 obtained with dev->fd() outside the class. This is the
2225 first of many DEVICE members to be made private.
2226 kes Implement Michael Renner's idea on having a virtual disk
2227 changer. I made some minor modifications (e.g. I did not
2228 implement the Virtual Changer directive, but simply set
2229 the Changer Command to an empty string.
2231 kes Implement a BSOCK send() method that writes the whole record
2232 in a single write() request rather than in two.
2233 ebl add update volume=xxx recyclepool=yyyy
2234 volume takes recyclepool from pool when using update volume=xxx from pool
2236 kes Fix encryption deblocking bug, which caused some restored files
2237 to be truncated. This fixes bug #763.
2238 kes Add FD event sequence order prepared by Eric -- for RunScripts.
2239 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
2241 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
2242 ebl Use btime_t instead of uint64_t in media patch.
2244 kes Optimize the use of the database a bit in the Status dir command.
2245 Only open it when needed, ensure that if any previous database
2246 was opened, it is closed.
2248 kes Correct VolCatBytes bug from media patch.
2249 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
2250 in the case of orphaned records.
2251 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
2252 and File records in 300K chunks to be more efficient. This
2253 idea came from Juan Luis Frances (if I remember right).
2254 kes Apply Eric's scratch patch that moves a purged Volume to
2255 the RecyclePool. Question: how is RecyclePool set? what
2256 happens to the ScratchPool?
2257 kes Apply Eric's media patch that collects read/write media
2258 times as well as byte counts. This patch requires a
2259 simultaneous upgrade of the DIR and SD. Note, there
2260 should be some way to turn off timing. I'm not sure
2261 times are in Bacula units.
2262 kes Apply Eric's batch-insert patch.
2264 kes Update projects list.
2266 kes Implement Include/Exclude file lists in FD as dlists using
2267 the new dlistString class. This permits efficiently having
2268 large include/exclude lists and completes project Item 25.
2269 kes Fix dird/ua_cmds.c so that a cancel command checks if the
2270 console is authorized to cancel the job. This fixes bug
2272 kes Modify SD so that the VolCatJobs medium record is updated
2273 at the beginning of a Job rather than the end. This
2274 fixes bug #775 where exceeding MaxVolJobs caused jobs
2276 kes Added a mutex around getting and setting Volume information
2277 so that multiple simultaneous jobs will single thread.
2279 Switch to using Subversion
2280 kes Remove src/pygtk-console/ from configure
2282 kes Delete src/lib/btree.c from win32 build, then add rblist.c
2283 plus the entrypoints.
2284 kes Apply patch supplied that corrects debug print
2285 in canceling jobs for max run time. Supplied as
2286 part of bug #621, which was previously fixed.
2288 kes Test on job_canceled() and sd_msg_thread_done inside
2289 loop starting the message thread to avoid a race condition.
2291 kes Remove rl_catch_signal from console.c as it conflicted
2292 with the header definition. Fixes bug #765.
2293 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
2295 kes Clarify some stored/acquire messages to indicate if the
2296 problem is with read or append.
2298 kes Fix memory leak with storage ids in cats/sql_get.c
2299 kes Terminate watchdog earlier to avoid reference to released
2300 memory -- reported by Jason Austin.
2301 kes Move closing the database from jobq.c to the director daemon
2302 termination routine. This fixes memory leaks for shadow jobs
2303 (i.e. migration jobs).
2304 kes Free up the unique jobid chain items in migrate.c. This fixes
2305 a memory leak problem.
2306 kes Convert some ugly looking for statements to use foreach_alist
2307 in findlib/find.c. This will facilitate converting the structures
2308 to use dlist (for large include/exclude lists).
2309 kes Fix a bug in the btree.c and btree.h routines, then rename them
2310 rblist and add them to be built in src/lib. Include some new
2311 methods written by Rudolf Cejka that make the code more readable
2312 (hides some of the ugly casting).
2313 kes Add set_next() and set_prev() methods which make the code much more
2314 readable. Also add a new dlistString class that facilitates storing
2315 strings in dlists. To be used in the large include/exclude lists.
2316 kes Make some trivial modifications to lib/tree.h that use rblist
2317 rather than dlist for storing the tree links. This was suggested
2318 by Rudolf Cejka. The result of this is that the restore tree now
2319 uses red-black binary trees rather than simple linked lists. This
2320 should give rather dramatic speed improvements for directories
2321 contining large numbers of directories/files (more than 10000).
2323 kes Fix maxruntime bug #621.
2325 ebl Implement the include JobID in spool file name project.
2326 kes Reorder projects file in order determined by Jan 2007 vote.
2327 kes Implement item #12 on project list -- quick release of FD by
2329 kes Fix open of SQLite3 db where user does not have write permission
2330 so that DIR does not crash. Fixes bug #761.
2332 kes Add back missing @ in Win32 Makefile.
2333 kes Change 'Device not configured to autolabel' from INFO
2335 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
2336 which should restart an indefinite # of times.
2337 kes Fix configure --help to print --with-mysql[=DIR]. Same for
2338 other DIR specifications.
2340 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
2341 Fix path quoting in SQLite scripts.
2342 Fix problems with SHGetFolderPath.
2344 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2346 kes Fix Job restart on error bug that promotes an Inc to a Full
2347 backup. This should fix bug #755.
2348 kes Add qt-console and first cut of code.
2352 kes Fix Bacula->Documentation link on Win32 to point to index.html
2353 instead of bacula.html. Fixed bug #750.
2354 kes Return JobId in db_get_job_record() when JobId==0. This should
2356 kes Do not release source pointers when restarting a failed job.
2358 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2359 This *should* fix bug #747.
2360 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2363 kes Modify USTORE constructor to set an empty store_source string,
2364 and don't copy the store_source string in a cancel. Hopefully
2365 this will fix Arno's seg fault, bug #744.
2366 kes Add back code to disable conio in configure. Fixes bug #743.
2367 kes Correct the Options scanner in the FD to correctly handle
2368 SHA1 option, which was eating the next option. Reported by
2370 kes Add code to indicate when the SD is spooling, spool wait, and
2371 despooling as requested by Alan Brown.
2373 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob