1 Technical notes on version 2.5
5 command separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
6 examples/database/dbcheck.sql
7 enhancement to wait command: wait mount ...
9 filepattern (restore with regex in bsr)
14 kes Use jcr stored in bsock rather than searching in getmsg.c.
15 This results in about a 5% speed improvement with four
17 kes Implement win32_chmod that uses wide characters, if possible,
18 to get and set the file attributes.
20 kes Apply pane freezing during updates patch from Riccardo Ghetta.
21 kes Rework next_vol and autoprune a bit due to failure in
22 recycle-test. prune_volumes() now returns no status,
23 but should prune at least one Volume, if possible.
24 kes Modify check_if_volume_valid_or_recyclable to reject a
25 volume with Recycle set off.
26 kes Modify prune_volumes() to continue if volume Recycle is off
27 or if the volume has expired. Add more debug.
29 kes Fix bug #1046 VolumeToCatalog incorrectly reports mounted
30 filesystems as missing on the Volume.
31 kes Rewrite the set_jcr_job_status() code to include job status
32 priorities so that more important status changes occur but
33 lower priority status changes will not overwrite something
34 more serious. This could possibly cause reporting incorrect status
35 reporting in some cases. More testing is needed to ensure
36 I have the right priorities. This vastly simplifies the previous
38 Verify Diff status should now be correctly reported, whereas it
40 kes Reduce some debug output.
41 kes Apply Joao's patch to SQLite tables to make chars work.
43 ebl Fix #1175 About update slots that don't reset InChanger flag when
45 ebl Fix #1173 where prune_volume() returns a volume from the scratch.
47 kes Remove jobq.c constraint that read and write SD must be
48 different. This may lead to more deadlocks in the SD,
49 but they should be resolved there.
50 kes Ensure that job report is always printed even if job is failed
52 kes Don't print job report twice for failed VBackup jobs.
54 kes Fix editing of retention time difference to use 64 bit
55 int instead of 64 bit unsigned. This should permit very
56 long retention periods.
57 kes Implement code to prohibit a write job from appending to a
58 Volume that will be used for a read operation. This is
59 new code and could possibly cause some conflicts.
61 kes Integrate James Harper's Exchange Win32 plugin patch.
62 kes Apply patch from Marco van Wieringen that implements the new
63 Solaris libsec interface for ACLs so that Bacula can save and
64 restore both the new ACLs and old ACLs.
65 kes Marco's patch also corrects the file dependency generation code
66 so that it works properly both with shared libraries and static
68 kes Marco's patch also includes a small cleanup of the cats Makefile
69 to remove some references to non-existent files.
71 kes Modify win32 Makefiles to use full paths in most cases.
72 In particular add MAINDIR environment variable that points
73 to the main Bacula source directory.
75 kes Add read volume list code to SD -- not yet used.
76 kes Add James' binutils patch
77 kes Split volume management code out of src/stored/reserve.c into
79 kes Modify configure to do an automatic make clean. This ensures
80 that any changes to ./configure options are handled correctly.
82 Beta version 2.5.16 release:
84 ebl Rename JobStat table to JobHistory
85 kes Ensure that only normally terminated jobs are migrated.
87 kes Add Makefile dependency when using LIBTOOL_LINK so that any
88 change in ./configure options will be accounted for.
90 kes Fix typo in the ACL patch that I overlooked.
91 kes Apply Marco's libtool include patch.
93 kes Apply Bastian Friedrich's ACL patch to eliminate ACL
94 errors during restore.
95 kes Minor cleanup of create_restore_volume_list() code.
96 kes Fix typo in console Makefile.in
98 ebl Fix #1110 about RunScript that can't execute a script with
99 Unicode caracters in the path.
101 kes Apply tray-monitor patch from Bastian Friedrich to make it
102 work with the new FD.
104 kes Apply cleanup patch from Marco
105 kes Apply patch from Marco van Wieringen <mvw@planets.elm.net>
106 that implements libtool to create shared objects out of
107 the Bacula libraries.
108 kes Fix tray-monitor so it will speak to new FD.
109 ebl Fix bug with ansi label when volume name length < 6
110 ebl Fix segfault in debug level > 50 with btape.
111 ebl Remove warning message in btape when command is empty.
112 kes Fix Win32 build to pull in new BACULA define.
114 kes Change IncludeDir to Exclude Dir Containing.
115 kes Implement code to prohibit ExcludeDirContaining in an
116 Exclude section (same for Plugin and Options). A bit
117 of a kludge with RES_ITEM2 ...
118 ebl Add field to command list to restrict Runscript console
120 ebl Use a separate JCR when running Console command with Runscript.
121 ebl Permit to mark version as Beta in some ouputs
123 kes Add plugin types in jcr.h to reduce need to cast.
124 kes Do better checking of plugin return values.
125 kes Free plugin context after calling pluginFree() as
127 kes Allow plugin to call JobMessage with NULL context.
128 kes Do not add plugin to global list if loadPlugin returns error.
129 kes Rework plugin.h a bit to reduce dependence on Bacula.
131 kes Move generation of bsr file for Virtual Backup to run section
132 so that it is generated just before actually running.
133 Suggested by Graham Keeling.
135 kes Add malloc and free Bacula entry points for plugins. Increment
136 FD plugin interface version. Create a bacula plugin context
137 structure to keep track of whether or not the plugin is disabled.
138 kes Apply FileIndex fix for plugin name stream suggested by James.
139 kes List plugins in FD status report when debug > 0.
141 ebl Add a new VerId variable that is printed in version command.
142 kes Fix migration SQL not to migrate a job that has not terminated.
143 This is a partial fix to bug #1164.
144 kes Sort JobIds returned from db_accurate_get_jobids() to fix Virtual
145 backup start time bug reported by Graham Keeling.
147 ebl Fix possible bug in cancel_job() with job that are not
150 kes Fix bat build for Win32.
152 kes Copy plugin link field into ffpkt.
154 kes Integrate patch from Kjetil Torgrim Homme <kjetilho@linpro.no>
155 It provides FileRegex in bsr files and code to collect regex
156 from the user during restore, an Allow Mixed Priorities feature,
157 and documentation for the above.
158 ebl Remove db berkeley from configure process
159 kes Do dirty check on hostname (Linux only) and if not resolvable
160 use localhost as default.
161 kes Increase vtape max block to 20GB.
163 kes Refactor restore code to create a close_previous_stream(). This
164 This may destabilize the source.
165 kes Implement planned startRestoreFile() plugin call.
166 ebl Remove missing Loaded information from status slots storage command.
167 ebl Fix Console command problem that cancels the job
168 kes Add more plugin restore debug code.
170 kes Fix plugin_bwrite - plugin-blseek mixup pointed out by James.
171 kes Rewrite plugin restore interface a bit to correspond to how Bacula
172 creates and writes to the restored file.
173 kes Add some DebugMessage() calls to the bpipe-fd.c program.
175 kes Apply Marco van Wieringen's set of patches, cleans up Migration/Copy
176 Implement 'Pool Uncopied Jobs', allow Solaris Compiler to build
177 Bat; allow add and delete in place of mark and unmark.
178 kes Another attempt to fix the endRestoreFile plugin bug noted below.
180 kes Apply dbi driver patch from Joao.
181 kes Correct a bug in passing the context to the endRestoreFile() plugin command.
182 Bastien Friedrich reported the bug.
183 kes Create plugin instance only when FD job starts.
184 kes Add new FD plugin event: bEventCancelCommand when
185 a cancel command is issued to the FD.
187 kes Add cmd_plugin flag to jcr so we can globally know if a
188 command plugin is running.
189 kes If command plugin running, do not attempt (for the moment)
190 to get Win32 extended attributes.
191 kes Ensure that proper Win32 flags are set in bfile packet
192 if plugin_bopen() works on Win32.
193 kes Remove generated src/plugins/fd/Makefile
195 kes Implement build and install of bpipe-fd.so plugin.
196 kes Rework the interface that passes packets to the plugin
197 so that the packet is started and ended by the packet size.
198 This allows the driver to do a sanity check.
200 kes Rework the pluginIO Bacula internal code to enable
201 proper handling of Win32 error codes from GetLastError.
202 kes Apply Joao's patch to regress startover_libdbi.
204 ebl Add -B option to dbcheck to get catalog information
205 kes Fix Win32 build to include new library function.
206 kes Remove some old reader/writer code.
207 kes Implement ./configure --with-plugindir=xxx
208 ebl Fix the mysql bug in the new accurate code
209 kes Improve plugin debug. Create plugin test.
210 kes Set main thread specific data to INVALID because it
211 has no jcr. This allows debug output to work correctly.
212 kes Add src/plugins/fd/Makefile to ./configure process.
213 kes Make first cut attempt to correct SQL that computes the current
214 Pool usage. This is to fix bug #1159.
215 kes Do a bunch of plugin cleanups for Win32 and more careful checking
216 of PluginDirectory and whether or not a plugin was found.
218 kes This code should fix the race condition that leads to a Director
219 crash at job end time when the job list is updated. This was reported
221 kes Add more plugin documentation and fix include of config.h for
222 Win32 build (I hope).
224 ebl Revert to htable instead of rblist
225 ebl Cleanup accurate code (remove tcdbm parts) and use red/black
226 tree instead of htable.
227 ebl Use a dedicate DB link to compute and send the accurate list
230 kes Fix compile errors in filed/fd_plugin.c.
232 kes Remove all double quotes from SQLite creating script and
233 replace by single quotes as suggested by John Huttley.
235 kes Apply dbcheck patch from Yuri Timofeev <tim4dev@gmail.com>.
236 It significantly improves the performance of dbcheck for
238 kes Fix bad debug code call in src/filed/accurate.c
240 kes Change two Jmsgs in accurate to Dmsg to reduce unnecessary
241 output. Perhaps we really need to implement M_SAVED.
243 kes Fix bug #1156 FD crash during processing of Accurate data.
244 kes Tweaks to htable code to improved debugging and make names
245 a bit more meaningful.
247 ebl Remove time_t from update_stats()
249 kes Modify the license of the example plugin program to allow
250 it to be used by anyone for making a Bacula plugin.
251 kes Make apply_rp_codes() in bpipe-fd.c be static.
253 kes Remove Encryption and Accurate lines in vbackup output -- not used.
254 kes Fix subtle bug in vbackup by not changing DEV_RECORD packet.
255 kes Add host name to items printed during dump.
256 kes Make Check File Changes default on.
258 kes Set the default FD timeout to 3 minutes (previously 30).
259 kes Apply Bastian Friedrich's weird spelling correction patch.
261 kes Always print Verify hash differences. Rename variable to make the
262 code slightly more readable.
264 kes Correct tests for MaxFullInterval as reported by
265 Ulrich Leodolter <ulrich.leodolter@obvsg.at>..
266 kes Fix MaxDiffInterval code as well.
267 kes Enable Win32 plugin load code in lib.
268 kes Make Verify code that computes disk checksums use the same
269 algorithm as backup when dealing with sparse files.
270 kes Attempt to run VSS on any systems newer than Vista -- should
271 make it work on Windows Server 2008.
272 ebl Change the new statistic implementation. Remove the UseStatistic
273 directive and add a 'update stats [days=...]' command. You can
274 now decide when copy job records from Job table to JobStat.
275 Statistics are much more accurate with this.
277 kes Fix SQL case problem that may cause the failure of DiskToCatalog
279 kes First cut adding SD plugins.
281 kes Add Slot if it is non-zero to writing bsr file after a
283 kes Change a number of bnet_fsend() into class method calls.
284 kes Begin audit of diff of 2.4 branch to trunk code.
286 ebl Fix the mysql creation script that double-created an
287 index of the same field on the Media table.
288 Add an index to on VolumeName to the Media table for mysql.
290 kes Another try at fixing Vbackup. It looks much better this time.
291 Disable file index sanity check in FD with value stored in
292 attributes record because with Vbackup the File Index gets
293 changed, but not the attributes record.
294 Enhance some debug code.
295 Fix handling of re-indexing records that are copied in Vbackup.
297 kes Made level_to_str() know about Virtual backup.
298 kes Set correct Virtual backup write pool.
299 kes Fix compile warning in new dbcheck port code.
300 kes Fix migration code broken by previous virtual backup fix.
302 kes Fix problem of Virtual backup not writing a sequential FileIndex.
303 kes Reset Virtual backup time/date to the value from the last backup.
304 kes Ensure that storage name is passed to SD on read.
305 kes Correct a problem with Level and Virtual backup, rework how
306 bsrs are printed in debug to use standard routine.
307 kes Apply patch from Chris in bug #1133 that provides alternate db port
309 ebl Remove catalog dependency from bcopy tool.
310 ebl Modify catalog scripts to have an easier packaging integration,
311 using default variables.
312 Make difference between SQLite3 and SQLite in db_get_type()
314 kes Apply most of changes in a patch from:
315 Michael Stapelberg <michael+bacula@stapelberg.de>
316 that allow the Bacula FD to compile on IRIX 6.5.
318 kes Apply patch from Bastian Friedrich that accepts a yes on a
319 delete volume command line.
320 kes Attempt to fix bug #1128 InChanger flag cleared during Migration
321 job when reading from one autochanger and writing to another.
322 kes Minor tweaks (copyright dates convert to use method instead of bnet).
324 kes Fix NULL Volume error when reading (or Migration or VBackup) must switch
325 drives when no tape is mounted.
327 kes Add additional info to some SD messages.
328 kes Add fix supplied by Martin Simmons for turning off EOL character
329 in new console multi-command code.
331 kes Fix a Verify InitCatalog problem where in certain cases
332 a garbage filename may be entered in the verification database. This
335 kes Add VSS 64 bit dll entry point in src/win32/filed/vss_generic.cpp
336 sent in by Riyas Yoosuf.
338 kes Fix seg fault in Dir during estimate command with no level value
339 given. This fixes bug #1140.
341 kes Add message to migration job when the target job is already migrated.
342 This closes bug #1129.
345 kes Raise some restore debug levels.
346 kes Replace off_t by boffset_t where ever I found it.
348 kes Define a machine dependent ioctl request type for use with
351 kes When a migration job actually runs, re-check the Job record
352 and skip if the job is already migrated. This should
353 significantly reduce the problems with bug #1129.
355 kes Set MALLOC_CHECK_=0 in environment before starting Bacula to
356 turn off glibc checks that prevent getting good dumps.
357 kes Implement console 'wait mount' command. Doesn't yet work.
358 kes Implement timeout=nn on console 'wait mount timeout=nn' command.
359 kes Break the do_swapping into do_unload, do_swapping, and
360 do_load. It is much more logical that way.
361 kes Implement a set_dcr_from_vol subroutine in acquire.c for
362 reading volumes. This allows the dcr to be refreshed after being
363 zapped when the wrong volume is mounted.
364 This should fix bug #1126 -- During multiple tape restore, bacula
365 does not ask for physical tape change, but rereads same tape
367 kes Apply patch submitted for bug #1107 with a small modification.
368 This fixes a bug where bcopy copied too many records.
369 kes Make some tweaks to bsmtp based on patch submitted in bug #1124.
370 This fixes bug #1124.
371 kes Make the default bat restore Pool be Any. This fixes bug #1118.
373 kes Remove debug statement that crashes the SD at the end of
374 a tape during restore. Fixes bug #1125.
376 kes Implement Win32 bat changes made to Branch-2.4
378 kes Tweak separator command in console to start disabled and
379 allow defining no separator character. Also make code a
380 bit more fault tolerant.
381 kes Make btraceback write the traceback to the working directory
382 before attempting to mail it.
383 kes Add a RFC to Projects.
385 kes Attempt to implement a kludge to make Qt work with bat
387 kes Setup rstorage correctly. Virtual backups are working.
389 kes Move setting JobLevel and JobType into a method, which should
390 allow completing Virtual Backups.
391 kes Fix verify jobs to work again.
393 kes Virtual Backup tweaks -- it is close to working.
395 kes Ensure that SD tried to mount a volume not in an autochanger
396 at least once before asking for operator intervention.
397 kes Make SD aware of Virtual Backup jobs.
398 kes Add VirtualFull for bat.
399 kes Changes to get read storage correct for Virtual Backup.
401 kes Remove old code from label.c
402 kes Split display_display_info() out of write_bsr_file()
403 kes do_vbackup_init() working -- i.e. bootstrap file built.
404 kes Change Bacula trademark owner from John Walker to Kern Sibbald
405 kes First non-working cut of vbackup
406 kes Correct FD heartbeat code to use volatile variable accessed by
408 kes Zero thread id with memset if on Win32 in case it is a struct.
409 kes If cannot create JobMedia record, continue to try to write eof
410 and clean up in block.c
412 kes Add code to interface OpenSSL to new Win32 pthreads code which
413 used a structure for thread_t.
415 ebl tweak bat for win32 compilation
417 ebl Remove tokyo cabinet from the source
418 ebl Update configure/autoconf to support berkeley DB
419 ebl Add a sort to db_get_file_list() to improve bsr construction time.
421 kes Add a mtx-changer.conf file that is not overwritten during
422 an upgrade. It fully configures the mtx-changer script.
423 kes Clear in-use bit on vol when unused while swapping.
425 kes Remove sleep at end of ./bacula
426 kes Clear hash packet for hardlinked files correctly. This corrects
427 a long standing bug where hardlinked files selected individually
428 would occasionally not be restored.
430 kes Apply Eric's patch to ensure that autoprune does not return
431 a Volume not in the autochanger unless requested to do so.
432 kes Correct bat restore display of multiple drives. This fixes
434 kes Do find_a_volume() each time an unload is done. This
435 fixes the failure of maxvol2-test.
437 kes Add some SD debug code.
438 kes Do find_a_volume() each time an unload is done.
439 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
440 and adds --with-db-port to ./configure.
441 kes Use Qmsg() in job.c watchdog callback.
443 kes Release main control rwlock if ABORTing.
444 kes Make watchdog connect timeout queue messages rather than sending
445 directly to avoid lock conflicts with the real thread.
446 kes Add const char in dbd.c to avoid compiler warnings.
447 kes Fix python compiler string warning. Note, IMO the GNU C++
448 compiler guys have made a *very* bad change to their compiler.
449 They now force all strings to be 'const' unless you explicitly
450 cast them, which is extremely ugly and ruins nice code as well
451 as creates a lot of useless work.
453 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
454 mt. This fixes bug #1116.
455 kes Add const in python files to reduce compiler warnings.
456 This may have to be backed out because of later compiler
458 kes Fix failure of 2drive-concurrent-test. Always read label;
459 clear_unload() only after drive is defined in acquire_for_read().
461 kes Generally clean up the manual tape loading code. The main
462 conceptual change is that when a volume is marked to be unloaded,
463 its volume name is retained, and it is only marked as unloaded
464 when either the autoloader says it is unloaded or another tape
465 is read on that drive.
467 kes Add debug code and refactor subroutine in stored/mount.c
468 kes Fix format problem in bscan output reported in bug #1105.
469 ebl Fix get_next_volume_for_append logic with autochanger
470 - use pruned volumes if found
471 - don't reset the inchanger flag after getting a recycled volume
473 Fix recycle_oldest_purged_volume to take InChanger flag in account
475 ebl Add mmap/unmmap implementation for tokyodbm under win32
477 kes Make first step toward eliminating globals from config
478 scanning. Also should be a workaround for FORTIFY_SOURCE
479 GNU C bug -- fixes bug #1042.
481 kes Apply duplicate job tests to restarted jobs.
482 kes Copy more data when restarting a job so that run
483 overrides are kept. This should fix bug #1094.
485 kes More word alignment cleanup.
486 kes Fix bug where SD did not ask operator if the device could not
487 be opened. Reported by Eric.
489 kes Add dbuser to DIR conf file (replaces user).
490 kes Add --with-db-password to ./configure
491 kes Fix regress to handle db_password.
492 ebl Add new 'status storage slots' that list autochanger
494 ebl Update vtape driver to compile only under Linux.
495 ebl Fix a bug when restoring with a wrong mediatype.
497 kes Eliminate ints from conf files and structures to avoid
498 word alignment problems
500 kes Fix bug reported by Scott Barninger where the bacula script
501 refers to scripts in the wrong directory. Needed to meet the
502 requirements of recent FHS location changes.
503 ebl Disable vtape for FreeBSD.
505 ebl Modify disk-changer to check if slot contains something before
508 ebl Fix vtape on win32 and debian.
509 ebl Fix autoselect patch (cause segfault).
511 ebl Fix autoselect option broken for a while. Fix #1089. Need some
512 work with StorageId to be able to use a particular drive in a
515 ebl Rename vtape to vtape.
516 ebl Update vtape driver.
518 ebl Modify vtape driver to avoid sparse file.
519 kes Add make clean of qt-source directory during ./configure
520 kes Store last block number written to tape in DEVICE and
521 use it for testing for correct last block on EOT.
523 Release Version 2.4.0:
527 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
528 This fixes bug #1095.
530 kes Add create_postgresql_database.sql to Win32 installer. Should
531 fix problem reported by Juilio Monteiro.
532 kes Get correct slot when auto unloading a device. This fixes bug
535 kes Fix multiple media restore.
536 kes Make DEVICE Slot private and access it via a method.
537 Allows better control over when it is set and cleared.
538 kes Fix possible seg fault if SQL error.
540 kes Add Martin's fixes to argument scanning for the estimate
541 command. This fixes bug #1093.
542 kes Add debug code to SD.
543 kes Fix renaming a Volume, which used the wrong Volume name.
545 kes If operator has rewind tape, print warning, release tape and
546 try once more. If tape is positioned somewhere, something went
547 wrong, so mark the tape in error and try once more. Previously
548 this error was fatal, now it produces an error message.
549 kes Ensure correct volume name displayed during restore
550 kes Ensure that Volume is mounted for restore.
552 kes Fix a few more Coverity reported problems.
554 kes Apply Allan Black's status dir job count patch.
555 ebl Add information about IMPORT/EXPORT slots in mtx-script.
556 kes Enhance a couple of SD debug messages.
557 kes Tweak unload flag setting and ensure it is set during swap.
559 ebl Fix #1091 about bad output in estimate command.
561 kes Modify autochanger locking to attempt to avoid race
563 kes Make sure device not busy before doing label command.
564 kes Display open() errors except when polling. Previously too
565 many were suppressed. This should fix bug #1070.
566 kes Fix Win32 reparse points. Bacula will not recurse into any
567 reparse point directory, including mount points, unless the
568 directory is explicitly mentioned at the top level (same as
569 with Unix). A file that is linked to another file will be
570 backed up -- much as Unix does for hardlinked files.
571 This fixes bug #1041.
573 kes Remove double quotes from ChangeLog and ReleaseNotes
574 kes Remove StorageId test when pruning and recycling (Eric's changes).
575 kes Remove old form of locking when getting volumes -- causes deadlock.
576 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
577 the name unique and to eliminate compile time error.
578 kes Add accurate.o to Win32 FD Makefile
580 kes Fix cats dll build on Win32 after db_update_job_end_record
581 calling sequence change.
582 ebl Switch to tokyo dbm instead of htable in accurate code
583 ebl Include tokyo dbm to bacula source tree
585 kes Fix buffer overruns detected by Coverity.
587 kes Tweak joblog display.
589 kes Implement --without-qwt
590 kes Fix layout of restore tree dialog
591 kes Add configure bat QWT libraries, so that bat can be built
592 with or without the QWT libaries.
594 ebl Add dummy tape driver for regression tests.
595 kes Make sure we unload the right slot when swapping.
597 kes Add debug times, reduce size of two-pool-changer test
599 ebl Tweak autoconf scripts for vtape
601 kes Improve SD reserve debug code.
602 kes Testing an improvement to free up volumes no longer in use.
604 kes Rework SD acquire for read to handle autochanger Volume
606 kes Implement regression that explicitly tests swapping a Volume
607 from one drive to another.
608 kes Enhance disk-changer to detect most error conditions.
609 kes Fix SD code so that it properly swaps a Volume between drives.
610 This fixes bug #1083.
612 kes Apply libdbi patch from Joao Freitas for regress and for
613 Bacula trunk. Regress now works with libdbi. Nice.
614 kes Apply .nobackup patch from bug #1077 submitted by
616 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
617 name into jobs cloned via the run directive.
619 kes Prevent a Volume that is being swapped from being freed from
620 the volume list. This will most likely fix, at least partially,
622 kes Fix strippath so that it does not get a buffer overrun and crash FD.
623 This fixes bug #1078.
624 kes Remove 50 millisec wait in SD that broke debugger.
625 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
626 that a job may run, counted from when the job was scheduled.
627 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
628 a job may block waiting for a resource, counted from when the job starts
629 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
630 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
631 that implements multiple commands per line in the console when using
632 readline. Modify the default to use a semicolon as the command separator.
634 ebl Fix SQL query in migration code.
635 ebl Make accurate mode with hash disk pass regression tests
637 ebl Implement first cut of accurate backup with hash disk.
639 kes Force unload of volume when wrong volume mounted in SD.
641 kes Fix bat seg fault at termination.
642 kes Add Bacula generated version to bat about box.
645 kes Experiment with allowing multiple read jobs.
646 kes Move final volume swapping code to DCR method and
647 call it from acquire_for_read().
648 kes When wrong volume is mounted during read, unload_autochanger.
650 kes Integrate the libdbi changes from Joao Henrique Freitas
652 kes Stop searching for Volumes in SD askdir if DIR returns the
653 same volume name twice in a row.
654 kes Close bat console windows first to eliminate error message
657 kes Tweak the swap Volume from one drive to another code so that
658 it now seems to work.
659 kes Resolve several problems with recycling that broke the new
660 code (these problems are in 2.2.9 as well).
661 kes Remove the volume lock when calling the sysop code.
662 kes Don't mark a reserved volume with no writers as unused otherwise
665 kes Rework class structures for VOLRES, DCR, and DEVICE to make
666 the method names a bit more logical, and for more logically
667 handling the responsibilities.
669 kes Remove redundant code in terminating the scheduler that just
670 causes a seg fault in many cases.
671 kes Cleanup releasing a volume and make it a DCR method.
672 kes Improve algorithm for detecting pre-reserved volume and
675 kes Tweak volume swapping code so it works.
676 kes Correct name overloading in mount.c
677 kes Replace released flag in VOLRES with reserved and add access
678 methods for the VOLRES class.
679 kes Prevent volume from being released while being swapped.
680 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
681 plugin that add %w (where) and %r (replace flag) editing to
683 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
685 kes Refactor parts of stored/mount.c
687 ebl Add sanity checks for VolWriteTime and VolReadTime
688 ebl Take care of bad clock changes while computing VolWriteTime
689 and VolReadTime. This should fix or limit #1066
690 kes Correct error string numbers in dird/catreq.c
691 kes Restructure reserving, acquiring, and mounting volumes. Calls to
692 autochanger are deferred for mount.c -- simplifes the code.
694 kes Do not prune any running job. It just fails the job.
695 kes Lock the volumes when changing dev->reserved_device and marking
696 the volume unused otherwise the device can get reserved by
697 another job before the volume is released, thus blocking it.
699 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
700 kes Fix bug #1063, reuse of freed ptr in list nextvol.
701 kes Release regex compile buffer in filed/job.c
702 kes Add proper type of const char in sql_create.c
703 kes Turn off debug in daemon termination routines
704 kes Move free_volume_list() before devices are freed in stored.c
705 kes Fix reference to uninitalized stack variables in bregex.c.
706 This should correct bug #1067.
708 kes Fix possible seg fault in SD when freeing a volume entry.
710 kes Implement unload_dev() before swap device.
711 ebl Add statistics prunning with option and menu
712 kes Separate unload_dev() from unload_other_device() in autochanger.c
714 kes Apply patch from bug #1069 that corrects spurious error messages
715 when ACLs enabled on SGI but no ACL exists.
716 ebl Fix small segfault in bacula-sd when debug level is 500
717 kes Modify run_program() and run_program_full_output() to use
718 call by reference for the results string. This corrects a long
719 standing problem where the address of the string may be changed
720 in the subroutine but not in the calling program.
722 kes Re-enable code to remember last volume mounted on a non-tape
724 kes Add patch supplied in bug #1068 that fixes a SD crash when using
725 a Virtual autochanger.
726 kes Generate correct JobMedia records during spooling/despooling when
727 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
728 <tih@hamartun.priv.no> for excellent analysis and testing.
730 kes Tweak hash algorithm for htable using Martin Simmons idea
731 for doing a circular shift.
732 kes Remember what volume is in VTLs (previously turned off for
734 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
735 pointed out some problems in creating JobMedia records during
736 spooling with concurrent jobs. Fix the problem by updating the
737 start file position before despooling and generate a jobmedia
738 record at the end of despooling.
740 kes Fix handling of JobMedia records during spooling and when a
741 Volume is changed without actually writing data to the Volume.
743 kes Rework certain SD locking based on gdb tracebacks of deadlocks
744 sent by Eric. This code now uses only the volume_lock() rather
745 than the reservations lock when at EOM and acquiring a new
747 kes Ensure only one exit point in several subroutines.
749 kes Implement bsock code to permit locking. Use the new code in Verify
750 in the FD to prevent the heartbeat thread from disrupting the Verify
751 data sent to the Dir.
752 kes Modify SD locking to eliminate locking the reservations system from
753 outside the system. Use the volume lock when getting media data
754 and reserving a new volume at end of media.
755 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
756 when SD starts are not locked into place.
758 kes Fix error compiling runscript code on 64 bit machines.
759 kes Tweak Win32 mount point code.
760 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
761 cleared giving bad file estimate).
762 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
765 kes Keep Schedule run lists in order as suggested by
768 kes Implement autostart scripts for Debian.
769 ebl Implement upgrade catalog scripts.
771 ebl Apply jobstat patch for long term statistics. Have to implement
772 purge stats command and upgrade scripts.
773 kes Fix mtx-changer.in for broken Debian mt program.
775 kes Fix large number of JobMedia records reported by Eric Bollengier.
777 kes Apply doc fix from bug #1062.
778 kes Resolve crash and improper restore wx-console Win32 restore
779 GUI. Fixes bug #1065.
780 kes Update Win32 wxWidgets to latest version.
781 kes Attempt to do correct handling of Win32 mount points. Should
783 kes Fix Win32 FD backup/restore memory leak due to improper termination
784 of BackupRead/Write. This fixes bug# 1038.
786 ebl Reduce memory usage for accurate backup, working only with ctime
787 and mtime. (not all Lstat field)
788 About 40MB for my Linux system (400.000 files)
790 kes Add dcr->reserved_volume flag that allows us to release a volume
791 even if it is not vol->released. This allows maxvol2 to work when
792 Volumes expire and we are already writing to the device (i.e. a
793 volume is pulled out from under us by another job terminating after
794 we reserve the drive).
796 ebl Permit multiple command/console per runscript definition.
797 RunScript { command = /bin/true ; command = /bin/false ... }
798 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
799 (restart an application) just after the VSS snapshot on windows.
800 kes Don't zap dcr values during release_volume() as they might
801 have the next Volume to be mounted.
802 kes Fix AIX prototype.
804 kes Second cut of drive switching during backup.
807 kes Update Win32 version of wxWidgets to most recent version.
808 kes Tweak Copy job details.
809 kes Rework dir_find_next_appendable_volume to make a bit more effort
810 to find a suitable volume before giving up.
812 kes Make ask_sysop_to_create... to return if waken from wait.
813 This helps get out of blocked conditions.
814 kes Experimental implementation of switch_device in reservations.
815 kes Implement FD version to allow easier protocol changes.
816 kes Add Plugin Options string -- not yet passed to FD.
817 kes Implement PluginOptions ACL.
819 kes Attempt to correct problems with restores with autochangers and
820 use counts going negative
821 kes Rework SD status command and implement API for bat. Implements
822 header, runing waitreservation, devices, volumes, spooling,
823 and terminated status keywords.
824 .status storage=xxx <keyword>
825 kes Clarify TLS error message by adding double quotes around name.
826 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
827 kes Pass jcr to tls routines so debug messages can be handled better.
828 kes Rework jobq resource allocation code, and possibly fix a bug
829 that caused reference counts to get out of sync.
831 kes Rename fd/dir plugin to use Bacula standard underscore.
832 kes Plugin work -- bring dir up to fd level.
833 kes Start implementation of VTL code
834 kes Fix Win32 build after adding new cats subroutine.
836 kes First cut at Duplicate Job implementation.
838 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
839 kes Start PluginOptions string, and refactor a bit of ua_run.c
840 ebl Apply Allan patch that permit to reset recyclepool.
842 kes Test patch -- possible fix or improvement for bug #1053
843 kes Refactor FD and SD status commands to permit new API code in
844 SD, and to fix Win32 build.
845 kes Win32 build is now working.
847 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
848 some ideas in patch from Scott Bailey.
849 kes Begin implementation of duplicate Job control.
850 kes Fix some of Win32 build after recent additions.
851 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
852 which causes the FD to detect whether or not the OS has the
853 honor no dump bit (*BSD systems), and if so, to skip backing up
854 any file with this bit set. The feature is enabled by setting
855 'honor no dump flag = yes' in the Options section of a FileSet.
857 kes Correct po warning message with datarootdir
858 kes Implement more code in dird.c to put configuration parsing in
859 a class rather than use globals.
860 kes Restructure SD status command for implementation of bat API
863 kes Suppress incorrect 'Will not descend from x into y' messages.
864 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
865 daemon globals used by parser.
866 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
868 kes Fix free of plugin_list when none exists.
870 ebl Apply accurate project patch.
872 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
873 on non-mempool object)
874 kes First cut of converting FD .status to work with bat API.
876 .status client=XXX header
877 .status client=XXX running
878 .status client=XXX terminated
879 kes Implement first cut of Copy Job.
880 kes Implement Catalog in Pool resource. It overrides catalog specified
881 in the Client resource.
883 kes Apply patch (with some difficulties) from Joao Henrique Freitas
884 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
886 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
887 ftruncate() actually works. In the case of some (cheap) NAS devices,
888 it does not, and so recycling NAS Volumes does not work. The code
889 simply unlink()s the file, then recreates it. This fixes bug #1011.
891 kes First incomplete cut of big malloc blocks for htable.
892 kes Tweak plugin code.
894 kes Plugin debug code + tweak a couple bat dialog layouts
896 kes Fix creating first JobMedia record during Migration to include
897 proper index. This caused slow restores of migrated jobs.
898 kes Temp fix to plugin name file_index.
899 kes Bacula backed up and restored a MySQL database.
901 kes Implement plugin restore.
902 kes Implement parsing of db_driver to give db_type index.
904 kes First cut of plugin restore code.
905 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
906 and do not strip paths on symbolic links.
907 kes Set catalog backup database and user name from values specified on
908 the ./configure line.
909 ebl Fix #1031 about wrong pool source information in job report.
912 kes Remove a redundant jcr argument to find_files, match_files, and
914 kes Implement '.status dir header|scheduled|running|terminated' that
915 prints the requested status section. With the exception of the
916 header, the other reports have fields separated by tabs (\t).
918 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
919 a resource embedded run command to find a since time if no explicit
920 since time was supplied on the command line.
921 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
922 that updates the state file at job termination time in addition to
923 when the daemon terminates.
925 kes First version where a plugin did a backup.
926 bpipe-fd.so created a backup file, wrote a test
927 string to it, and Bacua could restore this fabricated file.
929 kes Implement DB Driver = string for the DBI driver.
930 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
931 kes First cut of code for loading Win32 plugin dlls. Implement
932 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
933 and implement a dlfcn.h file based on opengroup's definitions of
936 kes First cut plugin directives.
938 kes Apply patch from bug #1049 to prevent stripping the path on a
940 kes Attempt to fix bug #1047 where stripping a path corrupts the
941 heap. Waiting for feedback.
942 kes Correct the Mount message not to suggest labeling a new tape
943 when doing a restore. Submitted by email by John Stoffel.
944 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
945 FD by using casting. Reported in bug #1042.
947 kes A bit of crypto cleanup. More later.
949 Release Version 2.2.8
951 kes Apply patch from Martin to correct bug #1040, bscan sets existing
953 kes Fixed important spelling error in doc -- bug #1045.
955 ebl Fix bextract to be able to extract non-portable Win32 data to
957 kes Move initialization of read/write res lock earlier in the code.
958 This fixes the crash with a null conf file. This fixes bug
960 kes Redefine CURES in lib/parse_conf to be URES and move it all
961 into lib/parse_conf.c -- this responds to bug #1042, but does
962 not fix it. The fix is not to compile with FORTIFY_SOURCE.
963 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
964 the trunk SVN. I don't think this was reported as a bug.
966 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
968 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
970 kes Add DataDespooling and DataCommitting status (committing is
971 the last despooling).
972 kes Finish implementation of new reservations code noted below.
974 kes Fix bsnprintf for float point numbers. I broke recently when
975 parameterizing some variables. This fixes bug #1036.
976 kes Undo recent reservations changes ... will apply them later
977 when they work better.
979 ebl Fixes #1034 which cause mysql to hang the connection after 8h
980 ebl Change default statistics target of filename.name and path.path
981 fields for PostgreSQL. This speeds lookup by indexes. Thanks
983 kes A few more tweaks to new reservation code. Make sure to clear
984 vol released flag when retaking volume. When reading label and
985 label is bad mark volume unused. When recycling, mark volume
986 unused so it can be renamed.
988 kes Fix reserve_volume() so it doesn't release a volume in use
989 (i.e. a volume entry not marked released). This should be
990 the last part needed to fix bug #1018.
992 kes Move Heartbeat documentation from Job to Director resource.
993 This fixes bug #1033.
995 kes Fix existing switch drive SD code to call autochanger to release
996 any old volume. This must be done to keep the autochanger from
997 releasing subsequently newly reserved volumes in doing a close().
998 This should fix bug #1018.
999 kes Fail if attempting to get console input in batch mode. This
1000 should help fail RunScript console commands that are incomplete.
1001 kes First cut implementing switch_drive() in SD (not actually called).
1003 kes Implement first cut running console commands in a RunScript.
1005 ebl Fixes bug #1028 where 'Selection Type' option was not usable
1007 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
1010 Release Version 2.2.7
1012 kes Add new free_tls() entry point so that Win32 builds.
1013 kes Fix compile warning in src/lib/util.c
1014 kes Fix entry point for edit_job_codes() so that Win32 builds.
1015 kes Fix seg fault Frank Sweetser reports in regression testing
1016 on his systems. The problem was that the original author of
1017 bsnprintf.c did not take into account the side effects of
1018 using ++x in the argument to a #define.
1019 kes Make SD protocol backward compatible with version 2.2.x.
1021 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
1022 because Bacula no longer restores sockets.
1023 ebl Always use ignorecase fileset option on win32 FD.
1025 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
1026 that implements double quoting include names in conf files,
1027 and also allows piping input by having the first character
1028 be a vertical bar (|).
1029 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
1030 that implement %f in RunScripts to pass the FileSet name.
1031 kes Skip leading | when lex input comes from a pipe as suggested
1032 by Michael Stapelberg <michael@stapelberg.de>.
1034 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
1035 Nerijus Baliunas <nerijus@users.sourceforge.net>
1037 kes Implement Plugin Directory and plugin events.
1039 kes Implement a security enhancement: TLS authentication but no
1040 encryption. Enabled by setting 'TLS Authentication = yes'.
1041 Note when this is on, TLS encryption is turned OFF!
1043 kes This patch corrects a problem where the maximum concurrent storage
1044 jobs counter gets out of sync during restore jobs causing jobs to
1045 'wait on max Storage jobs'. This patch fixes bug #1009.
1047 kes This patch fixes bcopy so that it produces correct Volumes.
1049 kes This patch eliminates spurious output to the console during a VerifyVolume
1050 job that contains encrypted data. It fixes bug #1024.
1052 kes This patch prevents the 'status dir' command from trying to use a scratch
1053 volume and possibly moving it from one pool to another. This patch fixes
1056 kes Add new include to postgresql.c suggested by Marc Cousins so
1057 that it compiles correctly with pgre version 8.3.
1059 kes Fix --archivedir addition to configure. Replace it with
1060 --with-archivedir in configure.in This fixes the regression
1062 kes This patch fixes bug #1012 where the job is canceled because
1063 of Max Run Time exceeded when the job has not yet started.
1065 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
1066 one 'part' to write. Instead of each part being stored on disk,
1067 written to DVD, then deleted from disk, all parts are written to disk,
1068 and only the last is written and deleted from disk.
1069 kes This patch fixes the status command to include the formating string for
1070 JS_AttrInsterting. It fixes bug #1021.
1071 kes This patch should fix the Mac OS X build problem on the latest
1072 Darwin, where sys/types.h was not included correctly (apparently
1073 due to a change in the Mac headers). The solution was to explicitly
1074 ensure that it is defined for the ./configure.
1075 This patch also has a rebuild of configure that includes the Debian
1076 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
1077 kes This patch should ensure that queued messages to the console are
1078 displayed as soon as possible. It should fix bug 1007, but has been
1079 reported not to work.
1081 kes This patch fixes the infinite loop when trying to increase the
1082 maximum number of volumes in a Pool during the add command.
1083 This patch fixes bug #1008.
1085 Release Version 2.2.6
1087 db Remove extra data on estimate command in joblist for bat.
1089 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
1090 really change anything, but is the beginning of doing it *right*.
1091 To do it completely right the LastWritten date must be passed to
1092 the SD, but it is not yet done.
1093 kes Minor tweaks to some bat restore SQL.
1094 kes This patch fixes bug #1003 where putting the message output from
1095 a Verify job into the catalog results in a recursive loop. The problem
1096 seems to show up only with postgresql (to be verified).
1097 kes Correct %x to %p in postgresql debug statement.
1099 kes Fix bug #942 where lots of emails where generated when the heartbeat
1100 interval was low and Bacula wanted a different tape from the one in
1103 ebl Add new SD despooling attributes and Dir inserting attributes
1104 job status codes in the catalog (Status table).
1106 ebl Use qmake-qt4 instead of qmake when available (debian system).
1108 kes Add a security warning to src/cats/make_catalog_backup.in indicating
1109 that passing the password via the command line (arg 3) is insecure.
1110 This responds to bug #990 (it doesn't fix it).
1112 kes Set default debug_level to zero. This corrects bugs #991 and #993.
1113 kes Fix a crash in bat when it cannot connect to the Director for example
1114 if the Director is not running.
1115 kes Remove redundant INDEX (JobId) from File table in the trunk.
1116 This fixes bug #992.
1117 kes Make explicit exception to GPL in LICENSE to permit linking
1118 the Win32 FD with Microsoft VSS code.
1119 kes Apply the Solaris package patch from
1120 Masopust, Christian <christian.masopust@siemens.com>
1121 kes Apply the patch to optionally add a timestamp in the debug output
1122 submitted by Mariusz Czulada <manieq@wp.eu>.
1124 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
1125 backend (sql_strerror). Fixes bug #989
1127 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
1128 It applied with no problems.
1129 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
1130 awk are on the path.
1131 kes Redirect stderror to stdin on mt status command in mtx-changer.in
1132 since the status is returned on stderr on Solaris.
1133 kes Activate Close button on tray-monitor window. This fixes
1135 kes Check for NULL item in parse_conf.c before calling it. In the
1136 case of Device, there is no item and this caused a seg fault when
1137 Device appears in the conf file.
1138 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
1139 avoids pulling in config.h multiple times in some new code.
1141 kes Fix spurious warning message printed when creating a volume with
1142 a LabelFormat. This fixes bug #976.
1144 Release Version 2.2.5
1146 kes Add JobId in place of Job name in all the Jmsg() output.
1147 kes Correct the APP_DESC for the Win32 storage service (remove an e).
1149 kes Make maxvol-test and new more strict maxvol2-test work.
1150 kes Print JobId in all Jmsg() job output.
1152 kes Add new SD despooling attributes and Dir inserting attributes
1153 job status codes. This fixes bug 961.
1154 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
1156 kes Fix doc issue. This fixes bug #963.
1157 kes Fix listing performance problems in bat. Pointed out by
1159 kes Remove old debug code.
1160 kes Fix bat code that tests for Win32. This should fix bug #968
1161 kes Query 5 list wrong Vol after migration. This fixes bug #960
1163 ebl Fix #969 where user can't change Replace option in restore menu.
1165 kes Save jcr in thread specific data (tsd) for each thread.
1166 kes Make Dmsg() print JobId as -%u.
1167 kes Make Jmsg, Emsg, and others automatically pickup the jobid
1168 for the thread if it exists.
1169 kes Remove old reservation debug jid code.
1170 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
1171 ebl Add an option that permit to specify spool size in job
1172 definition. (Applying patches/testing/spoolsize_per_job.patch).
1173 You must upgrade SD and DIR at the same time.
1174 dvl Add new configuration item --archivedir
1175 dvl Adjust regression tests to use tmp not /tmp. This will allow
1176 multiple concurrent runs of the regression tests.
1178 kes Fix race condition that drops final block written to volume.
1179 This happens in rare cases with multiple simultaneous jobs
1180 when the Volume fills. This fixes bug #964. May be related
1181 to bug #935 and possibly #903.
1182 kes Eliminate more strerror() and replace with bstrerror().
1183 kes Remove BSD getopt and replace with unrestricted IBM version.
1184 kes Fix Win32 build for changed calling sequences.
1185 kes More tweaks to the mount volume routines to get everything
1186 right. Changed variable name from find to have_vol, which is
1187 much easier to understand.
1188 kes Enhance btimer debug code.
1190 kes Fix FD->SD authorization failure, which was due to spurious
1191 wakeups from a pthread_cond_timedwait(). Simply check the
1192 predicate before continuing. This fixes bug #953.
1193 kes Add const char where needed (more to do). Remove temp debug code.
1195 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
1196 kes Don't overwrite error message in check_tables_version.
1198 kes Unlock batch insert tables with same calls used elsewhere.
1199 kes Allow starting 59 jobs a second.
1200 kes Make SD session key more random.
1201 kes Add retry for SQLite opening db if it fails. Probably helps
1203 kes Suppress extra error messages during batch insert failure.
1205 kes Add jcr to timer packets so if killed message can be sent to job.
1206 kes Add JobId to all Dmsg() output.
1207 kes Put some FD auth code on dbglvl rather than fixed.
1208 kes Return insert attributes error message in db msg buffer to avoid
1209 false error messages. Helps fix bug #966.
1210 kes Separate batch init error messages. Probably helps fix bug #966.
1211 kes Make SD code that contructs attribute insert check string lengths
1213 kes If Dir gets an error during inserting attributes, cancel SD.
1214 This reduces unnecessary error messages.
1216 kes Correct search boolean for getting Volume info
1217 ebl Cleanup batch insert code. Probably fixes bug #965.
1218 kes Back out one small change to the reservation system (reserving a volume).
1219 kes Rework how a Volume is mounted. It is now much more intelligent and
1220 will always attempt to use any mounted volume if possible and reduces
1221 calls to the Director asking about volumes.
1223 kes Turn off some code when batch insert not enabled.
1224 kes Edit FD name in connect error messages.
1225 kes Rework the reservation system to take into account that the Director
1226 might give us a Volume that is different from the current one being
1227 used, and to ensure that we don't exceed Maximum Volume Jobs.
1228 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
1229 fatal error with multiple jobs running'
1230 kes Add more debug code in reservation system.
1231 kes Implement maxvol-test to check bug #947.
1233 kes Add code to handle tray monitor separated from Win32 FD.
1234 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
1236 kes Add missed return in fixing verify bug -- trunk only.
1237 ebl Fix a command parser issue causing a director segfault.
1238 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
1239 This fixes bug #954.
1240 kes Increase the max block size to 4MB fixes bug #957.
1241 kes ERABT if user sets min block size > max block size. Fixes bug #956.
1242 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
1243 is not properly mounted (recognized) during a poll.
1244 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
1245 Job that has differences reports Verify OK.
1246 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
1248 ebl Add an option to operate on all pools with update vol parameters.
1249 This complete the project 20. Patch from Nigel Stepp.
1250 ebl Add history support to bconsole when using readline.
1251 Using Ctrl-D to exit doesn't update .bconsole_history
1252 kes Modify new volume algorithm to use max MediaId for generating next
1253 volume number rather than the count of Volumes. This should essentially
1254 eliminate the failure rate if some volumes were deleted. Bug #921.
1255 kes Begin implemention of Optimize Job Scheduling.
1256 kes Implement restore callback that Dirk and I agreed on for bat
1257 restore. This fixes bug #928. Restore of backup of zero files fails.
1258 kes Fix SQL Catalog logging which broke with new db_escape_string
1261 Release Version 2.2.4
1263 kes Fix bacula_cats.def for new db_escape_string().
1264 kes Increase size of name string when FD making connection to SD.
1265 May fix bug #953. FD->SD connection failure.
1267 kes Add code to help Dan debug 2drive-incremental-2disk test.
1268 kes Add code to try to fix bug #908.
1269 kes Add waits to multiple exit detection code to try to force pid
1270 file to always be deleted.
1271 kes Restore good dev.tar.gz to rescue set appropriate binary property.
1272 This fixes bug #950.
1273 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
1274 trying to switch drives by checking for blocking before unblocking.
1276 kes Cancel storage daemon in all cases where FD reports error. This
1277 should fix virtually all cases of bug #920.
1278 kes Fix db_escape_string() for MySQL which did not compile.
1280 kes Fix error message that was clobbered when Dir tells SD it does not
1281 have write permission on Volume. This should fix a minor point
1282 in bug #942, but not the main problem.
1283 kes Add code to cancel job in SD if FD connection fails. This should
1285 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
1286 dvl Pass jcr and db into db_escape_string() to enable better escaping
1288 kes Fix migration code to get correct Volume name with multiple volumes
1289 by skipping |. Fixes bug #936.
1290 kes Implement patch supplied by Landon to fix bug #944 where using
1291 TLS with bconsole uses 99+% of the CPU.
1292 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
1294 kes Move patches into patches directory.
1296 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
1299 ebl Using 'm' in bconsole will show messages like before,
1300 and not memory usage.
1301 kes Fix bug #935, and probably also bug #903 where files were not
1302 restored. MediaId was not properly set in JobMedia record after
1305 kes Suppress chown and chmod error messages if the FD is not running
1308 kes Apply Martin Simmons' patch that should turn off the new API usage
1309 when batch insert is turned off allowing building on older
1311 kes Add ./configure search in qwt-qt4 for qwt package
1313 kes Bacula is now free of 3rd party GPL copyrighted code!
1314 kes Remove idcache.c
1315 kes Add guid_to_name.c/h which replace idcache.
1316 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
1318 ebl Detect if new PosgreSQL batch insert API is present.
1319 kes Correct incorrect mempool call causing Director crash. Occurs on
1320 systems without va_copy().
1321 sb Update spec files for 2.2.1 release
1323 kes Fix memory pool call in ua_output.c. bug #934.
1324 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
1325 Add test program to fnmatch.c
1327 kes Integrate patch to README.vc8 from
1328 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
1329 edit it to get it into Unix patch format.
1330 kes Implement mkpath.c to replace old FSF makepath.c
1332 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
1334 Release Version 2.2.1
1336 kes Update POTFILES.in
1337 kes Cleanup a few underquoted AC_DEFUNs in configure
1338 kes Apply patch from Martin Simmons that adds a test for va_copy to
1341 kes Fix bug #921 by increasing the number of tries to create a new volume
1343 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
1344 can be called multiple times. Implement a version for machines
1345 without va_copy() that gets a big buffer.
1347 kes Integrate more portable zone offset code into bsmtp.c
1348 Submitted by Attila Fülöp.
1350 kes Fix bad SD->FD return status reported by
1351 (James Harper) <james.harper@bendigoit.com.au>
1352 ebl Fix a bug in read_close_session which return random status
1353 thanks to James Harper
1355 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1356 and directory names during restore of single file/directories.
1357 kes Add sanity checks to .sql command when string is empty. Hopefully
1358 that will resolve Dirks Director crash.
1360 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1361 in the bsmtp chat subroutine when debug is >= 10.
1363 kes Fix Director crash when running bat SQL queries.
1364 kes Add David's notes on Item 8: Copy pools.
1366 kes Rework projects file to be current and ready for a vote.
1367 kes Enhance lex scanner error message.
1369 kes Tweak LICENSE file to mention BSD code.
1370 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1371 if specified on the ./configure.
1372 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1373 This class is intended to allow us to open a second bsock to the
1374 Director while in the restore subdialog.
1376 kes Fix configure to create bat Makefile before creating dependencies.
1377 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1378 kes Add a tooltip to the tray monitor.
1379 dvl Set the Director's PID file before dropping privs. This fixes
1382 kes Update AUTHORs file
1383 kes Increase the default max concurrent jobs to 20 in FD and SD to
1384 correspond with the default .conf files.
1385 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1386 some different, of the same file created by RN when porting the
1388 kes Rearrange some of the Win32 directories and the placement of the files
1390 kes Set DEVELOPER flag in version.h
1392 ========================================================================
1393 Release Version 2.2.0
1395 kes Apply a second doc patch from Marc.
1396 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1397 improves the tips section that discusses how to setup multiple
1400 kes Update bat README file.
1401 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1402 corrects a typo in the Recycle status check in db_find_next_volume().
1403 This will probably fix a number of annoying problems with multiple
1405 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1406 bnet calls -- no functionality change.
1408 kes Modify the Verify output to specify if files are missing on
1409 the Volume(s) or disk. Fixes confusion in bug #916.
1410 kes When more than one Volume is read in a migration job, the last
1411 Volume bytes reported are from the last read volume rather than
1412 the last written volume. Fixed. This fixes bug #910.
1413 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1414 It previously printed New Recyle flag is: no. This fixes bug
1417 kes Correct seg fault when switching tape drives during restore.
1418 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1419 be used until after 2.2.0 release.
1421 kes Remove fnmatch() in SD that permitted wild card specifications.
1422 This fixes bug #914.
1424 kes Fix %g in filename returned by SQL for browse tree reported by
1426 kes Fix configure so that it puts config.out in the cwd rather than
1428 kes Attempt to fix the locking problem reported by Eric in bug #906.
1429 kes Make berrno class to leave errno unchanged after constructor call.
1430 kes Make bnet_server use the heap rather than the stack to allocate
1431 its socket fd pointers to avoid a crash at termination. Problem
1432 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1434 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1435 and putting it in depkgs-qt along with Qt4.3.
1437 kes Rework code in acquire.c that switches drives for reading when
1438 the Media Type does not match. This should fix bug #906
1440 ebl Fix a director segfault during job setup #907
1441 kes Correct seg fault in postgresql when first operation returns no
1442 rows. Fixes Dirks File browser problem seg fault with bat.
1444 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1445 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1448 kes Implement PopUp YES/NO dialog for bat.
1450 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1452 kes Correct RunScript to terminate job in FD on failure.
1453 kes Change abort_on_error and AbortJobOnError to fail_on_error
1454 and FailJobOnError in RunScripts.
1455 kes Minor tweaks of code formating in RunScripts, principally to
1456 avoid depassing 80 columns.
1458 kes Eliminate one #ifdef Win32 in bsmtp
1459 kes Implement grow tool to grow a file for testing very large databases.
1460 kes Add big-vol-test to test Bacula seeking with > 5GB.
1463 kes Modify find_next_volume() to return all values in Media record.
1464 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1468 kes Update Release notes
1470 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1471 Warning, in previous beta version, all media get from scratch keep their
1474 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1475 This should fix bug #842. Made a note to look at removing the temp
1476 files at the end of the install.
1477 kes Add ability to mount and unmount a file device providing it is
1478 marked as being removable and has the appropriate mount and unmount
1479 commands defined in the Device resource. This fixes bug #830.
1480 kes When applying a storage override, release all previous storage
1481 definitions rather than just prepending the new storage.
1482 This should prevent a good deal of confusion.
1484 kes Implement ./configure search for qwt libraries.
1486 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1487 Win32 FD. This should fix bug #893.
1488 kes Remove an unnecessary beep in Win32 init code.
1489 kes Update copyright dates in Win32 executable about boxes.
1490 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1491 code with a BSD getopt.c and getopt.h.
1492 kes Remove sched.h from the Win32 compat directory -- not used.
1493 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1494 need to shut it down, do it through the services panel or the command
1496 kes Remove some inappropriate Bacula FSFE copyrights.
1497 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1498 kes Fix regress config non-portable test as pointed out by
1499 Florian Heigl <florian.heigl@gmail.com>
1500 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1501 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1503 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1504 Reported by Frank Sweetser.
1508 kes Fix client-only build.
1509 kes Integrate client-only fixes for bsys (initgroups) and conio from
1510 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1511 kes Make arguments to get_scratch_volume() in same order as other
1513 kes Rework the prune_volumes() subroutine so that after purging and
1514 no volume found in desired pool, it will check for a scratch
1515 volume. This prevents recycling the whole scratch pool.
1516 kes Add code to status storage to print boffset_t (largefile support).
1518 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1519 kes You now need a --with-qwt=<dir> to be able to build bat.
1520 kes Update src/win32/cats/bacula_cats.def to include the new
1521 db_get_query_dbids() call on Win32.
1523 kes Correct a problem when selecting a scratch volume and moving
1524 it to another pool that lost some columns.
1525 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1526 kes Enhance Autochanger error messages to include Volume and device name.
1527 kes Rework prune_volumes() code to take account of InChanger flag,
1528 and to handle recycling volumes going to the Scratch pool and
1529 current pool because the RecyclePool directive.
1530 kes Implement a better and more efficient db_get_query_dbids() to
1531 handle creating and passing back a list of DBIds.
1535 kes Start work on new more efficient DBId subroutine. First use
1536 will be for recycling volume to Scratch inchanger.
1537 kes Increase number of JobIds in pruning from 1000 to 10000.
1538 This to be replaced by above routine.
1539 kes Begin implementation of building Qt4 on Win32.
1540 kes Correct typo in fix I added for bad TLS shutdown.
1541 kes Pull 2.0.3 patches into patches directory.
1542 kes Update Release notes. Include qt-console in line count.
1543 kes Update Projects file.
1545 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1546 bug in migration code where a job that spanned two volumes
1549 kes Implement new BST_DESPOOLING blocked state. Change from locking
1550 during despooling in SD to blocking. This means that other threads
1551 can work with the device structure, in particular the reservations
1552 system while despooling.
1554 kes Fix return in reservation message queue that missed clearing
1555 the jcr lock (implemented 26Jun07 below).
1556 kes Rename a number of dev methods to make locking function names
1558 kes Document locking in lock.c. Move lock structures to new file
1561 kes Move reservations message lock to lock jcr only this
1563 kes Move main SD locking code into lock.c (new file).
1564 kes Update Win32 build to include lock.c
1568 kes Dirk committed the qwt library code for drawing graphs in bat.
1569 kes Tweak install of qwt so that it is integrated with ./configure.
1571 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1572 out by Eric (my typo).
1573 ebl Fix configure.in to get batch mode enable
1574 kes Return correct string from authenticate.cpp in bat when connecting
1576 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1577 spurious line drops when using TLS.
1578 kes Do not file reparse points when restoring a file that already
1581 kes Implement Windows reparse points -- similar to directories, but
1582 we do not descend into it. This is a first cut. They seem to
1583 be backed up, but restore is not yet tested.
1584 kes Remove restore_blocking in tls code when shutting a socket to leave
1585 it in blocking mode. Hopefully this will fix the encryption bug
1586 reported by Frank Sweetser.
1587 kes When opening a file for backup, tell the OS that we are going to
1588 read it sequentially -- optimization.
1589 kes Change variable names in authenticate_director() to not conflict
1590 with member names in bat. Caused great confusion with compiler,
1593 kes Queue openssl error messages in case of comm problem.
1594 kes Do shutdown() call if socket terminated.
1595 kes Remove some duplicated code in tls.c
1596 kes Move more of the bsock member variables into private and access
1598 kes Add Frank Sweetser's tls-test to the regression suite.
1600 kes Add Swedish sv.po file
1602 kes Don't print clock skew message in FD if less than 3 seconds diff.
1603 kes Add a bit of VSS info to status client.
1604 kes Implement a first cut of Vista VSS, using Win2003 code.
1606 Release: 2.1.20 beta
1608 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1609 loaded tape but uses first drive).
1610 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1611 This was indeed a Win32 issue.
1613 kes Simplify search of autochanger for in-use Volume.
1614 kes Fix exit condition of check for in-use volume. kes Remove
1615 inappropriate my_postgresql_free_result() in db_close()
1617 kes Fix bad return in FD when encryption signature not found.
1618 Probably caused a crash.
1619 kes Inhibit missing encryption signature error messages for
1620 file types where no signature computed.
1621 kes Correct inverted check on autochanger in reservation system.
1622 kes Tweak debug code in autochanger reservation.
1624 kes Add some additional locking in the cats directory in subroutines
1625 that modify packet variables called from batch insert.
1626 kes Rework how dcrs are allocated. new_dcr() can now be called
1627 with an existing pointer, and it will simply clean it up.
1628 This allows the reservation system to test various different
1629 devices, and will permit easy device changes.
1630 kes A bunch of changes all over to handle new new_dcr() calling
1632 kes Work more on the Volume management in the SD. Remember Volumes
1633 for tape drives and for autochangers (even virtual disk changers).
1634 kes When looking at the Volume list to reserve a drive, handle
1635 autochanger names correctly by interating through the changer
1636 devices. Also call the Director to see if a Volume is suitable
1637 for the current job.
1638 kes Fix some bugs in bscan. Make sure all media records are written.
1639 Make sure that valid JobMedia records are written for disk files.
1640 Previously they were completely wrong.
1641 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1642 that the URLs don't change and so that the developers will all
1643 work off the same copy. Rebuild from scrach.
1644 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1646 Release: 2.1.18 beta
1648 kes Fix seg fault in FD from incorrect digest size.
1649 kes Fix argument to non-OpenSSL crypto.c subroutine.
1651 Release: 2.1.16 beta
1653 kes Remove a few malloc()s from the encryption code.
1654 kes Use the class calls to bsock in filed/backup.c and restore.c in
1655 place of the old bnet_xxx code.
1656 kes Implement code that does an on the fly calculation of the
1657 signing digest during restore of encrypted files. It makes
1658 a best guess at the algorithm, and if it is not correct, will
1659 then revert to the old code which reads the file after it is
1661 kes Implement at least one missing crypto stream in stream_to_ascii()
1662 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1663 #877 where a reload with bad syntax causes Dir to exit.
1665 Cut: 2.1.14 beta (not released)
1667 kes Do not free a volume on a tape drive until another volume is
1668 mounted and read, or the autochanger unloads the volume.
1669 This should help the SD re-use volumes that are already mounted,
1670 and should fix bug #886.
1671 kes Apply patch from user brettedgar that allows gnome2-console include
1672 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1673 kes Apply patch from Lucien Weller that fixes day of week calculation
1674 because of DST flag problem. Fixes bug #887.
1676 kes Move find_next_appendable_volume() to after acquiring a valid device
1677 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1679 kes Unable to reproduce bug 872. However added additional testing for
1681 kes Bug #874 resolved by documenting SQLite limitations.
1682 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1683 kes Bug #881 resolved by removing typo in mtx-changer script.
1684 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1685 approval. Added a link to the wiki on the web page, and implemented
1686 a backup from http://paramount.ind.wpi.edu
1688 kes Fix update allfrompool to pass pool name.
1690 kes Convert to pure GPL v2 license.
1691 kes Fix sscanf problems reported by Peter Buschman that caused
1692 a bus error on Solaris.
1693 kes Rework (simplify) the select prompt in bat.
1694 kes Move get_jobid_from_tid() into lib and create a
1696 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1697 should definitely fix the problem of lost error messages in the
1699 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1700 kes Eliminate tcpd.h from the project. Enclose the #include from the
1701 library with extern C ...
1702 kes Add print of signal name when a signal is trapped.
1704 Release: 2.1.12 beta
1706 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1708 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1709 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1710 makes SQLit3 run 30 times faster, though a bit less safe.
1711 kes Implement --with-batch-insert in configure and detection of thread
1712 safe libraries. It is on by default, but turned off if no thread
1713 safe library (e.g. SQLite 2) is available.
1715 kes Fix Bacula PostgreSQL buffer overruns.
1716 kes Do better checking for NULL results returned from PostgreSQL;
1717 implement retry for failed queries; clear results buffer after
1718 failed query. Hopefully this will correct the PostgreSQL failures.
1720 kes Implement algorithm to handle only one appendable volume with
1721 Prefer Mounted Volumes = no.
1722 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1723 returned from a query.
1724 kes Make volume lock recursive.
1725 kes Implement an additional volume reservation algorithm that
1726 starts by considering all reserved volumes then uses the
1727 old brute force algorithm of searching the resources to
1728 find a suitable device.
1729 kes Add new reservations debug code and refine the old code.
1730 kes Update the win32/dll/bacula.defs file.
1732 kes Tweak reservations algorithm to permit a few more cases, i.e.
1733 volume reserved, but on different drive, ...
1734 kes Enhance SD status to include Pool and Media Type for drive in a
1735 more readable format (a bit longer).
1736 kes Fix PostgreSQL double free.
1738 kes Minor refactoring of restore decryption code.
1739 kes Add code to smartall.c to detect double free of a buffer.
1741 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1742 so that bsmtp will create a correct email address (mailbox only).
1743 kes Modify 'memory' command so that the buffers are listed as 'In use'
1744 to avoid confusion with Orphaned buffers.
1745 kes I reworked the OpenSSL include/lib flags to be handled in
1746 the standard Bacula way, which should fix bug #863 concerning
1747 non-standard OpenSSL libraries.
1749 kes Implement Help Browser window for bat.
1750 kes Fix reload bug that reset StorageId to zero.
1752 kes Fix TLS #ifdefing when TLS turned off.
1753 kes Ensure that when labelling a tape with Slot=0 that InChanger
1755 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1757 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1758 add DISTINCT (required by PostgreSQL).
1759 kes Implement BSOCK authenticate_director() method. Eventually will
1760 authenicate all daemons.
1761 kes Move several more functions into the BSOCK class.
1763 kes Add code to tell the OS that we no longer need a cached
1764 file that we were reading. In findlib/bfile.c. Also,
1765 only cache files that we are reading. Thanks to
1766 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1767 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1768 kes Implement script to automatically generate cats and dll .def
1769 files for Win32 dll.
1770 kes Update README.mingw32 to include new .def file generation.
1771 kes Correct typo in UTF-8 error message as reported by:
1772 jhernandez <julianhernandez@gmail.com>
1773 kes Add additional sm_check() code on debug level 1.
1774 kes Set default debug level to 1.
1775 kes Trap SIGABRT in attempt to get traceback.
1777 kes Reduce bat connect timeout from 30 to 15 seconds.
1778 kes More restructuring and implementing BSOCK class in place of
1780 kes Remove a few unnecessary malloc() tests in crypto code.
1781 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1782 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1783 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1785 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1787 kes Fix Verify InitCatalog. The attributes were not pointing to the
1788 correct saved location.
1789 kes Implement message callback so that GUI is sure to get all
1790 daemon messages. Currently displayed in a dialog in bat.
1791 kes Ignore SIGUSR2 (Bacula timer) in bat.
1792 kes Apply regress patch from bug #859 to allow regress to work
1793 with Solaris compiler.
1795 kes Begin adding TLS support to bat.
1796 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1797 clean up lex.c and make it more readable.
1799 kes Move more bnet functions into the BSOCK class.
1800 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1801 kes Complete change of berrno strerror() method to bstrerror()
1803 Release: 2.1.10 beta
1805 kes Cleanup incorrect email addresses in bsmtp.
1806 kes Make bat display initial messages rather than discard them.
1808 kes First cut of adding .mod to the run command.
1809 kes Implement auto display of messages in bat.
1810 kes Enhanced preferences to allow all Bacula output to be
1813 kes Try to make bsmtp date routines more generic.
1814 kes Fixed bug #856 autochanger documentation.
1815 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1816 kes Add new cats entry point so Win32 builds.
1818 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1820 kes Do better checking for the MySQL 64 bit libraries looking for both
1821 .a and .so libraries.
1822 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1823 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1824 kes Require the thread safe version of MySQL during configure. Thanks
1825 to Andre Noll for pointing this out.
1826 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1827 continuing in migration code.
1828 kes Apply implementation of tray-monitor font derived from gnome-console
1829 submitted by Andreas Piesk <a.piesk@gmx.net>
1831 kes Eliminate important memory loss in SQLite
1832 kes Fixed the batch insert MySQL thread specific data that was not
1833 being freed. See cats/mysql.c:db_thread_cleanup().
1834 kes Fix restore before command.
1835 kes Convert old hdr.name to name() in a few places.
1836 kes Implement update jobid command.
1837 kes Return all time_t dates in db_get_job_record()
1838 kes Stop watchdog in SD earlier.
1839 kes Put Pool just after Storage in please mount message.
1840 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1843 kes Update the po files.
1844 kes Fix Verify InitCatalog by making it cache attributes.
1846 kes Change name bacula-bat to bat for man 1 page to correspond to
1848 kes Check for client and store NULL pointers in status command. This
1850 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1851 kes Fix sign extended editing of %p.
1852 kes Clean out a little old #ifdefing in cats/mysql.c
1854 kes If time diff between DIR and FD is more than 600 seconds convert
1855 INFO message to WARNING.
1856 kes Implement heap size display in status for all daemons.
1857 kes Attempt to fix MySQL db open memory loss (not successfull).
1858 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1859 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1860 Query. This looks like a MySQL but but by doing extra releases,
1861 the memory goes away. This should fix bug #847.
1863 kes When backup fails, cancel SD before waiting for sd termination.
1864 kes If SD is waiting for FD to connect during cancel, wake up the
1866 kes Fix fsf code so that errno is correctly reported.
1867 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1869 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1870 so that Bacula doesn't later stumble into a seg fault.
1871 kes Use the term Restore Client in the restore Job report.
1872 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1873 the original job's FileSetId.
1874 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1875 spooling in migration jobs. Not yet tested.
1876 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1877 reading conf file from a pipe. However, do it with open_bpipe()
1878 rather than popen. Not yet tested.
1880 kes Fix an ugly bug where the VolCatBytes were getting updated
1882 kes Implement bconsole memory command that prints current memory
1883 usage, plus smartalloc dump.
1884 kes Clarify some error messages in backup, admin, and migrate.
1885 kes Shrink label dialog to smaller size.
1886 kes Invert Cancel OK buttons on restore to be OK Cancel.
1887 kes More strerror() to bstrerror() conversions.
1889 kes Start implementing bstrerror() in place of strerror().
1890 kes Stripping path -- seems to work.
1892 kes Prevent door and port files from being restored (mostly
1894 kes Free an unreleased buffer in compat code.
1895 kes Change console Job name from *Console* to -Console- to eliminate
1896 Win32 filename problems. Put Win32 path separator when creating
1897 Console file. This fixes bug #846.
1898 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1900 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1902 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1903 to force Win32 error message.
1905 kes First cut strip path. The data should be passed to the FD,
1906 but nothing is done with it yet.
1907 kes Enhance the digest and signature routines in the crypto
1908 library to accept a JCR and to use it to print error messages
1909 so that they will go in the Job report rather than the daemon's
1911 kes Simplify some of the verify signature code.
1912 kes Simplify a few of the alternative returns in the signature
1915 ebl Use only POSIX regex instead of GNU regex in breg.c for
1916 File relocation. It fix broken freebsd compilation.
1917 kes Convert all other Dir files to use new ua class message
1919 kes Tentative fix for missing digest signature in bug 807.
1920 kes Correct handle problem in new win32_ftruncate routine.
1921 kes Convert ua_purge.c and ua_update.c to use new ua class
1922 message routines for bat.
1924 kes Correct incorrect installation of LICENSE in Win32 installer.
1925 kes Display LICENSE at the beginning of the Win32 install.
1926 kes Attempt to correct the need for the png files to be installed
1928 kes Reapply my bat.conf install script in qt-console. I think I
1929 editted bat.pro instead of bat.pro.in and it was lost.
1930 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1931 the /var/lock/subsys for subsysdir. Also corrects typos in the
1934 kes First cut update job.
1935 kes Correct configure to include qmake of src/qt-console directory.
1937 kes Make restore job yes/mod/no print in one command so GUI works.
1938 kes First cut implementing backup and restore client.
1939 kes Correct editing in Verify output that caused a seg fault.
1941 kes Insure that bat.conf is not overwritten during installation.
1942 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1943 while I was implementing migration in March 2006 !
1945 ebl Cleanup file relocation, using char *RegexWhere instead of
1946 char *where + bool where_use_regexp
1947 kes Update some manpages and add bat manpage.
1948 kes Make a first cut at converting bacula.spec.in for bwx-console
1950 kes Apply patch from John Goerzen to add hostname as fourth argument
1951 to make_catalog_backup script.
1952 kes Fix typos I introduced into bsmtp.c
1953 kes Make pm_strxxx() routines handle input of NULL pointer. This
1954 is to protect from NULL pointers returned from SQL databases.
1955 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1956 kes Add more debug to FIFO code -- fix fifo regression test.
1958 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1959 kes Add thread timer to bnet_connect() to break from OS if wait time
1962 kes Update Win32 build to include new files, new symbols, and
1964 kes Implement socket level heartbeat (tcp_keepidle)
1965 ebl Commit File relocation patch
1966 kes Make bat have 'make install' target.
1967 kes Warn during install if old gnome-console binary found.
1968 kes Warn during install if old wx-console binary found.
1969 kes Add -8 option to bsmtp command line to add content type utf-8.
1970 Fixes bug #809. (Character coding problem in bsmtp).
1971 kes If < is found in target (from, to, cc) then do not enclose the
1972 target in < > in bsmtp. Fixes bug #772 (malformed address).
1973 kes When printing certain items in dbcheck, stop after 300000.
1974 Fixes bug #822. (dbcheck loops).
1975 kes Incorrect status in Dir after waiting for mount with poll set.
1978 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1980 kes Print waiting to reserve a device every 5 mins.
1982 kes Don't call close_part in label.c if tape and relabel.
1983 kes Don't free volume if busy in close() -- should help with
1985 ebl Fix #824 RunScript bug (After script could be execute twice)
1986 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1987 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1988 Add a regression script to test RunScript
1990 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1993 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1994 deprecated. No additional bugs will be fixed, and they will be dropped
1995 in a future release (probably 2.4.0).
1996 kes Change name of wx-console to bwx-console to make it more Bacula
1998 kes Change the name of gnome-console to bgnome-console to make it
2001 kes Some time in March, a Feature Request with patch from Jorj Bauer
2002 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
2004 The ability for the director to validate a Client (FD) CN against
2005 an arbitrary set of patterns rather than the hostname, with
2006 A new 'TLS Allowed CN' set of directives which are implemented
2007 in the Client resource. Then pattern matching is used in place
2008 of hostname matching against the Certificate's CN. As an example, we
2009 have certificates which (a) use a local CA, and (b) have a CN of the
2011 kes Add new/changed entry points to Win32 build
2012 kes Create unaccepted-projects for projects that are not accepted.
2013 kes Simplify locking in the reservations system.
2014 kes Add more debug code in reservations.
2015 kes Make sure error condition on reserving a volume is handled correctly.
2016 kes Correct handling of volume_in_use.
2017 kes Correct handling of initializing a device.
2018 kes Move handling of broadcasting releasing a device into release_device().
2019 kes Correct attaching dcr to dev so that it is only done if device
2020 is properly initiated.
2022 kes Locking debug level tweaks in SD.
2023 kes Tweak new Volume code.
2025 kes Add exec external-command [wait-seconds] to bconsole. This
2026 executes the external-command. Note! normally external-command
2027 should be enclosed in double quotes.
2028 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
2029 it should normally be off in a production system.
2031 kes Implement die command for SD so that we can force it to dump.
2032 kes Implement SD lock debug code.
2033 kes Implement new algorithm for keeping Volume list in SD. It
2034 is now owned by the device.
2036 kes Implement new code for freeing in use volumes that should
2037 resolve if not all, some of the problems of multiple drive
2038 tape conflicts described in bug 801.
2040 kes Fix gui/bacula-web/images files in svn.
2041 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
2043 ebl Fix a bug in batch mode (in string escape)
2044 kes Correct migration prune SQL typo that crept in in a
2045 recent 2.1.x change.
2047 kes Move bnet_despool() into class in bsock.c
2048 kes Modify job report to include director name and Build OS.
2049 kes Move drop root privilege and check_catalog() before fork.
2050 kes Add update database scripts (version 9 to 10) to updatedb directory.
2052 ebl Check size and age of each file after its backup to see if
2053 it has changed during backup, if 'checkfilechanges' is set.
2054 The FD will do an extra check (stat(2)) after
2055 each file backup. mtime, ctime and size are compared with
2056 'before backup' information. If time or size mismatch, an
2057 error message will be generated. You must upgrade FD to use it.
2059 kes Make database name and user configurable
2060 --with-db-name=xxx --with-db-user=xxx
2061 kes Add back database type to message.c for debugging.
2063 kes Implement dir_sql() which issues an SQL query.
2064 kes Modify bat medialist to use dir_sql() and do some minor C++
2065 formatting as well as eliminating a number of pointers, simplifing
2068 kes Fix some of the mtx-changer grep commands for tape label readers.
2069 kes Convert a number of bsendmsg into the appropriate send/warning/error
2070 message class calls.
2071 kes Suppress the using database message in the .sql command.
2072 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
2074 kes Add context menu for floating a window.
2075 kes Some minor cleanup and name changes in qt-console
2076 kes Add doing mt setblk 0 in Win32 mtx-changer.
2077 kes Apply Martin's bug fix to move definition of ENODATA for
2079 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
2080 sqlite2 and sqlite3.
2082 kes More pruning cleanup.
2083 kes Turn on wait_for_drive by default in mtx-changer.
2084 kes Turn on Batch insert code by default as it now passes regression.
2085 kes Add ./configure --enable-bat to enable building of Bat.
2086 No install yet though.
2088 kes Implement a new .sql command for bat.
2089 kes Implement code to turn off pruning in obtaining the next volume.
2090 Pruning is turned off for the status dir command, but turned on
2091 for SD requests and for the list nextvolume command.
2093 kes Correct Qmsg() that was not updated correctly when committing a
2094 previous change (probably the recent TLS patch).
2096 kes Write new subroutine is_volume_purged() that explicitly checks
2097 if the Volume is purged, and if so marks it as such. This should
2098 resolve problems reported about needing to mount twice to recycle
2100 kes Rewrite pruning algorithm to do more work in the SQL engine, and
2101 to pass a list of JobIds to be deleted to SQL. Also, minimize the
2102 amount of duplicated code.
2103 kes Do volume pruning only for the Media Type desired (reduces pruning time
2104 if multiple Media Types are in the same pool).
2105 kes Implement more detailed info in the Job report for the Bacula version
2107 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
2109 ebl Add bbatch tool to bench database and insert mode.
2110 Fix sql quote stuff in batch mode
2111 Fix sql stuff for mysql
2113 kes Correct problems with am/pm scheduling. Fixes bug #808.
2114 kes Implement new prunning code that prunes up to 1000 jobs at
2115 the same time. The same technique can be applied to a number
2116 of other prune/purge subroutines.
2117 kes Add an insanity check when starting a new tape job to ensure
2118 that the tape position has not been changed. If so fail the
2120 kes Fix Win32 build for dlls to add the folllowing:
2121 src/lib/bsock.c -- new file with new entry points
2122 src/lib/dlist.c -- new entry points
2123 src/cats/sql_create.c -- new entry point
2124 src/cats/sql_cmds.c -- new DATA item exported
2126 ebl batch mode cleanup bscan-test is ok now.
2127 kes Implement SD code to check length of disk volume before appending.
2129 kes Correct return status on db_batch... routines.
2130 kes Add call to db_write_batch_file_records() to migration code.
2131 ebl Fix AfterJob timing
2132 kes Move the checking of the database in initializion of the Director
2133 to after we drop privileges. This avoids the need for both root
2134 and bacula access to the DB.
2135 kes Correct a misplaced variable definition in src/filed/backup.c
2136 kes Correct how the new batch insert db_create_attributes_record()
2137 uses the arguments. Caused a seg fault in bscan.
2138 kes Implement lock() and unlock() methods in DEVICE class.
2139 Implement block() and set_block(xx) methods in DEVICE class.
2140 kes Modify bnet_connect() so that it uses time() to check for the
2141 wait time expiring (on some OSes, some system calls may not
2142 return immediately).
2143 kes Modify Verify to obtain the previous JobId when it is actually
2144 running rather than at schedule time (as it was in 1.38.x).
2145 kes Fix src/job.c to handle MaxWaitTime correctly. This should
2147 kes When checking pid in pid file, continue running if the pid is
2148 the same as ours. This occurs on IRIX after a system crash.
2151 kes Extend new GUI API.
2152 kes Make the ua structure a class, and implement send_msg(),
2153 error_msg(), warning_msg(), and info_msg().
2155 kes Apply fix from for building wx-console on the Mac from
2157 kes Implement new select mechanism for GUI programs.
2158 kes Reorganize initialization of stackedWidgets in bat.
2160 kes Add updated nagios plugin supplied by Christian Masopust.
2162 kes More bat implementation.
2163 kes File migrate bug with Pool Occupancy using mediaid instead
2164 of jobids. Fixes bug #795.
2165 kes Fix orphaned buffers in filed backup and verify due to
2166 crypto buffers not freed during errors. Fixes bug #789.
2167 kes Extend new GUI api code to tree commands.
2168 kes Ensure that tree and dot commands check console ACLs.
2169 kes Permit marking directory with trailing slash.
2170 kes Allow 20 console connections (instead of only 10).
2172 kes Add smartctl call to bacula-sd.conf as an example of getting
2175 kes Modify jobq.c to let simultaneous restore jobs run. This may
2176 cause them to fail if they cannot get a drive.
2177 kes Add Client Connect Wait to Storage daemon to permit users to
2178 modify the time the SD waits for a FD connection.
2180 kes Correct virtual changer check which was backwards. This caused
2181 volumes to be unloaded into slots already occupied.
2183 kes Apply Command ACL filter to JobId list in restore command.
2184 kes Correct typeo in var.c patch.
2186 kes Don't let Bacula prune File or Job records for the current Job.
2187 kes Fix variable substitution pad + inc bug reported (with patch)
2190 kes Correct SQLite log table index as reported by Luca Berra.
2192 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
2194 kes Begin implementing new comm signals for API.
2195 kes Fix a few places in lib/message.c where the open fd may
2197 kes Continue implementing lib/bsock.c (real class). Make jcr,
2198 who, host, and port private. There are new methods to access
2199 them for non-class use. This required touching a number of files.
2201 kes Add LANG=C to autoconf/randpass so it works with languages other
2202 than English. Fixes bug #788.
2204 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
2206 You will not be able to generate Include/Exclude list any more.
2207 It will be fixed soon.
2208 If you want to use this, you can apply
2209 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
2211 kes Restore of sockets created false error messages because Bacula
2212 no longer restores sockets, but the code was still trying to
2213 set the attributes on a non-existent file. Reported by a user.
2214 ebl finish RecyclePool feature
2215 Media will takes Pool.RecyclePool
2216 when moving from Scratch to a Pool or when user will do
2217 update volume=xxx frompool
2218 To use it, add RecyclePool = aPool to your Pool resource
2221 RecyclePool = Scratch
2225 kes Expand new BSOCK class adding signal() and new BNET signals.
2226 kes Begin enhancing the dot commands adding a new API function
2227 that returns more information and will make it easier
2228 to interface to the Director from a program.
2230 kes Make DEVICE fd private. Its new name is m_fd, and can be
2231 obtained with dev->fd() outside the class. This is the
2232 first of many DEVICE members to be made private.
2233 kes Implement Michael Renner's idea on having a virtual disk
2234 changer. I made some minor modifications (e.g. I did not
2235 implement the Virtual Changer directive, but simply set
2236 the Changer Command to an empty string.
2238 kes Implement a BSOCK send() method that writes the whole record
2239 in a single write() request rather than in two.
2240 ebl add update volume=xxx recyclepool=yyyy
2241 volume takes recyclepool from pool when using update volume=xxx from pool
2243 kes Fix encryption deblocking bug, which caused some restored files
2244 to be truncated. This fixes bug #763.
2245 kes Add FD event sequence order prepared by Eric -- for RunScripts.
2246 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
2248 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
2249 ebl Use btime_t instead of uint64_t in media patch.
2251 kes Optimize the use of the database a bit in the Status dir command.
2252 Only open it when needed, ensure that if any previous database
2253 was opened, it is closed.
2255 kes Correct VolCatBytes bug from media patch.
2256 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
2257 in the case of orphaned records.
2258 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
2259 and File records in 300K chunks to be more efficient. This
2260 idea came from Juan Luis Frances (if I remember right).
2261 kes Apply Eric's scratch patch that moves a purged Volume to
2262 the RecyclePool. Question: how is RecyclePool set? what
2263 happens to the ScratchPool?
2264 kes Apply Eric's media patch that collects read/write media
2265 times as well as byte counts. This patch requires a
2266 simultaneous upgrade of the DIR and SD. Note, there
2267 should be some way to turn off timing. I'm not sure
2268 times are in Bacula units.
2269 kes Apply Eric's batch-insert patch.
2271 kes Update projects list.
2273 kes Implement Include/Exclude file lists in FD as dlists using
2274 the new dlistString class. This permits efficiently having
2275 large include/exclude lists and completes project Item 25.
2276 kes Fix dird/ua_cmds.c so that a cancel command checks if the
2277 console is authorized to cancel the job. This fixes bug
2279 kes Modify SD so that the VolCatJobs medium record is updated
2280 at the beginning of a Job rather than the end. This
2281 fixes bug #775 where exceeding MaxVolJobs caused jobs
2283 kes Added a mutex around getting and setting Volume information
2284 so that multiple simultaneous jobs will single thread.
2286 Switch to using Subversion
2287 kes Remove src/pygtk-console/ from configure
2289 kes Delete src/lib/btree.c from win32 build, then add rblist.c
2290 plus the entrypoints.
2291 kes Apply patch supplied that corrects debug print
2292 in canceling jobs for max run time. Supplied as
2293 part of bug #621, which was previously fixed.
2295 kes Test on job_canceled() and sd_msg_thread_done inside
2296 loop starting the message thread to avoid a race condition.
2298 kes Remove rl_catch_signal from console.c as it conflicted
2299 with the header definition. Fixes bug #765.
2300 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
2302 kes Clarify some stored/acquire messages to indicate if the
2303 problem is with read or append.
2305 kes Fix memory leak with storage ids in cats/sql_get.c
2306 kes Terminate watchdog earlier to avoid reference to released
2307 memory -- reported by Jason Austin.
2308 kes Move closing the database from jobq.c to the director daemon
2309 termination routine. This fixes memory leaks for shadow jobs
2310 (i.e. migration jobs).
2311 kes Free up the unique jobid chain items in migrate.c. This fixes
2312 a memory leak problem.
2313 kes Convert some ugly looking for statements to use foreach_alist
2314 in findlib/find.c. This will facilitate converting the structures
2315 to use dlist (for large include/exclude lists).
2316 kes Fix a bug in the btree.c and btree.h routines, then rename them
2317 rblist and add them to be built in src/lib. Include some new
2318 methods written by Rudolf Cejka that make the code more readable
2319 (hides some of the ugly casting).
2320 kes Add set_next() and set_prev() methods which make the code much more
2321 readable. Also add a new dlistString class that facilitates storing
2322 strings in dlists. To be used in the large include/exclude lists.
2323 kes Make some trivial modifications to lib/tree.h that use rblist
2324 rather than dlist for storing the tree links. This was suggested
2325 by Rudolf Cejka. The result of this is that the restore tree now
2326 uses red-black binary trees rather than simple linked lists. This
2327 should give rather dramatic speed improvements for directories
2328 contining large numbers of directories/files (more than 10000).
2330 kes Fix maxruntime bug #621.
2332 ebl Implement the include JobID in spool file name project.
2333 kes Reorder projects file in order determined by Jan 2007 vote.
2334 kes Implement item #12 on project list -- quick release of FD by
2336 kes Fix open of SQLite3 db where user does not have write permission
2337 so that DIR does not crash. Fixes bug #761.
2339 kes Add back missing @ in Win32 Makefile.
2340 kes Change 'Device not configured to autolabel' from INFO
2342 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
2343 which should restart an indefinite # of times.
2344 kes Fix configure --help to print --with-mysql[=DIR]. Same for
2345 other DIR specifications.
2347 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
2348 Fix path quoting in SQLite scripts.
2349 Fix problems with SHGetFolderPath.
2351 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2353 kes Fix Job restart on error bug that promotes an Inc to a Full
2354 backup. This should fix bug #755.
2355 kes Add qt-console and first cut of code.
2359 kes Fix Bacula->Documentation link on Win32 to point to index.html
2360 instead of bacula.html. Fixed bug #750.
2361 kes Return JobId in db_get_job_record() when JobId==0. This should
2363 kes Do not release source pointers when restarting a failed job.
2365 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2366 This *should* fix bug #747.
2367 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2370 kes Modify USTORE constructor to set an empty store_source string,
2371 and don't copy the store_source string in a cancel. Hopefully
2372 this will fix Arno's seg fault, bug #744.
2373 kes Add back code to disable conio in configure. Fixes bug #743.
2374 kes Correct the Options scanner in the FD to correctly handle
2375 SHA1 option, which was eating the next option. Reported by
2377 kes Add code to indicate when the SD is spooling, spool wait, and
2378 despooling as requested by Alan Brown.
2380 Version 2.0.0 released: 4 January 2007