1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
17 - Allow Duplicate Jobs
18 - Allow Higher Duplicates
19 - Cancel Queued Duplicates
20 - Cancel Running Duplicates
21 Ensure they work with RerunFailedLevels
25 Improved status commands for Bat
26 Spooling/despooling status
27 Implement ftruncate for NFS devices
28 Add long term statistics job table
34 kes Change Bacula trademark owner from John Walker to Kern Sibbald
35 kes First non-working cut of vbackup
36 kes Correct FD heartbeat code to use volatile variable accessed by
38 kes Zero thread id with memset if on Win32 in case it is a struct.
39 kes If cannot create JobMedia record, continue to try to write eof
40 and clean up in block.c
42 kes Add code to interface OpenSSL to new Win32 pthreads code which
43 used a structure for thread_t.
45 ebl tweak bat for win32 compilation
47 ebl Remove tokyo cabinet from the source
48 ebl Update configure/autoconf to support berkeley DB
49 ebl Add a sort to db_get_file_list() to improve bsr construction time.
51 kes Add a mtx-changer.conf file that is not overwritten during
52 an upgrade. It fully configures the mtx-changer script.
53 kes Clear in-use bit on vol when unused while swapping.
55 kes Remove sleep at end of ./bacula
56 kes Clear hash packet for hardlinked files correctly. This corrects
57 a long standing bug where hardlinked files selected individually
58 would occasionally not be restored.
60 kes Apply Eric's patch to ensure that autoprune does not return
61 a Volume not in the autochanger unless requested to do so.
62 kes Correct bat restore display of multiple drives. This fixes
64 kes Do find_a_volume() each time an unload is done. This
65 fixes the failure of maxvol2-test.
67 kes Add some SD debug code.
68 kes Do find_a_volume() each time an unload is done.
69 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
70 and adds --with-db-port to ./configure.
71 kes Use Qmsg() in job.c watchdog callback.
73 kes Release main control rwlock if ABORTing.
74 kes Make watchdog connect timeout queue messages rather than sending
75 directly to avoid lock conflicts with the real thread.
76 kes Add const char in dbd.c to avoid compiler warnings.
77 kes Fix python compiler string warning. Note, IMO the GNU C++
78 compiler guys have made a *very* bad change to their compiler.
79 They now force all strings to be 'const' unless you explicitly
80 cast them, which is extremely ugly and ruins nice code as well
81 as creates a lot of useless work.
83 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
84 mt. This fixes bug #1116.
85 kes Add const in python files to reduce compiler warnings.
86 This may have to be backed out because of later compiler
88 kes Fix failure of 2drive-concurrent-test. Always read label;
89 clear_unload() only after drive is defined in acquire_for_read().
91 kes Generally clean up the manual tape loading code. The main
92 conceptual change is that when a volume is marked to be unloaded,
93 its volume name is retained, and it is only marked as unloaded
94 when either the autoloader says it is unloaded or another tape
95 is read on that drive.
97 kes Add debug code and refactor subroutine in stored/mount.c
98 kes Fix format problem in bscan output reported in bug #1105.
99 ebl Fix get_next_volume_for_append logic with autochanger
100 - use pruned volumes if found
101 - don't reset the inchanger flag after getting a recycled volume
103 Fix recycle_oldest_purged_volume to take InChanger flag in account
105 ebl Add mmap/unmmap implementation for tokyodbm under win32
107 kes Make first step toward eliminating globals from config
108 scanning. Also should be a workaround for FORTIFY_SOURCE
109 GNU C bug -- fixes bug #1042.
111 kes Apply duplicate job tests to restarted jobs.
112 kes Copy more data when restarting a job so that run
113 overrides are kept. This should fix bug #1094.
115 kes More word alignment cleanup.
116 kes Fix bug where SD did not ask operator if the device could not
117 be opened. Reported by Eric.
119 kes Add dbuser to DIR conf file (replaces user).
120 kes Add --with-db-password to ./configure
121 kes Fix regress to handle db_password.
122 ebl Add new "status storage slots" that list autochanger
124 ebl Update vtape driver to compile only under Linux.
125 ebl Fix a bug when restoring with a wrong mediatype.
127 kes Eliminate ints from conf files and structures to avoid
128 word alignment problems
130 kes Fix bug reported by Scott Barninger where the bacula script
131 refers to scripts in the wrong directory. Needed to meet the
132 requirements of recent FHS location changes.
133 ebl Disable vtape for FreeBSD.
135 ebl Modify disk-changer to check if slot contains something before
138 ebl Fix vtape on win32 and debian.
139 ebl Fix autoselect patch (cause segfault).
141 ebl Fix autoselect option broken for a while. Fix #1089. Need some
142 work with StorageId to be able to use a particular drive in a
145 ebl Rename vtape to vtape.
146 ebl Update vtape driver.
148 ebl Modify vtape driver to avoid sparse file.
149 kes Add make clean of qt-source directory during ./configure
150 kes Store last block number written to tape in DEVICE and
151 use it for testing for correct last block on EOT.
153 Release Version 2.4.0:
157 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
158 This fixes bug #1095.
160 kes Add create_postgresql_database.sql to Win32 installer. Should
161 fix problem reported by Juilio Monteiro.
162 kes Get correct slot when auto unloading a device. This fixes bug
165 kes Fix multiple media restore.
166 kes Make DEVICE Slot private and access it via a method.
167 Allows better control over when it is set and cleared.
168 kes Fix possible seg fault if SQL error.
170 kes Add Martin's fixes to argument scanning for the estimate
171 command. This fixes bug #1093.
172 kes Add debug code to SD.
173 kes Fix renaming a Volume, which used the wrong Volume name.
175 kes If operator has rewind tape, print warning, release tape and
176 try once more. If tape is positioned somewhere, something went
177 wrong, so mark the tape in error and try once more. Previously
178 this error was fatal, now it produces an error message.
179 kes Ensure correct volume name displayed during restore
180 kes Ensure that Volume is mounted for restore.
182 kes Fix a few more Coverity reported problems.
184 kes Apply Allan Black's status dir job count patch.
185 ebl Add information about IMPORT/EXPORT slots in mtx-script.
186 kes Enhance a couple of SD debug messages.
187 kes Tweak unload flag setting and ensure it is set during swap.
189 ebl Fix #1091 about bad output in estimate command.
191 kes Modify autochanger locking to attempt to avoid race
193 kes Make sure device not busy before doing label command.
194 kes Display open() errors except when polling. Previously too
195 many were suppressed. This should fix bug #1070.
196 kes Fix Win32 reparse points. Bacula will not recurse into any
197 reparse point directory, including mount points, unless the
198 directory is explicitly mentioned at the top level (same as
199 with Unix). A file that is linked to another file will be
200 backed up -- much as Unix does for hardlinked files.
201 This fixes bug #1041.
203 kes Remove double quotes from ChangeLog and ReleaseNotes
204 kes Remove StorageId test when pruning and recycling (Eric's changes).
205 kes Remove old form of locking when getting volumes -- causes deadlock.
206 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
207 the name unique and to eliminate compile time error.
208 kes Add accurate.o to Win32 FD Makefile
210 kes Fix cats dll build on Win32 after db_update_job_end_record
211 calling sequence change.
212 ebl Switch to tokyo dbm instead of htable in accurate code
213 ebl Include tokyo dbm to bacula source tree
215 kes Fix buffer overruns detected by Coverity.
217 kes Tweak joblog display.
219 kes Implement --without-qwt
220 kes Fix layout of restore tree dialog
221 kes Add configure bat QWT libraries, so that bat can be built
222 with or without the QWT libaries.
224 ebl Add dummy tape driver for regression tests.
225 kes Make sure we unload the right slot when swapping.
227 kes Add debug times, reduce size of two-pool-changer test
229 ebl Tweak autoconf scripts for vtape
231 kes Improve SD reserve debug code.
232 kes Testing an improvement to free up volumes no longer in use.
234 kes Rework SD acquire for read to handle autochanger Volume
236 kes Implement regression that explicitly tests swapping a Volume
237 from one drive to another.
238 kes Enhance disk-changer to detect most error conditions.
239 kes Fix SD code so that it properly swaps a Volume between drives.
240 This fixes bug #1083.
242 kes Apply libdbi patch from Joao Freitas for regress and for
243 Bacula trunk. Regress now works with libdbi. Nice.
244 kes Apply .nobackup patch from bug #1077 submitted by
246 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
247 name into jobs cloned via the run directive.
249 kes Prevent a Volume that is being swapped from being freed from
250 the volume list. This will most likely fix, at least partially,
252 kes Fix strippath so that it does not get a buffer overrun and crash FD.
253 This fixes bug #1078.
254 kes Remove 50 millisec wait in SD that broke debugger.
255 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
256 that a job may run, counted from when the job was scheduled.
257 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
258 a job may block waiting for a resource, counted from when the job starts
259 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
260 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
261 that implements multiple commands per line in the console when using
262 readline. Modify the default to use a semicolon as the command separator.
264 ebl Fix SQL query in migration code.
265 ebl Make accurate mode with hash disk pass regression tests
267 ebl Implement first cut of accurate backup with hash disk.
269 kes Force unload of volume when wrong volume mounted in SD.
271 kes Fix bat seg fault at termination.
272 kes Add Bacula generated version to bat about box.
275 kes Experiment with allowing multiple read jobs.
276 kes Move final volume swapping code to DCR method and
277 call it from acquire_for_read().
278 kes When wrong volume is mounted during read, unload_autochanger.
280 kes Integrate the libdbi changes from Joao Henrique Freitas
282 kes Stop searching for Volumes in SD askdir if DIR returns the
283 same volume name twice in a row.
284 kes Close bat console windows first to eliminate error message
287 kes Tweak the swap Volume from one drive to another code so that
288 it now seems to work.
289 kes Resolve several problems with recycling that broke the new
290 code (these problems are in 2.2.9 as well).
291 kes Remove the volume lock when calling the sysop code.
292 kes Don't mark a reserved volume with no writers as unused otherwise
295 kes Rework class structures for VOLRES, DCR, and DEVICE to make
296 the method names a bit more logical, and for more logically
297 handling the responsibilities.
299 kes Remove redundant code in terminating the scheduler that just
300 causes a seg fault in many cases.
301 kes Cleanup releasing a volume and make it a DCR method.
302 kes Improve algorithm for detecting pre-reserved volume and
305 kes Tweak volume swapping code so it works.
306 kes Correct name overloading in mount.c
307 kes Replace released flag in VOLRES with reserved and add access
308 methods for the VOLRES class.
309 kes Prevent volume from being released while being swapped.
310 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
312 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
314 kes Refactor parts of stored/mount.c
316 ebl Add sanity checks for VolWriteTime and VolReadTime
317 ebl Take care of bad clock changes while computing VolWriteTime
318 and VolReadTime. This should fix or limit #1066
319 kes Correct error string numbers in dird/catreq.c
320 kes Restructure reserving, acquiring, and mounting volumes. Calls to
321 autochanger are deferred for mount.c -- simplifes the code.
323 kes Do not prune any running job. It just fails the job.
324 kes Lock the volumes when changing dev->reserved_device and marking
325 the volume unused otherwise the device can get reserved by
326 another job before the volume is released, thus blocking it.
328 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
329 kes Fix bug #1063, reuse of freed ptr in list nextvol.
330 kes Release regex compile buffer in filed/job.c
331 kes Add proper type of const char in sql_create.c
332 kes Turn off debug in daemon termination routines
333 kes Move free_volume_list() before devices are freed in stored.c
334 kes Fix reference to uninitalized stack variables in bregex.c.
335 This should correct bug #1067.
337 kes Fix possible seg fault in SD when freeing a volume entry.
339 kes Implement unload_dev() before swap device.
340 ebl Add statistics prunning with option and menu
341 kes Separate unload_dev() from unload_other_device() in autochanger.c
343 kes Apply patch from bug #1069 that corrects spurious error messages
344 when ACLs enabled on SGI but no ACL exists.
345 ebl Fix small segfault in bacula-sd when debug level is 500
346 kes Modify run_program() and run_program_full_output() to use
347 call by reference for the results string. This corrects a long
348 standing problem where the address of the string may be changed
349 in the subroutine but not in the calling program.
351 kes Re-enable code to remember last volume mounted on a non-tape
353 kes Add patch supplied in bug #1068 that fixes a SD crash when using
354 a Virtual autochanger.
355 kes Generate correct JobMedia records during spooling/despooling when
356 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
357 <tih@hamartun.priv.no> for excellent analysis and testing.
359 kes Tweak hash algorithm for htable using Martin Simmons idea
360 for doing a circular shift.
361 kes Remember what volume is in VTLs (previously turned off for
363 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
364 pointed out some problems in creating JobMedia records during
365 spooling with concurrent jobs. Fix the problem by updating the
366 start file position before despooling and generate a jobmedia
367 record at the end of despooling.
369 kes Fix handling of JobMedia records during spooling and when a
370 Volume is changed without actually writing data to the Volume.
372 kes Rework certain SD locking based on gdb tracebacks of deadlocks
373 sent by Eric. This code now uses only the volume_lock() rather
374 than the reservations lock when at EOM and acquiring a new
376 kes Ensure only one exit point in several subroutines.
378 kes Implement bsock code to permit locking. Use the new code in Verify
379 in the FD to prevent the heartbeat thread from disrupting the Verify
380 data sent to the Dir.
381 kes Modify SD locking to eliminate locking the reservations system from
382 outside the system. Use the volume lock when getting media data
383 and reserving a new volume at end of media.
384 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
385 when SD starts are not locked into place.
387 kes Fix error compiling runscript code on 64 bit machines.
388 kes Tweak Win32 mount point code.
389 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
390 cleared giving bad file estimate).
391 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
394 kes Keep Schedule run lists in order as suggested by
397 kes Implement autostart scripts for Debian.
398 ebl Implement upgrade catalog scripts.
400 ebl Apply jobstat patch for long term statistics. Have to implement
401 purge stats command and upgrade scripts.
402 kes Fix mtx-changer.in for broken Debian mt program.
404 kes Fix large number of JobMedia records reported by Eric Bollengier.
406 kes Apply doc fix from bug #1062.
407 kes Resolve crash and improper restore wx-console Win32 restore
408 GUI. Fixes bug #1065.
409 kes Update Win32 wxWidgets to latest version.
410 kes Attempt to do correct handling of Win32 mount points. Should
412 kes Fix Win32 FD backup/restore memory leak due to improper termination
413 of BackupRead/Write. This fixes bug# 1038.
415 ebl Reduce memory usage for accurate backup, working only with ctime
416 and mtime. (not all Lstat field)
417 About 40MB for my Linux system (400.000 files)
419 kes Add dcr->reserved_volume flag that allows us to release a volume
420 even if it is not vol->released. This allows maxvol2 to work when
421 Volumes expire and we are already writing to the device (i.e. a
422 volume is pulled out from under us by another job terminating after
423 we reserve the drive).
425 ebl Permit multiple command/console per runscript definition.
426 RunScript { command = /bin/true ; command = /bin/false ... }
427 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
428 (restart an application) just after the VSS snapshot on windows.
429 kes Don't zap dcr values during release_volume() as they might
430 have the next Volume to be mounted.
431 kes Fix AIX prototype.
433 kes Second cut of drive switching during backup.
436 kes Update Win32 version of wxWidgets to most recent version.
437 kes Tweak Copy job details.
438 kes Rework dir_find_next_appendable_volume to make a bit more effort
439 to find a suitable volume before giving up.
441 kes Make ask_sysop_to_create... to return if waken from wait.
442 This helps get out of blocked conditions.
443 kes Experimental implementation of switch_device in reservations.
444 kes Implement FD version to allow easier protocol changes.
445 kes Add Plugin Options string -- not yet passed to FD.
446 kes Implement PluginOptions ACL.
448 kes Attempt to correct problems with restores with autochangers and
449 use counts going negative
450 kes Rework SD status command and implement API for bat. Implements
451 header, runing waitreservation, devices, volumes, spooling,
452 and terminated status keywords.
453 .status storage=xxx <keyword>
454 kes Clarify TLS error message by adding double quotes around name.
455 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
456 kes Pass jcr to tls routines so debug messages can be handled better.
457 kes Rework jobq resource allocation code, and possibly fix a bug
458 that caused reference counts to get out of sync.
460 kes Rename fd/dir plugin to use Bacula standard underscore.
461 kes Plugin work -- bring dir up to fd level.
462 kes Start implementation of VTL code
463 kes Fix Win32 build after adding new cats subroutine.
465 kes First cut at Duplicate Job implementation.
467 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
468 kes Start PluginOptions string, and refactor a bit of ua_run.c
469 ebl Apply Allan patch that permit to reset recyclepool.
471 kes Test patch -- possible fix or improvement for bug #1053
472 kes Refactor FD and SD status commands to permit new API code in
473 SD, and to fix Win32 build.
474 kes Win32 build is now working.
476 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
477 some ideas in patch from Scott Bailey.
478 kes Begin implementation of duplicate Job control.
479 kes Fix some of Win32 build after recent additions.
480 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
481 which causes the FD to detect whether or not the OS has the
482 honor no dump bit (*BSD systems), and if so, to skip backing up
483 any file with this bit set. The feature is enabled by setting
484 'honor no dump flag = yes' in the Options section of a FileSet.
486 kes Correct po warning message with datarootdir
487 kes Implement more code in dird.c to put configuration parsing in
488 a class rather than use globals.
489 kes Restructure SD status command for implementation of bat API
492 kes Suppress incorrect 'Will not descend from x into y' messages.
493 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
494 daemon globals used by parser.
495 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
497 kes Fix free of plugin_list when none exists.
499 ebl Apply accurate project patch.
501 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
502 on non-mempool object)
503 kes First cut of converting FD .status to work with bat API.
505 .status client=XXX header
506 .status client=XXX running
507 .status client=XXX terminated
508 kes Implement first cut of Copy Job.
509 kes Implement Catalog in Pool resource. It overrides catalog specified
510 in the Client resource.
512 kes Apply patch (with some difficulties) from Joao Henrique Freitas
513 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
515 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
516 ftruncate() actually works. In the case of some (cheap) NAS devices,
517 it does not, and so recycling NAS Volumes does not work. The code
518 simply unlink()s the file, then recreates it. This fixes bug #1011.
520 kes First incomplete cut of big malloc blocks for htable.
521 kes Tweak plugin code.
523 kes Plugin debug code + tweak a couple bat dialog layouts
525 kes Fix creating first JobMedia record during Migration to include
526 proper index. This caused slow restores of migrated jobs.
527 kes Temp fix to plugin name file_index.
528 kes Bacula backed up and restored a MySQL database.
530 kes Implement plugin restore.
531 kes Implement parsing of db_driver to give db_type index.
533 kes First cut of plugin restore code.
534 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
535 and do not strip paths on symbolic links.
536 kes Set catalog backup database and user name from values specified on
537 the ./configure line.
538 ebl Fix #1031 about wrong pool source information in job report.
541 kes Remove a redundant jcr argument to find_files, match_files, and
543 kes Implement '.status dir header|scheduled|running|terminated' that
544 prints the requested status section. With the exception of the
545 header, the other reports have fields separated by tabs (\t).
547 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
548 a resource embedded run command to find a since time if no explicit
549 since time was supplied on the command line.
550 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
551 that updates the state file at job termination time in addition to
552 when the daemon terminates.
554 kes First version where a plugin did a backup.
555 bpipe-fd.so created a backup file, wrote a test
556 string to it, and Bacua could restore this fabricated file.
558 kes Implement DB Driver = string for the DBI driver.
559 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
560 kes First cut of code for loading Win32 plugin dlls. Implement
561 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
562 and implement a dlfcn.h file based on opengroup's definitions of
565 kes First cut plugin directives.
567 kes Apply patch from bug #1049 to prevent stripping the path on a
569 kes Attempt to fix bug #1047 where stripping a path corrupts the
570 heap. Waiting for feedback.
571 kes Correct the Mount message not to suggest labeling a new tape
572 when doing a restore. Submitted by email by John Stoffel.
573 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
574 FD by using casting. Reported in bug #1042.
576 kes A bit of crypto cleanup. More later.
578 Release Version 2.2.8
580 kes Apply patch from Martin to correct bug #1040, bscan sets existing
582 kes Fixed important spelling error in doc -- bug #1045.
584 ebl Fix bextract to be able to extract non-portable Win32 data to
586 kes Move initialization of read/write res lock earlier in the code.
587 This fixes the crash with a null conf file. This fixes bug
589 kes Redefine CURES in lib/parse_conf to be URES and move it all
590 into lib/parse_conf.c -- this responds to bug #1042, but does
591 not fix it. The fix is not to compile with FORTIFY_SOURCE.
592 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
593 the trunk SVN. I don't think this was reported as a bug.
595 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
597 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
599 kes Add DataDespooling and DataCommitting status (committing is
600 the last despooling).
601 kes Finish implementation of new reservations code noted below.
603 kes Fix bsnprintf for float point numbers. I broke recently when
604 parameterizing some variables. This fixes bug #1036.
605 kes Undo recent reservations changes ... will apply them later
606 when they work better.
608 ebl Fixes #1034 which cause mysql to hang the connection after 8h
609 ebl Change default statistics target of filename.name and path.path
610 fields for PostgreSQL. This speeds lookup by indexes. Thanks
612 kes A few more tweaks to new reservation code. Make sure to clear
613 vol released flag when retaking volume. When reading label and
614 label is bad mark volume unused. When recycling, mark volume
615 unused so it can be renamed.
617 kes Fix reserve_volume() so it doesn't release a volume in use
618 (i.e. a volume entry not marked released). This should be
619 the last part needed to fix bug #1018.
621 kes Move Heartbeat documentation from Job to Director resource.
622 This fixes bug #1033.
624 kes Fix existing switch drive SD code to call autochanger to release
625 any old volume. This must be done to keep the autochanger from
626 releasing subsequently newly reserved volumes in doing a close().
627 This should fix bug #1018.
628 kes Fail if attempting to get console input in batch mode. This
629 should help fail RunScript console commands that are incomplete.
630 kes First cut implementing switch_drive() in SD (not actually called).
632 kes Implement first cut running console commands in a RunScript.
634 ebl Fixes bug #1028 where 'Selection Type' option was not usable
636 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
639 Release Version 2.2.7
641 kes Add new free_tls() entry point so that Win32 builds.
642 kes Fix compile warning in src/lib/util.c
643 kes Fix entry point for edit_job_codes() so that Win32 builds.
644 kes Fix seg fault Frank Sweetser reports in regression testing
645 on his systems. The problem was that the original author of
646 bsnprintf.c did not take into account the side effects of
647 using ++x in the argument to a #define.
648 kes Make SD protocol backward compatible with version 2.2.x.
650 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
651 because Bacula no longer restores sockets.
652 ebl Always use ignorecase fileset option on win32 FD.
654 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
655 that implements double quoting include names in conf files,
656 and also allows piping input by having the first character
657 be a vertical bar (|).
658 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
659 that implement %f in RunScripts to pass the FileSet name.
660 kes Skip leading | when lex input comes from a pipe as suggested
661 by Michael Stapelberg <michael@stapelberg.de>.
663 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
664 Nerijus Baliunas <nerijus@users.sourceforge.net>
666 kes Implement Plugin Directory and plugin events.
668 kes Implement a security enhancement: TLS authentication but no
669 encryption. Enabled by setting 'TLS Authentication = yes'.
670 Note when this is on, TLS encryption is turned OFF!
672 kes This patch corrects a problem where the maximum concurrent storage
673 jobs counter gets out of sync during restore jobs causing jobs to
674 'wait on max Storage jobs'. This patch fixes bug #1009.
676 kes This patch fixes bcopy so that it produces correct Volumes.
678 kes This patch eliminates spurious output to the console during a VerifyVolume
679 job that contains encrypted data. It fixes bug #1024.
681 kes This patch prevents the 'status dir' command from trying to use a scratch
682 volume and possibly moving it from one pool to another. This patch fixes
685 kes Add new include to postgresql.c suggested by Marc Cousins so
686 that it compiles correctly with pgre version 8.3.
688 kes Fix --archivedir addition to configure. Replace it with
689 --with-archivedir in configure.in This fixes the regression
691 kes This patch fixes bug #1012 where the job is canceled because
692 of Max Run Time exceeded when the job has not yet started.
694 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
695 one 'part' to write. Instead of each part being stored on disk,
696 written to DVD, then deleted from disk, all parts are written to disk,
697 and only the last is written and deleted from disk.
698 kes This patch fixes the status command to include the formating string for
699 JS_AttrInsterting. It fixes bug #1021.
700 kes This patch should fix the Mac OS X build problem on the latest
701 Darwin, where sys/types.h was not included correctly (apparently
702 due to a change in the Mac headers). The solution was to explicitly
703 ensure that it is defined for the ./configure.
704 This patch also has a rebuild of configure that includes the Debian
705 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
706 kes This patch should ensure that queued messages to the console are
707 displayed as soon as possible. It should fix bug 1007, but has been
708 reported not to work.
710 kes This patch fixes the infinite loop when trying to increase the
711 maximum number of volumes in a Pool during the add command.
712 This patch fixes bug #1008.
714 Release Version 2.2.6
716 db Remove extra data on estimate command in joblist for bat.
718 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
719 really change anything, but is the beginning of doing it *right*.
720 To do it completely right the LastWritten date must be passed to
721 the SD, but it is not yet done.
722 kes Minor tweaks to some bat restore SQL.
723 kes This patch fixes bug #1003 where putting the message output from
724 a Verify job into the catalog results in a recursive loop. The problem
725 seems to show up only with postgresql (to be verified).
726 kes Correct %x to %p in postgresql debug statement.
728 kes Fix bug #942 where lots of emails where generated when the heartbeat
729 interval was low and Bacula wanted a different tape from the one in
732 ebl Add new SD despooling attributes and Dir inserting attributes
733 job status codes in the catalog (Status table).
735 ebl Use qmake-qt4 instead of qmake when available (debian system).
737 kes Add a security warning to src/cats/make_catalog_backup.in indicating
738 that passing the password via the command line (arg 3) is insecure.
739 This responds to bug #990 (it doesn't fix it).
741 kes Set default debug_level to zero. This corrects bugs #991 and #993.
742 kes Fix a crash in bat when it cannot connect to the Director for example
743 if the Director is not running.
744 kes Remove redundant INDEX (JobId) from File table in the trunk.
746 kes Make explicit exception to GPL in LICENSE to permit linking
747 the Win32 FD with Microsoft VSS code.
748 kes Apply the Solaris package patch from
749 Masopust, Christian <christian.masopust@siemens.com>
750 kes Apply the patch to optionally add a timestamp in the debug output
751 submitted by Mariusz Czulada <manieq@wp.eu>.
753 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
754 backend (sql_strerror). Fixes bug #989
756 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
757 It applied with no problems.
758 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
760 kes Redirect stderror to stdin on mt status command in mtx-changer.in
761 since the status is returned on stderr on Solaris.
762 kes Activate Close button on tray-monitor window. This fixes
764 kes Check for NULL item in parse_conf.c before calling it. In the
765 case of Device, there is no item and this caused a seg fault when
766 Device appears in the conf file.
767 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
768 avoids pulling in config.h multiple times in some new code.
770 kes Fix spurious warning message printed when creating a volume with
771 a LabelFormat. This fixes bug #976.
773 Release Version 2.2.5
775 kes Add JobId in place of Job name in all the Jmsg() output.
776 kes Correct the APP_DESC for the Win32 storage service (remove an e).
778 kes Make maxvol-test and new more strict maxvol2-test work.
779 kes Print JobId in all Jmsg() job output.
781 kes Add new SD despooling attributes and Dir inserting attributes
782 job status codes. This fixes bug 961.
783 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
785 kes Fix doc issue. This fixes bug #963.
786 kes Fix listing performance problems in bat. Pointed out by
788 kes Remove old debug code.
789 kes Fix bat code that tests for Win32. This should fix bug #968
790 kes Query 5 list wrong Vol after migration. This fixes bug #960
792 ebl Fix #969 where user can't change Replace option in restore menu.
794 kes Save jcr in thread specific data (tsd) for each thread.
795 kes Make Dmsg() print JobId as -%u.
796 kes Make Jmsg, Emsg, and others automatically pickup the jobid
797 for the thread if it exists.
798 kes Remove old reservation debug jid code.
799 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
800 ebl Add an option that permit to specify spool size in job
801 definition. (Applying patches/testing/spoolsize_per_job.patch).
802 You must upgrade SD and DIR at the same time.
803 dvl Add new configuration item --archivedir
804 dvl Adjust regression tests to use tmp not /tmp. This will allow
805 multiple concurrent runs of the regression tests.
807 kes Fix race condition that drops final block written to volume.
808 This happens in rare cases with multiple simultaneous jobs
809 when the Volume fills. This fixes bug #964. May be related
810 to bug #935 and possibly #903.
811 kes Eliminate more strerror() and replace with bstrerror().
812 kes Remove BSD getopt and replace with unrestricted IBM version.
813 kes Fix Win32 build for changed calling sequences.
814 kes More tweaks to the mount volume routines to get everything
815 right. Changed variable name from find to have_vol, which is
816 much easier to understand.
817 kes Enhance btimer debug code.
819 kes Fix FD->SD authorization failure, which was due to spurious
820 wakeups from a pthread_cond_timedwait(). Simply check the
821 predicate before continuing. This fixes bug #953.
822 kes Add const char where needed (more to do). Remove temp debug code.
824 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
825 kes Don't overwrite error message in check_tables_version.
827 kes Unlock batch insert tables with same calls used elsewhere.
828 kes Allow starting 59 jobs a second.
829 kes Make SD session key more random.
830 kes Add retry for SQLite opening db if it fails. Probably helps
832 kes Suppress extra error messages during batch insert failure.
834 kes Add jcr to timer packets so if killed message can be sent to job.
835 kes Add JobId to all Dmsg() output.
836 kes Put some FD auth code on dbglvl rather than fixed.
837 kes Return insert attributes error message in db msg buffer to avoid
838 false error messages. Helps fix bug #966.
839 kes Separate batch init error messages. Probably helps fix bug #966.
840 kes Make SD code that contructs attribute insert check string lengths
842 kes If Dir gets an error during inserting attributes, cancel SD.
843 This reduces unnecessary error messages.
845 kes Correct search boolean for getting Volume info
846 ebl Cleanup batch insert code. Probably fixes bug #965.
847 kes Back out one small change to the reservation system (reserving a volume).
848 kes Rework how a Volume is mounted. It is now much more intelligent and
849 will always attempt to use any mounted volume if possible and reduces
850 calls to the Director asking about volumes.
852 kes Turn off some code when batch insert not enabled.
853 kes Edit FD name in connect error messages.
854 kes Rework the reservation system to take into account that the Director
855 might give us a Volume that is different from the current one being
856 used, and to ensure that we don't exceed Maximum Volume Jobs.
857 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
858 fatal error with multiple jobs running'
859 kes Add more debug code in reservation system.
860 kes Implement maxvol-test to check bug #947.
862 kes Add code to handle tray monitor separated from Win32 FD.
863 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
865 kes Add missed return in fixing verify bug -- trunk only.
866 ebl Fix a command parser issue causing a director segfault.
867 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
869 kes Increase the max block size to 4MB fixes bug #957.
870 kes ERABT if user sets min block size > max block size. Fixes bug #956.
871 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
872 is not properly mounted (recognized) during a poll.
873 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
874 Job that has differences reports Verify OK.
875 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
877 ebl Add an option to operate on all pools with update vol parameters.
878 This complete the project 20. Patch from Nigel Stepp.
879 ebl Add history support to bconsole when using readline.
880 Using Ctrl-D to exit doesn't update .bconsole_history
881 kes Modify new volume algorithm to use max MediaId for generating next
882 volume number rather than the count of Volumes. This should essentially
883 eliminate the failure rate if some volumes were deleted. Bug #921.
884 kes Begin implemention of Optimize Job Scheduling.
885 kes Implement restore callback that Dirk and I agreed on for bat
886 restore. This fixes bug #928. Restore of backup of zero files fails.
887 kes Fix SQL Catalog logging which broke with new db_escape_string
890 Release Version 2.2.4
892 kes Fix bacula_cats.def for new db_escape_string().
893 kes Increase size of name string when FD making connection to SD.
894 May fix bug #953. FD->SD connection failure.
896 kes Add code to help Dan debug 2drive-incremental-2disk test.
897 kes Add code to try to fix bug #908.
898 kes Add waits to multiple exit detection code to try to force pid
899 file to always be deleted.
900 kes Restore good dev.tar.gz to rescue set appropriate binary property.
902 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
903 trying to switch drives by checking for blocking before unblocking.
905 kes Cancel storage daemon in all cases where FD reports error. This
906 should fix virtually all cases of bug #920.
907 kes Fix db_escape_string() for MySQL which did not compile.
909 kes Fix error message that was clobbered when Dir tells SD it does not
910 have write permission on Volume. This should fix a minor point
911 in bug #942, but not the main problem.
912 kes Add code to cancel job in SD if FD connection fails. This should
914 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
915 dvl Pass jcr and db into db_escape_string() to enable better escaping
917 kes Fix migration code to get correct Volume name with multiple volumes
918 by skipping |. Fixes bug #936.
919 kes Implement patch supplied by Landon to fix bug #944 where using
920 TLS with bconsole uses 99+% of the CPU.
921 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
923 kes Move patches into patches directory.
925 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
928 ebl Using 'm' in bconsole will show messages like before,
929 and not memory usage.
930 kes Fix bug #935, and probably also bug #903 where files were not
931 restored. MediaId was not properly set in JobMedia record after
934 kes Suppress chown and chmod error messages if the FD is not running
937 kes Apply Martin Simmons' patch that should turn off the new API usage
938 when batch insert is turned off allowing building on older
940 kes Add ./configure search in qwt-qt4 for qwt package
942 kes Bacula is now free of 3rd party GPL copyrighted code!
944 kes Add guid_to_name.c/h which replace idcache.
945 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
947 ebl Detect if new PosgreSQL batch insert API is present.
948 kes Correct incorrect mempool call causing Director crash. Occurs on
949 systems without va_copy().
950 sb Update spec files for 2.2.1 release
952 kes Fix memory pool call in ua_output.c. bug #934.
953 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
954 Add test program to fnmatch.c
956 kes Integrate patch to README.vc8 from
957 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
958 edit it to get it into Unix patch format.
959 kes Implement mkpath.c to replace old FSF makepath.c
961 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
963 Release Version 2.2.1
965 kes Update POTFILES.in
966 kes Cleanup a few underquoted AC_DEFUNs in configure
967 kes Apply patch from Martin Simmons that adds a test for va_copy to
970 kes Fix bug #921 by increasing the number of tries to create a new volume
972 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
973 can be called multiple times. Implement a version for machines
974 without va_copy() that gets a big buffer.
976 kes Integrate more portable zone offset code into bsmtp.c
977 Submitted by Attila Fülöp.
979 kes Fix bad SD->FD return status reported by
980 (James Harper) <james.harper@bendigoit.com.au>
981 ebl Fix a bug in read_close_session which return random status
982 thanks to James Harper
984 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
985 and directory names during restore of single file/directories.
986 kes Add sanity checks to .sql command when string is empty. Hopefully
987 that will resolve Dirks Director crash.
989 kes Apply patch submitted by Martin Simmons that corrects a seg fault
990 in the bsmtp chat subroutine when debug is >= 10.
992 kes Fix Director crash when running bat SQL queries.
993 kes Add David's notes on Item 8: Copy pools.
995 kes Rework projects file to be current and ready for a vote.
996 kes Enhance lex scanner error message.
998 kes Tweak LICENSE file to mention BSD code.
999 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1000 if specified on the ./configure.
1001 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1002 This class is intended to allow us to open a second bsock to the
1003 Director while in the restore subdialog.
1005 kes Fix configure to create bat Makefile before creating dependencies.
1006 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1007 kes Add a tooltip to the tray monitor.
1008 dvl Set the Director's PID file before dropping privs. This fixes
1011 kes Update AUTHORs file
1012 kes Increase the default max concurrent jobs to 20 in FD and SD to
1013 correspond with the default .conf files.
1014 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1015 some different, of the same file created by RN when porting the
1017 kes Rearrange some of the Win32 directories and the placement of the files
1019 kes Set DEVELOPER flag in version.h
1021 ========================================================================
1022 Release Version 2.2.0
1024 kes Apply a second doc patch from Marc.
1025 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1026 improves the tips section that discusses how to setup multiple
1029 kes Update bat README file.
1030 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1031 corrects a typo in the Recycle status check in db_find_next_volume().
1032 This will probably fix a number of annoying problems with multiple
1034 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1035 bnet calls -- no functionality change.
1037 kes Modify the Verify output to specify if files are missing on
1038 the Volume(s) or disk. Fixes confusion in bug #916.
1039 kes When more than one Volume is read in a migration job, the last
1040 Volume bytes reported are from the last read volume rather than
1041 the last written volume. Fixed. This fixes bug #910.
1042 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1043 It previously printed New Recyle flag is: no. This fixes bug
1046 kes Correct seg fault when switching tape drives during restore.
1047 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1048 be used until after 2.2.0 release.
1050 kes Remove fnmatch() in SD that permitted wild card specifications.
1051 This fixes bug #914.
1053 kes Fix %g in filename returned by SQL for browse tree reported by
1055 kes Fix configure so that it puts config.out in the cwd rather than
1057 kes Attempt to fix the locking problem reported by Eric in bug #906.
1058 kes Make berrno class to leave errno unchanged after constructor call.
1059 kes Make bnet_server use the heap rather than the stack to allocate
1060 its socket fd pointers to avoid a crash at termination. Problem
1061 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1063 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1064 and putting it in depkgs-qt along with Qt4.3.
1066 kes Rework code in acquire.c that switches drives for reading when
1067 the Media Type does not match. This should fix bug #906
1069 ebl Fix a director segfault during job setup #907
1070 kes Correct seg fault in postgresql when first operation returns no
1071 rows. Fixes Dirks File browser problem seg fault with bat.
1073 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1074 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1077 kes Implement PopUp YES/NO dialog for bat.
1079 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1081 kes Correct RunScript to terminate job in FD on failure.
1082 kes Change abort_on_error and AbortJobOnError to fail_on_error
1083 and FailJobOnError in RunScripts.
1084 kes Minor tweaks of code formating in RunScripts, principally to
1085 avoid depassing 80 columns.
1087 kes Eliminate one #ifdef Win32 in bsmtp
1088 kes Implement grow tool to grow a file for testing very large databases.
1089 kes Add big-vol-test to test Bacula seeking with > 5GB.
1092 kes Modify find_next_volume() to return all values in Media record.
1093 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1097 kes Update Release notes
1099 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1100 Warning, in previous beta version, all media get from scratch keep their
1103 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1104 This should fix bug #842. Made a note to look at removing the temp
1105 files at the end of the install.
1106 kes Add ability to mount and unmount a file device providing it is
1107 marked as being removable and has the appropriate mount and unmount
1108 commands defined in the Device resource. This fixes bug #830.
1109 kes When applying a storage override, release all previous storage
1110 definitions rather than just prepending the new storage.
1111 This should prevent a good deal of confusion.
1113 kes Implement ./configure search for qwt libraries.
1115 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1116 Win32 FD. This should fix bug #893.
1117 kes Remove an unnecessary beep in Win32 init code.
1118 kes Update copyright dates in Win32 executable about boxes.
1119 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1120 code with a BSD getopt.c and getopt.h.
1121 kes Remove sched.h from the Win32 compat directory -- not used.
1122 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1123 need to shut it down, do it through the services panel or the command
1125 kes Remove some inappropriate Bacula FSFE copyrights.
1126 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1127 kes Fix regress config non-portable test as pointed out by
1128 Florian Heigl <florian.heigl@gmail.com>
1129 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1130 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1132 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1133 Reported by Frank Sweetser.
1137 kes Fix client-only build.
1138 kes Integrate client-only fixes for bsys (initgroups) and conio from
1139 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1140 kes Make arguments to get_scratch_volume() in same order as other
1142 kes Rework the prune_volumes() subroutine so that after purging and
1143 no volume found in desired pool, it will check for a scratch
1144 volume. This prevents recycling the whole scratch pool.
1145 kes Add code to status storage to print boffset_t (largefile support).
1147 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1148 kes You now need a --with-qwt=<dir> to be able to build bat.
1149 kes Update src/win32/cats/bacula_cats.def to include the new
1150 db_get_query_dbids() call on Win32.
1152 kes Correct a problem when selecting a scratch volume and moving
1153 it to another pool that lost some columns.
1154 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1155 kes Enhance Autochanger error messages to include Volume and device name.
1156 kes Rework prune_volumes() code to take account of InChanger flag,
1157 and to handle recycling volumes going to the Scratch pool and
1158 current pool because the RecyclePool directive.
1159 kes Implement a better and more efficient db_get_query_dbids() to
1160 handle creating and passing back a list of DBIds.
1164 kes Start work on new more efficient DBId subroutine. First use
1165 will be for recycling volume to Scratch inchanger.
1166 kes Increase number of JobIds in pruning from 1000 to 10000.
1167 This to be replaced by above routine.
1168 kes Begin implementation of building Qt4 on Win32.
1169 kes Correct typo in fix I added for bad TLS shutdown.
1170 kes Pull 2.0.3 patches into patches directory.
1171 kes Update Release notes. Include qt-console in line count.
1172 kes Update Projects file.
1174 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1175 bug in migration code where a job that spanned two volumes
1178 kes Implement new BST_DESPOOLING blocked state. Change from locking
1179 during despooling in SD to blocking. This means that other threads
1180 can work with the device structure, in particular the reservations
1181 system while despooling.
1183 kes Fix return in reservation message queue that missed clearing
1184 the jcr lock (implemented 26Jun07 below).
1185 kes Rename a number of dev methods to make locking function names
1187 kes Document locking in lock.c. Move lock structures to new file
1190 kes Move reservations message lock to lock jcr only this
1192 kes Move main SD locking code into lock.c (new file).
1193 kes Update Win32 build to include lock.c
1197 kes Dirk committed the qwt library code for drawing graphs in bat.
1198 kes Tweak install of qwt so that it is integrated with ./configure.
1200 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1201 out by Eric (my typo).
1202 ebl Fix configure.in to get batch mode enable
1203 kes Return correct string from authenticate.cpp in bat when connecting
1205 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1206 spurious line drops when using TLS.
1207 kes Do not file reparse points when restoring a file that already
1210 kes Implement Windows reparse points -- similar to directories, but
1211 we do not descend into it. This is a first cut. They seem to
1212 be backed up, but restore is not yet tested.
1213 kes Remove restore_blocking in tls code when shutting a socket to leave
1214 it in blocking mode. Hopefully this will fix the encryption bug
1215 reported by Frank Sweetser.
1216 kes When opening a file for backup, tell the OS that we are going to
1217 read it sequentially -- optimization.
1218 kes Change variable names in authenticate_director() to not conflict
1219 with member names in bat. Caused great confusion with compiler,
1222 kes Queue openssl error messages in case of comm problem.
1223 kes Do shutdown() call if socket terminated.
1224 kes Remove some duplicated code in tls.c
1225 kes Move more of the bsock member variables into private and access
1227 kes Add Frank Sweetser's tls-test to the regression suite.
1229 kes Add Swedish sv.po file
1231 kes Don't print clock skew message in FD if less than 3 seconds diff.
1232 kes Add a bit of VSS info to status client.
1233 kes Implement a first cut of Vista VSS, using Win2003 code.
1235 Release: 2.1.20 beta
1237 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1238 loaded tape but uses first drive).
1239 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1240 This was indeed a Win32 issue.
1242 kes Simplify search of autochanger for in-use Volume.
1243 kes Fix exit condition of check for in-use volume. kes Remove
1244 inappropriate my_postgresql_free_result() in db_close()
1246 kes Fix bad return in FD when encryption signature not found.
1247 Probably caused a crash.
1248 kes Inhibit missing encryption signature error messages for
1249 file types where no signature computed.
1250 kes Correct inverted check on autochanger in reservation system.
1251 kes Tweak debug code in autochanger reservation.
1253 kes Add some additional locking in the cats directory in subroutines
1254 that modify packet variables called from batch insert.
1255 kes Rework how dcrs are allocated. new_dcr() can now be called
1256 with an existing pointer, and it will simply clean it up.
1257 This allows the reservation system to test various different
1258 devices, and will permit easy device changes.
1259 kes A bunch of changes all over to handle new new_dcr() calling
1261 kes Work more on the Volume management in the SD. Remember Volumes
1262 for tape drives and for autochangers (even virtual disk changers).
1263 kes When looking at the Volume list to reserve a drive, handle
1264 autochanger names correctly by interating through the changer
1265 devices. Also call the Director to see if a Volume is suitable
1266 for the current job.
1267 kes Fix some bugs in bscan. Make sure all media records are written.
1268 Make sure that valid JobMedia records are written for disk files.
1269 Previously they were completely wrong.
1270 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1271 that the URLs don't change and so that the developers will all
1272 work off the same copy. Rebuild from scrach.
1273 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1275 Release: 2.1.18 beta
1277 kes Fix seg fault in FD from incorrect digest size.
1278 kes Fix argument to non-OpenSSL crypto.c subroutine.
1280 Release: 2.1.16 beta
1282 kes Remove a few malloc()s from the encryption code.
1283 kes Use the class calls to bsock in filed/backup.c and restore.c in
1284 place of the old bnet_xxx code.
1285 kes Implement code that does an on the fly calculation of the
1286 signing digest during restore of encrypted files. It makes
1287 a best guess at the algorithm, and if it is not correct, will
1288 then revert to the old code which reads the file after it is
1290 kes Implement at least one missing crypto stream in stream_to_ascii()
1291 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1292 #877 where a reload with bad syntax causes Dir to exit.
1294 Cut: 2.1.14 beta (not released)
1296 kes Do not free a volume on a tape drive until another volume is
1297 mounted and read, or the autochanger unloads the volume.
1298 This should help the SD re-use volumes that are already mounted,
1299 and should fix bug #886.
1300 kes Apply patch from user brettedgar that allows gnome2-console include
1301 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1302 kes Apply patch from Lucien Weller that fixes day of week calculation
1303 because of DST flag problem. Fixes bug #887.
1305 kes Move find_next_appendable_volume() to after acquiring a valid device
1306 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1308 kes Unable to reproduce bug 872. However added additional testing for
1310 kes Bug #874 resolved by documenting SQLite limitations.
1311 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1312 kes Bug #881 resolved by removing typo in mtx-changer script.
1313 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1314 approval. Added a link to the wiki on the web page, and implemented
1315 a backup from http://paramount.ind.wpi.edu
1317 kes Fix update allfrompool to pass pool name.
1319 kes Convert to pure GPL v2 license.
1320 kes Fix sscanf problems reported by Peter Buschman that caused
1321 a bus error on Solaris.
1322 kes Rework (simplify) the select prompt in bat.
1323 kes Move get_jobid_from_tid() into lib and create a
1325 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1326 should definitely fix the problem of lost error messages in the
1328 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1329 kes Eliminate tcpd.h from the project. Enclose the #include from the
1330 library with extern C ...
1331 kes Add print of signal name when a signal is trapped.
1333 Release: 2.1.12 beta
1335 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1337 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1338 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1339 makes SQLit3 run 30 times faster, though a bit less safe.
1340 kes Implement --with-batch-insert in configure and detection of thread
1341 safe libraries. It is on by default, but turned off if no thread
1342 safe library (e.g. SQLite 2) is available.
1344 kes Fix Bacula PostgreSQL buffer overruns.
1345 kes Do better checking for NULL results returned from PostgreSQL;
1346 implement retry for failed queries; clear results buffer after
1347 failed query. Hopefully this will correct the PostgreSQL failures.
1349 kes Implement algorithm to handle only one appendable volume with
1350 Prefer Mounted Volumes = no.
1351 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1352 returned from a query.
1353 kes Make volume lock recursive.
1354 kes Implement an additional volume reservation algorithm that
1355 starts by considering all reserved volumes then uses the
1356 old brute force algorithm of searching the resources to
1357 find a suitable device.
1358 kes Add new reservations debug code and refine the old code.
1359 kes Update the win32/dll/bacula.defs file.
1361 kes Tweak reservations algorithm to permit a few more cases, i.e.
1362 volume reserved, but on different drive, ...
1363 kes Enhance SD status to include Pool and Media Type for drive in a
1364 more readable format (a bit longer).
1365 kes Fix PostgreSQL double free.
1367 kes Minor refactoring of restore decryption code.
1368 kes Add code to smartall.c to detect double free of a buffer.
1370 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1371 so that bsmtp will create a correct email address (mailbox only).
1372 kes Modify 'memory' command so that the buffers are listed as 'In use'
1373 to avoid confusion with Orphaned buffers.
1374 kes I reworked the OpenSSL include/lib flags to be handled in
1375 the standard Bacula way, which should fix bug #863 concerning
1376 non-standard OpenSSL libraries.
1378 kes Implement Help Browser window for bat.
1379 kes Fix reload bug that reset StorageId to zero.
1381 kes Fix TLS #ifdefing when TLS turned off.
1382 kes Ensure that when labelling a tape with Slot=0 that InChanger
1384 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1386 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1387 add DISTINCT (required by PostgreSQL).
1388 kes Implement BSOCK authenticate_director() method. Eventually will
1389 authenicate all daemons.
1390 kes Move several more functions into the BSOCK class.
1392 kes Add code to tell the OS that we no longer need a cached
1393 file that we were reading. In findlib/bfile.c. Also,
1394 only cache files that we are reading. Thanks to
1395 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1396 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1397 kes Implement script to automatically generate cats and dll .def
1398 files for Win32 dll.
1399 kes Update README.mingw32 to include new .def file generation.
1400 kes Correct typo in UTF-8 error message as reported by:
1401 jhernandez <julianhernandez@gmail.com>
1402 kes Add additional sm_check() code on debug level 1.
1403 kes Set default debug level to 1.
1404 kes Trap SIGABRT in attempt to get traceback.
1406 kes Reduce bat connect timeout from 30 to 15 seconds.
1407 kes More restructuring and implementing BSOCK class in place of
1409 kes Remove a few unnecessary malloc() tests in crypto code.
1410 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1411 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1412 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1414 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1416 kes Fix Verify InitCatalog. The attributes were not pointing to the
1417 correct saved location.
1418 kes Implement message callback so that GUI is sure to get all
1419 daemon messages. Currently displayed in a dialog in bat.
1420 kes Ignore SIGUSR2 (Bacula timer) in bat.
1421 kes Apply regress patch from bug #859 to allow regress to work
1422 with Solaris compiler.
1424 kes Begin adding TLS support to bat.
1425 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1426 clean up lex.c and make it more readable.
1428 kes Move more bnet functions into the BSOCK class.
1429 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1430 kes Complete change of berrno strerror() method to bstrerror()
1432 Release: 2.1.10 beta
1434 kes Cleanup incorrect email addresses in bsmtp.
1435 kes Make bat display initial messages rather than discard them.
1437 kes First cut of adding .mod to the run command.
1438 kes Implement auto display of messages in bat.
1439 kes Enhanced preferences to allow all Bacula output to be
1442 kes Try to make bsmtp date routines more generic.
1443 kes Fixed bug #856 autochanger documentation.
1444 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1445 kes Add new cats entry point so Win32 builds.
1447 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1449 kes Do better checking for the MySQL 64 bit libraries looking for both
1450 .a and .so libraries.
1451 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1452 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1453 kes Require the thread safe version of MySQL during configure. Thanks
1454 to Andre Noll for pointing this out.
1455 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1456 continuing in migration code.
1457 kes Apply implementation of tray-monitor font derived from gnome-console
1458 submitted by Andreas Piesk <a.piesk@gmx.net>
1460 kes Eliminate important memory loss in SQLite
1461 kes Fixed the batch insert MySQL thread specific data that was not
1462 being freed. See cats/mysql.c:db_thread_cleanup().
1463 kes Fix restore before command.
1464 kes Convert old hdr.name to name() in a few places.
1465 kes Implement update jobid command.
1466 kes Return all time_t dates in db_get_job_record()
1467 kes Stop watchdog in SD earlier.
1468 kes Put Pool just after Storage in please mount message.
1469 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1472 kes Update the po files.
1473 kes Fix Verify InitCatalog by making it cache attributes.
1475 kes Change name bacula-bat to bat for man 1 page to correspond to
1477 kes Check for client and store NULL pointers in status command. This
1479 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1480 kes Fix sign extended editing of %p.
1481 kes Clean out a little old #ifdefing in cats/mysql.c
1483 kes If time diff between DIR and FD is more than 600 seconds convert
1484 INFO message to WARNING.
1485 kes Implement heap size display in status for all daemons.
1486 kes Attempt to fix MySQL db open memory loss (not successfull).
1487 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1488 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1489 Query. This looks like a MySQL but but by doing extra releases,
1490 the memory goes away. This should fix bug #847.
1492 kes When backup fails, cancel SD before waiting for sd termination.
1493 kes If SD is waiting for FD to connect during cancel, wake up the
1495 kes Fix fsf code so that errno is correctly reported.
1496 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1498 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1499 so that Bacula doesn't later stumble into a seg fault.
1500 kes Use the term Restore Client in the restore Job report.
1501 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1502 the original job's FileSetId.
1503 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1504 spooling in migration jobs. Not yet tested.
1505 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1506 reading conf file from a pipe. However, do it with open_bpipe()
1507 rather than popen. Not yet tested.
1509 kes Fix an ugly bug where the VolCatBytes were getting updated
1511 kes Implement bconsole memory command that prints current memory
1512 usage, plus smartalloc dump.
1513 kes Clarify some error messages in backup, admin, and migrate.
1514 kes Shrink label dialog to smaller size.
1515 kes Invert Cancel OK buttons on restore to be OK Cancel.
1516 kes More strerror() to bstrerror() conversions.
1518 kes Start implementing bstrerror() in place of strerror().
1519 kes Stripping path -- seems to work.
1521 kes Prevent door and port files from being restored (mostly
1523 kes Free an unreleased buffer in compat code.
1524 kes Change console Job name from *Console* to -Console- to eliminate
1525 Win32 filename problems. Put Win32 path separator when creating
1526 Console file. This fixes bug #846.
1527 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1529 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1531 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1532 to force Win32 error message.
1534 kes First cut strip path. The data should be passed to the FD,
1535 but nothing is done with it yet.
1536 kes Enhance the digest and signature routines in the crypto
1537 library to accept a JCR and to use it to print error messages
1538 so that they will go in the Job report rather than the daemon's
1540 kes Simplify some of the verify signature code.
1541 kes Simplify a few of the alternative returns in the signature
1544 ebl Use only POSIX regex instead of GNU regex in breg.c for
1545 File relocation. It fix broken freebsd compilation.
1546 kes Convert all other Dir files to use new ua class message
1548 kes Tentative fix for missing digest signature in bug 807.
1549 kes Correct handle problem in new win32_ftruncate routine.
1550 kes Convert ua_purge.c and ua_update.c to use new ua class
1551 message routines for bat.
1553 kes Correct incorrect installation of LICENSE in Win32 installer.
1554 kes Display LICENSE at the beginning of the Win32 install.
1555 kes Attempt to correct the need for the png files to be installed
1557 kes Reapply my bat.conf install script in qt-console. I think I
1558 editted bat.pro instead of bat.pro.in and it was lost.
1559 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1560 the /var/lock/subsys for subsysdir. Also corrects typos in the
1563 kes First cut update job.
1564 kes Correct configure to include qmake of src/qt-console directory.
1566 kes Make restore job yes/mod/no print in one command so GUI works.
1567 kes First cut implementing backup and restore client.
1568 kes Correct editing in Verify output that caused a seg fault.
1570 kes Insure that bat.conf is not overwritten during installation.
1571 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1572 while I was implementing migration in March 2006 !
1574 ebl Cleanup file relocation, using char *RegexWhere instead of
1575 char *where + bool where_use_regexp
1576 kes Update some manpages and add bat manpage.
1577 kes Make a first cut at converting bacula.spec.in for bwx-console
1579 kes Apply patch from John Goerzen to add hostname as fourth argument
1580 to make_catalog_backup script.
1581 kes Fix typos I introduced into bsmtp.c
1582 kes Make pm_strxxx() routines handle input of NULL pointer. This
1583 is to protect from NULL pointers returned from SQL databases.
1584 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1585 kes Add more debug to FIFO code -- fix fifo regression test.
1587 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1588 kes Add thread timer to bnet_connect() to break from OS if wait time
1591 kes Update Win32 build to include new files, new symbols, and
1593 kes Implement socket level heartbeat (tcp_keepidle)
1594 ebl Commit File relocation patch
1595 kes Make bat have 'make install' target.
1596 kes Warn during install if old gnome-console binary found.
1597 kes Warn during install if old wx-console binary found.
1598 kes Add -8 option to bsmtp command line to add content type utf-8.
1599 Fixes bug #809. (Character coding problem in bsmtp).
1600 kes If < is found in target (from, to, cc) then do not enclose the
1601 target in < > in bsmtp. Fixes bug #772 (malformed address).
1602 kes When printing certain items in dbcheck, stop after 300000.
1603 Fixes bug #822. (dbcheck loops).
1604 kes Incorrect status in Dir after waiting for mount with poll set.
1607 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1609 kes Print waiting to reserve a device every 5 mins.
1611 kes Don't call close_part in label.c if tape and relabel.
1612 kes Don't free volume if busy in close() -- should help with
1614 ebl Fix #824 RunScript bug (After script could be execute twice)
1615 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1616 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1617 Add a regression script to test RunScript
1619 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1622 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1623 deprecated. No additional bugs will be fixed, and they will be dropped
1624 in a future release (probably 2.4.0).
1625 kes Change name of wx-console to bwx-console to make it more Bacula
1627 kes Change the name of gnome-console to bgnome-console to make it
1630 kes Some time in March, a Feature Request with patch from Jorj Bauer
1631 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1633 The ability for the director to validate a Client (FD) CN against
1634 an arbitrary set of patterns rather than the hostname, with
1635 A new 'TLS Allowed CN' set of directives which are implemented
1636 in the Client resource. Then pattern matching is used in place
1637 of hostname matching against the Certificate's CN. As an example, we
1638 have certificates which (a) use a local CA, and (b) have a CN of the
1640 kes Add new/changed entry points to Win32 build
1641 kes Create unaccepted-projects for projects that are not accepted.
1642 kes Simplify locking in the reservations system.
1643 kes Add more debug code in reservations.
1644 kes Make sure error condition on reserving a volume is handled correctly.
1645 kes Correct handling of volume_in_use.
1646 kes Correct handling of initializing a device.
1647 kes Move handling of broadcasting releasing a device into release_device().
1648 kes Correct attaching dcr to dev so that it is only done if device
1649 is properly initiated.
1651 kes Locking debug level tweaks in SD.
1652 kes Tweak new Volume code.
1654 kes Add exec external-command [wait-seconds] to bconsole. This
1655 executes the external-command. Note! normally external-command
1656 should be enclosed in double quotes.
1657 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1658 it should normally be off in a production system.
1660 kes Implement die command for SD so that we can force it to dump.
1661 kes Implement SD lock debug code.
1662 kes Implement new algorithm for keeping Volume list in SD. It
1663 is now owned by the device.
1665 kes Implement new code for freeing in use volumes that should
1666 resolve if not all, some of the problems of multiple drive
1667 tape conflicts described in bug 801.
1669 kes Fix gui/bacula-web/images files in svn.
1670 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1672 ebl Fix a bug in batch mode (in string escape)
1673 kes Correct migration prune SQL typo that crept in in a
1674 recent 2.1.x change.
1676 kes Move bnet_despool() into class in bsock.c
1677 kes Modify job report to include director name and Build OS.
1678 kes Move drop root privilege and check_catalog() before fork.
1679 kes Add update database scripts (version 9 to 10) to updatedb directory.
1681 ebl Check size and age of each file after its backup to see if
1682 it has changed during backup, if 'checkfilechanges' is set.
1683 The FD will do an extra check (stat(2)) after
1684 each file backup. mtime, ctime and size are compared with
1685 'before backup' information. If time or size mismatch, an
1686 error message will be generated. You must upgrade FD to use it.
1688 kes Make database name and user configurable
1689 --with-db-name=xxx --with-db-user=xxx
1690 kes Add back database type to message.c for debugging.
1692 kes Implement dir_sql() which issues an SQL query.
1693 kes Modify bat medialist to use dir_sql() and do some minor C++
1694 formatting as well as eliminating a number of pointers, simplifing
1697 kes Fix some of the mtx-changer grep commands for tape label readers.
1698 kes Convert a number of bsendmsg into the appropriate send/warning/error
1699 message class calls.
1700 kes Suppress the using database message in the .sql command.
1701 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1703 kes Add context menu for floating a window.
1704 kes Some minor cleanup and name changes in qt-console
1705 kes Add doing mt setblk 0 in Win32 mtx-changer.
1706 kes Apply Martin's bug fix to move definition of ENODATA for
1708 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1709 sqlite2 and sqlite3.
1711 kes More pruning cleanup.
1712 kes Turn on wait_for_drive by default in mtx-changer.
1713 kes Turn on Batch insert code by default as it now passes regression.
1714 kes Add ./configure --enable-bat to enable building of Bat.
1715 No install yet though.
1717 kes Implement a new .sql command for bat.
1718 kes Implement code to turn off pruning in obtaining the next volume.
1719 Pruning is turned off for the status dir command, but turned on
1720 for SD requests and for the list nextvolume command.
1722 kes Correct Qmsg() that was not updated correctly when committing a
1723 previous change (probably the recent TLS patch).
1725 kes Write new subroutine is_volume_purged() that explicitly checks
1726 if the Volume is purged, and if so marks it as such. This should
1727 resolve problems reported about needing to mount twice to recycle
1729 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1730 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1731 amount of duplicated code.
1732 kes Do volume pruning only for the Media Type desired (reduces pruning time
1733 if multiple Media Types are in the same pool).
1734 kes Implement more detailed info in the Job report for the Bacula version
1736 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1738 ebl Add bbatch tool to bench database and insert mode.
1739 Fix sql quote stuff in batch mode
1740 Fix sql stuff for mysql
1742 kes Correct problems with am/pm scheduling. Fixes bug #808.
1743 kes Implement new prunning code that prunes up to 1000 jobs at
1744 the same time. The same technique can be applied to a number
1745 of other prune/purge subroutines.
1746 kes Add an insanity check when starting a new tape job to ensure
1747 that the tape position has not been changed. If so fail the
1749 kes Fix Win32 build for dlls to add the folllowing:
1750 src/lib/bsock.c -- new file with new entry points
1751 src/lib/dlist.c -- new entry points
1752 src/cats/sql_create.c -- new entry point
1753 src/cats/sql_cmds.c -- new DATA item exported
1755 ebl batch mode cleanup bscan-test is ok now.
1756 kes Implement SD code to check length of disk volume before appending.
1758 kes Correct return status on db_batch... routines.
1759 kes Add call to db_write_batch_file_records() to migration code.
1760 ebl Fix AfterJob timing
1761 kes Move the checking of the database in initializion of the Director
1762 to after we drop privileges. This avoids the need for both root
1763 and bacula access to the DB.
1764 kes Correct a misplaced variable definition in src/filed/backup.c
1765 kes Correct how the new batch insert db_create_attributes_record()
1766 uses the arguments. Caused a seg fault in bscan.
1767 kes Implement lock() and unlock() methods in DEVICE class.
1768 Implement block() and set_block(xx) methods in DEVICE class.
1769 kes Modify bnet_connect() so that it uses time() to check for the
1770 wait time expiring (on some OSes, some system calls may not
1771 return immediately).
1772 kes Modify Verify to obtain the previous JobId when it is actually
1773 running rather than at schedule time (as it was in 1.38.x).
1774 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1776 kes When checking pid in pid file, continue running if the pid is
1777 the same as ours. This occurs on IRIX after a system crash.
1780 kes Extend new GUI API.
1781 kes Make the ua structure a class, and implement send_msg(),
1782 error_msg(), warning_msg(), and info_msg().
1784 kes Apply fix from for building wx-console on the Mac from
1786 kes Implement new select mechanism for GUI programs.
1787 kes Reorganize initialization of stackedWidgets in bat.
1789 kes Add updated nagios plugin supplied by Christian Masopust.
1791 kes More bat implementation.
1792 kes File migrate bug with Pool Occupancy using mediaid instead
1793 of jobids. Fixes bug #795.
1794 kes Fix orphaned buffers in filed backup and verify due to
1795 crypto buffers not freed during errors. Fixes bug #789.
1796 kes Extend new GUI api code to tree commands.
1797 kes Ensure that tree and dot commands check console ACLs.
1798 kes Permit marking directory with trailing slash.
1799 kes Allow 20 console connections (instead of only 10).
1801 kes Add smartctl call to bacula-sd.conf as an example of getting
1804 kes Modify jobq.c to let simultaneous restore jobs run. This may
1805 cause them to fail if they cannot get a drive.
1806 kes Add Client Connect Wait to Storage daemon to permit users to
1807 modify the time the SD waits for a FD connection.
1809 kes Correct virtual changer check which was backwards. This caused
1810 volumes to be unloaded into slots already occupied.
1812 kes Apply Command ACL filter to JobId list in restore command.
1813 kes Correct typeo in var.c patch.
1815 kes Don't let Bacula prune File or Job records for the current Job.
1816 kes Fix variable substitution pad + inc bug reported (with patch)
1819 kes Correct SQLite log table index as reported by Luca Berra.
1821 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1823 kes Begin implementing new comm signals for API.
1824 kes Fix a few places in lib/message.c where the open fd may
1826 kes Continue implementing lib/bsock.c (real class). Make jcr,
1827 who, host, and port private. There are new methods to access
1828 them for non-class use. This required touching a number of files.
1830 kes Add LANG=C to autoconf/randpass so it works with languages other
1831 than English. Fixes bug #788.
1833 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1835 You will not be able to generate Include/Exclude list any more.
1836 It will be fixed soon.
1837 If you want to use this, you can apply
1838 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1840 kes Restore of sockets created false error messages because Bacula
1841 no longer restores sockets, but the code was still trying to
1842 set the attributes on a non-existent file. Reported by a user.
1843 ebl finish RecyclePool feature
1844 Media will takes Pool.RecyclePool
1845 when moving from Scratch to a Pool or when user will do
1846 update volume=xxx frompool
1847 To use it, add RecyclePool = aPool to your Pool resource
1850 RecyclePool = Scratch
1854 kes Expand new BSOCK class adding signal() and new BNET signals.
1855 kes Begin enhancing the dot commands adding a new API function
1856 that returns more information and will make it easier
1857 to interface to the Director from a program.
1859 kes Make DEVICE fd private. Its new name is m_fd, and can be
1860 obtained with dev->fd() outside the class. This is the
1861 first of many DEVICE members to be made private.
1862 kes Implement Michael Renner's idea on having a virtual disk
1863 changer. I made some minor modifications (e.g. I did not
1864 implement the Virtual Changer directive, but simply set
1865 the Changer Command to an empty string.
1867 kes Implement a BSOCK send() method that writes the whole record
1868 in a single write() request rather than in two.
1869 ebl add update volume=xxx recyclepool=yyyy
1870 volume takes recyclepool from pool when using update volume=xxx from pool
1872 kes Fix encryption deblocking bug, which caused some restored files
1873 to be truncated. This fixes bug #763.
1874 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1875 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1877 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1878 ebl Use btime_t instead of uint64_t in media patch.
1880 kes Optimize the use of the database a bit in the Status dir command.
1881 Only open it when needed, ensure that if any previous database
1882 was opened, it is closed.
1884 kes Correct VolCatBytes bug from media patch.
1885 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1886 in the case of orphaned records.
1887 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1888 and File records in 300K chunks to be more efficient. This
1889 idea came from Juan Luis Frances (if I remember right).
1890 kes Apply Eric's scratch patch that moves a purged Volume to
1891 the RecyclePool. Question: how is RecyclePool set? what
1892 happens to the ScratchPool?
1893 kes Apply Eric's media patch that collects read/write media
1894 times as well as byte counts. This patch requires a
1895 simultaneous upgrade of the DIR and SD. Note, there
1896 should be some way to turn off timing. I'm not sure
1897 times are in Bacula units.
1898 kes Apply Eric's batch-insert patch.
1900 kes Update projects list.
1902 kes Implement Include/Exclude file lists in FD as dlists using
1903 the new dlistString class. This permits efficiently having
1904 large include/exclude lists and completes project Item 25.
1905 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1906 console is authorized to cancel the job. This fixes bug
1908 kes Modify SD so that the VolCatJobs medium record is updated
1909 at the beginning of a Job rather than the end. This
1910 fixes bug #775 where exceeding MaxVolJobs caused jobs
1912 kes Added a mutex around getting and setting Volume information
1913 so that multiple simultaneous jobs will single thread.
1915 Switch to using Subversion
1916 kes Remove src/pygtk-console/ from configure
1918 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1919 plus the entrypoints.
1920 kes Apply patch supplied that corrects debug print
1921 in canceling jobs for max run time. Supplied as
1922 part of bug #621, which was previously fixed.
1924 kes Test on job_canceled() and sd_msg_thread_done inside
1925 loop starting the message thread to avoid a race condition.
1927 kes Remove rl_catch_signal from console.c as it conflicted
1928 with the header definition. Fixes bug #765.
1929 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1931 kes Clarify some stored/acquire messages to indicate if the
1932 problem is with read or append.
1934 kes Fix memory leak with storage ids in cats/sql_get.c
1935 kes Terminate watchdog earlier to avoid reference to released
1936 memory -- reported by Jason Austin.
1937 kes Move closing the database from jobq.c to the director daemon
1938 termination routine. This fixes memory leaks for shadow jobs
1939 (i.e. migration jobs).
1940 kes Free up the unique jobid chain items in migrate.c. This fixes
1941 a memory leak problem.
1942 kes Convert some ugly looking for statements to use foreach_alist
1943 in findlib/find.c. This will facilitate converting the structures
1944 to use dlist (for large include/exclude lists).
1945 kes Fix a bug in the btree.c and btree.h routines, then rename them
1946 rblist and add them to be built in src/lib. Include some new
1947 methods written by Rudolf Cejka that make the code more readable
1948 (hides some of the ugly casting).
1949 kes Add set_next() and set_prev() methods which make the code much more
1950 readable. Also add a new dlistString class that facilitates storing
1951 strings in dlists. To be used in the large include/exclude lists.
1952 kes Make some trivial modifications to lib/tree.h that use rblist
1953 rather than dlist for storing the tree links. This was suggested
1954 by Rudolf Cejka. The result of this is that the restore tree now
1955 uses red-black binary trees rather than simple linked lists. This
1956 should give rather dramatic speed improvements for directories
1957 contining large numbers of directories/files (more than 10000).
1959 kes Fix maxruntime bug #621.
1961 ebl Implement the include JobID in spool file name project.
1962 kes Reorder projects file in order determined by Jan 2007 vote.
1963 kes Implement item #12 on project list -- quick release of FD by
1965 kes Fix open of SQLite3 db where user does not have write permission
1966 so that DIR does not crash. Fixes bug #761.
1968 kes Add back missing @ in Win32 Makefile.
1969 kes Change 'Device not configured to autolabel' from INFO
1971 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1972 which should restart an indefinite # of times.
1973 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1974 other DIR specifications.
1976 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1977 Fix path quoting in SQLite scripts.
1978 Fix problems with SHGetFolderPath.
1980 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1982 kes Fix Job restart on error bug that promotes an Inc to a Full
1983 backup. This should fix bug #755.
1984 kes Add qt-console and first cut of code.
1988 kes Fix Bacula->Documentation link on Win32 to point to index.html
1989 instead of bacula.html. Fixed bug #750.
1990 kes Return JobId in db_get_job_record() when JobId==0. This should
1992 kes Do not release source pointers when restarting a failed job.
1994 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1995 This *should* fix bug #747.
1996 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1999 kes Modify USTORE constructor to set an empty store_source string,
2000 and don't copy the store_source string in a cancel. Hopefully
2001 this will fix Arno's seg fault, bug #744.
2002 kes Add back code to disable conio in configure. Fixes bug #743.
2003 kes Correct the Options scanner in the FD to correctly handle
2004 SHA1 option, which was eating the next option. Reported by
2006 kes Add code to indicate when the SD is spooling, spool wait, and
2007 despooling as requested by Alan Brown.
2009 Version 2.0.0 released: 4 January 2007