1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
29 ebl Modify disk-changer to check if slot contains something before
32 ebl Fix vtape on win32 and debian.
33 ebl Fix autoselect patch (cause segfault).
35 ebl Fix autoselect option broken for a while. Fix #1089. Need some
36 work with StorageId to be able to use a particular drive in a
39 ebl Rename faketape to vtape.
40 ebl Update faketape driver.
42 ebl Modify faketape driver to avoid sparse file.
43 kes Add make clean of qt-source directory during ./configure
44 kes Store last block number written to tape in DEVICE and
45 use it for testing for correct last block on EOT.
47 Release Version 2.4.0:
51 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
54 kes Add create_postgresql_database.sql to Win32 installer. Should
55 fix problem reported by Juilio Monteiro.
56 kes Get correct slot when auto unloading a device. This fixes bug
59 kes Fix multiple media restore.
60 kes Make DEVICE Slot private and access it via a method.
61 Allows better control over when it is set and cleared.
62 kes Fix possible seg fault if SQL error.
64 kes Add Martin's fixes to argument scanning for the estimate
65 command. This fixes bug #1093.
66 kes Add debug code to SD.
67 kes Fix renaming a Volume, which used the wrong Volume name.
69 kes If operator has rewind tape, print warning, release tape and
70 try once more. If tape is positioned somewhere, something went
71 wrong, so mark the tape in error and try once more. Previously
72 this error was fatal, now it produces an error message.
73 kes Ensure correct volume name displayed during restore
74 kes Ensure that Volume is mounted for restore.
76 kes Fix a few more Coverity reported problems.
78 kes Apply Allan Black's status dir job count patch.
79 ebl Add information about IMPORT/EXPORT slots in mtx-script.
80 kes Enhance a couple of SD debug messages.
81 kes Tweak unload flag setting and ensure it is set during swap.
83 ebl Fix #1091 about bad output in estimate command.
85 kes Modify autochanger locking to attempt to avoid race
87 kes Make sure device not busy before doing label command.
88 kes Display open() errors except when polling. Previously too
89 many were suppressed. This should fix bug #1070.
90 kes Fix Win32 reparse points. Bacula will not recurse into any
91 reparse point directory, including mount points, unless the
92 directory is explicitly mentioned at the top level (same as
93 with Unix). A file that is linked to another file will be
94 backed up -- much as Unix does for hardlinked files.
97 kes Remove double quotes from ChangeLog and ReleaseNotes
98 kes Remove StorageId test when pruning and recycling (Eric's changes).
99 kes Remove old form of locking when getting volumes -- causes deadlock.
100 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
101 the name unique and to eliminate compile time error.
102 kes Add accurate.o to Win32 FD Makefile
104 kes Fix cats dll build on Win32 after db_update_job_end_record
105 calling sequence change.
106 ebl Switch to tokyo dbm instead of htable in accurate code
107 ebl Include tokyo dbm to bacula source tree
109 kes Fix buffer overruns detected by Coverity.
111 kes Tweak joblog display.
113 kes Implement --without-qwt
114 kes Fix layout of restore tree dialog
115 kes Add configure bat QWT libraries, so that bat can be built
116 with or without the QWT libaries.
118 ebl Add dummy tape driver for regression tests.
119 kes Make sure we unload the right slot when swapping.
121 kes Add debug times, reduce size of two-pool-changer test
123 ebl Tweak autoconf scripts for faketape
125 kes Improve SD reserve debug code.
126 kes Testing an improvement to free up volumes no longer in use.
128 kes Rework SD acquire for read to handle autochanger Volume
130 kes Implement regression that explicitly tests swapping a Volume
131 from one drive to another.
132 kes Enhance disk-changer to detect most error conditions.
133 kes Fix SD code so that it properly swaps a Volume between drives.
134 This fixes bug #1083.
136 kes Apply libdbi patch from Joao Freitas for regress and for
137 Bacula trunk. Regress now works with libdbi. Nice.
138 kes Apply .nobackup patch from bug #1077 submitted by
140 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
141 name into jobs cloned via the run directive.
143 kes Prevent a Volume that is being swapped from being freed from
144 the volume list. This will most likely fix, at least partially,
146 kes Fix strippath so that it does not get a buffer overrun and crash FD.
147 This fixes bug #1078.
148 kes Remove 50 millisec wait in SD that broke debugger.
149 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
150 that a job may run, counted from when the job was scheduled.
151 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
152 a job may block waiting for a resource, counted from when the job starts
153 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
154 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
155 that implements multiple commands per line in the console when using
156 readline. Modify the default to use a semicolon as the command separator.
158 ebl Fix SQL query in migration code.
159 ebl Make accurate mode with hash disk pass regression tests
161 ebl Implement first cut of accurate backup with hash disk.
163 kes Force unload of volume when wrong volume mounted in SD.
165 kes Fix bat seg fault at termination.
166 kes Add Bacula generated version to bat about box.
169 kes Experiment with allowing multiple read jobs.
170 kes Move final volume swapping code to DCR method and
171 call it from acquire_for_read().
172 kes When wrong volume is mounted during read, unload_autochanger.
174 kes Integrate the libdbi changes from Joao Henrique Freitas
176 kes Stop searching for Volumes in SD askdir if DIR returns the
177 same volume name twice in a row.
178 kes Close bat console windows first to eliminate error message
181 kes Tweak the swap Volume from one drive to another code so that
182 it now seems to work.
183 kes Resolve several problems with recycling that broke the new
184 code (these problems are in 2.2.9 as well).
185 kes Remove the volume lock when calling the sysop code.
186 kes Don't mark a reserved volume with no writers as unused otherwise
189 kes Rework class structures for VOLRES, DCR, and DEVICE to make
190 the method names a bit more logical, and for more logically
191 handling the responsibilities.
193 kes Remove redundant code in terminating the scheduler that just
194 causes a seg fault in many cases.
195 kes Cleanup releasing a volume and make it a DCR method.
196 kes Improve algorithm for detecting pre-reserved volume and
199 kes Tweak volume swapping code so it works.
200 kes Correct name overloading in mount.c
201 kes Replace released flag in VOLRES with reserved and add access
202 methods for the VOLRES class.
203 kes Prevent volume from being released while being swapped.
204 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
206 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
208 kes Refactor parts of stored/mount.c
210 ebl Add sanity checks for VolWriteTime and VolReadTime
211 ebl Take care of bad clock changes while computing VolWriteTime
212 and VolReadTime. This should fix or limit #1066
213 kes Correct error string numbers in dird/catreq.c
214 kes Restructure reserving, acquiring, and mounting volumes. Calls to
215 autochanger are deferred for mount.c -- simplifes the code.
217 kes Do not prune any running job. It just fails the job.
218 kes Lock the volumes when changing dev->reserved_device and marking
219 the volume unused otherwise the device can get reserved by
220 another job before the volume is released, thus blocking it.
222 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
223 kes Fix bug #1063, reuse of freed ptr in list nextvol.
224 kes Release regex compile buffer in filed/job.c
225 kes Add proper type of const char in sql_create.c
226 kes Turn off debug in daemon termination routines
227 kes Move free_volume_list() before devices are freed in stored.c
228 kes Fix reference to uninitalized stack variables in bregex.c.
229 This should correct bug #1067.
231 kes Fix possible seg fault in SD when freeing a volume entry.
233 kes Implement unload_dev() before swap device.
234 ebl Add statistics prunning with option and menu
235 kes Separate unload_dev() from unload_other_device() in autochanger.c
237 kes Apply patch from bug #1069 that corrects spurious error messages
238 when ACLs enabled on SGI but no ACL exists.
239 ebl Fix small segfault in bacula-sd when debug level is 500
240 kes Modify run_program() and run_program_full_output() to use
241 call by reference for the results string. This corrects a long
242 standing problem where the address of the string may be changed
243 in the subroutine but not in the calling program.
245 kes Re-enable code to remember last volume mounted on a non-tape
247 kes Add patch supplied in bug #1068 that fixes a SD crash when using
248 a Virtual autochanger.
249 kes Generate correct JobMedia records during spooling/despooling when
250 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
251 <tih@hamartun.priv.no> for excellent analysis and testing.
253 kes Tweak hash algorithm for htable using Martin Simmons idea
254 for doing a circular shift.
255 kes Remember what volume is in VTLs (previously turned off for
257 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
258 pointed out some problems in creating JobMedia records during
259 spooling with concurrent jobs. Fix the problem by updating the
260 start file position before despooling and generate a jobmedia
261 record at the end of despooling.
263 kes Fix handling of JobMedia records during spooling and when a
264 Volume is changed without actually writing data to the Volume.
266 kes Rework certain SD locking based on gdb tracebacks of deadlocks
267 sent by Eric. This code now uses only the volume_lock() rather
268 than the reservations lock when at EOM and acquiring a new
270 kes Ensure only one exit point in several subroutines.
272 kes Implement bsock code to permit locking. Use the new code in Verify
273 in the FD to prevent the heartbeat thread from disrupting the Verify
274 data sent to the Dir.
275 kes Modify SD locking to eliminate locking the reservations system from
276 outside the system. Use the volume lock when getting media data
277 and reserving a new volume at end of media.
278 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
279 when SD starts are not locked into place.
281 kes Fix error compiling runscript code on 64 bit machines.
282 kes Tweak Win32 mount point code.
283 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
284 cleared giving bad file estimate).
285 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
288 kes Keep Schedule run lists in order as suggested by
291 kes Implement autostart scripts for Debian.
292 ebl Implement upgrade catalog scripts.
294 ebl Apply jobstat patch for long term statistics. Have to implement
295 purge stats command and upgrade scripts.
296 kes Fix mtx-changer.in for broken Debian mt program.
298 kes Fix large number of JobMedia records reported by Eric Bollengier.
300 kes Apply doc fix from bug #1062.
301 kes Resolve crash and improper restore wx-console Win32 restore
302 GUI. Fixes bug #1065.
303 kes Update Win32 wxWidgets to latest version.
304 kes Attempt to do correct handling of Win32 mount points. Should
306 kes Fix Win32 FD backup/restore memory leak due to improper termination
307 of BackupRead/Write. This fixes bug# 1038.
309 ebl Reduce memory usage for accurate backup, working only with ctime
310 and mtime. (not all Lstat field)
311 About 40MB for my linux system (400.000 files)
313 kes Add dcr->reserved_volume flag that allows us to release a volume
314 even if it is not vol->released. This allows maxvol2 to work when
315 Volumes expire and we are already writing to the device (i.e. a
316 volume is pulled out from under us by another job terminating after
317 we reserve the drive).
319 ebl Permit multiple command/console per runscript definition.
320 RunScript { command = /bin/true ; command = /bin/false ... }
321 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
322 (restart an application) just after the VSS snapshot on windows.
323 kes Don't zap dcr values during release_volume() as they might
324 have the next Volume to be mounted.
325 kes Fix AIX prototype.
327 kes Second cut of drive switching during backup.
330 kes Update Win32 version of wxWidgets to most recent version.
331 kes Tweak Copy job details.
332 kes Rework dir_find_next_appendable_volume to make a bit more effort
333 to find a suitable volume before giving up.
335 kes Make ask_sysop_to_create... to return if waken from wait.
336 This helps get out of blocked conditions.
337 kes Experimental implementation of switch_device in reservations.
338 kes Implement FD version to allow easier protocol changes.
339 kes Add Plugin Options string -- not yet passed to FD.
340 kes Implement PluginOptions ACL.
342 kes Attempt to correct problems with restores with autochangers and
343 use counts going negative
344 kes Rework SD status command and implement API for bat. Implements
345 header, runing waitreservation, devices, volumes, spooling,
346 and terminated status keywords.
347 .status storage=xxx <keyword>
348 kes Clarify TLS error message by adding double quotes around name.
349 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
350 kes Pass jcr to tls routines so debug messages can be handled better.
351 kes Rework jobq resource allocation code, and possibly fix a bug
352 that caused reference counts to get out of sync.
354 kes Rename fd/dir plugin to use Bacula standard underscore.
355 kes Plugin work -- bring dir up to fd level.
356 kes Start implementation of VTL code
357 kes Fix Win32 build after adding new cats subroutine.
359 kes First cut at Duplicate Job implementation.
361 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
362 kes Start PluginOptions string, and refactor a bit of ua_run.c
363 ebl Apply Allan patch that permit to reset recyclepool.
365 kes Test patch -- possible fix or improvement for bug #1053
366 kes Refactor FD and SD status commands to permit new API code in
367 SD, and to fix Win32 build.
368 kes Win32 build is now working.
370 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
371 some ideas in patch from Scott Bailey.
372 kes Begin implementation of duplicate Job control.
373 kes Fix some of Win32 build after recent additions.
374 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
375 which causes the FD to detect whether or not the OS has the
376 honor no dump bit (*BSD systems), and if so, to skip backing up
377 any file with this bit set. The feature is enabled by setting
378 'honor no dump flag = yes' in the Options section of a FileSet.
380 kes Correct po warning message with datarootdir
381 kes Implement more code in dird.c to put configuration parsing in
382 a class rather than use globals.
383 kes Restructure SD status command for implementation of bat API
386 kes Suppress incorrect 'Will not descend from x into y' messages.
387 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
388 daemon globals used by parser.
389 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
391 kes Fix free of plugin_list when none exists.
393 ebl Apply accurate project patch.
395 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
396 on non-mempool object)
397 kes First cut of converting FD .status to work with bat API.
399 .status client=XXX header
400 .status client=XXX running
401 .status client=XXX terminated
402 kes Implement first cut of Copy Job.
403 kes Implement Catalog in Pool resource. It overrides catalog specified
404 in the Client resource.
406 kes Apply patch (with some difficulties) from Joao Henrique Freitas
407 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
409 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
410 ftruncate() actually works. In the case of some (cheap) NAS devices,
411 it does not, and so recycling NAS Volumes does not work. The code
412 simply unlink()s the file, then recreates it. This fixes bug #1011.
414 kes First incomplete cut of big malloc blocks for htable.
415 kes Tweak plugin code.
417 kes Plugin debug code + tweak a couple bat dialog layouts
419 kes Fix creating first JobMedia record during Migration to include
420 proper index. This caused slow restores of migrated jobs.
421 kes Temp fix to plugin name file_index.
422 kes Bacula backed up and restored a MySQL database.
424 kes Implement plugin restore.
425 kes Implement parsing of db_driver to give db_type index.
427 kes First cut of plugin restore code.
428 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
429 and do not strip paths on symbolic links.
430 kes Set catalog backup database and user name from values specified on
431 the ./configure line.
432 ebl Fix #1031 about wrong pool source information in job report.
435 kes Remove a redundant jcr argument to find_files, match_files, and
437 kes Implement '.status dir header|scheduled|running|terminated' that
438 prints the requested status section. With the exception of the
439 header, the other reports have fields separated by tabs (\t).
441 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
442 a resource embedded run command to find a since time if no explicit
443 since time was supplied on the command line.
444 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
445 that updates the state file at job termination time in addition to
446 when the daemon terminates.
448 kes First version where a plugin did a backup.
449 bpipe-fd.so created a backup file, wrote a test
450 string to it, and Bacua could restore this fabricated file.
452 kes Implement DB Driver = string for the DBI driver.
453 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
454 kes First cut of code for loading Win32 plugin dlls. Implement
455 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
456 and implement a dlfcn.h file based on opengroup's definitions of
459 kes First cut plugin directives.
461 kes Apply patch from bug #1049 to prevent stripping the path on a
463 kes Attempt to fix bug #1047 where stripping a path corrupts the
464 heap. Waiting for feedback.
465 kes Correct the Mount message not to suggest labeling a new tape
466 when doing a restore. Submitted by email by John Stoffel.
467 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
468 FD by using casting. Reported in bug #1042.
470 kes A bit of crypto cleanup. More later.
472 Release Version 2.2.8
474 kes Apply patch from Martin to correct bug #1040, bscan sets existing
476 kes Fixed important spelling error in doc -- bug #1045.
478 ebl Fix bextract to be able to extract non-portable Win32 data to
480 kes Move initialization of read/write res lock earlier in the code.
481 This fixes the crash with a null conf file. This fixes bug
483 kes Redefine CURES in lib/parse_conf to be URES and move it all
484 into lib/parse_conf.c -- this responds to bug #1042, but does
485 not fix it. The fix is not to compile with FORTIFY_SOURCE.
486 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
487 the trunk SVN. I don't think this was reported as a bug.
489 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
491 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
493 kes Add DataDespooling and DataCommitting status (committing is
494 the last despooling).
495 kes Finish implementation of new reservations code noted below.
497 kes Fix bsnprintf for float point numbers. I broke recently when
498 parameterizing some variables. This fixes bug #1036.
499 kes Undo recent reservations changes ... will apply them later
500 when they work better.
502 ebl Fixes #1034 which cause mysql to hang the connection after 8h
503 ebl Change default statistics target of filename.name and path.path
504 fields for PostgreSQL. This speeds lookup by indexes. Thanks
506 kes A few more tweaks to new reservation code. Make sure to clear
507 vol released flag when retaking volume. When reading label and
508 label is bad mark volume unused. When recycling, mark volume
509 unused so it can be renamed.
511 kes Fix reserve_volume() so it doesn't release a volume in use
512 (i.e. a volume entry not marked released). This should be
513 the last part needed to fix bug #1018.
515 kes Move Heartbeat documentation from Job to Director resource.
516 This fixes bug #1033.
518 kes Fix existing switch drive SD code to call autochanger to release
519 any old volume. This must be done to keep the autochanger from
520 releasing subsequently newly reserved volumes in doing a close().
521 This should fix bug #1018.
522 kes Fail if attempting to get console input in batch mode. This
523 should help fail RunScript console commands that are incomplete.
524 kes First cut implementing switch_drive() in SD (not actually called).
526 kes Implement first cut running console commands in a RunScript.
528 ebl Fixes bug #1028 where 'Selection Type' option was not usable
530 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
533 Release Version 2.2.7
535 kes Add new free_tls() entry point so that Win32 builds.
536 kes Fix compile warning in src/lib/util.c
537 kes Fix entry point for edit_job_codes() so that Win32 builds.
538 kes Fix seg fault Frank Sweetser reports in regression testing
539 on his systems. The problem was that the original author of
540 bsnprintf.c did not take into account the side effects of
541 using ++x in the argument to a #define.
542 kes Make SD protocol backward compatible with version 2.2.x.
544 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
545 because Bacula no longer restores sockets.
546 ebl Always use ignorecase fileset option on win32 FD.
548 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
549 that implements double quoting include names in conf files,
550 and also allows piping input by having the first character
551 be a vertical bar (|).
552 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
553 that implement %f in RunScripts to pass the FileSet name.
554 kes Skip leading | when lex input comes from a pipe as suggested
555 by Michael Stapelberg <michael@stapelberg.de>.
557 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
558 Nerijus Baliunas <nerijus@users.sourceforge.net>
560 kes Implement Plugin Directory and plugin events.
562 kes Implement a security enhancement: TLS authentication but no
563 encryption. Enabled by setting 'TLS Authentication = yes'.
564 Note when this is on, TLS encryption is turned OFF!
566 kes This patch corrects a problem where the maximum concurrent storage
567 jobs counter gets out of sync during restore jobs causing jobs to
568 'wait on max Storage jobs'. This patch fixes bug #1009.
570 kes This patch fixes bcopy so that it produces correct Volumes.
572 kes This patch eliminates spurious output to the console during a VerifyVolume
573 job that contains encrypted data. It fixes bug #1024.
575 kes This patch prevents the 'status dir' command from trying to use a scratch
576 volume and possibly moving it from one pool to another. This patch fixes
579 kes Add new include to postgresql.c suggested by Marc Cousins so
580 that it compiles correctly with pgre version 8.3.
582 kes Fix --archivedir addition to configure. Replace it with
583 --with-archivedir in configure.in This fixes the regression
585 kes This patch fixes bug #1012 where the job is canceled because
586 of Max Run Time exceeded when the job has not yet started.
588 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
589 one 'part' to write. Instead of each part being stored on disk,
590 written to DVD, then deleted from disk, all parts are written to disk,
591 and only the last is written and deleted from disk.
592 kes This patch fixes the status command to include the formating string for
593 JS_AttrInsterting. It fixes bug #1021.
594 kes This patch should fix the Mac OS X build problem on the latest
595 Darwin, where sys/types.h was not included correctly (apparently
596 due to a change in the Mac headers). The solution was to explicitly
597 ensure that it is defined for the ./configure.
598 This patch also has a rebuild of configure that includes the Debian
599 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
600 kes This patch should ensure that queued messages to the console are
601 displayed as soon as possible. It should fix bug 1007, but has been
602 reported not to work.
604 kes This patch fixes the infinite loop when trying to increase the
605 maximum number of volumes in a Pool during the add command.
606 This patch fixes bug #1008.
608 Release Version 2.2.6
610 db Remove extra data on estimate command in joblist for bat.
612 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
613 really change anything, but is the beginning of doing it *right*.
614 To do it completely right the LastWritten date must be passed to
615 the SD, but it is not yet done.
616 kes Minor tweaks to some bat restore SQL.
617 kes This patch fixes bug #1003 where putting the message output from
618 a Verify job into the catalog results in a recursive loop. The problem
619 seems to show up only with postgresql (to be verified).
620 kes Correct %x to %p in postgresql debug statement.
622 kes Fix bug #942 where lots of emails where generated when the heartbeat
623 interval was low and Bacula wanted a different tape from the one in
626 ebl Add new SD despooling attributes and Dir inserting attributes
627 job status codes in the catalog (Status table).
629 ebl Use qmake-qt4 instead of qmake when available (debian system).
631 kes Add a security warning to src/cats/make_catalog_backup.in indicating
632 that passing the password via the command line (arg 3) is insecure.
633 This responds to bug #990 (it doesn't fix it).
635 kes Set default debug_level to zero. This corrects bugs #991 and #993.
636 kes Fix a crash in bat when it cannot connect to the Director for example
637 if the Director is not running.
638 kes Remove redundant INDEX (JobId) from File table in the trunk.
640 kes Make explicit exception to GPL in LICENSE to permit linking
641 the Win32 FD with Microsoft VSS code.
642 kes Apply the Solaris package patch from
643 Masopust, Christian <christian.masopust@siemens.com>
644 kes Apply the patch to optionally add a timestamp in the debug output
645 submitted by Mariusz Czulada <manieq@wp.eu>.
647 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
648 backend (sql_strerror). Fixes bug #989
650 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
651 It applied with no problems.
652 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
654 kes Redirect stderror to stdin on mt status command in mtx-changer.in
655 since the status is returned on stderr on Solaris.
656 kes Activate Close button on tray-monitor window. This fixes
658 kes Check for NULL item in parse_conf.c before calling it. In the
659 case of Device, there is no item and this caused a seg fault when
660 Device appears in the conf file.
661 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
662 avoids pulling in config.h multiple times in some new code.
664 kes Fix spurious warning message printed when creating a volume with
665 a LabelFormat. This fixes bug #976.
667 Release Version 2.2.5
669 kes Add JobId in place of Job name in all the Jmsg() output.
670 kes Correct the APP_DESC for the Win32 storage service (remove an e).
672 kes Make maxvol-test and new more strict maxvol2-test work.
673 kes Print JobId in all Jmsg() job output.
675 kes Add new SD despooling attributes and Dir inserting attributes
676 job status codes. This fixes bug 961.
677 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
679 kes Fix doc issue. This fixes bug #963.
680 kes Fix listing performance problems in bat. Pointed out by
682 kes Remove old debug code.
683 kes Fix bat code that tests for Win32. This should fix bug #968
684 kes Query 5 list wrong Vol after migration. This fixes bug #960
686 ebl Fix #969 where user can't change Replace option in restore menu.
688 kes Save jcr in thread specific data (tsd) for each thread.
689 kes Make Dmsg() print JobId as -%u.
690 kes Make Jmsg, Emsg, and others automatically pickup the jobid
691 for the thread if it exists.
692 kes Remove old reservation debug jid code.
693 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
694 ebl Add an option that permit to specify spool size in job
695 definition. (Applying patches/testing/spoolsize_per_job.patch).
696 You must upgrade SD and DIR at the same time.
697 dvl Add new configuration item --archivedir
698 dvl Adjust regression tests to use tmp not /tmp. This will allow
699 multiple concurrent runs of the regression tests.
701 kes Fix race condition that drops final block written to volume.
702 This happens in rare cases with multiple simultaneous jobs
703 when the Volume fills. This fixes bug #964. May be related
704 to bug #935 and possibly #903.
705 kes Eliminate more strerror() and replace with bstrerror().
706 kes Remove BSD getopt and replace with unrestricted IBM version.
707 kes Fix Win32 build for changed calling sequences.
708 kes More tweaks to the mount volume routines to get everything
709 right. Changed variable name from find to have_vol, which is
710 much easier to understand.
711 kes Enhance btimer debug code.
713 kes Fix FD->SD authorization failure, which was due to spurious
714 wakeups from a pthread_cond_timedwait(). Simply check the
715 predicate before continuing. This fixes bug #953.
716 kes Add const char where needed (more to do). Remove temp debug code.
718 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
719 kes Don't overwrite error message in check_tables_version.
721 kes Unlock batch insert tables with same calls used elsewhere.
722 kes Allow starting 59 jobs a second.
723 kes Make SD session key more random.
724 kes Add retry for SQLite opening db if it fails. Probably helps
726 kes Suppress extra error messages during batch insert failure.
728 kes Add jcr to timer packets so if killed message can be sent to job.
729 kes Add JobId to all Dmsg() output.
730 kes Put some FD auth code on dbglvl rather than fixed.
731 kes Return insert attributes error message in db msg buffer to avoid
732 false error messages. Helps fix bug #966.
733 kes Separate batch init error messages. Probably helps fix bug #966.
734 kes Make SD code that contructs attribute insert check string lengths
736 kes If Dir gets an error during inserting attributes, cancel SD.
737 This reduces unnecessary error messages.
739 kes Correct search boolean for getting Volume info
740 ebl Cleanup batch insert code. Probably fixes bug #965.
741 kes Back out one small change to the reservation system (reserving a volume).
742 kes Rework how a Volume is mounted. It is now much more intelligent and
743 will always attempt to use any mounted volume if possible and reduces
744 calls to the Director asking about volumes.
746 kes Turn off some code when batch insert not enabled.
747 kes Edit FD name in connect error messages.
748 kes Rework the reservation system to take into account that the Director
749 might give us a Volume that is different from the current one being
750 used, and to ensure that we don't exceed Maximum Volume Jobs.
751 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
752 fatal error with multiple jobs running'
753 kes Add more debug code in reservation system.
754 kes Implement maxvol-test to check bug #947.
756 kes Add code to handle tray monitor separated from Win32 FD.
757 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
759 kes Add missed return in fixing verify bug -- trunk only.
760 ebl Fix a command parser issue causing a director segfault.
761 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
763 kes Increase the max block size to 4MB fixes bug #957.
764 kes ERABT if user sets min block size > max block size. Fixes bug #956.
765 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
766 is not properly mounted (recognized) during a poll.
767 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
768 Job that has differences reports Verify OK.
769 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
771 ebl Add an option to operate on all pools with update vol parameters.
772 This complete the project 20. Patch from Nigel Stepp.
773 ebl Add history support to bconsole when using readline.
774 Using Ctrl-D to exit doesn't update .bconsole_history
775 kes Modify new volume algorithm to use max MediaId for generating next
776 volume number rather than the count of Volumes. This should essentially
777 eliminate the failure rate if some volumes were deleted. Bug #921.
778 kes Begin implemention of Optimize Job Scheduling.
779 kes Implement restore callback that Dirk and I agreed on for bat
780 restore. This fixes bug #928. Restore of backup of zero files fails.
781 kes Fix SQL Catalog logging which broke with new db_escape_string
784 Release Version 2.2.4
786 kes Fix bacula_cats.def for new db_escape_string().
787 kes Increase size of name string when FD making connection to SD.
788 May fix bug #953. FD->SD connection failure.
790 kes Add code to help Dan debug 2drive-incremental-2disk test.
791 kes Add code to try to fix bug #908.
792 kes Add waits to multiple exit detection code to try to force pid
793 file to always be deleted.
794 kes Restore good dev.tar.gz to rescue set appropriate binary property.
796 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
797 trying to switch drives by checking for blocking before unblocking.
799 kes Cancel storage daemon in all cases where FD reports error. This
800 should fix virtually all cases of bug #920.
801 kes Fix db_escape_string() for MySQL which did not compile.
803 kes Fix error message that was clobbered when Dir tells SD it does not
804 have write permission on Volume. This should fix a minor point
805 in bug #942, but not the main problem.
806 kes Add code to cancel job in SD if FD connection fails. This should
808 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
809 dvl Pass jcr and db into db_escape_string() to enable better escaping
811 kes Fix migration code to get correct Volume name with multiple volumes
812 by skipping |. Fixes bug #936.
813 kes Implement patch supplied by Landon to fix bug #944 where using
814 TLS with bconsole uses 99+% of the CPU.
815 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
817 kes Move patches into patches directory.
819 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
822 ebl Using 'm' in bconsole will show messages like before,
823 and not memory usage.
824 kes Fix bug #935, and probably also bug #903 where files were not
825 restored. MediaId was not properly set in JobMedia record after
828 kes Suppress chown and chmod error messages if the FD is not running
831 kes Apply Martin Simmons' patch that should turn off the new API usage
832 when batch insert is turned off allowing building on older
834 kes Add ./configure search in qwt-qt4 for qwt package
836 kes Bacula is now free of 3rd party GPL copyrighted code!
838 kes Add guid_to_name.c/h which replace idcache.
839 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
841 ebl Detect if new PosgreSQL batch insert API is present.
842 kes Correct incorrect mempool call causing Director crash. Occurs on
843 systems without va_copy().
844 sb Update spec files for 2.2.1 release
846 kes Fix memory pool call in ua_output.c. bug #934.
847 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
848 Add test program to fnmatch.c
850 kes Integrate patch to README.vc8 from
851 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
852 edit it to get it into Unix patch format.
853 kes Implement mkpath.c to replace old FSF makepath.c
855 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
857 Release Version 2.2.1
859 kes Update POTFILES.in
860 kes Cleanup a few underquoted AC_DEFUNs in configure
861 kes Apply patch from Martin Simmons that adds a test for va_copy to
864 kes Fix bug #921 by increasing the number of tries to create a new volume
866 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
867 can be called multiple times. Implement a version for machines
868 without va_copy() that gets a big buffer.
870 kes Integrate more portable zone offset code into bsmtp.c
871 Submitted by Attila Fülöp.
873 kes Fix bad SD->FD return status reported by
874 (James Harper) <james.harper@bendigoit.com.au>
875 ebl Fix a bug in read_close_session which return random status
876 thanks to James Harper
878 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
879 and directory names during restore of single file/directories.
880 kes Add sanity checks to .sql command when string is empty. Hopefully
881 that will resolve Dirks Director crash.
883 kes Apply patch submitted by Martin Simmons that corrects a seg fault
884 in the bsmtp chat subroutine when debug is >= 10.
886 kes Fix Director crash when running bat SQL queries.
887 kes Add David's notes on Item 8: Copy pools.
889 kes Rework projects file to be current and ready for a vote.
890 kes Enhance lex scanner error message.
892 kes Tweak LICENSE file to mention BSD code.
893 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
894 if specified on the ./configure.
895 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
896 This class is intended to allow us to open a second bsock to the
897 Director while in the restore subdialog.
899 kes Fix configure to create bat Makefile before creating dependencies.
900 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
901 kes Add a tooltip to the tray monitor.
902 dvl Set the Director's PID file before dropping privs. This fixes
905 kes Update AUTHORs file
906 kes Increase the default max concurrent jobs to 20 in FD and SD to
907 correspond with the default .conf files.
908 kes Rewrite the Win32 service routines. This eliminates the 3 copies
909 some different, of the same file created by RN when porting the
911 kes Rearrange some of the Win32 directories and the placement of the files
913 kes Set DEVELOPER flag in version.h
915 ========================================================================
916 Release Version 2.2.0
918 kes Apply a second doc patch from Marc.
919 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
920 improves the tips section that discusses how to setup multiple
923 kes Update bat README file.
924 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
925 corrects a typo in the Recycle status check in db_find_next_volume().
926 This will probably fix a number of annoying problems with multiple
928 kes Modify most of dird/msgchan.c to use bsock class calls rather than
929 bnet calls -- no functionality change.
931 kes Modify the Verify output to specify if files are missing on
932 the Volume(s) or disk. Fixes confusion in bug #916.
933 kes When more than one Volume is read in a migration job, the last
934 Volume bytes reported are from the last read volume rather than
935 the last written volume. Fixed. This fixes bug #910.
936 kes Fix display of Recycle flag after update volume=foo recycle=yes.
937 It previously printed New Recyle flag is: no. This fixes bug
940 kes Correct seg fault when switching tape drives during restore.
941 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
942 be used until after 2.2.0 release.
944 kes Remove fnmatch() in SD that permitted wild card specifications.
947 kes Fix %g in filename returned by SQL for browse tree reported by
949 kes Fix configure so that it puts config.out in the cwd rather than
951 kes Attempt to fix the locking problem reported by Eric in bug #906.
952 kes Make berrno class to leave errno unchanged after constructor call.
953 kes Make bnet_server use the heap rather than the stack to allocate
954 its socket fd pointers to avoid a crash at termination. Problem
955 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
957 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
958 and putting it in depkgs-qt along with Qt4.3.
960 kes Rework code in acquire.c that switches drives for reading when
961 the Media Type does not match. This should fix bug #906
963 ebl Fix a director segfault during job setup #907
964 kes Correct seg fault in postgresql when first operation returns no
965 rows. Fixes Dirks File browser problem seg fault with bat.
967 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
968 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
971 kes Implement PopUp YES/NO dialog for bat.
973 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
975 kes Correct RunScript to terminate job in FD on failure.
976 kes Change abort_on_error and AbortJobOnError to fail_on_error
977 and FailJobOnError in RunScripts.
978 kes Minor tweaks of code formating in RunScripts, principally to
979 avoid depassing 80 columns.
981 kes Eliminate one #ifdef Win32 in bsmtp
982 kes Implement grow tool to grow a file for testing very large databases.
983 kes Add big-vol-test to test Bacula seeking with > 5GB.
986 kes Modify find_next_volume() to return all values in Media record.
987 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
991 kes Update Release notes
993 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
994 Warning, in previous beta version, all media get from scratch keep their
997 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
998 This should fix bug #842. Made a note to look at removing the temp
999 files at the end of the install.
1000 kes Add ability to mount and unmount a file device providing it is
1001 marked as being removable and has the appropriate mount and unmount
1002 commands defined in the Device resource. This fixes bug #830.
1003 kes When applying a storage override, release all previous storage
1004 definitions rather than just prepending the new storage.
1005 This should prevent a good deal of confusion.
1007 kes Implement ./configure search for qwt libraries.
1009 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1010 Win32 FD. This should fix bug #893.
1011 kes Remove an unnecessary beep in Win32 init code.
1012 kes Update copyright dates in Win32 executable about boxes.
1013 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1014 code with a BSD getopt.c and getopt.h.
1015 kes Remove sched.h from the Win32 compat directory -- not used.
1016 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1017 need to shut it down, do it through the services panel or the command
1019 kes Remove some inappropriate Bacula FSFE copyrights.
1020 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1021 kes Fix regress config non-portable test as pointed out by
1022 Florian Heigl <florian.heigl@gmail.com>
1023 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1024 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1026 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1027 Reported by Frank Sweetser.
1031 kes Fix client-only build.
1032 kes Integrate client-only fixes for bsys (initgroups) and conio from
1033 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1034 kes Make arguments to get_scratch_volume() in same order as other
1036 kes Rework the prune_volumes() subroutine so that after purging and
1037 no volume found in desired pool, it will check for a scratch
1038 volume. This prevents recycling the whole scratch pool.
1039 kes Add code to status storage to print boffset_t (largefile support).
1041 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1042 kes You now need a --with-qwt=<dir> to be able to build bat.
1043 kes Update src/win32/cats/bacula_cats.def to include the new
1044 db_get_query_dbids() call on Win32.
1046 kes Correct a problem when selecting a scratch volume and moving
1047 it to another pool that lost some columns.
1048 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1049 kes Enhance Autochanger error messages to include Volume and device name.
1050 kes Rework prune_volumes() code to take account of InChanger flag,
1051 and to handle recycling volumes going to the Scratch pool and
1052 current pool because the RecyclePool directive.
1053 kes Implement a better and more efficient db_get_query_dbids() to
1054 handle creating and passing back a list of DBIds.
1058 kes Start work on new more efficient DBId subroutine. First use
1059 will be for recycling volume to Scratch inchanger.
1060 kes Increase number of JobIds in pruning from 1000 to 10000.
1061 This to be replaced by above routine.
1062 kes Begin implementation of building Qt4 on Win32.
1063 kes Correct typo in fix I added for bad TLS shutdown.
1064 kes Pull 2.0.3 patches into patches directory.
1065 kes Update Release notes. Include qt-console in line count.
1066 kes Update Projects file.
1068 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1069 bug in migration code where a job that spanned two volumes
1072 kes Implement new BST_DESPOOLING blocked state. Change from locking
1073 during despooling in SD to blocking. This means that other threads
1074 can work with the device structure, in particular the reservations
1075 system while despooling.
1077 kes Fix return in reservation message queue that missed clearing
1078 the jcr lock (implemented 26Jun07 below).
1079 kes Rename a number of dev methods to make locking function names
1081 kes Document locking in lock.c. Move lock structures to new file
1084 kes Move reservations message lock to lock jcr only this
1086 kes Move main SD locking code into lock.c (new file).
1087 kes Update Win32 build to include lock.c
1091 kes Dirk committed the qwt library code for drawing graphs in bat.
1092 kes Tweak install of qwt so that it is integrated with ./configure.
1094 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1095 out by Eric (my typo).
1096 ebl Fix configure.in to get batch mode enable
1097 kes Return correct string from authenticate.cpp in bat when connecting
1099 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1100 spurious line drops when using TLS.
1101 kes Do not file reparse points when restoring a file that already
1104 kes Implement Windows reparse points -- similar to directories, but
1105 we do not descend into it. This is a first cut. They seem to
1106 be backed up, but restore is not yet tested.
1107 kes Remove restore_blocking in tls code when shutting a socket to leave
1108 it in blocking mode. Hopefully this will fix the encryption bug
1109 reported by Frank Sweetser.
1110 kes When opening a file for backup, tell the OS that we are going to
1111 read it sequentially -- optimization.
1112 kes Change variable names in authenticate_director() to not conflict
1113 with member names in bat. Caused great confusion with compiler,
1116 kes Queue openssl error messages in case of comm problem.
1117 kes Do shutdown() call if socket terminated.
1118 kes Remove some duplicated code in tls.c
1119 kes Move more of the bsock member variables into private and access
1121 kes Add Frank Sweetser's tls-test to the regression suite.
1123 kes Add Swedish sv.po file
1125 kes Don't print clock skew message in FD if less than 3 seconds diff.
1126 kes Add a bit of VSS info to status client.
1127 kes Implement a first cut of Vista VSS, using Win2003 code.
1129 Release: 2.1.20 beta
1131 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1132 loaded tape but uses first drive).
1133 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1134 This was indeed a Win32 issue.
1136 kes Simplify search of autochanger for in-use Volume.
1137 kes Fix exit condition of check for in-use volume. kes Remove
1138 inappropriate my_postgresql_free_result() in db_close()
1140 kes Fix bad return in FD when encryption signature not found.
1141 Probably caused a crash.
1142 kes Inhibit missing encryption signature error messages for
1143 file types where no signature computed.
1144 kes Correct inverted check on autochanger in reservation system.
1145 kes Tweak debug code in autochanger reservation.
1147 kes Add some additional locking in the cats directory in subroutines
1148 that modify packet variables called from batch insert.
1149 kes Rework how dcrs are allocated. new_dcr() can now be called
1150 with an existing pointer, and it will simply clean it up.
1151 This allows the reservation system to test various different
1152 devices, and will permit easy device changes.
1153 kes A bunch of changes all over to handle new new_dcr() calling
1155 kes Work more on the Volume management in the SD. Remember Volumes
1156 for tape drives and for autochangers (even virtual disk changers).
1157 kes When looking at the Volume list to reserve a drive, handle
1158 autochanger names correctly by interating through the changer
1159 devices. Also call the Director to see if a Volume is suitable
1160 for the current job.
1161 kes Fix some bugs in bscan. Make sure all media records are written.
1162 Make sure that valid JobMedia records are written for disk files.
1163 Previously they were completely wrong.
1164 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1165 that the URLs don't change and so that the developers will all
1166 work off the same copy. Rebuild from scrach.
1167 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1169 Release: 2.1.18 beta
1171 kes Fix seg fault in FD from incorrect digest size.
1172 kes Fix argument to non-OpenSSL crypto.c subroutine.
1174 Release: 2.1.16 beta
1176 kes Remove a few malloc()s from the encryption code.
1177 kes Use the class calls to bsock in filed/backup.c and restore.c in
1178 place of the old bnet_xxx code.
1179 kes Implement code that does an on the fly calculation of the
1180 signing digest during restore of encrypted files. It makes
1181 a best guess at the algorithm, and if it is not correct, will
1182 then revert to the old code which reads the file after it is
1184 kes Implement at least one missing crypto stream in stream_to_ascii()
1185 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1186 #877 where a reload with bad syntax causes Dir to exit.
1188 Cut: 2.1.14 beta (not released)
1190 kes Do not free a volume on a tape drive until another volume is
1191 mounted and read, or the autochanger unloads the volume.
1192 This should help the SD re-use volumes that are already mounted,
1193 and should fix bug #886.
1194 kes Apply patch from user brettedgar that allows gnome2-console include
1195 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1196 kes Apply patch from Lucien Weller that fixes day of week calculation
1197 because of DST flag problem. Fixes bug #887.
1199 kes Move find_next_appendable_volume() to after acquiring a valid device
1200 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1202 kes Unable to reproduce bug 872. However added additional testing for
1204 kes Bug #874 resolved by documenting SQLite limitations.
1205 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1206 kes Bug #881 resolved by removing typo in mtx-changer script.
1207 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1208 approval. Added a link to the wiki on the web page, and implemented
1209 a backup from http://paramount.ind.wpi.edu
1211 kes Fix update allfrompool to pass pool name.
1213 kes Convert to pure GPL v2 license.
1214 kes Fix sscanf problems reported by Peter Buschman that caused
1215 a bus error on Solaris.
1216 kes Rework (simplify) the select prompt in bat.
1217 kes Move get_jobid_from_tid() into lib and create a
1219 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1220 should definitely fix the problem of lost error messages in the
1222 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1223 kes Eliminate tcpd.h from the project. Enclose the #include from the
1224 library with extern C ...
1225 kes Add print of signal name when a signal is trapped.
1227 Release: 2.1.12 beta
1229 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1231 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1232 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1233 makes SQLit3 run 30 times faster, though a bit less safe.
1234 kes Implement --with-batch-insert in configure and detection of thread
1235 safe libraries. It is on by default, but turned off if no thread
1236 safe library (e.g. SQLite 2) is available.
1238 kes Fix Bacula PostgreSQL buffer overruns.
1239 kes Do better checking for NULL results returned from PostgreSQL;
1240 implement retry for failed queries; clear results buffer after
1241 failed query. Hopefully this will correct the PostgreSQL failures.
1243 kes Implement algorithm to handle only one appendable volume with
1244 Prefer Mounted Volumes = no.
1245 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1246 returned from a query.
1247 kes Make volume lock recursive.
1248 kes Implement an additional volume reservation algorithm that
1249 starts by considering all reserved volumes then uses the
1250 old brute force algorithm of searching the resources to
1251 find a suitable device.
1252 kes Add new reservations debug code and refine the old code.
1253 kes Update the win32/dll/bacula.defs file.
1255 kes Tweak reservations algorithm to permit a few more cases, i.e.
1256 volume reserved, but on different drive, ...
1257 kes Enhance SD status to include Pool and Media Type for drive in a
1258 more readable format (a bit longer).
1259 kes Fix PostgreSQL double free.
1261 kes Minor refactoring of restore decryption code.
1262 kes Add code to smartall.c to detect double free of a buffer.
1264 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1265 so that bsmtp will create a correct email address (mailbox only).
1266 kes Modify 'memory' command so that the buffers are listed as 'In use'
1267 to avoid confusion with Orphaned buffers.
1268 kes I reworked the OpenSSL include/lib flags to be handled in
1269 the standard Bacula way, which should fix bug #863 concerning
1270 non-standard OpenSSL libraries.
1272 kes Implement Help Browser window for bat.
1273 kes Fix reload bug that reset StorageId to zero.
1275 kes Fix TLS #ifdefing when TLS turned off.
1276 kes Ensure that when labelling a tape with Slot=0 that InChanger
1278 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1280 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1281 add DISTINCT (required by PostgreSQL).
1282 kes Implement BSOCK authenticate_director() method. Eventually will
1283 authenicate all daemons.
1284 kes Move several more functions into the BSOCK class.
1286 kes Add code to tell the OS that we no longer need a cached
1287 file that we were reading. In findlib/bfile.c. Also,
1288 only cache files that we are reading. Thanks to
1289 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1290 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1291 kes Implement script to automatically generate cats and dll .def
1292 files for Win32 dll.
1293 kes Update README.mingw32 to include new .def file generation.
1294 kes Correct typo in UTF-8 error message as reported by:
1295 jhernandez <julianhernandez@gmail.com>
1296 kes Add additional sm_check() code on debug level 1.
1297 kes Set default debug level to 1.
1298 kes Trap SIGABRT in attempt to get traceback.
1300 kes Reduce bat connect timeout from 30 to 15 seconds.
1301 kes More restructuring and implementing BSOCK class in place of
1303 kes Remove a few unnecessary malloc() tests in crypto code.
1304 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1305 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1306 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1308 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1310 kes Fix Verify InitCatalog. The attributes were not pointing to the
1311 correct saved location.
1312 kes Implement message callback so that GUI is sure to get all
1313 daemon messages. Currently displayed in a dialog in bat.
1314 kes Ignore SIGUSR2 (Bacula timer) in bat.
1315 kes Apply regress patch from bug #859 to allow regress to work
1316 with Solaris compiler.
1318 kes Begin adding TLS support to bat.
1319 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1320 clean up lex.c and make it more readable.
1322 kes Move more bnet functions into the BSOCK class.
1323 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1324 kes Complete change of berrno strerror() method to bstrerror()
1326 Release: 2.1.10 beta
1328 kes Cleanup incorrect email addresses in bsmtp.
1329 kes Make bat display initial messages rather than discard them.
1331 kes First cut of adding .mod to the run command.
1332 kes Implement auto display of messages in bat.
1333 kes Enhanced preferences to allow all Bacula output to be
1336 kes Try to make bsmtp date routines more generic.
1337 kes Fixed bug #856 autochanger documentation.
1338 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1339 kes Add new cats entry point so Win32 builds.
1341 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1343 kes Do better checking for the MySQL 64 bit libraries looking for both
1344 .a and .so libraries.
1345 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1346 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1347 kes Require the thread safe version of MySQL during configure. Thanks
1348 to Andre Noll for pointing this out.
1349 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1350 continuing in migration code.
1351 kes Apply implementation of tray-monitor font derived from gnome-console
1352 submitted by Andreas Piesk <a.piesk@gmx.net>
1354 kes Eliminate important memory loss in SQLite
1355 kes Fixed the batch insert MySQL thread specific data that was not
1356 being freed. See cats/mysql.c:db_thread_cleanup().
1357 kes Fix restore before command.
1358 kes Convert old hdr.name to name() in a few places.
1359 kes Implement update jobid command.
1360 kes Return all time_t dates in db_get_job_record()
1361 kes Stop watchdog in SD earlier.
1362 kes Put Pool just after Storage in please mount message.
1363 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1366 kes Update the po files.
1367 kes Fix Verify InitCatalog by making it cache attributes.
1369 kes Change name bacula-bat to bat for man 1 page to correspond to
1371 kes Check for client and store NULL pointers in status command. This
1373 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1374 kes Fix sign extended editing of %p.
1375 kes Clean out a little old #ifdefing in cats/mysql.c
1377 kes If time diff between DIR and FD is more than 600 seconds convert
1378 INFO message to WARNING.
1379 kes Implement heap size display in status for all daemons.
1380 kes Attempt to fix MySQL db open memory loss (not successfull).
1381 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1382 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1383 Query. This looks like a MySQL but but by doing extra releases,
1384 the memory goes away. This should fix bug #847.
1386 kes When backup fails, cancel SD before waiting for sd termination.
1387 kes If SD is waiting for FD to connect during cancel, wake up the
1389 kes Fix fsf code so that errno is correctly reported.
1390 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1392 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1393 so that Bacula doesn't later stumble into a seg fault.
1394 kes Use the term Restore Client in the restore Job report.
1395 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1396 the original job's FileSetId.
1397 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1398 spooling in migration jobs. Not yet tested.
1399 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1400 reading conf file from a pipe. However, do it with open_bpipe()
1401 rather than popen. Not yet tested.
1403 kes Fix an ugly bug where the VolCatBytes were getting updated
1405 kes Implement bconsole memory command that prints current memory
1406 usage, plus smartalloc dump.
1407 kes Clarify some error messages in backup, admin, and migrate.
1408 kes Shrink label dialog to smaller size.
1409 kes Invert Cancel OK buttons on restore to be OK Cancel.
1410 kes More strerror() to bstrerror() conversions.
1412 kes Start implementing bstrerror() in place of strerror().
1413 kes Stripping path -- seems to work.
1415 kes Prevent door and port files from being restored (mostly
1417 kes Free an unreleased buffer in compat code.
1418 kes Change console Job name from *Console* to -Console- to eliminate
1419 Win32 filename problems. Put Win32 path separator when creating
1420 Console file. This fixes bug #846.
1421 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1423 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1425 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1426 to force Win32 error message.
1428 kes First cut strip path. The data should be passed to the FD,
1429 but nothing is done with it yet.
1430 kes Enhance the digest and signature routines in the crypto
1431 library to accept a JCR and to use it to print error messages
1432 so that they will go in the Job report rather than the daemon's
1434 kes Simplify some of the verify signature code.
1435 kes Simplify a few of the alternative returns in the signature
1438 ebl Use only POSIX regex instead of GNU regex in breg.c for
1439 File relocation. It fix broken freebsd compilation.
1440 kes Convert all other Dir files to use new ua class message
1442 kes Tentative fix for missing digest signature in bug 807.
1443 kes Correct handle problem in new win32_ftruncate routine.
1444 kes Convert ua_purge.c and ua_update.c to use new ua class
1445 message routines for bat.
1447 kes Correct incorrect installation of LICENSE in Win32 installer.
1448 kes Display LICENSE at the beginning of the Win32 install.
1449 kes Attempt to correct the need for the png files to be installed
1451 kes Reapply my bat.conf install script in qt-console. I think I
1452 editted bat.pro instead of bat.pro.in and it was lost.
1453 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1454 the /var/lock/subsys for subsysdir. Also corrects typos in the
1457 kes First cut update job.
1458 kes Correct configure to include qmake of src/qt-console directory.
1460 kes Make restore job yes/mod/no print in one command so GUI works.
1461 kes First cut implementing backup and restore client.
1462 kes Correct editing in Verify output that caused a seg fault.
1464 kes Insure that bat.conf is not overwritten during installation.
1465 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1466 while I was implementing migration in March 2006 !
1468 ebl Cleanup file relocation, using char *RegexWhere instead of
1469 char *where + bool where_use_regexp
1470 kes Update some manpages and add bat manpage.
1471 kes Make a first cut at converting bacula.spec.in for bwx-console
1473 kes Apply patch from John Goerzen to add hostname as fourth argument
1474 to make_catalog_backup script.
1475 kes Fix typos I introduced into bsmtp.c
1476 kes Make pm_strxxx() routines handle input of NULL pointer. This
1477 is to protect from NULL pointers returned from SQL databases.
1478 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1479 kes Add more debug to FIFO code -- fix fifo regression test.
1481 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1482 kes Add thread timer to bnet_connect() to break from OS if wait time
1485 kes Update Win32 build to include new files, new symbols, and
1487 kes Implement socket level heartbeat (tcp_keepidle)
1488 ebl Commit File relocation patch
1489 kes Make bat have 'make install' target.
1490 kes Warn during install if old gnome-console binary found.
1491 kes Warn during install if old wx-console binary found.
1492 kes Add -8 option to bsmtp command line to add content type utf-8.
1493 Fixes bug #809. (Character coding problem in bsmtp).
1494 kes If < is found in target (from, to, cc) then do not enclose the
1495 target in < > in bsmtp. Fixes bug #772 (malformed address).
1496 kes When printing certain items in dbcheck, stop after 300000.
1497 Fixes bug #822. (dbcheck loops).
1498 kes Incorrect status in Dir after waiting for mount with poll set.
1501 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1503 kes Print waiting to reserve a device every 5 mins.
1505 kes Don't call close_part in label.c if tape and relabel.
1506 kes Don't free volume if busy in close() -- should help with
1508 ebl Fix #824 RunScript bug (After script could be execute twice)
1509 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1510 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1511 Add a regression script to test RunScript
1513 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1516 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1517 deprecated. No additional bugs will be fixed, and they will be dropped
1518 in a future release (probably 2.4.0).
1519 kes Change name of wx-console to bwx-console to make it more Bacula
1521 kes Change the name of gnome-console to bgnome-console to make it
1524 kes Some time in March, a Feature Request with patch from Jorj Bauer
1525 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1527 The ability for the director to validate a Client (FD) CN against
1528 an arbitrary set of patterns rather than the hostname, with
1529 A new 'TLS Allowed CN' set of directives which are implemented
1530 in the Client resource. Then pattern matching is used in place
1531 of hostname matching against the Certificate's CN. As an example, we
1532 have certificates which (a) use a local CA, and (b) have a CN of the
1534 kes Add new/changed entry points to Win32 build
1535 kes Create unaccepted-projects for projects that are not accepted.
1536 kes Simplify locking in the reservations system.
1537 kes Add more debug code in reservations.
1538 kes Make sure error condition on reserving a volume is handled correctly.
1539 kes Correct handling of volume_in_use.
1540 kes Correct handling of initializing a device.
1541 kes Move handling of broadcasting releasing a device into release_device().
1542 kes Correct attaching dcr to dev so that it is only done if device
1543 is properly initiated.
1545 kes Locking debug level tweaks in SD.
1546 kes Tweak new Volume code.
1548 kes Add exec external-command [wait-seconds] to bconsole. This
1549 executes the external-command. Note! normally external-command
1550 should be enclosed in double quotes.
1551 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1552 it should normally be off in a production system.
1554 kes Implement die command for SD so that we can force it to dump.
1555 kes Implement SD lock debug code.
1556 kes Implement new algorithm for keeping Volume list in SD. It
1557 is now owned by the device.
1559 kes Implement new code for freeing in use volumes that should
1560 resolve if not all, some of the problems of multiple drive
1561 tape conflicts described in bug 801.
1563 kes Fix gui/bacula-web/images files in svn.
1564 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1566 ebl Fix a bug in batch mode (in string escape)
1567 kes Correct migration prune SQL typo that crept in in a
1568 recent 2.1.x change.
1570 kes Move bnet_despool() into class in bsock.c
1571 kes Modify job report to include director name and Build OS.
1572 kes Move drop root privilege and check_catalog() before fork.
1573 kes Add update database scripts (version 9 to 10) to updatedb directory.
1575 ebl Check size and age of each file after its backup to see if
1576 it has changed during backup, if 'checkfilechanges' is set.
1577 The FD will do an extra check (stat(2)) after
1578 each file backup. mtime, ctime and size are compared with
1579 'before backup' information. If time or size mismatch, an
1580 error message will be generated. You must upgrade FD to use it.
1582 kes Make database name and user configurable
1583 --with-db-name=xxx --with-db-user=xxx
1584 kes Add back database type to message.c for debugging.
1586 kes Implement dir_sql() which issues an SQL query.
1587 kes Modify bat medialist to use dir_sql() and do some minor C++
1588 formatting as well as eliminating a number of pointers, simplifing
1591 kes Fix some of the mtx-changer grep commands for tape label readers.
1592 kes Convert a number of bsendmsg into the appropriate send/warning/error
1593 message class calls.
1594 kes Suppress the using database message in the .sql command.
1595 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1597 kes Add context menu for floating a window.
1598 kes Some minor cleanup and name changes in qt-console
1599 kes Add doing mt setblk 0 in Win32 mtx-changer.
1600 kes Apply Martin's bug fix to move definition of ENODATA for
1602 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1603 sqlite2 and sqlite3.
1605 kes More pruning cleanup.
1606 kes Turn on wait_for_drive by default in mtx-changer.
1607 kes Turn on Batch insert code by default as it now passes regression.
1608 kes Add ./configure --enable-bat to enable building of Bat.
1609 No install yet though.
1611 kes Implement a new .sql command for bat.
1612 kes Implement code to turn off pruning in obtaining the next volume.
1613 Pruning is turned off for the status dir command, but turned on
1614 for SD requests and for the list nextvolume command.
1616 kes Correct Qmsg() that was not updated correctly when committing a
1617 previous change (probably the recent TLS patch).
1619 kes Write new subroutine is_volume_purged() that explicitly checks
1620 if the Volume is purged, and if so marks it as such. This should
1621 resolve problems reported about needing to mount twice to recycle
1623 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1624 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1625 amount of duplicated code.
1626 kes Do volume pruning only for the Media Type desired (reduces pruning time
1627 if multiple Media Types are in the same pool).
1628 kes Implement more detailed info in the Job report for the Bacula version
1630 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1632 ebl Add bbatch tool to bench database and insert mode.
1633 Fix sql quote stuff in batch mode
1634 Fix sql stuff for mysql
1636 kes Correct problems with am/pm scheduling. Fixes bug #808.
1637 kes Implement new prunning code that prunes up to 1000 jobs at
1638 the same time. The same technique can be applied to a number
1639 of other prune/purge subroutines.
1640 kes Add an insanity check when starting a new tape job to ensure
1641 that the tape position has not been changed. If so fail the
1643 kes Fix Win32 build for dlls to add the folllowing:
1644 src/lib/bsock.c -- new file with new entry points
1645 src/lib/dlist.c -- new entry points
1646 src/cats/sql_create.c -- new entry point
1647 src/cats/sql_cmds.c -- new DATA item exported
1649 ebl batch mode cleanup bscan-test is ok now.
1650 kes Implement SD code to check length of disk volume before appending.
1652 kes Correct return status on db_batch... routines.
1653 kes Add call to db_write_batch_file_records() to migration code.
1654 ebl Fix AfterJob timing
1655 kes Move the checking of the database in initializion of the Director
1656 to after we drop privileges. This avoids the need for both root
1657 and bacula access to the DB.
1658 kes Correct a misplaced variable definition in src/filed/backup.c
1659 kes Correct how the new batch insert db_create_attributes_record()
1660 uses the arguments. Caused a seg fault in bscan.
1661 kes Implement lock() and unlock() methods in DEVICE class.
1662 Implement block() and set_block(xx) methods in DEVICE class.
1663 kes Modify bnet_connect() so that it uses time() to check for the
1664 wait time expiring (on some OSes, some system calls may not
1665 return immediately).
1666 kes Modify Verify to obtain the previous JobId when it is actually
1667 running rather than at schedule time (as it was in 1.38.x).
1668 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1670 kes When checking pid in pid file, continue running if the pid is
1671 the same as ours. This occurs on IRIX after a system crash.
1674 kes Extend new GUI API.
1675 kes Make the ua structure a class, and implement send_msg(),
1676 error_msg(), warning_msg(), and info_msg().
1678 kes Apply fix from for building wx-console on the Mac from
1680 kes Implement new select mechanism for GUI programs.
1681 kes Reorganize initialization of stackedWidgets in bat.
1683 kes Add updated nagios plugin supplied by Christian Masopust.
1685 kes More bat implementation.
1686 kes File migrate bug with Pool Occupancy using mediaid instead
1687 of jobids. Fixes bug #795.
1688 kes Fix orphaned buffers in filed backup and verify due to
1689 crypto buffers not freed during errors. Fixes bug #789.
1690 kes Extend new GUI api code to tree commands.
1691 kes Ensure that tree and dot commands check console ACLs.
1692 kes Permit marking directory with trailing slash.
1693 kes Allow 20 console connections (instead of only 10).
1695 kes Add smartctl call to bacula-sd.conf as an example of getting
1698 kes Modify jobq.c to let simultaneous restore jobs run. This may
1699 cause them to fail if they cannot get a drive.
1700 kes Add Client Connect Wait to Storage daemon to permit users to
1701 modify the time the SD waits for a FD connection.
1703 kes Correct virtual changer check which was backwards. This caused
1704 volumes to be unloaded into slots already occupied.
1706 kes Apply Command ACL filter to JobId list in restore command.
1707 kes Correct typeo in var.c patch.
1709 kes Don't let Bacula prune File or Job records for the current Job.
1710 kes Fix variable substitution pad + inc bug reported (with patch)
1713 kes Correct SQLite log table index as reported by Luca Berra.
1715 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1717 kes Begin implementing new comm signals for API.
1718 kes Fix a few places in lib/message.c where the open fd may
1720 kes Continue implementing lib/bsock.c (real class). Make jcr,
1721 who, host, and port private. There are new methods to access
1722 them for non-class use. This required touching a number of files.
1724 kes Add LANG=C to autoconf/randpass so it works with languages other
1725 than English. Fixes bug #788.
1727 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1729 You will not be able to generate Include/Exclude list any more.
1730 It will be fixed soon.
1731 If you want to use this, you can apply
1732 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1734 kes Restore of sockets created false error messages because Bacula
1735 no longer restores sockets, but the code was still trying to
1736 set the attributes on a non-existent file. Reported by a user.
1737 ebl finish RecyclePool feature
1738 Media will takes Pool.RecyclePool
1739 when moving from Scratch to a Pool or when user will do
1740 update volume=xxx frompool
1741 To use it, add RecyclePool = aPool to your Pool resource
1744 RecyclePool = Scratch
1748 kes Expand new BSOCK class adding signal() and new BNET signals.
1749 kes Begin enhancing the dot commands adding a new API function
1750 that returns more information and will make it easier
1751 to interface to the Director from a program.
1753 kes Make DEVICE fd private. Its new name is m_fd, and can be
1754 obtained with dev->fd() outside the class. This is the
1755 first of many DEVICE members to be made private.
1756 kes Implement Michael Renner's idea on having a virtual disk
1757 changer. I made some minor modifications (e.g. I did not
1758 implement the Virtual Changer directive, but simply set
1759 the Changer Command to an empty string.
1761 kes Implement a BSOCK send() method that writes the whole record
1762 in a single write() request rather than in two.
1763 ebl add update volume=xxx recyclepool=yyyy
1764 volume takes recyclepool from pool when using update volume=xxx from pool
1766 kes Fix encryption deblocking bug, which caused some restored files
1767 to be truncated. This fixes bug #763.
1768 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1769 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1771 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1772 ebl Use btime_t instead of uint64_t in media patch.
1774 kes Optimize the use of the database a bit in the Status dir command.
1775 Only open it when needed, ensure that if any previous database
1776 was opened, it is closed.
1778 kes Correct VolCatBytes bug from media patch.
1779 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1780 in the case of orphaned records.
1781 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1782 and File records in 300K chunks to be more efficient. This
1783 idea came from Juan Luis Frances (if I remember right).
1784 kes Apply Eric's scratch patch that moves a purged Volume to
1785 the RecyclePool. Question: how is RecyclePool set? what
1786 happens to the ScratchPool?
1787 kes Apply Eric's media patch that collects read/write media
1788 times as well as byte counts. This patch requires a
1789 simultaneous upgrade of the DIR and SD. Note, there
1790 should be some way to turn off timing. I'm not sure
1791 times are in Bacula units.
1792 kes Apply Eric's batch-insert patch.
1794 kes Update projects list.
1796 kes Implement Include/Exclude file lists in FD as dlists using
1797 the new dlistString class. This permits efficiently having
1798 large include/exclude lists and completes project Item 25.
1799 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1800 console is authorized to cancel the job. This fixes bug
1802 kes Modify SD so that the VolCatJobs medium record is updated
1803 at the beginning of a Job rather than the end. This
1804 fixes bug #775 where exceeding MaxVolJobs caused jobs
1806 kes Added a mutex around getting and setting Volume information
1807 so that multiple simultaneous jobs will single thread.
1809 Switch to using Subversion
1810 kes Remove src/pygtk-console/ from configure
1812 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1813 plus the entrypoints.
1814 kes Apply patch supplied that corrects debug print
1815 in canceling jobs for max run time. Supplied as
1816 part of bug #621, which was previously fixed.
1818 kes Test on job_canceled() and sd_msg_thread_done inside
1819 loop starting the message thread to avoid a race condition.
1821 kes Remove rl_catch_signal from console.c as it conflicted
1822 with the header definition. Fixes bug #765.
1823 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1825 kes Clarify some stored/acquire messages to indicate if the
1826 problem is with read or append.
1828 kes Fix memory leak with storage ids in cats/sql_get.c
1829 kes Terminate watchdog earlier to avoid reference to released
1830 memory -- reported by Jason Austin.
1831 kes Move closing the database from jobq.c to the director daemon
1832 termination routine. This fixes memory leaks for shadow jobs
1833 (i.e. migration jobs).
1834 kes Free up the unique jobid chain items in migrate.c. This fixes
1835 a memory leak problem.
1836 kes Convert some ugly looking for statements to use foreach_alist
1837 in findlib/find.c. This will facilitate converting the structures
1838 to use dlist (for large include/exclude lists).
1839 kes Fix a bug in the btree.c and btree.h routines, then rename them
1840 rblist and add them to be built in src/lib. Include some new
1841 methods written by Rudolf Cejka that make the code more readable
1842 (hides some of the ugly casting).
1843 kes Add set_next() and set_prev() methods which make the code much more
1844 readable. Also add a new dlistString class that facilitates storing
1845 strings in dlists. To be used in the large include/exclude lists.
1846 kes Make some trivial modifications to lib/tree.h that use rblist
1847 rather than dlist for storing the tree links. This was suggested
1848 by Rudolf Cejka. The result of this is that the restore tree now
1849 uses red-black binary trees rather than simple linked lists. This
1850 should give rather dramatic speed improvements for directories
1851 contining large numbers of directories/files (more than 10000).
1853 kes Fix maxruntime bug #621.
1855 ebl Implement the include JobID in spool file name project.
1856 kes Reorder projects file in order determined by Jan 2007 vote.
1857 kes Implement item #12 on project list -- quick release of FD by
1859 kes Fix open of SQLite3 db where user does not have write permission
1860 so that DIR does not crash. Fixes bug #761.
1862 kes Add back missing @ in Win32 Makefile.
1863 kes Change 'Device not configured to autolabel' from INFO
1865 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1866 which should restart an indefinite # of times.
1867 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1868 other DIR specifications.
1870 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1871 Fix path quoting in SQLite scripts.
1872 Fix problems with SHGetFolderPath.
1874 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1876 kes Fix Job restart on error bug that promotes an Inc to a Full
1877 backup. This should fix bug #755.
1878 kes Add qt-console and first cut of code.
1882 kes Fix Bacula->Documentation link on Win32 to point to index.html
1883 instead of bacula.html. Fixed bug #750.
1884 kes Return JobId in db_get_job_record() when JobId==0. This should
1886 kes Do not release source pointers when restarting a failed job.
1888 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1889 This *should* fix bug #747.
1890 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1893 kes Modify USTORE constructor to set an empty store_source string,
1894 and don't copy the store_source string in a cancel. Hopefully
1895 this will fix Arno's seg fault, bug #744.
1896 kes Add back code to disable conio in configure. Fixes bug #743.
1897 kes Correct the Options scanner in the FD to correctly handle
1898 SHA1 option, which was eating the next option. Reported by
1900 kes Add code to indicate when the SD is spooling, spool wait, and
1901 despooling as requested by Alan Brown.
1903 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob