1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
29 ebl Fix vtape on win32 and debian.
30 ebl Fix autoselect patch (cause segfault).
32 ebl Fix autoselect option broken for a while. Fix #1089. Need some
33 work with StorageId to be able to use a particular drive in a
36 ebl Rename faketape to vtape.
37 ebl Update faketape driver.
39 ebl Modify faketape driver to avoid sparse file.
40 kes Add make clean of qt-source directory during ./configure
41 kes Store last block number written to tape in DEVICE and
42 use it for testing for correct last block on EOT.
44 Release Version 2.4.0:
48 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
51 kes Add create_postgresql_database.sql to Win32 installer. Should
52 fix problem reported by Juilio Monteiro.
53 kes Get correct slot when auto unloading a device. This fixes bug
56 kes Fix multiple media restore.
57 kes Make DEVICE Slot private and access it via a method.
58 Allows better control over when it is set and cleared.
59 kes Fix possible seg fault if SQL error.
61 kes Add Martin's fixes to argument scanning for the estimate
62 command. This fixes bug #1093.
63 kes Add debug code to SD.
64 kes Fix renaming a Volume, which used the wrong Volume name.
66 kes If operator has rewind tape, print warning, release tape and
67 try once more. If tape is positioned somewhere, something went
68 wrong, so mark the tape in error and try once more. Previously
69 this error was fatal, now it produces an error message.
70 kes Ensure correct volume name displayed during restore
71 kes Ensure that Volume is mounted for restore.
73 kes Fix a few more Coverity reported problems.
75 kes Apply Allan Black's status dir job count patch.
76 ebl Add information about IMPORT/EXPORT slots in mtx-script.
77 kes Enhance a couple of SD debug messages.
78 kes Tweak unload flag setting and ensure it is set during swap.
80 ebl Fix #1091 about bad output in estimate command.
82 kes Modify autochanger locking to attempt to avoid race
84 kes Make sure device not busy before doing label command.
85 kes Display open() errors except when polling. Previously too
86 many were suppressed. This should fix bug #1070.
87 kes Fix Win32 reparse points. Bacula will not recurse into any
88 reparse point directory, including mount points, unless the
89 directory is explicitly mentioned at the top level (same as
90 with Unix). A file that is linked to another file will be
91 backed up -- much as Unix does for hardlinked files.
94 kes Remove double quotes from ChangeLog and ReleaseNotes
95 kes Remove StorageId test when pruning and recycling (Eric's changes).
96 kes Remove old form of locking when getting volumes -- causes deadlock.
97 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
98 the name unique and to eliminate compile time error.
99 kes Add accurate.o to Win32 FD Makefile
101 kes Fix cats dll build on Win32 after db_update_job_end_record
102 calling sequence change.
103 ebl Switch to tokyo dbm instead of htable in accurate code
104 ebl Include tokyo dbm to bacula source tree
106 kes Fix buffer overruns detected by Coverity.
108 kes Tweak joblog display.
110 kes Implement --without-qwt
111 kes Fix layout of restore tree dialog
112 kes Add configure bat QWT libraries, so that bat can be built
113 with or without the QWT libaries.
115 ebl Add dummy tape driver for regression tests.
116 kes Make sure we unload the right slot when swapping.
118 kes Add debug times, reduce size of two-pool-changer test
120 ebl Tweak autoconf scripts for faketape
122 kes Improve SD reserve debug code.
123 kes Testing an improvement to free up volumes no longer in use.
125 kes Rework SD acquire for read to handle autochanger Volume
127 kes Implement regression that explicitly tests swapping a Volume
128 from one drive to another.
129 kes Enhance disk-changer to detect most error conditions.
130 kes Fix SD code so that it properly swaps a Volume between drives.
131 This fixes bug #1083.
133 kes Apply libdbi patch from Joao Freitas for regress and for
134 Bacula trunk. Regress now works with libdbi. Nice.
135 kes Apply .nobackup patch from bug #1077 submitted by
137 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
138 name into jobs cloned via the run directive.
140 kes Prevent a Volume that is being swapped from being freed from
141 the volume list. This will most likely fix, at least partially,
143 kes Fix strippath so that it does not get a buffer overrun and crash FD.
144 This fixes bug #1078.
145 kes Remove 50 millisec wait in SD that broke debugger.
146 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
147 that a job may run, counted from when the job was scheduled.
148 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
149 a job may block waiting for a resource, counted from when the job starts
150 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
151 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
152 that implements multiple commands per line in the console when using
153 readline. Modify the default to use a semicolon as the command separator.
155 ebl Fix SQL query in migration code.
156 ebl Make accurate mode with hash disk pass regression tests
158 ebl Implement first cut of accurate backup with hash disk.
160 kes Force unload of volume when wrong volume mounted in SD.
162 kes Fix bat seg fault at termination.
163 kes Add Bacula generated version to bat about box.
166 kes Experiment with allowing multiple read jobs.
167 kes Move final volume swapping code to DCR method and
168 call it from acquire_for_read().
169 kes When wrong volume is mounted during read, unload_autochanger.
171 kes Integrate the libdbi changes from Joao Henrique Freitas
173 kes Stop searching for Volumes in SD askdir if DIR returns the
174 same volume name twice in a row.
175 kes Close bat console windows first to eliminate error message
178 kes Tweak the swap Volume from one drive to another code so that
179 it now seems to work.
180 kes Resolve several problems with recycling that broke the new
181 code (these problems are in 2.2.9 as well).
182 kes Remove the volume lock when calling the sysop code.
183 kes Don't mark a reserved volume with no writers as unused otherwise
186 kes Rework class structures for VOLRES, DCR, and DEVICE to make
187 the method names a bit more logical, and for more logically
188 handling the responsibilities.
190 kes Remove redundant code in terminating the scheduler that just
191 causes a seg fault in many cases.
192 kes Cleanup releasing a volume and make it a DCR method.
193 kes Improve algorithm for detecting pre-reserved volume and
196 kes Tweak volume swapping code so it works.
197 kes Correct name overloading in mount.c
198 kes Replace released flag in VOLRES with reserved and add access
199 methods for the VOLRES class.
200 kes Prevent volume from being released while being swapped.
201 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
203 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
205 kes Refactor parts of stored/mount.c
207 ebl Add sanity checks for VolWriteTime and VolReadTime
208 ebl Take care of bad clock changes while computing VolWriteTime
209 and VolReadTime. This should fix or limit #1066
210 kes Correct error string numbers in dird/catreq.c
211 kes Restructure reserving, acquiring, and mounting volumes. Calls to
212 autochanger are deferred for mount.c -- simplifes the code.
214 kes Do not prune any running job. It just fails the job.
215 kes Lock the volumes when changing dev->reserved_device and marking
216 the volume unused otherwise the device can get reserved by
217 another job before the volume is released, thus blocking it.
219 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
220 kes Fix bug #1063, reuse of freed ptr in list nextvol.
221 kes Release regex compile buffer in filed/job.c
222 kes Add proper type of const char in sql_create.c
223 kes Turn off debug in daemon termination routines
224 kes Move free_volume_list() before devices are freed in stored.c
225 kes Fix reference to uninitalized stack variables in bregex.c.
226 This should correct bug #1067.
228 kes Fix possible seg fault in SD when freeing a volume entry.
230 kes Implement unload_dev() before swap device.
231 ebl Add statistics prunning with option and menu
232 kes Separate unload_dev() from unload_other_device() in autochanger.c
234 kes Apply patch from bug #1069 that corrects spurious error messages
235 when ACLs enabled on SGI but no ACL exists.
236 ebl Fix small segfault in bacula-sd when debug level is 500
237 kes Modify run_program() and run_program_full_output() to use
238 call by reference for the results string. This corrects a long
239 standing problem where the address of the string may be changed
240 in the subroutine but not in the calling program.
242 kes Re-enable code to remember last volume mounted on a non-tape
244 kes Add patch supplied in bug #1068 that fixes a SD crash when using
245 a Virtual autochanger.
246 kes Generate correct JobMedia records during spooling/despooling when
247 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
248 <tih@hamartun.priv.no> for excellent analysis and testing.
250 kes Tweak hash algorithm for htable using Martin Simmons idea
251 for doing a circular shift.
252 kes Remember what volume is in VTLs (previously turned off for
254 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
255 pointed out some problems in creating JobMedia records during
256 spooling with concurrent jobs. Fix the problem by updating the
257 start file position before despooling and generate a jobmedia
258 record at the end of despooling.
260 kes Fix handling of JobMedia records during spooling and when a
261 Volume is changed without actually writing data to the Volume.
263 kes Rework certain SD locking based on gdb tracebacks of deadlocks
264 sent by Eric. This code now uses only the volume_lock() rather
265 than the reservations lock when at EOM and acquiring a new
267 kes Ensure only one exit point in several subroutines.
269 kes Implement bsock code to permit locking. Use the new code in Verify
270 in the FD to prevent the heartbeat thread from disrupting the Verify
271 data sent to the Dir.
272 kes Modify SD locking to eliminate locking the reservations system from
273 outside the system. Use the volume lock when getting media data
274 and reserving a new volume at end of media.
275 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
276 when SD starts are not locked into place.
278 kes Fix error compiling runscript code on 64 bit machines.
279 kes Tweak Win32 mount point code.
280 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
281 cleared giving bad file estimate).
282 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
285 kes Keep Schedule run lists in order as suggested by
288 kes Implement autostart scripts for Debian.
289 ebl Implement upgrade catalog scripts.
291 ebl Apply jobstat patch for long term statistics. Have to implement
292 purge stats command and upgrade scripts.
293 kes Fix mtx-changer.in for broken Debian mt program.
295 kes Fix large number of JobMedia records reported by Eric Bollengier.
297 kes Apply doc fix from bug #1062.
298 kes Resolve crash and improper restore wx-console Win32 restore
299 GUI. Fixes bug #1065.
300 kes Update Win32 wxWidgets to latest version.
301 kes Attempt to do correct handling of Win32 mount points. Should
303 kes Fix Win32 FD backup/restore memory leak due to improper termination
304 of BackupRead/Write. This fixes bug# 1038.
306 ebl Reduce memory usage for accurate backup, working only with ctime
307 and mtime. (not all Lstat field)
308 About 40MB for my linux system (400.000 files)
310 kes Add dcr->reserved_volume flag that allows us to release a volume
311 even if it is not vol->released. This allows maxvol2 to work when
312 Volumes expire and we are already writing to the device (i.e. a
313 volume is pulled out from under us by another job terminating after
314 we reserve the drive).
316 ebl Permit multiple command/console per runscript definition.
317 RunScript { command = /bin/true ; command = /bin/false ... }
318 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
319 (restart an application) just after the VSS snapshot on windows.
320 kes Don't zap dcr values during release_volume() as they might
321 have the next Volume to be mounted.
322 kes Fix AIX prototype.
324 kes Second cut of drive switching during backup.
327 kes Update Win32 version of wxWidgets to most recent version.
328 kes Tweak Copy job details.
329 kes Rework dir_find_next_appendable_volume to make a bit more effort
330 to find a suitable volume before giving up.
332 kes Make ask_sysop_to_create... to return if waken from wait.
333 This helps get out of blocked conditions.
334 kes Experimental implementation of switch_device in reservations.
335 kes Implement FD version to allow easier protocol changes.
336 kes Add Plugin Options string -- not yet passed to FD.
337 kes Implement PluginOptions ACL.
339 kes Attempt to correct problems with restores with autochangers and
340 use counts going negative
341 kes Rework SD status command and implement API for bat. Implements
342 header, runing waitreservation, devices, volumes, spooling,
343 and terminated status keywords.
344 .status storage=xxx <keyword>
345 kes Clarify TLS error message by adding double quotes around name.
346 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
347 kes Pass jcr to tls routines so debug messages can be handled better.
348 kes Rework jobq resource allocation code, and possibly fix a bug
349 that caused reference counts to get out of sync.
351 kes Rename fd/dir plugin to use Bacula standard underscore.
352 kes Plugin work -- bring dir up to fd level.
353 kes Start implementation of VTL code
354 kes Fix Win32 build after adding new cats subroutine.
356 kes First cut at Duplicate Job implementation.
358 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
359 kes Start PluginOptions string, and refactor a bit of ua_run.c
360 ebl Apply Allan patch that permit to reset recyclepool.
362 kes Test patch -- possible fix or improvement for bug #1053
363 kes Refactor FD and SD status commands to permit new API code in
364 SD, and to fix Win32 build.
365 kes Win32 build is now working.
367 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
368 some ideas in patch from Scott Bailey.
369 kes Begin implementation of duplicate Job control.
370 kes Fix some of Win32 build after recent additions.
371 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
372 which causes the FD to detect whether or not the OS has the
373 honor no dump bit (*BSD systems), and if so, to skip backing up
374 any file with this bit set. The feature is enabled by setting
375 'honor no dump flag = yes' in the Options section of a FileSet.
377 kes Correct po warning message with datarootdir
378 kes Implement more code in dird.c to put configuration parsing in
379 a class rather than use globals.
380 kes Restructure SD status command for implementation of bat API
383 kes Suppress incorrect 'Will not descend from x into y' messages.
384 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
385 daemon globals used by parser.
386 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
388 kes Fix free of plugin_list when none exists.
390 ebl Apply accurate project patch.
392 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
393 on non-mempool object)
394 kes First cut of converting FD .status to work with bat API.
396 .status client=XXX header
397 .status client=XXX running
398 .status client=XXX terminated
399 kes Implement first cut of Copy Job.
400 kes Implement Catalog in Pool resource. It overrides catalog specified
401 in the Client resource.
403 kes Apply patch (with some difficulties) from Joao Henrique Freitas
404 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
406 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
407 ftruncate() actually works. In the case of some (cheap) NAS devices,
408 it does not, and so recycling NAS Volumes does not work. The code
409 simply unlink()s the file, then recreates it. This fixes bug #1011.
411 kes First incomplete cut of big malloc blocks for htable.
412 kes Tweak plugin code.
414 kes Plugin debug code + tweak a couple bat dialog layouts
416 kes Fix creating first JobMedia record during Migration to include
417 proper index. This caused slow restores of migrated jobs.
418 kes Temp fix to plugin name file_index.
419 kes Bacula backed up and restored a MySQL database.
421 kes Implement plugin restore.
422 kes Implement parsing of db_driver to give db_type index.
424 kes First cut of plugin restore code.
425 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
426 and do not strip paths on symbolic links.
427 kes Set catalog backup database and user name from values specified on
428 the ./configure line.
429 ebl Fix #1031 about wrong pool source information in job report.
432 kes Remove a redundant jcr argument to find_files, match_files, and
434 kes Implement '.status dir header|scheduled|running|terminated' that
435 prints the requested status section. With the exception of the
436 header, the other reports have fields separated by tabs (\t).
438 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
439 a resource embedded run command to find a since time if no explicit
440 since time was supplied on the command line.
441 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
442 that updates the state file at job termination time in addition to
443 when the daemon terminates.
445 kes First version where a plugin did a backup.
446 bpipe-fd.so created a backup file, wrote a test
447 string to it, and Bacua could restore this fabricated file.
449 kes Implement DB Driver = string for the DBI driver.
450 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
451 kes First cut of code for loading Win32 plugin dlls. Implement
452 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
453 and implement a dlfcn.h file based on opengroup's definitions of
456 kes First cut plugin directives.
458 kes Apply patch from bug #1049 to prevent stripping the path on a
460 kes Attempt to fix bug #1047 where stripping a path corrupts the
461 heap. Waiting for feedback.
462 kes Correct the Mount message not to suggest labeling a new tape
463 when doing a restore. Submitted by email by John Stoffel.
464 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
465 FD by using casting. Reported in bug #1042.
467 kes A bit of crypto cleanup. More later.
469 Release Version 2.2.8
471 kes Apply patch from Martin to correct bug #1040, bscan sets existing
473 kes Fixed important spelling error in doc -- bug #1045.
475 ebl Fix bextract to be able to extract non-portable Win32 data to
477 kes Move initialization of read/write res lock earlier in the code.
478 This fixes the crash with a null conf file. This fixes bug
480 kes Redefine CURES in lib/parse_conf to be URES and move it all
481 into lib/parse_conf.c -- this responds to bug #1042, but does
482 not fix it. The fix is not to compile with FORTIFY_SOURCE.
483 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
484 the trunk SVN. I don't think this was reported as a bug.
486 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
488 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
490 kes Add DataDespooling and DataCommitting status (committing is
491 the last despooling).
492 kes Finish implementation of new reservations code noted below.
494 kes Fix bsnprintf for float point numbers. I broke recently when
495 parameterizing some variables. This fixes bug #1036.
496 kes Undo recent reservations changes ... will apply them later
497 when they work better.
499 ebl Fixes #1034 which cause mysql to hang the connection after 8h
500 ebl Change default statistics target of filename.name and path.path
501 fields for PostgreSQL. This speeds lookup by indexes. Thanks
503 kes A few more tweaks to new reservation code. Make sure to clear
504 vol released flag when retaking volume. When reading label and
505 label is bad mark volume unused. When recycling, mark volume
506 unused so it can be renamed.
508 kes Fix reserve_volume() so it doesn't release a volume in use
509 (i.e. a volume entry not marked released). This should be
510 the last part needed to fix bug #1018.
512 kes Move Heartbeat documentation from Job to Director resource.
513 This fixes bug #1033.
515 kes Fix existing switch drive SD code to call autochanger to release
516 any old volume. This must be done to keep the autochanger from
517 releasing subsequently newly reserved volumes in doing a close().
518 This should fix bug #1018.
519 kes Fail if attempting to get console input in batch mode. This
520 should help fail RunScript console commands that are incomplete.
521 kes First cut implementing switch_drive() in SD (not actually called).
523 kes Implement first cut running console commands in a RunScript.
525 ebl Fixes bug #1028 where 'Selection Type' option was not usable
527 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
530 Release Version 2.2.7
532 kes Add new free_tls() entry point so that Win32 builds.
533 kes Fix compile warning in src/lib/util.c
534 kes Fix entry point for edit_job_codes() so that Win32 builds.
535 kes Fix seg fault Frank Sweetser reports in regression testing
536 on his systems. The problem was that the original author of
537 bsnprintf.c did not take into account the side effects of
538 using ++x in the argument to a #define.
539 kes Make SD protocol backward compatible with version 2.2.x.
541 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
542 because Bacula no longer restores sockets.
543 ebl Always use ignorecase fileset option on win32 FD.
545 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
546 that implements double quoting include names in conf files,
547 and also allows piping input by having the first character
548 be a vertical bar (|).
549 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
550 that implement %f in RunScripts to pass the FileSet name.
551 kes Skip leading | when lex input comes from a pipe as suggested
552 by Michael Stapelberg <michael@stapelberg.de>.
554 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
555 Nerijus Baliunas <nerijus@users.sourceforge.net>
557 kes Implement Plugin Directory and plugin events.
559 kes Implement a security enhancement: TLS authentication but no
560 encryption. Enabled by setting 'TLS Authentication = yes'.
561 Note when this is on, TLS encryption is turned OFF!
563 kes This patch corrects a problem where the maximum concurrent storage
564 jobs counter gets out of sync during restore jobs causing jobs to
565 'wait on max Storage jobs'. This patch fixes bug #1009.
567 kes This patch fixes bcopy so that it produces correct Volumes.
569 kes This patch eliminates spurious output to the console during a VerifyVolume
570 job that contains encrypted data. It fixes bug #1024.
572 kes This patch prevents the 'status dir' command from trying to use a scratch
573 volume and possibly moving it from one pool to another. This patch fixes
576 kes Add new include to postgresql.c suggested by Marc Cousins so
577 that it compiles correctly with pgre version 8.3.
579 kes Fix --archivedir addition to configure. Replace it with
580 --with-archivedir in configure.in This fixes the regression
582 kes This patch fixes bug #1012 where the job is canceled because
583 of Max Run Time exceeded when the job has not yet started.
585 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
586 one 'part' to write. Instead of each part being stored on disk,
587 written to DVD, then deleted from disk, all parts are written to disk,
588 and only the last is written and deleted from disk.
589 kes This patch fixes the status command to include the formating string for
590 JS_AttrInsterting. It fixes bug #1021.
591 kes This patch should fix the Mac OS X build problem on the latest
592 Darwin, where sys/types.h was not included correctly (apparently
593 due to a change in the Mac headers). The solution was to explicitly
594 ensure that it is defined for the ./configure.
595 This patch also has a rebuild of configure that includes the Debian
596 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
597 kes This patch should ensure that queued messages to the console are
598 displayed as soon as possible. It should fix bug 1007, but has been
599 reported not to work.
601 kes This patch fixes the infinite loop when trying to increase the
602 maximum number of volumes in a Pool during the add command.
603 This patch fixes bug #1008.
605 Release Version 2.2.6
607 db Remove extra data on estimate command in joblist for bat.
609 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
610 really change anything, but is the beginning of doing it *right*.
611 To do it completely right the LastWritten date must be passed to
612 the SD, but it is not yet done.
613 kes Minor tweaks to some bat restore SQL.
614 kes This patch fixes bug #1003 where putting the message output from
615 a Verify job into the catalog results in a recursive loop. The problem
616 seems to show up only with postgresql (to be verified).
617 kes Correct %x to %p in postgresql debug statement.
619 kes Fix bug #942 where lots of emails where generated when the heartbeat
620 interval was low and Bacula wanted a different tape from the one in
623 ebl Add new SD despooling attributes and Dir inserting attributes
624 job status codes in the catalog (Status table).
626 ebl Use qmake-qt4 instead of qmake when available (debian system).
628 kes Add a security warning to src/cats/make_catalog_backup.in indicating
629 that passing the password via the command line (arg 3) is insecure.
630 This responds to bug #990 (it doesn't fix it).
632 kes Set default debug_level to zero. This corrects bugs #991 and #993.
633 kes Fix a crash in bat when it cannot connect to the Director for example
634 if the Director is not running.
635 kes Remove redundant INDEX (JobId) from File table in the trunk.
637 kes Make explicit exception to GPL in LICENSE to permit linking
638 the Win32 FD with Microsoft VSS code.
639 kes Apply the Solaris package patch from
640 Masopust, Christian <christian.masopust@siemens.com>
641 kes Apply the patch to optionally add a timestamp in the debug output
642 submitted by Mariusz Czulada <manieq@wp.eu>.
644 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
645 backend (sql_strerror). Fixes bug #989
647 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
648 It applied with no problems.
649 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
651 kes Redirect stderror to stdin on mt status command in mtx-changer.in
652 since the status is returned on stderr on Solaris.
653 kes Activate Close button on tray-monitor window. This fixes
655 kes Check for NULL item in parse_conf.c before calling it. In the
656 case of Device, there is no item and this caused a seg fault when
657 Device appears in the conf file.
658 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
659 avoids pulling in config.h multiple times in some new code.
661 kes Fix spurious warning message printed when creating a volume with
662 a LabelFormat. This fixes bug #976.
664 Release Version 2.2.5
666 kes Add JobId in place of Job name in all the Jmsg() output.
667 kes Correct the APP_DESC for the Win32 storage service (remove an e).
669 kes Make maxvol-test and new more strict maxvol2-test work.
670 kes Print JobId in all Jmsg() job output.
672 kes Add new SD despooling attributes and Dir inserting attributes
673 job status codes. This fixes bug 961.
674 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
676 kes Fix doc issue. This fixes bug #963.
677 kes Fix listing performance problems in bat. Pointed out by
679 kes Remove old debug code.
680 kes Fix bat code that tests for Win32. This should fix bug #968
681 kes Query 5 list wrong Vol after migration. This fixes bug #960
683 ebl Fix #969 where user can't change Replace option in restore menu.
685 kes Save jcr in thread specific data (tsd) for each thread.
686 kes Make Dmsg() print JobId as -%u.
687 kes Make Jmsg, Emsg, and others automatically pickup the jobid
688 for the thread if it exists.
689 kes Remove old reservation debug jid code.
690 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
691 ebl Add an option that permit to specify spool size in job
692 definition. (Applying patches/testing/spoolsize_per_job.patch).
693 You must upgrade SD and DIR at the same time.
694 dvl Add new configuration item --archivedir
695 dvl Adjust regression tests to use tmp not /tmp. This will allow
696 multiple concurrent runs of the regression tests.
698 kes Fix race condition that drops final block written to volume.
699 This happens in rare cases with multiple simultaneous jobs
700 when the Volume fills. This fixes bug #964. May be related
701 to bug #935 and possibly #903.
702 kes Eliminate more strerror() and replace with bstrerror().
703 kes Remove BSD getopt and replace with unrestricted IBM version.
704 kes Fix Win32 build for changed calling sequences.
705 kes More tweaks to the mount volume routines to get everything
706 right. Changed variable name from find to have_vol, which is
707 much easier to understand.
708 kes Enhance btimer debug code.
710 kes Fix FD->SD authorization failure, which was due to spurious
711 wakeups from a pthread_cond_timedwait(). Simply check the
712 predicate before continuing. This fixes bug #953.
713 kes Add const char where needed (more to do). Remove temp debug code.
715 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
716 kes Don't overwrite error message in check_tables_version.
718 kes Unlock batch insert tables with same calls used elsewhere.
719 kes Allow starting 59 jobs a second.
720 kes Make SD session key more random.
721 kes Add retry for SQLite opening db if it fails. Probably helps
723 kes Suppress extra error messages during batch insert failure.
725 kes Add jcr to timer packets so if killed message can be sent to job.
726 kes Add JobId to all Dmsg() output.
727 kes Put some FD auth code on dbglvl rather than fixed.
728 kes Return insert attributes error message in db msg buffer to avoid
729 false error messages. Helps fix bug #966.
730 kes Separate batch init error messages. Probably helps fix bug #966.
731 kes Make SD code that contructs attribute insert check string lengths
733 kes If Dir gets an error during inserting attributes, cancel SD.
734 This reduces unnecessary error messages.
736 kes Correct search boolean for getting Volume info
737 ebl Cleanup batch insert code. Probably fixes bug #965.
738 kes Back out one small change to the reservation system (reserving a volume).
739 kes Rework how a Volume is mounted. It is now much more intelligent and
740 will always attempt to use any mounted volume if possible and reduces
741 calls to the Director asking about volumes.
743 kes Turn off some code when batch insert not enabled.
744 kes Edit FD name in connect error messages.
745 kes Rework the reservation system to take into account that the Director
746 might give us a Volume that is different from the current one being
747 used, and to ensure that we don't exceed Maximum Volume Jobs.
748 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
749 fatal error with multiple jobs running'
750 kes Add more debug code in reservation system.
751 kes Implement maxvol-test to check bug #947.
753 kes Add code to handle tray monitor separated from Win32 FD.
754 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
756 kes Add missed return in fixing verify bug -- trunk only.
757 ebl Fix a command parser issue causing a director segfault.
758 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
760 kes Increase the max block size to 4MB fixes bug #957.
761 kes ERABT if user sets min block size > max block size. Fixes bug #956.
762 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
763 is not properly mounted (recognized) during a poll.
764 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
765 Job that has differences reports Verify OK.
766 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
768 ebl Add an option to operate on all pools with update vol parameters.
769 This complete the project 20. Patch from Nigel Stepp.
770 ebl Add history support to bconsole when using readline.
771 Using Ctrl-D to exit doesn't update .bconsole_history
772 kes Modify new volume algorithm to use max MediaId for generating next
773 volume number rather than the count of Volumes. This should essentially
774 eliminate the failure rate if some volumes were deleted. Bug #921.
775 kes Begin implemention of Optimize Job Scheduling.
776 kes Implement restore callback that Dirk and I agreed on for bat
777 restore. This fixes bug #928. Restore of backup of zero files fails.
778 kes Fix SQL Catalog logging which broke with new db_escape_string
781 Release Version 2.2.4
783 kes Fix bacula_cats.def for new db_escape_string().
784 kes Increase size of name string when FD making connection to SD.
785 May fix bug #953. FD->SD connection failure.
787 kes Add code to help Dan debug 2drive-incremental-2disk test.
788 kes Add code to try to fix bug #908.
789 kes Add waits to multiple exit detection code to try to force pid
790 file to always be deleted.
791 kes Restore good dev.tar.gz to rescue set appropriate binary property.
793 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
794 trying to switch drives by checking for blocking before unblocking.
796 kes Cancel storage daemon in all cases where FD reports error. This
797 should fix virtually all cases of bug #920.
798 kes Fix db_escape_string() for MySQL which did not compile.
800 kes Fix error message that was clobbered when Dir tells SD it does not
801 have write permission on Volume. This should fix a minor point
802 in bug #942, but not the main problem.
803 kes Add code to cancel job in SD if FD connection fails. This should
805 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
806 dvl Pass jcr and db into db_escape_string() to enable better escaping
808 kes Fix migration code to get correct Volume name with multiple volumes
809 by skipping |. Fixes bug #936.
810 kes Implement patch supplied by Landon to fix bug #944 where using
811 TLS with bconsole uses 99+% of the CPU.
812 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
814 kes Move patches into patches directory.
816 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
819 ebl Using 'm' in bconsole will show messages like before,
820 and not memory usage.
821 kes Fix bug #935, and probably also bug #903 where files were not
822 restored. MediaId was not properly set in JobMedia record after
825 kes Suppress chown and chmod error messages if the FD is not running
828 kes Apply Martin Simmons' patch that should turn off the new API usage
829 when batch insert is turned off allowing building on older
831 kes Add ./configure search in qwt-qt4 for qwt package
833 kes Bacula is now free of 3rd party GPL copyrighted code!
835 kes Add guid_to_name.c/h which replace idcache.
836 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
838 ebl Detect if new PosgreSQL batch insert API is present.
839 kes Correct incorrect mempool call causing Director crash. Occurs on
840 systems without va_copy().
841 sb Update spec files for 2.2.1 release
843 kes Fix memory pool call in ua_output.c. bug #934.
844 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
845 Add test program to fnmatch.c
847 kes Integrate patch to README.vc8 from
848 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
849 edit it to get it into Unix patch format.
850 kes Implement mkpath.c to replace old FSF makepath.c
852 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
854 Release Version 2.2.1
856 kes Update POTFILES.in
857 kes Cleanup a few underquoted AC_DEFUNs in configure
858 kes Apply patch from Martin Simmons that adds a test for va_copy to
861 kes Fix bug #921 by increasing the number of tries to create a new volume
863 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
864 can be called multiple times. Implement a version for machines
865 without va_copy() that gets a big buffer.
867 kes Integrate more portable zone offset code into bsmtp.c
868 Submitted by Attila Fülöp.
870 kes Fix bad SD->FD return status reported by
871 (James Harper) <james.harper@bendigoit.com.au>
872 ebl Fix a bug in read_close_session which return random status
873 thanks to James Harper
875 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
876 and directory names during restore of single file/directories.
877 kes Add sanity checks to .sql command when string is empty. Hopefully
878 that will resolve Dirks Director crash.
880 kes Apply patch submitted by Martin Simmons that corrects a seg fault
881 in the bsmtp chat subroutine when debug is >= 10.
883 kes Fix Director crash when running bat SQL queries.
884 kes Add David's notes on Item 8: Copy pools.
886 kes Rework projects file to be current and ready for a vote.
887 kes Enhance lex scanner error message.
889 kes Tweak LICENSE file to mention BSD code.
890 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
891 if specified on the ./configure.
892 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
893 This class is intended to allow us to open a second bsock to the
894 Director while in the restore subdialog.
896 kes Fix configure to create bat Makefile before creating dependencies.
897 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
898 kes Add a tooltip to the tray monitor.
899 dvl Set the Director's PID file before dropping privs. This fixes
902 kes Update AUTHORs file
903 kes Increase the default max concurrent jobs to 20 in FD and SD to
904 correspond with the default .conf files.
905 kes Rewrite the Win32 service routines. This eliminates the 3 copies
906 some different, of the same file created by RN when porting the
908 kes Rearrange some of the Win32 directories and the placement of the files
910 kes Set DEVELOPER flag in version.h
912 ========================================================================
913 Release Version 2.2.0
915 kes Apply a second doc patch from Marc.
916 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
917 improves the tips section that discusses how to setup multiple
920 kes Update bat README file.
921 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
922 corrects a typo in the Recycle status check in db_find_next_volume().
923 This will probably fix a number of annoying problems with multiple
925 kes Modify most of dird/msgchan.c to use bsock class calls rather than
926 bnet calls -- no functionality change.
928 kes Modify the Verify output to specify if files are missing on
929 the Volume(s) or disk. Fixes confusion in bug #916.
930 kes When more than one Volume is read in a migration job, the last
931 Volume bytes reported are from the last read volume rather than
932 the last written volume. Fixed. This fixes bug #910.
933 kes Fix display of Recycle flag after update volume=foo recycle=yes.
934 It previously printed New Recyle flag is: no. This fixes bug
937 kes Correct seg fault when switching tape drives during restore.
938 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
939 be used until after 2.2.0 release.
941 kes Remove fnmatch() in SD that permitted wild card specifications.
944 kes Fix %g in filename returned by SQL for browse tree reported by
946 kes Fix configure so that it puts config.out in the cwd rather than
948 kes Attempt to fix the locking problem reported by Eric in bug #906.
949 kes Make berrno class to leave errno unchanged after constructor call.
950 kes Make bnet_server use the heap rather than the stack to allocate
951 its socket fd pointers to avoid a crash at termination. Problem
952 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
954 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
955 and putting it in depkgs-qt along with Qt4.3.
957 kes Rework code in acquire.c that switches drives for reading when
958 the Media Type does not match. This should fix bug #906
960 ebl Fix a director segfault during job setup #907
961 kes Correct seg fault in postgresql when first operation returns no
962 rows. Fixes Dirks File browser problem seg fault with bat.
964 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
965 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
968 kes Implement PopUp YES/NO dialog for bat.
970 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
972 kes Correct RunScript to terminate job in FD on failure.
973 kes Change abort_on_error and AbortJobOnError to fail_on_error
974 and FailJobOnError in RunScripts.
975 kes Minor tweaks of code formating in RunScripts, principally to
976 avoid depassing 80 columns.
978 kes Eliminate one #ifdef Win32 in bsmtp
979 kes Implement grow tool to grow a file for testing very large databases.
980 kes Add big-vol-test to test Bacula seeking with > 5GB.
983 kes Modify find_next_volume() to return all values in Media record.
984 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
988 kes Update Release notes
990 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
991 Warning, in previous beta version, all media get from scratch keep their
994 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
995 This should fix bug #842. Made a note to look at removing the temp
996 files at the end of the install.
997 kes Add ability to mount and unmount a file device providing it is
998 marked as being removable and has the appropriate mount and unmount
999 commands defined in the Device resource. This fixes bug #830.
1000 kes When applying a storage override, release all previous storage
1001 definitions rather than just prepending the new storage.
1002 This should prevent a good deal of confusion.
1004 kes Implement ./configure search for qwt libraries.
1006 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1007 Win32 FD. This should fix bug #893.
1008 kes Remove an unnecessary beep in Win32 init code.
1009 kes Update copyright dates in Win32 executable about boxes.
1010 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1011 code with a BSD getopt.c and getopt.h.
1012 kes Remove sched.h from the Win32 compat directory -- not used.
1013 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1014 need to shut it down, do it through the services panel or the command
1016 kes Remove some inappropriate Bacula FSFE copyrights.
1017 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1018 kes Fix regress config non-portable test as pointed out by
1019 Florian Heigl <florian.heigl@gmail.com>
1020 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1021 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1023 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1024 Reported by Frank Sweetser.
1028 kes Fix client-only build.
1029 kes Integrate client-only fixes for bsys (initgroups) and conio from
1030 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1031 kes Make arguments to get_scratch_volume() in same order as other
1033 kes Rework the prune_volumes() subroutine so that after purging and
1034 no volume found in desired pool, it will check for a scratch
1035 volume. This prevents recycling the whole scratch pool.
1036 kes Add code to status storage to print boffset_t (largefile support).
1038 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1039 kes You now need a --with-qwt=<dir> to be able to build bat.
1040 kes Update src/win32/cats/bacula_cats.def to include the new
1041 db_get_query_dbids() call on Win32.
1043 kes Correct a problem when selecting a scratch volume and moving
1044 it to another pool that lost some columns.
1045 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1046 kes Enhance Autochanger error messages to include Volume and device name.
1047 kes Rework prune_volumes() code to take account of InChanger flag,
1048 and to handle recycling volumes going to the Scratch pool and
1049 current pool because the RecyclePool directive.
1050 kes Implement a better and more efficient db_get_query_dbids() to
1051 handle creating and passing back a list of DBIds.
1055 kes Start work on new more efficient DBId subroutine. First use
1056 will be for recycling volume to Scratch inchanger.
1057 kes Increase number of JobIds in pruning from 1000 to 10000.
1058 This to be replaced by above routine.
1059 kes Begin implementation of building Qt4 on Win32.
1060 kes Correct typo in fix I added for bad TLS shutdown.
1061 kes Pull 2.0.3 patches into patches directory.
1062 kes Update Release notes. Include qt-console in line count.
1063 kes Update Projects file.
1065 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1066 bug in migration code where a job that spanned two volumes
1069 kes Implement new BST_DESPOOLING blocked state. Change from locking
1070 during despooling in SD to blocking. This means that other threads
1071 can work with the device structure, in particular the reservations
1072 system while despooling.
1074 kes Fix return in reservation message queue that missed clearing
1075 the jcr lock (implemented 26Jun07 below).
1076 kes Rename a number of dev methods to make locking function names
1078 kes Document locking in lock.c. Move lock structures to new file
1081 kes Move reservations message lock to lock jcr only this
1083 kes Move main SD locking code into lock.c (new file).
1084 kes Update Win32 build to include lock.c
1088 kes Dirk committed the qwt library code for drawing graphs in bat.
1089 kes Tweak install of qwt so that it is integrated with ./configure.
1091 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1092 out by Eric (my typo).
1093 ebl Fix configure.in to get batch mode enable
1094 kes Return correct string from authenticate.cpp in bat when connecting
1096 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1097 spurious line drops when using TLS.
1098 kes Do not file reparse points when restoring a file that already
1101 kes Implement Windows reparse points -- similar to directories, but
1102 we do not descend into it. This is a first cut. They seem to
1103 be backed up, but restore is not yet tested.
1104 kes Remove restore_blocking in tls code when shutting a socket to leave
1105 it in blocking mode. Hopefully this will fix the encryption bug
1106 reported by Frank Sweetser.
1107 kes When opening a file for backup, tell the OS that we are going to
1108 read it sequentially -- optimization.
1109 kes Change variable names in authenticate_director() to not conflict
1110 with member names in bat. Caused great confusion with compiler,
1113 kes Queue openssl error messages in case of comm problem.
1114 kes Do shutdown() call if socket terminated.
1115 kes Remove some duplicated code in tls.c
1116 kes Move more of the bsock member variables into private and access
1118 kes Add Frank Sweetser's tls-test to the regression suite.
1120 kes Add Swedish sv.po file
1122 kes Don't print clock skew message in FD if less than 3 seconds diff.
1123 kes Add a bit of VSS info to status client.
1124 kes Implement a first cut of Vista VSS, using Win2003 code.
1126 Release: 2.1.20 beta
1128 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1129 loaded tape but uses first drive).
1130 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1131 This was indeed a Win32 issue.
1133 kes Simplify search of autochanger for in-use Volume.
1134 kes Fix exit condition of check for in-use volume. kes Remove
1135 inappropriate my_postgresql_free_result() in db_close()
1137 kes Fix bad return in FD when encryption signature not found.
1138 Probably caused a crash.
1139 kes Inhibit missing encryption signature error messages for
1140 file types where no signature computed.
1141 kes Correct inverted check on autochanger in reservation system.
1142 kes Tweak debug code in autochanger reservation.
1144 kes Add some additional locking in the cats directory in subroutines
1145 that modify packet variables called from batch insert.
1146 kes Rework how dcrs are allocated. new_dcr() can now be called
1147 with an existing pointer, and it will simply clean it up.
1148 This allows the reservation system to test various different
1149 devices, and will permit easy device changes.
1150 kes A bunch of changes all over to handle new new_dcr() calling
1152 kes Work more on the Volume management in the SD. Remember Volumes
1153 for tape drives and for autochangers (even virtual disk changers).
1154 kes When looking at the Volume list to reserve a drive, handle
1155 autochanger names correctly by interating through the changer
1156 devices. Also call the Director to see if a Volume is suitable
1157 for the current job.
1158 kes Fix some bugs in bscan. Make sure all media records are written.
1159 Make sure that valid JobMedia records are written for disk files.
1160 Previously they were completely wrong.
1161 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1162 that the URLs don't change and so that the developers will all
1163 work off the same copy. Rebuild from scrach.
1164 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1166 Release: 2.1.18 beta
1168 kes Fix seg fault in FD from incorrect digest size.
1169 kes Fix argument to non-OpenSSL crypto.c subroutine.
1171 Release: 2.1.16 beta
1173 kes Remove a few malloc()s from the encryption code.
1174 kes Use the class calls to bsock in filed/backup.c and restore.c in
1175 place of the old bnet_xxx code.
1176 kes Implement code that does an on the fly calculation of the
1177 signing digest during restore of encrypted files. It makes
1178 a best guess at the algorithm, and if it is not correct, will
1179 then revert to the old code which reads the file after it is
1181 kes Implement at least one missing crypto stream in stream_to_ascii()
1182 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1183 #877 where a reload with bad syntax causes Dir to exit.
1185 Cut: 2.1.14 beta (not released)
1187 kes Do not free a volume on a tape drive until another volume is
1188 mounted and read, or the autochanger unloads the volume.
1189 This should help the SD re-use volumes that are already mounted,
1190 and should fix bug #886.
1191 kes Apply patch from user brettedgar that allows gnome2-console include
1192 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1193 kes Apply patch from Lucien Weller that fixes day of week calculation
1194 because of DST flag problem. Fixes bug #887.
1196 kes Move find_next_appendable_volume() to after acquiring a valid device
1197 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1199 kes Unable to reproduce bug 872. However added additional testing for
1201 kes Bug #874 resolved by documenting SQLite limitations.
1202 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1203 kes Bug #881 resolved by removing typo in mtx-changer script.
1204 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1205 approval. Added a link to the wiki on the web page, and implemented
1206 a backup from http://paramount.ind.wpi.edu
1208 kes Fix update allfrompool to pass pool name.
1210 kes Convert to pure GPL v2 license.
1211 kes Fix sscanf problems reported by Peter Buschman that caused
1212 a bus error on Solaris.
1213 kes Rework (simplify) the select prompt in bat.
1214 kes Move get_jobid_from_tid() into lib and create a
1216 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1217 should definitely fix the problem of lost error messages in the
1219 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1220 kes Eliminate tcpd.h from the project. Enclose the #include from the
1221 library with extern C ...
1222 kes Add print of signal name when a signal is trapped.
1224 Release: 2.1.12 beta
1226 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1228 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1229 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1230 makes SQLit3 run 30 times faster, though a bit less safe.
1231 kes Implement --with-batch-insert in configure and detection of thread
1232 safe libraries. It is on by default, but turned off if no thread
1233 safe library (e.g. SQLite 2) is available.
1235 kes Fix Bacula PostgreSQL buffer overruns.
1236 kes Do better checking for NULL results returned from PostgreSQL;
1237 implement retry for failed queries; clear results buffer after
1238 failed query. Hopefully this will correct the PostgreSQL failures.
1240 kes Implement algorithm to handle only one appendable volume with
1241 Prefer Mounted Volumes = no.
1242 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1243 returned from a query.
1244 kes Make volume lock recursive.
1245 kes Implement an additional volume reservation algorithm that
1246 starts by considering all reserved volumes then uses the
1247 old brute force algorithm of searching the resources to
1248 find a suitable device.
1249 kes Add new reservations debug code and refine the old code.
1250 kes Update the win32/dll/bacula.defs file.
1252 kes Tweak reservations algorithm to permit a few more cases, i.e.
1253 volume reserved, but on different drive, ...
1254 kes Enhance SD status to include Pool and Media Type for drive in a
1255 more readable format (a bit longer).
1256 kes Fix PostgreSQL double free.
1258 kes Minor refactoring of restore decryption code.
1259 kes Add code to smartall.c to detect double free of a buffer.
1261 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1262 so that bsmtp will create a correct email address (mailbox only).
1263 kes Modify 'memory' command so that the buffers are listed as 'In use'
1264 to avoid confusion with Orphaned buffers.
1265 kes I reworked the OpenSSL include/lib flags to be handled in
1266 the standard Bacula way, which should fix bug #863 concerning
1267 non-standard OpenSSL libraries.
1269 kes Implement Help Browser window for bat.
1270 kes Fix reload bug that reset StorageId to zero.
1272 kes Fix TLS #ifdefing when TLS turned off.
1273 kes Ensure that when labelling a tape with Slot=0 that InChanger
1275 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1277 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1278 add DISTINCT (required by PostgreSQL).
1279 kes Implement BSOCK authenticate_director() method. Eventually will
1280 authenicate all daemons.
1281 kes Move several more functions into the BSOCK class.
1283 kes Add code to tell the OS that we no longer need a cached
1284 file that we were reading. In findlib/bfile.c. Also,
1285 only cache files that we are reading. Thanks to
1286 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1287 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1288 kes Implement script to automatically generate cats and dll .def
1289 files for Win32 dll.
1290 kes Update README.mingw32 to include new .def file generation.
1291 kes Correct typo in UTF-8 error message as reported by:
1292 jhernandez <julianhernandez@gmail.com>
1293 kes Add additional sm_check() code on debug level 1.
1294 kes Set default debug level to 1.
1295 kes Trap SIGABRT in attempt to get traceback.
1297 kes Reduce bat connect timeout from 30 to 15 seconds.
1298 kes More restructuring and implementing BSOCK class in place of
1300 kes Remove a few unnecessary malloc() tests in crypto code.
1301 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1302 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1303 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1305 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1307 kes Fix Verify InitCatalog. The attributes were not pointing to the
1308 correct saved location.
1309 kes Implement message callback so that GUI is sure to get all
1310 daemon messages. Currently displayed in a dialog in bat.
1311 kes Ignore SIGUSR2 (Bacula timer) in bat.
1312 kes Apply regress patch from bug #859 to allow regress to work
1313 with Solaris compiler.
1315 kes Begin adding TLS support to bat.
1316 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1317 clean up lex.c and make it more readable.
1319 kes Move more bnet functions into the BSOCK class.
1320 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1321 kes Complete change of berrno strerror() method to bstrerror()
1323 Release: 2.1.10 beta
1325 kes Cleanup incorrect email addresses in bsmtp.
1326 kes Make bat display initial messages rather than discard them.
1328 kes First cut of adding .mod to the run command.
1329 kes Implement auto display of messages in bat.
1330 kes Enhanced preferences to allow all Bacula output to be
1333 kes Try to make bsmtp date routines more generic.
1334 kes Fixed bug #856 autochanger documentation.
1335 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1336 kes Add new cats entry point so Win32 builds.
1338 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1340 kes Do better checking for the MySQL 64 bit libraries looking for both
1341 .a and .so libraries.
1342 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1343 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1344 kes Require the thread safe version of MySQL during configure. Thanks
1345 to Andre Noll for pointing this out.
1346 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1347 continuing in migration code.
1348 kes Apply implementation of tray-monitor font derived from gnome-console
1349 submitted by Andreas Piesk <a.piesk@gmx.net>
1351 kes Eliminate important memory loss in SQLite
1352 kes Fixed the batch insert MySQL thread specific data that was not
1353 being freed. See cats/mysql.c:db_thread_cleanup().
1354 kes Fix restore before command.
1355 kes Convert old hdr.name to name() in a few places.
1356 kes Implement update jobid command.
1357 kes Return all time_t dates in db_get_job_record()
1358 kes Stop watchdog in SD earlier.
1359 kes Put Pool just after Storage in please mount message.
1360 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1363 kes Update the po files.
1364 kes Fix Verify InitCatalog by making it cache attributes.
1366 kes Change name bacula-bat to bat for man 1 page to correspond to
1368 kes Check for client and store NULL pointers in status command. This
1370 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1371 kes Fix sign extended editing of %p.
1372 kes Clean out a little old #ifdefing in cats/mysql.c
1374 kes If time diff between DIR and FD is more than 600 seconds convert
1375 INFO message to WARNING.
1376 kes Implement heap size display in status for all daemons.
1377 kes Attempt to fix MySQL db open memory loss (not successfull).
1378 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1379 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1380 Query. This looks like a MySQL but but by doing extra releases,
1381 the memory goes away. This should fix bug #847.
1383 kes When backup fails, cancel SD before waiting for sd termination.
1384 kes If SD is waiting for FD to connect during cancel, wake up the
1386 kes Fix fsf code so that errno is correctly reported.
1387 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1389 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1390 so that Bacula doesn't later stumble into a seg fault.
1391 kes Use the term Restore Client in the restore Job report.
1392 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1393 the original job's FileSetId.
1394 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1395 spooling in migration jobs. Not yet tested.
1396 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1397 reading conf file from a pipe. However, do it with open_bpipe()
1398 rather than popen. Not yet tested.
1400 kes Fix an ugly bug where the VolCatBytes were getting updated
1402 kes Implement bconsole memory command that prints current memory
1403 usage, plus smartalloc dump.
1404 kes Clarify some error messages in backup, admin, and migrate.
1405 kes Shrink label dialog to smaller size.
1406 kes Invert Cancel OK buttons on restore to be OK Cancel.
1407 kes More strerror() to bstrerror() conversions.
1409 kes Start implementing bstrerror() in place of strerror().
1410 kes Stripping path -- seems to work.
1412 kes Prevent door and port files from being restored (mostly
1414 kes Free an unreleased buffer in compat code.
1415 kes Change console Job name from *Console* to -Console- to eliminate
1416 Win32 filename problems. Put Win32 path separator when creating
1417 Console file. This fixes bug #846.
1418 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1420 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1422 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1423 to force Win32 error message.
1425 kes First cut strip path. The data should be passed to the FD,
1426 but nothing is done with it yet.
1427 kes Enhance the digest and signature routines in the crypto
1428 library to accept a JCR and to use it to print error messages
1429 so that they will go in the Job report rather than the daemon's
1431 kes Simplify some of the verify signature code.
1432 kes Simplify a few of the alternative returns in the signature
1435 ebl Use only POSIX regex instead of GNU regex in breg.c for
1436 File relocation. It fix broken freebsd compilation.
1437 kes Convert all other Dir files to use new ua class message
1439 kes Tentative fix for missing digest signature in bug 807.
1440 kes Correct handle problem in new win32_ftruncate routine.
1441 kes Convert ua_purge.c and ua_update.c to use new ua class
1442 message routines for bat.
1444 kes Correct incorrect installation of LICENSE in Win32 installer.
1445 kes Display LICENSE at the beginning of the Win32 install.
1446 kes Attempt to correct the need for the png files to be installed
1448 kes Reapply my bat.conf install script in qt-console. I think I
1449 editted bat.pro instead of bat.pro.in and it was lost.
1450 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1451 the /var/lock/subsys for subsysdir. Also corrects typos in the
1454 kes First cut update job.
1455 kes Correct configure to include qmake of src/qt-console directory.
1457 kes Make restore job yes/mod/no print in one command so GUI works.
1458 kes First cut implementing backup and restore client.
1459 kes Correct editing in Verify output that caused a seg fault.
1461 kes Insure that bat.conf is not overwritten during installation.
1462 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1463 while I was implementing migration in March 2006 !
1465 ebl Cleanup file relocation, using char *RegexWhere instead of
1466 char *where + bool where_use_regexp
1467 kes Update some manpages and add bat manpage.
1468 kes Make a first cut at converting bacula.spec.in for bwx-console
1470 kes Apply patch from John Goerzen to add hostname as fourth argument
1471 to make_catalog_backup script.
1472 kes Fix typos I introduced into bsmtp.c
1473 kes Make pm_strxxx() routines handle input of NULL pointer. This
1474 is to protect from NULL pointers returned from SQL databases.
1475 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1476 kes Add more debug to FIFO code -- fix fifo regression test.
1478 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1479 kes Add thread timer to bnet_connect() to break from OS if wait time
1482 kes Update Win32 build to include new files, new symbols, and
1484 kes Implement socket level heartbeat (tcp_keepidle)
1485 ebl Commit File relocation patch
1486 kes Make bat have 'make install' target.
1487 kes Warn during install if old gnome-console binary found.
1488 kes Warn during install if old wx-console binary found.
1489 kes Add -8 option to bsmtp command line to add content type utf-8.
1490 Fixes bug #809. (Character coding problem in bsmtp).
1491 kes If < is found in target (from, to, cc) then do not enclose the
1492 target in < > in bsmtp. Fixes bug #772 (malformed address).
1493 kes When printing certain items in dbcheck, stop after 300000.
1494 Fixes bug #822. (dbcheck loops).
1495 kes Incorrect status in Dir after waiting for mount with poll set.
1498 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1500 kes Print waiting to reserve a device every 5 mins.
1502 kes Don't call close_part in label.c if tape and relabel.
1503 kes Don't free volume if busy in close() -- should help with
1505 ebl Fix #824 RunScript bug (After script could be execute twice)
1506 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1507 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1508 Add a regression script to test RunScript
1510 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1513 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1514 deprecated. No additional bugs will be fixed, and they will be dropped
1515 in a future release (probably 2.4.0).
1516 kes Change name of wx-console to bwx-console to make it more Bacula
1518 kes Change the name of gnome-console to bgnome-console to make it
1521 kes Some time in March, a Feature Request with patch from Jorj Bauer
1522 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1524 The ability for the director to validate a Client (FD) CN against
1525 an arbitrary set of patterns rather than the hostname, with
1526 A new 'TLS Allowed CN' set of directives which are implemented
1527 in the Client resource. Then pattern matching is used in place
1528 of hostname matching against the Certificate's CN. As an example, we
1529 have certificates which (a) use a local CA, and (b) have a CN of the
1531 kes Add new/changed entry points to Win32 build
1532 kes Create unaccepted-projects for projects that are not accepted.
1533 kes Simplify locking in the reservations system.
1534 kes Add more debug code in reservations.
1535 kes Make sure error condition on reserving a volume is handled correctly.
1536 kes Correct handling of volume_in_use.
1537 kes Correct handling of initializing a device.
1538 kes Move handling of broadcasting releasing a device into release_device().
1539 kes Correct attaching dcr to dev so that it is only done if device
1540 is properly initiated.
1542 kes Locking debug level tweaks in SD.
1543 kes Tweak new Volume code.
1545 kes Add exec external-command [wait-seconds] to bconsole. This
1546 executes the external-command. Note! normally external-command
1547 should be enclosed in double quotes.
1548 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1549 it should normally be off in a production system.
1551 kes Implement die command for SD so that we can force it to dump.
1552 kes Implement SD lock debug code.
1553 kes Implement new algorithm for keeping Volume list in SD. It
1554 is now owned by the device.
1556 kes Implement new code for freeing in use volumes that should
1557 resolve if not all, some of the problems of multiple drive
1558 tape conflicts described in bug 801.
1560 kes Fix gui/bacula-web/images files in svn.
1561 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1563 ebl Fix a bug in batch mode (in string escape)
1564 kes Correct migration prune SQL typo that crept in in a
1565 recent 2.1.x change.
1567 kes Move bnet_despool() into class in bsock.c
1568 kes Modify job report to include director name and Build OS.
1569 kes Move drop root privilege and check_catalog() before fork.
1570 kes Add update database scripts (version 9 to 10) to updatedb directory.
1572 ebl Check size and age of each file after its backup to see if
1573 it has changed during backup, if 'checkfilechanges' is set.
1574 The FD will do an extra check (stat(2)) after
1575 each file backup. mtime, ctime and size are compared with
1576 'before backup' information. If time or size mismatch, an
1577 error message will be generated. You must upgrade FD to use it.
1579 kes Make database name and user configurable
1580 --with-db-name=xxx --with-db-user=xxx
1581 kes Add back database type to message.c for debugging.
1583 kes Implement dir_sql() which issues an SQL query.
1584 kes Modify bat medialist to use dir_sql() and do some minor C++
1585 formatting as well as eliminating a number of pointers, simplifing
1588 kes Fix some of the mtx-changer grep commands for tape label readers.
1589 kes Convert a number of bsendmsg into the appropriate send/warning/error
1590 message class calls.
1591 kes Suppress the using database message in the .sql command.
1592 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1594 kes Add context menu for floating a window.
1595 kes Some minor cleanup and name changes in qt-console
1596 kes Add doing mt setblk 0 in Win32 mtx-changer.
1597 kes Apply Martin's bug fix to move definition of ENODATA for
1599 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1600 sqlite2 and sqlite3.
1602 kes More pruning cleanup.
1603 kes Turn on wait_for_drive by default in mtx-changer.
1604 kes Turn on Batch insert code by default as it now passes regression.
1605 kes Add ./configure --enable-bat to enable building of Bat.
1606 No install yet though.
1608 kes Implement a new .sql command for bat.
1609 kes Implement code to turn off pruning in obtaining the next volume.
1610 Pruning is turned off for the status dir command, but turned on
1611 for SD requests and for the list nextvolume command.
1613 kes Correct Qmsg() that was not updated correctly when committing a
1614 previous change (probably the recent TLS patch).
1616 kes Write new subroutine is_volume_purged() that explicitly checks
1617 if the Volume is purged, and if so marks it as such. This should
1618 resolve problems reported about needing to mount twice to recycle
1620 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1621 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1622 amount of duplicated code.
1623 kes Do volume pruning only for the Media Type desired (reduces pruning time
1624 if multiple Media Types are in the same pool).
1625 kes Implement more detailed info in the Job report for the Bacula version
1627 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1629 ebl Add bbatch tool to bench database and insert mode.
1630 Fix sql quote stuff in batch mode
1631 Fix sql stuff for mysql
1633 kes Correct problems with am/pm scheduling. Fixes bug #808.
1634 kes Implement new prunning code that prunes up to 1000 jobs at
1635 the same time. The same technique can be applied to a number
1636 of other prune/purge subroutines.
1637 kes Add an insanity check when starting a new tape job to ensure
1638 that the tape position has not been changed. If so fail the
1640 kes Fix Win32 build for dlls to add the folllowing:
1641 src/lib/bsock.c -- new file with new entry points
1642 src/lib/dlist.c -- new entry points
1643 src/cats/sql_create.c -- new entry point
1644 src/cats/sql_cmds.c -- new DATA item exported
1646 ebl batch mode cleanup bscan-test is ok now.
1647 kes Implement SD code to check length of disk volume before appending.
1649 kes Correct return status on db_batch... routines.
1650 kes Add call to db_write_batch_file_records() to migration code.
1651 ebl Fix AfterJob timing
1652 kes Move the checking of the database in initializion of the Director
1653 to after we drop privileges. This avoids the need for both root
1654 and bacula access to the DB.
1655 kes Correct a misplaced variable definition in src/filed/backup.c
1656 kes Correct how the new batch insert db_create_attributes_record()
1657 uses the arguments. Caused a seg fault in bscan.
1658 kes Implement lock() and unlock() methods in DEVICE class.
1659 Implement block() and set_block(xx) methods in DEVICE class.
1660 kes Modify bnet_connect() so that it uses time() to check for the
1661 wait time expiring (on some OSes, some system calls may not
1662 return immediately).
1663 kes Modify Verify to obtain the previous JobId when it is actually
1664 running rather than at schedule time (as it was in 1.38.x).
1665 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1667 kes When checking pid in pid file, continue running if the pid is
1668 the same as ours. This occurs on IRIX after a system crash.
1671 kes Extend new GUI API.
1672 kes Make the ua structure a class, and implement send_msg(),
1673 error_msg(), warning_msg(), and info_msg().
1675 kes Apply fix from for building wx-console on the Mac from
1677 kes Implement new select mechanism for GUI programs.
1678 kes Reorganize initialization of stackedWidgets in bat.
1680 kes Add updated nagios plugin supplied by Christian Masopust.
1682 kes More bat implementation.
1683 kes File migrate bug with Pool Occupancy using mediaid instead
1684 of jobids. Fixes bug #795.
1685 kes Fix orphaned buffers in filed backup and verify due to
1686 crypto buffers not freed during errors. Fixes bug #789.
1687 kes Extend new GUI api code to tree commands.
1688 kes Ensure that tree and dot commands check console ACLs.
1689 kes Permit marking directory with trailing slash.
1690 kes Allow 20 console connections (instead of only 10).
1692 kes Add smartctl call to bacula-sd.conf as an example of getting
1695 kes Modify jobq.c to let simultaneous restore jobs run. This may
1696 cause them to fail if they cannot get a drive.
1697 kes Add Client Connect Wait to Storage daemon to permit users to
1698 modify the time the SD waits for a FD connection.
1700 kes Correct virtual changer check which was backwards. This caused
1701 volumes to be unloaded into slots already occupied.
1703 kes Apply Command ACL filter to JobId list in restore command.
1704 kes Correct typeo in var.c patch.
1706 kes Don't let Bacula prune File or Job records for the current Job.
1707 kes Fix variable substitution pad + inc bug reported (with patch)
1710 kes Correct SQLite log table index as reported by Luca Berra.
1712 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1714 kes Begin implementing new comm signals for API.
1715 kes Fix a few places in lib/message.c where the open fd may
1717 kes Continue implementing lib/bsock.c (real class). Make jcr,
1718 who, host, and port private. There are new methods to access
1719 them for non-class use. This required touching a number of files.
1721 kes Add LANG=C to autoconf/randpass so it works with languages other
1722 than English. Fixes bug #788.
1724 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1726 You will not be able to generate Include/Exclude list any more.
1727 It will be fixed soon.
1728 If you want to use this, you can apply
1729 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1731 kes Restore of sockets created false error messages because Bacula
1732 no longer restores sockets, but the code was still trying to
1733 set the attributes on a non-existent file. Reported by a user.
1734 ebl finish RecyclePool feature
1735 Media will takes Pool.RecyclePool
1736 when moving from Scratch to a Pool or when user will do
1737 update volume=xxx frompool
1738 To use it, add RecyclePool = aPool to your Pool resource
1741 RecyclePool = Scratch
1745 kes Expand new BSOCK class adding signal() and new BNET signals.
1746 kes Begin enhancing the dot commands adding a new API function
1747 that returns more information and will make it easier
1748 to interface to the Director from a program.
1750 kes Make DEVICE fd private. Its new name is m_fd, and can be
1751 obtained with dev->fd() outside the class. This is the
1752 first of many DEVICE members to be made private.
1753 kes Implement Michael Renner's idea on having a virtual disk
1754 changer. I made some minor modifications (e.g. I did not
1755 implement the Virtual Changer directive, but simply set
1756 the Changer Command to an empty string.
1758 kes Implement a BSOCK send() method that writes the whole record
1759 in a single write() request rather than in two.
1760 ebl add update volume=xxx recyclepool=yyyy
1761 volume takes recyclepool from pool when using update volume=xxx from pool
1763 kes Fix encryption deblocking bug, which caused some restored files
1764 to be truncated. This fixes bug #763.
1765 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1766 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1768 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1769 ebl Use btime_t instead of uint64_t in media patch.
1771 kes Optimize the use of the database a bit in the Status dir command.
1772 Only open it when needed, ensure that if any previous database
1773 was opened, it is closed.
1775 kes Correct VolCatBytes bug from media patch.
1776 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1777 in the case of orphaned records.
1778 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1779 and File records in 300K chunks to be more efficient. This
1780 idea came from Juan Luis Frances (if I remember right).
1781 kes Apply Eric's scratch patch that moves a purged Volume to
1782 the RecyclePool. Question: how is RecyclePool set? what
1783 happens to the ScratchPool?
1784 kes Apply Eric's media patch that collects read/write media
1785 times as well as byte counts. This patch requires a
1786 simultaneous upgrade of the DIR and SD. Note, there
1787 should be some way to turn off timing. I'm not sure
1788 times are in Bacula units.
1789 kes Apply Eric's batch-insert patch.
1791 kes Update projects list.
1793 kes Implement Include/Exclude file lists in FD as dlists using
1794 the new dlistString class. This permits efficiently having
1795 large include/exclude lists and completes project Item 25.
1796 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1797 console is authorized to cancel the job. This fixes bug
1799 kes Modify SD so that the VolCatJobs medium record is updated
1800 at the beginning of a Job rather than the end. This
1801 fixes bug #775 where exceeding MaxVolJobs caused jobs
1803 kes Added a mutex around getting and setting Volume information
1804 so that multiple simultaneous jobs will single thread.
1806 Switch to using Subversion
1807 kes Remove src/pygtk-console/ from configure
1809 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1810 plus the entrypoints.
1811 kes Apply patch supplied that corrects debug print
1812 in canceling jobs for max run time. Supplied as
1813 part of bug #621, which was previously fixed.
1815 kes Test on job_canceled() and sd_msg_thread_done inside
1816 loop starting the message thread to avoid a race condition.
1818 kes Remove rl_catch_signal from console.c as it conflicted
1819 with the header definition. Fixes bug #765.
1820 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1822 kes Clarify some stored/acquire messages to indicate if the
1823 problem is with read or append.
1825 kes Fix memory leak with storage ids in cats/sql_get.c
1826 kes Terminate watchdog earlier to avoid reference to released
1827 memory -- reported by Jason Austin.
1828 kes Move closing the database from jobq.c to the director daemon
1829 termination routine. This fixes memory leaks for shadow jobs
1830 (i.e. migration jobs).
1831 kes Free up the unique jobid chain items in migrate.c. This fixes
1832 a memory leak problem.
1833 kes Convert some ugly looking for statements to use foreach_alist
1834 in findlib/find.c. This will facilitate converting the structures
1835 to use dlist (for large include/exclude lists).
1836 kes Fix a bug in the btree.c and btree.h routines, then rename them
1837 rblist and add them to be built in src/lib. Include some new
1838 methods written by Rudolf Cejka that make the code more readable
1839 (hides some of the ugly casting).
1840 kes Add set_next() and set_prev() methods which make the code much more
1841 readable. Also add a new dlistString class that facilitates storing
1842 strings in dlists. To be used in the large include/exclude lists.
1843 kes Make some trivial modifications to lib/tree.h that use rblist
1844 rather than dlist for storing the tree links. This was suggested
1845 by Rudolf Cejka. The result of this is that the restore tree now
1846 uses red-black binary trees rather than simple linked lists. This
1847 should give rather dramatic speed improvements for directories
1848 contining large numbers of directories/files (more than 10000).
1850 kes Fix maxruntime bug #621.
1852 ebl Implement the include JobID in spool file name project.
1853 kes Reorder projects file in order determined by Jan 2007 vote.
1854 kes Implement item #12 on project list -- quick release of FD by
1856 kes Fix open of SQLite3 db where user does not have write permission
1857 so that DIR does not crash. Fixes bug #761.
1859 kes Add back missing @ in Win32 Makefile.
1860 kes Change 'Device not configured to autolabel' from INFO
1862 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1863 which should restart an indefinite # of times.
1864 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1865 other DIR specifications.
1867 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1868 Fix path quoting in SQLite scripts.
1869 Fix problems with SHGetFolderPath.
1871 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1873 kes Fix Job restart on error bug that promotes an Inc to a Full
1874 backup. This should fix bug #755.
1875 kes Add qt-console and first cut of code.
1879 kes Fix Bacula->Documentation link on Win32 to point to index.html
1880 instead of bacula.html. Fixed bug #750.
1881 kes Return JobId in db_get_job_record() when JobId==0. This should
1883 kes Do not release source pointers when restarting a failed job.
1885 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1886 This *should* fix bug #747.
1887 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1890 kes Modify USTORE constructor to set an empty store_source string,
1891 and don't copy the store_source string in a cancel. Hopefully
1892 this will fix Arno's seg fault, bug #744.
1893 kes Add back code to disable conio in configure. Fixes bug #743.
1894 kes Correct the Options scanner in the FD to correctly handle
1895 SHA1 option, which was eating the next option. Reported by
1897 kes Add code to indicate when the SD is spooling, spool wait, and
1898 despooling as requested by Alan Brown.
1900 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob