1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
29 ebl Rename faketape to vtape.
30 ebl Update faketape driver.
32 ebl Modify faketape driver to avoid sparse file.
33 kes Add make clean of qt-source directory during ./configure
34 kes Store last block number written to tape in DEVICE and
35 use it for testing for correct last block on EOT.
37 Release Version 2.4.0:
41 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
44 kes Add create_postgresql_database.sql to Win32 installer. Should
45 fix problem reported by Juilio Monteiro.
46 kes Get correct slot when auto unloading a device. This fixes bug
49 kes Fix multiple media restore.
50 kes Make DEVICE Slot private and access it via a method.
51 Allows better control over when it is set and cleared.
52 kes Fix possible seg fault if SQL error.
54 kes Add Martin's fixes to argument scanning for the estimate
55 command. This fixes bug #1093.
56 kes Add debug code to SD.
57 kes Fix renaming a Volume, which used the wrong Volume name.
59 kes If operator has rewind tape, print warning, release tape and
60 try once more. If tape is positioned somewhere, something went
61 wrong, so mark the tape in error and try once more. Previously
62 this error was fatal, now it produces an error message.
63 kes Ensure correct volume name displayed during restore
64 kes Ensure that Volume is mounted for restore.
66 kes Fix a few more Coverity reported problems.
68 kes Apply Allan Black's status dir job count patch.
69 ebl Add information about IMPORT/EXPORT slots in mtx-script.
70 kes Enhance a couple of SD debug messages.
71 kes Tweak unload flag setting and ensure it is set during swap.
73 ebl Fix #1091 about bad output in estimate command.
75 kes Modify autochanger locking to attempt to avoid race
77 kes Make sure device not busy before doing label command.
78 kes Display open() errors except when polling. Previously too
79 many were suppressed. This should fix bug #1070.
80 kes Fix Win32 reparse points. Bacula will not recurse into any
81 reparse point directory, including mount points, unless the
82 directory is explicitly mentioned at the top level (same as
83 with Unix). A file that is linked to another file will be
84 backed up -- much as Unix does for hardlinked files.
87 kes Remove double quotes from ChangeLog and ReleaseNotes
88 kes Remove StorageId test when pruning and recycling (Eric's changes).
89 kes Remove old form of locking when getting volumes -- causes deadlock.
90 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
91 the name unique and to eliminate compile time error.
92 kes Add accurate.o to Win32 FD Makefile
94 kes Fix cats dll build on Win32 after db_update_job_end_record
95 calling sequence change.
96 ebl Switch to tokyo dbm instead of htable in accurate code
97 ebl Include tokyo dbm to bacula source tree
99 kes Fix buffer overruns detected by Coverity.
101 kes Tweak joblog display.
103 kes Implement --without-qwt
104 kes Fix layout of restore tree dialog
105 kes Add configure bat QWT libraries, so that bat can be built
106 with or without the QWT libaries.
108 ebl Add dummy tape driver for regression tests.
109 kes Make sure we unload the right slot when swapping.
111 kes Add debug times, reduce size of two-pool-changer test
113 ebl Tweak autoconf scripts for faketape
115 kes Improve SD reserve debug code.
116 kes Testing an improvement to free up volumes no longer in use.
118 kes Rework SD acquire for read to handle autochanger Volume
120 kes Implement regression that explicitly tests swapping a Volume
121 from one drive to another.
122 kes Enhance disk-changer to detect most error conditions.
123 kes Fix SD code so that it properly swaps a Volume between drives.
124 This fixes bug #1083.
126 kes Apply libdbi patch from Joao Freitas for regress and for
127 Bacula trunk. Regress now works with libdbi. Nice.
128 kes Apply .nobackup patch from bug #1077 submitted by
130 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
131 name into jobs cloned via the run directive.
133 kes Prevent a Volume that is being swapped from being freed from
134 the volume list. This will most likely fix, at least partially,
136 kes Fix strippath so that it does not get a buffer overrun and crash FD.
137 This fixes bug #1078.
138 kes Remove 50 millisec wait in SD that broke debugger.
139 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
140 that a job may run, counted from when the job was scheduled.
141 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
142 a job may block waiting for a resource, counted from when the job starts
143 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
144 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
145 that implements multiple commands per line in the console when using
146 readline. Modify the default to use a semicolon as the command separator.
148 ebl Fix SQL query in migration code.
149 ebl Make accurate mode with hash disk pass regression tests
151 ebl Implement first cut of accurate backup with hash disk.
153 kes Force unload of volume when wrong volume mounted in SD.
155 kes Fix bat seg fault at termination.
156 kes Add Bacula generated version to bat about box.
159 kes Experiment with allowing multiple read jobs.
160 kes Move final volume swapping code to DCR method and
161 call it from acquire_for_read().
162 kes When wrong volume is mounted during read, unload_autochanger.
164 kes Integrate the libdbi changes from Joao Henrique Freitas
166 kes Stop searching for Volumes in SD askdir if DIR returns the
167 same volume name twice in a row.
168 kes Close bat console windows first to eliminate error message
171 kes Tweak the swap Volume from one drive to another code so that
172 it now seems to work.
173 kes Resolve several problems with recycling that broke the new
174 code (these problems are in 2.2.9 as well).
175 kes Remove the volume lock when calling the sysop code.
176 kes Don't mark a reserved volume with no writers as unused otherwise
179 kes Rework class structures for VOLRES, DCR, and DEVICE to make
180 the method names a bit more logical, and for more logically
181 handling the responsibilities.
183 kes Remove redundant code in terminating the scheduler that just
184 causes a seg fault in many cases.
185 kes Cleanup releasing a volume and make it a DCR method.
186 kes Improve algorithm for detecting pre-reserved volume and
189 kes Tweak volume swapping code so it works.
190 kes Correct name overloading in mount.c
191 kes Replace released flag in VOLRES with reserved and add access
192 methods for the VOLRES class.
193 kes Prevent volume from being released while being swapped.
194 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
196 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
198 kes Refactor parts of stored/mount.c
200 ebl Add sanity checks for VolWriteTime and VolReadTime
201 ebl Take care of bad clock changes while computing VolWriteTime
202 and VolReadTime. This should fix or limit #1066
203 kes Correct error string numbers in dird/catreq.c
204 kes Restructure reserving, acquiring, and mounting volumes. Calls to
205 autochanger are deferred for mount.c -- simplifes the code.
207 kes Do not prune any running job. It just fails the job.
208 kes Lock the volumes when changing dev->reserved_device and marking
209 the volume unused otherwise the device can get reserved by
210 another job before the volume is released, thus blocking it.
212 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
213 kes Fix bug #1063, reuse of freed ptr in list nextvol.
214 kes Release regex compile buffer in filed/job.c
215 kes Add proper type of const char in sql_create.c
216 kes Turn off debug in daemon termination routines
217 kes Move free_volume_list() before devices are freed in stored.c
218 kes Fix reference to uninitalized stack variables in bregex.c.
219 This should correct bug #1067.
221 kes Fix possible seg fault in SD when freeing a volume entry.
223 kes Implement unload_dev() before swap device.
224 ebl Add statistics prunning with option and menu
225 kes Separate unload_dev() from unload_other_device() in autochanger.c
227 kes Apply patch from bug #1069 that corrects spurious error messages
228 when ACLs enabled on SGI but no ACL exists.
229 ebl Fix small segfault in bacula-sd when debug level is 500
230 kes Modify run_program() and run_program_full_output() to use
231 call by reference for the results string. This corrects a long
232 standing problem where the address of the string may be changed
233 in the subroutine but not in the calling program.
235 kes Re-enable code to remember last volume mounted on a non-tape
237 kes Add patch supplied in bug #1068 that fixes a SD crash when using
238 a Virtual autochanger.
239 kes Generate correct JobMedia records during spooling/despooling when
240 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
241 <tih@hamartun.priv.no> for excellent analysis and testing.
243 kes Tweak hash algorithm for htable using Martin Simmons idea
244 for doing a circular shift.
245 kes Remember what volume is in VTLs (previously turned off for
247 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
248 pointed out some problems in creating JobMedia records during
249 spooling with concurrent jobs. Fix the problem by updating the
250 start file position before despooling and generate a jobmedia
251 record at the end of despooling.
253 kes Fix handling of JobMedia records during spooling and when a
254 Volume is changed without actually writing data to the Volume.
256 kes Rework certain SD locking based on gdb tracebacks of deadlocks
257 sent by Eric. This code now uses only the volume_lock() rather
258 than the reservations lock when at EOM and acquiring a new
260 kes Ensure only one exit point in several subroutines.
262 kes Implement bsock code to permit locking. Use the new code in Verify
263 in the FD to prevent the heartbeat thread from disrupting the Verify
264 data sent to the Dir.
265 kes Modify SD locking to eliminate locking the reservations system from
266 outside the system. Use the volume lock when getting media data
267 and reserving a new volume at end of media.
268 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
269 when SD starts are not locked into place.
271 kes Fix error compiling runscript code on 64 bit machines.
272 kes Tweak Win32 mount point code.
273 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
274 cleared giving bad file estimate).
275 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
278 kes Keep Schedule run lists in order as suggested by
281 kes Implement autostart scripts for Debian.
282 ebl Implement upgrade catalog scripts.
284 ebl Apply jobstat patch for long term statistics. Have to implement
285 purge stats command and upgrade scripts.
286 kes Fix mtx-changer.in for broken Debian mt program.
288 kes Fix large number of JobMedia records reported by Eric Bollengier.
290 kes Apply doc fix from bug #1062.
291 kes Resolve crash and improper restore wx-console Win32 restore
292 GUI. Fixes bug #1065.
293 kes Update Win32 wxWidgets to latest version.
294 kes Attempt to do correct handling of Win32 mount points. Should
296 kes Fix Win32 FD backup/restore memory leak due to improper termination
297 of BackupRead/Write. This fixes bug# 1038.
299 ebl Reduce memory usage for accurate backup, working only with ctime
300 and mtime. (not all Lstat field)
301 About 40MB for my linux system (400.000 files)
303 kes Add dcr->reserved_volume flag that allows us to release a volume
304 even if it is not vol->released. This allows maxvol2 to work when
305 Volumes expire and we are already writing to the device (i.e. a
306 volume is pulled out from under us by another job terminating after
307 we reserve the drive).
309 ebl Permit multiple command/console per runscript definition.
310 RunScript { command = /bin/true ; command = /bin/false ... }
311 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
312 (restart an application) just after the VSS snapshot on windows.
313 kes Don't zap dcr values during release_volume() as they might
314 have the next Volume to be mounted.
315 kes Fix AIX prototype.
317 kes Second cut of drive switching during backup.
320 kes Update Win32 version of wxWidgets to most recent version.
321 kes Tweak Copy job details.
322 kes Rework dir_find_next_appendable_volume to make a bit more effort
323 to find a suitable volume before giving up.
325 kes Make ask_sysop_to_create... to return if waken from wait.
326 This helps get out of blocked conditions.
327 kes Experimental implementation of switch_device in reservations.
328 kes Implement FD version to allow easier protocol changes.
329 kes Add Plugin Options string -- not yet passed to FD.
330 kes Implement PluginOptions ACL.
332 kes Attempt to correct problems with restores with autochangers and
333 use counts going negative
334 kes Rework SD status command and implement API for bat. Implements
335 header, runing waitreservation, devices, volumes, spooling,
336 and terminated status keywords.
337 .status storage=xxx <keyword>
338 kes Clarify TLS error message by adding double quotes around name.
339 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
340 kes Pass jcr to tls routines so debug messages can be handled better.
341 kes Rework jobq resource allocation code, and possibly fix a bug
342 that caused reference counts to get out of sync.
344 kes Rename fd/dir plugin to use Bacula standard underscore.
345 kes Plugin work -- bring dir up to fd level.
346 kes Start implementation of VTL code
347 kes Fix Win32 build after adding new cats subroutine.
349 kes First cut at Duplicate Job implementation.
351 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
352 kes Start PluginOptions string, and refactor a bit of ua_run.c
353 ebl Apply Allan patch that permit to reset recyclepool.
355 kes Test patch -- possible fix or improvement for bug #1053
356 kes Refactor FD and SD status commands to permit new API code in
357 SD, and to fix Win32 build.
358 kes Win32 build is now working.
360 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
361 some ideas in patch from Scott Bailey.
362 kes Begin implementation of duplicate Job control.
363 kes Fix some of Win32 build after recent additions.
364 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
365 which causes the FD to detect whether or not the OS has the
366 honor no dump bit (*BSD systems), and if so, to skip backing up
367 any file with this bit set. The feature is enabled by setting
368 'honor no dump flag = yes' in the Options section of a FileSet.
370 kes Correct po warning message with datarootdir
371 kes Implement more code in dird.c to put configuration parsing in
372 a class rather than use globals.
373 kes Restructure SD status command for implementation of bat API
376 kes Suppress incorrect 'Will not descend from x into y' messages.
377 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
378 daemon globals used by parser.
379 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
381 kes Fix free of plugin_list when none exists.
383 ebl Apply accurate project patch.
385 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
386 on non-mempool object)
387 kes First cut of converting FD .status to work with bat API.
389 .status client=XXX header
390 .status client=XXX running
391 .status client=XXX terminated
392 kes Implement first cut of Copy Job.
393 kes Implement Catalog in Pool resource. It overrides catalog specified
394 in the Client resource.
396 kes Apply patch (with some difficulties) from Joao Henrique Freitas
397 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
399 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
400 ftruncate() actually works. In the case of some (cheap) NAS devices,
401 it does not, and so recycling NAS Volumes does not work. The code
402 simply unlink()s the file, then recreates it. This fixes bug #1011.
404 kes First incomplete cut of big malloc blocks for htable.
405 kes Tweak plugin code.
407 kes Plugin debug code + tweak a couple bat dialog layouts
409 kes Fix creating first JobMedia record during Migration to include
410 proper index. This caused slow restores of migrated jobs.
411 kes Temp fix to plugin name file_index.
412 kes Bacula backed up and restored a MySQL database.
414 kes Implement plugin restore.
415 kes Implement parsing of db_driver to give db_type index.
417 kes First cut of plugin restore code.
418 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
419 and do not strip paths on symbolic links.
420 kes Set catalog backup database and user name from values specified on
421 the ./configure line.
422 ebl Fix #1031 about wrong pool source information in job report.
425 kes Remove a redundant jcr argument to find_files, match_files, and
427 kes Implement '.status dir header|scheduled|running|terminated' that
428 prints the requested status section. With the exception of the
429 header, the other reports have fields separated by tabs (\t).
431 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
432 a resource embedded run command to find a since time if no explicit
433 since time was supplied on the command line.
434 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
435 that updates the state file at job termination time in addition to
436 when the daemon terminates.
438 kes First version where a plugin did a backup.
439 bpipe-fd.so created a backup file, wrote a test
440 string to it, and Bacua could restore this fabricated file.
442 kes Implement DB Driver = string for the DBI driver.
443 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
444 kes First cut of code for loading Win32 plugin dlls. Implement
445 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
446 and implement a dlfcn.h file based on opengroup's definitions of
449 kes First cut plugin directives.
451 kes Apply patch from bug #1049 to prevent stripping the path on a
453 kes Attempt to fix bug #1047 where stripping a path corrupts the
454 heap. Waiting for feedback.
455 kes Correct the Mount message not to suggest labeling a new tape
456 when doing a restore. Submitted by email by John Stoffel.
457 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
458 FD by using casting. Reported in bug #1042.
460 kes A bit of crypto cleanup. More later.
462 Release Version 2.2.8
464 kes Apply patch from Martin to correct bug #1040, bscan sets existing
466 kes Fixed important spelling error in doc -- bug #1045.
468 ebl Fix bextract to be able to extract non-portable Win32 data to
470 kes Move initialization of read/write res lock earlier in the code.
471 This fixes the crash with a null conf file. This fixes bug
473 kes Redefine CURES in lib/parse_conf to be URES and move it all
474 into lib/parse_conf.c -- this responds to bug #1042, but does
475 not fix it. The fix is not to compile with FORTIFY_SOURCE.
476 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
477 the trunk SVN. I don't think this was reported as a bug.
479 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
481 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
483 kes Add DataDespooling and DataCommitting status (committing is
484 the last despooling).
485 kes Finish implementation of new reservations code noted below.
487 kes Fix bsnprintf for float point numbers. I broke recently when
488 parameterizing some variables. This fixes bug #1036.
489 kes Undo recent reservations changes ... will apply them later
490 when they work better.
492 ebl Fixes #1034 which cause mysql to hang the connection after 8h
493 ebl Change default statistics target of filename.name and path.path
494 fields for PostgreSQL. This speeds lookup by indexes. Thanks
496 kes A few more tweaks to new reservation code. Make sure to clear
497 vol released flag when retaking volume. When reading label and
498 label is bad mark volume unused. When recycling, mark volume
499 unused so it can be renamed.
501 kes Fix reserve_volume() so it doesn't release a volume in use
502 (i.e. a volume entry not marked released). This should be
503 the last part needed to fix bug #1018.
505 kes Move Heartbeat documentation from Job to Director resource.
506 This fixes bug #1033.
508 kes Fix existing switch drive SD code to call autochanger to release
509 any old volume. This must be done to keep the autochanger from
510 releasing subsequently newly reserved volumes in doing a close().
511 This should fix bug #1018.
512 kes Fail if attempting to get console input in batch mode. This
513 should help fail RunScript console commands that are incomplete.
514 kes First cut implementing switch_drive() in SD (not actually called).
516 kes Implement first cut running console commands in a RunScript.
518 ebl Fixes bug #1028 where 'Selection Type' option was not usable
520 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
523 Release Version 2.2.7
525 kes Add new free_tls() entry point so that Win32 builds.
526 kes Fix compile warning in src/lib/util.c
527 kes Fix entry point for edit_job_codes() so that Win32 builds.
528 kes Fix seg fault Frank Sweetser reports in regression testing
529 on his systems. The problem was that the original author of
530 bsnprintf.c did not take into account the side effects of
531 using ++x in the argument to a #define.
532 kes Make SD protocol backward compatible with version 2.2.x.
534 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
535 because Bacula no longer restores sockets.
536 ebl Always use ignorecase fileset option on win32 FD.
538 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
539 that implements double quoting include names in conf files,
540 and also allows piping input by having the first character
541 be a vertical bar (|).
542 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
543 that implement %f in RunScripts to pass the FileSet name.
544 kes Skip leading | when lex input comes from a pipe as suggested
545 by Michael Stapelberg <michael@stapelberg.de>.
547 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
548 Nerijus Baliunas <nerijus@users.sourceforge.net>
550 kes Implement Plugin Directory and plugin events.
552 kes Implement a security enhancement: TLS authentication but no
553 encryption. Enabled by setting 'TLS Authentication = yes'.
554 Note when this is on, TLS encryption is turned OFF!
556 kes This patch corrects a problem where the maximum concurrent storage
557 jobs counter gets out of sync during restore jobs causing jobs to
558 'wait on max Storage jobs'. This patch fixes bug #1009.
560 kes This patch fixes bcopy so that it produces correct Volumes.
562 kes This patch eliminates spurious output to the console during a VerifyVolume
563 job that contains encrypted data. It fixes bug #1024.
565 kes This patch prevents the 'status dir' command from trying to use a scratch
566 volume and possibly moving it from one pool to another. This patch fixes
569 kes Add new include to postgresql.c suggested by Marc Cousins so
570 that it compiles correctly with pgre version 8.3.
572 kes Fix --archivedir addition to configure. Replace it with
573 --with-archivedir in configure.in This fixes the regression
575 kes This patch fixes bug #1012 where the job is canceled because
576 of Max Run Time exceeded when the job has not yet started.
578 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
579 one 'part' to write. Instead of each part being stored on disk,
580 written to DVD, then deleted from disk, all parts are written to disk,
581 and only the last is written and deleted from disk.
582 kes This patch fixes the status command to include the formating string for
583 JS_AttrInsterting. It fixes bug #1021.
584 kes This patch should fix the Mac OS X build problem on the latest
585 Darwin, where sys/types.h was not included correctly (apparently
586 due to a change in the Mac headers). The solution was to explicitly
587 ensure that it is defined for the ./configure.
588 This patch also has a rebuild of configure that includes the Debian
589 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
590 kes This patch should ensure that queued messages to the console are
591 displayed as soon as possible. It should fix bug 1007, but has been
592 reported not to work.
594 kes This patch fixes the infinite loop when trying to increase the
595 maximum number of volumes in a Pool during the add command.
596 This patch fixes bug #1008.
598 Release Version 2.2.6
600 db Remove extra data on estimate command in joblist for bat.
602 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
603 really change anything, but is the beginning of doing it *right*.
604 To do it completely right the LastWritten date must be passed to
605 the SD, but it is not yet done.
606 kes Minor tweaks to some bat restore SQL.
607 kes This patch fixes bug #1003 where putting the message output from
608 a Verify job into the catalog results in a recursive loop. The problem
609 seems to show up only with postgresql (to be verified).
610 kes Correct %x to %p in postgresql debug statement.
612 kes Fix bug #942 where lots of emails where generated when the heartbeat
613 interval was low and Bacula wanted a different tape from the one in
616 ebl Add new SD despooling attributes and Dir inserting attributes
617 job status codes in the catalog (Status table).
619 ebl Use qmake-qt4 instead of qmake when available (debian system).
621 kes Add a security warning to src/cats/make_catalog_backup.in indicating
622 that passing the password via the command line (arg 3) is insecure.
623 This responds to bug #990 (it doesn't fix it).
625 kes Set default debug_level to zero. This corrects bugs #991 and #993.
626 kes Fix a crash in bat when it cannot connect to the Director for example
627 if the Director is not running.
628 kes Remove redundant INDEX (JobId) from File table in the trunk.
630 kes Make explicit exception to GPL in LICENSE to permit linking
631 the Win32 FD with Microsoft VSS code.
632 kes Apply the Solaris package patch from
633 Masopust, Christian <christian.masopust@siemens.com>
634 kes Apply the patch to optionally add a timestamp in the debug output
635 submitted by Mariusz Czulada <manieq@wp.eu>.
637 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
638 backend (sql_strerror). Fixes bug #989
640 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
641 It applied with no problems.
642 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
644 kes Redirect stderror to stdin on mt status command in mtx-changer.in
645 since the status is returned on stderr on Solaris.
646 kes Activate Close button on tray-monitor window. This fixes
648 kes Check for NULL item in parse_conf.c before calling it. In the
649 case of Device, there is no item and this caused a seg fault when
650 Device appears in the conf file.
651 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
652 avoids pulling in config.h multiple times in some new code.
654 kes Fix spurious warning message printed when creating a volume with
655 a LabelFormat. This fixes bug #976.
657 Release Version 2.2.5
659 kes Add JobId in place of Job name in all the Jmsg() output.
660 kes Correct the APP_DESC for the Win32 storage service (remove an e).
662 kes Make maxvol-test and new more strict maxvol2-test work.
663 kes Print JobId in all Jmsg() job output.
665 kes Add new SD despooling attributes and Dir inserting attributes
666 job status codes. This fixes bug 961.
667 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
669 kes Fix doc issue. This fixes bug #963.
670 kes Fix listing performance problems in bat. Pointed out by
672 kes Remove old debug code.
673 kes Fix bat code that tests for Win32. This should fix bug #968
674 kes Query 5 list wrong Vol after migration. This fixes bug #960
676 ebl Fix #969 where user can't change Replace option in restore menu.
678 kes Save jcr in thread specific data (tsd) for each thread.
679 kes Make Dmsg() print JobId as -%u.
680 kes Make Jmsg, Emsg, and others automatically pickup the jobid
681 for the thread if it exists.
682 kes Remove old reservation debug jid code.
683 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
684 ebl Add an option that permit to specify spool size in job
685 definition. (Applying patches/testing/spoolsize_per_job.patch).
686 You must upgrade SD and DIR at the same time.
687 dvl Add new configuration item --archivedir
688 dvl Adjust regression tests to use tmp not /tmp. This will allow
689 multiple concurrent runs of the regression tests.
691 kes Fix race condition that drops final block written to volume.
692 This happens in rare cases with multiple simultaneous jobs
693 when the Volume fills. This fixes bug #964. May be related
694 to bug #935 and possibly #903.
695 kes Eliminate more strerror() and replace with bstrerror().
696 kes Remove BSD getopt and replace with unrestricted IBM version.
697 kes Fix Win32 build for changed calling sequences.
698 kes More tweaks to the mount volume routines to get everything
699 right. Changed variable name from find to have_vol, which is
700 much easier to understand.
701 kes Enhance btimer debug code.
703 kes Fix FD->SD authorization failure, which was due to spurious
704 wakeups from a pthread_cond_timedwait(). Simply check the
705 predicate before continuing. This fixes bug #953.
706 kes Add const char where needed (more to do). Remove temp debug code.
708 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
709 kes Don't overwrite error message in check_tables_version.
711 kes Unlock batch insert tables with same calls used elsewhere.
712 kes Allow starting 59 jobs a second.
713 kes Make SD session key more random.
714 kes Add retry for SQLite opening db if it fails. Probably helps
716 kes Suppress extra error messages during batch insert failure.
718 kes Add jcr to timer packets so if killed message can be sent to job.
719 kes Add JobId to all Dmsg() output.
720 kes Put some FD auth code on dbglvl rather than fixed.
721 kes Return insert attributes error message in db msg buffer to avoid
722 false error messages. Helps fix bug #966.
723 kes Separate batch init error messages. Probably helps fix bug #966.
724 kes Make SD code that contructs attribute insert check string lengths
726 kes If Dir gets an error during inserting attributes, cancel SD.
727 This reduces unnecessary error messages.
729 kes Correct search boolean for getting Volume info
730 ebl Cleanup batch insert code. Probably fixes bug #965.
731 kes Back out one small change to the reservation system (reserving a volume).
732 kes Rework how a Volume is mounted. It is now much more intelligent and
733 will always attempt to use any mounted volume if possible and reduces
734 calls to the Director asking about volumes.
736 kes Turn off some code when batch insert not enabled.
737 kes Edit FD name in connect error messages.
738 kes Rework the reservation system to take into account that the Director
739 might give us a Volume that is different from the current one being
740 used, and to ensure that we don't exceed Maximum Volume Jobs.
741 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
742 fatal error with multiple jobs running'
743 kes Add more debug code in reservation system.
744 kes Implement maxvol-test to check bug #947.
746 kes Add code to handle tray monitor separated from Win32 FD.
747 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
749 kes Add missed return in fixing verify bug -- trunk only.
750 ebl Fix a command parser issue causing a director segfault.
751 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
753 kes Increase the max block size to 4MB fixes bug #957.
754 kes ERABT if user sets min block size > max block size. Fixes bug #956.
755 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
756 is not properly mounted (recognized) during a poll.
757 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
758 Job that has differences reports Verify OK.
759 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
761 ebl Add an option to operate on all pools with update vol parameters.
762 This complete the project 20. Patch from Nigel Stepp.
763 ebl Add history support to bconsole when using readline.
764 Using Ctrl-D to exit doesn't update .bconsole_history
765 kes Modify new volume algorithm to use max MediaId for generating next
766 volume number rather than the count of Volumes. This should essentially
767 eliminate the failure rate if some volumes were deleted. Bug #921.
768 kes Begin implemention of Optimize Job Scheduling.
769 kes Implement restore callback that Dirk and I agreed on for bat
770 restore. This fixes bug #928. Restore of backup of zero files fails.
771 kes Fix SQL Catalog logging which broke with new db_escape_string
774 Release Version 2.2.4
776 kes Fix bacula_cats.def for new db_escape_string().
777 kes Increase size of name string when FD making connection to SD.
778 May fix bug #953. FD->SD connection failure.
780 kes Add code to help Dan debug 2drive-incremental-2disk test.
781 kes Add code to try to fix bug #908.
782 kes Add waits to multiple exit detection code to try to force pid
783 file to always be deleted.
784 kes Restore good dev.tar.gz to rescue set appropriate binary property.
786 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
787 trying to switch drives by checking for blocking before unblocking.
789 kes Cancel storage daemon in all cases where FD reports error. This
790 should fix virtually all cases of bug #920.
791 kes Fix db_escape_string() for MySQL which did not compile.
793 kes Fix error message that was clobbered when Dir tells SD it does not
794 have write permission on Volume. This should fix a minor point
795 in bug #942, but not the main problem.
796 kes Add code to cancel job in SD if FD connection fails. This should
798 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
799 dvl Pass jcr and db into db_escape_string() to enable better escaping
801 kes Fix migration code to get correct Volume name with multiple volumes
802 by skipping |. Fixes bug #936.
803 kes Implement patch supplied by Landon to fix bug #944 where using
804 TLS with bconsole uses 99+% of the CPU.
805 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
807 kes Move patches into patches directory.
809 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
812 ebl Using 'm' in bconsole will show messages like before,
813 and not memory usage.
814 kes Fix bug #935, and probably also bug #903 where files were not
815 restored. MediaId was not properly set in JobMedia record after
818 kes Suppress chown and chmod error messages if the FD is not running
821 kes Apply Martin Simmons' patch that should turn off the new API usage
822 when batch insert is turned off allowing building on older
824 kes Add ./configure search in qwt-qt4 for qwt package
826 kes Bacula is now free of 3rd party GPL copyrighted code!
828 kes Add guid_to_name.c/h which replace idcache.
829 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
831 ebl Detect if new PosgreSQL batch insert API is present.
832 kes Correct incorrect mempool call causing Director crash. Occurs on
833 systems without va_copy().
834 sb Update spec files for 2.2.1 release
836 kes Fix memory pool call in ua_output.c. bug #934.
837 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
838 Add test program to fnmatch.c
840 kes Integrate patch to README.vc8 from
841 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
842 edit it to get it into Unix patch format.
843 kes Implement mkpath.c to replace old FSF makepath.c
845 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
847 Release Version 2.2.1
849 kes Update POTFILES.in
850 kes Cleanup a few underquoted AC_DEFUNs in configure
851 kes Apply patch from Martin Simmons that adds a test for va_copy to
854 kes Fix bug #921 by increasing the number of tries to create a new volume
856 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
857 can be called multiple times. Implement a version for machines
858 without va_copy() that gets a big buffer.
860 kes Integrate more portable zone offset code into bsmtp.c
861 Submitted by Attila Fülöp.
863 kes Fix bad SD->FD return status reported by
864 (James Harper) <james.harper@bendigoit.com.au>
865 ebl Fix a bug in read_close_session which return random status
866 thanks to James Harper
868 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
869 and directory names during restore of single file/directories.
870 kes Add sanity checks to .sql command when string is empty. Hopefully
871 that will resolve Dirks Director crash.
873 kes Apply patch submitted by Martin Simmons that corrects a seg fault
874 in the bsmtp chat subroutine when debug is >= 10.
876 kes Fix Director crash when running bat SQL queries.
877 kes Add David's notes on Item 8: Copy pools.
879 kes Rework projects file to be current and ready for a vote.
880 kes Enhance lex scanner error message.
882 kes Tweak LICENSE file to mention BSD code.
883 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
884 if specified on the ./configure.
885 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
886 This class is intended to allow us to open a second bsock to the
887 Director while in the restore subdialog.
889 kes Fix configure to create bat Makefile before creating dependencies.
890 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
891 kes Add a tooltip to the tray monitor.
892 dvl Set the Director's PID file before dropping privs. This fixes
895 kes Update AUTHORs file
896 kes Increase the default max concurrent jobs to 20 in FD and SD to
897 correspond with the default .conf files.
898 kes Rewrite the Win32 service routines. This eliminates the 3 copies
899 some different, of the same file created by RN when porting the
901 kes Rearrange some of the Win32 directories and the placement of the files
903 kes Set DEVELOPER flag in version.h
905 ========================================================================
906 Release Version 2.2.0
908 kes Apply a second doc patch from Marc.
909 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
910 improves the tips section that discusses how to setup multiple
913 kes Update bat README file.
914 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
915 corrects a typo in the Recycle status check in db_find_next_volume().
916 This will probably fix a number of annoying problems with multiple
918 kes Modify most of dird/msgchan.c to use bsock class calls rather than
919 bnet calls -- no functionality change.
921 kes Modify the Verify output to specify if files are missing on
922 the Volume(s) or disk. Fixes confusion in bug #916.
923 kes When more than one Volume is read in a migration job, the last
924 Volume bytes reported are from the last read volume rather than
925 the last written volume. Fixed. This fixes bug #910.
926 kes Fix display of Recycle flag after update volume=foo recycle=yes.
927 It previously printed New Recyle flag is: no. This fixes bug
930 kes Correct seg fault when switching tape drives during restore.
931 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
932 be used until after 2.2.0 release.
934 kes Remove fnmatch() in SD that permitted wild card specifications.
937 kes Fix %g in filename returned by SQL for browse tree reported by
939 kes Fix configure so that it puts config.out in the cwd rather than
941 kes Attempt to fix the locking problem reported by Eric in bug #906.
942 kes Make berrno class to leave errno unchanged after constructor call.
943 kes Make bnet_server use the heap rather than the stack to allocate
944 its socket fd pointers to avoid a crash at termination. Problem
945 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
947 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
948 and putting it in depkgs-qt along with Qt4.3.
950 kes Rework code in acquire.c that switches drives for reading when
951 the Media Type does not match. This should fix bug #906
953 ebl Fix a director segfault during job setup #907
954 kes Correct seg fault in postgresql when first operation returns no
955 rows. Fixes Dirks File browser problem seg fault with bat.
957 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
958 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
961 kes Implement PopUp YES/NO dialog for bat.
963 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
965 kes Correct RunScript to terminate job in FD on failure.
966 kes Change abort_on_error and AbortJobOnError to fail_on_error
967 and FailJobOnError in RunScripts.
968 kes Minor tweaks of code formating in RunScripts, principally to
969 avoid depassing 80 columns.
971 kes Eliminate one #ifdef Win32 in bsmtp
972 kes Implement grow tool to grow a file for testing very large databases.
973 kes Add big-vol-test to test Bacula seeking with > 5GB.
976 kes Modify find_next_volume() to return all values in Media record.
977 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
981 kes Update Release notes
983 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
984 Warning, in previous beta version, all media get from scratch keep their
987 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
988 This should fix bug #842. Made a note to look at removing the temp
989 files at the end of the install.
990 kes Add ability to mount and unmount a file device providing it is
991 marked as being removable and has the appropriate mount and unmount
992 commands defined in the Device resource. This fixes bug #830.
993 kes When applying a storage override, release all previous storage
994 definitions rather than just prepending the new storage.
995 This should prevent a good deal of confusion.
997 kes Implement ./configure search for qwt libraries.
999 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1000 Win32 FD. This should fix bug #893.
1001 kes Remove an unnecessary beep in Win32 init code.
1002 kes Update copyright dates in Win32 executable about boxes.
1003 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1004 code with a BSD getopt.c and getopt.h.
1005 kes Remove sched.h from the Win32 compat directory -- not used.
1006 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1007 need to shut it down, do it through the services panel or the command
1009 kes Remove some inappropriate Bacula FSFE copyrights.
1010 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1011 kes Fix regress config non-portable test as pointed out by
1012 Florian Heigl <florian.heigl@gmail.com>
1013 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1014 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1016 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1017 Reported by Frank Sweetser.
1021 kes Fix client-only build.
1022 kes Integrate client-only fixes for bsys (initgroups) and conio from
1023 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1024 kes Make arguments to get_scratch_volume() in same order as other
1026 kes Rework the prune_volumes() subroutine so that after purging and
1027 no volume found in desired pool, it will check for a scratch
1028 volume. This prevents recycling the whole scratch pool.
1029 kes Add code to status storage to print boffset_t (largefile support).
1031 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1032 kes You now need a --with-qwt=<dir> to be able to build bat.
1033 kes Update src/win32/cats/bacula_cats.def to include the new
1034 db_get_query_dbids() call on Win32.
1036 kes Correct a problem when selecting a scratch volume and moving
1037 it to another pool that lost some columns.
1038 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1039 kes Enhance Autochanger error messages to include Volume and device name.
1040 kes Rework prune_volumes() code to take account of InChanger flag,
1041 and to handle recycling volumes going to the Scratch pool and
1042 current pool because the RecyclePool directive.
1043 kes Implement a better and more efficient db_get_query_dbids() to
1044 handle creating and passing back a list of DBIds.
1048 kes Start work on new more efficient DBId subroutine. First use
1049 will be for recycling volume to Scratch inchanger.
1050 kes Increase number of JobIds in pruning from 1000 to 10000.
1051 This to be replaced by above routine.
1052 kes Begin implementation of building Qt4 on Win32.
1053 kes Correct typo in fix I added for bad TLS shutdown.
1054 kes Pull 2.0.3 patches into patches directory.
1055 kes Update Release notes. Include qt-console in line count.
1056 kes Update Projects file.
1058 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1059 bug in migration code where a job that spanned two volumes
1062 kes Implement new BST_DESPOOLING blocked state. Change from locking
1063 during despooling in SD to blocking. This means that other threads
1064 can work with the device structure, in particular the reservations
1065 system while despooling.
1067 kes Fix return in reservation message queue that missed clearing
1068 the jcr lock (implemented 26Jun07 below).
1069 kes Rename a number of dev methods to make locking function names
1071 kes Document locking in lock.c. Move lock structures to new file
1074 kes Move reservations message lock to lock jcr only this
1076 kes Move main SD locking code into lock.c (new file).
1077 kes Update Win32 build to include lock.c
1081 kes Dirk committed the qwt library code for drawing graphs in bat.
1082 kes Tweak install of qwt so that it is integrated with ./configure.
1084 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1085 out by Eric (my typo).
1086 ebl Fix configure.in to get batch mode enable
1087 kes Return correct string from authenticate.cpp in bat when connecting
1089 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1090 spurious line drops when using TLS.
1091 kes Do not file reparse points when restoring a file that already
1094 kes Implement Windows reparse points -- similar to directories, but
1095 we do not descend into it. This is a first cut. They seem to
1096 be backed up, but restore is not yet tested.
1097 kes Remove restore_blocking in tls code when shutting a socket to leave
1098 it in blocking mode. Hopefully this will fix the encryption bug
1099 reported by Frank Sweetser.
1100 kes When opening a file for backup, tell the OS that we are going to
1101 read it sequentially -- optimization.
1102 kes Change variable names in authenticate_director() to not conflict
1103 with member names in bat. Caused great confusion with compiler,
1106 kes Queue openssl error messages in case of comm problem.
1107 kes Do shutdown() call if socket terminated.
1108 kes Remove some duplicated code in tls.c
1109 kes Move more of the bsock member variables into private and access
1111 kes Add Frank Sweetser's tls-test to the regression suite.
1113 kes Add Swedish sv.po file
1115 kes Don't print clock skew message in FD if less than 3 seconds diff.
1116 kes Add a bit of VSS info to status client.
1117 kes Implement a first cut of Vista VSS, using Win2003 code.
1119 Release: 2.1.20 beta
1121 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1122 loaded tape but uses first drive).
1123 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1124 This was indeed a Win32 issue.
1126 kes Simplify search of autochanger for in-use Volume.
1127 kes Fix exit condition of check for in-use volume. kes Remove
1128 inappropriate my_postgresql_free_result() in db_close()
1130 kes Fix bad return in FD when encryption signature not found.
1131 Probably caused a crash.
1132 kes Inhibit missing encryption signature error messages for
1133 file types where no signature computed.
1134 kes Correct inverted check on autochanger in reservation system.
1135 kes Tweak debug code in autochanger reservation.
1137 kes Add some additional locking in the cats directory in subroutines
1138 that modify packet variables called from batch insert.
1139 kes Rework how dcrs are allocated. new_dcr() can now be called
1140 with an existing pointer, and it will simply clean it up.
1141 This allows the reservation system to test various different
1142 devices, and will permit easy device changes.
1143 kes A bunch of changes all over to handle new new_dcr() calling
1145 kes Work more on the Volume management in the SD. Remember Volumes
1146 for tape drives and for autochangers (even virtual disk changers).
1147 kes When looking at the Volume list to reserve a drive, handle
1148 autochanger names correctly by interating through the changer
1149 devices. Also call the Director to see if a Volume is suitable
1150 for the current job.
1151 kes Fix some bugs in bscan. Make sure all media records are written.
1152 Make sure that valid JobMedia records are written for disk files.
1153 Previously they were completely wrong.
1154 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1155 that the URLs don't change and so that the developers will all
1156 work off the same copy. Rebuild from scrach.
1157 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1159 Release: 2.1.18 beta
1161 kes Fix seg fault in FD from incorrect digest size.
1162 kes Fix argument to non-OpenSSL crypto.c subroutine.
1164 Release: 2.1.16 beta
1166 kes Remove a few malloc()s from the encryption code.
1167 kes Use the class calls to bsock in filed/backup.c and restore.c in
1168 place of the old bnet_xxx code.
1169 kes Implement code that does an on the fly calculation of the
1170 signing digest during restore of encrypted files. It makes
1171 a best guess at the algorithm, and if it is not correct, will
1172 then revert to the old code which reads the file after it is
1174 kes Implement at least one missing crypto stream in stream_to_ascii()
1175 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1176 #877 where a reload with bad syntax causes Dir to exit.
1178 Cut: 2.1.14 beta (not released)
1180 kes Do not free a volume on a tape drive until another volume is
1181 mounted and read, or the autochanger unloads the volume.
1182 This should help the SD re-use volumes that are already mounted,
1183 and should fix bug #886.
1184 kes Apply patch from user brettedgar that allows gnome2-console include
1185 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1186 kes Apply patch from Lucien Weller that fixes day of week calculation
1187 because of DST flag problem. Fixes bug #887.
1189 kes Move find_next_appendable_volume() to after acquiring a valid device
1190 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1192 kes Unable to reproduce bug 872. However added additional testing for
1194 kes Bug #874 resolved by documenting SQLite limitations.
1195 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1196 kes Bug #881 resolved by removing typo in mtx-changer script.
1197 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1198 approval. Added a link to the wiki on the web page, and implemented
1199 a backup from http://paramount.ind.wpi.edu
1201 kes Fix update allfrompool to pass pool name.
1203 kes Convert to pure GPL v2 license.
1204 kes Fix sscanf problems reported by Peter Buschman that caused
1205 a bus error on Solaris.
1206 kes Rework (simplify) the select prompt in bat.
1207 kes Move get_jobid_from_tid() into lib and create a
1209 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1210 should definitely fix the problem of lost error messages in the
1212 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1213 kes Eliminate tcpd.h from the project. Enclose the #include from the
1214 library with extern C ...
1215 kes Add print of signal name when a signal is trapped.
1217 Release: 2.1.12 beta
1219 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1221 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1222 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1223 makes SQLit3 run 30 times faster, though a bit less safe.
1224 kes Implement --with-batch-insert in configure and detection of thread
1225 safe libraries. It is on by default, but turned off if no thread
1226 safe library (e.g. SQLite 2) is available.
1228 kes Fix Bacula PostgreSQL buffer overruns.
1229 kes Do better checking for NULL results returned from PostgreSQL;
1230 implement retry for failed queries; clear results buffer after
1231 failed query. Hopefully this will correct the PostgreSQL failures.
1233 kes Implement algorithm to handle only one appendable volume with
1234 Prefer Mounted Volumes = no.
1235 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1236 returned from a query.
1237 kes Make volume lock recursive.
1238 kes Implement an additional volume reservation algorithm that
1239 starts by considering all reserved volumes then uses the
1240 old brute force algorithm of searching the resources to
1241 find a suitable device.
1242 kes Add new reservations debug code and refine the old code.
1243 kes Update the win32/dll/bacula.defs file.
1245 kes Tweak reservations algorithm to permit a few more cases, i.e.
1246 volume reserved, but on different drive, ...
1247 kes Enhance SD status to include Pool and Media Type for drive in a
1248 more readable format (a bit longer).
1249 kes Fix PostgreSQL double free.
1251 kes Minor refactoring of restore decryption code.
1252 kes Add code to smartall.c to detect double free of a buffer.
1254 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1255 so that bsmtp will create a correct email address (mailbox only).
1256 kes Modify 'memory' command so that the buffers are listed as 'In use'
1257 to avoid confusion with Orphaned buffers.
1258 kes I reworked the OpenSSL include/lib flags to be handled in
1259 the standard Bacula way, which should fix bug #863 concerning
1260 non-standard OpenSSL libraries.
1262 kes Implement Help Browser window for bat.
1263 kes Fix reload bug that reset StorageId to zero.
1265 kes Fix TLS #ifdefing when TLS turned off.
1266 kes Ensure that when labelling a tape with Slot=0 that InChanger
1268 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1270 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1271 add DISTINCT (required by PostgreSQL).
1272 kes Implement BSOCK authenticate_director() method. Eventually will
1273 authenicate all daemons.
1274 kes Move several more functions into the BSOCK class.
1276 kes Add code to tell the OS that we no longer need a cached
1277 file that we were reading. In findlib/bfile.c. Also,
1278 only cache files that we are reading. Thanks to
1279 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1280 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1281 kes Implement script to automatically generate cats and dll .def
1282 files for Win32 dll.
1283 kes Update README.mingw32 to include new .def file generation.
1284 kes Correct typo in UTF-8 error message as reported by:
1285 jhernandez <julianhernandez@gmail.com>
1286 kes Add additional sm_check() code on debug level 1.
1287 kes Set default debug level to 1.
1288 kes Trap SIGABRT in attempt to get traceback.
1290 kes Reduce bat connect timeout from 30 to 15 seconds.
1291 kes More restructuring and implementing BSOCK class in place of
1293 kes Remove a few unnecessary malloc() tests in crypto code.
1294 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1295 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1296 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1298 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1300 kes Fix Verify InitCatalog. The attributes were not pointing to the
1301 correct saved location.
1302 kes Implement message callback so that GUI is sure to get all
1303 daemon messages. Currently displayed in a dialog in bat.
1304 kes Ignore SIGUSR2 (Bacula timer) in bat.
1305 kes Apply regress patch from bug #859 to allow regress to work
1306 with Solaris compiler.
1308 kes Begin adding TLS support to bat.
1309 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1310 clean up lex.c and make it more readable.
1312 kes Move more bnet functions into the BSOCK class.
1313 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1314 kes Complete change of berrno strerror() method to bstrerror()
1316 Release: 2.1.10 beta
1318 kes Cleanup incorrect email addresses in bsmtp.
1319 kes Make bat display initial messages rather than discard them.
1321 kes First cut of adding .mod to the run command.
1322 kes Implement auto display of messages in bat.
1323 kes Enhanced preferences to allow all Bacula output to be
1326 kes Try to make bsmtp date routines more generic.
1327 kes Fixed bug #856 autochanger documentation.
1328 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1329 kes Add new cats entry point so Win32 builds.
1331 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1333 kes Do better checking for the MySQL 64 bit libraries looking for both
1334 .a and .so libraries.
1335 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1336 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1337 kes Require the thread safe version of MySQL during configure. Thanks
1338 to Andre Noll for pointing this out.
1339 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1340 continuing in migration code.
1341 kes Apply implementation of tray-monitor font derived from gnome-console
1342 submitted by Andreas Piesk <a.piesk@gmx.net>
1344 kes Eliminate important memory loss in SQLite
1345 kes Fixed the batch insert MySQL thread specific data that was not
1346 being freed. See cats/mysql.c:db_thread_cleanup().
1347 kes Fix restore before command.
1348 kes Convert old hdr.name to name() in a few places.
1349 kes Implement update jobid command.
1350 kes Return all time_t dates in db_get_job_record()
1351 kes Stop watchdog in SD earlier.
1352 kes Put Pool just after Storage in please mount message.
1353 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1356 kes Update the po files.
1357 kes Fix Verify InitCatalog by making it cache attributes.
1359 kes Change name bacula-bat to bat for man 1 page to correspond to
1361 kes Check for client and store NULL pointers in status command. This
1363 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1364 kes Fix sign extended editing of %p.
1365 kes Clean out a little old #ifdefing in cats/mysql.c
1367 kes If time diff between DIR and FD is more than 600 seconds convert
1368 INFO message to WARNING.
1369 kes Implement heap size display in status for all daemons.
1370 kes Attempt to fix MySQL db open memory loss (not successfull).
1371 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1372 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1373 Query. This looks like a MySQL but but by doing extra releases,
1374 the memory goes away. This should fix bug #847.
1376 kes When backup fails, cancel SD before waiting for sd termination.
1377 kes If SD is waiting for FD to connect during cancel, wake up the
1379 kes Fix fsf code so that errno is correctly reported.
1380 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1382 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1383 so that Bacula doesn't later stumble into a seg fault.
1384 kes Use the term Restore Client in the restore Job report.
1385 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1386 the original job's FileSetId.
1387 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1388 spooling in migration jobs. Not yet tested.
1389 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1390 reading conf file from a pipe. However, do it with open_bpipe()
1391 rather than popen. Not yet tested.
1393 kes Fix an ugly bug where the VolCatBytes were getting updated
1395 kes Implement bconsole memory command that prints current memory
1396 usage, plus smartalloc dump.
1397 kes Clarify some error messages in backup, admin, and migrate.
1398 kes Shrink label dialog to smaller size.
1399 kes Invert Cancel OK buttons on restore to be OK Cancel.
1400 kes More strerror() to bstrerror() conversions.
1402 kes Start implementing bstrerror() in place of strerror().
1403 kes Stripping path -- seems to work.
1405 kes Prevent door and port files from being restored (mostly
1407 kes Free an unreleased buffer in compat code.
1408 kes Change console Job name from *Console* to -Console- to eliminate
1409 Win32 filename problems. Put Win32 path separator when creating
1410 Console file. This fixes bug #846.
1411 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1413 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1415 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1416 to force Win32 error message.
1418 kes First cut strip path. The data should be passed to the FD,
1419 but nothing is done with it yet.
1420 kes Enhance the digest and signature routines in the crypto
1421 library to accept a JCR and to use it to print error messages
1422 so that they will go in the Job report rather than the daemon's
1424 kes Simplify some of the verify signature code.
1425 kes Simplify a few of the alternative returns in the signature
1428 ebl Use only POSIX regex instead of GNU regex in breg.c for
1429 File relocation. It fix broken freebsd compilation.
1430 kes Convert all other Dir files to use new ua class message
1432 kes Tentative fix for missing digest signature in bug 807.
1433 kes Correct handle problem in new win32_ftruncate routine.
1434 kes Convert ua_purge.c and ua_update.c to use new ua class
1435 message routines for bat.
1437 kes Correct incorrect installation of LICENSE in Win32 installer.
1438 kes Display LICENSE at the beginning of the Win32 install.
1439 kes Attempt to correct the need for the png files to be installed
1441 kes Reapply my bat.conf install script in qt-console. I think I
1442 editted bat.pro instead of bat.pro.in and it was lost.
1443 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1444 the /var/lock/subsys for subsysdir. Also corrects typos in the
1447 kes First cut update job.
1448 kes Correct configure to include qmake of src/qt-console directory.
1450 kes Make restore job yes/mod/no print in one command so GUI works.
1451 kes First cut implementing backup and restore client.
1452 kes Correct editing in Verify output that caused a seg fault.
1454 kes Insure that bat.conf is not overwritten during installation.
1455 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1456 while I was implementing migration in March 2006 !
1458 ebl Cleanup file relocation, using char *RegexWhere instead of
1459 char *where + bool where_use_regexp
1460 kes Update some manpages and add bat manpage.
1461 kes Make a first cut at converting bacula.spec.in for bwx-console
1463 kes Apply patch from John Goerzen to add hostname as fourth argument
1464 to make_catalog_backup script.
1465 kes Fix typos I introduced into bsmtp.c
1466 kes Make pm_strxxx() routines handle input of NULL pointer. This
1467 is to protect from NULL pointers returned from SQL databases.
1468 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1469 kes Add more debug to FIFO code -- fix fifo regression test.
1471 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1472 kes Add thread timer to bnet_connect() to break from OS if wait time
1475 kes Update Win32 build to include new files, new symbols, and
1477 kes Implement socket level heartbeat (tcp_keepidle)
1478 ebl Commit File relocation patch
1479 kes Make bat have 'make install' target.
1480 kes Warn during install if old gnome-console binary found.
1481 kes Warn during install if old wx-console binary found.
1482 kes Add -8 option to bsmtp command line to add content type utf-8.
1483 Fixes bug #809. (Character coding problem in bsmtp).
1484 kes If < is found in target (from, to, cc) then do not enclose the
1485 target in < > in bsmtp. Fixes bug #772 (malformed address).
1486 kes When printing certain items in dbcheck, stop after 300000.
1487 Fixes bug #822. (dbcheck loops).
1488 kes Incorrect status in Dir after waiting for mount with poll set.
1491 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1493 kes Print waiting to reserve a device every 5 mins.
1495 kes Don't call close_part in label.c if tape and relabel.
1496 kes Don't free volume if busy in close() -- should help with
1498 ebl Fix #824 RunScript bug (After script could be execute twice)
1499 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1500 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1501 Add a regression script to test RunScript
1503 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1506 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1507 deprecated. No additional bugs will be fixed, and they will be dropped
1508 in a future release (probably 2.4.0).
1509 kes Change name of wx-console to bwx-console to make it more Bacula
1511 kes Change the name of gnome-console to bgnome-console to make it
1514 kes Some time in March, a Feature Request with patch from Jorj Bauer
1515 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1517 The ability for the director to validate a Client (FD) CN against
1518 an arbitrary set of patterns rather than the hostname, with
1519 A new 'TLS Allowed CN' set of directives which are implemented
1520 in the Client resource. Then pattern matching is used in place
1521 of hostname matching against the Certificate's CN. As an example, we
1522 have certificates which (a) use a local CA, and (b) have a CN of the
1524 kes Add new/changed entry points to Win32 build
1525 kes Create unaccepted-projects for projects that are not accepted.
1526 kes Simplify locking in the reservations system.
1527 kes Add more debug code in reservations.
1528 kes Make sure error condition on reserving a volume is handled correctly.
1529 kes Correct handling of volume_in_use.
1530 kes Correct handling of initializing a device.
1531 kes Move handling of broadcasting releasing a device into release_device().
1532 kes Correct attaching dcr to dev so that it is only done if device
1533 is properly initiated.
1535 kes Locking debug level tweaks in SD.
1536 kes Tweak new Volume code.
1538 kes Add exec external-command [wait-seconds] to bconsole. This
1539 executes the external-command. Note! normally external-command
1540 should be enclosed in double quotes.
1541 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1542 it should normally be off in a production system.
1544 kes Implement die command for SD so that we can force it to dump.
1545 kes Implement SD lock debug code.
1546 kes Implement new algorithm for keeping Volume list in SD. It
1547 is now owned by the device.
1549 kes Implement new code for freeing in use volumes that should
1550 resolve if not all, some of the problems of multiple drive
1551 tape conflicts described in bug 801.
1553 kes Fix gui/bacula-web/images files in svn.
1554 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1556 ebl Fix a bug in batch mode (in string escape)
1557 kes Correct migration prune SQL typo that crept in in a
1558 recent 2.1.x change.
1560 kes Move bnet_despool() into class in bsock.c
1561 kes Modify job report to include director name and Build OS.
1562 kes Move drop root privilege and check_catalog() before fork.
1563 kes Add update database scripts (version 9 to 10) to updatedb directory.
1565 ebl Check size and age of each file after its backup to see if
1566 it has changed during backup, if 'checkfilechanges' is set.
1567 The FD will do an extra check (stat(2)) after
1568 each file backup. mtime, ctime and size are compared with
1569 'before backup' information. If time or size mismatch, an
1570 error message will be generated. You must upgrade FD to use it.
1572 kes Make database name and user configurable
1573 --with-db-name=xxx --with-db-user=xxx
1574 kes Add back database type to message.c for debugging.
1576 kes Implement dir_sql() which issues an SQL query.
1577 kes Modify bat medialist to use dir_sql() and do some minor C++
1578 formatting as well as eliminating a number of pointers, simplifing
1581 kes Fix some of the mtx-changer grep commands for tape label readers.
1582 kes Convert a number of bsendmsg into the appropriate send/warning/error
1583 message class calls.
1584 kes Suppress the using database message in the .sql command.
1585 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1587 kes Add context menu for floating a window.
1588 kes Some minor cleanup and name changes in qt-console
1589 kes Add doing mt setblk 0 in Win32 mtx-changer.
1590 kes Apply Martin's bug fix to move definition of ENODATA for
1592 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1593 sqlite2 and sqlite3.
1595 kes More pruning cleanup.
1596 kes Turn on wait_for_drive by default in mtx-changer.
1597 kes Turn on Batch insert code by default as it now passes regression.
1598 kes Add ./configure --enable-bat to enable building of Bat.
1599 No install yet though.
1601 kes Implement a new .sql command for bat.
1602 kes Implement code to turn off pruning in obtaining the next volume.
1603 Pruning is turned off for the status dir command, but turned on
1604 for SD requests and for the list nextvolume command.
1606 kes Correct Qmsg() that was not updated correctly when committing a
1607 previous change (probably the recent TLS patch).
1609 kes Write new subroutine is_volume_purged() that explicitly checks
1610 if the Volume is purged, and if so marks it as such. This should
1611 resolve problems reported about needing to mount twice to recycle
1613 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1614 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1615 amount of duplicated code.
1616 kes Do volume pruning only for the Media Type desired (reduces pruning time
1617 if multiple Media Types are in the same pool).
1618 kes Implement more detailed info in the Job report for the Bacula version
1620 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1622 ebl Add bbatch tool to bench database and insert mode.
1623 Fix sql quote stuff in batch mode
1624 Fix sql stuff for mysql
1626 kes Correct problems with am/pm scheduling. Fixes bug #808.
1627 kes Implement new prunning code that prunes up to 1000 jobs at
1628 the same time. The same technique can be applied to a number
1629 of other prune/purge subroutines.
1630 kes Add an insanity check when starting a new tape job to ensure
1631 that the tape position has not been changed. If so fail the
1633 kes Fix Win32 build for dlls to add the folllowing:
1634 src/lib/bsock.c -- new file with new entry points
1635 src/lib/dlist.c -- new entry points
1636 src/cats/sql_create.c -- new entry point
1637 src/cats/sql_cmds.c -- new DATA item exported
1639 ebl batch mode cleanup bscan-test is ok now.
1640 kes Implement SD code to check length of disk volume before appending.
1642 kes Correct return status on db_batch... routines.
1643 kes Add call to db_write_batch_file_records() to migration code.
1644 ebl Fix AfterJob timing
1645 kes Move the checking of the database in initializion of the Director
1646 to after we drop privileges. This avoids the need for both root
1647 and bacula access to the DB.
1648 kes Correct a misplaced variable definition in src/filed/backup.c
1649 kes Correct how the new batch insert db_create_attributes_record()
1650 uses the arguments. Caused a seg fault in bscan.
1651 kes Implement lock() and unlock() methods in DEVICE class.
1652 Implement block() and set_block(xx) methods in DEVICE class.
1653 kes Modify bnet_connect() so that it uses time() to check for the
1654 wait time expiring (on some OSes, some system calls may not
1655 return immediately).
1656 kes Modify Verify to obtain the previous JobId when it is actually
1657 running rather than at schedule time (as it was in 1.38.x).
1658 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1660 kes When checking pid in pid file, continue running if the pid is
1661 the same as ours. This occurs on IRIX after a system crash.
1664 kes Extend new GUI API.
1665 kes Make the ua structure a class, and implement send_msg(),
1666 error_msg(), warning_msg(), and info_msg().
1668 kes Apply fix from for building wx-console on the Mac from
1670 kes Implement new select mechanism for GUI programs.
1671 kes Reorganize initialization of stackedWidgets in bat.
1673 kes Add updated nagios plugin supplied by Christian Masopust.
1675 kes More bat implementation.
1676 kes File migrate bug with Pool Occupancy using mediaid instead
1677 of jobids. Fixes bug #795.
1678 kes Fix orphaned buffers in filed backup and verify due to
1679 crypto buffers not freed during errors. Fixes bug #789.
1680 kes Extend new GUI api code to tree commands.
1681 kes Ensure that tree and dot commands check console ACLs.
1682 kes Permit marking directory with trailing slash.
1683 kes Allow 20 console connections (instead of only 10).
1685 kes Add smartctl call to bacula-sd.conf as an example of getting
1688 kes Modify jobq.c to let simultaneous restore jobs run. This may
1689 cause them to fail if they cannot get a drive.
1690 kes Add Client Connect Wait to Storage daemon to permit users to
1691 modify the time the SD waits for a FD connection.
1693 kes Correct virtual changer check which was backwards. This caused
1694 volumes to be unloaded into slots already occupied.
1696 kes Apply Command ACL filter to JobId list in restore command.
1697 kes Correct typeo in var.c patch.
1699 kes Don't let Bacula prune File or Job records for the current Job.
1700 kes Fix variable substitution pad + inc bug reported (with patch)
1703 kes Correct SQLite log table index as reported by Luca Berra.
1705 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1707 kes Begin implementing new comm signals for API.
1708 kes Fix a few places in lib/message.c where the open fd may
1710 kes Continue implementing lib/bsock.c (real class). Make jcr,
1711 who, host, and port private. There are new methods to access
1712 them for non-class use. This required touching a number of files.
1714 kes Add LANG=C to autoconf/randpass so it works with languages other
1715 than English. Fixes bug #788.
1717 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1719 You will not be able to generate Include/Exclude list any more.
1720 It will be fixed soon.
1721 If you want to use this, you can apply
1722 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1724 kes Restore of sockets created false error messages because Bacula
1725 no longer restores sockets, but the code was still trying to
1726 set the attributes on a non-existent file. Reported by a user.
1727 ebl finish RecyclePool feature
1728 Media will takes Pool.RecyclePool
1729 when moving from Scratch to a Pool or when user will do
1730 update volume=xxx frompool
1731 To use it, add RecyclePool = aPool to your Pool resource
1734 RecyclePool = Scratch
1738 kes Expand new BSOCK class adding signal() and new BNET signals.
1739 kes Begin enhancing the dot commands adding a new API function
1740 that returns more information and will make it easier
1741 to interface to the Director from a program.
1743 kes Make DEVICE fd private. Its new name is m_fd, and can be
1744 obtained with dev->fd() outside the class. This is the
1745 first of many DEVICE members to be made private.
1746 kes Implement Michael Renner's idea on having a virtual disk
1747 changer. I made some minor modifications (e.g. I did not
1748 implement the Virtual Changer directive, but simply set
1749 the Changer Command to an empty string.
1751 kes Implement a BSOCK send() method that writes the whole record
1752 in a single write() request rather than in two.
1753 ebl add update volume=xxx recyclepool=yyyy
1754 volume takes recyclepool from pool when using update volume=xxx from pool
1756 kes Fix encryption deblocking bug, which caused some restored files
1757 to be truncated. This fixes bug #763.
1758 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1759 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1761 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1762 ebl Use btime_t instead of uint64_t in media patch.
1764 kes Optimize the use of the database a bit in the Status dir command.
1765 Only open it when needed, ensure that if any previous database
1766 was opened, it is closed.
1768 kes Correct VolCatBytes bug from media patch.
1769 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1770 in the case of orphaned records.
1771 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1772 and File records in 300K chunks to be more efficient. This
1773 idea came from Juan Luis Frances (if I remember right).
1774 kes Apply Eric's scratch patch that moves a purged Volume to
1775 the RecyclePool. Question: how is RecyclePool set? what
1776 happens to the ScratchPool?
1777 kes Apply Eric's media patch that collects read/write media
1778 times as well as byte counts. This patch requires a
1779 simultaneous upgrade of the DIR and SD. Note, there
1780 should be some way to turn off timing. I'm not sure
1781 times are in Bacula units.
1782 kes Apply Eric's batch-insert patch.
1784 kes Update projects list.
1786 kes Implement Include/Exclude file lists in FD as dlists using
1787 the new dlistString class. This permits efficiently having
1788 large include/exclude lists and completes project Item 25.
1789 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1790 console is authorized to cancel the job. This fixes bug
1792 kes Modify SD so that the VolCatJobs medium record is updated
1793 at the beginning of a Job rather than the end. This
1794 fixes bug #775 where exceeding MaxVolJobs caused jobs
1796 kes Added a mutex around getting and setting Volume information
1797 so that multiple simultaneous jobs will single thread.
1799 Switch to using Subversion
1800 kes Remove src/pygtk-console/ from configure
1802 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1803 plus the entrypoints.
1804 kes Apply patch supplied that corrects debug print
1805 in canceling jobs for max run time. Supplied as
1806 part of bug #621, which was previously fixed.
1808 kes Test on job_canceled() and sd_msg_thread_done inside
1809 loop starting the message thread to avoid a race condition.
1811 kes Remove rl_catch_signal from console.c as it conflicted
1812 with the header definition. Fixes bug #765.
1813 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1815 kes Clarify some stored/acquire messages to indicate if the
1816 problem is with read or append.
1818 kes Fix memory leak with storage ids in cats/sql_get.c
1819 kes Terminate watchdog earlier to avoid reference to released
1820 memory -- reported by Jason Austin.
1821 kes Move closing the database from jobq.c to the director daemon
1822 termination routine. This fixes memory leaks for shadow jobs
1823 (i.e. migration jobs).
1824 kes Free up the unique jobid chain items in migrate.c. This fixes
1825 a memory leak problem.
1826 kes Convert some ugly looking for statements to use foreach_alist
1827 in findlib/find.c. This will facilitate converting the structures
1828 to use dlist (for large include/exclude lists).
1829 kes Fix a bug in the btree.c and btree.h routines, then rename them
1830 rblist and add them to be built in src/lib. Include some new
1831 methods written by Rudolf Cejka that make the code more readable
1832 (hides some of the ugly casting).
1833 kes Add set_next() and set_prev() methods which make the code much more
1834 readable. Also add a new dlistString class that facilitates storing
1835 strings in dlists. To be used in the large include/exclude lists.
1836 kes Make some trivial modifications to lib/tree.h that use rblist
1837 rather than dlist for storing the tree links. This was suggested
1838 by Rudolf Cejka. The result of this is that the restore tree now
1839 uses red-black binary trees rather than simple linked lists. This
1840 should give rather dramatic speed improvements for directories
1841 contining large numbers of directories/files (more than 10000).
1843 kes Fix maxruntime bug #621.
1845 ebl Implement the include JobID in spool file name project.
1846 kes Reorder projects file in order determined by Jan 2007 vote.
1847 kes Implement item #12 on project list -- quick release of FD by
1849 kes Fix open of SQLite3 db where user does not have write permission
1850 so that DIR does not crash. Fixes bug #761.
1852 kes Add back missing @ in Win32 Makefile.
1853 kes Change 'Device not configured to autolabel' from INFO
1855 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1856 which should restart an indefinite # of times.
1857 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1858 other DIR specifications.
1860 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1861 Fix path quoting in SQLite scripts.
1862 Fix problems with SHGetFolderPath.
1864 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1866 kes Fix Job restart on error bug that promotes an Inc to a Full
1867 backup. This should fix bug #755.
1868 kes Add qt-console and first cut of code.
1872 kes Fix Bacula->Documentation link on Win32 to point to index.html
1873 instead of bacula.html. Fixed bug #750.
1874 kes Return JobId in db_get_job_record() when JobId==0. This should
1876 kes Do not release source pointers when restarting a failed job.
1878 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1879 This *should* fix bug #747.
1880 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1883 kes Modify USTORE constructor to set an empty store_source string,
1884 and don't copy the store_source string in a cancel. Hopefully
1885 this will fix Arno's seg fault, bug #744.
1886 kes Add back code to disable conio in configure. Fixes bug #743.
1887 kes Correct the Options scanner in the FD to correctly handle
1888 SHA1 option, which was eating the next option. Reported by
1890 kes Add code to indicate when the SD is spooling, spool wait, and
1891 despooling as requested by Alan Brown.
1893 Version 2.0.0 released: 4 January 2007
projects / bacula / bacula / blob