1 Technical notes on version 2.5
5 command separator in console (!$%&'()*+,-/:;<>?[]^`{|}~)
6 examples/database/dbcheck.sql
7 enhancement to wait command: wait mount ...
9 filepattern (restore with regex in bsr)
14 ebl Turn on db_get_file_list() single SQL because the failure
15 was due to a full FS. And the accurate test fails with the
18 ebl Fix a bug that doesn't update RecyclePool all the time
19 during the first startup.
21 kes Turn off db_get_file_list() giant SQL because if fails on
22 my production machine.
23 kes Fix bat.pro.in so that bat is properly installed rather
26 kes Modify search for .conf file so that if one is given on
27 the command line, it will be used, otherwise it will use
28 the SYSCONF directory. It will no longer look in the current
29 directory unless explicitly requested on the command line.
31 kes Fail a job that references a plugin if no Plugin Directory is
34 kes Fix bug #1211 crash during reload with bad dird.conf file.
36 ebl Add detection of intptr_t and uintptr_t to configure process
38 ebl Change some cast to use intptr_t instead of long
40 kes Apply acl_solaris_update.patch submitted by Marco (thanks).
41 kes Remove configure check for resolv.h -- it is apparently not needed
42 and causes build warnings on FreeBSD.
43 kes Ensure that the installer and newinstaller Makefiles are called
46 kes Apply Eric's fix for suppressing extended attributes error messages
47 when dealing with deleted files.
49 kes Add src/win32/newinstaller -- single file installer
50 kes Attempt to explicitly call gmake when needed, or if not found
51 skip the calls. This should fix the FreeBSD regression/build.
53 kes Fix bat.pro.in so that bat will install.
55 kes Add more debug output to VSS init.
56 kes Attempt to correct win32 debug in berrno.
58 kes Fix bug reported by Dan where make fails in clean of src/win32.
60 kes Fix bug #1212, SD is unable to recycle purged volumes. fstat()
63 ebl Despool attributes directly from the director if attribute
65 Beta Release 2.5.28-b1
67 kes Fix bat install broken by $DESTDIR change.
69 kes Fix annoying compiler warnings in console/conio.c
70 kes Fix win32 build (depended whether or not ./configure was run).
72 kes Apply fix suggested by Bruno Friedmann to configure.in to
75 kes Turn on Eric's match_bsr tape block checking code.
76 kes Correct values used for tape block numbers in record.c.
78 ebl Fix a problem with PoolUncopiedJobs option which was broken
79 by the new JT_JOB_COPY type.
80 kes Fix bug #1206 -- Error: sql_update.c:194, which was probably
81 caused by the user modifying the Bacula DB schema.
82 kes Remove rogue line of C code.
85 Beta Release 2.5.16-b1
88 - Add "list copies" command
89 - Add JT_JOB_COPY type for job copies
90 - Don't allow copy jobs in automatic restore
91 - Promote next copy job as backup when original job is deleted
92 kes Closed bug #1207 -- 2.4.4-b1 strange volume/device handling
93 kes Closed bug #1204 -- Undescriptive help options
94 kes Closed bug #1202 -- Revise documentation
95 kes Closed bug #1178 -- Bat 2.4.3 tries to double-purge volumes
97 kes Closed bug #1166. Fixed by Eric -- Problem canceling job if
98 client looses connection while being backed up.
99 kes Fixed bug #1200 -- inconsistent auto purge documention
100 kes Fix documentation for Recyling ambiguity. Fixes bug #1200.
101 kes Remove old mmap code from compat.h/cpp
103 kes Correct typo in Win32 Makefile editing
104 kes Correct typos in debug output.
105 kes Improved error detection in creating bsrs.
106 kes Add debug code to Win32 restore
109 ebl Cleanup director VolParam struct
111 ebl Replace File:Block in BSR by Address to fix #1190
113 kes Correct missing return in Darwin code.
115 ebl Copy joblog after a Copy job
117 kes Tweak block.c read to more closely simulate write for computing
118 block addresses and turn on disk block testing.
119 kes Implement a crude 'list joblog' mostly for debugging.
121 kes Fix Migration bug #1206 sql error with NULL FileSetId when no jobs
123 kes Fix Migration JobLog bug #1171. Get the JobIds correct.
125 ebl Fix segfault in bscan when using debug mode
127 kes Fix configure to do minimum Win32 configure so that make clean
129 kes Tweak modify FD header to use %ld instead of %d.
130 kes Remove hand scanning of FD header in SD and use Bacula's
131 sscanf, which is now OS independent.
132 kes Define new object (file/dir) begin and end Volume label records
134 kes Use new method of defining XATTR #defines to avoid need for having
137 ebl Rename all STREAM_ACL_..._T into STREAM_ACL_..
139 ebl Add a new lock manager that can detect deadlock situation
140 This new option is activated with a --enable-lockmgr configure
142 ebl Add new Director->MaxConsoleConnections directive
144 ebl Fix bacula-sd hanging after tape gets full + unload
146 ebl Remove extra db_lock() in get_prune_list_for_volume()
147 ebl Apply 2.4.3-prune-deadlock.patch that fixes a problem when
148 using Catalog as message backend.
150 kes Apply Marco's Darwin xattr patches.
154 kes Apply Marco's Extended attribute support patch.
155 kes Update projects file
157 kes More changes to ensure that during thread switches the jcr
158 is removed from the TSD.
159 kes Ensure that consoles attach jcr to thread, and that only the
160 thread attached is removed from the TSD.
162 kes Move definition of FileId_t to bc_types and define it once in the jcr.
164 kes Remove all time_t from arguments in favor of utime_t, which is
166 kes Add more debug to match_bsr.c and use %u for unsigned debug editing.
168 ebl Apply patch for bug #1182 about Recycle flag
169 that is not updated after a pool change.
170 kes Since the user has been warned, allow console purge command
171 to purge volumes that are in use. This is a fix for bug
172 #1191 before it was submitted.
173 kes Fix Win32 build to add new sd_plugins.c
174 ebl Apply patch from bug #1175 that reset the Slot and the Inchanger
175 flag in db_make_inchanger_unique().
176 ebl Remove a Emsg() after recieving a Fatal signal that can lock
179 kes Apply patch from bug #1187. It prints an error message if the
180 Maximum Block Size in the SD is too big.
181 kes Increase Maximum Block Size to 2,000,000 bytes.
182 kes Use doubly linked bsr list so that consumed bsrs may be
183 removed. Removing not yet implemented.
185 kes Implement a fix that very likely fixes the undesired volume
186 purge reported by Graham Keeling.
187 kes Implement bsr block level checking for disk files. However,
188 it does not work correctly in accurate tests, and all the
189 migration and copy tests, so it is turned off.
190 ebl Make SD plugins work.
192 ebl Apply Riccardo's patch to compile bacula+mysql on mandriva
194 ebl Add more variables accessible through the director plugin
197 ebl Do work on plugins
198 - fix compilation of the director plugins
199 - add plugin list to status dir output
200 - add director plugin dump after a fatal signal
201 ebl Apply Riccardo's patch that fix some win32 compilation errors
202 and a bug with bat version browser.
204 ebl Add Plugin debug after a fatal signal.
205 ebl Add db and rwlock debug after a fatal signal.
207 ebl Fix maxwaittime to fit documentation, this time is now counted
208 from the job start and group all wait periods.
209 ebl Add tips for postgresql to improve performance when having
210 multiple batch insert at the same time.
212 ebl Remove extra debug for db lock.
214 kes Apply Riccardo's second patch that cleans up the #include
215 file order + a few Win32 particularities to make bat work
217 ebl Add allow_transactions flag to mysql db backend.
218 kes Apply win32-fixes patch from Riccardo that makes the Win32
219 bat more stable and faster (but still slow).
221 kes Fix bug with job name duplication if more than 60 jobs created
223 kes Correct some bugs of cleanup in SD if the FD connection fails.
224 ebl Add code to get more information after a fatal signal.
226 ebl Apply Bastian's patch that add spooldata=yes|no option
229 ebl Fix bash shell to sh shell in database creation script
231 kes Fix orphaned jobs (possible deadlock) while pruning.
232 kes Use jcr stored in bsock rather than searching in getmsg.c.
233 This results in about a 5% speed improvement with four
235 kes Implement win32_chmod that uses wide characters, if possible,
236 to get and set the file attributes.
238 kes Apply pane freezing during updates patch from Riccardo Ghetta.
239 kes Rework next_vol and autoprune a bit due to failure in
240 recycle-test. prune_volumes() now returns no status,
241 but should prune at least one Volume, if possible.
242 kes Modify check_if_volume_valid_or_recyclable to reject a
243 volume with Recycle set off.
244 kes Modify prune_volumes() to continue if volume Recycle is off
245 or if the volume has expired. Add more debug.
247 kes Fix bug #1046 VolumeToCatalog incorrectly reports mounted
248 filesystems as missing on the Volume.
249 kes Rewrite the set_jcr_job_status() code to include job status
250 priorities so that more important status changes occur but
251 lower priority status changes will not overwrite something
252 more serious. This could possibly cause reporting incorrect status
253 reporting in some cases. More testing is needed to ensure
254 I have the right priorities. This vastly simplifies the previous
256 Verify Diff status should now be correctly reported, whereas it
258 kes Reduce some debug output.
259 kes Apply Joao's patch to SQLite tables to make chars work.
261 ebl Fix #1175 About update slots that don't reset InChanger flag when
263 ebl Fix #1173 where prune_volume() returns a volume from the scratch.
265 kes Remove jobq.c constraint that read and write SD must be
266 different. This may lead to more deadlocks in the SD,
267 but they should be resolved there.
268 kes Ensure that job report is always printed even if job is failed
270 kes Don't print job report twice for failed VBackup jobs.
272 kes Fix editing of retention time difference to use 64 bit
273 int instead of 64 bit unsigned. This should permit very
274 long retention periods.
275 kes Implement code to prohibit a write job from appending to a
276 Volume that will be used for a read operation. This is
277 new code and could possibly cause some conflicts.
279 kes Integrate James Harper's Exchange Win32 plugin patch.
280 kes Apply patch from Marco van Wieringen that implements the new
281 Solaris libsec interface for ACLs so that Bacula can save and
282 restore both the new ACLs and old ACLs.
283 kes Marco's patch also corrects the file dependency generation code
284 so that it works properly both with shared libraries and static
286 kes Marco's patch also includes a small cleanup of the cats Makefile
287 to remove some references to non-existent files.
289 kes Modify win32 Makefiles to use full paths in most cases.
290 In particular add MAINDIR environment variable that points
291 to the main Bacula source directory.
293 kes Add read volume list code to SD -- not yet used.
294 kes Add James' binutils patch
295 kes Split volume management code out of src/stored/reserve.c into
297 kes Modify configure to do an automatic make clean. This ensures
298 that any changes to ./configure options are handled correctly.
300 Beta version 2.5.16 release:
302 ebl Rename JobStat table to JobHistory
303 kes Ensure that only normally terminated jobs are migrated.
305 kes Add Makefile dependency when using LIBTOOL_LINK so that any
306 change in ./configure options will be accounted for.
308 kes Fix typo in the ACL patch that I overlooked.
309 kes Apply Marco's libtool include patch.
311 kes Apply Bastian Friedrich's ACL patch to eliminate ACL
312 errors during restore.
313 kes Minor cleanup of create_restore_volume_list() code.
314 kes Fix typo in console Makefile.in
316 ebl Fix #1110 about RunScript that can't execute a script with
317 Unicode characters in the path.
319 kes Apply tray-monitor patch from Bastian Friedrich to make it
320 work with the new FD.
322 kes Apply cleanup patch from Marco
323 kes Apply patch from Marco van Wieringen <mvw@planets.elm.net>
324 that implements libtool to create shared objects out of
325 the Bacula libraries.
326 kes Fix tray-monitor so it will speak to new FD.
327 ebl Fix bug with ANSI label when volume name length < 6
328 ebl Fix segfault in debug level > 50 with btape.
329 ebl Remove warning message in btape when command is empty.
330 kes Fix Win32 build to pull in new BACULA define.
332 kes Change IncludeDir to Exclude Dir Containing.
333 kes Implement code to prohibit ExcludeDirContaining in an
334 Exclude section (same for Plugin and Options). A bit
335 of a kludge with RES_ITEM2 ...
336 ebl Add field to command list to restrict Runscript console
338 ebl Use a separate JCR when running Console command with Runscript.
339 ebl Permit to mark version as Beta in some outputs
341 kes Add plugin types in jcr.h to reduce need to cast.
342 kes Do better checking of plugin return values.
343 kes Free plugin context after calling pluginFree() as
345 kes Allow plugin to call JobMessage with NULL context.
346 kes Do not add plugin to global list if loadPlugin returns error.
347 kes Rework plugin.h a bit to reduce dependence on Bacula.
349 kes Move generation of bsr file for Virtual Backup to run section
350 so that it is generated just before actually running.
351 Suggested by Graham Keeling.
353 kes Add malloc and free Bacula entry points for plugins. Increment
354 FD plugin interface version. Create a Bacula plugin context
355 structure to keep track of whether or not the plugin is disabled.
356 kes Apply FileIndex fix for plugin name stream suggested by James.
357 kes List plugins in FD status report when debug > 0.
359 ebl Add a new VerId variable that is printed in version command.
360 kes Fix migration SQL not to migrate a job that has not terminated.
361 This is a partial fix to bug #1164.
362 kes Sort JobIds returned from db_accurate_get_jobids() to fix Virtual
363 backup start time bug reported by Graham Keeling.
365 ebl Fix possible bug in cancel_job() with job that are not
368 kes Fix bat build for Win32.
370 kes Copy plugin link field into ffpkt.
372 kes Integrate patch from Kjetil Torgrim Homme <kjetilho@linpro.no>
373 It provides FileRegex in bsr files and code to collect regex
374 from the user during restore, an Allow Mixed Priorities feature,
375 and documentation for the above.
376 ebl Remove db Berkeley from configure process
377 kes Do dirty check on hostname (Linux only) and if not resolvable
378 use localhost as default.
379 kes Increase vtape max block to 20GB.
381 kes Refactor restore code to create a close_previous_stream(). This
382 This may destabilize the source.
383 kes Implement planned startRestoreFile() plugin call.
384 ebl Remove missing Loaded information from status slots storage command.
385 ebl Fix Console command problem that cancels the job
386 kes Add more plugin restore debug code.
388 kes Fix plugin_bwrite - plugin-blseek mixup pointed out by James.
389 kes Rewrite plugin restore interface a bit to correspond to how Bacula
390 creates and writes to the restored file.
391 kes Add some DebugMessage() calls to the bpipe-fd.c program.
393 kes Apply Marco van Wieringen's set of patches, cleans up Migration/Copy
394 Implement 'Pool Uncopied Jobs', allow Solaris Compiler to build
395 Bat; allow add and delete in place of mark and unmark.
396 kes Another attempt to fix the endRestoreFile plugin bug noted below.
398 kes Apply dbi driver patch from Joao.
399 kes Correct a bug in passing the context to the endRestoreFile() plugin command.
400 Bastien Friedrich reported the bug.
401 kes Create plugin instance only when FD job starts.
402 kes Add new FD plugin event: bEventCancelCommand when
403 a cancel command is issued to the FD.
405 kes Add cmd_plugin flag to jcr so we can globally know if a
406 command plugin is running.
407 kes If command plugin running, do not attempt (for the moment)
408 to get Win32 extended attributes.
409 kes Ensure that proper Win32 flags are set in bfile packet
410 if plugin_bopen() works on Win32.
411 kes Remove generated src/plugins/fd/Makefile
413 kes Implement build and install of bpipe-fd.so plugin.
414 kes Rework the interface that passes packets to the plugin
415 so that the packet is started and ended by the packet size.
416 This allows the driver to do a sanity check.
418 kes Rework the pluginIO Bacula internal code to enable
419 proper handling of Win32 error codes from GetLastError.
420 kes Apply Joao's patch to regress startover_libdbi.
422 ebl Add -B option to dbcheck to get catalog information
423 kes Fix Win32 build to include new library function.
424 kes Remove some old reader/writer code.
425 kes Implement ./configure --with-plugindir=xxx
426 ebl Fix the mysql bug in the new accurate code
427 kes Improve plugin debug. Create plugin test.
428 kes Set main thread specific data to INVALID because it
429 has no jcr. This allows debug output to work correctly.
430 kes Add src/plugins/fd/Makefile to ./configure process.
431 kes Make first cut attempt to correct SQL that computes the current
432 Pool usage. This is to fix bug #1159.
433 kes Do a bunch of plugin cleanups for Win32 and more careful checking
434 of PluginDirectory and whether or not a plugin was found.
436 kes This code should fix the race condition that leads to a Director
437 crash at job end time when the job list is updated. This was reported
439 kes Add more plugin documentation and fix include of config.h for
440 Win32 build (I hope).
442 ebl Revert to htable instead of rblist
443 ebl Cleanup accurate code (remove tcdbm parts) and use red/black
444 tree instead of htable.
445 ebl Use a dedicate DB link to compute and send the accurate list
448 kes Fix compile errors in filed/fd_plugin.c.
450 kes Remove all double quotes from SQLite creating script and
451 replace by single quotes as suggested by John Huttley.
453 kes Apply dbcheck patch from Yuri Timofeev <tim4dev@gmail.com>.
454 It significantly improves the performance of dbcheck for
456 kes Fix bad debug code call in src/filed/accurate.c
458 kes Change two Jmsgs in accurate to Dmsg to reduce unnecessary
459 output. Perhaps we really need to implement M_SAVED.
461 kes Fix bug #1156 FD crash during processing of Accurate data.
462 kes Tweaks to htable code to improved debugging and make names
463 a bit more meaningful.
465 ebl Remove time_t from update_stats()
467 kes Modify the license of the example plugin program to allow
468 it to be used by anyone for making a Bacula plugin.
469 kes Make apply_rp_codes() in bpipe-fd.c be static.
471 kes Remove Encryption and Accurate lines in vbackup output -- not used.
472 kes Fix subtle bug in vbackup by not changing DEV_RECORD packet.
473 kes Add host name to items printed during dump.
474 kes Make Check File Changes default on.
476 kes Set the default FD timeout to 3 minutes (previously 30).
477 kes Apply Bastian Friedrich's weird spelling correction patch.
479 kes Always print Verify hash differences. Rename variable to make the
480 code slightly more readable.
482 kes Correct tests for MaxFullInterval as reported by
483 Ulrich Leodolter <ulrich.leodolter@obvsg.at>..
484 kes Fix MaxDiffInterval code as well.
485 kes Enable Win32 plugin load code in lib.
486 kes Make Verify code that computes disk checksums use the same
487 algorithm as backup when dealing with sparse files.
488 kes Attempt to run VSS on any systems newer than Vista -- should
489 make it work on Windows Server 2008.
490 ebl Change the new statistic implementation. Remove the UseStatistic
491 directive and add a 'update stats [days=...]' command. You can
492 now decide when copy job records from Job table to JobStat.
493 Statistics are much more accurate with this.
495 kes Fix SQL case problem that may cause the failure of DiskToCatalog
497 kes First cut adding SD plugins.
499 kes Add Slot if it is non-zero to writing bsr file after a
501 kes Change a number of bnet_fsend() into class method calls.
502 kes Begin audit of diff of 2.4 branch to trunk code.
504 ebl Fix the mysql creation script that double-created an
505 index of the same field on the Media table.
506 Add an index to on VolumeName to the Media table for mysql.
508 kes Another try at fixing Vbackup. It looks much better this time.
509 Disable file index sanity check in FD with value stored in
510 attributes record because with Vbackup the File Index gets
511 changed, but not the attributes record.
512 Enhance some debug code.
513 Fix handling of re-indexing records that are copied in Vbackup.
515 kes Made level_to_str() know about Virtual backup.
516 kes Set correct Virtual backup write pool.
517 kes Fix compile warning in new dbcheck port code.
518 kes Fix migration code broken by previous virtual backup fix.
520 kes Fix problem of Virtual backup not writing a sequential FileIndex.
521 kes Reset Virtual backup time/date to the value from the last backup.
522 kes Ensure that storage name is passed to SD on read.
523 kes Correct a problem with Level and Virtual backup, rework how
524 bsrs are printed in debug to use standard routine.
525 kes Apply patch from Chris in bug #1133 that provides alternate db port
527 ebl Remove catalog dependency from bcopy tool.
528 ebl Modify catalog scripts to have an easier packaging integration,
529 using default variables.
530 Make difference between SQLite3 and SQLite in db_get_type()
532 kes Apply most of changes in a patch from:
533 Michael Stapelberg <michael+bacula@stapelberg.de>
534 that allow the Bacula FD to compile on IRIX 6.5.
536 kes Apply patch from Bastian Friedrich that accepts a yes on a
537 delete volume command line.
538 kes Attempt to fix bug #1128 InChanger flag cleared during Migration
539 job when reading from one autochanger and writing to another.
540 kes Minor tweaks (copyright dates convert to use method instead of bnet).
542 kes Fix NULL Volume error when reading (or Migration or VBackup) must switch
543 drives when no tape is mounted.
545 kes Add additional info to some SD messages.
546 kes Add fix supplied by Martin Simmons for turning off EOL character
547 in new console multi-command code.
549 kes Fix a Verify InitCatalog problem where in certain cases
550 a garbage filename may be entered in the verification database. This
553 kes Add VSS 64 bit dll entry point in src/win32/filed/vss_generic.cpp
554 sent in by Riyas Yoosuf.
556 kes Fix seg fault in Dir during estimate command with no level value
557 given. This fixes bug #1140.
559 kes Add message to migration job when the target job is already migrated.
560 This closes bug #1129.
563 kes Raise some restore debug levels.
564 kes Replace off_t by boffset_t where ever I found it.
566 kes Define a machine dependent ioctl request type for use with
569 kes When a migration job actually runs, re-check the Job record
570 and skip if the job is already migrated. This should
571 significantly reduce the problems with bug #1129.
573 kes Set MALLOC_CHECK_=0 in environment before starting Bacula to
574 turn off glibc checks that prevent getting good dumps.
575 kes Implement console 'wait mount' command. Doesn't yet work.
576 kes Implement timeout=nn on console 'wait mount timeout=nn' command.
577 kes Break the do_swapping into do_unload, do_swapping, and
578 do_load. It is much more logical that way.
579 kes Implement a set_dcr_from_vol subroutine in acquire.c for
580 reading volumes. This allows the dcr to be refreshed after being
581 zapped when the wrong volume is mounted.
582 This should fix bug #1126 -- During multiple tape restore, bacula
583 does not ask for physical tape change, but rereads same tape
585 kes Apply patch submitted for bug #1107 with a small modification.
586 This fixes a bug where bcopy copied too many records.
587 kes Make some tweaks to bsmtp based on patch submitted in bug #1124.
588 This fixes bug #1124.
589 kes Make the default bat restore Pool be Any. This fixes bug #1118.
591 kes Remove debug statement that crashes the SD at the end of
592 a tape during restore. Fixes bug #1125.
594 kes Implement Win32 bat changes made to Branch-2.4
596 kes Tweak separator command in console to start disabled and
597 allow defining no separator character. Also make code a
598 bit more fault tolerant.
599 kes Make btraceback write the traceback to the working directory
600 before attempting to mail it.
601 kes Add a RFC to Projects.
603 kes Attempt to implement a kludge to make Qt work with bat
605 kes Setup rstorage correctly. Virtual backups are working.
607 kes Move setting JobLevel and JobType into a method, which should
608 allow completing Virtual Backups.
609 kes Fix verify jobs to work again.
611 kes Virtual Backup tweaks -- it is close to working.
613 kes Ensure that SD tried to mount a volume not in an autochanger
614 at least once before asking for operator intervention.
615 kes Make SD aware of Virtual Backup jobs.
616 kes Add VirtualFull for bat.
617 kes Changes to get read storage correct for Virtual Backup.
619 kes Remove old code from label.c
620 kes Split display_display_info() out of write_bsr_file()
621 kes do_vbackup_init() working -- i.e. bootstrap file built.
622 kes Change Bacula trademark owner from John Walker to Kern Sibbald
623 kes First non-working cut of vbackup
624 kes Correct FD heartbeat code to use volatile variable accessed by
626 kes Zero thread id with memset if on Win32 in case it is a struct.
627 kes If cannot create JobMedia record, continue to try to write eof
628 and clean up in block.c
630 kes Add code to interface OpenSSL to new Win32 pthreads code which
631 used a structure for thread_t.
633 ebl tweak bat for win32 compilation
635 ebl Remove tokyo cabinet from the source
636 ebl Update configure/autoconf to support berkeley DB
637 ebl Add a sort to db_get_file_list() to improve bsr construction time.
639 kes Add a mtx-changer.conf file that is not overwritten during
640 an upgrade. It fully configures the mtx-changer script.
641 kes Clear in-use bit on vol when unused while swapping.
643 kes Remove sleep at end of ./bacula
644 kes Clear hash packet for hardlinked files correctly. This corrects
645 a long standing bug where hardlinked files selected individually
646 would occasionally not be restored.
648 kes Apply Eric's patch to ensure that autoprune does not return
649 a Volume not in the autochanger unless requested to do so.
650 kes Correct bat restore display of multiple drives. This fixes
652 kes Do find_a_volume() each time an unload is done. This
653 fixes the failure of maxvol2-test.
655 kes Add some SD debug code.
656 kes Do find_a_volume() each time an unload is done.
657 kes Apply Joao's DBI patch that adds easier configuration of DBI drivers,
658 and adds --with-db-port to ./configure.
659 kes Use Qmsg() in job.c watchdog callback.
661 kes Release main control rwlock if ABORTing.
662 kes Make watchdog connect timeout queue messages rather than sending
663 directly to avoid lock conflicts with the real thread.
664 kes Add const char in dbd.c to avoid compiler warnings.
665 kes Fix python compiler string warning. Note, IMO the GNU C++
666 compiler guys have made a *very* bad change to their compiler.
667 They now force all strings to be 'const' unless you explicitly
668 cast them, which is extremely ugly and ruins nice code as well
669 as creates a lot of useless work.
671 kes Fix mtx-changer to detect both versions of Ubuntu (Debian)
672 mt. This fixes bug #1116.
673 kes Add const in python files to reduce compiler warnings.
674 This may have to be backed out because of later compiler
676 kes Fix failure of 2drive-concurrent-test. Always read label;
677 clear_unload() only after drive is defined in acquire_for_read().
679 kes Generally clean up the manual tape loading code. The main
680 conceptual change is that when a volume is marked to be unloaded,
681 its volume name is retained, and it is only marked as unloaded
682 when either the autoloader says it is unloaded or another tape
683 is read on that drive.
685 kes Add debug code and refactor subroutine in stored/mount.c
686 kes Fix format problem in bscan output reported in bug #1105.
687 ebl Fix get_next_volume_for_append logic with autochanger
688 - use pruned volumes if found
689 - don't reset the inchanger flag after getting a recycled volume
691 Fix recycle_oldest_purged_volume to take InChanger flag in account
693 ebl Add mmap/unmmap implementation for tokyodbm under win32
695 kes Make first step toward eliminating globals from config
696 scanning. Also should be a workaround for FORTIFY_SOURCE
697 GNU C bug -- fixes bug #1042.
699 kes Apply duplicate job tests to restarted jobs.
700 kes Copy more data when restarting a job so that run
701 overrides are kept. This should fix bug #1094.
703 kes More word alignment cleanup.
704 kes Fix bug where SD did not ask operator if the device could not
705 be opened. Reported by Eric.
707 kes Add dbuser to DIR conf file (replaces user).
708 kes Add --with-db-password to ./configure
709 kes Fix regress to handle db_password.
710 ebl Add new 'status storage slots' that list autochanger
712 ebl Update vtape driver to compile only under Linux.
713 ebl Fix a bug when restoring with a wrong mediatype.
715 kes Eliminate ints from conf files and structures to avoid
716 word alignment problems
718 kes Fix bug reported by Scott Barninger where the bacula script
719 refers to scripts in the wrong directory. Needed to meet the
720 requirements of recent FHS location changes.
721 ebl Disable vtape for FreeBSD.
723 ebl Modify disk-changer to check if slot contains something before
726 ebl Fix vtape on win32 and debian.
727 ebl Fix autoselect patch (cause segfault).
729 ebl Fix autoselect option broken for a while. Fix #1089. Need some
730 work with StorageId to be able to use a particular drive in a
733 ebl Rename vtape to vtape.
734 ebl Update vtape driver.
736 ebl Modify vtape driver to avoid sparse file.
737 kes Add make clean of qt-source directory during ./configure
738 kes Store last block number written to tape in DEVICE and
739 use it for testing for correct last block on EOT.
741 Release Version 2.4.0:
745 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
746 This fixes bug #1095.
748 kes Add create_postgresql_database.sql to Win32 installer. Should
749 fix problem reported by Juilio Monteiro.
750 kes Get correct slot when auto unloading a device. This fixes bug
753 kes Fix multiple media restore.
754 kes Make DEVICE Slot private and access it via a method.
755 Allows better control over when it is set and cleared.
756 kes Fix possible seg fault if SQL error.
758 kes Add Martin's fixes to argument scanning for the estimate
759 command. This fixes bug #1093.
760 kes Add debug code to SD.
761 kes Fix renaming a Volume, which used the wrong Volume name.
763 kes If operator has rewind tape, print warning, release tape and
764 try once more. If tape is positioned somewhere, something went
765 wrong, so mark the tape in error and try once more. Previously
766 this error was fatal, now it produces an error message.
767 kes Ensure correct volume name displayed during restore
768 kes Ensure that Volume is mounted for restore.
770 kes Fix a few more Coverity reported problems.
772 kes Apply Allan Black's status dir job count patch.
773 ebl Add information about IMPORT/EXPORT slots in mtx-script.
774 kes Enhance a couple of SD debug messages.
775 kes Tweak unload flag setting and ensure it is set during swap.
777 ebl Fix #1091 about bad output in estimate command.
779 kes Modify autochanger locking to attempt to avoid race
781 kes Make sure device not busy before doing label command.
782 kes Display open() errors except when polling. Previously too
783 many were suppressed. This should fix bug #1070.
784 kes Fix Win32 reparse points. Bacula will not recurse into any
785 reparse point directory, including mount points, unless the
786 directory is explicitly mentioned at the top level (same as
787 with Unix). A file that is linked to another file will be
788 backed up -- much as Unix does for hardlinked files.
789 This fixes bug #1041.
791 kes Remove double quotes from ChangeLog and ReleaseNotes
792 kes Remove StorageId test when pruning and recycling (Eric's changes).
793 kes Remove old form of locking when getting volumes -- causes deadlock.
794 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
795 the name unique and to eliminate compile time error.
796 kes Add accurate.o to Win32 FD Makefile
798 kes Fix cats dll build on Win32 after db_update_job_end_record
799 calling sequence change.
800 ebl Switch to tokyo dbm instead of htable in accurate code
801 ebl Include tokyo dbm to bacula source tree
803 kes Fix buffer overruns detected by Coverity.
805 kes Tweak joblog display.
807 kes Implement --without-qwt
808 kes Fix layout of restore tree dialog
809 kes Add configure bat QWT libraries, so that bat can be built
810 with or without the QWT libaries.
812 ebl Add dummy tape driver for regression tests.
813 kes Make sure we unload the right slot when swapping.
815 kes Add debug times, reduce size of two-pool-changer test
817 ebl Tweak autoconf scripts for vtape
819 kes Improve SD reserve debug code.
820 kes Testing an improvement to free up volumes no longer in use.
822 kes Rework SD acquire for read to handle autochanger Volume
824 kes Implement regression that explicitly tests swapping a Volume
825 from one drive to another.
826 kes Enhance disk-changer to detect most error conditions.
827 kes Fix SD code so that it properly swaps a Volume between drives.
828 This fixes bug #1083.
830 kes Apply libdbi patch from Joao Freitas for regress and for
831 Bacula trunk. Regress now works with libdbi. Nice.
832 kes Apply .nobackup patch from bug #1077 submitted by
834 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
835 name into jobs cloned via the run directive.
837 kes Prevent a Volume that is being swapped from being freed from
838 the volume list. This will most likely fix, at least partially,
840 kes Fix strippath so that it does not get a buffer overrun and crash FD.
841 This fixes bug #1078.
842 kes Remove 50 millisec wait in SD that broke debugger.
843 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
844 that a job may run, counted from when the job was scheduled.
845 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
846 a job may block waiting for a resource, counted from when the job starts
847 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
848 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
849 that implements multiple commands per line in the console when using
850 readline. Modify the default to use a semicolon as the command separator.
852 ebl Fix SQL query in migration code.
853 ebl Make accurate mode with hash disk pass regression tests
855 ebl Implement first cut of accurate backup with hash disk.
857 kes Force unload of volume when wrong volume mounted in SD.
859 kes Fix bat seg fault at termination.
860 kes Add Bacula generated version to bat about box.
863 kes Experiment with allowing multiple read jobs.
864 kes Move final volume swapping code to DCR method and
865 call it from acquire_for_read().
866 kes When wrong volume is mounted during read, unload_autochanger.
868 kes Integrate the libdbi changes from Joao Henrique Freitas
870 kes Stop searching for Volumes in SD askdir if DIR returns the
871 same volume name twice in a row.
872 kes Close bat console windows first to eliminate error message
875 kes Tweak the swap Volume from one drive to another code so that
876 it now seems to work.
877 kes Resolve several problems with recycling that broke the new
878 code (these problems are in 2.2.9 as well).
879 kes Remove the volume lock when calling the sysop code.
880 kes Don't mark a reserved volume with no writers as unused otherwise
883 kes Rework class structures for VOLRES, DCR, and DEVICE to make
884 the method names a bit more logical, and for more logically
885 handling the responsibilities.
887 kes Remove redundant code in terminating the scheduler that just
888 causes a seg fault in many cases.
889 kes Cleanup releasing a volume and make it a DCR method.
890 kes Improve algorithm for detecting pre-reserved volume and
893 kes Tweak volume swapping code so it works.
894 kes Correct name overloading in mount.c
895 kes Replace released flag in VOLRES with reserved and add access
896 methods for the VOLRES class.
897 kes Prevent volume from being released while being swapped.
898 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
899 plugin that add %w (where) and %r (replace flag) editing to
901 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
903 kes Refactor parts of stored/mount.c
905 ebl Add sanity checks for VolWriteTime and VolReadTime
906 ebl Take care of bad clock changes while computing VolWriteTime
907 and VolReadTime. This should fix or limit #1066
908 kes Correct error string numbers in dird/catreq.c
909 kes Restructure reserving, acquiring, and mounting volumes. Calls to
910 autochanger are deferred for mount.c -- simplifes the code.
912 kes Do not prune any running job. It just fails the job.
913 kes Lock the volumes when changing dev->reserved_device and marking
914 the volume unused otherwise the device can get reserved by
915 another job before the volume is released, thus blocking it.
917 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
918 kes Fix bug #1063, reuse of freed ptr in list nextvol.
919 kes Release regex compile buffer in filed/job.c
920 kes Add proper type of const char in sql_create.c
921 kes Turn off debug in daemon termination routines
922 kes Move free_volume_list() before devices are freed in stored.c
923 kes Fix reference to uninitalized stack variables in bregex.c.
924 This should correct bug #1067.
926 kes Fix possible seg fault in SD when freeing a volume entry.
928 kes Implement unload_dev() before swap device.
929 ebl Add statistics prunning with option and menu
930 kes Separate unload_dev() from unload_other_device() in autochanger.c
932 kes Apply patch from bug #1069 that corrects spurious error messages
933 when ACLs enabled on SGI but no ACL exists.
934 ebl Fix small segfault in bacula-sd when debug level is 500
935 kes Modify run_program() and run_program_full_output() to use
936 call by reference for the results string. This corrects a long
937 standing problem where the address of the string may be changed
938 in the subroutine but not in the calling program.
940 kes Re-enable code to remember last volume mounted on a non-tape
942 kes Add patch supplied in bug #1068 that fixes a SD crash when using
943 a Virtual autochanger.
944 kes Generate correct JobMedia records during spooling/despooling when
945 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
946 <tih@hamartun.priv.no> for excellent analysis and testing.
948 kes Tweak hash algorithm for htable using Martin Simmons idea
949 for doing a circular shift.
950 kes Remember what volume is in VTLs (previously turned off for
952 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
953 pointed out some problems in creating JobMedia records during
954 spooling with concurrent jobs. Fix the problem by updating the
955 start file position before despooling and generate a jobmedia
956 record at the end of despooling.
958 kes Fix handling of JobMedia records during spooling and when a
959 Volume is changed without actually writing data to the Volume.
961 kes Rework certain SD locking based on gdb tracebacks of deadlocks
962 sent by Eric. This code now uses only the volume_lock() rather
963 than the reservations lock when at EOM and acquiring a new
965 kes Ensure only one exit point in several subroutines.
967 kes Implement bsock code to permit locking. Use the new code in Verify
968 in the FD to prevent the heartbeat thread from disrupting the Verify
969 data sent to the Dir.
970 kes Modify SD locking to eliminate locking the reservations system from
971 outside the system. Use the volume lock when getting media data
972 and reserving a new volume at end of media.
973 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
974 when SD starts are not locked into place.
976 kes Fix error compiling runscript code on 64 bit machines.
977 kes Tweak Win32 mount point code.
978 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
979 cleared giving bad file estimate).
980 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
983 kes Keep Schedule run lists in order as suggested by
986 kes Implement autostart scripts for Debian.
987 ebl Implement upgrade catalog scripts.
989 ebl Apply jobstat patch for long term statistics. Have to implement
990 purge stats command and upgrade scripts.
991 kes Fix mtx-changer.in for broken Debian mt program.
993 kes Fix large number of JobMedia records reported by Eric Bollengier.
995 kes Apply doc fix from bug #1062.
996 kes Resolve crash and improper restore wx-console Win32 restore
997 GUI. Fixes bug #1065.
998 kes Update Win32 wxWidgets to latest version.
999 kes Attempt to do correct handling of Win32 mount points. Should
1001 kes Fix Win32 FD backup/restore memory leak due to improper termination
1002 of BackupRead/Write. This fixes bug# 1038.
1004 ebl Reduce memory usage for accurate backup, working only with ctime
1005 and mtime. (not all Lstat field)
1006 About 40MB for my Linux system (400.000 files)
1008 kes Add dcr->reserved_volume flag that allows us to release a volume
1009 even if it is not vol->released. This allows maxvol2 to work when
1010 Volumes expire and we are already writing to the device (i.e. a
1011 volume is pulled out from under us by another job terminating after
1012 we reserve the drive).
1014 ebl Permit multiple command/console per runscript definition.
1015 RunScript { command = /bin/true ; command = /bin/false ... }
1016 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
1017 (restart an application) just after the VSS snapshot on windows.
1018 kes Don't zap dcr values during release_volume() as they might
1019 have the next Volume to be mounted.
1020 kes Fix AIX prototype.
1022 kes Second cut of drive switching during backup.
1024 kes Fix Win32 build.
1025 kes Update Win32 version of wxWidgets to most recent version.
1026 kes Tweak Copy job details.
1027 kes Rework dir_find_next_appendable_volume to make a bit more effort
1028 to find a suitable volume before giving up.
1030 kes Make ask_sysop_to_create... to return if waken from wait.
1031 This helps get out of blocked conditions.
1032 kes Experimental implementation of switch_device in reservations.
1033 kes Implement FD version to allow easier protocol changes.
1034 kes Add Plugin Options string -- not yet passed to FD.
1035 kes Implement PluginOptions ACL.
1037 kes Attempt to correct problems with restores with autochangers and
1038 use counts going negative
1039 kes Rework SD status command and implement API for bat. Implements
1040 header, runing waitreservation, devices, volumes, spooling,
1041 and terminated status keywords.
1042 .status storage=xxx <keyword>
1043 kes Clarify TLS error message by adding double quotes around name.
1044 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
1045 kes Pass jcr to tls routines so debug messages can be handled better.
1046 kes Rework jobq resource allocation code, and possibly fix a bug
1047 that caused reference counts to get out of sync.
1049 kes Rename fd/dir plugin to use Bacula standard underscore.
1050 kes Plugin work -- bring dir up to fd level.
1051 kes Start implementation of VTL code
1052 kes Fix Win32 build after adding new cats subroutine.
1054 kes First cut at Duplicate Job implementation.
1056 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
1057 kes Start PluginOptions string, and refactor a bit of ua_run.c
1058 ebl Apply Allan patch that permit to reset recyclepool.
1060 kes Test patch -- possible fix or improvement for bug #1053
1061 kes Refactor FD and SD status commands to permit new API code in
1062 SD, and to fix Win32 build.
1063 kes Win32 build is now working.
1065 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
1066 some ideas in patch from Scott Bailey.
1067 kes Begin implementation of duplicate Job control.
1068 kes Fix some of Win32 build after recent additions.
1069 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
1070 which causes the FD to detect whether or not the OS has the
1071 honor no dump bit (*BSD systems), and if so, to skip backing up
1072 any file with this bit set. The feature is enabled by setting
1073 'honor no dump flag = yes' in the Options section of a FileSet.
1075 kes Correct po warning message with datarootdir
1076 kes Implement more code in dird.c to put configuration parsing in
1077 a class rather than use globals.
1078 kes Restructure SD status command for implementation of bat API
1081 kes Suppress incorrect 'Will not descend from x into y' messages.
1082 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
1083 daemon globals used by parser.
1084 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
1086 kes Fix free of plugin_list when none exists.
1088 ebl Apply accurate project patch.
1090 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
1091 on non-mempool object)
1092 kes First cut of converting FD .status to work with bat API.
1094 .status client=XXX header
1095 .status client=XXX running
1096 .status client=XXX terminated
1097 kes Implement first cut of Copy Job.
1098 kes Implement Catalog in Pool resource. It overrides catalog specified
1099 in the Client resource.
1101 kes Apply patch (with some difficulties) from Joao Henrique Freitas
1102 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
1104 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
1105 ftruncate() actually works. In the case of some (cheap) NAS devices,
1106 it does not, and so recycling NAS Volumes does not work. The code
1107 simply unlink()s the file, then recreates it. This fixes bug #1011.
1109 kes First incomplete cut of big malloc blocks for htable.
1110 kes Tweak plugin code.
1112 kes Plugin debug code + tweak a couple bat dialog layouts
1114 kes Fix creating first JobMedia record during Migration to include
1115 proper index. This caused slow restores of migrated jobs.
1116 kes Temp fix to plugin name file_index.
1117 kes Bacula backed up and restored a MySQL database.
1119 kes Implement plugin restore.
1120 kes Implement parsing of db_driver to give db_type index.
1122 kes First cut of plugin restore code.
1123 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
1124 and do not strip paths on symbolic links.
1125 kes Set catalog backup database and user name from values specified on
1126 the ./configure line.
1127 ebl Fix #1031 about wrong pool source information in job report.
1129 kes Fix Win32 build.
1130 kes Remove a redundant jcr argument to find_files, match_files, and
1132 kes Implement '.status dir header|scheduled|running|terminated' that
1133 prints the requested status section. With the exception of the
1134 header, the other reports have fields separated by tabs (\t).
1136 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
1137 a resource embedded run command to find a since time if no explicit
1138 since time was supplied on the command line.
1139 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
1140 that updates the state file at job termination time in addition to
1141 when the daemon terminates.
1143 kes First version where a plugin did a backup.
1144 bpipe-fd.so created a backup file, wrote a test
1145 string to it, and Bacua could restore this fabricated file.
1147 kes Implement DB Driver = string for the DBI driver.
1148 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
1149 kes First cut of code for loading Win32 plugin dlls. Implement
1150 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
1151 and implement a dlfcn.h file based on opengroup's definitions of
1154 kes First cut plugin directives.
1156 kes Apply patch from bug #1049 to prevent stripping the path on a
1158 kes Attempt to fix bug #1047 where stripping a path corrupts the
1159 heap. Waiting for feedback.
1160 kes Correct the Mount message not to suggest labeling a new tape
1161 when doing a restore. Submitted by email by John Stoffel.
1162 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
1163 FD by using casting. Reported in bug #1042.
1165 kes A bit of crypto cleanup. More later.
1167 Release Version 2.2.8
1169 kes Apply patch from Martin to correct bug #1040, bscan sets existing
1171 kes Fixed important spelling error in doc -- bug #1045.
1173 ebl Fix bextract to be able to extract non-portable Win32 data to
1175 kes Move initialization of read/write res lock earlier in the code.
1176 This fixes the crash with a null conf file. This fixes bug
1178 kes Redefine CURES in lib/parse_conf to be URES and move it all
1179 into lib/parse_conf.c -- this responds to bug #1042, but does
1180 not fix it. The fix is not to compile with FORTIFY_SOURCE.
1181 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
1182 the trunk SVN. I don't think this was reported as a bug.
1184 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
1186 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
1188 kes Add DataDespooling and DataCommitting status (committing is
1189 the last despooling).
1190 kes Finish implementation of new reservations code noted below.
1192 kes Fix bsnprintf for float point numbers. I broke recently when
1193 parameterizing some variables. This fixes bug #1036.
1194 kes Undo recent reservations changes ... will apply them later
1195 when they work better.
1197 ebl Fixes #1034 which cause mysql to hang the connection after 8h
1198 ebl Change default statistics target of filename.name and path.path
1199 fields for PostgreSQL. This speeds lookup by indexes. Thanks
1201 kes A few more tweaks to new reservation code. Make sure to clear
1202 vol released flag when retaking volume. When reading label and
1203 label is bad mark volume unused. When recycling, mark volume
1204 unused so it can be renamed.
1206 kes Fix reserve_volume() so it doesn't release a volume in use
1207 (i.e. a volume entry not marked released). This should be
1208 the last part needed to fix bug #1018.
1210 kes Move Heartbeat documentation from Job to Director resource.
1211 This fixes bug #1033.
1213 kes Fix existing switch drive SD code to call autochanger to release
1214 any old volume. This must be done to keep the autochanger from
1215 releasing subsequently newly reserved volumes in doing a close().
1216 This should fix bug #1018.
1217 kes Fail if attempting to get console input in batch mode. This
1218 should help fail RunScript console commands that are incomplete.
1219 kes First cut implementing switch_drive() in SD (not actually called).
1221 kes Implement first cut running console commands in a RunScript.
1223 ebl Fixes bug #1028 where 'Selection Type' option was not usable
1225 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
1228 Release Version 2.2.7
1230 kes Add new free_tls() entry point so that Win32 builds.
1231 kes Fix compile warning in src/lib/util.c
1232 kes Fix entry point for edit_job_codes() so that Win32 builds.
1233 kes Fix seg fault Frank Sweetser reports in regression testing
1234 on his systems. The problem was that the original author of
1235 bsnprintf.c did not take into account the side effects of
1236 using ++x in the argument to a #define.
1237 kes Make SD protocol backward compatible with version 2.2.x.
1239 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
1240 because Bacula no longer restores sockets.
1241 ebl Always use ignorecase fileset option on win32 FD.
1243 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
1244 that implements double quoting include names in conf files,
1245 and also allows piping input by having the first character
1246 be a vertical bar (|).
1247 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
1248 that implement %f in RunScripts to pass the FileSet name.
1249 kes Skip leading | when lex input comes from a pipe as suggested
1250 by Michael Stapelberg <michael@stapelberg.de>.
1252 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
1253 Nerijus Baliunas <nerijus@users.sourceforge.net>
1255 kes Implement Plugin Directory and plugin events.
1257 kes Implement a security enhancement: TLS authentication but no
1258 encryption. Enabled by setting 'TLS Authentication = yes'.
1259 Note when this is on, TLS encryption is turned OFF!
1261 kes This patch corrects a problem where the maximum concurrent storage
1262 jobs counter gets out of sync during restore jobs causing jobs to
1263 'wait on max Storage jobs'. This patch fixes bug #1009.
1265 kes This patch fixes bcopy so that it produces correct Volumes.
1267 kes This patch eliminates spurious output to the console during a VerifyVolume
1268 job that contains encrypted data. It fixes bug #1024.
1270 kes This patch prevents the 'status dir' command from trying to use a scratch
1271 volume and possibly moving it from one pool to another. This patch fixes
1274 kes Add new include to postgresql.c suggested by Marc Cousins so
1275 that it compiles correctly with pgre version 8.3.
1277 kes Fix --archivedir addition to configure. Replace it with
1278 --with-archivedir in configure.in This fixes the regression
1280 kes This patch fixes bug #1012 where the job is canceled because
1281 of Max Run Time exceeded when the job has not yet started.
1283 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
1284 one 'part' to write. Instead of each part being stored on disk,
1285 written to DVD, then deleted from disk, all parts are written to disk,
1286 and only the last is written and deleted from disk.
1287 kes This patch fixes the status command to include the formating string for
1288 JS_AttrInsterting. It fixes bug #1021.
1289 kes This patch should fix the Mac OS X build problem on the latest
1290 Darwin, where sys/types.h was not included correctly (apparently
1291 due to a change in the Mac headers). The solution was to explicitly
1292 ensure that it is defined for the ./configure.
1293 This patch also has a rebuild of configure that includes the Debian
1294 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
1295 kes This patch should ensure that queued messages to the console are
1296 displayed as soon as possible. It should fix bug 1007, but has been
1297 reported not to work.
1299 kes This patch fixes the infinite loop when trying to increase the
1300 maximum number of volumes in a Pool during the add command.
1301 This patch fixes bug #1008.
1303 Release Version 2.2.6
1305 db Remove extra data on estimate command in joblist for bat.
1307 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
1308 really change anything, but is the beginning of doing it *right*.
1309 To do it completely right the LastWritten date must be passed to
1310 the SD, but it is not yet done.
1311 kes Minor tweaks to some bat restore SQL.
1312 kes This patch fixes bug #1003 where putting the message output from
1313 a Verify job into the catalog results in a recursive loop. The problem
1314 seems to show up only with postgresql (to be verified).
1315 kes Correct %x to %p in postgresql debug statement.
1317 kes Fix bug #942 where lots of emails where generated when the heartbeat
1318 interval was low and Bacula wanted a different tape from the one in
1321 ebl Add new SD despooling attributes and Dir inserting attributes
1322 job status codes in the catalog (Status table).
1324 ebl Use qmake-qt4 instead of qmake when available (debian system).
1326 kes Add a security warning to src/cats/make_catalog_backup.in indicating
1327 that passing the password via the command line (arg 3) is insecure.
1328 This responds to bug #990 (it doesn't fix it).
1330 kes Set default debug_level to zero. This corrects bugs #991 and #993.
1331 kes Fix a crash in bat when it cannot connect to the Director for example
1332 if the Director is not running.
1333 kes Remove redundant INDEX (JobId) from File table in the trunk.
1334 This fixes bug #992.
1335 kes Make explicit exception to GPL in LICENSE to permit linking
1336 the Win32 FD with Microsoft VSS code.
1337 kes Apply the Solaris package patch from
1338 Masopust, Christian <christian.masopust@siemens.com>
1339 kes Apply the patch to optionally add a timestamp in the debug output
1340 submitted by Mariusz Czulada <manieq@wp.eu>.
1342 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
1343 backend (sql_strerror). Fixes bug #989
1345 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
1346 It applied with no problems.
1347 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
1348 awk are on the path.
1349 kes Redirect stderror to stdin on mt status command in mtx-changer.in
1350 since the status is returned on stderr on Solaris.
1351 kes Activate Close button on tray-monitor window. This fixes
1353 kes Check for NULL item in parse_conf.c before calling it. In the
1354 case of Device, there is no item and this caused a seg fault when
1355 Device appears in the conf file.
1356 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
1357 avoids pulling in config.h multiple times in some new code.
1359 kes Fix spurious warning message printed when creating a volume with
1360 a LabelFormat. This fixes bug #976.
1362 Release Version 2.2.5
1364 kes Add JobId in place of Job name in all the Jmsg() output.
1365 kes Correct the APP_DESC for the Win32 storage service (remove an e).
1367 kes Make maxvol-test and new more strict maxvol2-test work.
1368 kes Print JobId in all Jmsg() job output.
1370 kes Add new SD despooling attributes and Dir inserting attributes
1371 job status codes. This fixes bug 961.
1372 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
1374 kes Fix doc issue. This fixes bug #963.
1375 kes Fix listing performance problems in bat. Pointed out by
1377 kes Remove old debug code.
1378 kes Fix bat code that tests for Win32. This should fix bug #968
1379 kes Query 5 list wrong Vol after migration. This fixes bug #960
1381 ebl Fix #969 where user can't change Replace option in restore menu.
1383 kes Save jcr in thread specific data (tsd) for each thread.
1384 kes Make Dmsg() print JobId as -%u.
1385 kes Make Jmsg, Emsg, and others automatically pickup the jobid
1386 for the thread if it exists.
1387 kes Remove old reservation debug jid code.
1388 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
1389 ebl Add an option that permit to specify spool size in job
1390 definition. (Applying patches/testing/spoolsize_per_job.patch).
1391 You must upgrade SD and DIR at the same time.
1392 dvl Add new configuration item --archivedir
1393 dvl Adjust regression tests to use tmp not /tmp. This will allow
1394 multiple concurrent runs of the regression tests.
1396 kes Fix race condition that drops final block written to volume.
1397 This happens in rare cases with multiple simultaneous jobs
1398 when the Volume fills. This fixes bug #964. May be related
1399 to bug #935 and possibly #903.
1400 kes Eliminate more strerror() and replace with bstrerror().
1401 kes Remove BSD getopt and replace with unrestricted IBM version.
1402 kes Fix Win32 build for changed calling sequences.
1403 kes More tweaks to the mount volume routines to get everything
1404 right. Changed variable name from find to have_vol, which is
1405 much easier to understand.
1406 kes Enhance btimer debug code.
1408 kes Fix FD->SD authorization failure, which was due to spurious
1409 wakeups from a pthread_cond_timedwait(). Simply check the
1410 predicate before continuing. This fixes bug #953.
1411 kes Add const char where needed (more to do). Remove temp debug code.
1413 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
1414 kes Don't overwrite error message in check_tables_version.
1416 kes Unlock batch insert tables with same calls used elsewhere.
1417 kes Allow starting 59 jobs a second.
1418 kes Make SD session key more random.
1419 kes Add retry for SQLite opening db if it fails. Probably helps
1421 kes Suppress extra error messages during batch insert failure.
1423 kes Add jcr to timer packets so if killed message can be sent to job.
1424 kes Add JobId to all Dmsg() output.
1425 kes Put some FD auth code on dbglvl rather than fixed.
1426 kes Return insert attributes error message in db msg buffer to avoid
1427 false error messages. Helps fix bug #966.
1428 kes Separate batch init error messages. Probably helps fix bug #966.
1429 kes Make SD code that contructs attribute insert check string lengths
1431 kes If Dir gets an error during inserting attributes, cancel SD.
1432 This reduces unnecessary error messages.
1434 kes Correct search boolean for getting Volume info
1435 ebl Cleanup batch insert code. Probably fixes bug #965.
1436 kes Back out one small change to the reservation system (reserving a volume).
1437 kes Rework how a Volume is mounted. It is now much more intelligent and
1438 will always attempt to use any mounted volume if possible and reduces
1439 calls to the Director asking about volumes.
1441 kes Turn off some code when batch insert not enabled.
1442 kes Edit FD name in connect error messages.
1443 kes Rework the reservation system to take into account that the Director
1444 might give us a Volume that is different from the current one being
1445 used, and to ensure that we don't exceed Maximum Volume Jobs.
1446 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
1447 fatal error with multiple jobs running'
1448 kes Add more debug code in reservation system.
1449 kes Implement maxvol-test to check bug #947.
1451 kes Add code to handle tray monitor separated from Win32 FD.
1452 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
1454 kes Add missed return in fixing verify bug -- trunk only.
1455 ebl Fix a command parser issue causing a director segfault.
1456 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
1457 This fixes bug #954.
1458 kes Increase the max block size to 4MB fixes bug #957.
1459 kes ERABT if user sets min block size > max block size. Fixes bug #956.
1460 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
1461 is not properly mounted (recognized) during a poll.
1462 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
1463 Job that has differences reports Verify OK.
1464 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
1466 ebl Add an option to operate on all pools with update vol parameters.
1467 This complete the project 20. Patch from Nigel Stepp.
1468 ebl Add history support to bconsole when using readline.
1469 Using Ctrl-D to exit doesn't update .bconsole_history
1470 kes Modify new volume algorithm to use max MediaId for generating next
1471 volume number rather than the count of Volumes. This should essentially
1472 eliminate the failure rate if some volumes were deleted. Bug #921.
1473 kes Begin implemention of Optimize Job Scheduling.
1474 kes Implement restore callback that Dirk and I agreed on for bat
1475 restore. This fixes bug #928. Restore of backup of zero files fails.
1476 kes Fix SQL Catalog logging which broke with new db_escape_string
1479 Release Version 2.2.4
1481 kes Fix bacula_cats.def for new db_escape_string().
1482 kes Increase size of name string when FD making connection to SD.
1483 May fix bug #953. FD->SD connection failure.
1485 kes Add code to help Dan debug 2drive-incremental-2disk test.
1486 kes Add code to try to fix bug #908.
1487 kes Add waits to multiple exit detection code to try to force pid
1488 file to always be deleted.
1489 kes Restore good dev.tar.gz to rescue set appropriate binary property.
1490 This fixes bug #950.
1491 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
1492 trying to switch drives by checking for blocking before unblocking.
1494 kes Cancel storage daemon in all cases where FD reports error. This
1495 should fix virtually all cases of bug #920.
1496 kes Fix db_escape_string() for MySQL which did not compile.
1498 kes Fix error message that was clobbered when Dir tells SD it does not
1499 have write permission on Volume. This should fix a minor point
1500 in bug #942, but not the main problem.
1501 kes Add code to cancel job in SD if FD connection fails. This should
1503 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
1504 dvl Pass jcr and db into db_escape_string() to enable better escaping
1506 kes Fix migration code to get correct Volume name with multiple volumes
1507 by skipping |. Fixes bug #936.
1508 kes Implement patch supplied by Landon to fix bug #944 where using
1509 TLS with bconsole uses 99+% of the CPU.
1510 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
1512 kes Move patches into patches directory.
1514 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
1517 ebl Using 'm' in bconsole will show messages like before,
1518 and not memory usage.
1519 kes Fix bug #935, and probably also bug #903 where files were not
1520 restored. MediaId was not properly set in JobMedia record after
1523 kes Suppress chown and chmod error messages if the FD is not running
1526 kes Apply Martin Simmons' patch that should turn off the new API usage
1527 when batch insert is turned off allowing building on older
1529 kes Add ./configure search in qwt-qt4 for qwt package
1531 kes Bacula is now free of 3rd party GPL copyrighted code!
1532 kes Remove idcache.c
1533 kes Add guid_to_name.c/h which replace idcache.
1534 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
1536 ebl Detect if new PosgreSQL batch insert API is present.
1537 kes Correct incorrect mempool call causing Director crash. Occurs on
1538 systems without va_copy().
1539 sb Update spec files for 2.2.1 release
1541 kes Fix memory pool call in ua_output.c. bug #934.
1542 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
1543 Add test program to fnmatch.c
1545 kes Integrate patch to README.vc8 from
1546 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
1547 edit it to get it into Unix patch format.
1548 kes Implement mkpath.c to replace old FSF makepath.c
1550 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
1552 Release Version 2.2.1
1554 kes Update POTFILES.in
1555 kes Cleanup a few underquoted AC_DEFUNs in configure
1556 kes Apply patch from Martin Simmons that adds a test for va_copy to
1559 kes Fix bug #921 by increasing the number of tries to create a new volume
1561 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
1562 can be called multiple times. Implement a version for machines
1563 without va_copy() that gets a big buffer.
1565 kes Integrate more portable zone offset code into bsmtp.c
1566 Submitted by Attila Fülöp.
1568 kes Fix bad SD->FD return status reported by
1569 (James Harper) <james.harper@bendigoit.com.au>
1570 ebl Fix a bug in read_close_session which return random status
1571 thanks to James Harper
1573 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
1574 and directory names during restore of single file/directories.
1575 kes Add sanity checks to .sql command when string is empty. Hopefully
1576 that will resolve Dirks Director crash.
1578 kes Apply patch submitted by Martin Simmons that corrects a seg fault
1579 in the bsmtp chat subroutine when debug is >= 10.
1581 kes Fix Director crash when running bat SQL queries.
1582 kes Add David's notes on Item 8: Copy pools.
1584 kes Rework projects file to be current and ready for a vote.
1585 kes Enhance lex scanner error message.
1587 kes Tweak LICENSE file to mention BSD code.
1588 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
1589 if specified on the ./configure.
1590 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
1591 This class is intended to allow us to open a second bsock to the
1592 Director while in the restore subdialog.
1594 kes Fix configure to create bat Makefile before creating dependencies.
1595 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
1596 kes Add a tooltip to the tray monitor.
1597 dvl Set the Director's PID file before dropping privs. This fixes
1600 kes Update AUTHORs file
1601 kes Increase the default max concurrent jobs to 20 in FD and SD to
1602 correspond with the default .conf files.
1603 kes Rewrite the Win32 service routines. This eliminates the 3 copies
1604 some different, of the same file created by RN when porting the
1606 kes Rearrange some of the Win32 directories and the placement of the files
1608 kes Set DEVELOPER flag in version.h
1610 ========================================================================
1611 Release Version 2.2.0
1613 kes Apply a second doc patch from Marc.
1614 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
1615 improves the tips section that discusses how to setup multiple
1618 kes Update bat README file.
1619 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
1620 corrects a typo in the Recycle status check in db_find_next_volume().
1621 This will probably fix a number of annoying problems with multiple
1623 kes Modify most of dird/msgchan.c to use bsock class calls rather than
1624 bnet calls -- no functionality change.
1626 kes Modify the Verify output to specify if files are missing on
1627 the Volume(s) or disk. Fixes confusion in bug #916.
1628 kes When more than one Volume is read in a migration job, the last
1629 Volume bytes reported are from the last read volume rather than
1630 the last written volume. Fixed. This fixes bug #910.
1631 kes Fix display of Recycle flag after update volume=foo recycle=yes.
1632 It previously printed New Recyle flag is: no. This fixes bug
1635 kes Correct seg fault when switching tape drives during restore.
1636 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
1637 be used until after 2.2.0 release.
1639 kes Remove fnmatch() in SD that permitted wild card specifications.
1640 This fixes bug #914.
1642 kes Fix %g in filename returned by SQL for browse tree reported by
1644 kes Fix configure so that it puts config.out in the cwd rather than
1646 kes Attempt to fix the locking problem reported by Eric in bug #906.
1647 kes Make berrno class to leave errno unchanged after constructor call.
1648 kes Make bnet_server use the heap rather than the stack to allocate
1649 its socket fd pointers to avoid a crash at termination. Problem
1650 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
1652 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
1653 and putting it in depkgs-qt along with Qt4.3.
1655 kes Rework code in acquire.c that switches drives for reading when
1656 the Media Type does not match. This should fix bug #906
1658 ebl Fix a director segfault during job setup #907
1659 kes Correct seg fault in postgresql when first operation returns no
1660 rows. Fixes Dirks File browser problem seg fault with bat.
1662 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
1663 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
1666 kes Implement PopUp YES/NO dialog for bat.
1668 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
1670 kes Correct RunScript to terminate job in FD on failure.
1671 kes Change abort_on_error and AbortJobOnError to fail_on_error
1672 and FailJobOnError in RunScripts.
1673 kes Minor tweaks of code formating in RunScripts, principally to
1674 avoid depassing 80 columns.
1676 kes Eliminate one #ifdef Win32 in bsmtp
1677 kes Implement grow tool to grow a file for testing very large databases.
1678 kes Add big-vol-test to test Bacula seeking with > 5GB.
1681 kes Modify find_next_volume() to return all values in Media record.
1682 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1686 kes Update Release notes
1688 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1689 Warning, in previous beta version, all media get from scratch keep their
1692 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1693 This should fix bug #842. Made a note to look at removing the temp
1694 files at the end of the install.
1695 kes Add ability to mount and unmount a file device providing it is
1696 marked as being removable and has the appropriate mount and unmount
1697 commands defined in the Device resource. This fixes bug #830.
1698 kes When applying a storage override, release all previous storage
1699 definitions rather than just prepending the new storage.
1700 This should prevent a good deal of confusion.
1702 kes Implement ./configure search for qwt libraries.
1704 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1705 Win32 FD. This should fix bug #893.
1706 kes Remove an unnecessary beep in Win32 init code.
1707 kes Update copyright dates in Win32 executable about boxes.
1708 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1709 code with a BSD getopt.c and getopt.h.
1710 kes Remove sched.h from the Win32 compat directory -- not used.
1711 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1712 need to shut it down, do it through the services panel or the command
1714 kes Remove some inappropriate Bacula FSFE copyrights.
1715 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1716 kes Fix regress config non-portable test as pointed out by
1717 Florian Heigl <florian.heigl@gmail.com>
1718 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1719 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1721 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1722 Reported by Frank Sweetser.
1726 kes Fix client-only build.
1727 kes Integrate client-only fixes for bsys (initgroups) and conio from
1728 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1729 kes Make arguments to get_scratch_volume() in same order as other
1731 kes Rework the prune_volumes() subroutine so that after purging and
1732 no volume found in desired pool, it will check for a scratch
1733 volume. This prevents recycling the whole scratch pool.
1734 kes Add code to status storage to print boffset_t (largefile support).
1736 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1737 kes You now need a --with-qwt=<dir> to be able to build bat.
1738 kes Update src/win32/cats/bacula_cats.def to include the new
1739 db_get_query_dbids() call on Win32.
1741 kes Correct a problem when selecting a scratch volume and moving
1742 it to another pool that lost some columns.
1743 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1744 kes Enhance Autochanger error messages to include Volume and device name.
1745 kes Rework prune_volumes() code to take account of InChanger flag,
1746 and to handle recycling volumes going to the Scratch pool and
1747 current pool because the RecyclePool directive.
1748 kes Implement a better and more efficient db_get_query_dbids() to
1749 handle creating and passing back a list of DBIds.
1753 kes Start work on new more efficient DBId subroutine. First use
1754 will be for recycling volume to Scratch inchanger.
1755 kes Increase number of JobIds in pruning from 1000 to 10000.
1756 This to be replaced by above routine.
1757 kes Begin implementation of building Qt4 on Win32.
1758 kes Correct typo in fix I added for bad TLS shutdown.
1759 kes Pull 2.0.3 patches into patches directory.
1760 kes Update Release notes. Include qt-console in line count.
1761 kes Update Projects file.
1763 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1764 bug in migration code where a job that spanned two volumes
1767 kes Implement new BST_DESPOOLING blocked state. Change from locking
1768 during despooling in SD to blocking. This means that other threads
1769 can work with the device structure, in particular the reservations
1770 system while despooling.
1772 kes Fix return in reservation message queue that missed clearing
1773 the jcr lock (implemented 26Jun07 below).
1774 kes Rename a number of dev methods to make locking function names
1776 kes Document locking in lock.c. Move lock structures to new file
1779 kes Move reservations message lock to lock jcr only this
1781 kes Move main SD locking code into lock.c (new file).
1782 kes Update Win32 build to include lock.c
1786 kes Dirk committed the qwt library code for drawing graphs in bat.
1787 kes Tweak install of qwt so that it is integrated with ./configure.
1789 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1790 out by Eric (my typo).
1791 ebl Fix configure.in to get batch mode enable
1792 kes Return correct string from authenticate.cpp in bat when connecting
1794 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1795 spurious line drops when using TLS.
1796 kes Do not file reparse points when restoring a file that already
1799 kes Implement Windows reparse points -- similar to directories, but
1800 we do not descend into it. This is a first cut. They seem to
1801 be backed up, but restore is not yet tested.
1802 kes Remove restore_blocking in tls code when shutting a socket to leave
1803 it in blocking mode. Hopefully this will fix the encryption bug
1804 reported by Frank Sweetser.
1805 kes When opening a file for backup, tell the OS that we are going to
1806 read it sequentially -- optimization.
1807 kes Change variable names in authenticate_director() to not conflict
1808 with member names in bat. Caused great confusion with compiler,
1811 kes Queue openssl error messages in case of comm problem.
1812 kes Do shutdown() call if socket terminated.
1813 kes Remove some duplicated code in tls.c
1814 kes Move more of the bsock member variables into private and access
1816 kes Add Frank Sweetser's tls-test to the regression suite.
1818 kes Add Swedish sv.po file
1820 kes Don't print clock skew message in FD if less than 3 seconds diff.
1821 kes Add a bit of VSS info to status client.
1822 kes Implement a first cut of Vista VSS, using Win2003 code.
1824 Release: 2.1.20 beta
1826 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1827 loaded tape but uses first drive).
1828 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1829 This was indeed a Win32 issue.
1831 kes Simplify search of autochanger for in-use Volume.
1832 kes Fix exit condition of check for in-use volume. kes Remove
1833 inappropriate my_postgresql_free_result() in db_close()
1835 kes Fix bad return in FD when encryption signature not found.
1836 Probably caused a crash.
1837 kes Inhibit missing encryption signature error messages for
1838 file types where no signature computed.
1839 kes Correct inverted check on autochanger in reservation system.
1840 kes Tweak debug code in autochanger reservation.
1842 kes Add some additional locking in the cats directory in subroutines
1843 that modify packet variables called from batch insert.
1844 kes Rework how dcrs are allocated. new_dcr() can now be called
1845 with an existing pointer, and it will simply clean it up.
1846 This allows the reservation system to test various different
1847 devices, and will permit easy device changes.
1848 kes A bunch of changes all over to handle new new_dcr() calling
1850 kes Work more on the Volume management in the SD. Remember Volumes
1851 for tape drives and for autochangers (even virtual disk changers).
1852 kes When looking at the Volume list to reserve a drive, handle
1853 autochanger names correctly by interating through the changer
1854 devices. Also call the Director to see if a Volume is suitable
1855 for the current job.
1856 kes Fix some bugs in bscan. Make sure all media records are written.
1857 Make sure that valid JobMedia records are written for disk files.
1858 Previously they were completely wrong.
1859 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1860 that the URLs don't change and so that the developers will all
1861 work off the same copy. Rebuild from scrach.
1862 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1864 Release: 2.1.18 beta
1866 kes Fix seg fault in FD from incorrect digest size.
1867 kes Fix argument to non-OpenSSL crypto.c subroutine.
1869 Release: 2.1.16 beta
1871 kes Remove a few malloc()s from the encryption code.
1872 kes Use the class calls to bsock in filed/backup.c and restore.c in
1873 place of the old bnet_xxx code.
1874 kes Implement code that does an on the fly calculation of the
1875 signing digest during restore of encrypted files. It makes
1876 a best guess at the algorithm, and if it is not correct, will
1877 then revert to the old code which reads the file after it is
1879 kes Implement at least one missing crypto stream in stream_to_ascii()
1880 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1881 #877 where a reload with bad syntax causes Dir to exit.
1883 Cut: 2.1.14 beta (not released)
1885 kes Do not free a volume on a tape drive until another volume is
1886 mounted and read, or the autochanger unloads the volume.
1887 This should help the SD re-use volumes that are already mounted,
1888 and should fix bug #886.
1889 kes Apply patch from user brettedgar that allows gnome2-console include
1890 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1891 kes Apply patch from Lucien Weller that fixes day of week calculation
1892 because of DST flag problem. Fixes bug #887.
1894 kes Move find_next_appendable_volume() to after acquiring a valid device
1895 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1897 kes Unable to reproduce bug 872. However added additional testing for
1899 kes Bug #874 resolved by documenting SQLite limitations.
1900 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1901 kes Bug #881 resolved by removing typo in mtx-changer script.
1902 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1903 approval. Added a link to the wiki on the web page, and implemented
1904 a backup from http://paramount.ind.wpi.edu
1906 kes Fix update allfrompool to pass pool name.
1908 kes Convert to pure GPL v2 license.
1909 kes Fix sscanf problems reported by Peter Buschman that caused
1910 a bus error on Solaris.
1911 kes Rework (simplify) the select prompt in bat.
1912 kes Move get_jobid_from_tid() into lib and create a
1914 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1915 should definitely fix the problem of lost error messages in the
1917 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1918 kes Eliminate tcpd.h from the project. Enclose the #include from the
1919 library with extern C ...
1920 kes Add print of signal name when a signal is trapped.
1922 Release: 2.1.12 beta
1924 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1926 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1927 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1928 makes SQLit3 run 30 times faster, though a bit less safe.
1929 kes Implement --with-batch-insert in configure and detection of thread
1930 safe libraries. It is on by default, but turned off if no thread
1931 safe library (e.g. SQLite 2) is available.
1933 kes Fix Bacula PostgreSQL buffer overruns.
1934 kes Do better checking for NULL results returned from PostgreSQL;
1935 implement retry for failed queries; clear results buffer after
1936 failed query. Hopefully this will correct the PostgreSQL failures.
1938 kes Implement algorithm to handle only one appendable volume with
1939 Prefer Mounted Volumes = no.
1940 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1941 returned from a query.
1942 kes Make volume lock recursive.
1943 kes Implement an additional volume reservation algorithm that
1944 starts by considering all reserved volumes then uses the
1945 old brute force algorithm of searching the resources to
1946 find a suitable device.
1947 kes Add new reservations debug code and refine the old code.
1948 kes Update the win32/dll/bacula.defs file.
1950 kes Tweak reservations algorithm to permit a few more cases, i.e.
1951 volume reserved, but on different drive, ...
1952 kes Enhance SD status to include Pool and Media Type for drive in a
1953 more readable format (a bit longer).
1954 kes Fix PostgreSQL double free.
1956 kes Minor refactoring of restore decryption code.
1957 kes Add code to smartall.c to detect double free of a buffer.
1959 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1960 so that bsmtp will create a correct email address (mailbox only).
1961 kes Modify 'memory' command so that the buffers are listed as 'In use'
1962 to avoid confusion with Orphaned buffers.
1963 kes I reworked the OpenSSL include/lib flags to be handled in
1964 the standard Bacula way, which should fix bug #863 concerning
1965 non-standard OpenSSL libraries.
1967 kes Implement Help Browser window for bat.
1968 kes Fix reload bug that reset StorageId to zero.
1970 kes Fix TLS #ifdefing when TLS turned off.
1971 kes Ensure that when labelling a tape with Slot=0 that InChanger
1973 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1975 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1976 add DISTINCT (required by PostgreSQL).
1977 kes Implement BSOCK authenticate_director() method. Eventually will
1978 authenicate all daemons.
1979 kes Move several more functions into the BSOCK class.
1981 kes Add code to tell the OS that we no longer need a cached
1982 file that we were reading. In findlib/bfile.c. Also,
1983 only cache files that we are reading. Thanks to
1984 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1985 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1986 kes Implement script to automatically generate cats and dll .def
1987 files for Win32 dll.
1988 kes Update README.mingw32 to include new .def file generation.
1989 kes Correct typo in UTF-8 error message as reported by:
1990 jhernandez <julianhernandez@gmail.com>
1991 kes Add additional sm_check() code on debug level 1.
1992 kes Set default debug level to 1.
1993 kes Trap SIGABRT in attempt to get traceback.
1995 kes Reduce bat connect timeout from 30 to 15 seconds.
1996 kes More restructuring and implementing BSOCK class in place of
1998 kes Remove a few unnecessary malloc() tests in crypto code.
1999 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
2000 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
2001 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
2003 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
2005 kes Fix Verify InitCatalog. The attributes were not pointing to the
2006 correct saved location.
2007 kes Implement message callback so that GUI is sure to get all
2008 daemon messages. Currently displayed in a dialog in bat.
2009 kes Ignore SIGUSR2 (Bacula timer) in bat.
2010 kes Apply regress patch from bug #859 to allow regress to work
2011 with Solaris compiler.
2013 kes Begin adding TLS support to bat.
2014 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
2015 clean up lex.c and make it more readable.
2017 kes Move more bnet functions into the BSOCK class.
2018 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
2019 kes Complete change of berrno strerror() method to bstrerror()
2021 Release: 2.1.10 beta
2023 kes Cleanup incorrect email addresses in bsmtp.
2024 kes Make bat display initial messages rather than discard them.
2026 kes First cut of adding .mod to the run command.
2027 kes Implement auto display of messages in bat.
2028 kes Enhanced preferences to allow all Bacula output to be
2031 kes Try to make bsmtp date routines more generic.
2032 kes Fixed bug #856 autochanger documentation.
2033 kes Rework bsmtp date editing for Win32. This fixes bug #854.
2034 kes Add new cats entry point so Win32 builds.
2036 kes Attempt to fix bsmtp date editing on OSes without %z editing.
2038 kes Do better checking for the MySQL 64 bit libraries looking for both
2039 .a and .so libraries.
2040 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
2041 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
2042 kes Require the thread safe version of MySQL during configure. Thanks
2043 to Andre Noll for pointing this out.
2044 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
2045 continuing in migration code.
2046 kes Apply implementation of tray-monitor font derived from gnome-console
2047 submitted by Andreas Piesk <a.piesk@gmx.net>
2049 kes Eliminate important memory loss in SQLite
2050 kes Fixed the batch insert MySQL thread specific data that was not
2051 being freed. See cats/mysql.c:db_thread_cleanup().
2052 kes Fix restore before command.
2053 kes Convert old hdr.name to name() in a few places.
2054 kes Implement update jobid command.
2055 kes Return all time_t dates in db_get_job_record()
2056 kes Stop watchdog in SD earlier.
2057 kes Put Pool just after Storage in please mount message.
2058 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
2061 kes Update the po files.
2062 kes Fix Verify InitCatalog by making it cache attributes.
2064 kes Change name bacula-bat to bat for man 1 page to correspond to
2066 kes Check for client and store NULL pointers in status command. This
2068 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
2069 kes Fix sign extended editing of %p.
2070 kes Clean out a little old #ifdefing in cats/mysql.c
2072 kes If time diff between DIR and FD is more than 600 seconds convert
2073 INFO message to WARNING.
2074 kes Implement heap size display in status for all daemons.
2075 kes Attempt to fix MySQL db open memory loss (not successfull).
2076 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
2077 kes Eliminate memory loss in MySQL (possibly other SQLs) during
2078 Query. This looks like a MySQL but but by doing extra releases,
2079 the memory goes away. This should fix bug #847.
2081 kes When backup fails, cancel SD before waiting for sd termination.
2082 kes If SD is waiting for FD to connect during cancel, wake up the
2084 kes Fix fsf code so that errno is correctly reported.
2085 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
2087 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
2088 so that Bacula doesn't later stumble into a seg fault.
2089 kes Use the term Restore Client in the restore Job report.
2090 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
2091 the original job's FileSetId.
2092 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
2093 spooling in migration jobs. Not yet tested.
2094 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
2095 reading conf file from a pipe. However, do it with open_bpipe()
2096 rather than popen. Not yet tested.
2098 kes Fix an ugly bug where the VolCatBytes were getting updated
2100 kes Implement bconsole memory command that prints current memory
2101 usage, plus smartalloc dump.
2102 kes Clarify some error messages in backup, admin, and migrate.
2103 kes Shrink label dialog to smaller size.
2104 kes Invert Cancel OK buttons on restore to be OK Cancel.
2105 kes More strerror() to bstrerror() conversions.
2107 kes Start implementing bstrerror() in place of strerror().
2108 kes Stripping path -- seems to work.
2110 kes Prevent door and port files from being restored (mostly
2112 kes Free an unreleased buffer in compat code.
2113 kes Change console Job name from *Console* to -Console- to eliminate
2114 Win32 filename problems. Put Win32 path separator when creating
2115 Console file. This fixes bug #846.
2116 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
2118 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
2120 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
2121 to force Win32 error message.
2123 kes First cut strip path. The data should be passed to the FD,
2124 but nothing is done with it yet.
2125 kes Enhance the digest and signature routines in the crypto
2126 library to accept a JCR and to use it to print error messages
2127 so that they will go in the Job report rather than the daemon's
2129 kes Simplify some of the verify signature code.
2130 kes Simplify a few of the alternative returns in the signature
2133 ebl Use only POSIX regex instead of GNU regex in breg.c for
2134 File relocation. It fix broken freebsd compilation.
2135 kes Convert all other Dir files to use new ua class message
2137 kes Tentative fix for missing digest signature in bug 807.
2138 kes Correct handle problem in new win32_ftruncate routine.
2139 kes Convert ua_purge.c and ua_update.c to use new ua class
2140 message routines for bat.
2142 kes Correct incorrect installation of LICENSE in Win32 installer.
2143 kes Display LICENSE at the beginning of the Win32 install.
2144 kes Attempt to correct the need for the png files to be installed
2146 kes Reapply my bat.conf install script in qt-console. I think I
2147 editted bat.pro instead of bat.pro.in and it was lost.
2148 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
2149 the /var/lock/subsys for subsysdir. Also corrects typos in the
2152 kes First cut update job.
2153 kes Correct configure to include qmake of src/qt-console directory.
2155 kes Make restore job yes/mod/no print in one command so GUI works.
2156 kes First cut implementing backup and restore client.
2157 kes Correct editing in Verify output that caused a seg fault.
2159 kes Insure that bat.conf is not overwritten during installation.
2160 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
2161 while I was implementing migration in March 2006 !
2163 ebl Cleanup file relocation, using char *RegexWhere instead of
2164 char *where + bool where_use_regexp
2165 kes Update some manpages and add bat manpage.
2166 kes Make a first cut at converting bacula.spec.in for bwx-console
2168 kes Apply patch from John Goerzen to add hostname as fourth argument
2169 to make_catalog_backup script.
2170 kes Fix typos I introduced into bsmtp.c
2171 kes Make pm_strxxx() routines handle input of NULL pointer. This
2172 is to protect from NULL pointers returned from SQL databases.
2173 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
2174 kes Add more debug to FIFO code -- fix fifo regression test.
2176 kes Implement posix_fadvise in FD, and for reading spool files in SD.
2177 kes Add thread timer to bnet_connect() to break from OS if wait time
2180 kes Update Win32 build to include new files, new symbols, and
2182 kes Implement socket level heartbeat (tcp_keepidle)
2183 ebl Commit File relocation patch
2184 kes Make bat have 'make install' target.
2185 kes Warn during install if old gnome-console binary found.
2186 kes Warn during install if old wx-console binary found.
2187 kes Add -8 option to bsmtp command line to add content type utf-8.
2188 Fixes bug #809. (Character coding problem in bsmtp).
2189 kes If < is found in target (from, to, cc) then do not enclose the
2190 target in < > in bsmtp. Fixes bug #772 (malformed address).
2191 kes When printing certain items in dbcheck, stop after 300000.
2192 Fixes bug #822. (dbcheck loops).
2193 kes Incorrect status in Dir after waiting for mount with poll set.
2196 kes Extend idea of Prefer Mounted Volumes to mean a volume about
2198 kes Print waiting to reserve a device every 5 mins.
2200 kes Don't call close_part in label.c if tape and relabel.
2201 kes Don't free volume if busy in close() -- should help with
2203 ebl Fix #824 RunScript bug (After script could be execute twice)
2204 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
2205 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
2206 Add a regression script to test RunScript
2208 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
2211 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
2212 deprecated. No additional bugs will be fixed, and they will be dropped
2213 in a future release (probably 2.4.0).
2214 kes Change name of wx-console to bwx-console to make it more Bacula
2216 kes Change the name of gnome-console to bgnome-console to make it
2219 kes Some time in March, a Feature Request with patch from Jorj Bauer
2220 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
2222 The ability for the director to validate a Client (FD) CN against
2223 an arbitrary set of patterns rather than the hostname, with
2224 A new 'TLS Allowed CN' set of directives which are implemented
2225 in the Client resource. Then pattern matching is used in place
2226 of hostname matching against the Certificate's CN. As an example, we
2227 have certificates which (a) use a local CA, and (b) have a CN of the
2229 kes Add new/changed entry points to Win32 build
2230 kes Create unaccepted-projects for projects that are not accepted.
2231 kes Simplify locking in the reservations system.
2232 kes Add more debug code in reservations.
2233 kes Make sure error condition on reserving a volume is handled correctly.
2234 kes Correct handling of volume_in_use.
2235 kes Correct handling of initializing a device.
2236 kes Move handling of broadcasting releasing a device into release_device().
2237 kes Correct attaching dcr to dev so that it is only done if device
2238 is properly initiated.
2240 kes Locking debug level tweaks in SD.
2241 kes Tweak new Volume code.
2243 kes Add exec external-command [wait-seconds] to bconsole. This
2244 executes the external-command. Note! normally external-command
2245 should be enclosed in double quotes.
2246 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
2247 it should normally be off in a production system.
2249 kes Implement die command for SD so that we can force it to dump.
2250 kes Implement SD lock debug code.
2251 kes Implement new algorithm for keeping Volume list in SD. It
2252 is now owned by the device.
2254 kes Implement new code for freeing in use volumes that should
2255 resolve if not all, some of the problems of multiple drive
2256 tape conflicts described in bug 801.
2258 kes Fix gui/bacula-web/images files in svn.
2259 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
2261 ebl Fix a bug in batch mode (in string escape)
2262 kes Correct migration prune SQL typo that crept in in a
2263 recent 2.1.x change.
2265 kes Move bnet_despool() into class in bsock.c
2266 kes Modify job report to include director name and Build OS.
2267 kes Move drop root privilege and check_catalog() before fork.
2268 kes Add update database scripts (version 9 to 10) to updatedb directory.
2270 ebl Check size and age of each file after its backup to see if
2271 it has changed during backup, if 'checkfilechanges' is set.
2272 The FD will do an extra check (stat(2)) after
2273 each file backup. mtime, ctime and size are compared with
2274 'before backup' information. If time or size mismatch, an
2275 error message will be generated. You must upgrade FD to use it.
2277 kes Make database name and user configurable
2278 --with-db-name=xxx --with-db-user=xxx
2279 kes Add back database type to message.c for debugging.
2281 kes Implement dir_sql() which issues an SQL query.
2282 kes Modify bat medialist to use dir_sql() and do some minor C++
2283 formatting as well as eliminating a number of pointers, simplifing
2286 kes Fix some of the mtx-changer grep commands for tape label readers.
2287 kes Convert a number of bsendmsg into the appropriate send/warning/error
2288 message class calls.
2289 kes Suppress the using database message in the .sql command.
2290 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
2292 kes Add context menu for floating a window.
2293 kes Some minor cleanup and name changes in qt-console
2294 kes Add doing mt setblk 0 in Win32 mtx-changer.
2295 kes Apply Martin's bug fix to move definition of ENODATA for
2297 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
2298 sqlite2 and sqlite3.
2300 kes More pruning cleanup.
2301 kes Turn on wait_for_drive by default in mtx-changer.
2302 kes Turn on Batch insert code by default as it now passes regression.
2303 kes Add ./configure --enable-bat to enable building of Bat.
2304 No install yet though.
2306 kes Implement a new .sql command for bat.
2307 kes Implement code to turn off pruning in obtaining the next volume.
2308 Pruning is turned off for the status dir command, but turned on
2309 for SD requests and for the list nextvolume command.
2311 kes Correct Qmsg() that was not updated correctly when committing a
2312 previous change (probably the recent TLS patch).
2314 kes Write new subroutine is_volume_purged() that explicitly checks
2315 if the Volume is purged, and if so marks it as such. This should
2316 resolve problems reported about needing to mount twice to recycle
2318 kes Rewrite pruning algorithm to do more work in the SQL engine, and
2319 to pass a list of JobIds to be deleted to SQL. Also, minimize the
2320 amount of duplicated code.
2321 kes Do volume pruning only for the Media Type desired (reduces pruning time
2322 if multiple Media Types are in the same pool).
2323 kes Implement more detailed info in the Job report for the Bacula version
2325 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
2327 ebl Add bbatch tool to bench database and insert mode.
2328 Fix sql quote stuff in batch mode
2329 Fix sql stuff for mysql
2331 kes Correct problems with am/pm scheduling. Fixes bug #808.
2332 kes Implement new prunning code that prunes up to 1000 jobs at
2333 the same time. The same technique can be applied to a number
2334 of other prune/purge subroutines.
2335 kes Add an insanity check when starting a new tape job to ensure
2336 that the tape position has not been changed. If so fail the
2338 kes Fix Win32 build for dlls to add the folllowing:
2339 src/lib/bsock.c -- new file with new entry points
2340 src/lib/dlist.c -- new entry points
2341 src/cats/sql_create.c -- new entry point
2342 src/cats/sql_cmds.c -- new DATA item exported
2344 ebl batch mode cleanup bscan-test is ok now.
2345 kes Implement SD code to check length of disk volume before appending.
2347 kes Correct return status on db_batch... routines.
2348 kes Add call to db_write_batch_file_records() to migration code.
2349 ebl Fix AfterJob timing
2350 kes Move the checking of the database in initializion of the Director
2351 to after we drop privileges. This avoids the need for both root
2352 and bacula access to the DB.
2353 kes Correct a misplaced variable definition in src/filed/backup.c
2354 kes Correct how the new batch insert db_create_attributes_record()
2355 uses the arguments. Caused a seg fault in bscan.
2356 kes Implement lock() and unlock() methods in DEVICE class.
2357 Implement block() and set_block(xx) methods in DEVICE class.
2358 kes Modify bnet_connect() so that it uses time() to check for the
2359 wait time expiring (on some OSes, some system calls may not
2360 return immediately).
2361 kes Modify Verify to obtain the previous JobId when it is actually
2362 running rather than at schedule time (as it was in 1.38.x).
2363 kes Fix src/job.c to handle MaxWaitTime correctly. This should
2365 kes When checking pid in pid file, continue running if the pid is
2366 the same as ours. This occurs on IRIX after a system crash.
2369 kes Extend new GUI API.
2370 kes Make the ua structure a class, and implement send_msg(),
2371 error_msg(), warning_msg(), and info_msg().
2373 kes Apply fix from for building wx-console on the Mac from
2375 kes Implement new select mechanism for GUI programs.
2376 kes Reorganize initialization of stackedWidgets in bat.
2378 kes Add updated nagios plugin supplied by Christian Masopust.
2380 kes More bat implementation.
2381 kes File migrate bug with Pool Occupancy using mediaid instead
2382 of jobids. Fixes bug #795.
2383 kes Fix orphaned buffers in filed backup and verify due to
2384 crypto buffers not freed during errors. Fixes bug #789.
2385 kes Extend new GUI api code to tree commands.
2386 kes Ensure that tree and dot commands check console ACLs.
2387 kes Permit marking directory with trailing slash.
2388 kes Allow 20 console connections (instead of only 10).
2390 kes Add smartctl call to bacula-sd.conf as an example of getting
2393 kes Modify jobq.c to let simultaneous restore jobs run. This may
2394 cause them to fail if they cannot get a drive.
2395 kes Add Client Connect Wait to Storage daemon to permit users to
2396 modify the time the SD waits for a FD connection.
2398 kes Correct virtual changer check which was backwards. This caused
2399 volumes to be unloaded into slots already occupied.
2401 kes Apply Command ACL filter to JobId list in restore command.
2402 kes Correct typeo in var.c patch.
2404 kes Don't let Bacula prune File or Job records for the current Job.
2405 kes Fix variable substitution pad + inc bug reported (with patch)
2408 kes Correct SQLite log table index as reported by Luca Berra.
2410 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
2412 kes Begin implementing new comm signals for API.
2413 kes Fix a few places in lib/message.c where the open fd may
2415 kes Continue implementing lib/bsock.c (real class). Make jcr,
2416 who, host, and port private. There are new methods to access
2417 them for non-class use. This required touching a number of files.
2419 kes Add LANG=C to autoconf/randpass so it works with languages other
2420 than English. Fixes bug #788.
2422 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
2424 You will not be able to generate Include/Exclude list any more.
2425 It will be fixed soon.
2426 If you want to use this, you can apply
2427 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
2429 kes Restore of sockets created false error messages because Bacula
2430 no longer restores sockets, but the code was still trying to
2431 set the attributes on a non-existent file. Reported by a user.
2432 ebl finish RecyclePool feature
2433 Media will takes Pool.RecyclePool
2434 when moving from Scratch to a Pool or when user will do
2435 update volume=xxx frompool
2436 To use it, add RecyclePool = aPool to your Pool resource
2439 RecyclePool = Scratch
2443 kes Expand new BSOCK class adding signal() and new BNET signals.
2444 kes Begin enhancing the dot commands adding a new API function
2445 that returns more information and will make it easier
2446 to interface to the Director from a program.
2448 kes Make DEVICE fd private. Its new name is m_fd, and can be
2449 obtained with dev->fd() outside the class. This is the
2450 first of many DEVICE members to be made private.
2451 kes Implement Michael Renner's idea on having a virtual disk
2452 changer. I made some minor modifications (e.g. I did not
2453 implement the Virtual Changer directive, but simply set
2454 the Changer Command to an empty string.
2456 kes Implement a BSOCK send() method that writes the whole record
2457 in a single write() request rather than in two.
2458 ebl add update volume=xxx recyclepool=yyyy
2459 volume takes recyclepool from pool when using update volume=xxx from pool
2461 kes Fix encryption deblocking bug, which caused some restored files
2462 to be truncated. This fixes bug #763.
2463 kes Add FD event sequence order prepared by Eric -- for RunScripts.
2464 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
2466 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
2467 ebl Use btime_t instead of uint64_t in media patch.
2469 kes Optimize the use of the database a bit in the Status dir command.
2470 Only open it when needed, ensure that if any previous database
2471 was opened, it is closed.
2473 kes Correct VolCatBytes bug from media patch.
2474 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
2475 in the case of orphaned records.
2476 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
2477 and File records in 300K chunks to be more efficient. This
2478 idea came from Juan Luis Frances (if I remember right).
2479 kes Apply Eric's scratch patch that moves a purged Volume to
2480 the RecyclePool. Question: how is RecyclePool set? what
2481 happens to the ScratchPool?
2482 kes Apply Eric's media patch that collects read/write media
2483 times as well as byte counts. This patch requires a
2484 simultaneous upgrade of the DIR and SD. Note, there
2485 should be some way to turn off timing. I'm not sure
2486 times are in Bacula units.
2487 kes Apply Eric's batch-insert patch.
2489 kes Update projects list.
2491 kes Implement Include/Exclude file lists in FD as dlists using
2492 the new dlistString class. This permits efficiently having
2493 large include/exclude lists and completes project Item 25.
2494 kes Fix dird/ua_cmds.c so that a cancel command checks if the
2495 console is authorized to cancel the job. This fixes bug
2497 kes Modify SD so that the VolCatJobs medium record is updated
2498 at the beginning of a Job rather than the end. This
2499 fixes bug #775 where exceeding MaxVolJobs caused jobs
2501 kes Added a mutex around getting and setting Volume information
2502 so that multiple simultaneous jobs will single thread.
2504 Switch to using Subversion
2505 kes Remove src/pygtk-console/ from configure
2507 kes Delete src/lib/btree.c from win32 build, then add rblist.c
2508 plus the entrypoints.
2509 kes Apply patch supplied that corrects debug print
2510 in canceling jobs for max run time. Supplied as
2511 part of bug #621, which was previously fixed.
2513 kes Test on job_canceled() and sd_msg_thread_done inside
2514 loop starting the message thread to avoid a race condition.
2516 kes Remove rl_catch_signal from console.c as it conflicted
2517 with the header definition. Fixes bug #765.
2518 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
2520 kes Clarify some stored/acquire messages to indicate if the
2521 problem is with read or append.
2523 kes Fix memory leak with storage ids in cats/sql_get.c
2524 kes Terminate watchdog earlier to avoid reference to released
2525 memory -- reported by Jason Austin.
2526 kes Move closing the database from jobq.c to the director daemon
2527 termination routine. This fixes memory leaks for shadow jobs
2528 (i.e. migration jobs).
2529 kes Free up the unique jobid chain items in migrate.c. This fixes
2530 a memory leak problem.
2531 kes Convert some ugly looking for statements to use foreach_alist
2532 in findlib/find.c. This will facilitate converting the structures
2533 to use dlist (for large include/exclude lists).
2534 kes Fix a bug in the btree.c and btree.h routines, then rename them
2535 rblist and add them to be built in src/lib. Include some new
2536 methods written by Rudolf Cejka that make the code more readable
2537 (hides some of the ugly casting).
2538 kes Add set_next() and set_prev() methods which make the code much more
2539 readable. Also add a new dlistString class that facilitates storing
2540 strings in dlists. To be used in the large include/exclude lists.
2541 kes Make some trivial modifications to lib/tree.h that use rblist
2542 rather than dlist for storing the tree links. This was suggested
2543 by Rudolf Cejka. The result of this is that the restore tree now
2544 uses red-black binary trees rather than simple linked lists. This
2545 should give rather dramatic speed improvements for directories
2546 contining large numbers of directories/files (more than 10000).
2548 kes Fix maxruntime bug #621.
2550 ebl Implement the include JobID in spool file name project.
2551 kes Reorder projects file in order determined by Jan 2007 vote.
2552 kes Implement item #12 on project list -- quick release of FD by
2554 kes Fix open of SQLite3 db where user does not have write permission
2555 so that DIR does not crash. Fixes bug #761.
2557 kes Add back missing @ in Win32 Makefile.
2558 kes Change 'Device not configured to autolabel' from INFO
2560 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
2561 which should restart an indefinite # of times.
2562 kes Fix configure --help to print --with-mysql[=DIR]. Same for
2563 other DIR specifications.
2565 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
2566 Fix path quoting in SQLite scripts.
2567 Fix problems with SHGetFolderPath.
2569 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
2571 kes Fix Job restart on error bug that promotes an Inc to a Full
2572 backup. This should fix bug #755.
2573 kes Add qt-console and first cut of code.
2577 kes Fix Bacula->Documentation link on Win32 to point to index.html
2578 instead of bacula.html. Fixed bug #750.
2579 kes Return JobId in db_get_job_record() when JobId==0. This should
2581 kes Do not release source pointers when restarting a failed job.
2583 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
2584 This *should* fix bug #747.
2585 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
2588 kes Modify USTORE constructor to set an empty store_source string,
2589 and don't copy the store_source string in a cancel. Hopefully
2590 this will fix Arno's seg fault, bug #744.
2591 kes Add back code to disable conio in configure. Fixes bug #743.
2592 kes Correct the Options scanner in the FD to correctly handle
2593 SHA1 option, which was eating the next option. Reported by
2595 kes Add code to indicate when the SD is spooling, spool wait, and
2596 despooling as requested by Alan Brown.
2598 Version 2.0.0 released: 4 January 2007