1 Technical notes on version 2.5
9 Multiple command/console per runscript
10 console command in runscript
13 State file updated on job term
16 Duplicate Job directives
20 Improved status commands for Bat
21 Spooling/despooling status
22 Implement ftruncate for NFS devices
23 Add long term statistics job table
29 ebl Add new "status storage slots" that list autochanger
31 ebl Update vtape driver to compile only under linux.
32 ebl Fix a bug when restoring with a wrong mediatype.
34 kes Eliminate ints from conf files and structures to avoid
35 word alignment problems
37 kes Fix bug reported by Scott Barninger where the bacula script
38 refers to scripts in the wrong directory. Needed to meet the
39 requirements of recent FHS location changes.
40 ebl Disable vtape for FreeBSD.
42 ebl Modify disk-changer to check if slot contains something before
45 ebl Fix vtape on win32 and debian.
46 ebl Fix autoselect patch (cause segfault).
48 ebl Fix autoselect option broken for a while. Fix #1089. Need some
49 work with StorageId to be able to use a particular drive in a
52 ebl Rename faketape to vtape.
53 ebl Update faketape driver.
55 ebl Modify faketape driver to avoid sparse file.
56 kes Add make clean of qt-source directory during ./configure
57 kes Store last block number written to tape in DEVICE and
58 use it for testing for correct last block on EOT.
60 Release Version 2.4.0:
64 kes Make sure to clear JS_WaitMedia when operator mounts a Volume.
67 kes Add create_postgresql_database.sql to Win32 installer. Should
68 fix problem reported by Juilio Monteiro.
69 kes Get correct slot when auto unloading a device. This fixes bug
72 kes Fix multiple media restore.
73 kes Make DEVICE Slot private and access it via a method.
74 Allows better control over when it is set and cleared.
75 kes Fix possible seg fault if SQL error.
77 kes Add Martin's fixes to argument scanning for the estimate
78 command. This fixes bug #1093.
79 kes Add debug code to SD.
80 kes Fix renaming a Volume, which used the wrong Volume name.
82 kes If operator has rewind tape, print warning, release tape and
83 try once more. If tape is positioned somewhere, something went
84 wrong, so mark the tape in error and try once more. Previously
85 this error was fatal, now it produces an error message.
86 kes Ensure correct volume name displayed during restore
87 kes Ensure that Volume is mounted for restore.
89 kes Fix a few more Coverity reported problems.
91 kes Apply Allan Black's status dir job count patch.
92 ebl Add information about IMPORT/EXPORT slots in mtx-script.
93 kes Enhance a couple of SD debug messages.
94 kes Tweak unload flag setting and ensure it is set during swap.
96 ebl Fix #1091 about bad output in estimate command.
98 kes Modify autochanger locking to attempt to avoid race
100 kes Make sure device not busy before doing label command.
101 kes Display open() errors except when polling. Previously too
102 many were suppressed. This should fix bug #1070.
103 kes Fix Win32 reparse points. Bacula will not recurse into any
104 reparse point directory, including mount points, unless the
105 directory is explicitly mentioned at the top level (same as
106 with Unix). A file that is linked to another file will be
107 backed up -- much as Unix does for hardlinked files.
108 This fixes bug #1041.
110 kes Remove double quotes from ChangeLog and ReleaseNotes
111 kes Remove StorageId test when pruning and recycling (Eric's changes).
112 kes Remove old form of locking when getting volumes -- causes deadlock.
113 kes Change bat dirstat layoutWidget to dirstatlayoutWidget to make
114 the name unique and to eliminate compile time error.
115 kes Add accurate.o to Win32 FD Makefile
117 kes Fix cats dll build on Win32 after db_update_job_end_record
118 calling sequence change.
119 ebl Switch to tokyo dbm instead of htable in accurate code
120 ebl Include tokyo dbm to bacula source tree
122 kes Fix buffer overruns detected by Coverity.
124 kes Tweak joblog display.
126 kes Implement --without-qwt
127 kes Fix layout of restore tree dialog
128 kes Add configure bat QWT libraries, so that bat can be built
129 with or without the QWT libaries.
131 ebl Add dummy tape driver for regression tests.
132 kes Make sure we unload the right slot when swapping.
134 kes Add debug times, reduce size of two-pool-changer test
136 ebl Tweak autoconf scripts for faketape
138 kes Improve SD reserve debug code.
139 kes Testing an improvement to free up volumes no longer in use.
141 kes Rework SD acquire for read to handle autochanger Volume
143 kes Implement regression that explicitly tests swapping a Volume
144 from one drive to another.
145 kes Enhance disk-changer to detect most error conditions.
146 kes Fix SD code so that it properly swaps a Volume between drives.
147 This fixes bug #1083.
149 kes Apply libdbi patch from Joao Freitas for regress and for
150 Bacula trunk. Regress now works with libdbi. Nice.
151 kes Apply .nobackup patch from bug #1077 submitted by
153 kes Apply Bastian Friedrich's patch that adds %p to edit the pool
154 name into jobs cloned via the run directive.
156 kes Prevent a Volume that is being swapped from being freed from
157 the volume list. This will most likely fix, at least partially,
159 kes Fix strippath so that it does not get a buffer overrun and crash FD.
160 This fixes bug #1078.
161 kes Remove 50 millisec wait in SD that broke debugger.
162 ebl Add MaxRunSchedTime option that specifies the maximum allowed time
163 that a job may run, counted from when the job was scheduled.
164 ebl Fix MaxWaitTime option that specifies the maximum allowed time that
165 a job may block waiting for a resource, counted from when the job starts
166 ebl Rename (add) Max(Incr|Diff|Full)WaitTime to Max(Incr|Diff|Full)RunTime
167 kes Apply patch from bug #1076 by Tullio Andreatta <t.andreatta@troppoavanti.it>
168 that implements multiple commands per line in the console when using
169 readline. Modify the default to use a semicolon as the command separator.
171 ebl Fix SQL query in migration code.
172 ebl Make accurate mode with hash disk pass regression tests
174 ebl Implement first cut of accurate backup with hash disk.
176 kes Force unload of volume when wrong volume mounted in SD.
178 kes Fix bat seg fault at termination.
179 kes Add Bacula generated version to bat about box.
182 kes Experiment with allowing multiple read jobs.
183 kes Move final volume swapping code to DCR method and
184 call it from acquire_for_read().
185 kes When wrong volume is mounted during read, unload_autochanger.
187 kes Integrate the libdbi changes from Joao Henrique Freitas
189 kes Stop searching for Volumes in SD askdir if DIR returns the
190 same volume name twice in a row.
191 kes Close bat console windows first to eliminate error message
194 kes Tweak the swap Volume from one drive to another code so that
195 it now seems to work.
196 kes Resolve several problems with recycling that broke the new
197 code (these problems are in 2.2.9 as well).
198 kes Remove the volume lock when calling the sysop code.
199 kes Don't mark a reserved volume with no writers as unused otherwise
202 kes Rework class structures for VOLRES, DCR, and DEVICE to make
203 the method names a bit more logical, and for more logically
204 handling the responsibilities.
206 kes Remove redundant code in terminating the scheduler that just
207 causes a seg fault in many cases.
208 kes Cleanup releasing a volume and make it a DCR method.
209 kes Improve algorithm for detecting pre-reserved volume and
212 kes Tweak volume swapping code so it works.
213 kes Correct name overloading in mount.c
214 kes Replace released flag in VOLRES with reserved and add access
215 methods for the VOLRES class.
216 kes Prevent volume from being released while being swapped.
217 kes Apply Bastian Friedrich's edit codes patch for the bpipe-fd
219 kes Apply Bastial Friedrich's edit pool=%p patch for run clone
221 kes Refactor parts of stored/mount.c
223 ebl Add sanity checks for VolWriteTime and VolReadTime
224 ebl Take care of bad clock changes while computing VolWriteTime
225 and VolReadTime. This should fix or limit #1066
226 kes Correct error string numbers in dird/catreq.c
227 kes Restructure reserving, acquiring, and mounting volumes. Calls to
228 autochanger are deferred for mount.c -- simplifes the code.
230 kes Do not prune any running job. It just fails the job.
231 kes Lock the volumes when changing dev->reserved_device and marking
232 the volume unused otherwise the device can get reserved by
233 another job before the volume is released, thus blocking it.
235 kes Correctly detect Ubuntu systems, and add ubuntu platform directory.
236 kes Fix bug #1063, reuse of freed ptr in list nextvol.
237 kes Release regex compile buffer in filed/job.c
238 kes Add proper type of const char in sql_create.c
239 kes Turn off debug in daemon termination routines
240 kes Move free_volume_list() before devices are freed in stored.c
241 kes Fix reference to uninitalized stack variables in bregex.c.
242 This should correct bug #1067.
244 kes Fix possible seg fault in SD when freeing a volume entry.
246 kes Implement unload_dev() before swap device.
247 ebl Add statistics prunning with option and menu
248 kes Separate unload_dev() from unload_other_device() in autochanger.c
250 kes Apply patch from bug #1069 that corrects spurious error messages
251 when ACLs enabled on SGI but no ACL exists.
252 ebl Fix small segfault in bacula-sd when debug level is 500
253 kes Modify run_program() and run_program_full_output() to use
254 call by reference for the results string. This corrects a long
255 standing problem where the address of the string may be changed
256 in the subroutine but not in the calling program.
258 kes Re-enable code to remember last volume mounted on a non-tape
260 kes Add patch supplied in bug #1068 that fixes a SD crash when using
261 a Virtual autochanger.
262 kes Generate correct JobMedia records during spooling/despooling when
263 running concurrent jobs. Thanks to Tom Ivar Helbekkmo
264 <tih@hamartun.priv.no> for excellent analysis and testing.
266 kes Tweak hash algorithm for htable using Martin Simmons idea
267 for doing a circular shift.
268 kes Remember what volume is in VTLs (previously turned off for
270 kes Analysis of JobMedia records by Tom Ivar Helbekkmo <tih@hamartun.priv.no>
271 pointed out some problems in creating JobMedia records during
272 spooling with concurrent jobs. Fix the problem by updating the
273 start file position before despooling and generate a jobmedia
274 record at the end of despooling.
276 kes Fix handling of JobMedia records during spooling and when a
277 Volume is changed without actually writing data to the Volume.
279 kes Rework certain SD locking based on gdb tracebacks of deadlocks
280 sent by Eric. This code now uses only the volume_lock() rather
281 than the reservations lock when at EOM and acquiring a new
283 kes Ensure only one exit point in several subroutines.
285 kes Implement bsock code to permit locking. Use the new code in Verify
286 in the FD to prevent the heartbeat thread from disrupting the Verify
287 data sent to the Dir.
288 kes Modify SD locking to eliminate locking the reservations system from
289 outside the system. Use the volume lock when getting media data
290 and reserving a new volume at end of media.
291 kes Add Eric's volume_unused() fix to stored.c so that Volumes found
292 when SD starts are not locked into place.
294 kes Fix error compiling runscript code on 64 bit machines.
295 kes Tweak Win32 mount point code.
296 kes Fix a couple of bugs in the accurate code (bad sscanf, buffer not
297 cleared giving bad file estimate).
298 kes Implement BIG_MALLOC in htable code. Runs 2.5 times faster for
301 kes Keep Schedule run lists in order as suggested by
304 kes Implement autostart scripts for Debian.
305 ebl Implement upgrade catalog scripts.
307 ebl Apply jobstat patch for long term statistics. Have to implement
308 purge stats command and upgrade scripts.
309 kes Fix mtx-changer.in for broken Debian mt program.
311 kes Fix large number of JobMedia records reported by Eric Bollengier.
313 kes Apply doc fix from bug #1062.
314 kes Resolve crash and improper restore wx-console Win32 restore
315 GUI. Fixes bug #1065.
316 kes Update Win32 wxWidgets to latest version.
317 kes Attempt to do correct handling of Win32 mount points. Should
319 kes Fix Win32 FD backup/restore memory leak due to improper termination
320 of BackupRead/Write. This fixes bug# 1038.
322 ebl Reduce memory usage for accurate backup, working only with ctime
323 and mtime. (not all Lstat field)
324 About 40MB for my linux system (400.000 files)
326 kes Add dcr->reserved_volume flag that allows us to release a volume
327 even if it is not vol->released. This allows maxvol2 to work when
328 Volumes expire and we are already writing to the device (i.e. a
329 volume is pulled out from under us by another job terminating after
330 we reserve the drive).
332 ebl Permit multiple command/console per runscript definition.
333 RunScript { command = /bin/true ; command = /bin/false ... }
334 ebl Add RunsWhen = AfterVSS to runscript. You can execute a command
335 (restart an application) just after the VSS snapshot on windows.
336 kes Don't zap dcr values during release_volume() as they might
337 have the next Volume to be mounted.
338 kes Fix AIX prototype.
340 kes Second cut of drive switching during backup.
343 kes Update Win32 version of wxWidgets to most recent version.
344 kes Tweak Copy job details.
345 kes Rework dir_find_next_appendable_volume to make a bit more effort
346 to find a suitable volume before giving up.
348 kes Make ask_sysop_to_create... to return if waken from wait.
349 This helps get out of blocked conditions.
350 kes Experimental implementation of switch_device in reservations.
351 kes Implement FD version to allow easier protocol changes.
352 kes Add Plugin Options string -- not yet passed to FD.
353 kes Implement PluginOptions ACL.
355 kes Attempt to correct problems with restores with autochangers and
356 use counts going negative
357 kes Rework SD status command and implement API for bat. Implements
358 header, runing waitreservation, devices, volumes, spooling,
359 and terminated status keywords.
360 .status storage=xxx <keyword>
361 kes Clarify TLS error message by adding double quotes around name.
362 kes Simplify SD/FD status code by putting api flag in STATUS_PKT
363 kes Pass jcr to tls routines so debug messages can be handled better.
364 kes Rework jobq resource allocation code, and possibly fix a bug
365 that caused reference counts to get out of sync.
367 kes Rename fd/dir plugin to use Bacula standard underscore.
368 kes Plugin work -- bring dir up to fd level.
369 kes Start implementation of VTL code
370 kes Fix Win32 build after adding new cats subroutine.
372 kes First cut at Duplicate Job implementation.
374 kes Fix bugs in MaxFullInterval and Implement MaxDiffInterval.
375 kes Start PluginOptions string, and refactor a bit of ua_run.c
376 ebl Apply Allan patch that permit to reset recyclepool.
378 kes Test patch -- possible fix or improvement for bug #1053
379 kes Refactor FD and SD status commands to permit new API code in
380 SD, and to fix Win32 build.
381 kes Win32 build is now working.
383 kes Implement 'MaxFullInterval' and start 'MaxDiffInterval' based on
384 some ideas in patch from Scott Bailey.
385 kes Begin implementation of duplicate Job control.
386 kes Fix some of Win32 build after recent additions.
387 kes Apply patch from Frank Kardel that implements 'honor no dump flag',
388 which causes the FD to detect whether or not the OS has the
389 honor no dump bit (*BSD systems), and if so, to skip backing up
390 any file with this bit set. The feature is enabled by setting
391 'honor no dump flag = yes' in the Options section of a FileSet.
393 kes Correct po warning message with datarootdir
394 kes Implement more code in dird.c to put configuration parsing in
395 a class rather than use globals.
396 kes Restructure SD status command for implementation of bat API
399 kes Suppress incorrect 'Will not descend from x into y' messages.
400 kes Eliminate FORTIFY_CODE=2 bug, and make first cut at removing
401 daemon globals used by parser.
402 kes Apply Joao's patch to separate DB_TYPE and DB_PROG in configure.
404 kes Fix free of plugin_list when none exists.
406 ebl Apply accurate project patch.
408 ebl Fix a segfault when using strip_path option. (Use of pm_strcpy
409 on non-mempool object)
410 kes First cut of converting FD .status to work with bat API.
412 .status client=XXX header
413 .status client=XXX running
414 .status client=XXX terminated
415 kes Implement first cut of Copy Job.
416 kes Implement Catalog in Pool resource. It overrides catalog specified
417 in the Client resource.
419 kes Apply patch (with some difficulties) from Joao Henrique Freitas
420 <joaohf@gmail.com>, which adds support for libdbi as a Bacula
422 kes Add patch from Martin Schmid scm@apsag.com that checks to see if
423 ftruncate() actually works. In the case of some (cheap) NAS devices,
424 it does not, and so recycling NAS Volumes does not work. The code
425 simply unlink()s the file, then recreates it. This fixes bug #1011.
427 kes First incomplete cut of big malloc blocks for htable.
428 kes Tweak plugin code.
430 kes Plugin debug code + tweak a couple bat dialog layouts
432 kes Fix creating first JobMedia record during Migration to include
433 proper index. This caused slow restores of migrated jobs.
434 kes Temp fix to plugin name file_index.
435 kes Bacula backed up and restored a MySQL database.
437 kes Implement plugin restore.
438 kes Implement parsing of db_driver to give db_type index.
440 kes First cut of plugin restore code.
441 kes Fix bug #1047, which had a heap overrun when stripping certain paths,
442 and do not strip paths on symbolic links.
443 kes Set catalog backup database and user name from values specified on
444 the ./configure line.
445 ebl Fix #1031 about wrong pool source information in job report.
448 kes Remove a redundant jcr argument to find_files, match_files, and
450 kes Implement '.status dir header|scheduled|running|terminated' that
451 prints the requested status section. With the exception of the
452 header, the other reports have fields separated by tabs (\t).
454 kes Apply patch from Peter Much <pmc@citylink.dinoex.sub.org> that fixes
455 a resource embedded run command to find a since time if no explicit
456 since time was supplied on the command line.
457 kes Apply state-file.patch sent by Allan Black <Allan.Black@btconnect.com>
458 that updates the state file at job termination time in addition to
459 when the daemon terminates.
461 kes First version where a plugin did a backup.
462 bpipe-fd.so created a backup file, wrote a test
463 string to it, and Bacua could restore this fabricated file.
465 kes Implement DB Driver = string for the DBI driver.
466 kes Remove all old bdb_xxx.c code. Add dummy routines to bdb.c
467 kes First cut of code for loading Win32 plugin dlls. Implement
468 dlopen, dlsym, dlclose, and dlerror in src/win32/compat/compat.cpp
469 and implement a dlfcn.h file based on opengroup's definitions of
472 kes First cut plugin directives.
474 kes Apply patch from bug #1049 to prevent stripping the path on a
476 kes Attempt to fix bug #1047 where stripping a path corrupts the
477 heap. Waiting for feedback.
478 kes Correct the Mount message not to suggest labeling a new tape
479 when doing a restore. Submitted by email by John Stoffel.
480 kes Attempt to work around gcc FORTIFY_SOURCE bug that crashes the
481 FD by using casting. Reported in bug #1042.
483 kes A bit of crypto cleanup. More later.
485 Release Version 2.2.8
487 kes Apply patch from Martin to correct bug #1040, bscan sets existing
489 kes Fixed important spelling error in doc -- bug #1045.
491 ebl Fix bextract to be able to extract non-portable Win32 data to
493 kes Move initialization of read/write res lock earlier in the code.
494 This fixes the crash with a null conf file. This fixes bug
496 kes Redefine CURES in lib/parse_conf to be URES and move it all
497 into lib/parse_conf.c -- this responds to bug #1042, but does
498 not fix it. The fix is not to compile with FORTIFY_SOURCE.
499 kes Backport to 2.2.8 fix de-referencing a NULL pointer in the scanner from
500 the trunk SVN. I don't think this was reported as a bug.
502 ebl Fix a bug during tape initialization with MTSETDRVBUFFER.
504 kes Fix Win32 build with new .def files and DLL_IMP_EXP ...
506 kes Add DataDespooling and DataCommitting status (committing is
507 the last despooling).
508 kes Finish implementation of new reservations code noted below.
510 kes Fix bsnprintf for float point numbers. I broke recently when
511 parameterizing some variables. This fixes bug #1036.
512 kes Undo recent reservations changes ... will apply them later
513 when they work better.
515 ebl Fixes #1034 which cause mysql to hang the connection after 8h
516 ebl Change default statistics target of filename.name and path.path
517 fields for PostgreSQL. This speeds lookup by indexes. Thanks
519 kes A few more tweaks to new reservation code. Make sure to clear
520 vol released flag when retaking volume. When reading label and
521 label is bad mark volume unused. When recycling, mark volume
522 unused so it can be renamed.
524 kes Fix reserve_volume() so it doesn't release a volume in use
525 (i.e. a volume entry not marked released). This should be
526 the last part needed to fix bug #1018.
528 kes Move Heartbeat documentation from Job to Director resource.
529 This fixes bug #1033.
531 kes Fix existing switch drive SD code to call autochanger to release
532 any old volume. This must be done to keep the autochanger from
533 releasing subsequently newly reserved volumes in doing a close().
534 This should fix bug #1018.
535 kes Fail if attempting to get console input in batch mode. This
536 should help fail RunScript console commands that are incomplete.
537 kes First cut implementing switch_drive() in SD (not actually called).
539 kes Implement first cut running console commands in a RunScript.
541 ebl Fixes bug #1028 where 'Selection Type' option was not usable
543 ebl Fixes bug #897 and bug #1005 where bacula doesn't display runscript
546 Release Version 2.2.7
548 kes Add new free_tls() entry point so that Win32 builds.
549 kes Fix compile warning in src/lib/util.c
550 kes Fix entry point for edit_job_codes() so that Win32 builds.
551 kes Fix seg fault Frank Sweetser reports in regression testing
552 on his systems. The problem was that the original author of
553 bsnprintf.c did not take into account the side effects of
554 using ++x in the argument to a #define.
555 kes Make SD protocol backward compatible with version 2.2.x.
557 ebl Fixes bug #1015 where bacula failed to restore acl to a socket
558 because Bacula no longer restores sockets.
559 ebl Always use ignorecase fileset option on win32 FD.
561 kes Apply patch from Michael Stapelberg <michael@stapelberg.de>
562 that implements double quoting include names in conf files,
563 and also allows piping input by having the first character
564 be a vertical bar (|).
565 kes Apply patch from Bastian Friedrich <bastian.friedrich@collax.com>
566 that implement %f in RunScripts to pass the FileSet name.
567 kes Skip leading | when lex input comes from a pipe as suggested
568 by Michael Stapelberg <michael@stapelberg.de>.
570 kes Apply patch for bsmtp Win32 daylight savings time fix supplied by
571 Nerijus Baliunas <nerijus@users.sourceforge.net>
573 kes Implement Plugin Directory and plugin events.
575 kes Implement a security enhancement: TLS authentication but no
576 encryption. Enabled by setting 'TLS Authentication = yes'.
577 Note when this is on, TLS encryption is turned OFF!
579 kes This patch corrects a problem where the maximum concurrent storage
580 jobs counter gets out of sync during restore jobs causing jobs to
581 'wait on max Storage jobs'. This patch fixes bug #1009.
583 kes This patch fixes bcopy so that it produces correct Volumes.
585 kes This patch eliminates spurious output to the console during a VerifyVolume
586 job that contains encrypted data. It fixes bug #1024.
588 kes This patch prevents the 'status dir' command from trying to use a scratch
589 volume and possibly moving it from one pool to another. This patch fixes
592 kes Add new include to postgresql.c suggested by Marc Cousins so
593 that it compiles correctly with pgre version 8.3.
595 kes Fix --archivedir addition to configure. Replace it with
596 --with-archivedir in configure.in This fixes the regression
598 kes This patch fixes bug #1012 where the job is canceled because
599 of Max Run Time exceeded when the job has not yet started.
601 ebl Apply Richard Mortimer patch that fixes #1016 when there are more than
602 one 'part' to write. Instead of each part being stored on disk,
603 written to DVD, then deleted from disk, all parts are written to disk,
604 and only the last is written and deleted from disk.
605 kes This patch fixes the status command to include the formating string for
606 JS_AttrInsterting. It fixes bug #1021.
607 kes This patch should fix the Mac OS X build problem on the latest
608 Darwin, where sys/types.h was not included correctly (apparently
609 due to a change in the Mac headers). The solution was to explicitly
610 ensure that it is defined for the ./configure.
611 This patch also has a rebuild of configure that includes the Debian
612 qt4 patch to check for qmake-qt4. This patch fixes bug #1020.
613 kes This patch should ensure that queued messages to the console are
614 displayed as soon as possible. It should fix bug 1007, but has been
615 reported not to work.
617 kes This patch fixes the infinite loop when trying to increase the
618 maximum number of volumes in a Pool during the add command.
619 This patch fixes bug #1008.
621 Release Version 2.2.6
623 db Remove extra data on estimate command in joblist for bat.
625 kes Cleanup of code in SD that sets the LastWritten date. This doesn't
626 really change anything, but is the beginning of doing it *right*.
627 To do it completely right the LastWritten date must be passed to
628 the SD, but it is not yet done.
629 kes Minor tweaks to some bat restore SQL.
630 kes This patch fixes bug #1003 where putting the message output from
631 a Verify job into the catalog results in a recursive loop. The problem
632 seems to show up only with postgresql (to be verified).
633 kes Correct %x to %p in postgresql debug statement.
635 kes Fix bug #942 where lots of emails where generated when the heartbeat
636 interval was low and Bacula wanted a different tape from the one in
639 ebl Add new SD despooling attributes and Dir inserting attributes
640 job status codes in the catalog (Status table).
642 ebl Use qmake-qt4 instead of qmake when available (debian system).
644 kes Add a security warning to src/cats/make_catalog_backup.in indicating
645 that passing the password via the command line (arg 3) is insecure.
646 This responds to bug #990 (it doesn't fix it).
648 kes Set default debug_level to zero. This corrects bugs #991 and #993.
649 kes Fix a crash in bat when it cannot connect to the Director for example
650 if the Director is not running.
651 kes Remove redundant INDEX (JobId) from File table in the trunk.
653 kes Make explicit exception to GPL in LICENSE to permit linking
654 the Win32 FD with Microsoft VSS code.
655 kes Apply the Solaris package patch from
656 Masopust, Christian <christian.masopust@siemens.com>
657 kes Apply the patch to optionally add a timestamp in the debug output
658 submitted by Mariusz Czulada <manieq@wp.eu>.
660 ebl Use PQerrorMessage instead of PQresultErrorMessage in postgresql
661 backend (sql_strerror). Fixes bug #989
663 kes Apply Michael Short's <mdshort@gmail.com> Win32 regress patch.
664 It applied with no problems.
665 kes Add PATH command to SunOS part of mtx-changer.in so that sed and
667 kes Redirect stderror to stdin on mt status command in mtx-changer.in
668 since the status is returned on stderr on Solaris.
669 kes Activate Close button on tray-monitor window. This fixes
671 kes Check for NULL item in parse_conf.c before calling it. In the
672 case of Device, there is no item and this caused a seg fault when
673 Device appears in the conf file.
674 kes Add a #define __CONFIG_H when including config.h in bacula.h. This
675 avoids pulling in config.h multiple times in some new code.
677 kes Fix spurious warning message printed when creating a volume with
678 a LabelFormat. This fixes bug #976.
680 Release Version 2.2.5
682 kes Add JobId in place of Job name in all the Jmsg() output.
683 kes Correct the APP_DESC for the Win32 storage service (remove an e).
685 kes Make maxvol-test and new more strict maxvol2-test work.
686 kes Print JobId in all Jmsg() job output.
688 kes Add new SD despooling attributes and Dir inserting attributes
689 job status codes. This fixes bug 961.
690 kes Fix Win32 drive display in bat version browser. Fixes bug #962.
692 kes Fix doc issue. This fixes bug #963.
693 kes Fix listing performance problems in bat. Pointed out by
695 kes Remove old debug code.
696 kes Fix bat code that tests for Win32. This should fix bug #968
697 kes Query 5 list wrong Vol after migration. This fixes bug #960
699 ebl Fix #969 where user can't change Replace option in restore menu.
701 kes Save jcr in thread specific data (tsd) for each thread.
702 kes Make Dmsg() print JobId as -%u.
703 kes Make Jmsg, Emsg, and others automatically pickup the jobid
704 for the thread if it exists.
705 kes Remove old reservation debug jid code.
706 kes Remove get_jcr_from_tid() from OpenSSL and tls code.
707 ebl Add an option that permit to specify spool size in job
708 definition. (Applying patches/testing/spoolsize_per_job.patch).
709 You must upgrade SD and DIR at the same time.
710 dvl Add new configuration item --archivedir
711 dvl Adjust regression tests to use tmp not /tmp. This will allow
712 multiple concurrent runs of the regression tests.
714 kes Fix race condition that drops final block written to volume.
715 This happens in rare cases with multiple simultaneous jobs
716 when the Volume fills. This fixes bug #964. May be related
717 to bug #935 and possibly #903.
718 kes Eliminate more strerror() and replace with bstrerror().
719 kes Remove BSD getopt and replace with unrestricted IBM version.
720 kes Fix Win32 build for changed calling sequences.
721 kes More tweaks to the mount volume routines to get everything
722 right. Changed variable name from find to have_vol, which is
723 much easier to understand.
724 kes Enhance btimer debug code.
726 kes Fix FD->SD authorization failure, which was due to spurious
727 wakeups from a pthread_cond_timedwait(). Simply check the
728 predicate before continuing. This fixes bug #953.
729 kes Add const char where needed (more to do). Remove temp debug code.
731 kes Setup SQLite busy handler before doing queries. Fixes bug #967.
732 kes Don't overwrite error message in check_tables_version.
734 kes Unlock batch insert tables with same calls used elsewhere.
735 kes Allow starting 59 jobs a second.
736 kes Make SD session key more random.
737 kes Add retry for SQLite opening db if it fails. Probably helps
739 kes Suppress extra error messages during batch insert failure.
741 kes Add jcr to timer packets so if killed message can be sent to job.
742 kes Add JobId to all Dmsg() output.
743 kes Put some FD auth code on dbglvl rather than fixed.
744 kes Return insert attributes error message in db msg buffer to avoid
745 false error messages. Helps fix bug #966.
746 kes Separate batch init error messages. Probably helps fix bug #966.
747 kes Make SD code that contructs attribute insert check string lengths
749 kes If Dir gets an error during inserting attributes, cancel SD.
750 This reduces unnecessary error messages.
752 kes Correct search boolean for getting Volume info
753 ebl Cleanup batch insert code. Probably fixes bug #965.
754 kes Back out one small change to the reservation system (reserving a volume).
755 kes Rework how a Volume is mounted. It is now much more intelligent and
756 will always attempt to use any mounted volume if possible and reduces
757 calls to the Director asking about volumes.
759 kes Turn off some code when batch insert not enabled.
760 kes Edit FD name in connect error messages.
761 kes Rework the reservation system to take into account that the Director
762 might give us a Volume that is different from the current one being
763 used, and to ensure that we don't exceed Maximum Volume Jobs.
764 This fixes (mostly) bug #947 ' Maximum Volume Jobs = 1 produces
765 fatal error with multiple jobs running'
766 kes Add more debug code in reservation system.
767 kes Implement maxvol-test to check bug #947.
769 kes Add code to handle tray monitor separated from Win32 FD.
770 kes Fix display of Win32 tray monitor after reboot. Fixes bug #952.
772 kes Add missed return in fixing verify bug -- trunk only.
773 ebl Fix a command parser issue causing a director segfault.
774 kes Fix ANSI tape labeling. Fix restoring ANSI labeled Volumes.
776 kes Increase the max block size to 4MB fixes bug #957.
777 kes ERABT if user sets min block size > max block size. Fixes bug #956.
778 kes Apply 2.2.4-poll-mount fix, that resolves bug #908 where a tape
779 is not properly mounted (recognized) during a poll.
780 kes Apply 2.2.4-verify patch that resolves bug #958. A Verify catalog
781 Job that has differences reports Verify OK.
782 ebl Fixes #955 bug seg fault in Dir introduced with regexwhere relocation.
784 ebl Add an option to operate on all pools with update vol parameters.
785 This complete the project 20. Patch from Nigel Stepp.
786 ebl Add history support to bconsole when using readline.
787 Using Ctrl-D to exit doesn't update .bconsole_history
788 kes Modify new volume algorithm to use max MediaId for generating next
789 volume number rather than the count of Volumes. This should essentially
790 eliminate the failure rate if some volumes were deleted. Bug #921.
791 kes Begin implemention of Optimize Job Scheduling.
792 kes Implement restore callback that Dirk and I agreed on for bat
793 restore. This fixes bug #928. Restore of backup of zero files fails.
794 kes Fix SQL Catalog logging which broke with new db_escape_string
797 Release Version 2.2.4
799 kes Fix bacula_cats.def for new db_escape_string().
800 kes Increase size of name string when FD making connection to SD.
801 May fix bug #953. FD->SD connection failure.
803 kes Add code to help Dan debug 2drive-incremental-2disk test.
804 kes Add code to try to fix bug #908.
805 kes Add waits to multiple exit detection code to try to force pid
806 file to always be deleted.
807 kes Restore good dev.tar.gz to rescue set appropriate binary property.
809 kes Fix seg fault in error exit of acquire_for_read after unsuccessfully
810 trying to switch drives by checking for blocking before unblocking.
812 kes Cancel storage daemon in all cases where FD reports error. This
813 should fix virtually all cases of bug #920.
814 kes Fix db_escape_string() for MySQL which did not compile.
816 kes Fix error message that was clobbered when Dir tells SD it does not
817 have write permission on Volume. This should fix a minor point
818 in bug #942, but not the main problem.
819 kes Add code to cancel job in SD if FD connection fails. This should
821 kes Add code in FD exit to prevent loops and a crash on FreeBSD.
822 dvl Pass jcr and db into db_escape_string() to enable better escaping
824 kes Fix migration code to get correct Volume name with multiple volumes
825 by skipping |. Fixes bug #936.
826 kes Implement patch supplied by Landon to fix bug #944 where using
827 TLS with bconsole uses 99+% of the CPU.
828 kes Note, you need GTK >= 2.10 to be able to link the Tray Monitor
830 kes Move patches into patches directory.
832 ebl Fix bug #946 about 'bacula-dir -t' which doesn't works
835 ebl Using 'm' in bconsole will show messages like before,
836 and not memory usage.
837 kes Fix bug #935, and probably also bug #903 where files were not
838 restored. MediaId was not properly set in JobMedia record after
841 kes Suppress chown and chmod error messages if the FD is not running
844 kes Apply Martin Simmons' patch that should turn off the new API usage
845 when batch insert is turned off allowing building on older
847 kes Add ./configure search in qwt-qt4 for qwt package
849 kes Bacula is now free of 3rd party GPL copyrighted code!
851 kes Add guid_to_name.c/h which replace idcache.
852 kes Remove enh_fnmatch.c. Make code that references it use fnmatch.c
854 ebl Detect if new PosgreSQL batch insert API is present.
855 kes Correct incorrect mempool call causing Director crash. Occurs on
856 systems without va_copy().
857 sb Update spec files for 2.2.1 release
859 kes Fix memory pool call in ua_output.c. bug #934.
860 kes Replace fnmatch.c and fnmatch.h by modified BSD versions.
861 Add test program to fnmatch.c
863 kes Integrate patch to README.vc8 from
864 Hederer Jean-Sébastien <hedererjs@asperience.fr, had to manually
865 edit it to get it into Unix patch format.
866 kes Implement mkpath.c to replace old FSF makepath.c
868 kes Implement savecwd.h and savecwd.c. Remove FSF versions.
870 Release Version 2.2.1
872 kes Update POTFILES.in
873 kes Cleanup a few underquoted AC_DEFUNs in configure
874 kes Apply patch from Martin Simmons that adds a test for va_copy to
877 kes Fix bug #921 by increasing the number of tries to create a new volume
879 kes Rework bmsg in ua_output to use va_copy() so that bvsnprintf()
880 can be called multiple times. Implement a version for machines
881 without va_copy() that gets a big buffer.
883 kes Integrate more portable zone offset code into bsmtp.c
884 Submitted by Attila Fülöp.
886 kes Fix bad SD->FD return status reported by
887 (James Harper) <james.harper@bendigoit.com.au>
888 ebl Fix a bug in read_close_session which return random status
889 thanks to James Harper
891 kes Fix (hopefully) bug #930 by doing a db_escape_string() on file
892 and directory names during restore of single file/directories.
893 kes Add sanity checks to .sql command when string is empty. Hopefully
894 that will resolve Dirks Director crash.
896 kes Apply patch submitted by Martin Simmons that corrects a seg fault
897 in the bsmtp chat subroutine when debug is >= 10.
899 kes Fix Director crash when running bat SQL queries.
900 kes Add David's notes on Item 8: Copy pools.
902 kes Rework projects file to be current and ready for a vote.
903 kes Enhance lex scanner error message.
905 kes Tweak LICENSE file to mention BSD code.
906 kes Fix bat.pro.in so that it includes the OpenSSL libraries only
907 if specified on the ./configure.
908 kes Add first (not yet tested) cut of bcomm to the qt-console directory.
909 This class is intended to allow us to open a second bsock to the
910 Director while in the restore subdialog.
912 kes Fix configure to create bat Makefile before creating dependencies.
913 kes Eliminate the egg files from the tray-monitor. Use gtk calls.
914 kes Add a tooltip to the tray monitor.
915 dvl Set the Director's PID file before dropping privs. This fixes
918 kes Update AUTHORs file
919 kes Increase the default max concurrent jobs to 20 in FD and SD to
920 correspond with the default .conf files.
921 kes Rewrite the Win32 service routines. This eliminates the 3 copies
922 some different, of the same file created by RN when porting the
924 kes Rearrange some of the Win32 directories and the placement of the files
926 kes Set DEVELOPER flag in version.h
928 ========================================================================
929 Release Version 2.2.0
931 kes Apply a second doc patch from Marc.
932 kes Apply a doc patch from Marc Schiffbauer <marc@schiffbauer.net> that
933 improves the tips section that discusses how to setup multiple
936 kes Update bat README file.
937 kes Apply patch from Allan Black <Allan.Black@btconnect.com> that
938 corrects a typo in the Recycle status check in db_find_next_volume().
939 This will probably fix a number of annoying problems with multiple
941 kes Modify most of dird/msgchan.c to use bsock class calls rather than
942 bnet calls -- no functionality change.
944 kes Modify the Verify output to specify if files are missing on
945 the Volume(s) or disk. Fixes confusion in bug #916.
946 kes When more than one Volume is read in a migration job, the last
947 Volume bytes reported are from the last read volume rather than
948 the last written volume. Fixed. This fixes bug #910.
949 kes Fix display of Recycle flag after update volume=foo recycle=yes.
950 It previously printed New Recyle flag is: no. This fixes bug
953 kes Correct seg fault when switching tape drives during restore.
954 kes Commit uid_gid_name.c (replacement for idcache.c), but will not
955 be used until after 2.2.0 release.
957 kes Remove fnmatch() in SD that permitted wild card specifications.
960 kes Fix %g in filename returned by SQL for browse tree reported by
962 kes Fix configure so that it puts config.out in the cwd rather than
964 kes Attempt to fix the locking problem reported by Eric in bug #906.
965 kes Make berrno class to leave errno unchanged after constructor call.
966 kes Make bnet_server use the heap rather than the stack to allocate
967 its socket fd pointers to avoid a crash at termination. Problem
968 reported by Ryan Novosielski and bugs pointed out by Martin Simmons.
970 kes Create new depkgs and depkgs-qt separating the qwt out of depkgs
971 and putting it in depkgs-qt along with Qt4.3.
973 kes Rework code in acquire.c that switches drives for reading when
974 the Media Type does not match. This should fix bug #906
976 ebl Fix a director segfault during job setup #907
977 kes Correct seg fault in postgresql when first operation returns no
978 rows. Fixes Dirks File browser problem seg fault with bat.
980 kes Apply patch from Felix Schwarz <Felix.Schwarz@web.de> that allows
981 building wxconsole on Fedora 7 with wxWidgets 2.8 (it works with
984 kes Implement PopUp YES/NO dialog for bat.
986 ebl Fix a compilation bug when using #define BACL_WANT_NUMERIC_IDS
988 kes Correct RunScript to terminate job in FD on failure.
989 kes Change abort_on_error and AbortJobOnError to fail_on_error
990 and FailJobOnError in RunScripts.
991 kes Minor tweaks of code formating in RunScripts, principally to
992 avoid depassing 80 columns.
994 kes Eliminate one #ifdef Win32 in bsmtp
995 kes Implement grow tool to grow a file for testing very large databases.
996 kes Add big-vol-test to test Bacula seeking with > 5GB.
999 kes Modify find_next_volume() to return all values in Media record.
1000 kes Ensure that we keep Recycle Pool when moving Scratch volumes.
1004 kes Update Release notes
1006 ebl fix a bug in get_scratch_volume() report by Andreas Helmcke
1007 Warning, in previous beta version, all media get from scratch keep their
1010 kes Tweaked Win32 installer to remove temp conf files at uninstall time.
1011 This should fix bug #842. Made a note to look at removing the temp
1012 files at the end of the install.
1013 kes Add ability to mount and unmount a file device providing it is
1014 marked as being removable and has the appropriate mount and unmount
1015 commands defined in the Device resource. This fixes bug #830.
1016 kes When applying a storage override, release all previous storage
1017 definitions rather than just prepending the new storage.
1018 This should prevent a good deal of confusion.
1020 kes Implement ./configure search for qwt libraries.
1022 kes Disable posting the WM_CLOSE message in KillRunningCopy of the
1023 Win32 FD. This should fix bug #893.
1024 kes Remove an unnecessary beep in Win32 init code.
1025 kes Update copyright dates in Win32 executable about boxes.
1026 kes Replace the FSF copyrighted getopt.c and getopt.h in the Win32
1027 code with a BSD getopt.c and getopt.h.
1028 kes Remove sched.h from the Win32 compat directory -- not used.
1029 kes Remove the Exit menu item from the Win32 tray monitor. If you really
1030 need to shut it down, do it through the services panel or the command
1032 kes Remove some inappropriate Bacula FSFE copyrights.
1033 ebl Tweak status client=xxx to be more easy to parse (more like in 2.0.x)
1034 kes Fix regress config non-portable test as pointed out by
1035 Florian Heigl <florian.heigl@gmail.com>
1036 kes Fix PSCMD for HP-UX in configure.in to have proper syntax.
1037 as pointed out by Florian Heigl <florian.heigl@gmail.com>
1039 kes Fix missing rctx. prefixes on the Darwin code in src/filed/restore.c
1040 Reported by Frank Sweetser.
1044 kes Fix client-only build.
1045 kes Integrate client-only fixes for bsys (initgroups) and conio from
1046 Sergey Svishchev <svs@ropnet.ru> for the AIX platform.
1047 kes Make arguments to get_scratch_volume() in same order as other
1049 kes Rework the prune_volumes() subroutine so that after purging and
1050 no volume found in desired pool, it will check for a scratch
1051 volume. This prevents recycling the whole scratch pool.
1052 kes Add code to status storage to print boffset_t (largefile support).
1054 kes Move qwt (Graphics libarary for Qt4) to depkgs.
1055 kes You now need a --with-qwt=<dir> to be able to build bat.
1056 kes Update src/win32/cats/bacula_cats.def to include the new
1057 db_get_query_dbids() call on Win32.
1059 kes Correct a problem when selecting a scratch volume and moving
1060 it to another pool that lost some columns.
1061 kes Tweak some code in ua_update.c to use POOL_MEM instead of POOLMEM.
1062 kes Enhance Autochanger error messages to include Volume and device name.
1063 kes Rework prune_volumes() code to take account of InChanger flag,
1064 and to handle recycling volumes going to the Scratch pool and
1065 current pool because the RecyclePool directive.
1066 kes Implement a better and more efficient db_get_query_dbids() to
1067 handle creating and passing back a list of DBIds.
1071 kes Start work on new more efficient DBId subroutine. First use
1072 will be for recycling volume to Scratch inchanger.
1073 kes Increase number of JobIds in pruning from 1000 to 10000.
1074 This to be replaced by above routine.
1075 kes Begin implementation of building Qt4 on Win32.
1076 kes Correct typo in fix I added for bad TLS shutdown.
1077 kes Pull 2.0.3 patches into patches directory.
1078 kes Update Release notes. Include qt-console in line count.
1079 kes Update Projects file.
1081 kes Integrate patch from Sergey Svishchev <svs@ropnet.ru> that fixes
1082 bug in migration code where a job that spanned two volumes
1085 kes Implement new BST_DESPOOLING blocked state. Change from locking
1086 during despooling in SD to blocking. This means that other threads
1087 can work with the device structure, in particular the reservations
1088 system while despooling.
1090 kes Fix return in reservation message queue that missed clearing
1091 the jcr lock (implemented 26Jun07 below).
1092 kes Rename a number of dev methods to make locking function names
1094 kes Document locking in lock.c. Move lock structures to new file
1097 kes Move reservations message lock to lock jcr only this
1099 kes Move main SD locking code into lock.c (new file).
1100 kes Update Win32 build to include lock.c
1104 kes Dirk committed the qwt library code for drawing graphs in bat.
1105 kes Tweak install of qwt so that it is integrated with ./configure.
1107 kes Fix HAVE_BATCH_INSERT to be HAVE_BATCH_FILE_INSERT, pointed
1108 out by Eric (my typo).
1109 ebl Fix configure.in to get batch mode enable
1110 kes Return correct string from authenticate.cpp in bat when connecting
1112 kes Apply patch suggested by Frank Sweetser to fix bug #888 --
1113 spurious line drops when using TLS.
1114 kes Do not file reparse points when restoring a file that already
1117 kes Implement Windows reparse points -- similar to directories, but
1118 we do not descend into it. This is a first cut. They seem to
1119 be backed up, but restore is not yet tested.
1120 kes Remove restore_blocking in tls code when shutting a socket to leave
1121 it in blocking mode. Hopefully this will fix the encryption bug
1122 reported by Frank Sweetser.
1123 kes When opening a file for backup, tell the OS that we are going to
1124 read it sequentially -- optimization.
1125 kes Change variable names in authenticate_director() to not conflict
1126 with member names in bat. Caused great confusion with compiler,
1129 kes Queue openssl error messages in case of comm problem.
1130 kes Do shutdown() call if socket terminated.
1131 kes Remove some duplicated code in tls.c
1132 kes Move more of the bsock member variables into private and access
1134 kes Add Frank Sweetser's tls-test to the regression suite.
1136 kes Add Swedish sv.po file
1138 kes Don't print clock skew message in FD if less than 3 seconds diff.
1139 kes Add a bit of VSS info to status client.
1140 kes Implement a first cut of Vista VSS, using Win2003 code.
1142 Release: 2.1.20 beta
1144 kes Fixed bug #886 (multidrive autochanger: SD doesn't use drive with
1145 loaded tape but uses first drive).
1146 kes Fixed bug #807 Restore encrypted backup failed on Windows 2003
1147 This was indeed a Win32 issue.
1149 kes Simplify search of autochanger for in-use Volume.
1150 kes Fix exit condition of check for in-use volume. kes Remove
1151 inappropriate my_postgresql_free_result() in db_close()
1153 kes Fix bad return in FD when encryption signature not found.
1154 Probably caused a crash.
1155 kes Inhibit missing encryption signature error messages for
1156 file types where no signature computed.
1157 kes Correct inverted check on autochanger in reservation system.
1158 kes Tweak debug code in autochanger reservation.
1160 kes Add some additional locking in the cats directory in subroutines
1161 that modify packet variables called from batch insert.
1162 kes Rework how dcrs are allocated. new_dcr() can now be called
1163 with an existing pointer, and it will simply clean it up.
1164 This allows the reservation system to test various different
1165 devices, and will permit easy device changes.
1166 kes A bunch of changes all over to handle new new_dcr() calling
1168 kes Work more on the Volume management in the SD. Remember Volumes
1169 for tape drives and for autochangers (even virtual disk changers).
1170 kes When looking at the Volume list to reserve a drive, handle
1171 autochanger names correctly by interating through the changer
1172 devices. Also call the Director to see if a Volume is suitable
1173 for the current job.
1174 kes Fix some bugs in bscan. Make sure all media records are written.
1175 Make sure that valid JobMedia records are written for disk files.
1176 Previously they were completely wrong.
1177 kes Move source tar files for depkgs-mingw32 to www.bacula.org so
1178 that the URLs don't change and so that the developers will all
1179 work off the same copy. Rebuild from scrach.
1180 kes Upgrade Win32 SQLite3 from 3.3.8 to 3.3.17.
1182 Release: 2.1.18 beta
1184 kes Fix seg fault in FD from incorrect digest size.
1185 kes Fix argument to non-OpenSSL crypto.c subroutine.
1187 Release: 2.1.16 beta
1189 kes Remove a few malloc()s from the encryption code.
1190 kes Use the class calls to bsock in filed/backup.c and restore.c in
1191 place of the old bnet_xxx code.
1192 kes Implement code that does an on the fly calculation of the
1193 signing digest during restore of encrypted files. It makes
1194 a best guess at the algorithm, and if it is not correct, will
1195 then revert to the old code which reads the file after it is
1197 kes Implement at least one missing crypto stream in stream_to_ascii()
1198 kes Apply patch from William <chowmeined@gmail.com> that fixes bug
1199 #877 where a reload with bad syntax causes Dir to exit.
1201 Cut: 2.1.14 beta (not released)
1203 kes Do not free a volume on a tape drive until another volume is
1204 mounted and read, or the autochanger unloads the volume.
1205 This should help the SD re-use volumes that are already mounted,
1206 and should fix bug #886.
1207 kes Apply patch from user brettedgar that allows gnome2-console include
1208 the OpenSSL libraries, and hence work with SSL. Fixes bug #885.
1209 kes Apply patch from Lucien Weller that fixes day of week calculation
1210 because of DST flag problem. Fixes bug #887.
1212 kes Move find_next_appendable_volume() to after acquiring a valid device
1213 in reserve.c. This fixes bug #864 -- confirmed by reporter.
1215 kes Unable to reproduce bug 872. However added additional testing for
1217 kes Bug #874 resolved by documenting SQLite limitations.
1218 kes Bug #882 resolved by documenting mtx-changer script for new drive code.
1219 kes Bug #881 resolved by removing typo in mtx-changer script.
1220 kes Made Frank Sweetser's wiki the official Bacula wiki with his
1221 approval. Added a link to the wiki on the web page, and implemented
1222 a backup from http://paramount.ind.wpi.edu
1224 kes Fix update allfrompool to pass pool name.
1226 kes Convert to pure GPL v2 license.
1227 kes Fix sscanf problems reported by Peter Buschman that caused
1228 a bus error on Solaris.
1229 kes Rework (simplify) the select prompt in bat.
1230 kes Move get_jobid_from_tid() into lib and create a
1232 kes Use get_jcr_from_tid() to conver all tls Emsg() to Jmsg(). This
1233 should definitely fix the problem of lost error messages in the
1235 kes Remove over zellous addition of FSFE copyright in a few eggxxx files.
1236 kes Eliminate tcpd.h from the project. Enclose the #include from the
1237 library with extern C ...
1238 kes Add print of signal name when a signal is trapped.
1240 Release: 2.1.12 beta
1242 kes Fix a seg fault in the PostgreSQL driver dereferencing a NULL pointer.
1244 kes Implement SQLITE3_INIT_QUERY in version.h that can do an initial
1245 query for SQLite3. Use it to set PRAGMA synchronous = OFF. This
1246 makes SQLit3 run 30 times faster, though a bit less safe.
1247 kes Implement --with-batch-insert in configure and detection of thread
1248 safe libraries. It is on by default, but turned off if no thread
1249 safe library (e.g. SQLite 2) is available.
1251 kes Fix Bacula PostgreSQL buffer overruns.
1252 kes Do better checking for NULL results returned from PostgreSQL;
1253 implement retry for failed queries; clear results buffer after
1254 failed query. Hopefully this will correct the PostgreSQL failures.
1256 kes Implement algorithm to handle only one appendable volume with
1257 Prefer Mounted Volumes = no.
1258 kes Fix a Bacula PostgreSQL bug dereferencing a NULL pointer
1259 returned from a query.
1260 kes Make volume lock recursive.
1261 kes Implement an additional volume reservation algorithm that
1262 starts by considering all reserved volumes then uses the
1263 old brute force algorithm of searching the resources to
1264 find a suitable device.
1265 kes Add new reservations debug code and refine the old code.
1266 kes Update the win32/dll/bacula.defs file.
1268 kes Tweak reservations algorithm to permit a few more cases, i.e.
1269 volume reserved, but on different drive, ...
1270 kes Enhance SD status to include Pool and Media Type for drive in a
1271 more readable format (a bit longer).
1272 kes Fix PostgreSQL double free.
1274 kes Minor refactoring of restore decryption code.
1275 kes Add code to smartall.c to detect double free of a buffer.
1277 kes Add < > around %r in from field on mail command of bacula-dir.conf.in
1278 so that bsmtp will create a correct email address (mailbox only).
1279 kes Modify 'memory' command so that the buffers are listed as 'In use'
1280 to avoid confusion with Orphaned buffers.
1281 kes I reworked the OpenSSL include/lib flags to be handled in
1282 the standard Bacula way, which should fix bug #863 concerning
1283 non-standard OpenSSL libraries.
1285 kes Implement Help Browser window for bat.
1286 kes Fix reload bug that reset StorageId to zero.
1288 kes Fix TLS #ifdefing when TLS turned off.
1289 kes Ensure that when labelling a tape with Slot=0 that InChanger
1291 kes Use DISTINCT to make MySQL and PostgreSQL uar_list_temp query
1293 kes Add StartTime to final uar_sel_jobid_temp query so that we can
1294 add DISTINCT (required by PostgreSQL).
1295 kes Implement BSOCK authenticate_director() method. Eventually will
1296 authenicate all daemons.
1297 kes Move several more functions into the BSOCK class.
1299 kes Add code to tell the OS that we no longer need a cached
1300 file that we were reading. In findlib/bfile.c. Also,
1301 only cache files that we are reading. Thanks to
1302 Tobias Oetiker <tobi@oetiker.ch> for the idea.
1303 kes Tweak to bsmtp to eliminate compiler warnings on Win32.
1304 kes Implement script to automatically generate cats and dll .def
1305 files for Win32 dll.
1306 kes Update README.mingw32 to include new .def file generation.
1307 kes Correct typo in UTF-8 error message as reported by:
1308 jhernandez <julianhernandez@gmail.com>
1309 kes Add additional sm_check() code on debug level 1.
1310 kes Set default debug level to 1.
1311 kes Trap SIGABRT in attempt to get traceback.
1313 kes Reduce bat connect timeout from 30 to 15 seconds.
1314 kes More restructuring and implementing BSOCK class in place of
1316 kes Remove a few unnecessary malloc() tests in crypto code.
1317 kes Turn off crypto calls for > 128 bits in crypto.c if HAVE_SHA2
1318 not defined. Bug reported by Allan Black <Allan.Black@btconnect.com>
1319 kes Remove duplicate HAVE_CRYPTO definition in config.h.in
1321 kes Fix Verify InitCatalog mysql_escape_string() trashing memory.
1323 kes Fix Verify InitCatalog. The attributes were not pointing to the
1324 correct saved location.
1325 kes Implement message callback so that GUI is sure to get all
1326 daemon messages. Currently displayed in a dialog in bat.
1327 kes Ignore SIGUSR2 (Bacula timer) in bat.
1328 kes Apply regress patch from bug #859 to allow regress to work
1329 with Solaris compiler.
1331 kes Begin adding TLS support to bat.
1332 kes Apply UTF-8/16 patch from Yves Orton <demerphq@gmail.com> to
1333 clean up lex.c and make it more readable.
1335 kes Move more bnet functions into the BSOCK class.
1336 kes Fix tray-monitor by not requiring a timer interval in bnet_connect()
1337 kes Complete change of berrno strerror() method to bstrerror()
1339 Release: 2.1.10 beta
1341 kes Cleanup incorrect email addresses in bsmtp.
1342 kes Make bat display initial messages rather than discard them.
1344 kes First cut of adding .mod to the run command.
1345 kes Implement auto display of messages in bat.
1346 kes Enhanced preferences to allow all Bacula output to be
1349 kes Try to make bsmtp date routines more generic.
1350 kes Fixed bug #856 autochanger documentation.
1351 kes Rework bsmtp date editing for Win32. This fixes bug #854.
1352 kes Add new cats entry point so Win32 builds.
1354 kes Attempt to fix bsmtp date editing on OSes without %z editing.
1356 kes Do better checking for the MySQL 64 bit libraries looking for both
1357 .a and .so libraries.
1358 kes Add a kludge for Ubuntu's non-standard locations for MySQL -- allow
1359 /usr/include/mysql/mysql.h AND /usr/lib/... rather than /usr/lib/mysql/...
1360 kes Require the thread safe version of MySQL during configure. Thanks
1361 to Andre Noll for pointing this out.
1362 kes Ensure that calls to find_jobids_from_mediaid_list() check count before
1363 continuing in migration code.
1364 kes Apply implementation of tray-monitor font derived from gnome-console
1365 submitted by Andreas Piesk <a.piesk@gmx.net>
1367 kes Eliminate important memory loss in SQLite
1368 kes Fixed the batch insert MySQL thread specific data that was not
1369 being freed. See cats/mysql.c:db_thread_cleanup().
1370 kes Fix restore before command.
1371 kes Convert old hdr.name to name() in a few places.
1372 kes Implement update jobid command.
1373 kes Return all time_t dates in db_get_job_record()
1374 kes Stop watchdog in SD earlier.
1375 kes Put Pool just after Storage in please mount message.
1376 kes Fix pointer usage bugs in Verify InitCatalog pointed out by
1379 kes Update the po files.
1380 kes Fix Verify InitCatalog by making it cache attributes.
1382 kes Change name bacula-bat to bat for man 1 page to correspond to
1384 kes Check for client and store NULL pointers in status command. This
1386 kes Fix non-ssl build so that it works (add JCR *jcr to crypto structures).
1387 kes Fix sign extended editing of %p.
1388 kes Clean out a little old #ifdefing in cats/mysql.c
1390 kes If time diff between DIR and FD is more than 600 seconds convert
1391 INFO message to WARNING.
1392 kes Implement heap size display in status for all daemons.
1393 kes Attempt to fix MySQL db open memory loss (not successfull).
1394 kes Don't set SIGKILL and SIGSTOP neither can be trapped.
1395 kes Eliminate memory loss in MySQL (possibly other SQLs) during
1396 Query. This looks like a MySQL but but by doing extra releases,
1397 the memory goes away. This should fix bug #847.
1399 kes When backup fails, cancel SD before waiting for sd termination.
1400 kes If SD is waiting for FD to connect during cancel, wake up the
1402 kes Fix fsf code so that errno is correctly reported.
1403 kes Apply migration patch (with changes) from Sergey Svishchev <svs@ropnet.ru>
1405 kes Make lack of Pool directive in Job an ERROR_TERM rather than FATAL
1406 so that Bacula doesn't later stumble into a seg fault.
1407 kes Use the term Restore Client in the restore Job report.
1408 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that preserves
1409 the original job's FileSetId.
1410 kes Merge patch from Sergey Svishchev <svs@ropnet.ru> that implements
1411 spooling in migration jobs. Not yet tested.
1412 kes Merge patch from Jorj Bauer <jorj@seas.upenn.edu> that implements
1413 reading conf file from a pipe. However, do it with open_bpipe()
1414 rather than popen. Not yet tested.
1416 kes Fix an ugly bug where the VolCatBytes were getting updated
1418 kes Implement bconsole memory command that prints current memory
1419 usage, plus smartalloc dump.
1420 kes Clarify some error messages in backup, admin, and migrate.
1421 kes Shrink label dialog to smaller size.
1422 kes Invert Cancel OK buttons on restore to be OK Cancel.
1423 kes More strerror() to bstrerror() conversions.
1425 kes Start implementing bstrerror() in place of strerror().
1426 kes Stripping path -- seems to work.
1428 kes Prevent door and port files from being restored (mostly
1430 kes Free an unreleased buffer in compat code.
1431 kes Change console Job name from *Console* to -Console- to eliminate
1432 Win32 filename problems. Put Win32 path separator when creating
1433 Console file. This fixes bug #846.
1434 kes Change berrno::strerror() to berrno::bstrerror(). Not yet full
1436 kes Pass jcr to crypt_sign_decode because it creates a new SIGNATURE
1438 kes Define b_errno_win32 on Linux to be zero so that it can be or'ed in
1439 to force Win32 error message.
1441 kes First cut strip path. The data should be passed to the FD,
1442 but nothing is done with it yet.
1443 kes Enhance the digest and signature routines in the crypto
1444 library to accept a JCR and to use it to print error messages
1445 so that they will go in the Job report rather than the daemon's
1447 kes Simplify some of the verify signature code.
1448 kes Simplify a few of the alternative returns in the signature
1451 ebl Use only POSIX regex instead of GNU regex in breg.c for
1452 File relocation. It fix broken freebsd compilation.
1453 kes Convert all other Dir files to use new ua class message
1455 kes Tentative fix for missing digest signature in bug 807.
1456 kes Correct handle problem in new win32_ftruncate routine.
1457 kes Convert ua_purge.c and ua_update.c to use new ua class
1458 message routines for bat.
1460 kes Correct incorrect installation of LICENSE in Win32 installer.
1461 kes Display LICENSE at the beginning of the Win32 install.
1462 kes Attempt to correct the need for the png files to be installed
1464 kes Reapply my bat.conf install script in qt-console. I think I
1465 editted bat.pro instead of bat.pro.in and it was lost.
1466 kes Apply CentOS patches someone sent me. Checks for /var/run/subsys,
1467 the /var/lock/subsys for subsysdir. Also corrects typos in the
1470 kes First cut update job.
1471 kes Correct configure to include qmake of src/qt-console directory.
1473 kes Make restore job yes/mod/no print in one command so GUI works.
1474 kes First cut implementing backup and restore client.
1475 kes Correct editing in Verify output that caused a seg fault.
1477 kes Insure that bat.conf is not overwritten during installation.
1478 kes Fix important bug in db_sql_query() in mysql.c. It was introduced
1479 while I was implementing migration in March 2006 !
1481 ebl Cleanup file relocation, using char *RegexWhere instead of
1482 char *where + bool where_use_regexp
1483 kes Update some manpages and add bat manpage.
1484 kes Make a first cut at converting bacula.spec.in for bwx-console
1486 kes Apply patch from John Goerzen to add hostname as fourth argument
1487 to make_catalog_backup script.
1488 kes Fix typos I introduced into bsmtp.c
1489 kes Make pm_strxxx() routines handle input of NULL pointer. This
1490 is to protect from NULL pointers returned from SQL databases.
1491 kes Correct typo in bacula-sd manpage as pointed out by John Goerzen.
1492 kes Add more debug to FIFO code -- fix fifo regression test.
1494 kes Implement posix_fadvise in FD, and for reading spool files in SD.
1495 kes Add thread timer to bnet_connect() to break from OS if wait time
1498 kes Update Win32 build to include new files, new symbols, and
1500 kes Implement socket level heartbeat (tcp_keepidle)
1501 ebl Commit File relocation patch
1502 kes Make bat have 'make install' target.
1503 kes Warn during install if old gnome-console binary found.
1504 kes Warn during install if old wx-console binary found.
1505 kes Add -8 option to bsmtp command line to add content type utf-8.
1506 Fixes bug #809. (Character coding problem in bsmtp).
1507 kes If < is found in target (from, to, cc) then do not enclose the
1508 target in < > in bsmtp. Fixes bug #772 (malformed address).
1509 kes When printing certain items in dbcheck, stop after 300000.
1510 Fixes bug #822. (dbcheck loops).
1511 kes Incorrect status in Dir after waiting for mount with poll set.
1514 kes Extend idea of Prefer Mounted Volumes to mean a volume about
1516 kes Print waiting to reserve a device every 5 mins.
1518 kes Don't call close_part in label.c if tape and relabel.
1519 kes Don't free volume if busy in close() -- should help with
1521 ebl Fix #824 RunScript bug (After script could be execute twice)
1522 Now, Before Script can use RunsOnSuccess and RunsOnFailure options
1523 By default (like before) RunsOnSuccess=true and RunsOnFailure=false
1524 Add a regression script to test RunScript
1526 kes Correct usage of MTIOCLRERR ioctl for clearing persistant errors
1529 kes The bgnome-console (gnome-console) and bwx-console (wx-console) are
1530 deprecated. No additional bugs will be fixed, and they will be dropped
1531 in a future release (probably 2.4.0).
1532 kes Change name of wx-console to bwx-console to make it more Bacula
1534 kes Change the name of gnome-console to bgnome-console to make it
1537 kes Some time in March, a Feature Request with patch from Jorj Bauer
1538 <jorj@seas.upenn.edu> was committed by Landon (with my approval).
1540 The ability for the director to validate a Client (FD) CN against
1541 an arbitrary set of patterns rather than the hostname, with
1542 A new 'TLS Allowed CN' set of directives which are implemented
1543 in the Client resource. Then pattern matching is used in place
1544 of hostname matching against the Certificate's CN. As an example, we
1545 have certificates which (a) use a local CA, and (b) have a CN of the
1547 kes Add new/changed entry points to Win32 build
1548 kes Create unaccepted-projects for projects that are not accepted.
1549 kes Simplify locking in the reservations system.
1550 kes Add more debug code in reservations.
1551 kes Make sure error condition on reserving a volume is handled correctly.
1552 kes Correct handling of volume_in_use.
1553 kes Correct handling of initializing a device.
1554 kes Move handling of broadcasting releasing a device into release_device().
1555 kes Correct attaching dcr to dev so that it is only done if device
1556 is properly initiated.
1558 kes Locking debug level tweaks in SD.
1559 kes Tweak new Volume code.
1561 kes Add exec external-command [wait-seconds] to bconsole. This
1562 executes the external-command. Note! normally external-command
1563 should be enclosed in double quotes.
1564 kes Turn the .die command on only if DEVELOPER is defined -- i.e.
1565 it should normally be off in a production system.
1567 kes Implement die command for SD so that we can force it to dump.
1568 kes Implement SD lock debug code.
1569 kes Implement new algorithm for keeping Volume list in SD. It
1570 is now owned by the device.
1572 kes Implement new code for freeing in use volumes that should
1573 resolve if not all, some of the problems of multiple drive
1574 tape conflicts described in bug 801.
1576 kes Fix gui/bacula-web/images files in svn.
1577 kes Turn on FreeBSD/OpenBSD code to set EOT model on tape.
1579 ebl Fix a bug in batch mode (in string escape)
1580 kes Correct migration prune SQL typo that crept in in a
1581 recent 2.1.x change.
1583 kes Move bnet_despool() into class in bsock.c
1584 kes Modify job report to include director name and Build OS.
1585 kes Move drop root privilege and check_catalog() before fork.
1586 kes Add update database scripts (version 9 to 10) to updatedb directory.
1588 ebl Check size and age of each file after its backup to see if
1589 it has changed during backup, if 'checkfilechanges' is set.
1590 The FD will do an extra check (stat(2)) after
1591 each file backup. mtime, ctime and size are compared with
1592 'before backup' information. If time or size mismatch, an
1593 error message will be generated. You must upgrade FD to use it.
1595 kes Make database name and user configurable
1596 --with-db-name=xxx --with-db-user=xxx
1597 kes Add back database type to message.c for debugging.
1599 kes Implement dir_sql() which issues an SQL query.
1600 kes Modify bat medialist to use dir_sql() and do some minor C++
1601 formatting as well as eliminating a number of pointers, simplifing
1604 kes Fix some of the mtx-changer grep commands for tape label readers.
1605 kes Convert a number of bsendmsg into the appropriate send/warning/error
1606 message class calls.
1607 kes Suppress the using database message in the .sql command.
1608 kes Correct an incorrect bnet_tls_client prototype -- patch from Martin.
1610 kes Add context menu for floating a window.
1611 kes Some minor cleanup and name changes in qt-console
1612 kes Add doing mt setblk 0 in Win32 mtx-changer.
1613 kes Apply Martin's bug fix to move definition of ENODATA for
1615 ebl Add a BUSY handler to sqlite to be able to use multi_db = 1 with
1616 sqlite2 and sqlite3.
1618 kes More pruning cleanup.
1619 kes Turn on wait_for_drive by default in mtx-changer.
1620 kes Turn on Batch insert code by default as it now passes regression.
1621 kes Add ./configure --enable-bat to enable building of Bat.
1622 No install yet though.
1624 kes Implement a new .sql command for bat.
1625 kes Implement code to turn off pruning in obtaining the next volume.
1626 Pruning is turned off for the status dir command, but turned on
1627 for SD requests and for the list nextvolume command.
1629 kes Correct Qmsg() that was not updated correctly when committing a
1630 previous change (probably the recent TLS patch).
1632 kes Write new subroutine is_volume_purged() that explicitly checks
1633 if the Volume is purged, and if so marks it as such. This should
1634 resolve problems reported about needing to mount twice to recycle
1636 kes Rewrite pruning algorithm to do more work in the SQL engine, and
1637 to pass a list of JobIds to be deleted to SQL. Also, minimize the
1638 amount of duplicated code.
1639 kes Do volume pruning only for the Media Type desired (reduces pruning time
1640 if multiple Media Types are in the same pool).
1641 kes Implement more detailed info in the Job report for the Bacula version
1643 kes Switch from POOLMEM to POOL_MEM (a real class) in ua_prune.c and
1645 ebl Add bbatch tool to bench database and insert mode.
1646 Fix sql quote stuff in batch mode
1647 Fix sql stuff for mysql
1649 kes Correct problems with am/pm scheduling. Fixes bug #808.
1650 kes Implement new prunning code that prunes up to 1000 jobs at
1651 the same time. The same technique can be applied to a number
1652 of other prune/purge subroutines.
1653 kes Add an insanity check when starting a new tape job to ensure
1654 that the tape position has not been changed. If so fail the
1656 kes Fix Win32 build for dlls to add the folllowing:
1657 src/lib/bsock.c -- new file with new entry points
1658 src/lib/dlist.c -- new entry points
1659 src/cats/sql_create.c -- new entry point
1660 src/cats/sql_cmds.c -- new DATA item exported
1662 ebl batch mode cleanup bscan-test is ok now.
1663 kes Implement SD code to check length of disk volume before appending.
1665 kes Correct return status on db_batch... routines.
1666 kes Add call to db_write_batch_file_records() to migration code.
1667 ebl Fix AfterJob timing
1668 kes Move the checking of the database in initializion of the Director
1669 to after we drop privileges. This avoids the need for both root
1670 and bacula access to the DB.
1671 kes Correct a misplaced variable definition in src/filed/backup.c
1672 kes Correct how the new batch insert db_create_attributes_record()
1673 uses the arguments. Caused a seg fault in bscan.
1674 kes Implement lock() and unlock() methods in DEVICE class.
1675 Implement block() and set_block(xx) methods in DEVICE class.
1676 kes Modify bnet_connect() so that it uses time() to check for the
1677 wait time expiring (on some OSes, some system calls may not
1678 return immediately).
1679 kes Modify Verify to obtain the previous JobId when it is actually
1680 running rather than at schedule time (as it was in 1.38.x).
1681 kes Fix src/job.c to handle MaxWaitTime correctly. This should
1683 kes When checking pid in pid file, continue running if the pid is
1684 the same as ours. This occurs on IRIX after a system crash.
1687 kes Extend new GUI API.
1688 kes Make the ua structure a class, and implement send_msg(),
1689 error_msg(), warning_msg(), and info_msg().
1691 kes Apply fix from for building wx-console on the Mac from
1693 kes Implement new select mechanism for GUI programs.
1694 kes Reorganize initialization of stackedWidgets in bat.
1696 kes Add updated nagios plugin supplied by Christian Masopust.
1698 kes More bat implementation.
1699 kes File migrate bug with Pool Occupancy using mediaid instead
1700 of jobids. Fixes bug #795.
1701 kes Fix orphaned buffers in filed backup and verify due to
1702 crypto buffers not freed during errors. Fixes bug #789.
1703 kes Extend new GUI api code to tree commands.
1704 kes Ensure that tree and dot commands check console ACLs.
1705 kes Permit marking directory with trailing slash.
1706 kes Allow 20 console connections (instead of only 10).
1708 kes Add smartctl call to bacula-sd.conf as an example of getting
1711 kes Modify jobq.c to let simultaneous restore jobs run. This may
1712 cause them to fail if they cannot get a drive.
1713 kes Add Client Connect Wait to Storage daemon to permit users to
1714 modify the time the SD waits for a FD connection.
1716 kes Correct virtual changer check which was backwards. This caused
1717 volumes to be unloaded into slots already occupied.
1719 kes Apply Command ACL filter to JobId list in restore command.
1720 kes Correct typeo in var.c patch.
1722 kes Don't let Bacula prune File or Job records for the current Job.
1723 kes Fix variable substitution pad + inc bug reported (with patch)
1726 kes Correct SQLite log table index as reported by Luca Berra.
1728 ebl fix fifo stuff, bacula tries to rewind the fifo... Thanks to Andreas
1730 kes Begin implementing new comm signals for API.
1731 kes Fix a few places in lib/message.c where the open fd may
1733 kes Continue implementing lib/bsock.c (real class). Make jcr,
1734 who, host, and port private. There are new methods to access
1735 them for non-class use. This required touching a number of files.
1737 kes Add LANG=C to autoconf/randpass so it works with languages other
1738 than English. Fixes bug #788.
1740 ebl Revert ClientRunBeforeJob to old position as in 1.38.X.
1742 You will not be able to generate Include/Exclude list any more.
1743 It will be fixed soon.
1744 If you want to use this, you can apply
1745 trunk/bacula/patches/testing/clientrunbeforejob_can_generate_include_exclude_list.patch
1747 kes Restore of sockets created false error messages because Bacula
1748 no longer restores sockets, but the code was still trying to
1749 set the attributes on a non-existent file. Reported by a user.
1750 ebl finish RecyclePool feature
1751 Media will takes Pool.RecyclePool
1752 when moving from Scratch to a Pool or when user will do
1753 update volume=xxx frompool
1754 To use it, add RecyclePool = aPool to your Pool resource
1757 RecyclePool = Scratch
1761 kes Expand new BSOCK class adding signal() and new BNET signals.
1762 kes Begin enhancing the dot commands adding a new API function
1763 that returns more information and will make it easier
1764 to interface to the Director from a program.
1766 kes Make DEVICE fd private. Its new name is m_fd, and can be
1767 obtained with dev->fd() outside the class. This is the
1768 first of many DEVICE members to be made private.
1769 kes Implement Michael Renner's idea on having a virtual disk
1770 changer. I made some minor modifications (e.g. I did not
1771 implement the Virtual Changer directive, but simply set
1772 the Changer Command to an empty string.
1774 kes Implement a BSOCK send() method that writes the whole record
1775 in a single write() request rather than in two.
1776 ebl add update volume=xxx recyclepool=yyyy
1777 volume takes recyclepool from pool when using update volume=xxx from pool
1779 kes Fix encryption deblocking bug, which caused some restored files
1780 to be truncated. This fixes bug #763.
1781 kes Add FD event sequence order prepared by Eric -- for RunScripts.
1782 kes Fix 12am/pm bug as reported in bug #782 -- scheduler problem.
1784 kes Apply Eric's ClientRunScriptAfter patch to 2.0 and 2.1.
1785 ebl Use btime_t instead of uint64_t in media patch.
1787 kes Optimize the use of the database a bit in the Status dir command.
1788 Only open it when needed, ensure that if any previous database
1789 was opened, it is closed.
1791 kes Correct VolCatBytes bug from media patch.
1792 kes Apply patch from bug #612 by Rudolf Cejka to speedup pruning
1793 in the case of orphaned records.
1794 kes Modify dbcheck to handle orphaned JobMedia, Path, Filename,
1795 and File records in 300K chunks to be more efficient. This
1796 idea came from Juan Luis Frances (if I remember right).
1797 kes Apply Eric's scratch patch that moves a purged Volume to
1798 the RecyclePool. Question: how is RecyclePool set? what
1799 happens to the ScratchPool?
1800 kes Apply Eric's media patch that collects read/write media
1801 times as well as byte counts. This patch requires a
1802 simultaneous upgrade of the DIR and SD. Note, there
1803 should be some way to turn off timing. I'm not sure
1804 times are in Bacula units.
1805 kes Apply Eric's batch-insert patch.
1807 kes Update projects list.
1809 kes Implement Include/Exclude file lists in FD as dlists using
1810 the new dlistString class. This permits efficiently having
1811 large include/exclude lists and completes project Item 25.
1812 kes Fix dird/ua_cmds.c so that a cancel command checks if the
1813 console is authorized to cancel the job. This fixes bug
1815 kes Modify SD so that the VolCatJobs medium record is updated
1816 at the beginning of a Job rather than the end. This
1817 fixes bug #775 where exceeding MaxVolJobs caused jobs
1819 kes Added a mutex around getting and setting Volume information
1820 so that multiple simultaneous jobs will single thread.
1822 Switch to using Subversion
1823 kes Remove src/pygtk-console/ from configure
1825 kes Delete src/lib/btree.c from win32 build, then add rblist.c
1826 plus the entrypoints.
1827 kes Apply patch supplied that corrects debug print
1828 in canceling jobs for max run time. Supplied as
1829 part of bug #621, which was previously fixed.
1831 kes Test on job_canceled() and sd_msg_thread_done inside
1832 loop starting the message thread to avoid a race condition.
1834 kes Remove rl_catch_signal from console.c as it conflicted
1835 with the header definition. Fixes bug #765.
1836 ebl Fixes bug #766 about RunsOnClient = Yes (case sensitive)
1838 kes Clarify some stored/acquire messages to indicate if the
1839 problem is with read or append.
1841 kes Fix memory leak with storage ids in cats/sql_get.c
1842 kes Terminate watchdog earlier to avoid reference to released
1843 memory -- reported by Jason Austin.
1844 kes Move closing the database from jobq.c to the director daemon
1845 termination routine. This fixes memory leaks for shadow jobs
1846 (i.e. migration jobs).
1847 kes Free up the unique jobid chain items in migrate.c. This fixes
1848 a memory leak problem.
1849 kes Convert some ugly looking for statements to use foreach_alist
1850 in findlib/find.c. This will facilitate converting the structures
1851 to use dlist (for large include/exclude lists).
1852 kes Fix a bug in the btree.c and btree.h routines, then rename them
1853 rblist and add them to be built in src/lib. Include some new
1854 methods written by Rudolf Cejka that make the code more readable
1855 (hides some of the ugly casting).
1856 kes Add set_next() and set_prev() methods which make the code much more
1857 readable. Also add a new dlistString class that facilitates storing
1858 strings in dlists. To be used in the large include/exclude lists.
1859 kes Make some trivial modifications to lib/tree.h that use rblist
1860 rather than dlist for storing the tree links. This was suggested
1861 by Rudolf Cejka. The result of this is that the restore tree now
1862 uses red-black binary trees rather than simple linked lists. This
1863 should give rather dramatic speed improvements for directories
1864 contining large numbers of directories/files (more than 10000).
1866 kes Fix maxruntime bug #621.
1868 ebl Implement the include JobID in spool file name project.
1869 kes Reorder projects file in order determined by Jan 2007 vote.
1870 kes Implement item #12 on project list -- quick release of FD by
1872 kes Fix open of SQLite3 db where user does not have write permission
1873 so that DIR does not crash. Fixes bug #761.
1875 kes Add back missing @ in Win32 Makefile.
1876 kes Change 'Device not configured to autolabel' from INFO
1878 kes Fix jobq.c to restart failed jobs when Reschedule Times = 0
1879 which should restart an indefinite # of times.
1880 kes Fix configure --help to print --with-mysql[=DIR]. Same for
1881 other DIR specifications.
1883 rn Fix msvc build problems. Fix bacula.dll exports for msvc build.
1884 Fix path quoting in SQLite scripts.
1885 Fix problems with SHGetFolderPath.
1887 kes Create patches/2.0.1-restart.patch. Fixes bug #755.
1889 kes Fix Job restart on error bug that promotes an Inc to a Full
1890 backup. This should fix bug #755.
1891 kes Add qt-console and first cut of code.
1895 kes Fix Bacula->Documentation link on Win32 to point to index.html
1896 instead of bacula.html. Fixed bug #750.
1897 kes Return JobId in db_get_job_record() when JobId==0. This should
1899 kes Do not release source pointers when restarting a failed job.
1901 kes Add dynamic dll entry point for SHGetFolderPath to Win32 code.
1902 This *should* fix bug #747.
1903 kes Modify winbacula.nsi to substitute with g bin_dir_cmd. Should fix
1906 kes Modify USTORE constructor to set an empty store_source string,
1907 and don't copy the store_source string in a cancel. Hopefully
1908 this will fix Arno's seg fault, bug #744.
1909 kes Add back code to disable conio in configure. Fixes bug #743.
1910 kes Correct the Options scanner in the FD to correctly handle
1911 SHA1 option, which was eating the next option. Reported by
1913 kes Add code to indicate when the SD is spooling, spool wait, and
1914 despooling as requested by Alan Brown.
1916 Version 2.0.0 released: 4 January 2007