git.sur5r.net Git - u-boot/blob - board/engicam/geam6ul/geam6ul.c

   1 /*
   2  * Copyright (C) 2016 Amarula Solutions B.V.
   3  * Copyright (C) 2016 Engicam S.r.l.
   4  * Author: Jagan Teki <jagan@amarulasolutions.com>
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #include <common.h>
  10 #include <mmc.h>
  11
  12 #include <asm/io.h>
  13 #include <asm/gpio.h>
  14 #include <linux/sizes.h>
  15
  16 #include <asm/arch/clock.h>
  17 #include <asm/arch/crm_regs.h>
  18 #include <asm/arch/iomux.h>
  19 #include <asm/arch/mx6-pins.h>
  20 #include <asm/arch/sys_proto.h>
  21 #include <asm/imx-common/iomux-v3.h>
  22
  23 DECLARE_GLOBAL_DATA_PTR;
  24
  25 #ifdef CONFIG_NAND_MXS
  26
  27 #define GPMI_PAD_CTRL0          (PAD_CTL_PKE | PAD_CTL_PUE | PAD_CTL_PUS_100K_UP)
  28 #define GPMI_PAD_CTRL1          (PAD_CTL_DSE_40ohm | PAD_CTL_SPEED_MED | \
  29                                 PAD_CTL_SRE_FAST)
  30 #define GPMI_PAD_CTRL2          (GPMI_PAD_CTRL0 | GPMI_PAD_CTRL1)
  31
  32 static iomux_v3_cfg_t const nand_pads[] = {
  33         IOMUX_PADS(PAD_NAND_DATA00__RAWNAND_DATA00 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
  34         IOMUX_PADS(PAD_NAND_DATA01__RAWNAND_DATA01 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
  35         IOMUX_PADS(PAD_NAND_DATA02__RAWNAND_DATA02 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
  36         IOMUX_PADS(PAD_NAND_DATA03__RAWNAND_DATA03 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
  37         IOMUX_PADS(PAD_NAND_DATA04__RAWNAND_DATA04 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
  38         IOMUX_PADS(PAD_NAND_DATA05__RAWNAND_DATA05 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
  39         IOMUX_PADS(PAD_NAND_DATA06__RAWNAND_DATA06 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
  40         IOMUX_PADS(PAD_NAND_DATA07__RAWNAND_DATA07 | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
  41         IOMUX_PADS(PAD_NAND_CLE__RAWNAND_CLE | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
  42         IOMUX_PADS(PAD_NAND_ALE__RAWNAND_ALE | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
  43         IOMUX_PADS(PAD_NAND_CE0_B__RAWNAND_CE0_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
  44         IOMUX_PADS(PAD_NAND_RE_B__RAWNAND_RE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
  45         IOMUX_PADS(PAD_NAND_WE_B__RAWNAND_WE_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
  46         IOMUX_PADS(PAD_NAND_WP_B__RAWNAND_WP_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
  47         IOMUX_PADS(PAD_NAND_READY_B__RAWNAND_READY_B | MUX_PAD_CTRL(GPMI_PAD_CTRL2)),
  48 };
  49
  50 static void setup_gpmi_nand(void)
  51 {
  52         struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
  53
  54         /* config gpmi nand iomux */
  55         SETUP_IOMUX_PADS(nand_pads);
  56
  57         clrbits_le32(&mxc_ccm->CCGR4,
  58                      MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
  59                      MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
  60                      MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
  61                      MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
  62                      MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK);
  63
  64         /*
  65          * config gpmi and bch clock to 100 MHz
  66          * bch/gpmi select PLL2 PFD2 400M
  67          * 100M = 400M / 4
  68          */
  69         clrbits_le32(&mxc_ccm->cscmr1,
  70                      MXC_CCM_CSCMR1_BCH_CLK_SEL |
  71                      MXC_CCM_CSCMR1_GPMI_CLK_SEL);
  72         clrsetbits_le32(&mxc_ccm->cscdr1,
  73                         MXC_CCM_CSCDR1_BCH_PODF_MASK |
  74                         MXC_CCM_CSCDR1_GPMI_PODF_MASK,
  75                         (3 << MXC_CCM_CSCDR1_BCH_PODF_OFFSET) |
  76                         (3 << MXC_CCM_CSCDR1_GPMI_PODF_OFFSET));
  77
  78         /* enable gpmi and bch clock gating */
  79         setbits_le32(&mxc_ccm->CCGR4,
  80                      MXC_CCM_CCGR4_RAWNAND_U_BCH_INPUT_APB_MASK |
  81                      MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_BCH_MASK |
  82                      MXC_CCM_CCGR4_RAWNAND_U_GPMI_BCH_INPUT_GPMI_IO_MASK |
  83                      MXC_CCM_CCGR4_RAWNAND_U_GPMI_INPUT_APB_MASK |
  84                      MXC_CCM_CCGR4_PL301_MX6QPER1_BCH_MASK);
  85
  86         /* enable apbh clock gating */
  87         setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK);
  88 }
  89 #endif /* CONFIG_NAND_MXS */
  90
  91 #ifdef CONFIG_ENV_IS_IN_MMC
  92 static void mmc_late_init(void)
  93 {
  94         char cmd[32];
  95         char mmcblk[32];
  96         u32 dev_no = mmc_get_env_dev();
  97
  98         setenv_ulong("mmcdev", dev_no);
  99
 100         /* Set mmcblk env */
 101         sprintf(mmcblk, "/dev/mmcblk%dp2 rootwait rw", dev_no);
 102         setenv("mmcroot", mmcblk);
 103
 104         sprintf(cmd, "mmc dev %d", dev_no);
 105         run_command(cmd, 0);
 106 }
 107 #endif
 108
 109 int board_late_init(void)
 110 {
 111         switch ((imx6_src_get_boot_mode() & IMX6_BMODE_MASK) >>
 112                         IMX6_BMODE_SHIFT) {
 113         case IMX6_BMODE_SD:
 114         case IMX6_BMODE_ESD:
 115 #ifdef CONFIG_ENV_IS_IN_MMC
 116                 mmc_late_init();
 117 #endif
 118                 setenv("modeboot", "mmcboot");
 119                 break;
 120         case IMX6_BMODE_NAND:
 121                 setenv("modeboot", "nandboot");
 122                 break;
 123         default:
 124                 setenv("modeboot", "");
 125                 break;
 126         }
 127
 128         if (is_mx6ul())
 129                 setenv("fdt_file", "imx6ul-geam-kit.dtb");
 130
 131         return 0;
 132 }
 133
 134 int board_init(void)
 135 {
 136         /* Address of boot parameters */
 137         gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 138
 139 #ifdef CONFIG_NAND_MXS
 140         setup_gpmi_nand();
 141 #endif
 142
 143         return 0;
 144 }
 145
 146 int dram_init(void)
 147 {
 148         gd->ram_size = imx_ddr_size();
 149
 150         return 0;
 151 }
 152
 153 #ifdef CONFIG_SPL_BUILD
 154 #include <libfdt.h>
 155 #include <spl.h>
 156
 157 #include <asm/arch/crm_regs.h>
 158 #include <asm/arch/mx6-ddr.h>
 159
 160 #define UART_PAD_CTRL  (PAD_CTL_PKE | PAD_CTL_PUE |             \
 161         PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED |               \
 162         PAD_CTL_DSE_40ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
 163
 164 static iomux_v3_cfg_t const uart1_pads[] = {
 165         IOMUX_PADS(PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL)),
 166         IOMUX_PADS(PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL)),
 167 };
 168
 169 /* MMC board initialization is needed till adding DM support in SPL */
 170 #if defined(CONFIG_FSL_ESDHC) && !defined(CONFIG_DM_MMC)
 171 #include <mmc.h>
 172 #include <fsl_esdhc.h>
 173
 174 #define USDHC_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE |             \
 175         PAD_CTL_PUS_22K_UP  | PAD_CTL_SPEED_LOW |               \
 176         PAD_CTL_DSE_80ohm   | PAD_CTL_SRE_FAST  | PAD_CTL_HYS)
 177
 178 static iomux_v3_cfg_t const usdhc1_pads[] = {
 179         IOMUX_PADS(PAD_SD1_CLK__USDHC1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 180         IOMUX_PADS(PAD_SD1_CMD__USDHC1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 181         IOMUX_PADS(PAD_SD1_DATA0__USDHC1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 182         IOMUX_PADS(PAD_SD1_DATA1__USDHC1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 183         IOMUX_PADS(PAD_SD1_DATA2__USDHC1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 184         IOMUX_PADS(PAD_SD1_DATA3__USDHC1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 185
 186         /* VSELECT */
 187         IOMUX_PADS(PAD_GPIO1_IO05__USDHC1_VSELECT | MUX_PAD_CTRL(USDHC_PAD_CTRL)),
 188         /* CD */
 189         IOMUX_PADS(PAD_UART1_RTS_B__GPIO1_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 190         /* RST_B */
 191         IOMUX_PADS(PAD_GPIO1_IO09__GPIO1_IO09 | MUX_PAD_CTRL(NO_PAD_CTRL)),
 192 };
 193
 194 #define USDHC1_CD_GPIO  IMX_GPIO_NR(1, 1)
 195
 196 struct fsl_esdhc_cfg usdhc_cfg[1] = {
 197         {USDHC1_BASE_ADDR, 0, 4},
 198 };
 199
 200 int board_mmc_getcd(struct mmc *mmc)
 201 {
 202         struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
 203         int ret = 0;
 204
 205         switch (cfg->esdhc_base) {
 206         case USDHC1_BASE_ADDR:
 207                 ret = !gpio_get_value(USDHC1_CD_GPIO);
 208                 break;
 209         }
 210
 211         return ret;
 212 }
 213
 214 int board_mmc_init(bd_t *bis)
 215 {
 216         int i, ret;
 217
 218         /*
 219         * According to the board_mmc_init() the following map is done:
 220         * (U-boot device node)    (Physical Port)
 221         * mmc0                          USDHC1
 222         */
 223         for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
 224                 switch (i) {
 225                 case 0:
 226                         SETUP_IOMUX_PADS(usdhc1_pads);
 227                         gpio_direction_input(USDHC1_CD_GPIO);
 228                         usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK);
 229                         break;
 230                 default:
 231                         printf("Warning - USDHC%d controller not supporting\n",
 232                                i + 1);
 233                         return 0;
 234                 }
 235
 236                 ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
 237                 if (ret) {
 238                         printf("Warning: failed to initialize mmc dev %d\n", i);
 239                         return ret;
 240                 }
 241         }
 242
 243         return 0;
 244 }
 245 #endif /* CONFIG_FSL_ESDHC */
 246
 247 static struct mx6ul_iomux_grp_regs mx6_grp_ioregs = {
 248         .grp_addds = 0x00000030,
 249         .grp_ddrmode_ctl = 0x00020000,
 250         .grp_b0ds = 0x00000030,
 251         .grp_ctlds = 0x00000030,
 252         .grp_b1ds = 0x00000030,
 253         .grp_ddrpke = 0x00000000,
 254         .grp_ddrmode = 0x00020000,
 255         .grp_ddr_type = 0x000c0000,
 256 };
 257
 258 static struct mx6ul_iomux_ddr_regs mx6_ddr_ioregs = {
 259         .dram_dqm0 = 0x00000030,
 260         .dram_dqm1 = 0x00000030,
 261         .dram_ras = 0x00000030,
 262         .dram_cas = 0x00000030,
 263         .dram_odt0 = 0x00000030,
 264         .dram_odt1 = 0x00000030,
 265         .dram_sdba2 = 0x00000000,
 266         .dram_sdclk_0 = 0x00000008,
 267         .dram_sdqs0 = 0x00000038,
 268         .dram_sdqs1 = 0x00000030,
 269         .dram_reset = 0x00000030,
 270 };
 271
 272 static struct mx6_mmdc_calibration mx6_mmcd_calib = {
 273         .p0_mpwldectrl0 = 0x00070007,
 274         .p0_mpdgctrl0 = 0x41490145,
 275         .p0_mprddlctl = 0x40404546,
 276         .p0_mpwrdlctl = 0x4040524D,
 277 };
 278
 279 struct mx6_ddr_sysinfo ddr_sysinfo = {
 280         .dsize = 0,
 281         .cs_density = 20,
 282         .ncs = 1,
 283         .cs1_mirror = 0,
 284         .rtt_wr = 2,
 285         .rtt_nom = 1,           /* RTT_Nom = RZQ/2 */
 286         .walat = 1,             /* Write additional latency */
 287         .ralat = 5,             /* Read additional latency */
 288         .mif3_mode = 3,         /* Command prediction working mode */
 289         .bi_on = 1,             /* Bank interleaving enabled */
 290         .sde_to_rst = 0x10,     /* 14 cycles, 200us (JEDEC default) */
 291         .rst_to_cke = 0x23,     /* 33 cycles, 500us (JEDEC default) */
 292         .ddr_type = DDR_TYPE_DDR3,
 293 };
 294
 295 static struct mx6_ddr3_cfg mem_ddr = {
 296         .mem_speed = 800,
 297         .density = 4,
 298         .width = 16,
 299         .banks = 8,
 300         .rowaddr = 13,
 301         .coladdr = 10,
 302         .pagesz = 2,
 303         .trcd = 1375,
 304         .trcmin = 4875,
 305         .trasmin = 3500,
 306 };
 307
 308 static void ccgr_init(void)
 309 {
 310         struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
 311
 312         writel(0xFFFFFFFF, &ccm->CCGR0);
 313         writel(0xFFFFFFFF, &ccm->CCGR1);
 314         writel(0xFFFFFFFF, &ccm->CCGR2);
 315         writel(0xFFFFFFFF, &ccm->CCGR3);
 316         writel(0xFFFFFFFF, &ccm->CCGR4);
 317         writel(0xFFFFFFFF, &ccm->CCGR5);
 318         writel(0xFFFFFFFF, &ccm->CCGR6);
 319         writel(0xFFFFFFFF, &ccm->CCGR7);
 320 }
 321
 322 static void spl_dram_init(void)
 323 {
 324         mx6ul_dram_iocfg(mem_ddr.width, &mx6_ddr_ioregs, &mx6_grp_ioregs);
 325         mx6_dram_cfg(&ddr_sysinfo, &mx6_mmcd_calib, &mem_ddr);
 326 }
 327
 328 void board_init_f(ulong dummy)
 329 {
 330         /* setup AIPS and disable watchdog */
 331         arch_cpu_init();
 332
 333         ccgr_init();
 334
 335         /* iomux and setup of i2c */
 336         SETUP_IOMUX_PADS(uart1_pads);
 337
 338         /* setup GP timer */
 339         timer_init();
 340
 341         /* UART clocks enabled and gd valid - init serial console */
 342         preloader_console_init();
 343
 344         /* DDR initialization */
 345         spl_dram_init();
 346
 347         /* Clear the BSS. */
 348         memset(__bss_start, 0, __bss_end - __bss_start);
 349
 350         /* load/boot image from boot device */
 351         board_init_r(NULL, 0);
 352 }
 353 #endif /* CONFIG_SPL_BUILD */