2 * (C) Copyright 2007-2008
3 * Stelian Pop <stelian@popies.net>
4 * Lead Tech Design <www.leadtechdesign.com>
5 * Ilko Iliev <www.ronetix.at>
7 * (C) Copyright 2009-2011
8 * Eric Benard <eric@eukrea.com>
10 * SPDX-License-Identifier: GPL-2.0+
15 #include <asm/arch/at91sam9260.h>
16 #include <asm/arch/at91sam9_smc.h>
17 #include <asm/arch/at91_common.h>
18 #include <asm/arch/at91_matrix.h>
19 #include <asm/arch/at91_pmc.h>
20 #include <asm/arch/at91_pio.h>
21 #include <asm/arch/clk.h>
22 #include <asm/arch/hardware.h>
23 #if defined(CONFIG_RESET_PHY_R) && defined(CONFIG_MACB)
28 DECLARE_GLOBAL_DATA_PTR;
30 /* ------------------------------------------------------------------------- */
32 * Miscelaneous platform dependent initialisations
35 #ifdef CONFIG_CMD_NAND
36 static void cpu9260_nand_hw_init(void)
39 at91_smc_t *smc = (at91_smc_t *) ATMEL_BASE_SMC;
40 at91_matrix_t *matrix = (at91_matrix_t *) ATMEL_BASE_MATRIX;
41 at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
44 csa = readl(&matrix->csa) | AT91_MATRIX_CSA_EBI_CS3A;
45 writel(csa, &matrix->csa);
47 /* Configure SMC CS3 for NAND/SmartMedia */
48 #if defined(CONFIG_CPU9G20)
49 writel(AT91_SMC_SETUP_NWE(2) | AT91_SMC_SETUP_NCS_WR(0) |
50 AT91_SMC_SETUP_NRD(2) | AT91_SMC_SETUP_NCS_RD(0),
52 writel(AT91_SMC_PULSE_NWE(4) | AT91_SMC_PULSE_NCS_WR(4) |
53 AT91_SMC_PULSE_NRD(4) | AT91_SMC_PULSE_NCS_RD(4),
55 writel(AT91_SMC_CYCLE_NWE(7) | AT91_SMC_CYCLE_NRD(7),
57 writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
58 AT91_SMC_MODE_EXNW_DISABLE |
60 AT91_SMC_MODE_TDF_CYCLE(3),
62 #elif defined(CONFIG_CPU9260)
63 writel(AT91_SMC_SETUP_NWE(1) | AT91_SMC_SETUP_NCS_WR(0) |
64 AT91_SMC_SETUP_NRD(1) | AT91_SMC_SETUP_NCS_RD(0),
66 writel(AT91_SMC_PULSE_NWE(3) | AT91_SMC_PULSE_NCS_WR(3) |
67 AT91_SMC_PULSE_NRD(3) | AT91_SMC_PULSE_NCS_RD(3),
69 writel(AT91_SMC_CYCLE_NWE(5) | AT91_SMC_CYCLE_NRD(5),
71 writel(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |
72 AT91_SMC_MODE_EXNW_DISABLE |
74 AT91_SMC_MODE_TDF_CYCLE(2),
78 writel(1 << ATMEL_ID_PIOC, &pmc->pcer);
80 /* Configure RDY/BSY */
81 at91_set_pio_input(CONFIG_SYS_NAND_READY_PIN, 1);
83 /* Enable NandFlash */
84 at91_set_pio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1);
89 static void cpu9260_macb_hw_init(void)
91 at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
94 writel(1 << ATMEL_ID_EMAC0, &pmc->pcer);
96 at91_set_pio_pullup(AT91_PIO_PORTA, 17, 1);
104 int board_early_init_f(void)
106 at91_pmc_t *pmc = (at91_pmc_t *) ATMEL_BASE_PMC;
108 writel((1 << ATMEL_ID_PIOA) |
109 (1 << ATMEL_ID_PIOB) |
110 (1 << ATMEL_ID_PIOC),
113 at91_seriald_hw_init();
121 /* arch number of the board */
122 #if defined(CONFIG_CPU9G20)
123 gd->bd->bi_arch_number = MACH_TYPE_CPUAT9G20;
124 #elif defined(CONFIG_CPU9260)
125 gd->bd->bi_arch_number = MACH_TYPE_CPUAT9260;
128 /* adress of boot parameters */
129 gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
131 #ifdef CONFIG_CMD_NAND
132 cpu9260_nand_hw_init();
135 cpu9260_macb_hw_init();
137 #if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
138 status_led_set(STATUS_LED_BOOT, STATUS_LED_ON);
145 gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE,
146 CONFIG_SYS_SDRAM_SIZE);
150 int board_eth_init(bd_t *bis)
154 rc = macb_eth_initialize(0, (void *)ATMEL_BASE_EMAC0, 0);