2 * Copyright 2004, 2007, 2009-2010 Freescale Semiconductor, Inc.
4 * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
6 * See file CREDITS for list of people who contributed to this
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of
12 * the License, or (at your option) any later version.
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
27 #include <asm/processor.h>
29 #include <asm/immap_85xx.h>
30 #include <asm/fsl_pci.h>
31 #include <asm/fsl_ddr_sdram.h>
32 #include <spd_sdram.h>
35 #include <fdt_support.h>
37 #include "../common/cadmus.h"
38 #include "../common/eeprom.h"
39 #include "../common/via.h"
41 DECLARE_GLOBAL_DATA_PTR;
43 void local_bus_init(void);
44 void sdram_init(void);
48 volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
49 volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
51 /* PCI slot in USER bits CSR[6:7] by convention. */
52 uint pci_slot = get_pci_slot ();
54 uint cpu_board_rev = get_cpu_board_revision ();
56 printf ("Board: CDS Version 0x%02x, PCI Slot %d\n",
57 get_board_version (), pci_slot);
59 printf ("CPU Board Revision %d.%d (0x%04x)\n",
60 MPC85XX_CPU_BOARD_MAJOR (cpu_board_rev),
61 MPC85XX_CPU_BOARD_MINOR (cpu_board_rev), cpu_board_rev);
63 * Initialize local bus.
68 * Hack TSEC 3 and 4 IO voltages.
70 gur->tsec34ioovcr = 0xe7e0; /* 1110 0111 1110 0xxx */
72 ecm->eedr = 0xffffffff; /* clear ecm errors */
73 ecm->eeer = 0xffffffff; /* enable ecm errors */
78 initdram(int board_type)
82 puts("Initializing\n");
84 #if defined(CONFIG_DDR_DLL)
87 * Work around to stabilize DDR DLL MSYNC_IN.
88 * Errata DDR9 seems to have been fixed.
89 * This is now the workaround for Errata DDR11:
90 * Override DLL = 1, Course Adj = 1, Tap Select = 0
93 volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
95 gur->ddrdllcr = 0x81000000;
96 asm("sync;isync;msync");
101 dram_size = fsl_ddr_sdram();
102 dram_size = setup_ddr_tlbs(dram_size / 0x100000);
103 dram_size *= 0x100000;
106 * SDRAM Initialization
115 * Initialize Local Bus
120 volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
121 volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
127 get_sys_info(&sysinfo);
128 clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2;
129 lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
131 gur->lbiuiplldcr1 = 0x00078080;
133 gur->lbiuiplldcr0 = 0x7c0f1bf0;
134 } else if (clkdiv == 8) {
135 gur->lbiuiplldcr0 = 0x6c0f1bf0;
136 } else if (clkdiv == 4) {
137 gur->lbiuiplldcr0 = 0x5c0f1bf0;
140 lbc->lcrr |= 0x00030000;
142 asm("sync;isync;msync");
144 lbc->ltesr = 0xffffffff; /* Clear LBC error interrupts */
145 lbc->lteir = 0xffffffff; /* Enable LBC error interrupts */
149 * Initialize SDRAM memory on the Local Bus.
154 #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
157 volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
158 uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
164 print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
167 * Setup SDRAM Base and Option Registers
169 set_lbc_or(2, CONFIG_SYS_OR2_PRELIM);
170 set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
171 lbc->lbcr = CONFIG_SYS_LBC_LBCR;
174 lbc->lsrt = CONFIG_SYS_LBC_LSRT;
175 lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
179 * MPC8548 uses "new" 15-16 style addressing.
181 cpu_board_rev = get_cpu_board_revision();
182 lsdmr_common = CONFIG_SYS_LBC_LSDMR_COMMON;
183 lsdmr_common |= LSDMR_BSMA1516;
186 * Issue PRECHARGE ALL command.
188 lbc->lsdmr = lsdmr_common | LSDMR_OP_PCHALL;
191 ppcDcbf((unsigned long) sdram_addr);
195 * Issue 8 AUTO REFRESH commands.
197 for (idx = 0; idx < 8; idx++) {
198 lbc->lsdmr = lsdmr_common | LSDMR_OP_ARFRSH;
201 ppcDcbf((unsigned long) sdram_addr);
206 * Issue 8 MODE-set command.
208 lbc->lsdmr = lsdmr_common | LSDMR_OP_MRW;
211 ppcDcbf((unsigned long) sdram_addr);
215 * Issue NORMAL OP command.
217 lbc->lsdmr = lsdmr_common | LSDMR_OP_NORMAL;
220 ppcDcbf((unsigned long) sdram_addr);
221 udelay(200); /* Overkill. Must wait > 200 bus cycles */
223 #endif /* enable SDRAM init */
226 #if defined(CONFIG_PCI) || defined(CONFIG_PCI1)
227 /* For some reason the Tundra PCI bridge shows up on itself as a
228 * different device. Work around that by refusing to configure it.
230 void dummy_func(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab) { }
232 static struct pci_config_table pci_mpc85xxcds_config_table[] = {
233 {0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}},
234 {0x1106, 0x0686, PCI_ANY_ID, 1, VIA_ID, 0, mpc85xx_config_via, {0,0,0}},
235 {0x1106, 0x0571, PCI_ANY_ID, 1, VIA_ID, 1,
236 mpc85xx_config_via_usbide, {0,0,0}},
237 {0x1105, 0x3038, PCI_ANY_ID, 1, VIA_ID, 2,
238 mpc85xx_config_via_usb, {0,0,0}},
239 {0x1106, 0x3038, PCI_ANY_ID, 1, VIA_ID, 3,
240 mpc85xx_config_via_usb2, {0,0,0}},
241 {0x1106, 0x3058, PCI_ANY_ID, 1, VIA_ID, 5,
242 mpc85xx_config_via_power, {0,0,0}},
243 {0x1106, 0x3068, PCI_ANY_ID, 1, VIA_ID, 6,
244 mpc85xx_config_via_ac97, {0,0,0}},
248 static struct pci_controller pci1_hose = {
249 config_table: pci_mpc85xxcds_config_table};
250 #endif /* CONFIG_PCI */
253 static struct pci_controller pci2_hose;
254 #endif /* CONFIG_PCI2 */
257 static struct pci_controller pcie1_hose;
258 #endif /* CONFIG_PCIE1 */
260 void pci_init_board(void)
262 volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
263 struct fsl_pci_info pci_info[4];
264 u32 devdisr, pordevsr, io_sel;
265 u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel;
266 int first_free_busno = 0;
269 int pcie_ep, pcie_configured;
271 devdisr = in_be32(&gur->devdisr);
272 pordevsr = in_be32(&gur->pordevsr);
273 porpllsr = in_be32(&gur->porpllsr);
274 io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
276 debug (" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel);
279 pci_speed = get_clock_freq (); /* PCI PSPEED in [4:5] */
280 pci_32 = pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32; /* PORDEVSR[15] */
281 pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;
282 pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
284 if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
285 SET_STD_PCI_INFO(pci_info[num], 1);
286 pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
287 printf ("\n PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
289 (pci_speed == 33333000) ? "33" :
290 (pci_speed == 66666000) ? "66" : "unknown",
291 pci_clk_sel ? "sync" : "async",
292 pci_agent ? "agent" : "host",
293 pci_arb ? "arbiter" : "external-arbiter",
296 first_free_busno = fsl_pci_init_port(&pci_info[num++],
297 &pci1_hose, first_free_busno);
299 #ifdef CONFIG_PCIX_CHECK
300 if (!(pordevsr & MPC85xx_PORDEVSR_PCI1)) {
302 if (CONFIG_SYS_CLK_FREQ < 66000000)
303 printf("PCI-X will only work at 66 MHz\n");
305 reg16 = PCI_X_CMD_MAX_SPLIT | PCI_X_CMD_MAX_READ
306 | PCI_X_CMD_ERO | PCI_X_CMD_DPERR_E;
307 pci_hose_write_config_word(hose, bus, PCIX_COMMAND, reg16);
311 printf (" PCI: disabled\n");
316 setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */
321 uint pci2_clk_sel = porpllsr & 0x4000; /* PORPLLSR[17] */
322 uint pci_dual = get_pci_dual (); /* PCI DUAL in CM_PCI[3] */
324 printf (" PCI2: 32 bit, 66 MHz, %s\n",
325 pci2_clk_sel ? "sync" : "async");
327 printf (" PCI2: disabled\n");
331 setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI2); /* disable */
332 #endif /* CONFIG_PCI2 */
335 pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
337 if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
338 SET_STD_PCIE_INFO(pci_info[num], 1);
339 pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
340 printf (" PCIE1 connected to Slot as %s (base addr %lx)\n",
341 pcie_ep ? "Endpoint" : "Root Complex",
344 first_free_busno = fsl_pci_init_port(&pci_info[num++],
345 &pcie1_hose, first_free_busno);
347 printf (" PCIE1: disabled\n");
352 setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */
356 int last_stage_init(void)
360 /* Change the resistors for the PHY */
361 /* This is needed to get the RGMII working for the 1.3+
363 if (get_board_version() == 0x13) {
364 miiphy_write(CONFIG_TSEC1_NAME,
365 TSEC1_PHY_ADDR, 29, 18);
367 miiphy_read(CONFIG_TSEC1_NAME,
368 TSEC1_PHY_ADDR, 30, &temp);
370 temp = (temp & 0xf03f);
371 temp |= 2 << 9; /* 36 ohm */
372 temp |= 2 << 6; /* 39 ohm */
374 miiphy_write(CONFIG_TSEC1_NAME,
375 TSEC1_PHY_ADDR, 30, temp);
377 miiphy_write(CONFIG_TSEC1_NAME,
378 TSEC1_PHY_ADDR, 29, 3);
380 miiphy_write(CONFIG_TSEC1_NAME,
381 TSEC1_PHY_ADDR, 30, 0x8000);
388 #if defined(CONFIG_OF_BOARD_SETUP)
389 void ft_pci_setup(void *blob, bd_t *bd)