2 * Copyright 2004 Freescale Semiconductor.
4 * See file CREDITS for list of people who contributed to this
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 of
10 * the License, or (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
25 #include <asm/processor.h>
27 #include <asm/immap_85xx.h>
28 #include <asm/fsl_ddr_sdram.h>
30 #include <spd_sdram.h>
32 #include <fdt_support.h>
34 #include "../common/cadmus.h"
35 #include "../common/eeprom.h"
36 #include "../common/via.h"
38 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
39 extern void ddr_enable_ecc(unsigned int dram_size);
42 void local_bus_init(void);
45 * I/O Port configuration table
47 * if conf is 1, then that port pin will be configured at boot time
48 * according to the five values podr/pdir/ppar/psor/pdat for that entry
51 const iop_conf_t iop_conf_tab[4][32] = {
53 /* Port A configuration */
54 { /* conf ppar psor pdir podr pdat */
55 /* PA31 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxENB */
56 /* PA30 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 TxClav */
57 /* PA29 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 TxSOC */
58 /* PA28 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 RxENB */
59 /* PA27 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxSOC */
60 /* PA26 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 RxClav */
61 /* PA25 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[0] */
62 /* PA24 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[1] */
63 /* PA23 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[2] */
64 /* PA22 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[3] */
65 /* PA21 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[4] */
66 /* PA20 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[5] */
67 /* PA19 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[6] */
68 /* PA18 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXD[7] */
69 /* PA17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[7] */
70 /* PA16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[6] */
71 /* PA15 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[5] */
72 /* PA14 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[4] */
73 /* PA13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[3] */
74 /* PA12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[2] */
75 /* PA11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[1] */
76 /* PA10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXD[0] */
77 /* PA9 */ { 0, 1, 1, 1, 0, 0 }, /* FCC1 L1TXD */
78 /* PA8 */ { 0, 1, 1, 0, 0, 0 }, /* FCC1 L1RXD */
79 /* PA7 */ { 0, 0, 0, 1, 0, 0 }, /* PA7 */
80 /* PA6 */ { 0, 1, 1, 1, 0, 0 }, /* TDM A1 L1RSYNC */
81 /* PA5 */ { 0, 0, 0, 1, 0, 0 }, /* PA5 */
82 /* PA4 */ { 0, 0, 0, 1, 0, 0 }, /* PA4 */
83 /* PA3 */ { 0, 0, 0, 1, 0, 0 }, /* PA3 */
84 /* PA2 */ { 0, 0, 0, 1, 0, 0 }, /* PA2 */
85 /* PA1 */ { 1, 0, 0, 0, 0, 0 }, /* FREERUN */
86 /* PA0 */ { 0, 0, 0, 1, 0, 0 } /* PA0 */
89 /* Port B configuration */
90 { /* conf ppar psor pdir podr pdat */
91 /* PB31 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TX_ER */
92 /* PB30 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_DV */
93 /* PB29 */ { 1, 1, 1, 1, 0, 0 }, /* FCC2 MII TX_EN */
94 /* PB28 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_ER */
95 /* PB27 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII COL */
96 /* PB26 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII CRS */
97 /* PB25 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[3] */
98 /* PB24 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[2] */
99 /* PB23 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[1] */
100 /* PB22 */ { 1, 1, 0, 1, 0, 0 }, /* FCC2 MII TxD[0] */
101 /* PB21 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[0] */
102 /* PB20 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[1] */
103 /* PB19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[2] */
104 /* PB18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RxD[3] */
105 /* PB17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RX_DIV */
106 /* PB16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RX_ERR */
107 /* PB15 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TX_ERR */
108 /* PB14 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TX_EN */
109 /* PB13 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:COL */
110 /* PB12 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:CRS */
111 /* PB11 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
112 /* PB10 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
113 /* PB9 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
114 /* PB8 */ { 0, 1, 0, 0, 0, 0 }, /* FCC3:RXD */
115 /* PB7 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
116 /* PB6 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
117 /* PB5 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
118 /* PB4 */ { 0, 1, 0, 1, 0, 0 }, /* FCC3:TXD */
119 /* PB3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
120 /* PB2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
121 /* PB1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
122 /* PB0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
126 { /* conf ppar psor pdir podr pdat */
127 /* PC31 */ { 0, 0, 0, 1, 0, 0 }, /* PC31 */
128 /* PC30 */ { 0, 0, 0, 1, 0, 0 }, /* PC30 */
129 /* PC29 */ { 0, 1, 1, 0, 0, 0 }, /* SCC1 EN *CLSN */
130 /* PC28 */ { 0, 0, 0, 1, 0, 0 }, /* PC28 */
131 /* PC27 */ { 0, 0, 0, 1, 0, 0 }, /* UART Clock in */
132 /* PC26 */ { 0, 0, 0, 1, 0, 0 }, /* PC26 */
133 /* PC25 */ { 0, 0, 0, 1, 0, 0 }, /* PC25 */
134 /* PC24 */ { 0, 0, 0, 1, 0, 0 }, /* PC24 */
135 /* PC23 */ { 0, 1, 0, 1, 0, 0 }, /* ATMTFCLK */
136 /* PC22 */ { 0, 1, 0, 0, 0, 0 }, /* ATMRFCLK */
137 /* PC21 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN RXCLK */
138 /* PC20 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN TXCLK */
139 /* PC19 */ { 1, 1, 0, 0, 0, 0 }, /* FCC2 MII RX_CLK CLK13 */
140 /* PC18 */ { 1, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK14) */
141 /* PC17 */ { 0, 0, 0, 1, 0, 0 }, /* PC17 */
142 /* PC16 */ { 0, 1, 0, 0, 0, 0 }, /* FCC Tx Clock (CLK16) */
143 /* PC15 */ { 1, 1, 0, 0, 0, 0 }, /* PC15 */
144 /* PC14 */ { 0, 1, 0, 0, 0, 0 }, /* SCC1 EN *CD */
145 /* PC13 */ { 0, 0, 0, 1, 0, 0 }, /* PC13 */
146 /* PC12 */ { 0, 1, 0, 1, 0, 0 }, /* PC12 */
147 /* PC11 */ { 0, 0, 0, 1, 0, 0 }, /* LXT971 transmit control */
148 /* PC10 */ { 1, 0, 0, 1, 0, 0 }, /* FETHMDC */
149 /* PC9 */ { 1, 0, 0, 0, 0, 0 }, /* FETHMDIO */
150 /* PC8 */ { 0, 0, 0, 1, 0, 0 }, /* PC8 */
151 /* PC7 */ { 0, 0, 0, 1, 0, 0 }, /* PC7 */
152 /* PC6 */ { 0, 0, 0, 1, 0, 0 }, /* PC6 */
153 /* PC5 */ { 0, 0, 0, 1, 0, 0 }, /* PC5 */
154 /* PC4 */ { 0, 0, 0, 1, 0, 0 }, /* PC4 */
155 /* PC3 */ { 0, 0, 0, 1, 0, 0 }, /* PC3 */
156 /* PC2 */ { 0, 0, 0, 1, 0, 1 }, /* ENET FDE */
157 /* PC1 */ { 0, 0, 0, 1, 0, 0 }, /* ENET DSQE */
158 /* PC0 */ { 0, 0, 0, 1, 0, 0 }, /* ENET LBK */
162 { /* conf ppar psor pdir podr pdat */
163 /* PD31 */ { 1, 1, 0, 0, 0, 0 }, /* SCC1 EN RxD */
164 /* PD30 */ { 1, 1, 1, 1, 0, 0 }, /* SCC1 EN TxD */
165 /* PD29 */ { 1, 1, 0, 1, 0, 0 }, /* SCC1 EN TENA */
166 /* PD28 */ { 0, 1, 0, 0, 0, 0 }, /* PD28 */
167 /* PD27 */ { 0, 1, 1, 1, 0, 0 }, /* PD27 */
168 /* PD26 */ { 0, 0, 0, 1, 0, 0 }, /* PD26 */
169 /* PD25 */ { 0, 0, 0, 1, 0, 0 }, /* PD25 */
170 /* PD24 */ { 0, 0, 0, 1, 0, 0 }, /* PD24 */
171 /* PD23 */ { 0, 0, 0, 1, 0, 0 }, /* PD23 */
172 /* PD22 */ { 0, 0, 0, 1, 0, 0 }, /* PD22 */
173 /* PD21 */ { 0, 0, 0, 1, 0, 0 }, /* PD21 */
174 /* PD20 */ { 0, 0, 0, 1, 0, 0 }, /* PD20 */
175 /* PD19 */ { 0, 0, 0, 1, 0, 0 }, /* PD19 */
176 /* PD18 */ { 0, 0, 0, 1, 0, 0 }, /* PD18 */
177 /* PD17 */ { 0, 1, 0, 0, 0, 0 }, /* FCC1 ATMRXPRTY */
178 /* PD16 */ { 0, 1, 0, 1, 0, 0 }, /* FCC1 ATMTXPRTY */
179 /* PD15 */ { 0, 1, 1, 0, 1, 0 }, /* I2C SDA */
180 /* PD14 */ { 0, 0, 0, 1, 0, 0 }, /* LED */
181 /* PD13 */ { 0, 0, 0, 0, 0, 0 }, /* PD13 */
182 /* PD12 */ { 0, 0, 0, 0, 0, 0 }, /* PD12 */
183 /* PD11 */ { 0, 0, 0, 0, 0, 0 }, /* PD11 */
184 /* PD10 */ { 0, 0, 0, 0, 0, 0 }, /* PD10 */
185 /* PD9 */ { 0, 1, 0, 1, 0, 0 }, /* SMC1 TXD */
186 /* PD8 */ { 0, 1, 0, 0, 0, 0 }, /* SMC1 RXD */
187 /* PD7 */ { 0, 0, 0, 1, 0, 1 }, /* PD7 */
188 /* PD6 */ { 0, 0, 0, 1, 0, 1 }, /* PD6 */
189 /* PD5 */ { 0, 0, 0, 1, 0, 1 }, /* PD5 */
190 /* PD4 */ { 0, 0, 0, 1, 0, 1 }, /* PD4 */
191 /* PD3 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
192 /* PD2 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
193 /* PD1 */ { 0, 0, 0, 0, 0, 0 }, /* pin doesn't exist */
194 /* PD0 */ { 0, 0, 0, 0, 0, 0 } /* pin doesn't exist */
198 int checkboard (void)
200 volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
202 /* PCI slot in USER bits CSR[6:7] by convention. */
203 uint pci_slot = get_pci_slot ();
205 uint pci_dual = get_pci_dual (); /* PCI DUAL in CM_PCI[3] */
206 uint pci1_32 = gur->pordevsr & 0x10000; /* PORDEVSR[15] */
207 uint pci1_clk_sel = gur->porpllsr & 0x8000; /* PORPLLSR[16] */
208 uint pci2_clk_sel = gur->porpllsr & 0x4000; /* PORPLLSR[17] */
210 uint pci1_speed = get_clock_freq (); /* PCI PSPEED in [4:5] */
212 uint cpu_board_rev = get_cpu_board_revision ();
214 printf ("Board: CDS Version 0x%02x, PCI Slot %d\n",
215 get_board_version (), pci_slot);
217 printf ("CPU Board Revision %d.%d (0x%04x)\n",
218 MPC85XX_CPU_BOARD_MAJOR (cpu_board_rev),
219 MPC85XX_CPU_BOARD_MINOR (cpu_board_rev), cpu_board_rev);
221 printf("PCI1: %d bit, %s MHz, %s\n",
223 (pci1_speed == 33000000) ? "33" :
224 (pci1_speed == 66000000) ? "66" : "unknown",
225 pci1_clk_sel ? "sync" : "async");
228 printf("PCI2: 32 bit, 66 MHz, %s\n",
229 pci2_clk_sel ? "sync" : "async");
231 printf("PCI2: disabled\n");
235 * Initialize local bus.
243 * Initialize Local Bus
248 volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
249 volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
258 * Fix Local Bus clock glitch when DLL is enabled.
260 * If localbus freq is < 66MHz, DLL bypass mode must be used.
261 * If localbus freq is > 133MHz, DLL can be safely enabled.
262 * Between 66 and 133, the DLL is enabled with an override workaround.
265 get_sys_info(&sysinfo);
266 clkdiv = lbc->lcrr & LCRR_CLKDIV;
267 lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
270 lbc->lcrr |= 0x80000000; /* DLL Bypass */
272 } else if (lbc_hz >= 133) {
273 lbc->lcrr &= (~0x80000000); /* DLL Enabled */
276 lbc->lcrr &= (~0x8000000); /* DLL Enabled */
280 * Sample LBC DLL ctrl reg, upshift it to set the
283 temp_lbcdll = gur->lbcdllcr;
284 gur->lbcdllcr = (((temp_lbcdll & 0xff) << 16) | 0x80000000);
285 asm("sync;isync;msync");
290 * Initialize SDRAM memory on the Local Bus.
292 void lbc_sdram_init(void)
294 #if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
297 volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
298 uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
303 print_size(CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024,
307 * Setup SDRAM Base and Option Registers
309 set_lbc_or(2, CONFIG_SYS_OR2_PRELIM);
310 set_lbc_br(2, CONFIG_SYS_BR2_PRELIM);
311 lbc->lbcr = CONFIG_SYS_LBC_LBCR;
314 lbc->lsrt = CONFIG_SYS_LBC_LSRT;
315 lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
319 * Determine which address lines to use baed on CPU board rev.
321 cpu_board_rev = get_cpu_board_revision();
322 lsdmr_common = CONFIG_SYS_LBC_LSDMR_COMMON;
323 if (cpu_board_rev == MPC85XX_CPU_BOARD_REV_1_0) {
324 lsdmr_common |= LSDMR_BSMA1617;
325 } else if (cpu_board_rev == MPC85XX_CPU_BOARD_REV_1_1) {
326 lsdmr_common |= LSDMR_BSMA1516;
329 * Assume something unable to identify itself is
330 * really old, and likely has lines 16/17 mapped.
332 lsdmr_common |= LSDMR_BSMA1617;
336 * Issue PRECHARGE ALL command.
338 lbc->lsdmr = lsdmr_common | LSDMR_OP_PCHALL;
341 ppcDcbf((unsigned long) sdram_addr);
345 * Issue 8 AUTO REFRESH commands.
347 for (idx = 0; idx < 8; idx++) {
348 lbc->lsdmr = lsdmr_common | LSDMR_OP_ARFRSH;
351 ppcDcbf((unsigned long) sdram_addr);
356 * Issue 8 MODE-set command.
358 lbc->lsdmr = lsdmr_common | LSDMR_OP_MRW;
361 ppcDcbf((unsigned long) sdram_addr);
365 * Issue NORMAL OP command.
367 lbc->lsdmr = lsdmr_common | LSDMR_OP_NORMAL;
370 ppcDcbf((unsigned long) sdram_addr);
371 udelay(200); /* Overkill. Must wait > 200 bus cycles */
373 #endif /* enable SDRAM init */
377 /* For some reason the Tundra PCI bridge shows up on itself as a
378 * different device. Work around that by refusing to configure it
380 void dummy_func(struct pci_controller* hose, pci_dev_t dev, struct pci_config_table *tab) { }
382 static struct pci_config_table pci_mpc85xxcds_config_table[] = {
383 {0x10e3, 0x0513, PCI_ANY_ID, 1, 3, PCI_ANY_ID, dummy_func, {0,0,0}},
384 {0x1106, 0x0686, PCI_ANY_ID, 1, VIA_ID, 0, mpc85xx_config_via, {0,0,0}},
385 {0x1106, 0x0571, PCI_ANY_ID, 1, VIA_ID, 1,
386 mpc85xx_config_via_usbide, {0,0,0}},
387 {0x1105, 0x3038, PCI_ANY_ID, 1, VIA_ID, 2,
388 mpc85xx_config_via_usb, {0,0,0}},
389 {0x1106, 0x3038, PCI_ANY_ID, 1, VIA_ID, 3,
390 mpc85xx_config_via_usb2, {0,0,0}},
391 {0x1106, 0x3058, PCI_ANY_ID, 1, VIA_ID, 5,
392 mpc85xx_config_via_power, {0,0,0}},
393 {0x1106, 0x3068, PCI_ANY_ID, 1, VIA_ID, 6,
394 mpc85xx_config_via_ac97, {0,0,0}},
399 static struct pci_controller hose[] = {
401 config_table: pci_mpc85xxcds_config_table,
403 #ifdef CONFIG_MPC85XX_PCI2
414 pci_mpc85xx_init(hose);
418 #if defined(CONFIG_OF_BOARD_SETUP)
420 ft_pci_setup(void *blob, bd_t *bd)
425 node = fdt_path_offset(blob, "/aliases");
429 path = fdt_getprop(blob, node, "pci0", NULL);
431 tmp[1] = hose[0].last_busno - hose[0].first_busno;
432 do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
435 #ifdef CONFIG_MPC85XX_PCI2
436 path = fdt_getprop(blob, node, "pci1", NULL);
438 tmp[1] = hose[1].last_busno - hose[1].first_busno;
439 do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);