2 * Maintainer : Steve Sakoman <steve@sakoman.com>
4 * Derived from Beagle Board, 3430 SDP, and OMAP3EVM code by
5 * Richard Woodruff <r-woodruff2@ti.com>
6 * Syed Mohammed Khasim <khasim@ti.com>
7 * Sunil Kumar <sunilsaini05@gmail.com>
8 * Shashi Ranjan <shashiranjanmca05@gmail.com>
10 * (C) Copyright 2004-2008
11 * Texas Instruments, <www.ti.com>
13 * See file CREDITS for list of people who contributed to this
16 * This program is free software; you can redistribute it and/or
17 * modify it under the terms of the GNU General Public License as
18 * published by the Free Software Foundation; either version 2 of
19 * the License, or (at your option) any later version.
21 * This program is distributed in the hope that it will be useful,
22 * but WITHOUT ANY WARRANTY; without even the implied warranty of
23 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
24 * GNU General Public License for more details.
26 * You should have received a copy of the GNU General Public License
27 * along with this program; if not, write to the Free Software
28 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
34 #include <linux/mtd/nand.h>
36 #include <asm/arch/mmc_host_def.h>
37 #include <asm/arch/mux.h>
38 #include <asm/arch/mem.h>
39 #include <asm/arch/sys_proto.h>
40 #include <asm/arch/omap_gpmc.h>
42 #include <asm/mach-types.h>
45 DECLARE_GLOBAL_DATA_PTR;
47 #define TWL4030_I2C_BUS 0
48 #define EXPANSION_EEPROM_I2C_BUS 2
49 #define EXPANSION_EEPROM_I2C_ADDRESS 0x51
51 #define GUMSTIX_SUMMIT 0x01000200
52 #define GUMSTIX_TOBI 0x02000200
53 #define GUMSTIX_TOBI_DUO 0x03000200
54 #define GUMSTIX_PALO35 0x04000200
55 #define GUMSTIX_PALO43 0x05000200
56 #define GUMSTIX_CHESTNUT43 0x06000200
57 #define GUMSTIX_PINTO 0x07000200
58 #define GUMSTIX_GALLOP43 0x08000200
60 #define ETTUS_USRP_E 0x01000300
62 #define GUMSTIX_NO_EEPROM 0xffffffff
65 unsigned int device_vendor;
66 unsigned char revision;
67 unsigned char content;
73 #if defined(CONFIG_CMD_NET)
74 static void setup_net_chip(void);
77 /* GPMC definitions for LAN9221 chips on Tobi expansion boards */
78 static const u32 gpmc_lan_config[] = {
79 NET_LAN9221_GPMC_CONFIG1,
80 NET_LAN9221_GPMC_CONFIG2,
81 NET_LAN9221_GPMC_CONFIG3,
82 NET_LAN9221_GPMC_CONFIG4,
83 NET_LAN9221_GPMC_CONFIG5,
84 NET_LAN9221_GPMC_CONFIG6,
85 /*CONFIG7- computed as params */
90 * Description: Early hardware init.
94 gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
95 /* board id for Linux */
96 gd->bd->bi_arch_number = MACH_TYPE_OVERO;
98 gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
104 * Routine: omap_rev_string
105 * Description: For SPL builds output board rev
107 #ifdef CONFIG_SPL_BUILD
108 void omap_rev_string(void)
114 * Routine: get_board_revision
115 * Description: Returns the board revision
117 int get_board_revision(void)
121 #ifdef CONFIG_DRIVER_OMAP34XX_I2C
124 /* board revisions <= R2410 connect 4030 irq_1 to gpio112 */
125 /* these boards should return a revision number of 0 */
126 /* the code below forces a 4030 RTC irq to ensure that gpio112 is low */
127 i2c_set_bus_num(TWL4030_I2C_BUS);
129 i2c_write(0x4B, 0x29, 1, &data, 1);
131 i2c_write(0x4B, 0x2b, 1, &data, 1);
132 i2c_read(0x4B, 0x2a, 1, &data, 1);
135 if (!gpio_request(112, "") &&
136 !gpio_request(113, "") &&
137 !gpio_request(115, "")) {
139 gpio_direction_input(112);
140 gpio_direction_input(113);
141 gpio_direction_input(115);
143 revision = gpio_get_value(115) << 2 |
144 gpio_get_value(113) << 1 |
147 puts("Error: unable to acquire board revision GPIOs\n");
154 #ifdef CONFIG_SPL_BUILD
156 * Routine: get_board_mem_timings
157 * Description: If we use SPL then there is no x-loader nor config header
158 * so we have to setup the DDR timings ourself on both banks.
160 void get_board_mem_timings(u32 *mcfg, u32 *ctrla, u32 *ctrlb, u32 *rfr_ctrl,
163 *mr = MICRON_V_MR_165;
164 switch (get_board_revision()) {
165 case REVISION_0: /* Micron 1286MB/256MB, 1/2 banks of 128MB */
166 *mcfg = MICRON_V_MCFG_165(128 << 20);
167 *ctrla = MICRON_V_ACTIMA_165;
168 *ctrlb = MICRON_V_ACTIMB_165;
169 *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
171 case REVISION_1: /* Micron 256MB/512MB, 1/2 banks of 256MB */
172 *mcfg = MICRON_V_MCFG_165(256 << 20);
173 *ctrla = MICRON_V_ACTIMA_165;
174 *ctrlb = MICRON_V_ACTIMB_165;
175 *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
177 case REVISION_2: /* Hynix 256MB/512MB, 1/2 banks of 256MB */
178 *mcfg = HYNIX_V_MCFG_165(256 << 20);
179 *ctrla = HYNIX_V_ACTIMA_165;
180 *ctrlb = HYNIX_V_ACTIMB_165;
181 *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
184 *mcfg = MICRON_V_MCFG_165(128 << 20);
185 *ctrla = MICRON_V_ACTIMA_165;
186 *ctrlb = MICRON_V_ACTIMB_165;
187 *rfr_ctrl = SDP_3430_SDRC_RFR_CTRL_165MHz;
193 * Routine: get_sdio2_config
194 * Description: Return information about the wifi module connection
195 * Returns 0 if the module connects though a level translator
196 * Returns 1 if the module connects directly
198 int get_sdio2_config(void)
202 if (!gpio_request(130, "") && !gpio_request(139, "")) {
204 gpio_direction_output(130, 0);
205 gpio_direction_input(139);
208 gpio_set_value(130, 0);
209 if (gpio_get_value(139) == 0) {
210 gpio_set_value(130, 1);
211 if (gpio_get_value(139) == 1)
215 gpio_direction_input(130);
217 puts("Error: unable to acquire sdio2 clk GPIOs\n");
225 * Routine: get_expansion_id
226 * Description: This function checks for expansion board by checking I2C
227 * bus 2 for the availability of an AT24C01B serial EEPROM.
228 * returns the device_vendor field from the EEPROM
230 unsigned int get_expansion_id(void)
232 i2c_set_bus_num(EXPANSION_EEPROM_I2C_BUS);
234 /* return GUMSTIX_NO_EEPROM if eeprom doesn't respond */
235 if (i2c_probe(EXPANSION_EEPROM_I2C_ADDRESS) == 1) {
236 i2c_set_bus_num(TWL4030_I2C_BUS);
237 return GUMSTIX_NO_EEPROM;
240 /* read configuration data */
241 i2c_read(EXPANSION_EEPROM_I2C_ADDRESS, 0, 1, (u8 *)&expansion_config,
242 sizeof(expansion_config));
244 i2c_set_bus_num(TWL4030_I2C_BUS);
246 return expansion_config.device_vendor;
250 * Routine: misc_init_r
251 * Description: Configure board specific parts
253 int misc_init_r(void)
255 twl4030_power_init();
256 twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
258 #if defined(CONFIG_CMD_NET)
262 printf("Board revision: %d\n", get_board_revision());
264 switch (get_sdio2_config()) {
266 puts("Tranceiver detected on mmc2\n");
267 MUX_OVERO_SDIO2_TRANSCEIVER();
270 puts("Direct connection on mmc2\n");
271 MUX_OVERO_SDIO2_DIRECT();
274 puts("Unable to detect mmc2 connection type\n");
277 switch (get_expansion_id()) {
279 printf("Recognized Summit expansion board (rev %d %s)\n",
280 expansion_config.revision,
281 expansion_config.fab_revision);
282 setenv("defaultdisplay", "dvi");
285 printf("Recognized Tobi expansion board (rev %d %s)\n",
286 expansion_config.revision,
287 expansion_config.fab_revision);
288 setenv("defaultdisplay", "dvi");
290 case GUMSTIX_TOBI_DUO:
291 printf("Recognized Tobi Duo expansion board (rev %d %s)\n",
292 expansion_config.revision,
293 expansion_config.fab_revision);
294 /* second lan chip */
295 enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[4],
296 0x2B000000, GPMC_SIZE_16M);
299 printf("Recognized Palo35 expansion board (rev %d %s)\n",
300 expansion_config.revision,
301 expansion_config.fab_revision);
302 setenv("defaultdisplay", "lcd35");
305 printf("Recognized Palo43 expansion board (rev %d %s)\n",
306 expansion_config.revision,
307 expansion_config.fab_revision);
308 setenv("defaultdisplay", "lcd43");
310 case GUMSTIX_CHESTNUT43:
311 printf("Recognized Chestnut43 expansion board (rev %d %s)\n",
312 expansion_config.revision,
313 expansion_config.fab_revision);
314 setenv("defaultdisplay", "lcd43");
317 printf("Recognized Pinto expansion board (rev %d %s)\n",
318 expansion_config.revision,
319 expansion_config.fab_revision);
321 case GUMSTIX_GALLOP43:
322 printf("Recognized Gallop43 expansion board (rev %d %s)\n",
323 expansion_config.revision,
324 expansion_config.fab_revision);
325 setenv("defaultdisplay", "lcd43");
328 printf("Recognized Ettus Research USRP-E (rev %d %s)\n",
329 expansion_config.revision,
330 expansion_config.fab_revision);
332 setenv("defaultdisplay", "dvi");
334 case GUMSTIX_NO_EEPROM:
335 puts("No EEPROM on expansion board\n");
338 puts("Unrecognized expansion board\n");
341 if (expansion_config.content == 1)
342 setenv(expansion_config.env_var, expansion_config.env_setting);
350 * Routine: set_muxconf_regs
351 * Description: Setting up the configuration Mux registers specific to the
352 * hardware. Many pins need to be moved from protect to primary
355 void set_muxconf_regs(void)
360 #if defined(CONFIG_CMD_NET)
362 * Routine: setup_net_chip
363 * Description: Setting up the configuration GPMC registers specific to the
366 static void setup_net_chip(void)
368 struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
371 enable_gpmc_cs_config(gpmc_lan_config, &gpmc_cfg->cs[5], 0x2C000000,
374 /* Enable off mode for NWE in PADCONF_GPMC_NWE register */
375 writew(readw(&ctrl_base ->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
376 /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */
377 writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe);
378 /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
379 writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
380 &ctrl_base->gpmc_nadv_ale);
382 /* Make GPIO 64 as output pin and send a magic pulse through it */
383 if (!gpio_request(64, "")) {
384 gpio_direction_output(64, 0);
385 gpio_set_value(64, 1);
387 gpio_set_value(64, 0);
389 gpio_set_value(64, 1);
394 int board_eth_init(bd_t *bis)
397 #ifdef CONFIG_SMC911X
398 rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
403 #if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
404 int board_mmc_init(bd_t *bis)
406 omap_mmc_init(0, 0, 0);