2 * Copyright (C) 2003 Travis B. Sawyer <travis.sawyer@sandburst.com>
4 * See file CREDITS for list of people who contributed to this
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 of
10 * the License, or (at your option) any later version.
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
25 #include <asm/processor.h>
26 #include <spd_sdram.h>
30 DECLARE_GLOBAL_DATA_PTR;
32 #define BOOT_SMALL_FLASH 32 /* 00100000 */
33 #define FLASH_ONBD_N 2 /* 00000010 */
34 #define FLASH_SRAM_SEL 1 /* 00000001 */
36 long int fixed_sdram (void);
38 int board_early_init_f(void)
41 /* TBS: Setup the GPIO access for the user LEDs */
42 mfsdr(sdr_pfc0, sdrreg);
43 mtsdr(sdr_pfc0, (sdrreg & ~0x00000100) | 0x00000E00);
44 out32(CONFIG_SYS_GPIO_BASE + 0x018, (USR_LED0 | USR_LED1 | USR_LED2 | USR_LED3));
50 /*--------------------------------------------------------------------
51 * Setup the external bus controller/chip selects
52 *-------------------------------------------------------------------*/
54 /* set the bus controller */
55 mtebc (pb0ap, 0x04055200); /* FLASH/SRAM */
56 mtebc (pb0cr, 0xfff18000); /* BAS=0xfff 1MB R/W 8-bit */
57 mtebc (pb1ap, 0x04055200); /* FLASH/SRAM */
58 mtebc (pb1cr, 0xfe098000); /* BAS=0xff8 16MB R/W 8-bit */
60 /*--------------------------------------------------------------------
61 * Setup the interrupt controller polarities, triggers, etc.
62 *-------------------------------------------------------------------*/
64 * Because of the interrupt handling rework to handle 440GX interrupts
65 * with the common code, we needed to change names of the UIC registers.
66 * Here the new relationship:
68 * U-Boot name 440GX name
69 * -----------------------
75 mtdcr (uic1sr, 0xffffffff); /* clear all */
76 mtdcr (uic1er, 0x00000000); /* disable all */
77 mtdcr (uic1cr, 0x00000003); /* SMI & UIC1 crit are critical */
78 mtdcr (uic1pr, 0xfffffe00); /* per ref-board manual */
79 mtdcr (uic1tr, 0x01c00000); /* per ref-board manual */
80 mtdcr (uic1vr, 0x00000001); /* int31 highest, base=0x000 */
81 mtdcr (uic1sr, 0xffffffff); /* clear all */
83 mtdcr (uic2sr, 0xffffffff); /* clear all */
84 mtdcr (uic2er, 0x00000000); /* disable all */
85 mtdcr (uic2cr, 0x00000000); /* all non-critical */
86 mtdcr (uic2pr, 0xffffc0ff); /* per ref-board manual */
87 mtdcr (uic2tr, 0x00ff8000); /* per ref-board manual */
88 mtdcr (uic2vr, 0x00000001); /* int31 highest, base=0x000 */
89 mtdcr (uic2sr, 0xffffffff); /* clear all */
91 mtdcr (uic3sr, 0xffffffff); /* clear all */
92 mtdcr (uic3er, 0x00000000); /* disable all */
93 mtdcr (uic3cr, 0x00000000); /* all non-critical */
94 mtdcr (uic3pr, 0xffffffff); /* per ref-board manual */
95 mtdcr (uic3tr, 0x00ff8c0f); /* per ref-board manual */
96 mtdcr (uic3vr, 0x00000001); /* int31 highest, base=0x000 */
97 mtdcr (uic3sr, 0xffffffff); /* clear all */
99 mtdcr (uic0sr, 0xfc000000); /* clear all */
100 mtdcr (uic0er, 0x00000000); /* disable all */
101 mtdcr (uic0cr, 0x00000000); /* all non-critical */
102 mtdcr (uic0pr, 0xfc000000); /* */
103 mtdcr (uic0tr, 0x00000000); /* */
104 mtdcr (uic0vr, 0x00000001); /* */
112 int checkboard (void)
114 printf ("Board: XES XPedite1000 440GX\n");
120 phys_size_t initdram (int board_type)
124 #if defined(CONFIG_SPD_EEPROM)
125 dram_size = spd_sdram ();
127 dram_size = fixed_sdram ();
133 #if defined(CONFIG_SYS_DRAM_TEST)
136 uint *pstart = (uint *) 0x00000000;
137 uint *pend = (uint *) 0x08000000;
140 for (p = pstart; p < pend; p++)
143 for (p = pstart; p < pend; p++) {
144 if (*p != 0xaaaaaaaa) {
145 printf ("SDRAM test fails at: %08x\n", (uint) p);
150 for (p = pstart; p < pend; p++)
153 for (p = pstart; p < pend; p++) {
154 if (*p != 0x55555555) {
155 printf ("SDRAM test fails at: %08x\n", (uint) p);
163 #if !defined(CONFIG_SPD_EEPROM)
164 /*************************************************************************
165 * fixed sdram init -- doesn't use serial presence detect.
167 * Assumes: 128 MB, non-ECC, non-registered
170 ************************************************************************/
171 long int fixed_sdram (void)
175 /*--------------------------------------------------------------------
177 *------------------------------------------------------------------*/
178 mtsdram (mem_uabba, 0x00000000); /* ubba=0 (default) */
179 mtsdram (mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */
180 mtsdram (mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */
181 mtsdram (mem_wddctr, 0x00000000); /* wrcp=0 dcd=0 */
182 mtsdram (mem_clktr, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */
184 /*--------------------------------------------------------------------
185 * Setup for board-specific specific mem
186 *------------------------------------------------------------------*/
188 * Following for CAS Latency = 2.5 @ 133 MHz PLB
190 mtsdram (mem_b0cr, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */
191 mtsdram (mem_tr0, 0x410a4012); /* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */
193 mtsdram (mem_tr1, 0x8080082f); /* SS=T2 SL=STAGE 3 CD=1 CT=0x02f */
194 mtsdram (mem_rtr, 0x08200000); /* Rate 15.625 ns @ 133 MHz PLB */
195 mtsdram (mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM */
196 udelay (400); /* Delay 200 usecs (min) */
198 /*--------------------------------------------------------------------
199 * Enable the controller, then wait for DCEN to complete
200 *------------------------------------------------------------------*/
201 mtsdram (mem_cfg0, 0x86000000); /* DCEN=1, PMUD=1, 64-bit */
203 mfsdram (mem_mcsts, reg);
204 if (reg & 0x80000000)
208 return (128 * 1024 * 1024); /* 128 MB */
210 #endif /* !defined(CONFIG_SPD_EEPROM) */
213 /*************************************************************************
216 * This routine is called just prior to registering the hose and gives
217 * the board the opportunity to check things. Returning a value of zero
218 * indicates that things are bad & PCI initialization should be aborted.
220 * Different boards may wish to customize the pci controller structure
221 * (add regions, override default access routines, etc) or perform
222 * certain pre-initialization actions.
224 ************************************************************************/
225 #if defined(CONFIG_PCI)
226 int pci_pre_init(struct pci_controller * hose )
229 /* See if we're supposed to setup the pci */
230 mfsdr(sdr_sdstp1, strap);
231 if ((strap & 0x00010000) == 0) {
235 #if defined(CONFIG_SYS_PCI_FORCE_PCI_CONV)
236 /* Setup System Device Register PCIX0_XCR */
237 mfsdr(sdr_xcr, strap);
239 mtsdr(sdr_xcr, strap);
243 #endif /* defined(CONFIG_PCI) */
245 /*************************************************************************
248 * The bootstrap configuration provides default settings for the pci
249 * inbound map (PIM). But the bootstrap config choices are limited and
250 * may not be sufficient for a given board.
252 ************************************************************************/
253 #if defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT)
254 void pci_target_init(struct pci_controller * hose )
256 /*--------------------------------------------------------------------------+
258 *--------------------------------------------------------------------------*/
259 out32r( PCIX0_PIM0SA, 0 ); /* disable */
260 out32r( PCIX0_PIM1SA, 0 ); /* disable */
261 out32r( PCIX0_PIM2SA, 0 ); /* disable */
262 out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */
264 /*--------------------------------------------------------------------------+
265 * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
266 * options to not support sizes such as 128/256 MB.
267 *--------------------------------------------------------------------------*/
268 out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE );
269 out32r( PCIX0_PIM0LAH, 0 );
270 out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
272 out32r( PCIX0_BAR0, 0 );
274 /*--------------------------------------------------------------------------+
275 * Program the board's subsystem id/vendor id
276 *--------------------------------------------------------------------------*/
277 out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID );
278 out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID );
280 out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
282 #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */
285 /*************************************************************************
288 * This routine is called to determine if a pci scan should be
289 * performed. With various hardware environments (especially cPCI and
290 * PPMC) it's insufficient to depend on the state of the arbiter enable
291 * bit in the strap register, or generic host/adapter assumptions.
293 * Rather than hard-code a bad assumption in the general 440 code, the
294 * 440 pci code requires the board to decide at runtime.
296 * Return 0 for adapter mode, non-zero for host (monarch) mode.
299 ************************************************************************/
300 #if defined(CONFIG_PCI)
301 int is_pci_host(struct pci_controller *hose)
303 return ((in32(CONFIG_SYS_GPIO_BASE + 0x1C) & 0x00000800) == 0);
305 #endif /* defined(CONFIG_PCI) */
309 * Returns 1 if keys pressed to start the power-on long-running tests
310 * Called from board_init_f().
312 int post_hotkeys_pressed(void)
318 void post_word_store (ulong a)
320 volatile ulong *save_addr =
321 (volatile ulong *)(CONFIG_SYS_POST_WORD_ADDR);
326 ulong post_word_load (void)
328 volatile ulong *save_addr =
329 (volatile ulong *)(CONFIG_SYS_POST_WORD_ADDR);
335 /*-----------------------------------------------------------------------------
336 * board_get_enetaddr -- Read the MAC Addresses in the I2C EEPROM
337 *-----------------------------------------------------------------------------
340 static void board_get_enetaddr(uchar *enet)
343 unsigned char buff[0x100], *cp;
349 i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
351 /* Read 256 bytes in EEPROM */
352 i2c_read (0x50, 0, 1, buff, 0x100);
355 for (i = 0; i < 6; i++,cp++)
358 printf("MAC address = %pM\n", enet);
362 int misc_init_r(void)
364 uchar enetaddr[6], i2c_enetaddr[6];
366 if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
367 board_get_enetaddr(i2c_enetaddr);
368 eth_setenv_enetaddr("ethaddr", i2c_enetaddr);
371 #ifdef CONFIG_HAS_ETH1
372 if (!eth_getenv_enetaddr("eth1addr", enetaddr)) {
373 board_get_enetaddr(i2c_enetaddr);
374 eth_setenv_enetaddr("eth1addr", i2c_enetaddr);
378 #ifdef CONFIG_HAS_ETH2
379 if (!eth_getenv_enetaddr("eth2addr", enetaddr)) {
380 board_get_enetaddr(i2c_enetaddr);
381 eth_setenv_enetaddr("eth2addr", i2c_enetaddr);
385 #ifdef CONFIG_HAS_ETH3
386 if (!eth_getenv_enetaddr("eth3addr", enetaddr)) {
387 board_get_enetaddr(i2c_enetaddr);
388 eth_setenv_enetaddr("eth3addr", i2c_enetaddr);