2 * (C) Copyright 2000-2004
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5 * See file CREDITS for list of people who contributed to this
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
27 #include <asm/mcfuart.h>
30 #include <asm/m5272.h>
34 #include <asm/m5282.h>
38 #include <asm/m5249.h>
41 DECLARE_GLOBAL_DATA_PTR;
44 #define DoubleClock(a) ((double)(CFG_CLK/2) / 32.0 / (double)(a))
46 #define DoubleClock(a) ((double)(CFG_CLK) / 32.0 / (double)(a))
49 void rs_serial_setbaudrate(int port,int baudrate)
51 #if defined(CONFIG_M5272) || defined(CONFIG_M5249)
52 volatile unsigned char *uartp;
53 double clock, fraction;
56 uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1);
58 uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE2);
60 clock = DoubleClock(baudrate); /* Set baud above */
62 fraction = ((clock - (int)clock) * 16.0) + 0.5;
64 uartp[MCFUART_UBG1] = (((int)clock >> 8) & 0xff); /* set msb baud */
65 uartp[MCFUART_UBG2] = ((int)clock & 0xff); /* set lsb baud */
66 uartp[MCFUART_UFPD] = ((int)fraction & 0xf); /* set baud fraction adjust */
70 void rs_serial_init(int port,int baudrate)
72 volatile unsigned char *uartp;
75 * Reset UART, get it into known state...
78 uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1);
80 uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE2);
82 uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETRX; /* reset RX */
83 uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETTX; /* reset TX */
84 uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETMRPTR; /* reset MR pointer */
85 uartp[MCFUART_UCR] = MCFUART_UCR_CMDRESETERR; /* reset Error pointer */
88 * Set port for CONSOLE_BAUD_RATE, 8 data bits, 1 stop bit, no parity.
90 uartp[MCFUART_UMR] = MCFUART_MR1_PARITYNONE | MCFUART_MR1_CS8;
91 uartp[MCFUART_UMR] = MCFUART_MR2_STOP1;
93 rs_serial_setbaudrate(port,baudrate);
95 uartp[MCFUART_UCSR] = MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER;
96 uartp[MCFUART_UCR] = MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE;
101 /****************************************************************************/
103 * Output a single character, using UART polled mode.
104 * This is used for console output.
107 void rs_put_char(char ch)
109 volatile unsigned char *uartp;
112 uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1);
114 for (i = 0; (i < 0x10000); i++) {
115 if (uartp[MCFUART_USR] & MCFUART_USR_TXREADY)
118 uartp[MCFUART_UTB] = ch;
124 volatile unsigned char *uartp;
126 uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1);
127 return((uartp[MCFUART_USR] & MCFUART_USR_RXREADY) ? 1 : 0);
130 int rs_get_char(void)
132 volatile unsigned char *uartp;
134 uartp = (volatile unsigned char *) (CFG_MBAR + MCFUART_BASE1);
135 return(uartp[MCFUART_URB]);
138 void serial_setbrg(void) {
139 rs_serial_setbaudrate(0,gd->bd->bi_baudrate);
142 int serial_init(void) {
143 rs_serial_init(0,gd->baudrate);
148 void serial_putc(const char c) {
154 void serial_puts (const char *s) {
160 int serial_getc(void) {
161 while(!rs_is_char());
162 return rs_get_char();