ITS#741 fixes

[openldap] / doc / guide / admin / quickstart.sdf

# $OpenLDAP$
# Copyright 1999-2000, The OpenLDAP Foundation, All Rights Reserved.
# COPYING RESTRICTIONS APPLY, see COPYRIGHT.

H1: A Quick-Start Guide

The following is a quick start guide to OpenLDAP software,
including the stand-alone LDAP daemon, {{slapd}}(8).

It is meant to step you through the basic steps needed to install
and configure OpenLDAP software. It should be used in conjunction
with the other chapters of this document, manual pages, and
other materials provided with the distribution (e.g. the {{F:INSTALL}}
document) or on the OpenLDAP web site (in particular, the
OpenLDAP Software FAQ).

If you intend to run OpenLDAP seriously, you should review the all
of this document before attempt to install the software.

Note: This quick start guide does not use strong authentication nor
any privacy and integrity protection services.  These services are
described in other chapters of the OpenLDAP Administrator's Guide.


.{{S: }}
^{{B: Get the software}}

. You can obtain a copy of the software by following the
instructions on the OpenLDAP download
page ({{URL: http://www.openldap.org/software/download/}}).
It is recommended that new users start with either the (latest)
{{release}} or the (most) {{stable}} release.


.{{S: }}
+{{B: Unpack the distribution}}

.Pick a directory for the LDAP source to live under, change
directory to there, and unpack the distribution using the
following commands:

..{{EX:gunzip -c openldap-VERSION.tgz | tar xvfB -}}

. then relocate yourself into the distribution directory:

..{{EX:cd openldap-VERSION}}

. You'll have to replace {{F:VERSION}} with the version
name of the release.


.{{S: }}
+{{B: Review documentation}}

. You should now review the {{F:COPYRIGHT}}, {{F:LICENSE}},
{{F:README}} and {{F:INSTALL}} documents provided with the distribution.
The {{F:COPYRIGHT}} and {{F:LICENSE}} provide information on
acceptable use, copying, and limitation of warranty of OpenLDAP
software. 

.{{S: }}
. You should also review other chapters of this document.
In particular, the {{SECT:Building and Installing OpenLDAP Software}}
chapter of this document provides detailed information on prerequisite
software and installation procedures.


.{{S: }}
+{{B: Run {{EX:configure}}}}

. You will need to run the provided {{EX:configure}} script to
{{configure}} to the distribution for building on your system.  The
{{EX:configure}} script accepts many command line options that enable or
disable optional software features.  Usually the defaults are okay,
but you may want to change them.  To get a complete list of options
that {{EX:configure}} accepts, use the {{EX:--help}} option:

..{{EX:./configure --help}}

. However, given that you using this guide, we'll assume you'll
are brave enough to just let {{EX:configure}} to determine
what's best:

..{{EX:./configure}}

. Assuming {{EX:configure}} doesn't dislike your system, you can
proceed with building the software.  If {{EX:configure}} did
complain, well, you'll likely need to go to the FAQ Installation
Section ({{URL:http://www.openldap.org/faq/}} and/or actually
read the {{SECT:Building and Installing OpenLDAP Software}}
chapter of this document.


.{{S: }}
+{{B:Build the software}}.

. The next step is to build the software.  This step has two
parts, first we construct dependencies and then we compile the
software:

..{{EX:make depend}}
..{{EX:make}}


. Both makes should complete without error.


.{{S: }}
+{{B:Test the build}}.

. To ensure a correct build, you should run the test suite
(it only takes a few minutes):

..{{EX:make test}}

. Tests which apply to your configuration will run and they
should pass.  Some tests, such as the replication test, may
be skipped.


.{{S: }}
+{{B:Install the software}}.

. You are now ready to install the software, this usually requires
{{super-user}} privledges: 

..{{EX:su root -c 'make install'}}

. Everything should now be installed under {{F:/usr/local}} (or
whatever installation prefix was used by {{EX:configure}}.


.{{S: }}
+{{B:Edit the configuration file}}.

. Use your favorite editor to edit the provided {{slapd.conf}}(5)
example (usually installed as {{F:/usr/local/etc/openldap/slapd.conf}})
to contain an LDBM database definition of the form:

..{{EX:database        ldbm}}
..{{EX:suffix          "dc=<MY-DOMAIN>, dc=<COM>"}}
..{{EX:rootdn          "cn=Manager, dc=<MY-DOMAIN>, dc=<COM>"}}
..{{EX:rootpw          secret}}
..{{EX:directory       /usr/local/var/openldap-ldbm}}

. Be sure to replace {{EX:<MY-DOMAIN>}} and {{EX:<COM>}} with
the appropriate domain components of your domain name.  For
example, for {{EX:example.com}}, use:

..{{EX:database        ldbm}}
..{{EX:suffix          "dc=example, dc=com"}}
..{{EX:rootdn          "cn=Manager, dc=example, dc=com"}}
..{{EX:rootpw          secret}}
..{{EX:directory       /usr/local/var/openldap-ldbm}}

.If your domain contains additional components, such as
{{EX:eng.uni.edu.eu}}, use:

..{{EX:database        ldbm}}
..{{EX:suffix          "dc=eng, dc=uni, dc=edu, dc=eu"}}
..{{EX:rootdn          "cn=Manager, dc=eng, dc=uni, dc=edu, dc=eu"}}
..{{EX:rootpw          secret}}
..{{EX:directory       /usr/local/var/openldap-ldbm}}

. Details regarding configuring {{slapd}}(8) can be found
in the {{slapd.conf}}(5) manual page and the
{{SECT:The slapd Configuration File}} chapter of this
document.

.{{S: }}
+{{B:Start SLAPD}}.

. You are now ready to start the stand-alone LDAP server, slapd(8),
by running the command:

..{{EX:su root -c /usr/local/libexec/slapd}}


. To check to see if the server is running and configured correctly,
you can run a search against it with {{ldapsearch}}(1).  By default,
ldapsearch is installed as {{F:/usr/local/bin/ldapsearch}}:

..{{EX:ldapsearch -x -b '' -s base '(objectclass=*)' namingContexts}}

. Note the use of single quotes around command parameters to prevent
special characters from being interpreted by the shell.  This should return:

..{{EX:dn:}}
..{{EX:namingContexts: dc=example, dc=com}}

. Details regarding running {{slapd}}(8) can be found
in the {{slapd}}(8) manual page and the
{{SECT:Running slapd}} chapter of this document.


.{{S: }}
+{{B:Add initial entries to your directory}}.

. You can use {{ldapadd}}(1) to add entries to your LDAP directory.
{{ldapadd}} expects input in LDIF form. We'll do it in two steps:

^^ create an LDIF file
++ run ldapadd

. Use your favorite editor and create an LDIF file that contains:

..{{EX:dn: dc=<MY-DOMAIN>, dc=<COM>}}
..{{EX:objectclass: dcObject}}
..{{EX:objectclass: organization}}
..{{EX:o: <MY ORGANIZATION>}}
..{{EX:dc: <MY-DOMAIN>}}
..{{EX:}}
..{{EX:dn: cn=Manager, dc=<MY-DOMAIN>, dc=<COM>}}
..{{EX:objectclass: organizationalRole}}
..{{EX:cn: Manager}}

. Be sure to replace <MY-DOMAIN> and <COM> with the appropriate domain
components of your domain name.  <MY ORGANIZATION> should be replaced
with the name of your organization.  If you cut and paste, be sure
to trim any leading and trailing whitespace from the example.

..{{EX:dn: dc=example, dc=com}}
..{{EX:objectclass: dcObject}}
..{{EX:objectclass: organization}}
..{{EX:o: Example Company}}
..{{EX:dc: example}}
..{{EX:}}
..{{EX:dn: cn=Manager, dc=example, dc=com}}
..{{EX:objectclass: organizationalRole}}
..{{EX:cn: Manager}}

. Now, you may run {{ldapadd}}(1) to insert these entries into
your directory.

..{{EX:ldapadd -D "cn=Manager, dc=<MY-DOMAIN>, dc=<COM>" -W -f example.ldif}}

. Be sure to replace {{EX:<MY-DOMAIN>}} and {{EX:<COM>}} with the
appropriate domain components of your domain name.  You will be
prompted for the "{{EX:secret}}" specified in {{F:slapd.conf}}. 
For example, for {{EX:example.com}}, use:

..{{EX:ldapadd -x -D "cn=Manager, dc=example, dc=com" -W -f example.ldif}}

. where {{F:example.ldif}} is the file you created above.
..{{EX: }}
. Additional informaton regarding directory creation can be found
in the {{SECT:Database Creation and Maintenance Tools}} chapter of
this document.

.{{S: }}
+{{B:See if it works}}.

. Now we're ready to verify the added entries are in your directory.  
You can use any LDAP client to do this, but our example uses the
{{ldapsearch}}(1) tool.  Remember to replace {{EX:dc=example,dc=com}}
with the correct values for your site:

..{{EX:ldapsearch -x -b 'dc=example,dc=com' '(objectclass=*)'}}

. This command will search for and retrieve every entry in the database.

You are now ready to add more entries using {{ldapadd}}(1) or
another LDAP client, experiment with various configuration options,
backend arrangements, etc.

Note that by default, the {{slapd}}(8) database grants {{read access
to everybody}} excepting the {{super-user}} (as specified by the
{{EX:rootdn}} configuration directive).  It is highly recommended that
you establish controls to restrict access to authorized users.  Access
controls are discussed in the {{SECT:Access Control}} section of the
{{SECT:The slapd Configuration File}} chapter.

The following chapters provide more detailed information on making,
installing, and running {{slapd}}(8).