1 .TH SLAPD-CONFIG 5 "RELEASEDATE" "OpenLDAP LDVERSION"
2 .\" Copyright 1998-2009 The OpenLDAP Foundation All Rights Reserved.
3 .\" Copying restrictions apply. See COPYRIGHT/LICENSE.
6 slapd\-config \- configuration backend to slapd
12 backend manages all of the configuration information for the
14 daemon. This configuration information is also used by the SLAPD tools
26 backend is backward compatible with the older
28 file but provides the ability to change the configuration dynamically
29 at runtime. If slapd is run with only a
31 file dynamic changes will be allowed but they will not persist across
32 a server restart. Dynamic changes are only saved when slapd is running
35 configuration directory.
38 Unlike other backends, there can only be one instance of the
40 backend, and most of its structure is predefined. The root of the
41 database is hardcoded to
43 and this root entry contains
44 global settings for slapd. Multiple child entries underneath the
45 root entry are used to carry various other settings:
49 dynamically loaded modules
55 backend-specific settings
58 database-specific settings
63 entries will only appear in configurations where slapd
64 was built with support for dynamically loaded modules. There can be
65 multiple entries, one for each configured module path. Within each
66 entry there will be values recorded for each module loaded on a
67 given path. These entries have no children.
71 entry contains all of the hardcoded schema elements.
72 The children of this entry contain all user-defined schema elements.
73 In schema that were loaded from include files, the child entry will
74 be named after the include file from which the schema was loaded.
75 Typically the first child in this subtree will be
76 .BR cn=core,cn=schema,cn=config .
79 entries are for storing settings specific to a single
80 backend type (and thus global to all database instances of that type).
81 At present there are no backends that implement settings of this
82 nature, so usually there will not be any olcBackend entries.
85 entries store settings specific to a single database
86 instance. These entries may have
88 child entries corresponding
89 to any overlays configured on the database. The olcDatabase and
90 olcOverlay entries may also have miscellaneous child entries for
91 other settings as needed. There are two special database entries
92 that are predefined - one is an entry for the config database itself,
93 and the other is for the "frontend" database. Settings in the
94 frontend database are inherited by the other databases, unless
95 they are explicitly overridden in a specific database.
97 The specific configuration options available are discussed below in the
98 Global Configuration Options, General Backend Options, and General Database
99 Options. Options are set by defining LDAP attributes with specific values.
100 In general the names of the LDAP attributes are the same as the corresponding
102 keyword, with an "olc" prefix added on.
104 The parser for many of these attributes is the same as used for parsing
105 the slapd.conf keywords. As such, slapd.conf keywords that allow multiple
106 items to be specified on one line, separated by whitespace, will allow
107 multiple items to be specified in one attribute value. However, when
108 reading the attribute via LDAP, the items will be returned as individual
111 Backend-specific options are discussed in the
112 .B slapd\-<backend>(5)
113 manual pages. Refer to the "OpenLDAP Administrator's Guide" for more
114 details on configuring slapd.
115 .SH GLOBAL CONFIGURATION OPTIONS
116 Options described in this section apply to the server as a whole.
117 Arguments that should be replaced by
118 actual text are shown in brackets <>.
120 These options may only be specified in the
122 entry. This entry must have an objectClass of
126 .B olcAllows: <features>
127 Specify a set of features to allow (default none).
129 allows acceptance of LDAPv2 bind requests. Note that
131 does not truly implement LDAPv2 (RFC 1777), now Historic (RFC 3494).
133 allows anonymous bind when credentials are not empty (e.g.
136 allows unauthenticated (anonymous) bind when DN is not empty.
138 allows unauthenticated (anonymous) update operations to be processed
139 (subject to access controls and other administrative limits).
141 allows unauthenticated (anonymous) proxy authorization control to be processed
142 (subject to access controls, authorization and other administrative limits).
144 .B olcArgsFile: <filename>
145 The (absolute) name of a file that will hold the
147 server's command line (program name and options).
149 .B olcAttributeOptions: <option-name>...
150 Define tagging attribute options or option tag/range prefixes.
151 Options must not end with `\-', prefixes must end with `\-'.
152 The `lang\-' prefix is predefined.
154 .B olcAttributeOptions
155 directive, `lang\-' will no longer be defined and you must specify it
156 explicitly if you want it defined.
158 An attribute description with a tagging option is a subtype of that
159 attribute description without the option.
160 Except for that, options defined this way have no special semantics.
161 Prefixes defined this way work like the `lang\-' options:
162 They define a prefix for tagging options starting with the prefix.
163 That is, if you define the prefix `x\-foo\-', you can use the option
165 Furthermore, in a search or compare, a prefix or range name (with
166 a trailing `\-') matches all options starting with that name, as well
167 as the option with the range name sans the trailing `\-'.
168 That is, `x\-foo\-bar\-' matches `x\-foo\-bar' and `x\-foo\-bar\-baz'.
170 RFC 4520 reserves options beginning with `x\-' for private experiments.
171 Other options should be registered with IANA, see RFC 4520 section 3.5.
172 OpenLDAP also has the `binary' option built in, but this is a transfer
173 option, not a tagging option.
175 .B olcAuthzPolicy: <policy>
176 Used to specify which rules to use for Proxy Authorization. Proxy
177 authorization allows a client to authenticate to the server using one
178 user's credentials, but specify a different identity to use for authorization
179 and access control purposes. It essentially allows user A to login as user
180 B, using user A's password.
183 flag disables proxy authorization. This is the default setting.
186 flag will use rules in the
188 attribute of the authorization DN.
191 flag will use rules in the
193 attribute of the authentication DN.
196 flag, an alias for the deprecated value of
198 will allow any of the above, whatever succeeds first (checked in
204 flag requires both authorizations to succeed.
207 The rules are mechanisms to specify which identities are allowed
208 to perform proxy authorization.
211 attribute in an entry specifies which other users
212 are allowed to proxy login to this entry. The
215 an entry specifies which other users this user can authorize as. Use of
218 abused if users are allowed to write arbitrary values to this attribute.
221 attribute must be protected with ACLs such that
222 only privileged users can modify it.
229 or a set of identities; it can take five forms:
232 .B ldap:///<base>??[<scope>]?<filter>
235 .B dn[.<dnstyle>]:<pattern>
238 .B u[<mech>[<realm>]]:<pattern>
241 .B group[/objectClass[/attributeType]]:<pattern>
248 .B <dnstyle>:={exact|onelevel|children|subtree|regex}
251 The first form is a valid LDAP
259 portions must be absent, so that the search occurs locally on either
265 with the optional style modifiers
271 for exact, onelevel, children and subtree matches, which cause
273 to be normalized according to the DN normalization rules, or the special
275 style, which causes the
277 to be treated as a POSIX (''extended'') regular expression, as
284 means any non-anonymous DN.
285 The third form is a SASL
287 with the optional fields
291 that allow to specify a SASL
293 and eventually a SASL
295 for those mechanisms that support one.
296 The need to allow the specification of a mechanism is still debated,
297 and users are strongly discouraged to rely on this possibility.
298 The fourth form is a group specification, consisting of the keyword
300 optionally followed by the specification of the group
306 is searched with base scope, and in case of match, the values of the
309 are searched for the asserted DN.
310 For backwards compatibility, if no identity type is provided, i.e. only
314 is assumed; as a consequence,
316 is subjected to DN normalization.
317 Since the interpretation of
321 can impact security, users are strongly encouraged
322 to explicitly set the type of identity specification that is being used.
323 A subset of these rules can be used as third arg in the
325 statement (see below); significantly, the
332 .B olcAuthzRegexp: <match> <replace>
333 Used by the authentication framework to convert simple user names,
334 such as provided by SASL subsystem, to an LDAP DN used for
335 authorization purposes. Note that the resultant DN need not refer
336 to an existing entry to be considered valid. When an authorization
337 request is received from the SASL subsystem, the SASL
342 are taken, when available, and combined into a name of the form
346 .B UID=<username>[[,CN=<realm>],CN=<mechanism>],CN=auth
349 This name is then compared against the
351 POSIX (''extended'') regular expression, and if the match is successful,
352 the name is replaced with the
354 string. If there are wildcard strings in the
356 regular expression that are enclosed in parenthesis, e.g.
362 then the portion of the name that matched the wildcard will be stored
363 in the numbered placeholder variable $1. If there are other wildcard strings
364 in parenthesis, the matching strings will be in $2, $3, etc. up to $9. The
365 placeholders can then be used in the
370 .B UID=$1,OU=Accounts,DC=example,DC=com
373 The replaced name can be either a DN, i.e. a string prefixed by "dn:",
375 If the latter, the server will use the URI to search its own database(s)
376 and, if the search returns exactly one entry, the name is
377 replaced by the DN of that entry. The LDAP URI must have no
378 hostport, attrs, or extensions components, but the filter is mandatory,
382 .B ldap:///OU=Accounts,DC=example,DC=com??one?(UID=$1)
385 The protocol portion of the URI must be strictly
387 Note that this search is subject to access controls. Specifically,
388 the authentication identity must have "auth" access in the subject.
392 values can be specified to allow for multiple matching
393 and replacement patterns. The matching patterns are checked in the order they
394 appear in the attribute, stopping at the first successful match.
397 .\"Because the plus sign + is a character recognized by the regular expression engine,
398 .\"and it will appear in names that include a REALM, be careful to escape the
399 .\"plus sign with a backslash \\+ to remove the character's special meaning.
402 .B olcConcurrency: <integer>
403 Specify a desired level of concurrency. Provided to the underlying
404 thread system as a hint. The default is not to provide any hint. This setting
405 is only meaningful on some platforms where there is not a one to one
406 correspondence between user threads and kernel threads.
408 .B olcConnMaxPending: <integer>
409 Specify the maximum number of pending requests for an anonymous session.
410 If requests are submitted faster than the server can process them, they
411 will be queued up to this limit. If the limit is exceeded, the session
412 is closed. The default is 100.
414 .B olcConnMaxPendingAuth: <integer>
415 Specify the maximum number of pending requests for an authenticated session.
418 .B olcDisallows: <features>
419 Specify a set of features to disallow (default none).
421 disables acceptance of anonymous bind requests. Note that this setting
422 does not prohibit anonymous directory access (See "require authc").
424 disables simple (bind) authentication.
426 disables forcing session to anonymous status (see also
428 upon StartTLS operation receipt.
430 disallows the StartTLS operation if authenticated (see also
433 .B olcGentleHUP: { TRUE | FALSE }
434 A SIGHUP signal will only cause a 'gentle' shutdown-attempt:
436 will stop listening for new connections, but will not close the
437 connections to the current clients. Future write operations return
438 unwilling-to-perform, though. Slapd terminates when all clients
439 have closed their connections (if they ever do), or - as before -
440 if it receives a SIGTERM signal. This can be useful if you wish to
441 terminate the server and start a new
444 .B with another database,
445 without disrupting the currently active clients.
446 The default is FALSE. You may wish to use
448 along with this option.
450 .B olcIdleTimeout: <integer>
451 Specify the number of seconds to wait before forcibly closing
452 an idle client connection. A setting of 0 disables this
453 feature. The default is 0. You may also want to set the
457 .B olcIndexIntLen: <integer>
458 Specify the key length for ordered integer indices. The most significant
459 bytes of the binary integer will be used for index keys. The default
460 value is 4, which provides exact indexing for 31 bit values.
461 A floating point representation is used to index too large values.
463 .B olcIndexSubstrIfMaxlen: <integer>
464 Specify the maximum length for subinitial and subfinal indices. Only
465 this many characters of an attribute value will be processed by the
466 indexing functions; any excess characters are ignored. The default is 4.
468 .B olcIndexSubstrIfMinlen: <integer>
469 Specify the minimum length for subinitial and subfinal indices. An
470 attribute value must have at least this many characters in order to be
471 processed by the indexing functions. The default is 2.
473 .B olcIndexSubstrAnyLen: <integer>
474 Specify the length used for subany indices. An attribute value must have
475 at least this many characters in order to be processed. Attribute values
476 longer than this length will be processed in segments of this length. The
477 default is 4. The subany index will also be used in subinitial and
478 subfinal index lookups when the filter string is longer than the
479 .I olcIndexSubstrIfMaxlen
482 .B olcIndexSubstrAnyStep: <integer>
483 Specify the steps used in subany index lookups. This value sets the offset
484 for the segments of a filter string that are processed for a subany index
485 lookup. The default is 2. For example, with the default values, a search
486 using this filter "cn=*abcdefgh*" would generate index lookups for
487 "abcd", "cdef", and "efgh".
490 Note: Indexing support depends on the particular backend in use. Also,
491 changing these settings will generally require deleting any indices that
492 depend on these parameters and recreating them with
496 .B olcLocalSSF: <SSF>
497 Specifies the Security Strength Factor (SSF) to be given local LDAP sessions,
498 such as those to the ldapi:// listener. For a description of SSF values,
500 .BR olcSaslSecProps 's
502 option description. The default is 71.
504 .B olcLogFile: <filename>
505 Specify a file for recording debug log messages. By default these messages
506 only go to stderr and are not recorded anywhere else. Specifying a logfile
507 copies messages to both stderr and the logfile.
509 .B olcLogLevel: <integer> [...]
510 Specify the level at which debugging statements and operation
511 statistics should be syslogged (currently logged to the
513 LOG_LOCAL4 facility).
514 They must be considered subsystems rather than increasingly verbose
516 Some messages with higher priority are logged regardless
517 of the configured loglevel as soon as any logging is configured.
518 Log levels are additive, and available levels are:
529 debug packet handling
533 heavy trace debugging (function args)
537 connection management
541 print out packets sent and received
545 search filter processing
549 configuration file processing
553 access control list processing
557 stats log connections/operations/results
561 stats log entries sent
565 print communication with shell backends
577 \"data indexing (unused)
585 only messages that get logged whatever log level is set
588 The desired log level can be input as a single integer that combines
589 the (ORed) desired levels, both in decimal or in hexadecimal notation,
590 as a list of integers (that are ORed internally),
591 or as a list of the names that are shown between brackets, such that
597 olcLogLevel: 0x80 0x1
598 olcLogLevel: acl trace
604 can be used as a shortcut to enable logging at all levels (equivalent to \-1).
607 or the equivalent integer representation, causes those messages
608 that are logged regardless of the configured olcLogLevel to be logged.
609 In fact, if no olcLogLevel (or a 0 level) is defined, no logging occurs,
612 level is required to have high priority messages logged.
615 .B olcPasswordCryptSaltFormat: <format>
616 Specify the format of the salt passed to
618 when generating {CRYPT} passwords (see
619 .BR olcPasswordHash )
620 during processing of LDAP Password Modify Extended Operations (RFC 3062).
622 This string needs to be in
624 format and may include one (and only one) %s conversion.
625 This conversion will be substituted with a string of random
626 characters from [A\-Za\-z0\-9./]. For example, "%.2s"
627 provides a two character salt and "$1$%.8s" tells some
628 versions of crypt(3) to use an MD5 algorithm and provides
629 8 random characters of salt. The default is "%s", which
630 provides 31 characters of salt.
632 .B olcPidFile: <filename>
633 The (absolute) name of a file that will hold the
635 server's process ID (see
638 .B olcPluginLogFile: <filename>
639 The ( absolute ) name of a file that will contain log
646 .B olcReferral: <url>
647 Specify the referral to pass back when
649 cannot find a local database to handle a request.
650 If multiple values are specified, each url is provided.
652 .B olcReverseLookup: TRUE | FALSE
653 Enable/disable client name unverified reverse lookup (default is
655 if compiled with \-\-enable\-rlookups).
657 .B olcRootDSE: <file>
658 Specify the name of an LDIF(5) file containing user defined attributes
659 for the root DSE. These attributes are returned in addition to the
660 attributes normally produced by slapd.
662 The root DSE is an entry with information about the server and its
663 capabilities, in operational attributes.
664 It has the empty DN, and can be read with e.g.:
666 ldapsearch \-x \-b "" \-s base "+"
668 See RFC 4512 section 5.1 for details.
670 .B olcSaslAuxprops: <plugin> [...]
671 Specify which auxprop plugins to use for authentication lookups. The
672 default is empty, which just uses slapd's internal support. Usually
673 no other auxprop plugins are needed.
675 .B olcSaslHost: <fqdn>
676 Used to specify the fully qualified domain name used for SASL processing.
678 .B olcSaslRealm: <realm>
679 Specify SASL realm. Default is empty.
681 .B olcSaslSecProps: <properties>
682 Used to specify Cyrus SASL security properties.
685 flag (without any other properties) causes the flag properties
686 default, "noanonymous,noplain", to be cleared.
689 flag disables mechanisms susceptible to simple passive attacks.
692 flag disables mechanisms susceptible to active attacks.
695 flag disables mechanisms susceptible to passive dictionary attacks.
698 flag disables mechanisms which support anonymous login.
701 flag require forward secrecy between sessions.
704 require mechanisms which pass client credentials (and allow
705 mechanisms which can pass credentials to do so).
708 property specifies the minimum acceptable
709 .I security strength factor
710 as an integer approximate to effective key length used for
711 encryption. 0 (zero) implies no protection, 1 implies integrity
712 protection only, 56 allows DES or other weak ciphers, 112
713 allows triple DES and other strong ciphers, 128 allows RC4,
714 Blowfish and other modern strong ciphers. The default is 0.
717 property specifies the maximum acceptable
718 .I security strength factor
719 as an integer (see minssf description). The default is INT_MAX.
722 property specifies the maximum security layer receive buffer
723 size allowed. 0 disables security layers. The default is 65536.
725 .B olcServerID: <integer> [<URL>]
726 Specify an integer ID from 0 to 4095 for this server. These IDs are
727 required when using multimaster replication and each master must have a
728 unique ID. Note that this requirement also applies to separate masters
729 contributing to a glued set of databases.
730 If the URL is provided, this directive may be specified
731 multiple times, providing a complete list of participating servers
732 and their IDs. The fully qualified hostname of each server should be
733 used in the supplied URLs. The IDs are used in the "replica id" field
734 of all CSNs generated by the specified server. The default value is zero.
738 olcServerID: 1 ldap://ldap1.example.com
739 olcServerID: 2 ldap://ldap2.example.com
742 .B olcSockbufMaxIncoming: <integer>
743 Specify the maximum incoming LDAP PDU size for anonymous sessions.
744 The default is 262143.
746 .B olcSockbufMaxIncomingAuth: <integer>
747 Specify the maximum incoming LDAP PDU size for authenticated sessions.
748 The default is 4194303.
750 .B olcThreads: <integer>
751 Specify the maximum size of the primary thread pool.
752 The default is 16; the minimum value is 2.
754 .B olcToolThreads: <integer>
755 Specify the maximum number of threads to use in tool mode.
756 This should not be greater than the number of CPUs in the system.
759 .B olcWriteTimeout: <integer>
760 Specify the number of seconds to wait before forcibly closing
761 a connection with an outstanding write. This allows recovery from
762 various network hang conditions. A setting of 0 disables this
763 feature. The default is 0.
767 is built with support for Transport Layer Security, there are more options
770 .B olcTLSCipherSuite: <cipher-suite-spec>
771 Permits configuring what ciphers will be accepted and the preference order.
772 <cipher-suite-spec> should be a cipher specification for OpenSSL. Example:
774 olcTLSCipherSuite: HIGH:MEDIUM:+SSLv2
776 To check what ciphers a given spec selects in OpenSSL, use:
779 openssl ciphers \-v <cipher-suite-spec>
782 To obtain the list of ciphers in GNUtls use:
788 .B olcTLSCACertificateFile: <filename>
789 Specifies the file that contains certificates for all of the Certificate
794 .B olcTLSCACertificatePath: <path>
795 Specifies the path of a directory that contains Certificate Authority
796 certificates in separate individual files. Usually only one of this
797 or the olcTLSCACertificateFile is defined. If both are specified, both
798 locations will be used. This directive is not supported
801 .B olcTLSCertificateFile: <filename>
802 Specifies the file that contains the
806 .B olcTLSCertificateKeyFile: <filename>
807 Specifies the file that contains the
809 server private key that matches the certificate stored in the
810 .B olcTLSCertificateFile
811 file. If the private key is protected with a password, the password must
812 be manually typed in when slapd starts. Usually the private key is not
813 protected with a password, to allow slapd to start without manual
815 it is of critical importance that the file is protected carefully.
817 .B olcTLSDHParamFile: <filename>
818 This directive specifies the file that contains parameters for Diffie-Hellman
819 ephemeral key exchange. This is required in order to use a DSA certificate on
820 the server. If multiple sets of parameters are present in the file, all of
821 them will be processed. Note that setting this option may also enable
822 Anonymous Diffie-Hellman key exchanges in certain non-default cipher suites.
823 You should append "!ADH" to your cipher suites if you have changed them
824 from the default, otherwise no certificate exchanges or verification will
825 be done. When using GNUtls these parameters are always generated randomly
826 so this directive is ignored.
828 .B olcTLSRandFile: <filename>
829 Specifies the file to obtain random bits from when /dev/[u]random
830 is not available. Generally set to the name of the EGD/PRNGD socket.
831 The environment variable RANDFILE can also be used to specify the filename.
832 This directive is ignored with GNUtls.
834 .B olcTLSVerifyClient: <level>
835 Specifies what checks to perform on client certificates in an
836 incoming TLS session, if any.
839 can be specified as one of the following keywords:
845 will not ask the client for a certificate.
848 The client certificate is requested. If no certificate is provided,
849 the session proceeds normally. If a bad certificate is provided,
850 it will be ignored and the session proceeds normally.
853 The client certificate is requested. If no certificate is provided,
854 the session proceeds normally. If a bad certificate is provided,
855 the session is immediately terminated.
857 .B demand | hard | true
858 These keywords are all equivalent, for compatibility reasons.
859 The client certificate is requested. If no certificate is provided,
860 or a bad certificate is provided, the session is immediately terminated.
862 Note that a valid client certificate is required in order to use the
863 SASL EXTERNAL authentication mechanism with a TLS session. As such,
865 .B olcTLSVerifyClient
866 setting must be chosen to enable SASL EXTERNAL authentication.
869 .B olcTLSCRLCheck: <level>
870 Specifies if the Certificate Revocation List (CRL) of the CA should be
871 used to verify if the client certificates have not been revoked. This
873 .B olcTLSCACertificatePath
874 parameter to be set. This parameter is ignored with GNUtls.
876 can be specified as one of the following keywords:
880 No CRL checks are performed
883 Check the CRL of the peer certificate
886 Check the CRL for a whole certificate chain
889 .B olcTLSCRLFile: <filename>
890 Specifies a file containing a Certificate Revocation List to be used
891 for verifying that certificates have not been revoked. This parameter
892 is only valid when using GNUtls.
893 .SH DYNAMIC MODULE OPTIONS
896 is compiled with \-\-enable\-modules then the module-related entries will
897 be available. These entries are named
898 .B cn=module{x},cn=config
900 must have the olcModuleList objectClass. One entry should be created
903 Normally the config engine generates the "{x}" index in the RDN
904 automatically, so it can be omitted when initially loading these entries.
906 .B olcModuleLoad: <filename>
907 Specify the name of a dynamically loadable module to load. The filename
908 may be an absolute path name or a simple filename. Non-absolute names
909 are searched for in the directories specified by the
913 .B olcModulePath: <pathspec>
914 Specify a list of directories to search for loadable modules. Typically
915 the path is colon-separated but this depends on the operating system.
916 The default is MODULEDIR, which is where the standard OpenLDAP install
917 will place its modules.
919 Schema definitions are created as entries in the
920 .B cn=schema,cn=config
921 subtree. These entries must have the olcSchemaConfig objectClass.
922 As noted above, the actual
923 .B cn=schema,cn=config
924 entry is predefined and any values specified for it are ignored.
928 .B olcAttributetypes: "(\ <oid>\
930 [DESC\ <description>]\
939 [NO\-USER\-MODIFICATION]\
940 [USAGE\ <attributeUsage>]\ )"
942 Specify an attribute type using the LDAPv3 syntax defined in RFC 4512.
943 The slapd parser extends the RFC 4512 definition by allowing string
944 forms as well as numeric OIDs to be used for the attribute OID and
945 attribute syntax OID.
947 .B olcObjectIdentifier
953 .B olcDitContentRules: "(\ <oid>\
955 [DESC\ <description>]\
962 Specify an DIT Content Rule using the LDAPv3 syntax defined in RFC 4512.
963 The slapd parser extends the RFC 4512 definition by allowing string
964 forms as well as numeric OIDs to be used for the attribute OID and
965 attribute syntax OID.
967 .B olcObjectIdentifier
973 .B olcObjectClasses: "(\ <oid>\
975 [DESC\ <description>]\
978 [{ ABSTRACT | STRUCTURAL | AUXILIARY }]\
979 [MUST\ <oids>] [MAY\ <oids>] )"
981 Specify an objectclass using the LDAPv3 syntax defined in RFC 4512.
982 The slapd parser extends the RFC 4512 definition by allowing string
983 forms as well as numeric OIDs to be used for the object class OID.
987 description.) Object classes are "STRUCTURAL" by default.
990 .B olcObjectIdentifier: <name> "{ <oid> | <name>[:<suffix>] }"
991 Define a string name that equates to the given OID. The string can be used
992 in place of the numeric OID in objectclass and attribute definitions. The
993 name can also be used with a suffix of the form ":xx" in which case the
994 value "oid.xx" will be used.
996 .SH GENERAL BACKEND OPTIONS
997 Options in these entries only apply to the configuration of a single
998 type of backend. All backends may support this class of options.
999 The entry must be named
1000 .B olcBackend=<databasetype>,cn=config
1001 and must have the olcBackendConfig objectClass.
1019 At present, no backend implements any options of this type.
1021 .SH DATABASE OPTIONS
1022 Database options are set in entries named
1023 .B olcDatabase={x}<databasetype>,cn=config
1024 and must have the olcDatabaseConfig objectClass. Normally the config
1025 engine generates the "{x}" index in the RDN automatically, so it
1026 can be omitted when initially loading these entries.
1028 The special frontend database is always numbered "{\-1}" and the config
1029 database is always numbered "{0}".
1031 .SH GLOBAL DATABASE OPTIONS
1032 Options in this section may be set in the special "frontend" database
1033 and inherited in all the other databases. These options may be altered
1034 by further settings in each specific database. The frontend entry must
1036 .B olcDatabase=frontend,cn=config
1037 and must have the olcFrontendConfig objectClass.
1039 .B olcAccess: to <what> "[ by <who> <access> <control> ]+"
1040 Grant access (specified by <access>) to a set of entries and/or
1041 attributes (specified by <what>) by one or more requestors (specified
1043 If no access controls are present, the default policy
1044 allows anyone and everyone to read anything but restricts
1045 updates to rootdn. (e.g., "olcAccess: to * by * read").
1047 .BR slapd.access (5)
1048 and the "OpenLDAP Administrator's Guide" for details.
1050 Access controls set in the frontend are appended to any access
1051 controls set on the specific databases.
1052 The rootdn of a database can always read and write EVERYTHING
1055 Extra special care must be taken with the access controls on the
1056 config database. Unlike other databases, the default policy for the
1057 config database is to only allow access to the rootdn. Regular users
1058 should not have read access, and write access should be granted very
1059 carefully to privileged administrators.
1062 .B olcDefaultSearchBase: <dn>
1063 Specify a default search base to use when client submits a
1064 non-base search request with an empty base DN.
1065 Base scoped search requests with an empty base DN are not affected.
1066 This setting is only allowed in the frontend entry.
1068 .B olcPasswordHash: <hash> [<hash>...]
1069 This option configures one or more hashes to be used in generation of user
1070 passwords stored in the userPassword attribute during processing of
1071 LDAP Password Modify Extended Operations (RFC 3062).
1072 The <hash> must be one of
1086 use the SHA-1 algorithm (FIPS 160-1), the latter with a seed.
1091 use the MD5 algorithm (RFC 1321), the latter with a seed.
1098 indicates that the new password should be
1099 added to userPassword as clear text.
1101 Note that this option does not alter the normal user applications
1102 handling of userPassword during LDAP Add, Modify, or other LDAP operations.
1103 This setting is only allowed in the frontend entry.
1105 .B olcReadOnly: TRUE | FALSE
1106 This option puts the database into "read-only" mode. Any attempts to
1107 modify the database will return an "unwilling to perform" error. By
1108 default, olcReadOnly is FALSE. Note that when this option is set
1109 TRUE on the frontend, it cannot be reset without restarting the
1110 server, since further writes to the config database will be rejected.
1112 .B olcRequires: <conditions>
1113 Specify a set of conditions to require (default none).
1114 The directive may be specified globally and/or per-database;
1115 databases inherit global conditions, so per-database specifications
1118 requires bind operation prior to directory operations.
1120 requires session to be using LDAP version 3.
1122 requires authentication prior to directory operations.
1124 requires SASL authentication prior to directory operations.
1126 requires strong authentication prior to directory operations.
1127 The strong keyword allows protected "simple" authentication
1128 as well as SASL authentication.
1130 may be used to require no conditions (useful to clear out globally
1131 set conditions within a particular database); it must occur first
1132 in the list of conditions.
1134 .B olcRestrict: <oplist>
1135 Specify a list of operations that are restricted.
1136 Restrictions on a specific database override any frontend setting.
1137 Operations can be any of
1142 .BR extended[=<OID>] ,
1146 or the special pseudo-operations
1150 which respectively summarize read and write operations.
1154 .I olcReadOnly: TRUE
1158 keyword allows to indicate the OID of the specific operation
1161 .B olcSchemaDN: <dn>
1162 Specify the distinguished name for the subschema subentry that
1163 controls the entries on this server. The default is "cn=Subschema".
1165 .B olcSecurity: <factors>
1166 Specify a set of security strength factors (separated by white space)
1168 .BR olcSaslSecprops 's
1170 option for a description of security strength factors).
1171 The directive may be specified globally and/or per-database.
1173 specifies the overall security strength factor.
1175 specifies the transport security strength factor.
1177 specifies the TLS security strength factor.
1179 specifies the SASL security strength factor.
1181 specifies the overall security strength factor to require for
1183 .B update_transport=<n>
1184 specifies the transport security strength factor to require for
1187 specifies the TLS security strength factor to require for
1190 specifies the SASL security strength factor to require for
1193 specifies the security strength factor required for
1195 username/password authentication.
1198 factor is measure of security provided by the underlying transport,
1199 e.g. ldapi:// (and eventually IPSEC). It is not normally used.
1201 .B olcSizeLimit: {<integer>|unlimited}
1203 .B olcSizeLimit: size[.{soft|hard|unchecked}]=<integer> [...]
1204 Specify the maximum number of entries to return from a search operation.
1205 The default size limit is 500.
1208 to specify no limits.
1209 The second format allows a fine grain setting of the size limits.
1210 Extra args can be added in the same value or as additional values.
1213 for an explanation of the different flags.
1215 .B olcSortVals: <attr> [...]
1216 Specify a list of multi-valued attributes whose values will always
1217 be maintained in sorted order. Using this option will allow Modify,
1218 Compare, and filter evaluations on these attributes to be performed
1219 more efficiently. The resulting sort order depends on the
1220 attributes' syntax and matching rules and may not correspond to
1221 lexical order or any other recognizable order.
1222 This setting is only allowed in the frontend entry.
1224 .B olcTimeLimit: {<integer>|unlimited}
1226 .B olcTimeLimit: time[.{soft|hard}]=<integer> [...]
1227 Specify the maximum number of seconds (in real time)
1229 will spend answering a search request. The default time limit is 3600.
1232 to specify no limits.
1233 The second format allows a fine grain setting of the time limits.
1234 Extra args can be added in the same value or as additional values.
1237 for an explanation of the different flags.
1239 .SH GENERAL DATABASE OPTIONS
1240 Options in this section only apply to the specific database for
1241 which they are defined. They are supported by every
1242 type of backend. All of the Global Database Options may also be
1245 .B olcAddContentAcl: TRUE | FALSE
1246 Controls whether Add operations will perform ACL checks on
1247 the content of the entry being added. This check is off
1249 .BR slapd.access (5)
1250 manual page for more details on ACL requirements for
1253 .B olcHidden: TRUE | FALSE
1254 Controls whether the database will be used to answer
1255 queries. A database that is hidden will never be
1256 selected to answer any queries, and any suffix configured
1257 on the database will be ignored in checks for conflicts
1258 with other databases. By default, olcHidden is FALSE.
1260 .B olcLastMod: TRUE | FALSE
1263 will automatically maintain the
1264 modifiersName, modifyTimestamp, creatorsName, and
1265 createTimestamp attributes for entries. It also controls
1266 the entryCSN and entryUUID attributes, which are needed
1267 by the syncrepl provider. By default, olcLastMod is TRUE.
1269 .B olcLimits: <selector> <limit> [<limit> [...]]
1270 Specify time and size limits based on the operation's initiator or
1278 anonymous | users | [<dnspec>=]<pattern> | group[/oc[/at]]=<pattern>
1284 <dnspec> ::= dn[.<type>][.<style>]
1286 <type> ::= self | this
1288 <style> ::= exact | base | onelevel | subtree | children | regex | anonymous
1293 is the default and means the bound user, while
1295 means the base DN of the operation.
1298 matches all unauthenticated clients.
1301 matches all authenticated clients;
1304 dn pattern is assumed unless otherwise specified by qualifying
1305 the (optional) key string
1311 (which are synonyms), to require an exact match; with
1313 to require exactly one level of depth match; with
1315 to allow any level of depth match, including the exact match; with
1317 to allow any level of depth match, not including the exact match;
1319 explicitly requires the (default) match based on POSIX (''extended'')
1320 regular expression pattern.
1323 matches unbound operations; the
1326 The same behavior is obtained by using the
1333 with the optional objectClass
1339 sets the limits for any DN listed in the values of the
1345 group objectClass (default
1347 whose DN exactly matches
1350 The currently supported limits are
1355 The syntax for time limits is
1356 .BR time[.{soft|hard}]=<integer> ,
1359 is the number of seconds slapd will spend answering a search request.
1360 If no time limit is explicitly requested by the client, the
1362 limit is used; if the requested time limit exceeds the
1365 .\".I "Administrative limit exceeded"
1366 .\"error is returned.
1367 limit, the value of the limit is used instead.
1370 limit is set to the keyword
1372 the soft limit is used in either case; if it is set to the keyword
1374 no hard limit is enforced.
1375 Explicit requests for time limits smaller or equal to the
1378 If no limit specifier is set, the value is assigned to the
1384 to preserve the original behavior.
1386 The syntax for size limits is
1387 .BR size[.{soft|hard|unchecked}]=<integer> ,
1390 is the maximum number of entries slapd will return answering a search
1392 If no size limit is explicitly requested by the client, the
1394 limit is used; if the requested size limit exceeds the
1397 .\".I "Administrative limit exceeded"
1398 .\"error is returned.
1399 limit, the value of the limit is used instead.
1402 limit is set to the keyword
1404 the soft limit is used in either case; if it is set to the keyword
1406 no hard limit is enforced.
1407 Explicit requests for size limits smaller or equal to the
1412 specifier sets a limit on the number of candidates a search request is allowed
1414 The rationale behind it is that searches for non-properly indexed
1415 attributes may result in large sets of candidates, which must be
1418 to determine whether they match the search filter or not.
1421 limit provides a means to drop such operations before they are even
1423 If the selected candidates exceed the
1425 limit, the search will abort with
1426 .IR "Unwilling to perform" .
1427 If it is set to the keyword
1429 no limit is applied (the default).
1432 the search is not even performed; this can be used to disallow searches
1433 for a specific set of users.
1434 If no limit specifier is set, the value is assigned to the
1440 to preserve the original behavior.
1442 In case of no match, the global limits are used.
1443 The default values are the same as for
1452 control is requested, the
1454 size limit is used by default, because the request of a specific page size
1455 is considered an explicit request for a limitation on the number
1456 of entries to be returned.
1457 However, the size limit applies to the total count of entries returned within
1458 the search, and not to a single page.
1459 Additional size limits may be enforced; the syntax is
1460 .BR size.pr={<integer>|noEstimate|unlimited} ,
1463 is the max page size if no explicit limit is set; the keyword
1465 inhibits the server from returning an estimate of the total number
1466 of entries that might be returned
1467 (note: the current implementation does not return any estimate).
1470 indicates that no limit is applied to the pagedResults control page size.
1472 .B size.prtotal={<integer>|unlimited|disabled}
1473 allows to set a limit on the total number of entries that a pagedResults
1474 control allows to return.
1475 By default it is set to the
1480 is the max number of entries that the whole search with pagedResults control
1484 to allow unlimited number of entries to be returned, e.g. to allow
1485 the use of the pagedResults control as a means to circumvent size
1486 limitations on regular searches; the keyword
1488 disables the control, i.e. no paged results can be returned.
1489 Note that the total number of entries returned when the pagedResults control
1490 is requested cannot exceed the
1492 size limit of regular searches unless extended by the
1497 .B olcMaxDerefDepth: <depth>
1498 Specifies the maximum number of aliases to dereference when trying to
1499 resolve an entry, used to avoid infinite alias loops. The default is 15.
1501 .B olcMirrorMode: TRUE | FALSE
1502 This option puts a replica database into "mirror" mode. Update
1503 operations will be accepted from any user, not just the updatedn. The
1504 database must already be configured as syncrepl consumer
1505 before this keyword may be set. This mode also requires a
1507 (see above) to be configured.
1508 By default, this setting is FALSE.
1510 .B olcPlugin: <plugin_type> <lib_path> <init_function> [<arguments>]
1511 Configure a SLAPI plugin. See the
1512 .BR slapd.plugin (5)
1513 manpage for more details.
1516 Specify the distinguished name that is not subject to access control
1517 or administrative limit restrictions for operations on this database.
1518 This DN may or may not be associated with an entry. An empty root
1519 DN (the default) specifies no root access is to be granted. It is
1520 recommended that the rootdn only be specified when needed (such as
1521 when initially populating a database). If the rootdn is within
1522 a namingContext (suffix) of the database, a simple bind password
1523 may also be provided using the
1525 directive. Note that the rootdn is always needed when using syncrepl.
1527 .B olcRootPW: <password>
1528 Specify a password (or hash of the password) for the rootdn. The
1529 password can only be set if the rootdn is within the namingContext
1530 (suffix) of the database.
1531 This option accepts all RFC 2307 userPassword formats known to
1534 description) as well as cleartext.
1536 may be used to generate a hash of a password. Cleartext
1537 and \fB{CRYPT}\fP passwords are not recommended. If empty
1538 (the default), authentication of the root DN is by other means
1539 (e.g. SASL). Use of SASL is encouraged.
1541 .B olcSubordinate: [TRUE | FALSE | advertise]
1542 Specify that the current backend database is a subordinate of another
1543 backend database. A subordinate database may have only one suffix. This
1544 option may be used to glue multiple databases into a single namingContext.
1545 If the suffix of the current database is within the namingContext of a
1546 superior database, searches against the superior database will be
1547 propagated to the subordinate as well. All of the databases
1548 associated with a single namingContext should have identical rootdns.
1549 Behavior of other LDAP operations is unaffected by this setting. In
1550 particular, it is not possible to use moddn to move an entry from
1551 one subordinate to another subordinate within the namingContext.
1553 If the optional \fBadvertise\fP flag is supplied, the naming context of
1554 this database is advertised in the root DSE. The default is to hide this
1555 database context, so that only the superior context is visible.
1562 are used on the superior database, any glued subordinates that support
1563 these tools are opened as well.
1565 Databases that are glued together should usually be configured with the
1566 same indices (assuming they support indexing), even for attributes that
1567 only exist in some of these databases. In general, all of the glued
1568 databases should be configured as similarly as possible, since the intent
1569 is to provide the appearance of a single directory.
1571 Note that the subordinate functionality is implemented internally
1572 by the \fIglue\fP overlay and as such its behavior will interact with other
1573 overlays in use. By default, the glue overlay is automatically configured as
1574 the last overlay on the superior database. Its position on the database
1575 can be explicitly configured by setting an \fBoverlay glue\fP directive
1576 at the desired position. This explicit configuration is necessary e.g.
1577 when using the \fIsyncprov\fP overlay, which needs to follow \fIglue\fP
1578 in order to work over all of the glued databases. E.g.
1581 dn: olcDatabase={1}bdb,cn=config
1582 olcSuffix: dc=example,dc=com
1585 dn: olcOverlay={0}glue,olcDatabase={1}bdb,cn=config
1588 dn: olcOverlay={1}syncprov,olcDatabase={1}bdb,cn=config
1592 See the Overlays section below for more details.
1594 .B olcSuffix: <dn suffix>
1595 Specify the DN suffix of queries that will be passed to this
1596 backend database. Multiple suffix lines can be given and at least one is
1597 required for each database definition.
1599 If the suffix of one database is "inside" that of another, the database
1600 with the inner suffix must come first in the configuration file.
1601 You may also want to glue such databases together with the
1606 .B olcSyncrepl: rid=<replica ID>
1607 .B provider=ldap[s]://<hostname>[:port]
1608 .B searchbase=<base DN>
1609 .B [type=refreshOnly|refreshAndPersist]
1610 .B [interval=dd:hh:mm:ss]
1611 .B [retry=[<retry interval> <# of retries>]+]
1612 .B [filter=<filter str>]
1613 .B [scope=sub|one|base|subord]
1614 .B [attrs=<attr list>]
1615 .B [exattrs=<attr list>]
1617 .B [sizelimit=<limit>]
1618 .B [timelimit=<limit>]
1619 .B [schemachecking=on|off]
1620 .B [network\-timeout=<seconds>]
1621 .B [timeout=<seconds>]
1622 .B [bindmethod=simple|sasl]
1624 .B [saslmech=<mech>]
1625 .B [authcid=<identity>]
1626 .B [authzid=<identity>]
1627 .B [credentials=<passwd>]
1629 .B [secprops=<properties>]
1630 .B [starttls=yes|critical]
1631 .B [tls_cert=<file>]
1633 .B [tls_cacert=<file>]
1634 .B [tls_cacertdir=<path>]
1635 .B [tls_reqcert=never|allow|try|demand]
1636 .B [tls_ciphersuite=<ciphers>]
1637 .B [tls_crlcheck=none|peer|all]
1638 .B [logbase=<base DN>]
1639 .B [logfilter=<filter str>]
1640 .B [syncdata=default|accesslog|changelog]
1642 Specify the current database as a replica which is kept up-to-date with the
1643 master content by establishing the current
1645 as a replication consumer site running a
1648 The replica content is kept synchronized to the master content using
1649 the LDAP Content Synchronization protocol. Refer to the
1650 "OpenLDAP Administrator's Guide" for detailed information on
1651 setting up a replicated
1653 directory service using the
1658 identifies the current
1660 directive within the replication consumer site.
1661 It is a non-negative integer having no more than three digits.
1664 specifies the replication provider site containing the master content
1665 as an LDAP URI. If <port> is not given, the standard LDAP port number
1666 (389 or 636) is used.
1670 replica is defined using a search
1671 specification as its result set. The consumer
1673 will send search requests to the provider
1675 according to the search specification. The search specification includes
1676 .B searchbase, scope, filter, attrs, attrsonly, sizelimit,
1679 parameters as in the normal search specification. The
1681 option may also be used to specify attributes that should be omitted
1682 from incoming entries.
1683 The \fBscope\fP defaults to \fBsub\fP, the \fBfilter\fP defaults to
1684 \fB(objectclass=*)\fP, and there is no default \fBsearchbase\fP. The
1685 \fBattrs\fP list defaults to \fB"*,+"\fP to return all user and operational
1686 attributes, and \fBattrsonly\fP and \fBexattrs\fP are unset by default.
1687 The \fBsizelimit\fP and \fBtimelimit\fP only
1688 accept "unlimited" and positive integers, and both default to "unlimited".
1689 Note, however, that any provider-side limits for the replication identity
1690 will be enforced by the provider regardless of the limits requested
1691 by the LDAP Content Synchronization operation, much like for any other
1694 The LDAP Content Synchronization protocol has two operation types.
1697 operation, the next synchronization search operation
1698 is periodically rescheduled at an interval time (specified by
1700 parameter; 1 day by default)
1701 after each synchronization operation finishes.
1703 .B refreshAndPersist
1704 operation, a synchronization search remains persistent in the provider slapd.
1705 Further updates to the master replica will generate
1706 .B searchResultEntry
1707 to the consumer slapd as the search responses to the persistent
1708 synchronization search.
1710 If an error occurs during replication, the consumer will attempt to
1711 reconnect according to the
1713 parameter which is a list of the <retry interval> and <# of retries> pairs.
1714 For example, retry="60 10 300 3" lets the consumer retry every 60 seconds
1715 for the first 10 times and then retry every 300 seconds for the next 3
1716 times before stop retrying. The `+' in <# of retries> means indefinite
1717 number of retries until success.
1719 The schema checking can be enforced at the LDAP Sync
1720 consumer site by turning on the
1722 parameter. The default is off.
1726 parameter sets how long the consumer will wait to establish a
1727 network connection to the provider. Once a connection is
1730 parameter determines how long the consumer will wait for the initial
1731 Bind request to complete. The defaults for these parameters come
1739 requires the options
1743 and should only be used when adequate security services
1744 (e.g. TLS or IPSEC) are in place.
1751 Depending on the mechanism, an authentication identity and/or
1752 credentials can be specified using
1758 parameter may be used to specify an authorization identity.
1759 Specific security properties (as with the
1761 keyword above) for a SASL bind can be set with the
1763 option. A non default SASL realm can be set with the
1766 The provider, other than allow authentication of the syncrepl identity,
1767 should grant that identity appropriate access privileges to the data
1768 that is being replicated (\fBaccess\fP directive), and appropriate time
1769 and size limits (\fBlimits\fP directive).
1774 parameter specifies use of the StartTLS extended operation
1775 to establish a TLS session before Binding to the provider. If the
1777 argument is supplied, the session will be aborted if the StartTLS request
1778 fails. Otherwise the syncrepl session continues without TLS. The
1779 tls_reqcert setting defaults to "demand" and the other TLS settings
1780 default to the same as the main slapd TLS settings.
1782 Rather than replicating whole entries, the consumer can query logs of
1783 data modifications. This mode of operation is referred to as \fIdelta
1784 syncrepl\fP. In addition to the above parameters, the
1788 parameters must be set appropriately for the log that will be used. The
1790 parameter must be set to either "accesslog" if the log conforms to the
1791 .BR slapo\-accesslog (5)
1792 log format, or "changelog" if the log conforms
1793 to the obsolete \fIchangelog\fP format. If the
1795 parameter is omitted or set to "default" then the log parameters are
1799 .B olcUpdateDN: <dn>
1800 This option is only applicable in a slave
1802 It specifies the DN permitted to update (subject to access controls)
1803 the replica. It is only needed in certain push-mode
1804 replication scenarios. Generally, this DN
1810 .B olcUpdateRef: <url>
1811 Specify the referral to pass back when
1813 is asked to modify a replicated local database.
1814 If multiple values are specified, each url is provided.
1816 .SH DATABASE-SPECIFIC OPTIONS
1817 Each database may allow specific configuration options; they are
1818 documented separately in the backends' manual pages. See the
1819 .BR slapd.backends (5)
1820 manual page for an overview of available backends.
1822 An overlay is a piece of
1823 code that intercepts database operations in order to extend or change
1824 them. Overlays are pushed onto
1825 a stack over the database, and so they will execute in the reverse
1826 of the order in which they were configured and the database itself
1827 will receive control last of all.
1829 Overlays must be configured as child entries of a specific database. The
1830 entry's RDN must be of the form
1831 .B olcOverlay={x}<overlaytype>
1832 and the entry must have the olcOverlayConfig objectClass. Normally the
1833 config engine generates the "{x}" index in the RDN automatically, so
1834 it can be omitted when initially loading these entries.
1837 .BR slapd.overlays (5)
1838 manual page for an overview of available overlays.
1841 Here is a short example of a configuration in LDIF suitable for use with
1848 objectClass: olcGlobal
1850 olcPidFile: LOCALSTATEDIR/run/slapd.pid
1851 olcAttributeOptions: x\-hidden lang\-
1853 dn: cn=schema,cn=config
1854 objectClass: olcSchemaConfig
1857 include: SYSCONFDIR/schema/core.ldif
1859 dn: olcDatabase=frontend,cn=config
1860 objectClass: olcDatabaseConfig
1861 objectClass: olcFrontendConfig
1862 olcDatabase: frontend
1863 # Subtypes of "name" (e.g. "cn" and "ou") with the
1864 # option ";x\-hidden" can be searched for/compared,
1865 # but are not shown. See \fBslapd.access\fP(5).
1866 olcAccess: to attrs=name;x\-hidden by * =cs
1867 # Protect passwords. See \fBslapd.access\fP(5).
1868 olcAccess: to attrs=userPassword by * auth
1869 # Read access to other attributes and entries.
1870 olcAccess: to * by * read
1872 # set a rootpw for the config database so we can bind.
1873 # deny access to everyone else.
1874 dn: olcDatabase=config,cn=config
1875 objectClass: olcDatabaseConfig
1877 olcRootPW: {SSHA}XKYnrjvGT3wZFQrDD5040US592LxsdLy
1878 olcAccess: to * by * none
1880 dn: olcDatabase=bdb,cn=config
1881 objectClass: olcDatabaseConfig
1882 objectClass: olcBdbConfig
1884 olcSuffix: "dc=our\-domain,dc=com"
1885 # The database directory MUST exist prior to
1886 # running slapd AND should only be accessible
1887 # by the slapd/tools. Mode 0700 recommended.
1888 olcDbDirectory: LOCALSTATEDIR/openldap\-data
1889 # Indices to maintain
1890 olcDbIndex: objectClass eq
1891 olcDbIndex: cn,sn,mail pres,eq,approx,sub
1893 # We serve small clients that do not handle referrals,
1894 # so handle remote lookups on their behalf.
1895 dn: olcDatabase=ldap,cn=config
1896 objectClass: olcDatabaseConfig
1897 objectClass: olcLdapConfig
1900 olcDbUri: ldap://ldap.some\-server.com/
1904 Assuming the above data was saved in a file named "config.ldif" and the
1905 ETCDIR/slapd.d directory has been created, this command will initialize
1909 slapadd \-F ETCDIR/slapd.d \-n 0 \-l config.ldif
1914 "OpenLDAP Administrator's Guide" contains a longer annotated
1915 example of a slapd configuration.
1917 Alternatively, an existing slapd.conf file can be converted to the new
1918 format using slapd or any of the slap tools:
1921 slaptest \-f ETCDIR/slapd.conf \-F ETCDIR/slapd.d
1928 default slapd configuration file
1931 default slapd configuration directory
1935 .BR slapd.access (5),
1936 .BR slapd.backends (5),
1938 .BR slapd.overlays (5),
1939 .BR slapd.plugin (5),
1940 .BR slapd.replog (5),
1951 "OpenLDAP Administrator's Guide" (http://www.OpenLDAP.org/doc/admin/)
1952 .SH ACKNOWLEDGEMENTS
projects / openldap / blob