1 .TH SLAPD-CONFIG 5 "RELEASEDATE" "OpenLDAP LDVERSION"
2 .\" Copyright 1998-2011 The OpenLDAP Foundation All Rights Reserved.
3 .\" Copying restrictions apply. See COPYRIGHT/LICENSE.
6 slapd\-config \- configuration backend to slapd
12 backend manages all of the configuration information for the
14 daemon. This configuration information is also used by the SLAPD tools
26 backend is backward compatible with the older
28 file but provides the ability to change the configuration dynamically
29 at runtime. If slapd is run with only a
31 file dynamic changes will be allowed but they will not persist across
32 a server restart. Dynamic changes are only saved when slapd is running
35 configuration directory.
38 Unlike other backends, there can only be one instance of the
40 backend, and most of its structure is predefined. The root of the
41 database is hardcoded to
43 and this root entry contains
44 global settings for slapd. Multiple child entries underneath the
45 root entry are used to carry various other settings:
49 dynamically loaded modules
55 backend-specific settings
58 database-specific settings
63 entries will only appear in configurations where slapd
64 was built with support for dynamically loaded modules. There can be
65 multiple entries, one for each configured module path. Within each
66 entry there will be values recorded for each module loaded on a
67 given path. These entries have no children.
71 entry contains all of the hardcoded schema elements.
72 The children of this entry contain all user-defined schema elements.
73 In schema that were loaded from include files, the child entry will
74 be named after the include file from which the schema was loaded.
75 Typically the first child in this subtree will be
76 .BR cn=core,cn=schema,cn=config .
79 entries are for storing settings specific to a single
80 backend type (and thus global to all database instances of that type).
81 At present there are no backends that implement settings of this
82 nature, so usually there will not be any olcBackend entries.
85 entries store settings specific to a single database
86 instance. These entries may have
88 child entries corresponding
89 to any overlays configured on the database. The olcDatabase and
90 olcOverlay entries may also have miscellaneous child entries for
91 other settings as needed. There are two special database entries
92 that are predefined - one is an entry for the config database itself,
93 and the other is for the "frontend" database. Settings in the
94 frontend database are inherited by the other databases, unless
95 they are explicitly overridden in a specific database.
97 The specific configuration options available are discussed below in the
98 Global Configuration Options, General Backend Options, and General Database
99 Options. Options are set by defining LDAP attributes with specific values.
100 In general the names of the LDAP attributes are the same as the corresponding
102 keyword, with an "olc" prefix added on.
104 The parser for many of these attributes is the same as used for parsing
105 the slapd.conf keywords. As such, slapd.conf keywords that allow multiple
106 items to be specified on one line, separated by whitespace, will allow
107 multiple items to be specified in one attribute value. However, when
108 reading the attribute via LDAP, the items will be returned as individual
111 Backend-specific options are discussed in the
112 .B slapd\-<backend>(5)
113 manual pages. Refer to the "OpenLDAP Administrator's Guide" for more
114 details on configuring slapd.
115 .SH GLOBAL CONFIGURATION OPTIONS
116 Options described in this section apply to the server as a whole.
117 Arguments that should be replaced by
118 actual text are shown in brackets <>.
120 These options may only be specified in the
122 entry. This entry must have an objectClass of
126 .B olcAllows: <features>
127 Specify a set of features to allow (default none).
129 allows acceptance of LDAPv2 bind requests. Note that
131 does not truly implement LDAPv2 (RFC 1777), now Historic (RFC 3494).
133 allows anonymous bind when credentials are not empty (e.g.
136 allows unauthenticated (anonymous) bind when DN is not empty.
138 allows unauthenticated (anonymous) update operations to be processed
139 (subject to access controls and other administrative limits).
141 allows unauthenticated (anonymous) proxy authorization control to be processed
142 (subject to access controls, authorization and other administrative limits).
144 .B olcArgsFile: <filename>
145 The (absolute) name of a file that will hold the
147 server's command line (program name and options).
149 .B olcAttributeOptions: <option-name>...
150 Define tagging attribute options or option tag/range prefixes.
151 Options must not end with `\-', prefixes must end with `\-'.
152 The `lang\-' prefix is predefined.
154 .B olcAttributeOptions
155 directive, `lang\-' will no longer be defined and you must specify it
156 explicitly if you want it defined.
158 An attribute description with a tagging option is a subtype of that
159 attribute description without the option.
160 Except for that, options defined this way have no special semantics.
161 Prefixes defined this way work like the `lang\-' options:
162 They define a prefix for tagging options starting with the prefix.
163 That is, if you define the prefix `x\-foo\-', you can use the option
165 Furthermore, in a search or compare, a prefix or range name (with
166 a trailing `\-') matches all options starting with that name, as well
167 as the option with the range name sans the trailing `\-'.
168 That is, `x\-foo\-bar\-' matches `x\-foo\-bar' and `x\-foo\-bar\-baz'.
170 RFC 4520 reserves options beginning with `x\-' for private experiments.
171 Other options should be registered with IANA, see RFC 4520 section 3.5.
172 OpenLDAP also has the `binary' option built in, but this is a transfer
173 option, not a tagging option.
175 .B olcAuthIDRewrite: <rewrite\-rule>
176 Used by the authentication framework to convert simple user names
177 to an LDAP DN used for authorization purposes.
178 Its purpose is analogous to that of
183 is a set of rules analogous to those described in
185 for data rewriting (after stripping the \fIrwm\-\fP prefix).
189 should not be intermixed.
191 .B olcAuthzPolicy: <policy>
192 Used to specify which rules to use for Proxy Authorization. Proxy
193 authorization allows a client to authenticate to the server using one
194 user's credentials, but specify a different identity to use for authorization
195 and access control purposes. It essentially allows user A to login as user
196 B, using user A's password.
199 flag disables proxy authorization. This is the default setting.
202 flag will use rules in the
204 attribute of the authorization DN.
207 flag will use rules in the
209 attribute of the authentication DN.
212 flag, an alias for the deprecated value of
214 will allow any of the above, whatever succeeds first (checked in
220 flag requires both authorizations to succeed.
223 The rules are mechanisms to specify which identities are allowed
224 to perform proxy authorization.
227 attribute in an entry specifies which other users
228 are allowed to proxy login to this entry. The
231 an entry specifies which other users this user can authorize as. Use of
234 abused if users are allowed to write arbitrary values to this attribute.
237 attribute must be protected with ACLs such that
238 only privileged users can modify it.
245 or a set of identities; it can take five forms:
248 .B ldap:///<base>??[<scope>]?<filter>
251 .B dn[.<dnstyle>]:<pattern>
254 .B u[<mech>[<realm>]]:<pattern>
257 .B group[/objectClass[/attributeType]]:<pattern>
264 .B <dnstyle>:={exact|onelevel|children|subtree|regex}
267 The first form is a valid LDAP
275 portions must be absent, so that the search occurs locally on either
281 with the optional style modifiers
287 for exact, onelevel, children and subtree matches, which cause
289 to be normalized according to the DN normalization rules, or the special
291 style, which causes the
293 to be treated as a POSIX (''extended'') regular expression, as
300 means any non-anonymous DN.
301 The third form is a SASL
303 with the optional fields
307 that allow to specify a SASL
309 and eventually a SASL
311 for those mechanisms that support one.
312 The need to allow the specification of a mechanism is still debated,
313 and users are strongly discouraged to rely on this possibility.
314 The fourth form is a group specification, consisting of the keyword
316 optionally followed by the specification of the group
322 is searched with base scope, and in case of match, the values of the
325 are searched for the asserted DN.
326 For backwards compatibility, if no identity type is provided, i.e. only
330 is assumed; as a consequence,
332 is subjected to DN normalization.
333 Since the interpretation of
337 can impact security, users are strongly encouraged
338 to explicitly set the type of identity specification that is being used.
339 A subset of these rules can be used as third arg in the
341 statement (see below); significantly, the
348 .B olcAuthzRegexp: <match> <replace>
349 Used by the authentication framework to convert simple user names,
350 such as provided by SASL subsystem, to an LDAP DN used for
351 authorization purposes. Note that the resultant DN need not refer
352 to an existing entry to be considered valid. When an authorization
353 request is received from the SASL subsystem, the SASL
358 are taken, when available, and combined into a name of the form
362 .B UID=<username>[[,CN=<realm>],CN=<mechanism>],CN=auth
365 This name is then compared against the
367 POSIX (''extended'') regular expression, and if the match is successful,
368 the name is replaced with the
370 string. If there are wildcard strings in the
372 regular expression that are enclosed in parenthesis, e.g.
378 then the portion of the name that matched the wildcard will be stored
379 in the numbered placeholder variable $1. If there are other wildcard strings
380 in parenthesis, the matching strings will be in $2, $3, etc. up to $9. The
381 placeholders can then be used in the
386 .B UID=$1,OU=Accounts,DC=example,DC=com
389 The replaced name can be either a DN, i.e. a string prefixed by "dn:",
391 If the latter, the server will use the URI to search its own database(s)
392 and, if the search returns exactly one entry, the name is
393 replaced by the DN of that entry. The LDAP URI must have no
394 hostport, attrs, or extensions components, but the filter is mandatory,
398 .B ldap:///OU=Accounts,DC=example,DC=com??one?(UID=$1)
401 The protocol portion of the URI must be strictly
403 Note that this search is subject to access controls. Specifically,
404 the authentication identity must have "auth" access in the subject.
408 values can be specified to allow for multiple matching
409 and replacement patterns. The matching patterns are checked in the order they
410 appear in the attribute, stopping at the first successful match.
413 .\"Because the plus sign + is a character recognized by the regular expression engine,
414 .\"and it will appear in names that include a REALM, be careful to escape the
415 .\"plus sign with a backslash \\+ to remove the character's special meaning.
418 .B olcConcurrency: <integer>
419 Specify a desired level of concurrency. Provided to the underlying
420 thread system as a hint. The default is not to provide any hint. This setting
421 is only meaningful on some platforms where there is not a one to one
422 correspondence between user threads and kernel threads.
424 .B olcConnMaxPending: <integer>
425 Specify the maximum number of pending requests for an anonymous session.
426 If requests are submitted faster than the server can process them, they
427 will be queued up to this limit. If the limit is exceeded, the session
428 is closed. The default is 100.
430 .B olcConnMaxPendingAuth: <integer>
431 Specify the maximum number of pending requests for an authenticated session.
434 .B olcDisallows: <features>
435 Specify a set of features to disallow (default none).
437 disables acceptance of anonymous bind requests. Note that this setting
438 does not prohibit anonymous directory access (See "require authc").
440 disables simple (bind) authentication.
442 disables forcing session to anonymous status (see also
444 upon StartTLS operation receipt.
446 disallows the StartTLS operation if authenticated (see also
449 .B olcExtraAttrs: <attr>
450 Lists what attributes need to be added to search requests.
451 Local storage backends return the entire entry to the frontend.
452 The frontend takes care of only returning the requested attributes
453 that are allowed by ACLs.
454 However, features like access checking and so may need specific
455 attributes that are not automatically returned by remote storage
456 backends, like proxy backends and so on.
458 is an attribute that is needed for internal purposes
459 and thus always needs to be collected, even when not explicitly
460 requested by clients.
461 This attribute is multi-valued.
463 .B olcGentleHUP: { TRUE | FALSE }
464 A SIGHUP signal will only cause a 'gentle' shutdown-attempt:
466 will stop listening for new connections, but will not close the
467 connections to the current clients. Future write operations return
468 unwilling-to-perform, though. Slapd terminates when all clients
469 have closed their connections (if they ever do), or - as before -
470 if it receives a SIGTERM signal. This can be useful if you wish to
471 terminate the server and start a new
474 .B with another database,
475 without disrupting the currently active clients.
476 The default is FALSE. You may wish to use
478 along with this option.
480 .B olcIdleTimeout: <integer>
481 Specify the number of seconds to wait before forcibly closing
482 an idle client connection. A setting of 0 disables this
483 feature. The default is 0. You may also want to set the
487 .B olcIndexIntLen: <integer>
488 Specify the key length for ordered integer indices. The most significant
489 bytes of the binary integer will be used for index keys. The default
490 value is 4, which provides exact indexing for 31 bit values.
491 A floating point representation is used to index too large values.
493 .B olcIndexSubstrIfMaxlen: <integer>
494 Specify the maximum length for subinitial and subfinal indices. Only
495 this many characters of an attribute value will be processed by the
496 indexing functions; any excess characters are ignored. The default is 4.
498 .B olcIndexSubstrIfMinlen: <integer>
499 Specify the minimum length for subinitial and subfinal indices. An
500 attribute value must have at least this many characters in order to be
501 processed by the indexing functions. The default is 2.
503 .B olcIndexSubstrAnyLen: <integer>
504 Specify the length used for subany indices. An attribute value must have
505 at least this many characters in order to be processed. Attribute values
506 longer than this length will be processed in segments of this length. The
507 default is 4. The subany index will also be used in subinitial and
508 subfinal index lookups when the filter string is longer than the
509 .I olcIndexSubstrIfMaxlen
512 .B olcIndexSubstrAnyStep: <integer>
513 Specify the steps used in subany index lookups. This value sets the offset
514 for the segments of a filter string that are processed for a subany index
515 lookup. The default is 2. For example, with the default values, a search
516 using this filter "cn=*abcdefgh*" would generate index lookups for
517 "abcd", "cdef", and "efgh".
520 Note: Indexing support depends on the particular backend in use. Also,
521 changing these settings will generally require deleting any indices that
522 depend on these parameters and recreating them with
526 .B olcListenerThreads: <integer>
527 Specify the number of threads to use for the connection manager.
528 The default is 1 and this is typically adequate for up to 16 CPU cores.
529 The value should be set to a power of 2.
531 .B olcLocalSSF: <SSF>
532 Specifies the Security Strength Factor (SSF) to be given local LDAP sessions,
533 such as those to the ldapi:// listener. For a description of SSF values,
535 .BR olcSaslSecProps 's
537 option description. The default is 71.
539 .B olcLogFile: <filename>
540 Specify a file for recording debug log messages. By default these messages
541 only go to stderr and are not recorded anywhere else. Specifying a logfile
542 copies messages to both stderr and the logfile.
544 .B olcLogLevel: <integer> [...]
545 Specify the level at which debugging statements and operation
546 statistics should be syslogged (currently logged to the
548 LOG_LOCAL4 facility).
549 They must be considered subsystems rather than increasingly verbose
551 Some messages with higher priority are logged regardless
552 of the configured loglevel as soon as any logging is configured.
553 Log levels are additive, and available levels are:
564 debug packet handling
568 heavy trace debugging (function args)
572 connection management
576 print out packets sent and received
580 search filter processing
584 configuration file processing
588 access control list processing
592 stats log connections/operations/results
596 stats log entries sent
600 print communication with shell backends
612 \"data indexing (unused)
620 only messages that get logged whatever log level is set
623 The desired log level can be input as a single integer that combines
624 the (ORed) desired levels, both in decimal or in hexadecimal notation,
625 as a list of integers (that are ORed internally),
626 or as a list of the names that are shown between brackets, such that
632 olcLogLevel: 0x80 0x1
633 olcLogLevel: acl trace
639 can be used as a shortcut to enable logging at all levels (equivalent to \-1).
642 or the equivalent integer representation, causes those messages
643 that are logged regardless of the configured olcLogLevel to be logged.
644 In fact, if no olcLogLevel (or a 0 level) is defined, no logging occurs,
647 level is required to have high priority messages logged.
650 .B olcPasswordCryptSaltFormat: <format>
651 Specify the format of the salt passed to
653 when generating {CRYPT} passwords (see
654 .BR olcPasswordHash )
655 during processing of LDAP Password Modify Extended Operations (RFC 3062).
657 This string needs to be in
659 format and may include one (and only one) %s conversion.
660 This conversion will be substituted with a string of random
661 characters from [A\-Za\-z0\-9./]. For example, "%.2s"
662 provides a two character salt and "$1$%.8s" tells some
663 versions of crypt(3) to use an MD5 algorithm and provides
664 8 random characters of salt. The default is "%s", which
665 provides 31 characters of salt.
667 .B olcPidFile: <filename>
668 The (absolute) name of a file that will hold the
670 server's process ID (see
673 .B olcPluginLogFile: <filename>
674 The ( absolute ) name of a file that will contain log
681 .B olcReferral: <url>
682 Specify the referral to pass back when
684 cannot find a local database to handle a request.
685 If multiple values are specified, each url is provided.
687 .B olcReverseLookup: TRUE | FALSE
688 Enable/disable client name unverified reverse lookup (default is
690 if compiled with \-\-enable\-rlookups).
692 .B olcRootDSE: <file>
693 Specify the name of an LDIF(5) file containing user defined attributes
694 for the root DSE. These attributes are returned in addition to the
695 attributes normally produced by slapd.
697 The root DSE is an entry with information about the server and its
698 capabilities, in operational attributes.
699 It has the empty DN, and can be read with e.g.:
701 ldapsearch \-x \-b "" \-s base "+"
703 See RFC 4512 section 5.1 for details.
705 .B olcSaslAuxprops: <plugin> [...]
706 Specify which auxprop plugins to use for authentication lookups. The
707 default is empty, which just uses slapd's internal support. Usually
708 no other auxprop plugins are needed.
710 .B olcSaslHost: <fqdn>
711 Used to specify the fully qualified domain name used for SASL processing.
713 .B olcSaslRealm: <realm>
714 Specify SASL realm. Default is empty.
716 .B olcSaslSecProps: <properties>
717 Used to specify Cyrus SASL security properties.
720 flag (without any other properties) causes the flag properties
721 default, "noanonymous,noplain", to be cleared.
724 flag disables mechanisms susceptible to simple passive attacks.
727 flag disables mechanisms susceptible to active attacks.
730 flag disables mechanisms susceptible to passive dictionary attacks.
733 flag disables mechanisms which support anonymous login.
736 flag require forward secrecy between sessions.
739 require mechanisms which pass client credentials (and allow
740 mechanisms which can pass credentials to do so).
743 property specifies the minimum acceptable
744 .I security strength factor
745 as an integer approximate to effective key length used for
746 encryption. 0 (zero) implies no protection, 1 implies integrity
747 protection only, 56 allows DES or other weak ciphers, 112
748 allows triple DES and other strong ciphers, 128 allows RC4,
749 Blowfish and other modern strong ciphers. The default is 0.
752 property specifies the maximum acceptable
753 .I security strength factor
754 as an integer (see minssf description). The default is INT_MAX.
757 property specifies the maximum security layer receive buffer
758 size allowed. 0 disables security layers. The default is 65536.
760 .B olcServerID: <integer> [<URL>]
761 Specify an integer ID from 0 to 4095 for this server (limited
762 to 3 hexadecimal digits). The ID may also be specified as a
763 hexadecimal ID by prefixing the value with "0x".
765 required when using multimaster replication and each master must have a
766 unique ID. Note that this requirement also applies to separate masters
767 contributing to a glued set of databases.
768 If the URL is provided, this directive may be specified
769 multiple times, providing a complete list of participating servers
770 and their IDs. The fully qualified hostname of each server should be
771 used in the supplied URLs. The IDs are used in the "replica id" field
772 of all CSNs generated by the specified server. The default value is zero.
776 olcServerID: 1 ldap://ldap1.example.com
777 olcServerID: 2 ldap://ldap2.example.com
780 .B olcSockbufMaxIncoming: <integer>
781 Specify the maximum incoming LDAP PDU size for anonymous sessions.
782 The default is 262143.
784 .B olcSockbufMaxIncomingAuth: <integer>
785 Specify the maximum incoming LDAP PDU size for authenticated sessions.
786 The default is 4194303.
788 .B olcTCPBuffer [listener=<URL>] [{read|write}=]<size>
789 Specify the size of the TCP buffer.
790 A global value for both read and write TCP buffers related to any listener
791 is defined, unless the listener is explicitly specified,
792 or either the read or write qualifiers are used.
796 Note that some OS-es implement automatic TCP buffer tuning.
798 .B olcThreads: <integer>
799 Specify the maximum size of the primary thread pool.
800 The default is 16; the minimum value is 2.
802 .B olcToolThreads: <integer>
803 Specify the maximum number of threads to use in tool mode.
804 This should not be greater than the number of CPUs in the system.
807 .B olcWriteTimeout: <integer>
808 Specify the number of seconds to wait before forcibly closing
809 a connection with an outstanding write. This allows recovery from
810 various network hang conditions. A setting of 0 disables this
811 feature. The default is 0.
815 is built with support for Transport Layer Security, there are more options
818 .B olcTLSCipherSuite: <cipher-suite-spec>
819 Permits configuring what ciphers will be accepted and the preference order.
820 <cipher-suite-spec> should be a cipher specification for OpenSSL resp. GNUtls.
826 olcTLSCipherSuite: HIGH:MEDIUM:+SSLv2
829 TLSCiphersuite SECURE256:!AES-128-CBC
832 To check what ciphers a given spec selects in OpenSSL, use:
835 openssl ciphers \-v <cipher-suite-spec>
838 With GNUtls the available specs can be found in the manual page of
840 (see the description of the
844 In older versions of GNUtls, where gnutls\-cli does not support the option
845 \-\-priority, you can obtain the \(em more limited \(em list of ciphers by calling:
852 .B olcTLSCACertificateFile: <filename>
853 Specifies the file that contains certificates for all of the Certificate
858 .B olcTLSCACertificatePath: <path>
859 Specifies the path of a directory that contains Certificate Authority
860 certificates in separate individual files. Usually only one of this
861 or the olcTLSCACertificateFile is defined. If both are specified, both
862 locations will be used. This directive is not supported
865 .B olcTLSCertificateFile: <filename>
866 Specifies the file that contains the
870 .B olcTLSCertificateKeyFile: <filename>
871 Specifies the file that contains the
873 server private key that matches the certificate stored in the
874 .B olcTLSCertificateFile
875 file. If the private key is protected with a password, the password must
876 be manually typed in when slapd starts. Usually the private key is not
877 protected with a password, to allow slapd to start without manual
879 it is of critical importance that the file is protected carefully.
881 .B olcTLSDHParamFile: <filename>
882 This directive specifies the file that contains parameters for Diffie-Hellman
883 ephemeral key exchange. This is required in order to use a DSA certificate on
884 the server. If multiple sets of parameters are present in the file, all of
885 them will be processed. Note that setting this option may also enable
886 Anonymous Diffie-Hellman key exchanges in certain non-default cipher suites.
887 You should append "!ADH" to your cipher suites if you have changed them
888 from the default, otherwise no certificate exchanges or verification will
889 be done. When using GNUtls these parameters are always generated randomly
890 so this directive is ignored.
892 .B olcTLSRandFile: <filename>
893 Specifies the file to obtain random bits from when /dev/[u]random
894 is not available. Generally set to the name of the EGD/PRNGD socket.
895 The environment variable RANDFILE can also be used to specify the filename.
896 This directive is ignored with GNUtls.
898 .B olcTLSVerifyClient: <level>
899 Specifies what checks to perform on client certificates in an
900 incoming TLS session, if any.
903 can be specified as one of the following keywords:
909 will not ask the client for a certificate.
912 The client certificate is requested. If no certificate is provided,
913 the session proceeds normally. If a bad certificate is provided,
914 it will be ignored and the session proceeds normally.
917 The client certificate is requested. If no certificate is provided,
918 the session proceeds normally. If a bad certificate is provided,
919 the session is immediately terminated.
921 .B demand | hard | true
922 These keywords are all equivalent, for compatibility reasons.
923 The client certificate is requested. If no certificate is provided,
924 or a bad certificate is provided, the session is immediately terminated.
926 Note that a valid client certificate is required in order to use the
927 SASL EXTERNAL authentication mechanism with a TLS session. As such,
929 .B olcTLSVerifyClient
930 setting must be chosen to enable SASL EXTERNAL authentication.
933 .B olcTLSCRLCheck: <level>
934 Specifies if the Certificate Revocation List (CRL) of the CA should be
935 used to verify if the client certificates have not been revoked. This
937 .B olcTLSCACertificatePath
938 parameter to be set. This parameter is ignored with GNUtls.
940 can be specified as one of the following keywords:
944 No CRL checks are performed
947 Check the CRL of the peer certificate
950 Check the CRL for a whole certificate chain
953 .B olcTLSCRLFile: <filename>
954 Specifies a file containing a Certificate Revocation List to be used
955 for verifying that certificates have not been revoked. This parameter
956 is only valid when using GNUtls.
957 .SH DYNAMIC MODULE OPTIONS
960 is compiled with \-\-enable\-modules then the module-related entries will
961 be available. These entries are named
962 .B cn=module{x},cn=config
964 must have the olcModuleList objectClass. One entry should be created
967 Normally the config engine generates the "{x}" index in the RDN
968 automatically, so it can be omitted when initially loading these entries.
970 .B olcModuleLoad: <filename>
971 Specify the name of a dynamically loadable module to load. The filename
972 may be an absolute path name or a simple filename. Non-absolute names
973 are searched for in the directories specified by the
977 .B olcModulePath: <pathspec>
978 Specify a list of directories to search for loadable modules. Typically
979 the path is colon-separated but this depends on the operating system.
980 The default is MODULEDIR, which is where the standard OpenLDAP install
981 will place its modules.
983 Schema definitions are created as entries in the
984 .B cn=schema,cn=config
985 subtree. These entries must have the olcSchemaConfig objectClass.
986 As noted above, the actual
987 .B cn=schema,cn=config
988 entry is predefined and any values specified for it are ignored.
992 .B olcAttributetypes: "(\ <oid>\
994 [DESC\ <description>]\
1003 [NO\-USER\-MODIFICATION]\
1004 [USAGE\ <attributeUsage>]\ )"
1006 Specify an attribute type using the LDAPv3 syntax defined in RFC 4512.
1007 The slapd parser extends the RFC 4512 definition by allowing string
1008 forms as well as numeric OIDs to be used for the attribute OID and
1009 attribute syntax OID.
1011 .B olcObjectIdentifier
1017 .B olcDitContentRules: "(\ <oid>\
1019 [DESC\ <description>]\
1026 Specify an DIT Content Rule using the LDAPv3 syntax defined in RFC 4512.
1027 The slapd parser extends the RFC 4512 definition by allowing string
1028 forms as well as numeric OIDs to be used for the attribute OID and
1029 attribute syntax OID.
1031 .B olcObjectIdentifier
1037 .B olcObjectClasses: "(\ <oid>\
1039 [DESC\ <description>]\
1042 [{ ABSTRACT | STRUCTURAL | AUXILIARY }]\
1043 [MUST\ <oids>] [MAY\ <oids>] )"
1045 Specify an objectclass using the LDAPv3 syntax defined in RFC 4512.
1046 The slapd parser extends the RFC 4512 definition by allowing string
1047 forms as well as numeric OIDs to be used for the object class OID.
1051 description.) Object classes are "STRUCTURAL" by default.
1054 .B olcObjectIdentifier: <name> "{ <oid> | <name>[:<suffix>] }"
1055 Define a string name that equates to the given OID. The string can be used
1056 in place of the numeric OID in objectclass and attribute definitions. The
1057 name can also be used with a suffix of the form ":xx" in which case the
1058 value "oid.xx" will be used.
1060 .SH GENERAL BACKEND OPTIONS
1061 Options in these entries only apply to the configuration of a single
1062 type of backend. All backends may support this class of options.
1063 The entry must be named
1064 .B olcBackend=<databasetype>,cn=config
1065 and must have the olcBackendConfig objectClass.
1083 At present, no backend implements any options of this type.
1085 .SH DATABASE OPTIONS
1086 Database options are set in entries named
1087 .B olcDatabase={x}<databasetype>,cn=config
1088 and must have the olcDatabaseConfig objectClass. Normally the config
1089 engine generates the "{x}" index in the RDN automatically, so it
1090 can be omitted when initially loading these entries.
1092 The special frontend database is always numbered "{\-1}" and the config
1093 database is always numbered "{0}".
1095 .SH GLOBAL DATABASE OPTIONS
1096 Options in this section may be set in the special "frontend" database
1097 and inherited in all the other databases. These options may be altered
1098 by further settings in each specific database. The frontend entry must
1100 .B olcDatabase=frontend,cn=config
1101 and must have the olcFrontendConfig objectClass.
1103 .B olcAccess: to <what> "[ by <who> <access> <control> ]+"
1104 Grant access (specified by <access>) to a set of entries and/or
1105 attributes (specified by <what>) by one or more requestors (specified
1107 If no access controls are present, the default policy
1108 allows anyone and everyone to read anything but restricts
1109 updates to rootdn. (e.g., "olcAccess: to * by * read").
1111 .BR slapd.access (5)
1112 and the "OpenLDAP Administrator's Guide" for details.
1114 Access controls set in the frontend are appended to any access
1115 controls set on the specific databases.
1116 The rootdn of a database can always read and write EVERYTHING
1119 Extra special care must be taken with the access controls on the
1120 config database. Unlike other databases, the default policy for the
1121 config database is to only allow access to the rootdn. Regular users
1122 should not have read access, and write access should be granted very
1123 carefully to privileged administrators.
1126 .B olcDefaultSearchBase: <dn>
1127 Specify a default search base to use when client submits a
1128 non-base search request with an empty base DN.
1129 Base scoped search requests with an empty base DN are not affected.
1130 This setting is only allowed in the frontend entry.
1132 .B olcPasswordHash: <hash> [<hash>...]
1133 This option configures one or more hashes to be used in generation of user
1134 passwords stored in the userPassword attribute during processing of
1135 LDAP Password Modify Extended Operations (RFC 3062).
1136 The <hash> must be one of
1150 use the SHA-1 algorithm (FIPS 160-1), the latter with a seed.
1155 use the MD5 algorithm (RFC 1321), the latter with a seed.
1162 indicates that the new password should be
1163 added to userPassword as clear text.
1165 Note that this option does not alter the normal user applications
1166 handling of userPassword during LDAP Add, Modify, or other LDAP operations.
1167 This setting is only allowed in the frontend entry.
1169 .B olcReadOnly: TRUE | FALSE
1170 This option puts the database into "read-only" mode. Any attempts to
1171 modify the database will return an "unwilling to perform" error. By
1172 default, olcReadOnly is FALSE. Note that when this option is set
1173 TRUE on the frontend, it cannot be reset without restarting the
1174 server, since further writes to the config database will be rejected.
1176 .B olcRequires: <conditions>
1177 Specify a set of conditions to require (default none).
1178 The directive may be specified globally and/or per-database;
1179 databases inherit global conditions, so per-database specifications
1182 requires bind operation prior to directory operations.
1184 requires session to be using LDAP version 3.
1186 requires authentication prior to directory operations.
1188 requires SASL authentication prior to directory operations.
1190 requires strong authentication prior to directory operations.
1191 The strong keyword allows protected "simple" authentication
1192 as well as SASL authentication.
1194 may be used to require no conditions (useful to clear out globally
1195 set conditions within a particular database); it must occur first
1196 in the list of conditions.
1198 .B olcRestrict: <oplist>
1199 Specify a list of operations that are restricted.
1200 Restrictions on a specific database override any frontend setting.
1201 Operations can be any of
1206 .BR extended[=<OID>] ,
1210 or the special pseudo-operations
1214 which respectively summarize read and write operations.
1218 .I olcReadOnly: TRUE
1222 keyword allows to indicate the OID of the specific operation
1225 .B olcSchemaDN: <dn>
1226 Specify the distinguished name for the subschema subentry that
1227 controls the entries on this server. The default is "cn=Subschema".
1229 .B olcSecurity: <factors>
1230 Specify a set of security strength factors (separated by white space)
1232 .BR olcSaslSecprops 's
1234 option for a description of security strength factors).
1235 The directive may be specified globally and/or per-database.
1237 specifies the overall security strength factor.
1239 specifies the transport security strength factor.
1241 specifies the TLS security strength factor.
1243 specifies the SASL security strength factor.
1245 specifies the overall security strength factor to require for
1247 .B update_transport=<n>
1248 specifies the transport security strength factor to require for
1251 specifies the TLS security strength factor to require for
1254 specifies the SASL security strength factor to require for
1257 specifies the security strength factor required for
1259 username/password authentication.
1262 factor is measure of security provided by the underlying transport,
1263 e.g. ldapi:// (and eventually IPSEC). It is not normally used.
1265 .B olcSizeLimit: {<integer>|unlimited}
1267 .B olcSizeLimit: size[.{soft|hard|unchecked}]=<integer> [...]
1268 Specify the maximum number of entries to return from a search operation.
1269 The default size limit is 500.
1272 to specify no limits.
1273 The second format allows a fine grain setting of the size limits.
1274 Extra args can be added in the same value or as additional values.
1277 for an explanation of the different flags.
1279 .B olcSortVals: <attr> [...]
1280 Specify a list of multi-valued attributes whose values will always
1281 be maintained in sorted order. Using this option will allow Modify,
1282 Compare, and filter evaluations on these attributes to be performed
1283 more efficiently. The resulting sort order depends on the
1284 attributes' syntax and matching rules and may not correspond to
1285 lexical order or any other recognizable order.
1286 This setting is only allowed in the frontend entry.
1288 .B olcTimeLimit: {<integer>|unlimited}
1290 .B olcTimeLimit: time[.{soft|hard}]=<integer> [...]
1291 Specify the maximum number of seconds (in real time)
1293 will spend answering a search request. The default time limit is 3600.
1296 to specify no limits.
1297 The second format allows a fine grain setting of the time limits.
1298 Extra args can be added in the same value or as additional values.
1301 for an explanation of the different flags.
1303 .SH GENERAL DATABASE OPTIONS
1304 Options in this section only apply to the specific database for
1305 which they are defined. They are supported by every
1306 type of backend. All of the Global Database Options may also be
1309 .B olcAddContentAcl: TRUE | FALSE
1310 Controls whether Add operations will perform ACL checks on
1311 the content of the entry being added. This check is off
1313 .BR slapd.access (5)
1314 manual page for more details on ACL requirements for
1317 .B olcHidden: TRUE | FALSE
1318 Controls whether the database will be used to answer
1319 queries. A database that is hidden will never be
1320 selected to answer any queries, and any suffix configured
1321 on the database will be ignored in checks for conflicts
1322 with other databases. By default, olcHidden is FALSE.
1324 .B olcLastMod: TRUE | FALSE
1327 will automatically maintain the
1328 modifiersName, modifyTimestamp, creatorsName, and
1329 createTimestamp attributes for entries. It also controls
1330 the entryCSN and entryUUID attributes, which are needed
1331 by the syncrepl provider. By default, olcLastMod is TRUE.
1333 .B olcLimits: <selector> <limit> [<limit> [...]]
1334 Specify time and size limits based on the operation's initiator or
1342 anonymous | users | [<dnspec>=]<pattern> | group[/oc[/at]]=<pattern>
1348 <dnspec> ::= dn[.<type>][.<style>]
1350 <type> ::= self | this
1352 <style> ::= exact | base | onelevel | subtree | children | regex | anonymous
1357 is the default and means the bound user, while
1359 means the base DN of the operation.
1362 matches all unauthenticated clients.
1365 matches all authenticated clients;
1368 dn pattern is assumed unless otherwise specified by qualifying
1369 the (optional) key string
1375 (which are synonyms), to require an exact match; with
1377 to require exactly one level of depth match; with
1379 to allow any level of depth match, including the exact match; with
1381 to allow any level of depth match, not including the exact match;
1383 explicitly requires the (default) match based on POSIX (''extended'')
1384 regular expression pattern.
1387 matches unbound operations; the
1390 The same behavior is obtained by using the
1397 with the optional objectClass
1403 sets the limits for any DN listed in the values of the
1409 group objectClass (default
1411 whose DN exactly matches
1414 The currently supported limits are
1419 The syntax for time limits is
1420 .BR time[.{soft|hard}]=<integer> ,
1423 is the number of seconds slapd will spend answering a search request.
1424 If no time limit is explicitly requested by the client, the
1426 limit is used; if the requested time limit exceeds the
1429 .\".I "Administrative limit exceeded"
1430 .\"error is returned.
1431 limit, the value of the limit is used instead.
1434 limit is set to the keyword
1436 the soft limit is used in either case; if it is set to the keyword
1438 no hard limit is enforced.
1439 Explicit requests for time limits smaller or equal to the
1442 If no limit specifier is set, the value is assigned to the
1448 to preserve the original behavior.
1450 The syntax for size limits is
1451 .BR size[.{soft|hard|unchecked}]=<integer> ,
1454 is the maximum number of entries slapd will return answering a search
1456 If no size limit is explicitly requested by the client, the
1458 limit is used; if the requested size limit exceeds the
1461 .\".I "Administrative limit exceeded"
1462 .\"error is returned.
1463 limit, the value of the limit is used instead.
1466 limit is set to the keyword
1468 the soft limit is used in either case; if it is set to the keyword
1470 no hard limit is enforced.
1471 Explicit requests for size limits smaller or equal to the
1476 specifier sets a limit on the number of candidates a search request is allowed
1478 The rationale behind it is that searches for non-properly indexed
1479 attributes may result in large sets of candidates, which must be
1482 to determine whether they match the search filter or not.
1485 limit provides a means to drop such operations before they are even
1487 If the selected candidates exceed the
1489 limit, the search will abort with
1490 .IR "Unwilling to perform" .
1491 If it is set to the keyword
1493 no limit is applied (the default).
1496 the search is not even performed; this can be used to disallow searches
1497 for a specific set of users.
1498 If no limit specifier is set, the value is assigned to the
1504 to preserve the original behavior.
1506 In case of no match, the global limits are used.
1507 The default values are the same as for
1516 control is requested, the
1518 size limit is used by default, because the request of a specific page size
1519 is considered an explicit request for a limitation on the number
1520 of entries to be returned.
1521 However, the size limit applies to the total count of entries returned within
1522 the search, and not to a single page.
1523 Additional size limits may be enforced; the syntax is
1524 .BR size.pr={<integer>|noEstimate|unlimited} ,
1527 is the max page size if no explicit limit is set; the keyword
1529 inhibits the server from returning an estimate of the total number
1530 of entries that might be returned
1531 (note: the current implementation does not return any estimate).
1534 indicates that no limit is applied to the pagedResults control page size.
1536 .B size.prtotal={<integer>|unlimited|disabled}
1537 allows to set a limit on the total number of entries that a pagedResults
1538 control allows to return.
1539 By default it is set to the
1544 is the max number of entries that the whole search with pagedResults control
1548 to allow unlimited number of entries to be returned, e.g. to allow
1549 the use of the pagedResults control as a means to circumvent size
1550 limitations on regular searches; the keyword
1552 disables the control, i.e. no paged results can be returned.
1553 Note that the total number of entries returned when the pagedResults control
1554 is requested cannot exceed the
1556 size limit of regular searches unless extended by the
1561 .B olcMaxDerefDepth: <depth>
1562 Specifies the maximum number of aliases to dereference when trying to
1563 resolve an entry, used to avoid infinite alias loops. The default is 15.
1565 .B olcMirrorMode: TRUE | FALSE
1566 This option puts a replica database into "mirror" mode. Update
1567 operations will be accepted from any user, not just the updatedn. The
1568 database must already be configured as syncrepl consumer
1569 before this keyword may be set. This mode also requires a
1571 (see above) to be configured.
1572 By default, this setting is FALSE.
1574 .B olcPlugin: <plugin_type> <lib_path> <init_function> [<arguments>]
1575 Configure a SLAPI plugin. See the
1576 .BR slapd.plugin (5)
1577 manpage for more details.
1580 Specify the distinguished name that is not subject to access control
1581 or administrative limit restrictions for operations on this database.
1582 This DN may or may not be associated with an entry. An empty root
1583 DN (the default) specifies no root access is to be granted. It is
1584 recommended that the rootdn only be specified when needed (such as
1585 when initially populating a database). If the rootdn is within
1586 a namingContext (suffix) of the database, a simple bind password
1587 may also be provided using the
1589 directive. Note that the rootdn is always needed when using syncrepl.
1594 database defaults to
1598 .B olcRootPW: <password>
1599 Specify a password (or hash of the password) for the rootdn. The
1600 password can only be set if the rootdn is within the namingContext
1601 (suffix) of the database.
1602 This option accepts all RFC 2307 userPassword formats known to
1605 description) as well as cleartext.
1607 may be used to generate a hash of a password. Cleartext
1608 and \fB{CRYPT}\fP passwords are not recommended. If empty
1609 (the default), authentication of the root DN is by other means
1610 (e.g. SASL). Use of SASL is encouraged.
1612 .B olcSubordinate: [TRUE | FALSE | advertise]
1613 Specify that the current backend database is a subordinate of another
1614 backend database. A subordinate database may have only one suffix. This
1615 option may be used to glue multiple databases into a single namingContext.
1616 If the suffix of the current database is within the namingContext of a
1617 superior database, searches against the superior database will be
1618 propagated to the subordinate as well. All of the databases
1619 associated with a single namingContext should have identical rootdns.
1620 Behavior of other LDAP operations is unaffected by this setting. In
1621 particular, it is not possible to use moddn to move an entry from
1622 one subordinate to another subordinate within the namingContext.
1624 If the optional \fBadvertise\fP flag is supplied, the naming context of
1625 this database is advertised in the root DSE. The default is to hide this
1626 database context, so that only the superior context is visible.
1633 are used on the superior database, any glued subordinates that support
1634 these tools are opened as well.
1636 Databases that are glued together should usually be configured with the
1637 same indices (assuming they support indexing), even for attributes that
1638 only exist in some of these databases. In general, all of the glued
1639 databases should be configured as similarly as possible, since the intent
1640 is to provide the appearance of a single directory.
1642 Note that the subordinate functionality is implemented internally
1643 by the \fIglue\fP overlay and as such its behavior will interact with other
1644 overlays in use. By default, the glue overlay is automatically configured as
1645 the last overlay on the superior database. Its position on the database
1646 can be explicitly configured by setting an \fBoverlay glue\fP directive
1647 at the desired position. This explicit configuration is necessary e.g.
1648 when using the \fIsyncprov\fP overlay, which needs to follow \fIglue\fP
1649 in order to work over all of the glued databases. E.g.
1652 dn: olcDatabase={1}bdb,cn=config
1653 olcSuffix: dc=example,dc=com
1656 dn: olcOverlay={0}glue,olcDatabase={1}bdb,cn=config
1659 dn: olcOverlay={1}syncprov,olcDatabase={1}bdb,cn=config
1663 See the Overlays section below for more details.
1665 .B olcSuffix: <dn suffix>
1666 Specify the DN suffix of queries that will be passed to this
1667 backend database. Multiple suffix lines can be given and at least one is
1668 required for each database definition.
1670 If the suffix of one database is "inside" that of another, the database
1671 with the inner suffix must come first in the configuration file.
1672 You may also want to glue such databases together with the
1676 .B olcSyncUseSubentry: TRUE | FALSE
1677 Store the syncrepl contextCSN in a subentry instead of the context entry
1678 of the database. The subentry's RDN will be "cn=ldapsync". The default is
1679 FALSE, meaning the contextCSN is stored in the context entry.
1682 .B olcSyncrepl: rid=<replica ID>
1683 .B provider=ldap[s]://<hostname>[:port]
1684 .B searchbase=<base DN>
1685 .B [type=refreshOnly|refreshAndPersist]
1686 .B [interval=dd:hh:mm:ss]
1687 .B [retry=[<retry interval> <# of retries>]+]
1688 .B [filter=<filter str>]
1689 .B [scope=sub|one|base|subord]
1690 .B [attrs=<attr list>]
1691 .B [exattrs=<attr list>]
1693 .B [sizelimit=<limit>]
1694 .B [timelimit=<limit>]
1695 .B [schemachecking=on|off]
1696 .B [network\-timeout=<seconds>]
1697 .B [timeout=<seconds>]
1698 .B [bindmethod=simple|sasl]
1700 .B [saslmech=<mech>]
1701 .B [authcid=<identity>]
1702 .B [authzid=<identity>]
1703 .B [credentials=<passwd>]
1705 .B [secprops=<properties>]
1706 .B [keepalive=<idle>:<probes>:<interval>]
1707 .B [starttls=yes|critical]
1708 .B [tls_cert=<file>]
1710 .B [tls_cacert=<file>]
1711 .B [tls_cacertdir=<path>]
1712 .B [tls_reqcert=never|allow|try|demand]
1713 .B [tls_ciphersuite=<ciphers>]
1714 .B [tls_crlcheck=none|peer|all]
1715 .B [suffixmassage=<real DN>]
1716 .B [logbase=<base DN>]
1717 .B [logfilter=<filter str>]
1718 .B [syncdata=default|accesslog|changelog]
1720 Specify the current database as a replica which is kept up-to-date with the
1721 master content by establishing the current
1723 as a replication consumer site running a
1726 The replica content is kept synchronized to the master content using
1727 the LDAP Content Synchronization protocol. Refer to the
1728 "OpenLDAP Administrator's Guide" for detailed information on
1729 setting up a replicated
1731 directory service using the
1736 identifies the current
1738 directive within the replication consumer site.
1739 It is a non-negative integer having no more than three decimal digits.
1742 specifies the replication provider site containing the master content
1743 as an LDAP URI. If <port> is not given, the standard LDAP port number
1744 (389 or 636) is used.
1748 replica is defined using a search
1749 specification as its result set. The consumer
1751 will send search requests to the provider
1753 according to the search specification. The search specification includes
1754 .B searchbase, scope, filter, attrs, attrsonly, sizelimit,
1757 parameters as in the normal search specification. The
1759 option may also be used to specify attributes that should be omitted
1760 from incoming entries.
1761 The \fBscope\fP defaults to \fBsub\fP, the \fBfilter\fP defaults to
1762 \fB(objectclass=*)\fP, and there is no default \fBsearchbase\fP. The
1763 \fBattrs\fP list defaults to \fB"*,+"\fP to return all user and operational
1764 attributes, and \fBattrsonly\fP and \fBexattrs\fP are unset by default.
1765 The \fBsizelimit\fP and \fBtimelimit\fP only
1766 accept "unlimited" and positive integers, and both default to "unlimited".
1767 Note, however, that any provider-side limits for the replication identity
1768 will be enforced by the provider regardless of the limits requested
1769 by the LDAP Content Synchronization operation, much like for any other
1772 The LDAP Content Synchronization protocol has two operation types.
1775 operation, the next synchronization search operation
1776 is periodically rescheduled at an interval time (specified by
1778 parameter; 1 day by default)
1779 after each synchronization operation finishes.
1781 .B refreshAndPersist
1782 operation, a synchronization search remains persistent in the provider slapd.
1783 Further updates to the master replica will generate
1784 .B searchResultEntry
1785 to the consumer slapd as the search responses to the persistent
1786 synchronization search.
1788 If an error occurs during replication, the consumer will attempt to
1789 reconnect according to the
1791 parameter which is a list of the <retry interval> and <# of retries> pairs.
1792 For example, retry="60 10 300 3" lets the consumer retry every 60 seconds
1793 for the first 10 times and then retry every 300 seconds for the next 3
1794 times before stop retrying. The `+' in <# of retries> means indefinite
1795 number of retries until success.
1797 The schema checking can be enforced at the LDAP Sync
1798 consumer site by turning on the
1800 parameter. The default is off.
1804 parameter sets how long the consumer will wait to establish a
1805 network connection to the provider. Once a connection is
1808 parameter determines how long the consumer will wait for the initial
1809 Bind request to complete. The defaults for these parameters come
1817 requires the options
1821 and should only be used when adequate security services
1822 (e.g. TLS or IPSEC) are in place.
1829 Depending on the mechanism, an authentication identity and/or
1830 credentials can be specified using
1836 parameter may be used to specify an authorization identity.
1837 Specific security properties (as with the
1839 keyword above) for a SASL bind can be set with the
1841 option. A non default SASL realm can be set with the
1844 The provider, other than allow authentication of the syncrepl identity,
1845 should grant that identity appropriate access privileges to the data
1846 that is being replicated (\fBaccess\fP directive), and appropriate time
1847 and size limits (\fBlimits\fP directive).
1851 parameter sets the values of \fIidle\fP, \fIprobes\fP, and \fIinterval\fP
1852 used to check whether a socket is alive;
1854 is the number of seconds a connection needs to remain idle before TCP
1855 starts sending keepalive probes;
1857 is the maximum number of keepalive probes TCP should send before dropping
1860 is interval in seconds between individual keepalive probes.
1861 Only some systems support the customization of these values;
1864 parameter is ignored otherwise, and system-wide settings are used.
1868 parameter specifies use of the StartTLS extended operation
1869 to establish a TLS session before Binding to the provider. If the
1871 argument is supplied, the session will be aborted if the StartTLS request
1872 fails. Otherwise the syncrepl session continues without TLS. The
1873 tls_reqcert setting defaults to "demand" and the other TLS settings
1874 default to the same as the main slapd TLS settings.
1878 parameter allows the consumer to pull entries from a remote directory
1879 whose DN suffix differs from the local directory. The portion of the
1880 remote entries' DNs that matches the \fIsearchbase\fP will be replaced
1881 with the suffixmassage DN.
1883 Rather than replicating whole entries, the consumer can query logs of
1884 data modifications. This mode of operation is referred to as \fIdelta
1885 syncrepl\fP. In addition to the above parameters, the
1889 parameters must be set appropriately for the log that will be used. The
1891 parameter must be set to either "accesslog" if the log conforms to the
1892 .BR slapo\-accesslog (5)
1893 log format, or "changelog" if the log conforms
1894 to the obsolete \fIchangelog\fP format. If the
1896 parameter is omitted or set to "default" then the log parameters are
1900 .B olcUpdateDN: <dn>
1901 This option is only applicable in a slave
1903 It specifies the DN permitted to update (subject to access controls)
1904 the replica. It is only needed in certain push-mode
1905 replication scenarios. Generally, this DN
1911 .B olcUpdateRef: <url>
1912 Specify the referral to pass back when
1914 is asked to modify a replicated local database.
1915 If multiple values are specified, each url is provided.
1917 .SH DATABASE-SPECIFIC OPTIONS
1918 Each database may allow specific configuration options; they are
1919 documented separately in the backends' manual pages. See the
1920 .BR slapd.backends (5)
1921 manual page for an overview of available backends.
1923 An overlay is a piece of
1924 code that intercepts database operations in order to extend or change
1925 them. Overlays are pushed onto
1926 a stack over the database, and so they will execute in the reverse
1927 of the order in which they were configured and the database itself
1928 will receive control last of all.
1930 Overlays must be configured as child entries of a specific database. The
1931 entry's RDN must be of the form
1932 .B olcOverlay={x}<overlaytype>
1933 and the entry must have the olcOverlayConfig objectClass. Normally the
1934 config engine generates the "{x}" index in the RDN automatically, so
1935 it can be omitted when initially loading these entries.
1938 .BR slapd.overlays (5)
1939 manual page for an overview of available overlays.
1942 Here is a short example of a configuration in LDIF suitable for use with
1949 objectClass: olcGlobal
1951 olcPidFile: LOCALSTATEDIR/run/slapd.pid
1952 olcAttributeOptions: x\-hidden lang\-
1954 dn: cn=schema,cn=config
1955 objectClass: olcSchemaConfig
1958 include: SYSCONFDIR/schema/core.ldif
1960 dn: olcDatabase=frontend,cn=config
1961 objectClass: olcDatabaseConfig
1962 objectClass: olcFrontendConfig
1963 olcDatabase: frontend
1964 # Subtypes of "name" (e.g. "cn" and "ou") with the
1965 # option ";x\-hidden" can be searched for/compared,
1966 # but are not shown. See \fBslapd.access\fP(5).
1967 olcAccess: to attrs=name;x\-hidden by * =cs
1968 # Protect passwords. See \fBslapd.access\fP(5).
1969 olcAccess: to attrs=userPassword by * auth
1970 # Read access to other attributes and entries.
1971 olcAccess: to * by * read
1973 # set a rootpw for the config database so we can bind.
1974 # deny access to everyone else.
1975 dn: olcDatabase=config,cn=config
1976 objectClass: olcDatabaseConfig
1978 olcRootPW: {SSHA}XKYnrjvGT3wZFQrDD5040US592LxsdLy
1979 olcAccess: to * by * none
1981 dn: olcDatabase=bdb,cn=config
1982 objectClass: olcDatabaseConfig
1983 objectClass: olcBdbConfig
1985 olcSuffix: "dc=our\-domain,dc=com"
1986 # The database directory MUST exist prior to
1987 # running slapd AND should only be accessible
1988 # by the slapd/tools. Mode 0700 recommended.
1989 olcDbDirectory: LOCALSTATEDIR/openldap\-data
1990 # Indices to maintain
1991 olcDbIndex: objectClass eq
1992 olcDbIndex: cn,sn,mail pres,eq,approx,sub
1994 # We serve small clients that do not handle referrals,
1995 # so handle remote lookups on their behalf.
1996 dn: olcDatabase=ldap,cn=config
1997 objectClass: olcDatabaseConfig
1998 objectClass: olcLdapConfig
2001 olcDbUri: ldap://ldap.some\-server.com/
2005 Assuming the above data was saved in a file named "config.ldif" and the
2006 ETCDIR/slapd.d directory has been created, this command will initialize
2010 slapadd \-F ETCDIR/slapd.d \-n 0 \-l config.ldif
2015 "OpenLDAP Administrator's Guide" contains a longer annotated
2016 example of a slapd configuration.
2018 Alternatively, an existing slapd.conf file can be converted to the new
2019 format using slapd or any of the slap tools:
2022 slaptest \-f ETCDIR/slapd.conf \-F ETCDIR/slapd.d
2029 default slapd configuration file
2032 default slapd configuration directory
2036 .BR gnutls\-cli (1),
2037 .BR slapd.access (5),
2038 .BR slapd.backends (5),
2040 .BR slapd.overlays (5),
2041 .BR slapd.plugin (5),
2042 .BR slapd.replog (5),
2053 "OpenLDAP Administrator's Guide" (http://www.OpenLDAP.org/doc/admin/)
2054 .SH ACKNOWLEDGEMENTS