1 .TH SLAPD.CONF 5 "RELEASEDATE" "OpenLDAP LDVERSION"
2 .\" Copyright 1998-2004 The OpenLDAP Foundation All Rights Reserved.
3 .\" Copying restrictions apply. See COPYRIGHT/LICENSE.
6 slapd.conf \- configuration file for slapd, the stand-alone LDAP daemon
12 contains configuration information for the
14 daemon. This configuration file is also used by the
16 replication daemon and by the SLAPD tools
24 file consists of a series of global configuration options that apply to
26 as a whole (including all backends), followed by zero or more database
27 backend definitions that contain information specific to a backend
35 # comment - these options apply to every database
36 <global configuration options>
37 # first database definition & configuration options
38 database <backend 1 type>
39 <configuration options specific to backend 1>
40 # subsequent database definitions & configuration options
44 As many backend-specific sections as desired may be included. Global
45 options can be overridden in a backend (for options that appear more
46 than once, the last appearance in the
50 If a line begins with white space, it is considered a continuation
51 of the previous line. Blank lines and comment lines beginning with
52 a `#' character are ignored. (Note: continuation lines are unwrapped
53 before comment processing is applied.)
55 Arguments on configuration lines are separated by white space. If an
56 argument contains white space, the argument should be enclosed in
57 double quotes. If an argument contains a double quote (`"') or a
58 backslash character (`\\'), the character should be preceded by a
61 The specific configuration options available are discussed below in the
62 Global Configuration Options, General Backend Options, and General Database
63 Options. Backend-specific options are discussed in the
65 manual pages. Refer to the "OpenLDAP Administrator's Guide" for more
66 details on the slapd configuration file.
67 .SH GLOBAL CONFIGURATION OPTIONS
68 Options described in this section apply to all backends, unless specifically
69 overridden in a backend definition. Arguments that should be replaced by
70 actual text are shown in brackets <>.
72 .B access to <what> "[ by <who> <access> <control> ]+"
73 Grant access (specified by <access>) to a set of entries and/or
74 attributes (specified by <what>) by one or more requestors (specified
78 and the "OpenLDAP's Administrator's Guide" for details.
81 Specify a set of features (separated by white space) to
84 allows acceptance of LDAPv2 bind requests. Note that
86 does not truly implement LDAPv2 (RFC 1777), now Historic (RFC 3494).
88 allows anonymous bind when credentials are not empty (e.g.
91 allows unauthenticated (anonymous) bind when DN is not empty.
93 allow unauthenticated (anonymous) update operations to be processed
94 (subject to access controls and other administrative limits).
96 .B argsfile <filename>
97 The ( absolute ) name of a file that will hold the
99 server's command line options
100 if started without the debugging command line option.
102 .B attributeoptions [option-name]...
103 Define tagging attribute options or option tag/range prefixes.
104 Options must not end with `-', prefixes must end with `-'.
105 The `lang-' prefix is predefined.
108 directive, `lang-' will no longer be defined and you must specify it
109 explicitly if you want it defined.
111 An attribute description with a tagging option is a subtype of that
112 attribute description without the option.
113 Except for that, options defined this way have no special semantics.
114 Prefixes defined this way work like the `lang-' options:
115 They define a prefix for tagging options starting with the prefix.
116 That is, if you define the prefix `x-foo-', you can use the option
118 Furthermore, in a search or compare, a prefix or range name (with
119 a trailing `-') matches all options starting with that name, as well
120 as the option with the range name sans the trailing `-'.
121 That is, `x-foo-bar-' matches `x-foo-bar' and `x-foo-bar-baz'.
123 RFC 2251 reserves options beginning with `x-' for private experiments.
124 Other options should be registered with IANA, see RFC 3383 section 3.4.
125 OpenLDAP also has the `binary' option built in, but this is a transfer
126 option, not a tagging option.
129 .B attributetype "(\ <oid>\
131 [DESC\ <description>]\
140 [NO\-USER\-MODIFICATION]\
141 [USAGE\ <attributeUsage>]\ )"
143 Specify an attribute type using the LDAPv3 syntax defined in RFC 2252.
144 The slapd parser extends the RFC 2252 definition by allowing string
145 forms as well as numeric OIDs to be used for the attribute OID and
146 attribute syntax OID.
152 .B concurrency <integer>
153 Specify a desired level of concurrency. Provided to the underlying
154 thread system as a hint. The default is not to provide any hint.
156 .B conn_max_pending <integer>
157 Specify the maximum number of pending requests for an anonymous session.
158 If requests are submitted faster than the server can process them, they
159 will be queued up to this limit. If the limit is exceeded, the session
160 is closed. The default is 100.
162 .B conn_max_pending_auth <integer>
163 Specify the maximum number of pending requests for an authenticated session.
165 .\"-- NEW_LOGGING option --
167 .\".B debug <subsys> <level>
168 .\"Specify a logging level for a particular subsystem. The subsystems include
170 .\"a global level for all subsystems,
174 .\"the backend databases,
176 .\"the entry cache manager,
178 .\"the config file reader,
180 .\"the connection manager,
182 .\"the Cyrus SASL library interface,
184 .\"the search filter processor,
186 .\"the DN normalization library,
188 .\"the database indexer,
190 .\"the ASN.1 BER library,
192 .\"the dynamic module loader,
194 .\"the LDAP operation processors,
196 .\"the SASL authentication subsystem,
198 .\"the schema processor, and
200 .\"the TLS library interface. This is not an exhaustive list; there are many
201 .\"other subsystems and more are added over time.
203 .\"The levels are, in order of decreasing priority:
204 .\".B emergency, alert, critical, error, warning, notice, information, entry,
205 .\".B args, results, detail1, detail2
206 .\"An integer may be used instead, with 0 corresponding to
212 .\"level logs function entry points,
214 .\"adds function call parameters, and
216 .\"adds the function results to the logs.
221 .\"levels add even more low level detail from individual functions.
223 .B defaultsearchbase <dn>
224 Specify a default search base to use when client submits a
225 non-base search request with an empty base DN.
227 .B disallow <features>
228 Specify a set of features (separated by white space) to
229 disallow (default none).
231 disables acceptance of anonymous bind requests.
233 disables simple (bind) authentication.
235 disables Kerberos V4 (bind) authentication.
237 disables Start TLS from forcing session to anonymous status (see also
240 disables StartTLS if authenticated (see also
244 .B ditcontentrule "(\ <oid>\
246 [DESC\ <description>]\
253 Specify an DIT Content Rule using the LDAPv3 syntax defined in RFC 2252.
254 The slapd parser extends the RFC 2252 definition by allowing string
255 forms as well as numeric OIDs to be used for the attribute OID and
256 attribute syntax OID.
262 .B gentlehup { on | off }
263 A SIGHUP signal will only cause a 'gentle' shutdown-attempt:
265 will stop listening for new connections, but will not close the
266 connections to the current clients. Future write operations return
267 unwilling-to-perform, though. Slapd terminates when all clients
268 have closed their connections (if they ever do), or \- as before \-
269 if it receives a SIGTERM signal. This can be useful if you wish to
270 terminate the server and start a new
273 .B with another database,
274 without disrupting the currently active clients.
275 The default is off. You may wish to use
277 along with this option.
279 .B idletimeout <integer>
280 Specify the number of seconds to wait before forcibly closing
281 an idle client connection. A idletimeout of 0 disables this
282 feature. The default is 0.
284 .B include <filename>
285 Read additional configuration information from the given file before
286 continuing with the next line of the current file.
288 .B limits <who> <limit> [<limit> [...]]
289 Specify time and size limits based on who initiated an operation.
296 anonymous | users | [dn[.<style>]=]<pattern> | group[/oc[/at]]=<pattern>
302 <style> ::= exact | base | onelevel | subtree | children | regex | anonymous
307 matches all unauthenticated clients.
310 matches all authenticated clients;
313 dn pattern is assumed unless otherwise specified by qualifying
314 the (optional) key string
320 (which are synonyms), to require an exact match; with
322 to require exactly one level of depth match; with
324 to allow any level of depth match, including the exact match; with
326 to allow any level of depth match, not including the exact match;
328 explicitly requires the (default) match based on regular expression
329 pattern, as detailed in
333 matches unbound operations; the
336 The same behavior is obtained by using the
343 with the optional objectClass
349 sets the limits for any DN listed in the values of the
355 group objectClass (default
357 whose DN exactly matches
360 The currently supported limits are
365 The syntax for time limits is
366 .BR time[.{soft|hard}]=<integer> ,
369 is the number of seconds slapd will spend answering a search request.
370 If no time limit is explicitly requested by the client, the
372 limit is used; if the requested time limit exceeds the
375 .I \"Administrative limit exceeded\"
379 limit is set to 0 or to the keyword
381 the soft limit is used in either case; if it is set to
385 no hard limit is enforced.
386 Explicit requests for time limits smaller or equal to the
389 If no flag is set, the value is assigned to the
393 limit is set to zero, to preserve the original behavior.
395 The syntax for size limits is
396 .BR size[.{soft|hard|unchecked}]=<integer> ,
399 is the maximum number of entries slapd will return answering a search
401 If no size limit is explicitly requested by the client, the
403 limit is used; if the requested size limit exceeds the
406 .I \"Administrative limit exceeded\"
410 limit is set to 0 or to the keyword
412 the soft limit is used in either case; if it is set to
416 no hard limit is enforced.
417 Explicit requests for size limits smaller or equal to the
422 flag sets a limit on the number of candidates a search request is allowed
424 If the selected candidates exceed the
426 limit, the search will abort with
427 .IR \"Unwilling to perform\" .
432 no limit is applied (the default).
435 the search is not even performed; this can be used to disallow searches
436 for a specific set of users.
437 If no flag is set, the value is assigned to the
441 limit is set to zero, to preserve the original behavior.
443 In case of no match, the global limits are used.
444 The default values are the same of
453 control is defined, additional size limits may be enforced; the syntax is
454 .BR size.pr={<integer>|noEstimate|disabled|none} ,
457 is the max page size if no explicit limit is set; the keyword
459 inhibits the server to return an estimate of the total number
460 of entries that will be returned; the keyword
462 disables the control; the keyword
464 indicates that no limit is applied to the pagedResults control page size.
466 .B size.prtotal={<integer>|none}
467 allows to set a limit on the total number of entries that a pagedResults
468 control allows to return.
469 By default it is unlimited, which is indicated by the keyword
473 is the max number of entries that the whole search with pagedResults control
476 .\"-- NEW_LOGGING option --
478 .\".B logfile <filename>
479 .\"Specify a file for recording debug log messages. By default these messages
480 .\"only go to stderr and are not recorded anywhere else. Specifying a logfile
481 .\"copies messages to both stderr and the logfile.
483 .B loglevel <integer>
484 Specify the level at which debugging statements and operation
485 statistics should be syslogged (currently logged to the
487 LOG_LOCAL4 facility). Log levels are additive, and available levels
497 debug packet handling
500 heavy trace debugging
503 connection management
506 print out packets sent and received
509 search filter processing
512 configuration file processing
515 access control list processing
518 stats log connections/operations/results
521 stats log entries sent
524 print communication with shell backends
532 .B moduleload <filename>
533 Specify the name of a dynamically loadable module to load. The filename
534 may be an absolute path name or a simple filename. Non-absolute names
535 are searched for in the directories specified by the
537 option. This option and the
539 option are only usable if slapd was compiled with --enable-modules.
541 .B modulepath <pathspec>
542 Specify a list of directories to search for loadable modules. Typically
543 the path is colon-separated but this depends on the operating system.
546 .B objectclass "(\ <oid>\
548 [DESC\ <description]\
551 [{ ABSTRACT | STRUCTURAL | AUXILIARY }]\
552 [MUST\ <oids>] [MAY\ <oids>] )"
554 Specify an objectclass using the LDAPv3 syntax defined in RFC 2252.
555 The slapd parser extends the RFC 2252 definition by allowing string
556 forms as well as numeric OIDs to be used for the object class OID.
560 description.) Object classes are "STRUCTURAL" by default.
563 .B objectidentifier <name> "{ <oid> | <name>[:<suffix>] }"
564 Define a string name that equates to the given OID. The string can be used
565 in place of the numeric OID in objectclass and attribute definitions. The
566 name can also be used with a suffix of the form ":xx" in which case the
567 value "oid.xx" will be used.
569 .B password-hash <hash> [<hash>...]
570 This option configures one or more hashes to be used in generation of user
571 passwords stored in the userPassword attribute during processing of
572 LDAP Password Modify Extended Operations (RFC 3062).
573 The <hash> must be one of
587 use the SHA-1 algorithm (FIPS 160-1), the latter with a seed.
592 use the MD5 algorithm (RFC 1321), the latter with a seed.
599 indicates that the new password should be
600 added to userPassword as clear text.
602 Note that this option does not alter the normal user applications
603 handling of userPassword during LDAP Add, Modify, or other LDAP operations.
605 .B password\-crypt\-salt\-format <format>
606 Specify the format of the salt passed to
608 when generating {CRYPT} passwords (see
610 during processing of LDAP Password Modify Extended Operations (RFC 3062).
612 This string needs to be in
614 format and may include one (and only one) %s conversion.
615 This conversion will be substituted with a string random
616 characters from [A\-Za\-z0\-9./]. For example, "%.2s"
617 provides a two character salt and "$1$%.8s" tells some
618 versions of crypt(3) to use an MD5 algorithm and provides
619 8 random characters of salt. The default is "%s", which
620 provides 31 characters of salt.
622 .B pidfile <filename>
623 The ( absolute ) name of a file that will hold the
625 server's process ID ( see
627 ) if started without the debugging command line option.
630 Specify the referral to pass back when
632 cannot find a local database to handle a request.
633 If specified multiple times, each url is provided.
636 The ( absolute ) name of a file that will hold the
638 server's command line options
639 if started without the debugging command line option.
642 The ( absolute ) name of a file that will hold the
644 server's process ID ( see
646 ) if started without the debugging command line option.
648 .B replicationinterval
649 The number of seconds
651 waits before checking the replogfile for changes.
653 .B require <conditions>
654 Specify a set of conditions (separated by white space) to
655 require (default none).
656 The directive may be specified globally and/or per-database.
658 requires bind operation prior to directory operations.
660 requires session to be using LDAP version 3.
662 requires authentication prior to directory operations.
664 requires SASL authentication prior to directory operations.
666 requires strong authentication prior to directory operations.
667 The strong keyword allows protected "simple" authentication
668 as well as SASL authentication.
670 may be used to require no conditions (useful for clearly globally
671 set conditions within a particular database).
673 .B reverse-lookup on | off
674 Enable/disable client name unverified reverse lookup (default is
676 if compiled with --enable-rlookups).
679 Specify the name of an LDIF(5) file containing user defined attributes
680 for the root DSE. These attributes are returned in addition to the
681 attributes normally produced by slapd.
683 .B sasl-authz-policy <policy>
684 Used to specify which rules to use for SASL Proxy Authorization. Proxy
685 authorization allows a client to authenticate to the server using one
686 user's credentials, but specify a different identity to use for authorization
687 and access control purposes. It essentially allows user A to login as user
688 B, using user A's password.
691 flag disables proxy authorization. This is the default setting.
694 flag will use rules in the
696 attribute of the authorization DN.
699 flag will use rules in the
701 attribute of the authentication DN.
704 flag, an alias for the deprecated value of
706 will allow any of the above, whatever succeeds first (checked in
712 flag requires both authorizations to succeed.
713 The rules are simply regular expressions specifying which DNs are allowed
714 to perform proxy authorization.
717 attribute in an entry specifies which other users
718 are allowed to proxy login to this entry. The
721 an entry specifies which other users this user can authorize as. Use of
724 abused if users are allowed to write arbitrary values to this attribute.
727 attribute must be protected with ACLs such that
728 only privileged users can modify it.
735 or a set of identities; it can take three forms:
739 .B ldap:///<base>??[<scope>]?<filter>
742 .B dn[.<dnstyle>]:<pattern>
745 .B u[<mech>[<realm>]]:<pattern>
752 .B <dnstyle>:={exact|onelevel|children|subtree|regex}
755 The first form is a valid LDAP
763 portions must be absent, so that the search occurs locally on either
769 with the optional style modifiers
775 for exact, onelevel, children and subtree matches, which cause
777 to be normalized according to the DN normalization rules, or the special
781 to be compiled according to
783 The third form is a SASL
785 with the optional fields
789 that allow to specify a SASL
791 and eventually a SASL
793 for those mechanisms that support one.
794 The need to allow the specification of a mechanism is still debated,
795 and users are strongly discouraged to rely on this possibility.
796 For backwards compatibility, if no identity type is provided, i.e. only
800 is assumed; as a consequence,
802 is subjected to DN normalization.
803 Since the interpretation of
807 can impact security, users are strongly encouraged
808 to explicitly set the type of identity specification that is being used.
812 Used to specify the fully qualified domain name used for SASL processing.
814 .B sasl-realm <realm>
815 Specify SASL realm. Default is empty.
817 .B sasl-regexp <match> <replace>
818 Used by the SASL mechanism to convert a SASL authenticated
819 username to an LDAP DN used for authorization purposes. Note that
820 the resultant DN need not refer to an existing entry to be considered
821 valid. When an authorization request is received, the SASL
825 are taken, when available, and combined into a SASL name of the
830 .B UID=<username>[[,CN=<realm>],CN=<mechanism>,]CN=auth
833 This SASL name is then compared against the
835 regular expression, and if the match is successful, the SASL name is
838 string. If there are wildcard strings in the
840 regular expression that are enclosed in parenthesis, e.g.
846 then the portion of the SASL name that matched the wildcard will be stored
847 in the numbered placeholder variable $1. If there are other wildcard strings
848 in parenthesis, the matching strings will be in $2, $3, etc. up to $9. The
849 placeholders can then be used in the
854 .B UID=$1,OU=Accounts,DC=example,DC=com
857 The replaced SASL name can be either a DN or an LDAP URI. If the
858 latter, the server will use the URI to search its own database(s)
859 and, if the search returns exactly one entry, the SASL name is
860 replaced by the DN of that entry. The LDAP URI must have no
861 hostport, attrs, or extensions components, e.g.
864 .B ldap:///OU=Accounts,DC=example,DC=com??one?(UID=$1)
869 options can be given in the configuration file to allow for multiple matching
870 and replacement patterns. The matching patterns are checked in the order they
871 appear in the file, stopping at the first successful match.
874 .\"Because the plus sign + is a character recognized by the regular expression engine,
875 .\"and it will appear in SASL names that include a REALM, be careful to escape the
876 .\"plus sign with a backslash \\+ to remove the character's special meaning.
879 .B sasl-secprops <properties>
880 Used to specify Cyrus SASL security properties.
883 flag (without any other properties) causes the flag properties
884 default, "noanonymous,noplain", to be cleared.
887 flag disables mechanisms susceptible to simple passive attacks.
890 flag disables mechanisms susceptible to active attacks.
893 flag disables mechanisms susceptible to passive dictionary attacks.
896 flag disables mechanisms which support anonymous login.
899 flag require forward secrecy between sessions.
902 require mechanisms which pass client credentials (and allow
903 mechanisms which can pass credentials to do so).
906 property specifies the minimum acceptable
907 .I security strength factor
908 as an integer approximate to effective key length used for
909 encryption. 0 (zero) implies no protection, 1 implies integrity
910 protection only, 56 allows DES or other weak ciphers, 112
911 allows triple DES and other strong ciphers, 128 allows RC4,
912 Blowfish and other modern strong ciphers. The default is 0.
915 property specifies the maximum acceptable
916 .I security strength factor
917 as an integer (see minssf description). The default is INT_MAX.
920 property specifies the maximum security layer receive buffer
921 size allowed. 0 disables security layers. The default is 65536.
924 Specify the distinguished name for the subschema subentry that
925 controls the entries on this server. The default is "cn=Subschema".
927 .B security <factors>
928 Specify a set of factors (separated by white space) to require.
929 An integer value is associated with each factor and is roughly
930 equivalent of the encryption key length to require. A value
931 of 112 is equivalent to 3DES, 128 to Blowfish, etc..
932 The directive may be specified globally and/or per-database.
934 specifies the overall security strength factor.
936 specifies the transport security strength factor.
938 specifies the TLS security strength factor.
940 specifies the SASL security strength factor.
942 specifies the overall security strength factor to require for
944 .B update_transport=<n>
945 specifies the transport security strength factor to require for
948 specifies the TLS security strength factor to require for
951 specifies the SASL security strength factor to require for
954 specifies the security strength factor required for
956 username/password authentication.
959 factor is measure of security provided by the underlying transport,
960 e.g. ldapi:// (and eventually IPSEC). It is not normally used.
962 .B sizelimit {<integer>|unlimited}
964 .B sizelimit size[.{soft|hard|unchecked}]=<integer> [...]
965 Specify the maximum number of entries to return from a search operation.
966 The default size limit is 500.
971 to specify no limits.
972 The second format allows a fine grain setting of the size limits.
973 Extra args can be added on the same line.
976 for an explanation of the different flags.
978 .B sockbuf_max_incoming <integer>
979 Specify the maximum incoming LDAP PDU size for anonymous sessions.
980 The default is 262143.
982 .B sockbuf_max_incoming_auth <integer>
983 Specify the maximum incoming LDAP PDU size for authenticated sessions.
984 The default is 4194303.
987 Specify the srvtab file in which the kerberos keys necessary for
988 authenticating clients using kerberos can be found. This option is only
989 meaningful if you are using Kerberos authentication.
992 Specify the maximum size of the primary thread pool.
995 .B timelimit {<integer>|unlimited}
997 .B timelimit time[.{soft|hard}]=<integer> [...]
998 Specify the maximum number of seconds (in real time)
1000 will spend answering a search request. The default time limit is 3600.
1005 to specify no limits.
1006 The second format allows a fine grain setting of the time limits.
1007 Extra args can be added on the same line.
1010 for an explanation of the different flags.
1012 .B ucdata-path <path>
1013 Specify the path to the directory containing the Unicode character
1014 tables. The default path is DATADIR/ucdata.
1018 is built with support for Transport Layer Security, there are more options
1021 .B TLSCipherSuite <cipher-suite-spec>
1022 Permits configuring what ciphers will be accepted and the preference order.
1023 <cipher-suite-spec> should be a cipher specification for OpenSSL. Example:
1025 TLSCipherSuite HIGH:MEDIUM:+SSLv2
1027 To check what ciphers a given spec selects, use:
1029 openssl ciphers -v <cipher-suite-spec>
1031 .B TLSCACertificateFile <filename>
1032 Specifies the file that contains certificates for all of the Certificate
1037 .B TLSCACertificatePath <path>
1038 Specifies the path of a directory that contains Certificate Authority
1039 certificates in separate individual files. Usually only one of this
1040 or the TLSCACertificateFile is used.
1042 .B TLSCertificateFile <filename>
1043 Specifies the file that contains the
1047 .B TLSCertificateKeyFile <filename>
1048 Specifies the file that contains the
1050 server private key that matches the certificate stored in the
1051 .B TLSCertificateFile
1052 file. Currently, the private key must not be protected with a password, so
1053 it is of critical importance that it is protected carefully.
1055 .B TLSRandFile <filename>
1056 Specifies the file to obtain random bits from when /dev/[u]random
1057 is not available. Generally set to the name of the EGD/PRNGD socket.
1058 The environment variable RANDFILE can also be used to specify the filename.
1060 .B TLSVerifyClient <level>
1061 Specifies what checks to perform on client certificates in an
1062 incoming TLS session, if any.
1065 can be specified as one of the following keywords:
1069 This is the default.
1071 will not ask the client for a certificate.
1074 The client certificate is requested. If no certificate is provided,
1075 the session proceeds normally. If a bad certificate is provided,
1076 it will be ignored and the session proceeds normally.
1079 The client certificate is requested. If no certificate is provided,
1080 the session proceeds normally. If a bad certificate is provided,
1081 the session is immediately terminated.
1083 .B demand | hard | true
1084 These keywords are all equivalent, for compatibility reasons.
1085 The client certificate is requested. If no certificate is provided,
1086 or a bad certificate is provided, the session is immediately terminated.
1088 Note that a valid client certificate is required in order to use the
1089 SASL EXTERNAL authentication mechanism with a TLS session. As such,
1092 setting must be chosen to enable SASL EXTERNAL authentication.
1094 .SH GENERAL BACKEND OPTIONS
1095 Options in this section only apply to the configuration file section
1096 for the specified backend. They are supported by every
1099 .B backend <databasetype>
1100 Mark the beginning of a backend definition. <databasetype>
1115 depending on which backend will serve the database.
1117 .SH GENERAL DATABASE OPTIONS
1118 Options in this section only apply to the configuration file section
1119 for the database in which they are defined. They are supported by every
1120 type of backend. Note that the
1124 option are mandatory for each database.
1126 .B database <databasetype>
1127 Mark the beginning of a new database instance definition. <databasetype>
1142 depending on which backend will serve the database.
1147 will automatically maintain the
1148 modifiersName, modifyTimestamp, creatorsName, and
1149 createTimestamp attributes for entries. By default, lastmod is on.
1151 .B maxderefdepth <depth>
1152 Specifies the maximum number of aliases to dereference when trying to
1153 resolve an entry, used to avoid infinite alias loops. The default is 1.
1155 .B overlay <overlay-name>
1156 Add the specified overlay to this database. An overlay is a piece of
1157 code that intercepts database operations in order to extend or change
1158 them. Overlays are pushed onto
1159 a stack over the database, and so they will execute in the reverse
1160 of the order in which they were configured and the database itself
1161 will receive control last of all.
1163 .B readonly on | off
1164 This option puts the database into "read-only" mode. Any attempts to
1165 modify the database will return an "unwilling to perform" error. By
1166 default, readonly is off.
1169 .B replica uri=ldap[s]://<hostname>[:port]|host=<hostname>[:port]
1170 .B [starttls=yes|critical]
1171 .B [suffix=<suffix> [...]]
1172 .B bindmethod=simple|sasl [binddn=<simple DN>] [credentials=<simple password>]
1173 .B [saslmech=<SASL mech>] [secprops=<properties>] [realm=<realm>]
1174 .B [authcId=<authentication ID>] [authzId=<authorization ID>]
1175 .B [attr[!]=<attr list>]
1177 Specify a replication site for this database. Refer to the "OpenLDAP
1178 Administrator's Guide" for detailed information on setting up a replicated
1180 directory service. Zero or more
1182 instances can be used to select the subtrees that will be replicated
1183 (defaults to all the database).
1185 is deprecated in favor of the
1189 allows the replica LDAP server to be specified as an LDAP URI.
1194 requires the options
1198 and should only be used when adequate security services
1199 (e.g TLS or IPSEC) are in place. A
1205 Specific security properties (as with the
1207 keyword above) for a SASL bind can be set with the
1209 option. A non-default SASL realm can be set with the
1214 will use Kerberos, a kerberos instance should be given in
1218 can be given after the
1220 keyword to allow the selective replication of the listed attributes only;
1223 mark is used, the list is considered exclusive, i.e. the listed attributes
1225 If an objectClass is listed, all the related attributes
1226 are (are not) replicated.
1229 .B replogfile <filename>
1230 Specify the name of the replication log file to log changes to.
1231 The replication log is typically written by
1236 .BR slapd.replog (5)
1237 for more information. The specified file should be located
1238 in a directory with limited read/write/execute access as the replication
1239 logs may contain sensitive information.
1242 Specify the distinguished name that is not subject to access control
1243 or administrative limit restrictions for operations on this database.
1244 This DN may or may not be associated with an entry. An empty root
1245 DN (the default) specifies no root access is to be granted. It is
1246 recommended that the rootdn only be specified when needed (such as
1247 when initially populating a database). If the rootdn is within
1248 a namingContext (suffix) of the database, a simple bind password
1249 may also be provided using the
1253 .B rootpw <password>
1254 Specify a password (or hash of the password) for the rootdn. The
1255 password can only be set if the rootdn is within the namingContext
1256 (suffix) of the database.
1257 This option accepts all RFC 2307 userPassword formats known to
1260 description) as well as cleartext.
1262 may be used to generate a hash of a password. Cleartext
1263 and \fB{CRYPT}\fP passwords are not recommended. If empty
1264 (the default), authentication of the root DN is by other means
1265 (e.g. SASL). Use of SASL is encouraged.
1267 .B suffix <dn suffix>
1268 Specify the DN suffix of queries that will be passed to this
1269 backend database. Multiple suffix lines can be given and at least one is
1270 required for each database definition.
1271 If the suffix of one database is "inside" that of another, the database
1272 with the inner suffix must come first in the configuration file.
1275 Specify that the current backend database is a subordinate of another
1276 backend database. A subordinate database may have only one suffix. This
1277 option may be used to glue multiple databases into a single namingContext.
1278 If the suffix of the current database is within the namingContext of a
1279 superior database, searches against the superior database will be
1280 propagated to the subordinate as well. All of the databases
1281 associated with a single namingContext should have identical rootdns.
1282 Behavior of other LDAP operations is unaffected by this setting. In
1283 particular, it is not possible to use moddn to move an entry from
1284 one subordinate to another subordinate within the namingContext.
1287 .B syncrepl rid=<replica ID>
1288 .B provider=ldap[s]://<hostname>[:port]
1289 .B [type=refreshOnly|refreshAndPersist]
1290 .B [interval=dd:hh:mm:ss]
1291 .B [searchbase=<base DN>]
1292 .B [filter=<filter str>]
1293 .B [scope=sub|one|base]
1294 .B [attrs=<attr list>]
1296 .B [sizelimit=<limit>]
1297 .B [timelimit=<limit>]
1298 .B [schemachecking=on|off]
1300 .B [bindmethod=simple|sasl]
1302 .B [saslmech=<mech>]
1303 .B [authcid=<identity>]
1304 .B [authzid=<identity>]
1305 .B [credentials=<passwd>]
1307 .B [secprops=<properties>]
1309 Specify the current database as a replica which is kept up-to-date with the
1310 master content by establishing the current
1312 as a replication consumer site running a
1315 The replica content is kept synchronized to the master content using
1316 the LDAP Content Synchronization protocol. Refer to the
1317 "OpenLDAP Administrator's Guide" for detailed information on
1318 setting up a replicated
1320 directory service using the
1324 identifies the current
1326 directive within the replication consumer site.
1327 It is a non-negative integer having no more than three digits.
1329 specifies the replication provider site containing the master content
1330 as an LDAP URI. If <port> is not given, the standard LDAP port number
1331 (389 or 636) is used. The content of the
1333 replica is defined using a search
1334 specification as its result set. The consumer
1336 will send search requests to the provider
1338 according to the search specification. The search specification includes
1339 .B searchbase, scope, filter, attrs, attrsonly, sizelimit,
1342 parameters as in the normal search specification.
1343 The search specification for the LDAP Content Synchronization operation
1344 has the same value syntax and the same default values as in the
1347 The LDAP Content Synchronization protocol has two operation types.
1350 operation, the next synchronization search operation
1351 is periodically rescheduled at an interval time (specified by
1353 parameter; 1 day by default)
1354 after each synchronization operation finishes.
1356 .B refreshAndPersist
1357 operation, a synchronization search remains persistent in the provider slapd.
1358 Further updates to the master replica will generate
1359 .B searchResultEntry
1360 to the consumer slapd as the search responses to the persistent
1361 synchronization search. The schema checking can be enforced at the LDAP Sync
1362 consumer site by turning on the
1364 parameter. The default is off.
1367 parameter specifies the DN in the consumer site
1368 which is allowed to make changes to the replica.
1369 The DN should have read/write access to the replica database.
1374 of the master database.
1379 requires the options
1383 and should only be used when adequate security services
1384 (e.g. TLS or IPSEC) are in place.
1391 Depending on the mechanism, an authentication identity and/or
1392 credentials can be specified using
1398 parameter may be used to specify an authorization identity.
1399 Specific security properties (as with the
1401 keyword above) for a SASL bind can be set with the
1403 option. A non default SASL realm can be set with the
1409 This option is only applicable in a slave
1410 database updated using
1412 It specifies the DN permitted to update (subject to access controls)
1413 the replica (typically, this is the DN
1415 binds to update the replica). Generally, this DN
1422 Specify the referral to pass back when
1424 is asked to modify a replicated local database.
1425 If specified multiple times, each url is provided.
1427 .SH DATABASE-SPECIFIC OPTIONS
1428 Each database may allow specific configuration options; they are
1429 documented separately in the backends' manual pages.
1431 The following backends can be compiled into slapd.
1432 They are documented in the
1433 .BR slapd-<backend> (5)
1437 This is the recommended backend for a normal slapd database.
1438 However, it takes more care than with the LDBM backend to configure
1440 It uses the Sleepycat Berkeley DB (BDB) package to store data.
1443 This is the database backend which is easiest to configure.
1444 However, it does not offer the data durability features of the BDB
1446 It uses Berkeley DB or GDBM to store data.
1449 This backend is experimental.
1450 It serves up referrals based upon SRV resource records held in the
1454 This backend acts as a proxy to forward incoming requests to another
1458 This backend performs basic LDAP proxying with respect to a set of
1459 remote LDAP servers. It is an enhancement of the ldap backend. The
1460 proxy cache extension of meta backend provides answering of search
1461 requests from the proxy using results of previously cached requests.
1464 This backend provides information about the running status of the slapd
1468 Operations in this backend succeed but do nothing.
1471 This backend is provided for demonstration purposes only.
1472 It serves up user account information from the system
1477 This backend embeds a
1479 interpreter into slapd.
1480 It runs Perl subroutines to implement LDAP operations.
1483 This backend executes external programs to implement LDAP operations.
1484 It is is primarily intended to be used in prototypes.
1487 This backend is experimental.
1488 It services LDAP requests from an SQL database.
1491 This backend is experimental.
1494 interpreter into slapd.
1495 It runs Tcl commands to implement LDAP operations.
1498 Here is a short example of a configuration file:
1502 include SYSCONFDIR/schema/core.schema
1503 pidfile LOCALSTATEDIR/slapd.pid
1505 # Subtypes of "name" (e.g. "cn" and "ou") with the
1506 # option ";x-hidden" can be searched for/compared,
1507 # but are not shown. See \fBslapd.access\fP(5).
1508 attributeoptions x-hidden lang-
1509 access to attr=name;x-hidden by * =cs
1512 suffix "dc=our-domain,dc=com"
1513 # The database directory MUST exist prior to
1514 # running slapd AND should only be accessible
1515 # by the slapd/tools. Mode 0700 recommended.
1516 directory LOCALSTATEDIR/openldap-data
1517 # Indices to maintain
1518 index objectClass eq
1519 index cn,sn,mail pres,eq,approx,sub
1521 # We serve small clients that do not handle referrals,
1522 # so handle remote lookups on their behalf.
1525 uri ldap://ldap.some-server.com/
1530 "OpenLDAP Administrator's Guide" contains a longer annotated
1531 example of a configuration file.
1532 The original ETCDIR/slapd.conf is another example.
1536 default slapd configuration file
1540 .BR slapd-dnssrv (5),
1544 .BR slapd-monitor (5),
1546 .BR slapd-passwd (5),
1548 .BR slapd-shell (5),
1551 .BR slapd.access (5),
1552 .BR slapd.plugin (5),
1553 .BR slapd.replog (5),
1561 "OpenLDAP Administrator's Guide" (http://www.OpenLDAP.org/doc/admin/)
1562 .SH ACKNOWLEDGEMENTS
1564 is developed and maintained by The OpenLDAP Project (http://www.openldap.org/).
1566 is derived from University of Michigan LDAP 3.3 Release.