1 .TH SLAPD.CONF 5 "RELEASEDATE" "OpenLDAP LDVERSION"
2 .\" Copyright 1998-2003 The OpenLDAP Foundation All Rights Reserved.
3 .\" Copying restrictions apply. See COPYRIGHT/LICENSE.
6 slapd.conf \- configuration file for slapd, the stand-alone LDAP daemon
12 contains configuration information for the
14 daemon. This configuration file is also used by the
16 replication daemon and by the SLAPD tools
24 file consists of a series of global configuration options that apply to
26 as a whole (including all backends), followed by zero or more database
27 backend definitions that contain information specific to a backend
35 # comment - these options apply to every database
36 <global configuration options>
37 # first database definition & configuration options
38 database <backend 1 type>
39 <configuration options specific to backend 1>
40 # subsequent database definitions & configuration options
44 As many backend-specific sections as desired may be included. Global
45 options can be overridden in a backend (for options that appear more
46 than once, the last appearance in the
48 file is used). Blank lines and comment lines beginning with a `#'
49 character are ignored. If a line begins with white space, it is
50 considered a continuation of the previous line.
52 Arguments on configuration lines are separated by white space. If an
53 argument contains white space, the argument should be enclosed in
54 double quotes. If an argument contains a double quote (`"') or a
55 backslash character (`\\'), the character should be preceded by a
58 The specific configuration options available are discussed below in the
59 Global Configuration Options, General Backend Options, and General Database
60 Options. Backend-specific options are discussed in the
62 manual pages. Refer to the "OpenLDAP Administrator's Guide" for more
63 details on the slapd configuration file.
64 .SH GLOBAL CONFIGURATION OPTIONS
65 Options described in this section apply to all backends, unless specifically
66 overridden in a backend definition. Arguments that should be replaced by
67 actual text are shown in brackets <>.
69 .B access to <what> "[ by <who> <access> <control> ]+"
70 Grant access (specified by <access>) to a set of entries and/or
71 attributes (specified by <what>) by one or more requestors (specified
75 and the "OpenLDAP's Administrator's Guide" for details.
78 Specify a set of features (separated by white space) to
81 allows acceptance of LDAPv2 bind requests. Note that
83 does not truely implement LDAPv2 (RFC 1777), now Historic (RFC 3494).
85 allows anonymous bind when credentials are not empty (e.g.
88 allows unauthenticated (anonymous) bind when DN is not empty.
90 allow unauthenticated (anonymous) update operations to be processed
91 (subject to access controls and other administrative limits).
93 .B argsfile <filename>
94 The ( absolute ) name of a file that will hold the
96 server's command line options
97 if started without the debugging command line option.
99 .B attributeoptions [option-name]...
100 Define tagging attribute options or option tag/range prefixes.
101 Options must not end with `-', prefixes must end with `-'.
102 The `lang-' prefix is predefined.
105 directive, `lang-' will no longer be defined and you must specify it
106 explicitly if you want it defined.
108 An attribute description with a tagging option is a subtype of that
109 attribute description without the option.
110 Except for that, options defined this way have no special semantics.
111 Prefixes defined this way work like the `lang-' options:
112 They define a prefix for tagging options starting with the prefix.
113 That is, if you define the prefix `x-foo-', you can use the option
115 Furthermore, in a search or compare, a prefix or range name (with
116 a trailing `-') matches all options starting with that name, as well
117 as the option with the range name sans the trailing `-'.
118 That is, `x-foo-bar-' matches `x-foo-bar' and `x-foo-bar-baz'.
120 RFC2251 reserves options beginning with `x-' for private experiments.
121 Other options should be registered with IANA, see RFC3383 section 3.4.
122 OpenLDAP also has the `binary' option built in, but this is a transfer
123 option, not a tagging option.
126 .B attributetype "(\ <oid> [NAME\ <name>] [OBSOLETE]\
127 [DESC\ <description>]\
128 [SUP\ <oid>] [EQUALITY\ <oid>] [ORDERING\ <oid>]\
129 [SUBSTR\ <oid>] [SYNTAX\ <oidlen>] [SINGLE\-VALUE] [COLLECTIVE]\
130 [NO\-USER\-MODIFICATION] [USAGE\ <attributeUsage>]\ )"
132 Specify an attribute type using the LDAPv3 syntax defined in RFC 2252.
133 The slapd parser extends the RFC 2252 definition by allowing string
134 forms as well as numeric OIDs to be used for the attribute OID and
135 attribute syntax OID.
141 .B concurrency <integer>
142 Specify a desired level of concurrency. Provided to the underlying
143 thread system as a hint. The default is not to provide any hint.
145 .B conn_max_pending <integer>
146 Specify the maximum number of pending requests for an anonymous session.
147 If requests are submitted faster than the server can process them, they
148 will be queued up to this limit. If the limit is exceeded, the session
149 is closed. The default is 100.
151 .B conn_max_pending_auth <integer>
152 Specify the maximum number of pending requests for an authenticated session.
155 .\".B debug <subsys> <level>
156 .\"Specify a logging level for a particular subsystem. The subsystems include
158 .\"a global level for all subsystems,
162 .\"the backend databases,
164 .\"the entry cache manager,
166 .\"the config file reader,
168 .\"the connection manager,
170 .\"the Cyrus SASL library interface,
172 .\"the search filter processor,
174 .\"the DN normalization library,
176 .\"the database indexer,
178 .\"the ASN.1 BER library,
180 .\"the dynamic module loader,
182 .\"the LDAP operation processors,
184 .\"the SASL authentication subsystem,
186 .\"the schema processor, and
188 .\"the TLS library interface. This is not an exhaustive list; there are many
189 .\"other subsystems and more are added over time.
191 .\"The levels are, in order of decreasing priority:
192 .\".B emergency, alert, critical, error, warning, notice, information, entry,
193 .\".B args, results, detail1, detail2
194 .\"An integer may be used instead, with 0 corresponding to
200 .\"level logs function entry points,
202 .\"adds function call parameters, and
204 .\"adds the function results to the logs.
209 .\"levels add even more low level detail from individual functions.
211 .B defaultsearchbase <dn>
212 Specify a default search base to use when client submits a
213 non-base search request with an empty base DN.
215 .B disallow <features>
216 Specify a set of features (separated by white space) to
217 disallow (default none).
219 disables acceptance of anonymous bind requests.
221 disables simple (bind) authentication.
223 disables Kerberos V4 (bind) authentication.
225 disables Start TLS from forcing session to anonymous status (see also
228 disables StartTLS if authenticated (see also
231 .B gentlehup { on | off }
232 A SIGHUP signal will only cause a 'gentle' shutdown-attempt:
234 will stop listening for new connections, but will not close the
235 connections to the current clients. Future write operations return
236 unwilling-to-perform, though. Slapd terminates when all clients
237 have closed their connections (if they ever do), or \- as before \-
238 if it receives a SIGTERM signal. This can be useful if you wish to
239 terminate the server and start a new
242 .B with another database,
243 without disrupting the currently active clients.
244 The default is off. You may wish to use
246 along with this option.
248 .B idletimeout <integer>
249 Specify the number of seconds to wait before forcibly closing
250 an idle client connection. A idletimeout of 0 disables this
251 feature. The default is 0.
253 .B include <filename>
254 Read additional configuration information from the given file before
255 continuing with the next line of the current file.
257 .B limits <who> <limit> [<limit> [...]]
258 Specify time and size limits based on who initiated an operation.
265 anonymous | users | [dn[.<style>]=]<pattern>
271 <style> ::= exact | base | one | subtree | children | regex | anonymous
276 matches all unauthenticated clients.
279 matches all authenticated clients;
282 dn pattern is assumed unless otherwise specified by qualifying
283 the (optional) key string
289 (which are synonims), to require an exact match; with
291 to require exactly one level of depth match; with
293 to allow any level of depth match, including the exact match; with
295 to allow any level of depth match, not including the exact match;
297 explicitly requires the (default) match based on regular expression
298 pattern, as detailed in
302 matches unbound operations; the
305 The same behavior is obtained by using the
311 The currently supported limits are
316 The syntax for time limits is
317 .BR time[.{soft|hard}]=<integer> ,
320 is the number of seconds slapd will spend answering a search request.
321 If no time limit is explicitly requested by the client, the
323 limit is used; if the requested time limit exceedes the
325 limit, an "Administrative limit exceeded" is returned.
328 limit is set to 0 or to the keyword "soft", the soft limit is used
329 in either case; if it is set to -1 or to the keyword "none",
330 no hard limit is enforced.
331 Explicit requests for time limits smaller or equal to the
334 If no flag is set, the value is assigned to the
338 limit is set to zero, to preserve the original behavior.
340 The syntax for size limits is
341 .BR size[.{soft|hard|unchecked}]=<integer> ,
344 is the maximum number of entries slapd will return answering a search
346 If no size limit is explicitly requested by the client, the
348 limit is used; if the requested size limit exceedes the
350 limit, an "Administrative limit exceeded" is returned.
353 limit is set to 0 or to the keyword "soft", the soft limit is used
354 in either case; if it is set to -1 or to the keyword "none",
355 no hard limit is enforced.
356 Explicit requests for size limits smaller or equal to the
361 flag sets a limit on the number of candidates a search request is allowed
363 If the selected candidates exceed the
365 limit, the search will abort with "Unwilling to perform".
366 If it is set to -1 or to the keyword "none", no limit is applied (the default).
367 If no flag is set, the value is assigned to the
371 limit is set to zero, to preserve the original behavior.
373 In case of no match, the global limits are used.
374 The default values are the same of
383 control is defined, additional size limits may be enforced; the syntax is
384 .BR size.pr={<integer>|noEstimate} ,
387 is the max page size if no explicit limit is set; the keyword
389 inhibits the server to return an estimate of the total number
390 of entries that will be returned.
393 .\".B logfile <filename>
394 .\"Specify a file for recording debug log messages. By default these messages
395 .\"only go to stderr and are not recorded anywhere else. Specifying a logfile
396 .\"copies messages to both stderr and the logfile.
398 .B loglevel <integer>
399 Specify the level at which debugging statements and operation
400 statistics should be syslogged (currently logged to the
402 LOG_LOCAL4 facility). Log levels are additive, and available levels
412 debug packet handling
415 heavy trace debugging
418 connection management
421 print out packets sent and received
424 search filter processing
427 configuration file processing
430 access control list processing
433 stats log connections/operations/results
436 stats log entries sent
439 print communication with shell backends
447 .B moduleload <filename>
448 Specify the name of a dynamically loadable module to load. The filename
449 may be an absolute path name or a simple filename. Non-absolute names
450 are searched for in the directories specified by the
452 option. This option and the
454 option are only usable if slapd was compiled with --enable-modules.
456 .B modulepath <pathspec>
457 Specify a list of directories to search for loadable modules. Typically
458 the path is colon-separated but this depends on the operating system.
460 .B objectclass "( <oid> [NAME <name>] [DESC <description] [OBSOLETE]\
461 [SUP <oids>] [{ ABSTRACT | STRUCTURAL | AUXILIARY }] [MUST <oids>]\
464 Specify an objectclass using the LDAPv3 syntax defined in RFC 2252.
465 The slapd parser extends the RFC 2252 definition by allowing string
466 forms as well as numeric OIDs to be used for the object class OID.
470 description.) Object classes are "STRUCTURAL" by default.
473 .B objectidentifier <name> "{ <oid> | <name>[:<suffix>] }"
474 Define a string name that equates to the given OID. The string can be used
475 in place of the numeric OID in objectclass and attribute definitions. The
476 name can also be used with a suffix of the form ":xx" in which case the
477 value "oid.xx" will be used.
479 .B password-hash <hash>
480 This option sets the hash to be used in generation of user
481 passwords, stored in userPassword, during processing of
482 LDAP Password Modify Extended Operations (RFC 3052).
483 The <hash> must be one of
497 use the SHA-1 algorithm (FIPS 160-1), the latter with a seed.
502 use the MD5 algorithm (RFC 1321), the latter with a seed.
509 indicates that the new password should be
510 added to userPassword as clear text.
512 Note that this option does not alter the normal user applications
513 handling of userPassword during LDAP Add, Modify, or other LDAP operations.
515 .B password\-crypt\-salt\-format <format>
516 Specify the format of the salt passed to
518 when generating {CRYPT} passwords (see
520 during processing of LDAP Password Modify Extended Operations (RFC 3062).
522 This string needs to be in
524 format and may include one (and only one) %s conversion.
525 This conversion will be substituted with a string random
526 characters from [A\-Za\-z0\-9./]. For example, "%.2s"
527 provides a two character salt and "$1$%.8s" tells some
528 versions of crypt(3) to use an MD5 algorithm and provides
529 8 random characters of salt. The default is "%s", which
530 provides 31 characters of salt.
532 .B pidfile <filename>
533 The ( absolute ) name of a file that will hold the
535 server's process ID ( see
537 ) if started without the debugging command line option.
540 Specify the referral to pass back when
542 cannot find a local database to handle a request.
543 If specified multiple times, each url is provided.
546 The ( absolute ) name of a file that will hold the
548 server's command line options
549 if started without the debugging command line option.
552 The ( absolute ) name of a file that will hold the
554 server's process ID ( see
556 ) if started without the debugging command line option.
558 .B require <conditions>
559 Specify a set of conditions (separated by white space) to
560 require (default none).
561 The directive may be specified globally and/or per-database.
563 requires bind operation prior to directory operations.
565 requires session to be using LDAP version 3.
567 requires authentication prior to directory operations.
569 requires SASL authentication prior to directory operations.
571 requires strong authentication prior to directory operations.
572 The strong keyword allows protected "simple" authentication
573 as well as SASL authentication.
575 may be used to require no conditions (useful for clearly globally
576 set conditions within a particular database).
578 .B reverse-lookup on | off
579 Enable/disable client name unverified reverse lookup (default is
581 if compiled with --enable-rlookups).
584 Specify the name of an LDIF(5) file containing user defined attributes
585 for the root DSE. These attributes are returned in addition to the
586 attributes normally produced by slapd.
588 .B sasl-authz-policy <policy>
589 Used to specify which rules to use for SASL Proxy Authorization. Proxy
590 authorization allows a client to authenticate to the server using one
591 user's credentials, but specify a different identity to use for authorization
592 and access control purposes. It essentially allows user A to login as user
593 B, using user A's password.
596 flag disables proxy authorization. This is the default setting.
599 flag will use rules in the
601 attribute of the authorization DN.
604 flag will use rules in the
606 attribute of the authentication DN.
609 flag will allow both of the above. The rules are simply regular expressions
610 specifying which DNs are allowed to perform proxy authorization. The
612 attribute in an entry specifies which other users
613 are allowed to proxy login to this entry. The
616 an entry specifies which other users this user can authorize as. Use of
619 abused if users are allowed to write arbitrary values to this attribute.
622 attribute must be protected with ACLs such that
623 only privileged users can modify it.
626 Used to specify the fully qualified domain name used for SASL processing.
628 .B sasl-realm <realm>
629 Specify SASL realm. Default is empty.
631 .B sasl-regexp <match> <replace>
632 Used by the SASL authorization mechanism to convert a SASL authenticated
633 username to an LDAP DN. When an authorization request is received, the SASL
637 are taken, when available, and combined into a SASL name of the
642 .B uid=<username>[,cn=<realm>],cn=<mechanism>,cn=auth
645 This SASL name is then compared against the
647 regular expression, and if the match is successful, the SASL name is
650 string. If there are wildcard strings in the
652 regular expression that are enclosed in parenthesis, e.g.
660 then the portion of the SASL name that matched the wildcard will be stored
661 in the numbered placeholder variable $1. If there are other wildcard strings
662 in parenthesis, the matching strings will be in $2, $3, etc. up to $9. The
663 placeholders can then be used in the
669 .B cn=$1,ou=Accounts,dc=$2,dc=$4.
673 The replaced SASL name can be either a DN or an LDAP URI. If the latter, the slapd
674 server will use the URI to search its own database, and if the search returns
675 exactly one entry, the SASL name is replaced by the DN of that entry.
678 options can be given in the configuration file to allow for multiple matching
679 and replacement patterns. The matching patterns are checked in the order they
680 appear in the file, stopping at the first successful match.
683 .\"Because the plus sign + is a character recognized by the regular expression engine,
684 .\"and it will appear in SASL names that include a REALM, be careful to escape the
685 .\"plus sign with a backslash \\+ to remove the character's special meaning.
688 .B sasl-secprops <properties>
689 Used to specify Cyrus SASL security properties.
692 flag (without any other properities) causes the flag properites
693 default, "noanonymous,noplain", to be cleared.
696 flag disables mechanisms susceptible to simple passive attacks.
699 flag disables mechanisms susceptible to active attacks.
702 flag disables mechanisms susceptible to passive dictionary attacks.
705 flag disables mechanisms which support anonymous login.
708 flag require forward secrecy between sessions.
711 require mechanisms which pass client credentials (and allow
712 mechanisms which can pass credentials to do so).
715 property specifies the minimum acceptable
716 .I security strength factor
717 as an integer approximate to effective key length used for
718 encryption. 0 (zero) implies no protection, 1 implies integrity
719 protection only, 56 allows DES or other weak ciphers, 112
720 allows triple DES and other strong ciphers, 128 allows RC4,
721 Blowfish and other modern strong ciphers. The default is 0.
724 property specifies the maximum acceptable
725 .I security strength factor
726 as an integer (see minssf description). The default is INT_MAX.
729 property specifies the maximum security layer receive buffer
730 size allowed. 0 disables security layers. The default is 65536.
733 Specify the distinguished name for the subschema subentry that
734 controls the entries on this server. The default is "cn=Subschema".
736 .B security <factors>
737 Specify a set of factors (separated by white space) to require.
738 An integer value is associated with each factor and is roughly
739 equivalent of the encryption key length to require. A value
740 of 112 is equivalent to 3DES, 128 to Blowfish, etc..
741 The directive may be specified globally and/or per-database.
743 specifies the overall security strength factor.
745 specifies the transport security strength factor.
747 specifies the TLS security strength factor.
749 specifies the SASL security strength factor.
751 specifies the overall security strength factor to require for
753 .B update_transport=<n>
754 specifies the transport security strength factor to require for
757 specifies the TLS security strength factor to require for
760 specifies the SASL security strength factor to require for
763 specifies the security strength factor required for
765 username/password authentication.
768 factor is measure of security provided by the underlying transport,
769 e.g. ldapi:// (and eventually IPSEC). It is not normally used.
771 .B sizelimit {<integer>|unlimited}
773 .B sizelimit size[.{soft|hard|unchecked}]=<integer> [...]
774 Specify the maximum number of entries to return from a search operation.
775 The default size limit is 500.
780 to specify no limits.
781 The second format allows a fine grain setting of the size limits.
782 Extra args can be added on the same line.
785 for an explanation of the different flags.
787 .B sockbuf_max_incoming <integer>
788 Specify the maximum incoming LDAP PDU size for anonymous sessions.
789 The default is 262143.
791 .B sockbuf_max_incoming_auth <integer>
792 Specify the maximum incoming LDAP PDU size for authenticated sessions.
793 The default is 4194303.
796 Specify the srvtab file in which the kerberos keys necessary for
797 authenticating clients using kerberos can be found. This option is only
798 meaningful if you are using Kerberos authentication.
801 Specify the maximum size of the primary thread pool.
804 .B timelimit {<integer>|unlimited}
806 .B timelimit time[.{soft|hard}]=<integer> [...]
807 Specify the maximum number of seconds (in real time)
809 will spend answering a search request. The default time limit is 3600.
814 to specify no limits.
815 The second format allows a fine grain setting of the time limits.
816 Extra args can be added on the same line.
819 for an explanation of the different flags.
821 .B ucdata-path <path>
822 Specify the path to the directory containing the Unicode character
823 tables. The default path is LOCALSTATEDIR/ucdata.
827 is built with support for Transport Layer Security, there are more options
830 .B TLSCipherSuite <cipher-suite-spec>
831 Permits configuring what ciphers will be accepted and the preference order.
832 <cipher-suite-spec> should be a cipher specification for OpenSSL. Example:
834 TLSCipherSuite HIGH:MEDIUM:+SSLv2
836 To check what ciphers a given spec selects, use:
838 openssl ciphers -v <cipher-suite-spec>
840 .B TLSCACertificateFile <filename>
841 Specifies the file that contains certificates for all of the Certificate
846 .B TLSCACertificatePath <path>
847 Specifies the path of a directory that contains Certificate Authority
848 certificates in separate individual files. Usually only one of this
849 or the TLSCACertificateFile is used.
851 .B TLSCertificateFile <filename>
852 Specifies the file that contains the
856 .B TLSCertificateKeyFile <filename>
857 Specifies the file that contains the
859 server private key that matches the certificate stored in the
860 .B TLSCertificateFile
861 file. Currently, the private key must not be protected with a password, so
862 it is of critical importance that it is protected carefully.
864 .B TLSRandFile <filename>
865 Specifies the file to obtain random bits from when /dev/[u]random
866 is not available. Generally set to the name of the EGD/PRNGD socket.
867 The environment variable RANDFILE can also be used to specify the filename.
869 .B TLSVerifyClient <level>
870 Specifies what checks to perform on client certificates in an
871 incoming TLS session, if any.
874 can be specified as one of the following keywords:
880 will not ask the client for a certificate.
883 The client certificate is requested. If no certificate is provided,
884 the session proceeds normally. If a bad certificate is provided,
885 it will be ignored and the session proceeds normally.
888 The client certificate is requested. If no certificate is provided,
889 the session proceeds normally. If a bad certificate is provided,
890 the session is immediately terminated.
892 .B demand | hard | true
893 These keywords are all equivalent, for compatibility reasons.
894 The client certificate is requested. If no certificate is provided,
895 or a bad certificate is provided, the session is immediately terminated.
897 Note that a valid client certificate is required in order to use the
898 SASL EXTERNAL authentication mechanism with a TLS session. As such,
901 setting must be chosen to enable SASL EXTERNAL authentication.
903 .SH GENERAL BACKEND OPTIONS
904 Options in this section only apply to the configuration file section
905 for the specified backend. They are supported by every
908 .B backend <databasetype>
909 Mark the beginning of a backend definition. <databasetype>
924 depending on which backend will serve the database.
926 .SH GENERAL DATABASE OPTIONS
927 Options in this section only apply to the configuration file section
928 for the database in which they are defined. They are supported by every
929 type of backend. Note that the
933 option are mandatory for each database.
935 .B database <databasetype>
936 Mark the beginning of a new database instance definition. <databasetype>
951 depending on which backend will serve the database.
956 will automatically maintain the
957 modifiersName, modifyTimestamp, creatorsName, and
958 createTimestamp attributes for entries. By default, lastmod is on.
960 .B maxderefdepth <depth>
961 Specifies the maximum number of aliases to dereference when trying to
962 resolve an entry, used to avoid inifinite alias loops. The default is 1.
965 This option puts the database into "read-only" mode. Any attempts to
966 modify the database will return an "unwilling to perform" error. By
967 default, readonly is off.
969 .B replica host=<hostname>[:port] [tls=yes|critical]
970 .B [suffix=<suffix> [...]]
971 .B bindmethod=simple|sasl [binddn=<simple DN>] [credentials=<simple password>]
972 .B [saslmech=<SASL mech>] [secprops=<properties>] [realm=<realm>]
973 .B [authcId=<authentication ID>] [authzId=<authorization ID>]
974 .B [attr[!]=<attr list>]
976 Specify a replication site for this database. Refer to the "OpenLDAP
977 Administrator's Guide" for detailed information on setting up a replicated
979 directory service. Zero or more
981 instances can be used to select the subtrees that will be replicated
982 (defaults to all the database). A
990 and should only be used when adequate security services
991 (e.g TLS or IPSEC) are in place. A
997 Specific security properties (as with the
999 keyword above) for a SASL bind can be set with the
1001 option. A non-default SASL realm can be set with the
1006 will use Kerberos, a kerberos instance should be given in
1010 can be given after the
1012 keyword to allow the selective replication of the listed attributes only;
1015 mark is used, the list is considered exclusive, i.e. the listed attributes
1017 If an objectClass is listed, all the related attributes
1018 are (are not) replicated.
1021 .B replogfile <filename>
1022 Specify the name of the replication log file to log changes to.
1023 The replication log is typically written by
1028 .BR slapd.replog (5)
1029 for more information. The specified file should be located
1030 in a directory with limited read/write/execute access as the replication
1031 logs may contain sensitive information.
1034 Specify the distinguished name that is not subject to access control
1035 or administrative limit restrictions for operations on this database.
1036 This DN may or may not be associated with an entry. An empty root
1037 DN (the default) specifies no root access is to be granted. It is
1038 recommended that the rootdn only be specified when needed (such as
1039 when initially populating a database). If the rootdn is within
1040 a namingContext (suffix) of the database, a simple bind password
1041 may also be provided using the
1045 .B rootpw <password>
1046 Specify a password (or hash of the password) for the rootdn. The
1047 password can only be set if the rootdn is within the namingContext
1048 (suffix) of the database.
1049 This option accepts all RFC 2307 userPassword formats known to
1052 desription) as well as cleartext.
1054 may be used to generate a hash of a password. Cleartext
1055 and \fB{CRYPT}\fP passwords are not recommended. If empty
1056 (the default), authentication of the root DN is by other means
1057 (e.g. SASL). Use of SASL is encouraged.
1059 .B suffix <dn suffix>
1060 Specify the DN suffix of queries that will be passed to this
1061 backend database. Multiple suffix lines can be given and at least one is
1062 required for each database definition.
1063 If the suffix of one database is "inside" that of another, the database
1064 with the inner suffix must come first in the configuration file.
1067 Specify that the current backend database is a subordinate of another
1068 backend database. A subordinate database may have only one suffix. This
1069 option may be used to glue multiple databases into a single namingContext.
1070 If the suffix of the current database is within the namingContext of a
1071 superior database, searches against the superior database will be
1072 propagated to the subordinate as well. All of the databases
1073 associated with a single namingContext should have identical rootdns.
1074 Behavior of other LDAP operations is unaffected by this setting. In
1075 particular, it is not possible to use moddn to move an entry from
1076 one subordinate to another subordinate within the namingContext.
1079 This option is only applicable in a slave
1081 It specifies the DN permitted to update (subject to access controls)
1082 the replica (typically, this is the DN
1084 binds to update the replica).
1087 Specify the referral to pass back when
1089 is asked to modify a replicated local database.
1090 If specified multiple times, each url is provided.
1091 .SH DATABASE-SPECIFIC OPTIONS
1092 Each database may allow specific configuration options; they are
1093 documented separately in the
1094 .BR slapd-<backend> (5)
1098 Here is a short example of a configuration file:
1102 include SYSCONFDIR/schema/core.schema
1103 pidfile LOCALSTATEDIR/slapd.pid
1105 # Subtypes of "name" (e.g. "cn" and "ou") with the
1106 # option ";x-hidden" can be searched for/compared,
1107 # but are not shown. See \fBslapd.access\fP(5).
1108 attributeoptions x-hidden lang-
1109 access to attr=name;x-hidden by * =cs
1112 suffix "dc=our-domain,dc=com"
1113 # The database directory MUST exist prior to
1114 # running slapd AND should only be accessible
1115 # by the slapd/tools. Mode 700 recommended.
1116 directory LOCALSTATEDIR/openldap-data
1117 # Indices to maintain
1118 index objectClass eq
1119 index cn,sn,mail pres,eq,approx,sub
1121 # We serve small clients that do not handle referrals,
1122 # so handle remote lookups on their behalf.
1125 uri ldap://ldap.some-server.com/
1130 "OpenLDAP Administrator's Guide" contains a longer annotated
1131 example of a configuration file.
1132 The original ETCDIR/slapd.conf is another example.
1136 default slapd configuration file
1140 .BR slapd-dnssrv (5),
1145 .BR slapd-passwd (5),
1147 .BR slapd-shell (5),
1150 .BR slapd.replog (5),
1151 .BR slapd.access (5),
1160 "OpenLDAP Administrator's Guide" (http://www.OpenLDAP.org/doc/admin/)
1161 .SH ACKNOWLEDGEMENTS
1163 is developed and maintained by The OpenLDAP Project (http://www.openldap.org/).
1165 is derived from University of Michigan LDAP 3.3 Release.