1 menu "MMC Host controller Support"
4 bool "MMC/SD/SDIO card support"
5 default ARM || PPC || SANDBOX
7 This selects MultiMediaCard, Secure Digital and Secure
10 If you want MMC/SD/SDIO support, you should say Y here and
11 also to your specific host controller driver.
14 bool "Generic MMC driver framework"
18 bool "Enable MMC controllers using Driver Model"
21 This enables the MultiMediaCard (MMC) uclass which supports MMC and
22 Secure Digital I/O (SDIO) cards. Both removable (SD, micro-SD, etc.)
23 and non-removable (e.g. eMMC chip) devices are supported. These
24 appear as block devices in U-Boot and can support filesystems such
28 bool "Support MMC controller operations using Driver Model"
32 Driver model provides a means of supporting device operations. This
33 option moves MMC operations under the control of driver model. The
34 option will be removed as soon as all DM_MMC drivers use it, as it
35 will the only supported behaviour.
40 bool "Tiny MMC framework in SPL"
42 Enable MMC framework tinification support. This option is useful if
43 if your SPL is extremely size constrained. Heed the warning, enable
44 this option if and only if you know exactly what you are doing, if
45 you are reading this help text, you most likely have no idea :-)
47 The MMC framework is reduced to bare minimum to be useful. No malloc
48 support is needed for the MMC framework operation with this option
49 enabled. The framework supports exactly one MMC device and exactly
50 one MMC driver. The MMC driver can be adjusted to avoid any malloc
51 operations too, which can remove the need for malloc support in SPL
52 and thus further reduce footprint.
55 bool "Atmel SDHCI controller support"
56 depends on DM_MMC && BLK && DM_MMC_OPS && ARCH_AT91
59 This enables support for the Atmel SDHCI controller, which supports
60 the embedded MultiMedia Card (e.MMC) Specification V4.51, the SD
61 Memory Card Specification V3.0, and the SDIO V3.0 specification.
62 It is compliant with the SD Host Controller Standard V3.0
66 bool "TI DAVINCI Multimedia Card Interface support"
67 depends on ARCH_DAVINCI
70 This selects the TI DAVINCI Multimedia card Interface.
71 If you have an DAVINCI board with a Multimedia Card slot,
72 say Y here. If unsure, say N.
75 bool "Synopsys DesignWare Memory Card Interface"
77 This selects support for the Synopsys DesignWare Mobile Storage IP
78 block, this provides host support for SD and MMC interfaces, in both
79 PIO, internal DMA mode and external DMA mode.
82 bool "Exynos specific extensions for Synopsys DW Memory Card Interface"
83 depends on ARCH_EXYNOS
87 This selects support for Samsung Exynos SoC specific extensions to the
88 Synopsys DesignWare Memory Card Interface driver. Select this option
89 for platforms based on Exynos4 and Exynos5 SoC's.
92 bool "K3 specific extensions for Synopsys DW Memory Card Interface"
95 This selects support for Hisilicon K3 SoC specific extensions to the
96 Synopsys DesignWare Memory Card Interface driver. Select this option
97 for platforms based on Hisilicon K3 SoC's.
99 config MMC_DW_ROCKCHIP
100 bool "Rockchip SD/MMC controller support"
101 depends on DM_MMC && OF_CONTROL
104 This enables support for the Rockchip SD/MMM controller, which is
105 based on Designware IP. The device is compatible with at least
106 SD 3.0, SDIO 3.0 and MMC 4.5 and supports common eMMC chips as well
107 as removeable SD and micro-SD cards.
109 config MMC_DW_SOCFPGA
110 bool "SOCFPGA specific extensions for Synopsys DW Memory Card Interface"
111 depends on ARCH_SOCFPGA
115 This selects support for Altera SOCFPGA specific extensions to the
116 Synopsys DesignWare Memory Card Interface driver. Select this option
117 for platforms based on Altera SOCFPGA.
120 bool "Freescale i.MX21/27/31 or MPC512x Multimedia Card support"
122 This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x
123 Multimedia Card Interface. If you have an i.MX or MPC512x platform
124 with a Multimedia Card slot, say Y here.
129 bool "Freescale MXS Multimedia Card Interface support"
131 This selects the Freescale SSP MMC controller found on MXS based
132 platforms like mx23/28.
137 bool "TI OMAP High Speed Multimedia Card Interface support"
139 This selects the TI OMAP High Speed Multimedia card Interface.
140 If you have an omap2plus board with a Multimedia Card slot,
146 bool "SuperH/Renesas ARM SoCs on-chip SDHI host controller support"
149 Support for the on-chip SDHI host controller on SuperH/Renesas ARM SoCs platform
152 bool "UniPhier SD/MMC Host Controller support"
153 depends on ARCH_UNIPHIER
154 depends on BLK && DM_MMC_OPS
155 depends on OF_CONTROL
157 This selects support for the SD/MMC Host Controller on UniPhier SoCs.
160 bool "Sandbox MMC support"
162 depends on BLK && DM_MMC_OPS && OF_CONTROL
164 This select a dummy sandbox MMC driver. At present this does nothing
165 other than allow sandbox to be build with MMC support. This
166 improves build coverage for sandbox and makes it easier to detect
167 MMC build errors with sandbox.
170 bool "Secure Digital Host Controller Interface support"
172 This selects the generic Secure Digital Host Controller Interface.
173 It is used by manufacturers such as Texas Instruments(R), Ricoh(R)
174 and Toshiba(R). Most controllers found in laptops are of this type.
176 If you have a controller with this interface, say Y here.
180 config MMC_SDHCI_IO_ACCESSORS
184 This is silent Kconfig symbol that is selected by the drivers that
185 need to overwrite SDHCI IO memory accessors.
187 config MMC_SDHCI_SDMA
188 bool "Support SDHCI SDMA"
191 This enables support for the SDMA (Single Operation DMA) defined
192 in the SD Host Controller Standard Specification Version 1.00 .
194 config MMC_SDHCI_BCM2835
195 tristate "SDHCI support for the BCM2835 SD/MMC Controller"
196 depends on ARCH_BCM283X
198 select MMC_SDHCI_IO_ACCESSORS
200 This selects the BCM2835 SD/MMC controller.
202 If you have a BCM2835 platform with SD or MMC devices,
207 config MMC_SDHCI_CADENCE
208 bool "SDHCI support for the Cadence SD/SDIO/eMMC controller"
209 depends on BLK && DM_MMC_OPS
211 depends on OF_CONTROL
213 This selects the Cadence SD/SDIO/eMMC driver.
215 If you have a controller with this interface, say Y here.
219 config MMC_SDHCI_KONA
220 bool "SDHCI support on Broadcom KONA platform"
223 This selects the Broadcom Kona Secure Digital Host Controller
224 Interface(SDHCI) support.
225 This is used in Broadcom mobile SoCs.
227 If you have a controller with this interface, say Y here.
230 bool "Qualcomm SDHCI controller"
231 depends on BLK && DM_MMC_OPS
234 Enables support for SDHCI 2.0 controller present on some Qualcomm
235 Snapdragon devices. This device is compatible with eMMC v4.5 and
236 SD 3.0 specifications. Both SD and eMMC devices are supported.
237 Card-detect gpios are not supported.
240 bool "SDHCI support on Marvell platform"
241 depends on ARCH_MVEBU
244 This selects the Secure Digital Host Controller Interface on
247 If you have a controller with this interface, say Y here.
251 config MMC_SDHCI_PIC32
252 bool "Microchip PIC32 on-chip SDHCI support"
253 depends on DM_MMC && MACH_PIC32
256 Support for Microchip PIC32 SDHCI controller.
258 config MMC_SDHCI_ROCKCHIP
259 bool "Arasan SDHCI controller for Rockchip support"
260 depends on ARCH_ROCKCHIP
261 depends on DM_MMC && BLK && DM_MMC_OPS
264 Support for Arasan SDHCI host controller on Rockchip ARM SoCs platform
267 bool "SDHCI support on Samsung S5P SoC"
270 This selects the Secure Digital Host Controller Interface (SDHCI)
273 If you have a controller with this interface, say Y here.
277 config MMC_SDHCI_SPEAR
278 bool "SDHCI support on ST SPEAr platform"
281 This selects the Secure Digital Host Controller Interface (SDHCI)
282 often referrered to as the HSMMC block in some of the ST SPEAR range
285 If you have a controller with this interface, say Y here.
289 config MMC_SDHCI_XENON
290 bool "SDHCI support for the Xenon SDHCI controller"
291 depends on MMC_SDHCI && DM_MMC && OF_CONTROL
293 Support for Xenon SDHCI host controller on Marvell Armada 3700
294 7k/8k ARM SoCs platforms
296 If you have a controller with this interface, say Y here.
300 config MMC_SDHCI_TEGRA
301 bool "SDHCI platform support for the Tegra SD/MMC Controller"
305 This selects the Tegra SD/MMC controller. If you have a Tegra
306 platform with SD or MMC devices, say Y here.
310 config MMC_SDHCI_ZYNQ
311 bool "Arasan SDHCI controller support"
312 depends on ARCH_ZYNQ || ARCH_ZYNQMP
313 depends on DM_MMC && OF_CONTROL && BLK && DM_MMC_OPS
316 Support for Arasan SDHCI host controller on Zynq/ZynqMP ARM SoCs platform
319 bool "Allwinner sunxi SD/MMC Host Controller support"
320 depends on ARCH_SUNXI && !UART0_PORT_F
323 This selects support for the SD/MMC Host Controller on
324 Allwinner sunxi SoCs.
330 config SYS_FSL_ERRATUM_ESDHC111
333 config SYS_FSL_ERRATUM_ESDHC13
336 config SYS_FSL_ERRATUM_ESDHC135
339 config SYS_FSL_ERRATUM_ESDHC_A001