1 // SPDX-License-Identifier: GPL-2.0+
3 * (C) Copyright 2012 SAMSUNG Electronics
4 * Jaehoon Chung <jh80.chung@samsung.com>
10 #include <linux/libfdt.h>
13 #include <asm/arch/dwmmc.h>
14 #include <asm/arch/clk.h>
15 #include <asm/arch/pinmux.h>
16 #include <asm/arch/power.h>
19 #define DWMMC_MAX_CH_NUM 4
20 #define DWMMC_MAX_FREQ 52000000
21 #define DWMMC_MIN_FREQ 400000
22 #define DWMMC_MMC0_SDR_TIMING_VAL 0x03030001
23 #define DWMMC_MMC2_SDR_TIMING_VAL 0x03020001
27 DECLARE_GLOBAL_DATA_PTR;
29 struct exynos_mmc_plat {
30 struct mmc_config cfg;
35 /* Exynos implmentation specific drver private data */
36 struct dwmci_exynos_priv_data {
38 struct dwmci_host host;
44 * Function used as callback function to initialise the
45 * CLKSEL register for every mmc channel.
47 static void exynos_dwmci_clksel(struct dwmci_host *host)
49 struct dwmci_exynos_priv_data *priv = host->priv;
51 dwmci_writel(host, DWMCI_CLKSEL, priv->sdr_timing);
54 unsigned int exynos_dwmci_get_clk(struct dwmci_host *host, uint freq)
60 * Since SDCLKIN is divided inside controller by the DIVRATIO
61 * value set in the CLKSEL register, we need to use the same output
62 * clock value to calculate the CLKDIV value.
63 * as per user manual:cclk_in = SDCLKIN / (DIVRATIO + 1)
65 clk_div = ((dwmci_readl(host, DWMCI_CLKSEL) >> DWMCI_DIVRATIO_BIT)
66 & DWMCI_DIVRATIO_MASK) + 1;
67 sclk = get_mmc_clk(host->dev_index);
70 * Assume to know divider value.
71 * When clock unit is broken, need to set "host->div"
73 return sclk / clk_div / (host->div + 1);
76 static void exynos_dwmci_board_init(struct dwmci_host *host)
78 struct dwmci_exynos_priv_data *priv = host->priv;
80 if (host->quirks & DWMCI_QUIRK_DISABLE_SMU) {
81 dwmci_writel(host, EMMCP_MPSBEGIN0, 0);
82 dwmci_writel(host, EMMCP_SEND0, 0);
83 dwmci_writel(host, EMMCP_CTRL0,
84 MPSCTRL_SECURE_READ_BIT |
85 MPSCTRL_SECURE_WRITE_BIT |
86 MPSCTRL_NON_SECURE_READ_BIT |
87 MPSCTRL_NON_SECURE_WRITE_BIT | MPSCTRL_VALID);
90 /* Set to timing value at initial time */
92 exynos_dwmci_clksel(host);
95 static int exynos_dwmci_core_init(struct dwmci_host *host)
98 unsigned long freq, sclk;
103 freq = DWMMC_MAX_FREQ;
105 /* request mmc clock vlaue of 52MHz. */
106 sclk = get_mmc_clk(host->dev_index);
107 div = DIV_ROUND_UP(sclk, freq);
108 /* set the clock divisor for mmc */
109 set_mmc_clk(host->dev_index, div);
111 host->name = "EXYNOS DWMMC";
112 #ifdef CONFIG_EXYNOS5420
113 host->quirks = DWMCI_QUIRK_DISABLE_SMU;
115 host->board_init = exynos_dwmci_board_init;
117 host->caps = MMC_MODE_DDR_52MHz;
118 host->clksel = exynos_dwmci_clksel;
119 host->get_mmc_clk = exynos_dwmci_get_clk;
121 #ifndef CONFIG_DM_MMC
122 /* Add the mmc channel to be registered with mmc core */
123 if (add_dwmci(host, DWMMC_MAX_FREQ, DWMMC_MIN_FREQ)) {
124 printf("DWMMC%d registration failed\n", host->dev_index);
132 static struct dwmci_host dwmci_host[DWMMC_MAX_CH_NUM];
134 static int do_dwmci_init(struct dwmci_host *host)
138 flag = host->buswidth == 8 ? PINMUX_FLAG_8BIT_MODE : PINMUX_FLAG_NONE;
139 err = exynos_pinmux_config(host->dev_id, flag);
141 printf("DWMMC%d not configure\n", host->dev_index);
145 return exynos_dwmci_core_init(host);
148 static int exynos_dwmci_get_config(const void *blob, int node,
149 struct dwmci_host *host)
153 struct dwmci_exynos_priv_data *priv;
155 priv = malloc(sizeof(struct dwmci_exynos_priv_data));
157 pr_err("dwmci_exynos_priv_data malloc fail!\n");
161 /* Extract device id for each mmc channel */
162 host->dev_id = pinmux_decode_periph_id(blob, node);
164 host->dev_index = fdtdec_get_int(blob, node, "index", host->dev_id);
165 if (host->dev_index == host->dev_id)
166 host->dev_index = host->dev_id - PERIPH_ID_SDMMC0;
168 if (host->dev_index > 4) {
169 printf("DWMMC%d: Can't get the dev index\n", host->dev_index);
174 /* Get the bus width from the device node (Default is 4bit buswidth) */
175 host->buswidth = fdtdec_get_int(blob, node, "samsung,bus-width", 4);
177 /* Set the base address from the device node */
178 base = fdtdec_get_addr(blob, node, "reg");
180 printf("DWMMC%d: Can't get base address\n", host->dev_index);
184 host->ioaddr = (void *)base;
186 /* Extract the timing info from the node */
187 err = fdtdec_get_int_array(blob, node, "samsung,timing", timing, 3);
189 printf("DWMMC%d: Can't get sdr-timings for devider\n",
195 priv->sdr_timing = (DWMCI_SET_SAMPLE_CLK(timing[0]) |
196 DWMCI_SET_DRV_CLK(timing[1]) |
197 DWMCI_SET_DIV_RATIO(timing[2]));
199 /* sdr_timing didn't assigned anything, use the default value */
200 if (!priv->sdr_timing) {
201 if (host->dev_index == 0)
202 priv->sdr_timing = DWMMC_MMC0_SDR_TIMING_VAL;
203 else if (host->dev_index == 2)
204 priv->sdr_timing = DWMMC_MMC2_SDR_TIMING_VAL;
207 host->fifoth_val = fdtdec_get_int(blob, node, "fifoth_val", 0);
208 host->bus_hz = fdtdec_get_int(blob, node, "bus_hz", 0);
209 host->div = fdtdec_get_int(blob, node, "div", 0);
216 static int exynos_dwmci_process_node(const void *blob,
217 int node_list[], int count)
219 struct dwmci_host *host;
222 for (i = 0; i < count; i++) {
226 host = &dwmci_host[i];
227 err = exynos_dwmci_get_config(blob, node, host);
229 printf("%s: failed to decode dev %d\n", __func__, i);
238 int exynos_dwmmc_init(const void *blob)
240 int node_list[DWMMC_MAX_CH_NUM];
244 count = fdtdec_find_aliases_for_id(blob, "mmc",
245 COMPAT_SAMSUNG_EXYNOS_DWMMC, node_list,
248 /* For DWMMC always set boot device as mmc 0 */
249 if (count >= 3 && get_boot_mode() == BOOT_MODE_SD) {
250 boot_dev_node = node_list[2];
251 node_list[2] = node_list[0];
252 node_list[0] = boot_dev_node;
255 err = exynos_dwmci_process_node(blob, node_list, count);
261 static int exynos_dwmmc_probe(struct udevice *dev)
263 struct exynos_mmc_plat *plat = dev_get_platdata(dev);
264 struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
265 struct dwmci_exynos_priv_data *priv = dev_get_priv(dev);
266 struct dwmci_host *host = &priv->host;
269 err = exynos_dwmci_get_config(gd->fdt_blob, dev_of_offset(dev), host);
272 err = do_dwmci_init(host);
276 dwmci_setup_cfg(&plat->cfg, host, DWMMC_MAX_FREQ, DWMMC_MIN_FREQ);
277 host->mmc = &plat->mmc;
278 host->mmc->priv = &priv->host;
280 upriv->mmc = host->mmc;
282 return dwmci_probe(dev);
285 static int exynos_dwmmc_bind(struct udevice *dev)
287 struct exynos_mmc_plat *plat = dev_get_platdata(dev);
289 return dwmci_bind(dev, &plat->mmc, &plat->cfg);
292 static const struct udevice_id exynos_dwmmc_ids[] = {
293 { .compatible = "samsung,exynos4412-dw-mshc" },
297 U_BOOT_DRIVER(exynos_dwmmc_drv) = {
298 .name = "exynos_dwmmc",
300 .of_match = exynos_dwmmc_ids,
301 .bind = exynos_dwmmc_bind,
302 .ops = &dm_dwmci_ops,
303 .probe = exynos_dwmmc_probe,
304 .priv_auto_alloc_size = sizeof(struct dwmci_exynos_priv_data),
305 .platdata_auto_alloc_size = sizeof(struct exynos_mmc_plat),