3 # Please see https://i3wm.org/docs/userguide.html for a complete reference!
5 # This config file uses keycodes (bindsym) and was written for the QWERTY
8 # To get a config file with the same key positions, but for your current
9 # layout, use the i3-config-wizard
12 # Font for window titles. Will also be used by the bar unless a different font
13 # is used in the bar {} block below.
14 font pango:monospace 8
16 # This font is widely installed, provides lots of unicode glyphs, right-to-left
17 # text rendering and scalability on retina/hidpi displays (thanks to pango).
18 #font pango:DejaVu Sans Mono 8
20 # Before i3 v4.8, we used to recommend this one as the default:
21 # font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
22 # The font above is very space-efficient, that is, it looks good, sharp and
23 # clear in small sizes. However, its unicode glyph coverage is limited, the old
24 # X core fonts rendering does not support right-to-left and this being a bitmap
25 # font, it doesn't scale on retina/hidpi displays.
27 # use these keys for focus, movement, and resize directions when reaching for
28 # the arrows is not convenient
34 # use Mouse+Mod1 to drag floating windows to their wanted position
35 floating_modifier Mod1
38 bindsym Mod1+Return exec i3-sensible-terminal
41 bindsym Mod1+Shift+q kill
43 # start dmenu (a program launcher)
44 bindsym Mod1+d exec dmenu_run
45 # There also is the (new) i3-dmenu-desktop which only displays applications
46 # shipping a .desktop file. It is a wrapper around dmenu, so you need that
48 # bindsym Mod1+d exec --no-startup-id i3-dmenu-desktop
51 bindsym Mod1+$left focus left
52 bindsym Mod1+$down focus down
53 bindsym Mod1+$up focus up
54 bindsym Mod1+$right focus right
56 # alternatively, you can use the cursor keys:
57 bindsym Mod1+Left focus left
58 bindsym Mod1+Down focus down
59 bindsym Mod1+Up focus up
60 bindsym Mod1+Right focus right
63 bindsym Mod1+Shift+$left move left
64 bindsym Mod1+Shift+$down move down
65 bindsym Mod1+Shift+$up move up
66 bindsym Mod1+Shift+$right move right
68 # alternatively, you can use the cursor keys:
69 bindsym Mod1+Shift+Left move left
70 bindsym Mod1+Shift+Down move down
71 bindsym Mod1+Shift+Up move up
72 bindsym Mod1+Shift+Right move right
74 # split in horizontal orientation
75 bindsym Mod1+h split h
77 # split in vertical orientation
78 bindsym Mod1+v split v
80 # enter fullscreen mode for the focused container
81 bindsym Mod1+f fullscreen toggle
83 # change container layout (stacked, tabbed, toggle split)
84 bindsym Mod1+s layout stacking
85 bindsym Mod1+w layout tabbed
86 bindsym Mod1+e layout toggle split
88 # toggle tiling / floating
89 bindsym Mod1+Shift+space floating toggle
91 # change focus between tiling / floating windows
92 bindsym Mod1+space focus mode_toggle
94 # focus the parent container
95 bindsym Mod1+a focus parent
97 # focus the child container
98 #bindsym Mod1+d focus child
100 # move the currently focused window to the scratchpad
101 bindsym Mod1+Shift+minus move scratchpad
103 # Show the next scratchpad window or hide the focused scratchpad window.
104 # If there are multiple scratchpad windows, this command cycles through them.
105 bindsym Mod1+minus scratchpad show
107 # Define names for default workspaces for which we configure key bindings later on.
108 # We use variables to avoid repeating the names in multiple places.
121 # switch to workspace
122 bindsym Mod1+1 workspace $ws1
123 bindsym Mod1+2 workspace $ws2
124 bindsym Mod1+3 workspace $ws3
125 bindsym Mod1+4 workspace $ws4
126 bindsym Mod1+5 workspace $ws5
127 bindsym Mod1+6 workspace $ws6
128 bindsym Mod1+7 workspace $ws7
129 bindsym Mod1+8 workspace $ws8
130 bindsym Mod1+9 workspace $ws9
131 bindsym Mod1+0 workspace $ws10
133 # move focused container to workspace
134 bindsym Mod1+Shift+1 move container to workspace $ws1
135 bindsym Mod1+Shift+2 move container to workspace $ws2
136 bindsym Mod1+Shift+3 move container to workspace $ws3
137 bindsym Mod1+Shift+4 move container to workspace $ws4
138 bindsym Mod1+Shift+5 move container to workspace $ws5
139 bindsym Mod1+Shift+6 move container to workspace $ws6
140 bindsym Mod1+Shift+7 move container to workspace $ws7
141 bindsym Mod1+Shift+8 move container to workspace $ws8
142 bindsym Mod1+Shift+9 move container to workspace $ws9
143 bindsym Mod1+Shift+0 move container to workspace $ws10
145 # reload the configuration file
146 bindsym Mod1+Shift+c reload
147 # restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
148 bindsym Mod1+Shift+r restart
149 # exit i3 (logs you out of your X session)
150 bindsym Mod1+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"
152 # resize window (you can also use the mouse for that)
154 # These bindings trigger as soon as you enter the resize mode
156 # Pressing left will shrink the window’s width.
157 # Pressing right will grow the window’s width.
158 # Pressing up will shrink the window’s height.
159 # Pressing down will grow the window’s height.
160 bindsym $left resize shrink width 10 px or 10 ppt
161 bindsym $down resize grow height 10 px or 10 ppt
162 bindsym $up resize shrink height 10 px or 10 ppt
163 bindsym $right resize grow width 10 px or 10 ppt
165 # same bindings, but for the arrow keys
166 bindsym Left resize shrink width 10 px or 10 ppt
167 bindsym Down resize grow height 10 px or 10 ppt
168 bindsym Up resize shrink height 10 px or 10 ppt
169 bindsym Right resize grow width 10 px or 10 ppt
171 # back to normal: Enter or Escape or Mod1+r
172 bindsym Return mode "default"
173 bindsym Escape mode "default"
174 bindsym Mod1+r mode "default"
177 bindsym Mod1+r mode "resize"
179 # Start i3bar to display a workspace bar (plus the system information i3status
180 # finds out, if available)
182 status_command i3status
185 #######################################################################
186 # automatically start i3-config-wizard to offer the user to create a
187 # keysym-based config which used their favorite modifier (alt or windows)
189 # i3-config-wizard will not launch if there already is a config file
192 # Please remove the following exec line:
193 #######################################################################
194 exec i3-config-wizard