2 * (C) Copyright 2001-2005
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
5 * SPDX-License-Identifier: GPL-2.0+
10 * Configuration settings for the CPC45 board.
14 /* ------------------------------------------------------------------------- */
17 * board/config.h - configuration options, board specific
24 * High Level Configuration Options
28 #define CONFIG_MPC824X 1
29 #define CONFIG_MPC8245 1
30 #define CONFIG_CPC45 1
32 #define CONFIG_SYS_TEXT_BASE 0xFFF00000
34 #define CONFIG_CONS_INDEX 1
35 #define CONFIG_BAUDRATE 9600
37 #define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
39 #define CONFIG_BOOTDELAY 5
44 #define CONFIG_BOOTP_SUBNETMASK
45 #define CONFIG_BOOTP_GATEWAY
46 #define CONFIG_BOOTP_HOSTNAME
47 #define CONFIG_BOOTP_BOOTPATH
49 #define CONFIG_BOOTP_BOOTFILESIZE
53 * Command line configuration.
55 #include <config_cmd_default.h>
57 #define CONFIG_CMD_BEDBUG
58 #define CONFIG_CMD_DATE
59 #define CONFIG_CMD_DHCP
60 #define CONFIG_CMD_EEPROM
61 #define CONFIG_CMD_EXT2
62 #define CONFIG_CMD_FAT
63 #define CONFIG_CMD_FLASH
64 #define CONFIG_CMD_I2C
65 #define CONFIG_CMD_IDE
66 #define CONFIG_CMD_NFS
67 #define CONFIG_CMD_PCI
68 #define CONFIG_CMD_PING
69 #define CONFIG_CMD_SDRAM
70 #define CONFIG_CMD_SNTP
74 * Miscellaneous configurable options
76 #define CONFIG_SYS_LONGHELP /* undef to save memory */
77 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
78 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
81 #define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */
86 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
88 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
89 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
90 #define CONFIG_SYS_LOAD_ADDR 0x00100000 /* Default load address */
92 /*-----------------------------------------------------------------------
93 * Start addresses for the final memory configuration
94 * (Set up by the startup code)
95 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
98 #define CONFIG_SYS_SDRAM_BASE 0x00000000
100 #if defined(CONFIG_BOOT_ROM)
101 #define CONFIG_SYS_FLASH_BASE 0xFF000000
103 #define CONFIG_SYS_FLASH_BASE 0xFF800000
106 #define CONFIG_SYS_RESET_ADDRESS 0xFFF00100
108 #define CONFIG_SYS_EUMB_ADDR 0xFCE00000
110 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
112 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
113 #define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
115 #define CONFIG_SYS_MEMTEST_START 0x00004000 /* memtest works on */
116 #define CONFIG_SYS_MEMTEST_END 0x02000000 /* 0 ... 32 MB in DRAM */
118 /* Maximum amount of RAM.
120 #define CONFIG_SYS_MAX_RAM_SIZE 0x10000000
123 #if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
124 #undef CONFIG_SYS_RAMBOOT
126 #define CONFIG_SYS_RAMBOOT
130 /*-----------------------------------------------------------------------
131 * Definitions for initial stack pointer and data area
134 #define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
135 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000
136 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
139 * NS16550 Configuration
141 #define CONFIG_SYS_NS16550
142 #define CONFIG_SYS_NS16550_SERIAL
144 #define CONFIG_SYS_NS16550_REG_SIZE 1
146 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
148 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_EUMB_ADDR + 0x4500)
149 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_EUMB_ADDR + 0x4600)
150 #define DUART_DCR (CONFIG_SYS_EUMB_ADDR + 0x4511)
155 #define CONFIG_HARD_I2C 1 /* I2C with hardware support */
157 #define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
158 #define CONFIG_SYS_I2C_SLAVE 0x7F
163 #define CONFIG_RTC_PCF8563
164 #define CONFIG_SYS_I2C_RTC_ADDR 0x51
167 * EEPROM configuration
169 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x58
170 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
171 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4
172 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
173 #define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x07
176 * Low Level Configuration Settings
177 * (address mappings, register initial values, etc.)
178 * You should know what you are doing if you make changes here.
179 * For the detail description refer to the MPC8240 user's manual.
182 #define CONFIG_SYS_CLK_FREQ 33000000
183 #define CONFIG_SYS_HZ 1000
186 /* Bit-field values for MCCR1.
188 #define CONFIG_SYS_ROMNAL 0
189 #define CONFIG_SYS_ROMFAL 8
191 #define CONFIG_SYS_BANK0_ROW 0 /* SDRAM bank 7-0 row address */
192 #define CONFIG_SYS_BANK1_ROW 0
193 #define CONFIG_SYS_BANK2_ROW 0
194 #define CONFIG_SYS_BANK3_ROW 0
195 #define CONFIG_SYS_BANK4_ROW 0
196 #define CONFIG_SYS_BANK5_ROW 0
197 #define CONFIG_SYS_BANK6_ROW 0
198 #define CONFIG_SYS_BANK7_ROW 0
200 /* Bit-field values for MCCR2.
203 #define CONFIG_SYS_REFINT 0x2ec
205 /* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
207 #define CONFIG_SYS_BSTOPRE 160
209 /* Bit-field values for MCCR3.
211 #define CONFIG_SYS_REFREC 2 /* Refresh to activate interval */
212 #define CONFIG_SYS_RDLAT 0 /* Data latancy from read command */
214 /* Bit-field values for MCCR4.
216 #define CONFIG_SYS_PRETOACT 2 /* Precharge to activate interval */
217 #define CONFIG_SYS_ACTTOPRE 5 /* Activate to Precharge interval */
218 #define CONFIG_SYS_SDMODE_CAS_LAT 2 /* SDMODE CAS latancy */
219 #define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE wrap type */
220 #define CONFIG_SYS_SDMODE_BURSTLEN 2 /* SDMODE Burst length */
221 #define CONFIG_SYS_ACTORW 2
222 #define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
223 #define CONFIG_SYS_EXTROM 0
224 #define CONFIG_SYS_REGDIMM 0
226 /* Memory bank settings.
227 * Only bits 20-29 are actually used from these vales to set the
228 * start/end addresses. The upper two bits will always be 0, and the lower
229 * 20 bits will be 0x00000 for a start address, or 0xfffff for an end
230 * address. Refer to the MPC8240 book.
233 #define CONFIG_SYS_BANK0_START 0x00000000
234 #define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1)
235 #define CONFIG_SYS_BANK0_ENABLE 1
236 #define CONFIG_SYS_BANK1_START 0x3ff00000
237 #define CONFIG_SYS_BANK1_END 0x3fffffff
238 #define CONFIG_SYS_BANK1_ENABLE 0
239 #define CONFIG_SYS_BANK2_START 0x3ff00000
240 #define CONFIG_SYS_BANK2_END 0x3fffffff
241 #define CONFIG_SYS_BANK2_ENABLE 0
242 #define CONFIG_SYS_BANK3_START 0x3ff00000
243 #define CONFIG_SYS_BANK3_END 0x3fffffff
244 #define CONFIG_SYS_BANK3_ENABLE 0
245 #define CONFIG_SYS_BANK4_START 0x3ff00000
246 #define CONFIG_SYS_BANK4_END 0x3fffffff
247 #define CONFIG_SYS_BANK4_ENABLE 0
248 #define CONFIG_SYS_BANK5_START 0x3ff00000
249 #define CONFIG_SYS_BANK5_END 0x3fffffff
250 #define CONFIG_SYS_BANK5_ENABLE 0
251 #define CONFIG_SYS_BANK6_START 0x3ff00000
252 #define CONFIG_SYS_BANK6_END 0x3fffffff
253 #define CONFIG_SYS_BANK6_ENABLE 0
254 #define CONFIG_SYS_BANK7_START 0x3ff00000
255 #define CONFIG_SYS_BANK7_END 0x3fffffff
256 #define CONFIG_SYS_BANK7_ENABLE 0
258 #define CONFIG_SYS_ODCR 0xff
259 #define CONFIG_SYS_PGMAX 0x32 /* how long the 8240 retains the */
260 /* currently accessed page in memory */
261 /* see 8240 book for details */
263 #define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
264 #define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
266 #define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
267 #define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
269 #define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
270 #define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
272 #define CONFIG_SYS_IBAT3L (0xFC000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
273 #define CONFIG_SYS_IBAT3U (0xFC000000 | BATU_BL_64M | BATU_VS | BATU_VP)
275 #define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
276 #define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
277 #define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
278 #define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
279 #define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
280 #define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
281 #define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
282 #define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
285 * For booting Linux, the board info and command line data
286 * have to be in the first 8 MB of memory, since this is
287 * the maximum mapped by the Linux kernel during initialization.
289 #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
291 /*-----------------------------------------------------------------------
294 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max number of flash banks */
295 #define CONFIG_SYS_MAX_FLASH_SECT 39 /* Max number of sectors in one bank */
296 #define INTEL_ID_28F160F3T 0x88F388F3 /* 16M = 1M x 16 top boot sector */
297 #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
298 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
300 /* Warining: environment is not EMBEDDED in the ppcboot code.
301 * It's stored in flash separately.
303 #define CONFIG_ENV_IS_IN_FLASH 1
305 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x7F8000)
306 #define CONFIG_ENV_SIZE 0x4000 /* Size of the Environment */
307 #define CONFIG_ENV_OFFSET 0 /* starting right at the beginning */
308 #define CONFIG_ENV_SECT_SIZE 0x8000 /* Size of the Environment Sector */
310 /*-----------------------------------------------------------------------
311 * Cache Configuration
313 #define CONFIG_SYS_CACHELINE_SIZE 32
314 #if defined(CONFIG_CMD_KGDB)
315 # define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
318 /*----------------------------------------------------------------------*/
319 /* CPC45 Memory Map */
320 /*----------------------------------------------------------------------*/
321 #define SRAM_BASE 0x80000000 /* SRAM base address */
322 #define SRAM_END 0x801FFFFF
323 #define ST16552_A_BASE 0x80200000 /* ST16552 channel A */
324 #define ST16552_B_BASE 0x80400000 /* ST16552 channel A */
325 #define BCSR_BASE 0x80600000 /* board control / status registers */
326 #define DISPLAY_BASE 0x80600040 /* DISPLAY base */
327 #define PCMCIA_MEM_BASE 0x83000000 /* PCMCIA memory window base */
328 #define PCMCIA_IO_BASE 0xFE000000 /* PCMCIA IO window base */
330 #define CONFIG_SYS_SRAM_BASE SRAM_BASE
331 #define CONFIG_SYS_SRAM_SIZE (SRAM_END - SRAM_BASE + 1)
333 /*---------------------------------------------------------------------*/
334 /* CPC45 Control/Status Registers */
335 /*---------------------------------------------------------------------*/
336 #define IRQ_ENA_1 *((volatile uchar*)(BCSR_BASE + 0x00))
337 #define IRQ_STAT_1 *((volatile uchar*)(BCSR_BASE + 0x01))
338 #define IRQ_ENA_2 *((volatile uchar*)(BCSR_BASE + 0x02))
339 #define IRQ_STAT_2 *((volatile uchar*)(BCSR_BASE + 0x03))
340 #define BOARD_CTRL *((volatile uchar*)(BCSR_BASE + 0x04))
341 #define BOARD_STAT *((volatile uchar*)(BCSR_BASE + 0x05))
342 #define WDG_START *((volatile uchar*)(BCSR_BASE + 0x06))
343 #define WDG_PRESTOP *((volatile uchar*)(BCSR_BASE + 0x06))
344 #define WDG_STOP *((volatile uchar*)(BCSR_BASE + 0x06))
345 #define BOARD_REV *((volatile uchar*)(BCSR_BASE + 0x07))
347 /* IRQ_ENA_1 bit definitions */
348 #define I_ENA_1_IERA 0x80 /* INTA enable */
349 #define I_ENA_1_IERB 0x40 /* INTB enable */
350 #define I_ENA_1_IERC 0x20 /* INTC enable */
351 #define I_ENA_1_IERD 0x10 /* INTD enable */
353 /* IRQ_STAT_1 bit definitions */
354 #define I_STAT_1_INTA 0x80 /* INTA status */
355 #define I_STAT_1_INTB 0x40 /* INTB status */
356 #define I_STAT_1_INTC 0x20 /* INTC status */
357 #define I_STAT_1_INTD 0x10 /* INTD status */
359 /* IRQ_ENA_2 bit definitions */
360 #define I_ENA_2_IEAB 0x80 /* ABORT IRQ enable */
361 #define I_ENA_2_IEK1 0x40 /* KEY1 IRQ enable */
362 #define I_ENA_2_IEK2 0x20 /* KEY2 IRQ enable */
363 #define I_ENA_2_IERT 0x10 /* RTC IRQ enable */
364 #define I_ENA_2_IESM 0x08 /* LM81 IRQ enable */
365 #define I_ENA_2_IEDG 0x04 /* DEGENERATING IRQ enable */
366 #define I_ENA_2_IES2 0x02 /* ST16552/B IRQ enable */
367 #define I_ENA_2_IES1 0x01 /* ST16552/A IRQ enable */
369 /* IRQ_STAT_2 bit definitions */
370 #define I_STAT_2_ABO 0x80 /* ABORT IRQ status */
371 #define I_STAT_2_KY1 0x40 /* KEY1 IRQ status */
372 #define I_STAT_2_KY2 0x20 /* KEY2 IRQ status */
373 #define I_STAT_2_RTC 0x10 /* RTC IRQ status */
374 #define I_STAT_2_SMN 0x08 /* LM81 IRQ status */
375 #define I_STAT_2_DEG 0x04 /* DEGENERATING IRQ status */
376 #define I_STAT_2_SIO2 0x02 /* ST16552/B IRQ status */
377 #define I_STAT_2_SIO1 0x01 /* ST16552/A IRQ status */
379 /* BOARD_CTRL bit definitions */
380 #define USER_LEDS 2 /* 2 user LEDs */
383 #define B_CTRL_WRSE 0x80
384 #define B_CTRL_KRSE 0x40
385 #define B_CTRL_FWRE 0x20 /* Flash write enable */
386 #define B_CTRL_FWPT 0x10 /* Flash write protect */
387 #define B_CTRL_LED3 0x08 /* LED 3 control */
388 #define B_CTRL_LED2 0x04 /* LED 2 control */
389 #define B_CTRL_LED1 0x02 /* LED 1 control */
390 #define B_CTRL_LED0 0x01 /* LED 0 control */
392 #define B_CTRL_WRSE 0x80
393 #define B_CTRL_KRSE 0x40
394 #define B_CTRL_FWRE_1 0x20 /* Flash write enable */
395 #define B_CTRL_FWPT_1 0x10 /* Flash write protect */
396 #define B_CTRL_LED1 0x08 /* LED 1 control */
397 #define B_CTRL_LED0 0x04 /* LED 0 control */
398 #define B_CTRL_FWRE_0 0x02 /* Flash write enable */
399 #define B_CTRL_FWPT_0 0x01 /* Flash write protect */
402 /* BOARD_STAT bit definitions */
403 #define B_STAT_WDGE 0x80
404 #define B_STAT_WDGS 0x40
405 #define B_STAT_WRST 0x20
406 #define B_STAT_KRST 0x10
407 #define B_STAT_CSW3 0x08 /* sitch bit 3 status */
408 #define B_STAT_CSW2 0x04 /* sitch bit 2 status */
409 #define B_STAT_CSW1 0x02 /* sitch bit 1 status */
410 #define B_STAT_CSW0 0x01 /* sitch bit 0 status */
412 /*---------------------------------------------------------------------*/
413 /* Display addresses */
414 /*---------------------------------------------------------------------*/
415 #define DISP_UDC_RAM (DISPLAY_BASE + 0x08) /* UDC RAM */
416 #define DISP_CHR_RAM (DISPLAY_BASE + 0x18) /* character Ram */
417 #define DISP_FLASH (DISPLAY_BASE + 0x20) /* Flash Ram */
419 #define DISP_UDC_ADR *((volatile uchar*)(DISPLAY_BASE + 0x00)) /* UDC Address Reg. */
420 #define DISP_CWORD *((volatile uchar*)(DISPLAY_BASE + 0x10)) /* Control Word Reg. */
422 #define DISP_DIG0 *((volatile uchar*)(DISP_CHR_RAM + 0x00)) /* Digit 0 address */
423 #define DISP_DIG1 *((volatile uchar*)(DISP_CHR_RAM + 0x01)) /* Digit 0 address */
424 #define DISP_DIG2 *((volatile uchar*)(DISP_CHR_RAM + 0x02)) /* Digit 0 address */
425 #define DISP_DIG3 *((volatile uchar*)(DISP_CHR_RAM + 0x03)) /* Digit 0 address */
426 #define DISP_DIG4 *((volatile uchar*)(DISP_CHR_RAM + 0x04)) /* Digit 0 address */
427 #define DISP_DIG5 *((volatile uchar*)(DISP_CHR_RAM + 0x05)) /* Digit 0 address */
428 #define DISP_DIG6 *((volatile uchar*)(DISP_CHR_RAM + 0x06)) /* Digit 0 address */
429 #define DISP_DIG7 *((volatile uchar*)(DISP_CHR_RAM + 0x07)) /* Digit 0 address */
432 /*-----------------------------------------------------------------------
434 *-----------------------------------------------------------------------
436 #define CONFIG_PCI /* include pci support */
437 #define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
438 #define CONFIG_SYS_EARLY_PCI_INIT
439 #undef CONFIG_PCI_PNP
440 #undef CONFIG_PCI_SCAN_SHOW
443 #define CONFIG_EEPRO100
444 #define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
446 #define PCI_ENET0_IOADDR 0x82000000
447 #define PCI_ENET0_MEMADDR 0x82000000
448 #define PCI_PLX9030_IOADDR 0x82100000
449 #define PCI_PLX9030_MEMADDR 0x82100000
451 /*-----------------------------------------------------------------------
453 *-----------------------------------------------------------------------
456 #define CONFIG_I82365
458 #define CONFIG_SYS_PCMCIA_MEM_ADDR PCMCIA_MEM_BASE
459 #define CONFIG_SYS_PCMCIA_MEM_SIZE 0x1000
461 #define CONFIG_PCMCIA_SLOT_A
463 /*-----------------------------------------------------------------------
464 * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
465 *-----------------------------------------------------------------------
468 #define CONFIG_IDE_PREINIT 1 /* Use preinit IDE hook */
469 #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
471 #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
472 #undef CONFIG_IDE_RESET /* reset for IDE not supported */
473 #define CONFIG_IDE_LED /* LED for IDE is supported */
475 #define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
476 #define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
478 #define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
480 #define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR
482 #define CONFIG_SYS_ATA_DATA_OFFSET CONFIG_SYS_PCMCIA_MEM_SIZE
484 /* Offset for normal register accesses */
485 #define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
487 /* Offset for alternate registers */
488 #define CONFIG_SYS_ATA_ALT_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x400)
490 #define CONFIG_DOS_PARTITION
492 #endif /* __CONFIG_H */