2 * Copyright 2010-2012 Freescale Semiconductor, Inc.
3 * Authors: Srikanth Srinivasan <srikanth.srinivasan@freescale.com>
4 * Timur Tabi <timur@freescale.com>
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License as published by the Free
8 * Software Foundation; either version 2 of the License, or (at your option)
15 #include "../board/freescale/common/ics307_clk.h"
18 #define CONFIG_PHYS_64BIT
22 #define CONFIG_RAMBOOT_SDCARD
23 #define CONFIG_SYS_RAMBOOT
24 #define CONFIG_SYS_EXTRA_ENV_RELOC
25 #define CONFIG_SYS_TEXT_BASE 0x11000000
26 #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc
29 #ifdef CONFIG_SPIFLASH
30 #define CONFIG_RAMBOOT_SPIFLASH
31 #define CONFIG_SYS_RAMBOOT
32 #define CONFIG_SYS_EXTRA_ENV_RELOC
33 #define CONFIG_SYS_TEXT_BASE 0x11000000
34 #define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc
37 #define CONFIG_NAND_FSL_ELBC
41 #define CONFIG_SPL_INIT_MINIMAL
42 #define CONFIG_SPL_SERIAL_SUPPORT
43 #define CONFIG_SPL_NAND_SUPPORT
44 #define CONFIG_SPL_NAND_MINIMAL
45 #define CONFIG_SPL_FLUSH_IMAGE
46 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin"
48 #define CONFIG_SYS_TEXT_BASE 0x00201000
49 #define CONFIG_SPL_TEXT_BASE 0xfffff000
50 #define CONFIG_SPL_MAX_SIZE 4096
51 #define CONFIG_SPL_RELOC_TEXT_BASE 0x00100000
52 #define CONFIG_SPL_RELOC_STACK 0x00100000
53 #define CONFIG_SYS_NAND_U_BOOT_SIZE ((512 << 10) + CONFIG_SPL_MAX_SIZE)
54 #define CONFIG_SYS_NAND_U_BOOT_DST (0x00200000 - CONFIG_SPL_MAX_SIZE)
55 #define CONFIG_SYS_NAND_U_BOOT_START 0x00200000
56 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0
57 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
60 /* High Level Configuration Options */
61 #define CONFIG_BOOKE /* BOOKE */
62 #define CONFIG_E500 /* BOOKE e500 family */
63 #define CONFIG_MPC85xx /* MPC8540/60/55/41/48 */
65 #define CONFIG_P1022DS
66 #define CONFIG_MP /* support multiple processors */
68 #ifndef CONFIG_SYS_TEXT_BASE
69 #define CONFIG_SYS_TEXT_BASE 0xeff80000
72 #ifndef CONFIG_RESET_VECTOR_ADDRESS
73 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc
76 #define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */
77 #define CONFIG_PCI /* Enable PCI/PCIE */
78 #define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */
79 #define CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */
80 #define CONFIG_PCIE3 /* PCIE controler 3 (ULI bridge) */
81 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
82 #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */
83 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
85 #define CONFIG_ENABLE_36BIT_PHYS
87 #ifdef CONFIG_PHYS_64BIT
88 #define CONFIG_ADDR_MAP
89 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */
92 #define CONFIG_FSL_LAW /* Use common FSL init code */
94 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk()
95 #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk()
96 #define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 clock chip ref freq */
99 * These can be toggled for performance analysis, otherwise use default.
101 #define CONFIG_L2_CACHE
104 #define CONFIG_SYS_MEMTEST_START 0x00000000
105 #define CONFIG_SYS_MEMTEST_END 0x7fffffff
107 #define CONFIG_SYS_CCSRBAR 0xffe00000
108 #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
110 /* IN case of NAND bootloader relocate CCSRBAR in RAMboot code not in the 4k
112 #ifdef CONFIG_SPL_BUILD
113 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
118 #define CONFIG_DDR_SPD
119 #define CONFIG_VERY_BIG_RAM
120 #define CONFIG_FSL_DDR3
122 #ifdef CONFIG_DDR_ECC
123 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
124 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef
127 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
128 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
130 #define CONFIG_NUM_DDR_CONTROLLERS 1
131 #define CONFIG_DIMM_SLOTS_PER_CTLR 1
132 #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
134 /* I2C addresses of SPD EEPROMs */
135 #define CONFIG_SYS_SPD_BUS_NUM 1
136 #define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */
138 /* These are used when DDR doesn't use SPD. */
139 #define CONFIG_SYS_SDRAM_SIZE 2048
140 #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_2G
141 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000003F
142 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014202
143 #define CONFIG_SYS_DDR_CS1_BNDS 0x0040007F
144 #define CONFIG_SYS_DDR_CS1_CONFIG 0x80014202
145 #define CONFIG_SYS_DDR_TIMING_3 0x00010000
146 #define CONFIG_SYS_DDR_TIMING_0 0x40110104
147 #define CONFIG_SYS_DDR_TIMING_1 0x5c5bd746
148 #define CONFIG_SYS_DDR_TIMING_2 0x0fa8d4ca
149 #define CONFIG_SYS_DDR_MODE_1 0x00441221
150 #define CONFIG_SYS_DDR_MODE_2 0x00000000
151 #define CONFIG_SYS_DDR_INTERVAL 0x0a280100
152 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef
153 #define CONFIG_SYS_DDR_CLK_CTRL 0x02800000
154 #define CONFIG_SYS_DDR_CONTROL 0xc7000008
155 #define CONFIG_SYS_DDR_CONTROL_2 0x24401041
156 #define CONFIG_SYS_DDR_TIMING_4 0x00220001
157 #define CONFIG_SYS_DDR_TIMING_5 0x02401400
158 #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600
159 #define CONFIG_SYS_DDR_WRLVL_CONTROL 0x8675f608
165 * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable
166 * 0x8000_0000 0xdfff_ffff PCI Express Mem 1.5G non-cacheable
167 * 0xffc0_0000 0xffc2_ffff PCI IO range 192K non-cacheable
169 * Localbus cacheable (TBD)
170 * 0xXXXX_XXXX 0xXXXX_XXXX SRAM YZ M Cacheable
172 * Localbus non-cacheable
173 * 0xe000_0000 0xe80f_ffff Promjet/free 128M non-cacheable
174 * 0xe800_0000 0xefff_ffff FLASH 128M non-cacheable
175 * 0xff80_0000 0xff80_7fff NAND 32K non-cacheable
176 * 0xffdf_0000 0xffdf_7fff PIXIS 32K non-cacheable TLB0
177 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0
178 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable
182 * Local Bus Definitions
184 #define CONFIG_SYS_FLASH_BASE 0xe8000000 /* start of FLASH 128M */
185 #ifdef CONFIG_PHYS_64BIT
186 #define CONFIG_SYS_FLASH_BASE_PHYS 0xfe8000000ull
188 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE
191 #define CONFIG_FLASH_BR_PRELIM \
192 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V)
193 #define CONFIG_FLASH_OR_PRELIM (OR_AM_128MB | 0xff7)
196 #define CONFIG_SYS_BR1_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */
197 #define CONFIG_SYS_OR1_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */
199 #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */
200 #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */
203 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS}
204 #define CONFIG_SYS_FLASH_QUIET_TEST
205 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
207 #define CONFIG_SYS_MAX_FLASH_BANKS 1
208 #define CONFIG_SYS_MAX_FLASH_SECT 1024
210 #ifndef CONFIG_SYS_MONITOR_BASE
211 #ifdef CONFIG_SPL_BUILD
212 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE
214 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
218 #define CONFIG_FLASH_CFI_DRIVER
219 #define CONFIG_SYS_FLASH_CFI
220 #define CONFIG_SYS_FLASH_EMPTY_INFO
223 #if defined(CONFIG_NAND_FSL_ELBC)
224 #define CONFIG_SYS_NAND_BASE 0xff800000
225 #ifdef CONFIG_PHYS_64BIT
226 #define CONFIG_SYS_NAND_BASE_PHYS 0xfff800000ull
228 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE
231 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE, }
232 #define CONFIG_SYS_MAX_NAND_DEVICE 1
233 #define CONFIG_MTD_NAND_VERIFY_WRITE
234 #define CONFIG_CMD_NAND 1
235 #define CONFIG_SYS_NAND_BLOCK_SIZE (256 * 1024)
236 #define CONFIG_ELBC_NAND_SPL_STATIC_PGSIZE
238 /* NAND flash config */
239 #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
240 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \
241 | BR_PS_8 /* Port Size = 8 bit */ \
242 | BR_MS_FCM /* MSEL = FCM */ \
244 #define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB /* length 256K */ \
245 | OR_FCM_PGS /* Large Page*/ \
253 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
254 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
256 #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */
257 #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */
260 #endif /* CONFIG_NAND_FSL_ELBC */
262 #define CONFIG_BOARD_EARLY_INIT_F
263 #define CONFIG_BOARD_EARLY_INIT_R
264 #define CONFIG_MISC_INIT_R
265 #define CONFIG_HWCONFIG
267 #define CONFIG_FSL_NGPIXIS
268 #define PIXIS_BASE 0xffdf0000 /* PIXIS registers */
269 #ifdef CONFIG_PHYS_64BIT
270 #define PIXIS_BASE_PHYS 0xfffdf0000ull
272 #define PIXIS_BASE_PHYS PIXIS_BASE
275 #define CONFIG_SYS_BR2_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V)
276 #define CONFIG_SYS_OR2_PRELIM (OR_AM_32KB | 0x6ff7)
278 #define PIXIS_LBMAP_SWITCH 7
279 #define PIXIS_LBMAP_MASK 0xF0
280 #define PIXIS_LBMAP_ALTBANK 0x20
281 #define PIXIS_SPD 0x07
282 #define PIXIS_SPD_SYSCLK_MASK 0x07
283 #define PIXIS_ELBC_SPI_MASK 0xc0
284 #define PIXIS_SPI 0x80
286 #define CONFIG_SYS_INIT_RAM_LOCK
287 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */
288 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */
290 #define CONFIG_SYS_GBL_DATA_OFFSET \
291 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
292 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
294 #define CONFIG_SYS_MONITOR_LEN (512 * 1024)
295 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
300 #define CONFIG_CONS_INDEX 1
301 #define CONFIG_SYS_NS16550
302 #define CONFIG_SYS_NS16550_SERIAL
303 #define CONFIG_SYS_NS16550_REG_SIZE 1
304 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
305 #ifdef CONFIG_SPL_BUILD
306 #define CONFIG_NS16550_MIN_FUNCTIONS
309 #define CONFIG_SYS_BAUDRATE_TABLE \
310 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
312 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
313 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
315 /* Use the HUSH parser */
316 #define CONFIG_SYS_HUSH_PARSER
320 #ifdef CONFIG_FSL_DIU_FB
321 #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x10000)
323 #define CONFIG_CMD_BMP
324 #define CONFIG_CFB_CONSOLE
325 #define CONFIG_VIDEO_SW_CURSOR
326 #define CONFIG_VGA_AS_SINGLE_DEVICE
327 #define CONFIG_VIDEO_LOGO
328 #define CONFIG_VIDEO_BMP_LOGO
329 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS
331 * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so
332 * disable empty flash sector detection, which is I/O-intensive.
334 #undef CONFIG_SYS_FLASH_EMPTY_INFO
337 #ifndef CONFIG_FSL_DIU_FB
341 #define VIDEO_IO_OFFSET CONFIG_SYS_PCIE1_IO_VIRT
343 #define CONFIG_BIOSEMU
344 #define CONFIG_VIDEO_SW_CURSOR
345 #define CONFIG_ATI_RADEON_FB
346 #define CONFIG_VIDEO_LOGO
347 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
348 #define CONFIG_CFB_CONSOLE
349 #define CONFIG_VGA_AS_SINGLE_DEVICE
353 * Pass open firmware flat tree
355 #define CONFIG_OF_LIBFDT
356 #define CONFIG_OF_BOARD_SETUP
357 #define CONFIG_OF_STDOUT_VIA_ALIAS
359 /* new uImage format support */
361 #define CONFIG_FIT_VERBOSE
364 #define CONFIG_FSL_I2C
365 #define CONFIG_HARD_I2C
366 #define CONFIG_I2C_MULTI_BUS
367 #define CONFIG_SYS_I2C_SPEED 400000
368 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
369 #define CONFIG_SYS_I2C_SLAVE 0x7F
370 #define CONFIG_SYS_I2C_NOPROBES {{0, 0x29}}
371 #define CONFIG_SYS_I2C_OFFSET 0x3000
372 #define CONFIG_SYS_I2C2_OFFSET 0x3100
377 #define CONFIG_ID_EEPROM
378 #define CONFIG_SYS_I2C_EEPROM_NXID
379 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
380 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
381 #define CONFIG_SYS_EEPROM_BUS_NUM 1
384 * eSPI - Enhanced SPI
386 #define CONFIG_SPI_FLASH
387 #define CONFIG_SPI_FLASH_SPANSION
389 #define CONFIG_HARD_SPI
390 #define CONFIG_FSL_ESPI
392 #define CONFIG_CMD_SF
393 #define CONFIG_SF_DEFAULT_SPEED 10000000
394 #define CONFIG_SF_DEFAULT_MODE 0
398 * Memory space is mapped 1-1, but I/O space must start from 0.
401 /* controller 1, Slot 2, tgtid 1, Base address a000 */
402 #define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000
403 #ifdef CONFIG_PHYS_64BIT
404 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000
405 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc40000000ull
407 #define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000
408 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000
410 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
411 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc20000
412 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
413 #ifdef CONFIG_PHYS_64BIT
414 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc20000ull
416 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc20000
418 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */
420 /* controller 2, direct to uli, tgtid 2, Base address 9000 */
421 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000
422 #ifdef CONFIG_PHYS_64BIT
423 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000
424 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull
426 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000
427 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000
429 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */
430 #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000
431 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000
432 #ifdef CONFIG_PHYS_64BIT
433 #define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull
435 #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000
437 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */
439 /* controller 3, Slot 1, tgtid 3, Base address b000 */
440 #define CONFIG_SYS_PCIE3_MEM_VIRT 0x80000000
441 #ifdef CONFIG_PHYS_64BIT
442 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000
443 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc00000000ull
445 #define CONFIG_SYS_PCIE3_MEM_BUS 0x80000000
446 #define CONFIG_SYS_PCIE3_MEM_PHYS 0x80000000
448 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */
449 #define CONFIG_SYS_PCIE3_IO_VIRT 0xffc00000
450 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000
451 #ifdef CONFIG_PHYS_64BIT
452 #define CONFIG_SYS_PCIE3_IO_PHYS 0xfffc00000ull
454 #define CONFIG_SYS_PCIE3_IO_PHYS 0xffc00000
456 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */
459 #define CONFIG_PCI_INDIRECT_BRIDGE
460 #define CONFIG_PCI_PNP /* do pci plug-and-play */
461 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
462 #define CONFIG_E1000 /* Define e1000 pci Ethernet card */
466 #define CONFIG_LIBATA
467 #define CONFIG_FSL_SATA
468 #define CONFIG_FSL_SATA_V2
470 #define CONFIG_SYS_SATA_MAX_DEVICE 2
472 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR
473 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
475 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR
476 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA
478 #ifdef CONFIG_FSL_SATA
480 #define CONFIG_CMD_SATA
481 #define CONFIG_DOS_PARTITION
482 #define CONFIG_CMD_EXT2
487 #define CONFIG_CMD_MMC
488 #define CONFIG_FSL_ESDHC
489 #define CONFIG_GENERIC_MMC
490 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR
493 #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI)
494 #define CONFIG_CMD_EXT2
495 #define CONFIG_CMD_FAT
496 #define CONFIG_DOS_PARTITION
499 #define CONFIG_TSEC_ENET
500 #ifdef CONFIG_TSEC_ENET
502 #define CONFIG_TSECV2
504 #define CONFIG_MII /* MII PHY management */
505 #define CONFIG_TSEC1 1
506 #define CONFIG_TSEC1_NAME "eTSEC1"
507 #define CONFIG_TSEC2 1
508 #define CONFIG_TSEC2_NAME "eTSEC2"
510 #define TSEC1_PHY_ADDR 1
511 #define TSEC2_PHY_ADDR 2
513 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
514 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED)
516 #define TSEC1_PHYIDX 0
517 #define TSEC2_PHYIDX 0
519 #define CONFIG_ETHPRIME "eTSEC1"
521 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
527 #ifdef CONFIG_RAMBOOT_SPIFLASH
528 #define CONFIG_ENV_IS_IN_SPI_FLASH
529 #define CONFIG_ENV_SPI_BUS 0
530 #define CONFIG_ENV_SPI_CS 0
531 #define CONFIG_ENV_SPI_MAX_HZ 10000000
532 #define CONFIG_ENV_SPI_MODE 0
533 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */
534 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */
535 #define CONFIG_ENV_SECT_SIZE 0x10000
536 #elif defined(CONFIG_RAMBOOT_SDCARD)
537 #define CONFIG_ENV_IS_IN_MMC
538 #define CONFIG_ENV_SIZE 0x2000
539 #define CONFIG_SYS_MMC_ENV_DEV 0
540 #elif defined(CONFIG_NAND)
541 #define CONFIG_ENV_IS_IN_NAND
542 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
543 #define CONFIG_ENV_OFFSET ((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
544 #define CONFIG_ENV_RANGE (3 * CONFIG_ENV_SIZE)
545 #elif defined(CONFIG_SYS_RAMBOOT)
546 #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */
547 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
548 #define CONFIG_ENV_SIZE 0x2000
550 #define CONFIG_ENV_IS_IN_FLASH
551 #if CONFIG_SYS_MONITOR_BASE > 0xfff80000
552 #define CONFIG_ENV_ADDR 0xfff80000
554 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
556 #define CONFIG_ENV_SIZE 0x2000
557 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */
560 #define CONFIG_LOADS_ECHO
561 #define CONFIG_SYS_LOADS_BAUD_CHANGE
564 * Command line configuration.
566 #include <config_cmd_default.h>
568 #define CONFIG_CMD_ELF
569 #define CONFIG_CMD_ERRATA
570 #define CONFIG_CMD_IRQ
571 #define CONFIG_CMD_I2C
572 #define CONFIG_CMD_MII
573 #define CONFIG_CMD_PING
574 #define CONFIG_CMD_SETEXPR
575 #define CONFIG_CMD_REGINFO
578 #define CONFIG_CMD_PCI
579 #define CONFIG_CMD_NET
585 #define CONFIG_HAS_FSL_DR_USB
586 #ifdef CONFIG_HAS_FSL_DR_USB
587 #define CONFIG_USB_EHCI
589 #ifdef CONFIG_USB_EHCI
590 #define CONFIG_CMD_USB
591 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
592 #define CONFIG_USB_EHCI_FSL
593 #define CONFIG_USB_STORAGE
594 #define CONFIG_CMD_FAT
599 * Miscellaneous configurable options
601 #define CONFIG_SYS_LONGHELP /* undef to save memory */
602 #define CONFIG_CMDLINE_EDITING /* Command-line editing */
603 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */
604 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
605 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
606 #ifdef CONFIG_CMD_KGDB
607 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
609 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
611 /* Print Buffer Size */
612 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
613 #define CONFIG_SYS_MAXARGS 16
614 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
615 #define CONFIG_SYS_HZ 1000
618 * For booting Linux, the board info and command line data
619 * have to be in the first 64 MB of memory, since this is
620 * the maximum mapped by the Linux kernel during initialization.
622 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/
623 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
625 #ifdef CONFIG_CMD_KGDB
626 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
627 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
631 * Environment Configuration
634 #define CONFIG_HOSTNAME p1022ds
635 #define CONFIG_ROOTPATH "/opt/nfsroot"
636 #define CONFIG_BOOTFILE "uImage"
637 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */
639 #define CONFIG_LOADADDR 1000000
641 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
643 #define CONFIG_BAUDRATE 115200
645 #define CONFIG_EXTRA_ENV_SETTINGS \
647 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
648 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \
649 "tftpflash=tftpboot $loadaddr $uboot && " \
650 "protect off $ubootaddr +$filesize && " \
651 "erase $ubootaddr +$filesize && " \
652 "cp.b $loadaddr $ubootaddr $filesize && " \
653 "protect on $ubootaddr +$filesize && " \
654 "cmp.b $loadaddr $ubootaddr $filesize\0" \
655 "consoledev=ttyS0\0" \
656 "ramdiskaddr=2000000\0" \
657 "ramdiskfile=rootfs.ext2.gz.uboot\0" \
659 "fdtfile=p1022ds.dtb\0" \
661 "hwconfig=esdhc;audclk:12\0"
663 #define CONFIG_HDBOOT \
664 "setenv bootargs root=/dev/$bdev rw " \
665 "console=$consoledev,$baudrate $othbootargs $videobootargs;" \
666 "tftp $loadaddr $bootfile;" \
667 "tftp $fdtaddr $fdtfile;" \
668 "bootm $loadaddr - $fdtaddr"
670 #define CONFIG_NFSBOOTCOMMAND \
671 "setenv bootargs root=/dev/nfs rw " \
672 "nfsroot=$serverip:$rootpath " \
673 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
674 "console=$consoledev,$baudrate $othbootargs $videobootargs;" \
675 "tftp $loadaddr $bootfile;" \
676 "tftp $fdtaddr $fdtfile;" \
677 "bootm $loadaddr - $fdtaddr"
679 #define CONFIG_RAMBOOTCOMMAND \
680 "setenv bootargs root=/dev/ram rw " \
681 "console=$consoledev,$baudrate $othbootargs $videobootargs;" \
682 "tftp $ramdiskaddr $ramdiskfile;" \
683 "tftp $loadaddr $bootfile;" \
684 "tftp $fdtaddr $fdtfile;" \
685 "bootm $loadaddr $ramdiskaddr $fdtaddr"
687 #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND