2 * Copyright (C) 2011 Andes Technology Corporation
3 * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com>
4 * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
6 * SPDX-License-Identifier: GPL-2.0+
12 #include <asm/arch-ae3xx/ae3xx.h>
15 * CPU and Board Configuration Options
17 #define CONFIG_USE_INTERRUPT
19 #define CONFIG_SKIP_LOWLEVEL_INIT
21 #define CONFIG_SKIP_TRUNOFF_WATCHDOG
23 #define CONFIG_CMDLINE_EDITING
24 #define CONFIG_PANIC_HANG
26 #define CONFIG_ARCH_MAP_SYSMEM
28 #define CONFIG_BOOTP_SEND_HOSTNAME
29 #define CONFIG_BOOTP_SERVERIP
31 #ifdef CONFIG_SKIP_LOWLEVEL_INIT
32 #define CONFIG_SYS_TEXT_BASE 0x00500000
33 #ifdef CONFIG_OF_CONTROL
34 #undef CONFIG_OF_SEPARATE
35 #define CONFIG_OF_EMBED
39 #define CONFIG_SYS_TEXT_BASE 0x80000000
45 #define CONFIG_SYS_CLK_FREQ 39062500
46 #define VERSION_CLOCK CONFIG_SYS_CLK_FREQ
49 * Use Externel CLOCK or PCLK
51 #undef CONFIG_FTRTC010_EXTCLK
53 #ifndef CONFIG_FTRTC010_EXTCLK
54 #define CONFIG_FTRTC010_PCLK
57 #ifdef CONFIG_FTRTC010_EXTCLK
58 #define TIMER_CLOCK 32768 /* CONFIG_FTRTC010_EXTCLK */
60 #define TIMER_CLOCK CONFIG_SYS_HZ /* CONFIG_FTRTC010_PCLK */
63 #define TIMER_LOAD_VAL 0xffffffff
68 #define CONFIG_RTC_FTRTC010
71 * Real Time Clock Divider
72 * RTC_DIV_COUNT (OSC_CLK/OSC_5MHZ)
74 #define OSC_5MHZ (5*1000000)
75 #define OSC_CLK (4*OSC_5MHZ)
76 #define RTC_DIV_COUNT (0.5) /* Why?? */
79 * Serial console configuration
82 /* FTUART is a high speed NS 16C550A compatible UART, addr: 0x99600000 */
83 #define CONFIG_CONS_INDEX 1
84 #define CONFIG_SYS_NS16550_SERIAL
85 #define CONFIG_SYS_NS16550_COM1 CONFIG_FTUART010_02_BASE
86 #ifndef CONFIG_DM_SERIAL
87 #define CONFIG_SYS_NS16550_REG_SIZE -4
89 #define CONFIG_SYS_NS16550_CLK ((18432000 * 20) / 25) /* AG101P */
94 #define CONFIG_FTSDC010
95 #define CONFIG_FTSDC010_NUMBER 1
96 #define CONFIG_FTSDC010_SDIO
99 * Miscellaneous configurable options
101 #define CONFIG_SYS_LONGHELP /* undef to save memory */
104 * Size of malloc() pool
106 /* 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough */
107 #define CONFIG_SYS_MALLOC_LEN (512 << 10)
110 * Physical Memory Map
112 #define PHYS_SDRAM_0 0x00000000 /* SDRAM Bank #1 */
114 #define PHYS_SDRAM_1 \
115 (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE) /* SDRAM Bank #2 */
117 #define CONFIG_NR_DRAM_BANKS 2 /* we have 2 bank of DRAM */
119 #define PHYS_SDRAM_0_SIZE 0x20000000 /* 512 MB */
120 #define PHYS_SDRAM_1_SIZE 0x20000000 /* 512 MB */
122 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_0
124 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0xA0000 - \
125 GENERATED_GBL_DATA_SIZE)
128 * Load address and memory test area should agree with
129 * arch/nds32/config.mk. Be careful not to overwrite U-Boot itself.
131 #define CONFIG_SYS_LOAD_ADDR 0x300000
133 /* memtest works on 63 MB in DRAM */
134 #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_0
135 #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_0 + 0x03F00000)
138 * Static memory controller configuration
140 #define CONFIG_FTSMC020
142 #ifdef CONFIG_FTSMC020
143 #include <faraday/ftsmc020.h>
145 #define CONFIG_SYS_FTSMC020_CONFIGS { \
146 { FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, }, \
147 { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, }, \
150 #ifndef CONFIG_SKIP_LOWLEVEL_INIT /* FLASH is on BANK 0 */
151 #define FTSMC020_BANK0_LOWLV_CONFIG (FTSMC020_BANK_ENABLE | \
152 FTSMC020_BANK_SIZE_32M | \
153 FTSMC020_BANK_MBW_32)
155 #define FTSMC020_BANK0_LOWLV_TIMING (FTSMC020_TPR_RBE | \
156 FTSMC020_TPR_AST(1) | \
157 FTSMC020_TPR_CTW(1) | \
158 FTSMC020_TPR_ATI(1) | \
159 FTSMC020_TPR_AT2(1) | \
160 FTSMC020_TPR_WTC(1) | \
161 FTSMC020_TPR_AHT(1) | \
162 FTSMC020_TPR_TRNA(1))
166 * FLASH on ADP_AG101P is connected to BANK0
167 * Just disalbe the other BANK to avoid detection error.
169 #define FTSMC020_BANK0_CONFIG (FTSMC020_BANK_ENABLE | \
170 FTSMC020_BANK_BASE(PHYS_FLASH_1) | \
171 FTSMC020_BANK_SIZE_32M | \
172 FTSMC020_BANK_MBW_32)
174 #define FTSMC020_BANK0_TIMING (FTSMC020_TPR_AST(3) | \
175 FTSMC020_TPR_CTW(3) | \
176 FTSMC020_TPR_ATI(0xf) | \
177 FTSMC020_TPR_AT2(3) | \
178 FTSMC020_TPR_WTC(3) | \
179 FTSMC020_TPR_AHT(3) | \
180 FTSMC020_TPR_TRNA(0xf))
182 #define FTSMC020_BANK1_CONFIG (0x00)
183 #define FTSMC020_BANK1_TIMING (0x00)
184 #endif /* CONFIG_FTSMC020 */
187 * FLASH and environment organization
189 /* use CFI framework */
190 #define CONFIG_SYS_FLASH_CFI
191 #define CONFIG_FLASH_CFI_DRIVER
193 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
194 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
195 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL
198 #ifdef CONFIG_CFI_FLASH
199 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
202 /* Do not use CONFIG_FLASH_CFI_LEGACY to detect on board flash */
203 #define PHYS_FLASH_1 0x88000000 /* BANK 0 */
204 #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
205 #define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, }
206 #define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1
208 #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* TO for Flash Erase (ms) */
209 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* TO for Flash Write (ms) */
211 /* max number of memory banks */
213 * There are 4 banks supported for this Controller,
214 * but we have only 1 bank connected to flash on board
216 #ifndef CONFIG_SYS_MAX_FLASH_BANKS_DETECT
217 #define CONFIG_SYS_MAX_FLASH_BANKS 1
219 #define CONFIG_SYS_FLASH_BANKS_SIZES {0x4000000}
221 /* max number of sectors on one chip */
222 #define CONFIG_FLASH_SECTOR_SIZE (0x10000*2)
223 #define CONFIG_SYS_MAX_FLASH_SECT 512
226 #define CONFIG_ENV_SPI_BUS 0
227 #define CONFIG_ENV_SPI_CS 0
228 #define CONFIG_ENV_SPI_MAX_HZ 50000000
229 #define CONFIG_ENV_SPI_MODE 0
230 #define CONFIG_ENV_SECT_SIZE 0x1000
231 #define CONFIG_ENV_OFFSET 0x140000
232 #define CONFIG_ENV_SIZE 8192
233 #define CONFIG_ENV_OVERWRITE
237 #define CONFIG_SF_DEFAULT_BUS 0
238 #define CONFIG_SF_DEFAULT_CS 0
239 #define CONFIG_SF_DEFAULT_SPEED 1000000
240 #define CONFIG_SF_DEFAULT_MODE 0
243 * For booting Linux, the board info and command line data
244 * have to be in the first 16 MB of memory, since this is
245 * the maximum mapped by the Linux kernel during initialization.
248 /* Initial Memory map for Linux*/
249 #define CONFIG_SYS_BOOTMAPSZ (64 << 20)
250 /* Increase max gunzip size */
251 #define CONFIG_SYS_BOOTM_LEN (64 << 20)
253 #endif /* __CONFIG_H */