git.sur5r.net Git - u-boot/blob - include/configs/apalis_imx6.h

   1 /*
   2  * Copyright 2013-2015 Toradex, Inc.
   3  *
   4  * Configuration settings for the Toradex Apalis iMX6
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include "mx6_common.h"
  13
  14 #undef CONFIG_DISPLAY_BOARDINFO
  15 #define CONFIG_DISPLAY_BOARDINFO_LATE   /* Calls show_board_info() */
  16
  17 #define CONFIG_MACH_TYPE                4886
  18
  19 #define CONFIG_SYS_GENERIC_BOARD
  20
  21 #include <asm/arch/imx-regs.h>
  22 #include <asm/imx-common/gpio.h>
  23
  24 #ifdef CONFIG_SPL
  25 #include "imx6_spl.h"
  26 #define CONFIG_SPL_PAD_TO               0x11000 /* 4k IVT/DCD, 64k SPL */
  27 #endif
  28
  29 #define CONFIG_CMDLINE_TAG
  30 #define CONFIG_SETUP_MEMORY_TAGS
  31 #define CONFIG_INITRD_TAG
  32 #define CONFIG_REVISION_TAG
  33 #define CONFIG_SERIAL_TAG
  34
  35 /* Size of malloc() pool */
  36 #define CONFIG_SYS_MALLOC_LEN           (32 * 1024 * 1024)
  37
  38 #define CONFIG_MISC_INIT_R
  39
  40 #define CONFIG_MXC_UART
  41 #define CONFIG_MXC_UART_BASE            UART1_BASE
  42
  43 /* Make the HW version stuff available in U-Boot env */
  44 #define CONFIG_VERSION_VARIABLE         /* ver environment variable */
  45 #define CONFIG_ENV_VARS_UBOOT_CONFIG
  46 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  47
  48 /* I2C Configs */
  49 #define CONFIG_SYS_I2C
  50 #define CONFIG_SYS_I2C_MXC
  51 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
  52 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
  53 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
  54 #define CONFIG_SYS_I2C_SPEED            100000
  55
  56 /* OCOTP Configs */
  57 #define CONFIG_CMD_FUSE
  58 #ifdef CONFIG_CMD_FUSE
  59 #define CONFIG_MXC_OCOTP
  60 #endif
  61
  62 /* MMC Configs */
  63 #define CONFIG_FSL_ESDHC
  64 #define CONFIG_FSL_USDHC
  65 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  66 #define CONFIG_SYS_FSL_USDHC_NUM        3
  67
  68 #define CONFIG_SUPPORT_EMMC_BOOT        /* eMMC specific */
  69 #define CONFIG_BOUNCE_BUFFER
  70 #define CONFIG_FAT_WRITE
  71
  72 #ifdef CONFIG_MX6Q
  73 #define CONFIG_CMD_SATA
  74 #endif
  75
  76 /*
  77  * SATA Configs
  78  */
  79 #ifdef CONFIG_CMD_SATA
  80 #define CONFIG_DWC_AHSATA
  81 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  82 #define CONFIG_DWC_AHSATA_PORT_ID       0
  83 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  84 #define CONFIG_LBA48
  85 #define CONFIG_LIBATA
  86 #endif
  87
  88 /* Network */
  89 #define CONFIG_FEC_MXC
  90 #define CONFIG_MII
  91 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  92 #define CONFIG_FEC_XCV_TYPE             RGMII
  93 #define CONFIG_ETHPRIME                 "FEC"
  94 #define CONFIG_FEC_MXC_PHYADDR          6
  95 #define CONFIG_PHYLIB
  96 #define CONFIG_PHY_MICREL
  97 #define CONFIG_PHY_MICREL_KSZ9031
  98 #define CONFIG_IP_DEFRAG
  99 #define CONFIG_TFTP_BLOCKSIZE           4096
 100 #define CONFIG_TFTP_TSIZE
 101
 102 /* USB Configs */
 103 /* Host */
 104 #define CONFIG_USB_HOST_ETHER
 105 #define CONFIG_USB_MAX_CONTROLLER_COUNT         2
 106 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET        /* For OTG port */
 107 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 108 #define CONFIG_MXC_USB_FLAGS            0
 109 #define CONFIG_USB_KEYBOARD
 110 #ifdef CONFIG_USB_KEYBOARD
 111 #define CONFIG_SYS_USB_EVENT_POLL
 112 #endif /* CONFIG_USB_KEYBOARD */
 113 /* Client */
 114 #define CONFIG_USB_GADGET_VBUS_DRAW     2
 115 #define CONFIG_USBD_HS
 116
 117 #define CONFIG_USB_GADGET_MASS_STORAGE
 118 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 119 #define CONFIG_G_DNL_MANUFACTURER       "Toradex"
 120 /* USB DFU */
 121 #define CONFIG_DFU_MMC
 122
 123 /* Miscellaneous commands */
 124 #define CONFIG_MXC_GPIO
 125
 126 /* Framebuffer and LCD */
 127 #define CONFIG_VIDEO_IPUV3
 128 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 129 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 130 #define CONFIG_VIDEO_BMP_RLE8
 131 #define CONFIG_SPLASH_SCREEN
 132 #define CONFIG_SPLASH_SCREEN_ALIGN
 133 #define CONFIG_BMP_16BPP
 134 #define CONFIG_VIDEO_LOGO
 135 #define CONFIG_VIDEO_BMP_LOGO
 136 #define CONFIG_IPUV3_CLK                260000000
 137 #define CONFIG_CMD_HDMIDETECT
 138 #define CONFIG_CONSOLE_MUX
 139 #define CONFIG_IMX_HDMI
 140 #define CONFIG_IMX_VIDEO_SKIP
 141
 142 /* allow to overwrite serial and ethaddr */
 143 #define CONFIG_ENV_OVERWRITE
 144 #define CONFIG_CONS_INDEX               1
 145
 146 /* Command definition */
 147 #undef CONFIG_CMD_LOADB
 148 #undef CONFIG_CMD_LOADS
 149 #undef CONFIG_CMD_NFS
 150 #undef CONFIG_CMD_FLASH
 151
 152 #undef CONFIG_IPADDR
 153 #define CONFIG_IPADDR                   192.168.10.2
 154 #define CONFIG_NETMASK                  255.255.255.0
 155 #undef CONFIG_SERVERIP
 156 #define CONFIG_SERVERIP                 192.168.10.1
 157
 158 #define CONFIG_LOADADDR                 0x12000000
 159 #define CONFIG_SYS_TEXT_BASE            0x17800000
 160
 161 #ifdef CONFIG_CMD_SATA
 162 #define CONFIG_DRIVE_SATA "sata "
 163 #else
 164 #define CONFIG_DRIVE_SATA
 165 #endif
 166
 167 #ifdef CONFIG_CMD_MMC
 168 #define CONFIG_DRIVE_MMC "mmc "
 169 #else
 170 #define CONFIG_DRIVE_MMC
 171 #endif
 172
 173 #define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
 174
 175 #define DFU_ALT_EMMC_INFO \
 176         "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
 177         "boot part 0 1;" \
 178         "rootfs part 0 2;" \
 179         "uImage fat 0 1;" \
 180         "imx6q-colibri-eval-v3.dtb fat 0 1;" \
 181         "imx6q-colibri-cam-eval-v3.dtb fat 0 1"
 182
 183 #define EMMC_BOOTCMD \
 184         "emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext3 " \
 185                 "rootwait\0" \
 186         "emmcboot=run setup; " \
 187                 "setenv bootargs ${defargs} ${emmcargs} ${setupargs} " \
 188                 "${vidargs}; echo Booting from internal eMMC chip...; " \
 189                 "run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \
 190                 "${boot_file} && run fdt_fixup && " \
 191                 "bootm ${kernel_addr_r} ${dtbparam}\0" \
 192         "emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
 193                 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 194
 195 #define MEM_LAYOUT_ENV_SETTINGS \
 196         "bootm_size=0x20000000\0" \
 197         "fdt_addr_r=0x12000000\0" \
 198         "fdt_high=0xffffffff\0" \
 199         "initrd_high=0xffffffff\0" \
 200         "kernel_addr_r=0x11000000\0" \
 201         "ramdisk_addr_r=0x12100000\0"
 202
 203 #define NFS_BOOTCMD \
 204         "nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
 205         "nfsboot=run setup; " \
 206                 "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \
 207                 "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
 208                 "run nfsdtbload; dhcp ${kernel_addr_r} " \
 209                 "&& run fdt_fixup && bootm ${kernel_addr_r} ${dtbparam}\0" \
 210         "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \
 211                 "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 212
 213 #define SD_BOOTCMD                                              \
 214         "sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext3 " \
 215                 "rootwait\0" \
 216         "sdboot=run setup; " \
 217                 "setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
 218                 "${vidargs}; echo Booting from SD card; " \
 219                 "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
 220                 "${boot_file} && run fdt_fixup && " \
 221                 "bootm ${kernel_addr_r} ${dtbparam}\0" \
 222         "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
 223                 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 224
 225 #define USB_BOOTCMD \
 226         "usbargs=ip=off root=/dev/sda2 rw,noatime rootfstype=ext3 " \
 227                 "rootwait\0" \
 228         "usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \
 229                 "${usbargs} ${vidargs}; echo Booting from USB stick...; " \
 230                 "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
 231                 "${boot_file} && run fdt_fixup && " \
 232                 "bootm ${kernel_addr_r} ${dtbparam}\0" \
 233         "usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
 234                 "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
 235
 236 #ifndef CONFIG_TDX_APALIS_IMX6_V1_0
 237 #define FDT_FILE "imx6q-apalis-eval.dtb"
 238 #define FDT_FILE_V1_0 "imx6q-apalis_v1_0-eval.dtb"
 239 #else
 240 #define FDT_FILE "imx6q-apalis_v1_0-eval.dtb"
 241 #endif
 242 #define CONFIG_EXTRA_ENV_SETTINGS \
 243         "bootcmd=run emmcboot ; echo ; echo emmcboot failed ; " \
 244                 "run nfsboot ; echo ; echo nfsboot failed ; " \
 245                 "usb start ;" \
 246                 "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \
 247         "boot_file=uImage\0" \
 248         "console=ttymxc0\0" \
 249         "defargs=enable_wait_mode=off vmalloc=400M\0" \
 250         "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \
 251         EMMC_BOOTCMD \
 252         "fdt_file=" FDT_FILE "\0" \
 253         "fdt_fixup=;\0" \
 254         MEM_LAYOUT_ENV_SETTINGS \
 255         NFS_BOOTCMD \
 256         SD_BOOTCMD \
 257         "setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
 258                 "00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
 259                 "flash_eth.img && source ${loadaddr}\0" \
 260         "setsdupdate=setenv interface mmc; setenv drive 1; mmc rescan; load " \
 261                 "${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
 262                 "source ${loadaddr}\0" \
 263         "setup=setenv setupargs fec_mac=${ethaddr} " \
 264                 "consoleblank=0 no_console_suspend=1 console=tty1 " \
 265                 "console=${console},${baudrate}n8\0 " \
 266         "setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
 267         "setusbupdate=usb start && setenv interface usb; setenv drive 0; " \
 268                 "load ${interface} ${drive}:1 ${loadaddr} flash_blk.img && " \
 269                 "source ${loadaddr}\0" \
 270         "splashpos=m,m\0" \
 271         "vidargs=mxc_hdmi.only_cea=1 " \
 272                 "video=mxcfb0:dev=hdmi,1920x1080M@60,if=RGB24 " \
 273                 "video=mxcfb1:off video=mxcfb2:off video=mxcfb3:off " \
 274                 "fbmem=32M\0 "
 275
 276 /* Miscellaneous configurable options */
 277 #define CONFIG_SYS_LONGHELP
 278 #define CONFIG_AUTO_COMPLETE
 279 #undef CONFIG_SYS_CBSIZE
 280 #define CONFIG_SYS_CBSIZE               1024
 281 #undef CONFIG_SYS_MAXARGS
 282 #define CONFIG_SYS_MAXARGS              48
 283
 284 #define CONFIG_SYS_ALT_MEMTEST
 285 #define CONFIG_SYS_MEMTEST_START        0x10000000
 286 #define CONFIG_SYS_MEMTEST_END          0x10010000
 287 #define CONFIG_SYS_MEMTEST_SCRATCH      0x10800000
 288
 289 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 290
 291 #define CONFIG_CMDLINE_EDITING
 292
 293 /* Physical Memory Map */
 294 #define CONFIG_NR_DRAM_BANKS            1
 295 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 296
 297 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 298 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 299 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 300
 301 #define CONFIG_SYS_INIT_SP_OFFSET \
 302         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 303 #define CONFIG_SYS_INIT_SP_ADDR \
 304         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 305
 306 /* environment organization */
 307
 308 #define CONFIG_ENV_SIZE                 (8 * 1024)
 309
 310 #define CONFIG_ENV_IS_IN_MMC
 311
 312 #if defined(CONFIG_ENV_IS_IN_MMC)
 313 /* Environment in eMMC, before config block at the end of 1st "boot sector" */
 314 #define CONFIG_ENV_OFFSET               (-CONFIG_ENV_SIZE + \
 315                                          CONFIG_TDX_CFG_BLOCK_OFFSET)
 316 #define CONFIG_SYS_MMC_ENV_DEV          0
 317 #define CONFIG_SYS_MMC_ENV_PART         1
 318 #endif
 319
 320 #define CONFIG_OF_SYSTEM_SETUP
 321
 322 #define CONFIG_CMD_TIME
 323
 324 #define CONFIG_SUPPORT_RAW_INITRD
 325
 326 #define CONFIG_CRC32_VERIFY
 327
 328 #endif  /* __CONFIG_H */