2 * Copyright (C) 2015 Stefan Roese <sr@denx.de>
4 * SPDX-License-Identifier: GPL-2.0+
7 #ifndef _CONFIG_CLEARFOG_H
8 #define _CONFIG_CLEARFOG_H
11 * High Level Configuration Options (easy to change)
13 #define CONFIG_ARMADA_XP /* SOC Family Name */
14 #define CONFIG_ARMADA_38X
15 #define CONFIG_DB_88F6820_GP /* Board target name for DDR training */
17 #define CONFIG_DISPLAY_BOARDINFO_LATE
20 * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
21 * for DDR ECC byte filling in the SPL before loading the main
24 #define CONFIG_SYS_TEXT_BASE 0x00800000
25 #define CONFIG_SYS_TCLK 250000000 /* 250MHz */
28 * Commands configuration
30 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
31 #define CONFIG_CMD_BOOTZ
32 #define CONFIG_CMD_CACHE
33 #define CONFIG_CMD_DHCP
34 #define CONFIG_CMD_ENV
35 #define CONFIG_CMD_EXT2
36 #define CONFIG_CMD_EXT4
37 #define CONFIG_CMD_FAT
38 #define CONFIG_CMD_FS_GENERIC
39 #define CONFIG_CMD_I2C
40 #define CONFIG_CMD_MMC
41 #define CONFIG_CMD_PCI
42 #define CONFIG_CMD_PING
44 #define CONFIG_CMD_SPI
45 #define CONFIG_CMD_TFTPPUT
46 #define CONFIG_CMD_TIME
49 #define CONFIG_SYS_I2C
50 #define CONFIG_SYS_I2C_MVTWSI
51 #define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE
52 #define CONFIG_SYS_I2C_SLAVE 0x0
53 #define CONFIG_SYS_I2C_SPEED 100000
55 /* SPI NOR flash default params, used by sf commands */
56 #define CONFIG_SF_DEFAULT_SPEED 1000000
57 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
58 #define CONFIG_SPI_FLASH_STMICRO
61 * SDIO/MMC Card Configuration
64 #define CONFIG_MMC_SDMA
65 #define CONFIG_GENERIC_MMC
67 #define CONFIG_MV_SDHCI
68 #define CONFIG_SYS_MMC_BASE MVEBU_SDIO_BASE
70 /* Partition support */
71 #define CONFIG_DOS_PARTITION
72 #define CONFIG_EFI_PARTITION
74 /* Additional FS support/configuration */
75 #define CONFIG_SUPPORT_VFAT
77 /* USB/EHCI configuration */
78 #define CONFIG_EHCI_IS_TDI
80 #define CONFIG_ENV_MIN_ENTRIES 128
82 /* Environment in MMC */
83 #define CONFIG_ENV_IS_IN_MMC
84 #define CONFIG_SYS_MMC_ENV_DEV 0
85 #define CONFIG_ENV_SECT_SIZE 0x200
86 #define CONFIG_ENV_SIZE 0x10000
88 * For SD - reserve 1 LBA for MBR + 1M for u-boot image. The MMC/eMMC
89 * boot image starts @ LBA-0.
90 * As result in MMC/eMMC case it will be a 1 sector gap between u-boot
91 * image and environment
93 #define CONFIG_ENV_OFFSET 0xf0000
94 #define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET
96 #define CONFIG_PHY_MARVELL /* there is a marvell phy */
97 #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
100 #ifndef CONFIG_SPL_BUILD
102 #define CONFIG_PCI_MVEBU
103 #define CONFIG_PCI_PNP
104 #define CONFIG_PCI_SCAN_SHOW
107 #define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */
108 #define CONFIG_SYS_ALT_MEMTEST
110 /* Keep device tree and initrd in lower memory so the kernel can access them */
111 #define CONFIG_EXTRA_ENV_SETTINGS \
112 "fdt_high=0x10000000\0" \
113 "initrd_high=0x10000000\0"
117 * Select the boot device here
119 * Currently supported are:
120 * SPL_BOOT_SPI_NOR_FLASH - Booting via SPI NOR flash
121 * SPL_BOOT_SDIO_MMC_CARD - Booting via SDIO/MMC card (partition 1)
123 #define SPL_BOOT_SPI_NOR_FLASH 1
124 #define SPL_BOOT_SDIO_MMC_CARD 2
125 #define CONFIG_SPL_BOOT_DEVICE SPL_BOOT_SDIO_MMC_CARD
127 /* Defines for SPL */
128 #define CONFIG_SPL_FRAMEWORK
129 #define CONFIG_SPL_SIZE (140 << 10)
130 #define CONFIG_SPL_TEXT_BASE 0x40000030
131 #define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x0030)
133 #define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE)
134 #define CONFIG_SPL_BSS_MAX_SIZE (16 << 10)
136 #ifdef CONFIG_SPL_BUILD
137 #define CONFIG_SYS_MALLOC_SIMPLE
140 #define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10))
141 #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)
143 #define CONFIG_SPL_LIBCOMMON_SUPPORT
144 #define CONFIG_SPL_LIBGENERIC_SUPPORT
145 #define CONFIG_SPL_SERIAL_SUPPORT
146 #define CONFIG_SPL_I2C_SUPPORT
148 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SPI_NOR_FLASH
149 /* SPL related SPI defines */
150 #define CONFIG_SPL_SPI_SUPPORT
151 #define CONFIG_SPL_SPI_FLASH_SUPPORT
152 #define CONFIG_SPL_SPI_LOAD
153 #define CONFIG_SPL_SPI_BUS 0
154 #define CONFIG_SPL_SPI_CS 0
155 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
156 #define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS
159 #if CONFIG_SPL_BOOT_DEVICE == SPL_BOOT_SDIO_MMC_CARD
160 /* SPL related MMC defines */
161 #define CONFIG_SPL_MMC_SUPPORT
162 #define CONFIG_SPL_LIBDISK_SUPPORT
163 #define CONFIG_SYS_MMC_U_BOOT_OFFS (160 << 10)
164 #define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_MMC_U_BOOT_OFFS
165 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR ((CONFIG_SYS_U_BOOT_OFFS / 512)\
167 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS ((512 << 10) / 512) /* 512KiB */
168 #ifdef CONFIG_SPL_BUILD
169 #define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER 0x00180000 /* in SDRAM */
173 /* Enable DDR support in SPL (DDR3 training from Marvell bin_hdr) */
174 #define CONFIG_SYS_MVEBU_DDR_A38X
178 * mv-common.h should be defined after CMD configs since it used them
179 * to enable certain macros
181 #include "mv-common.h"
183 #endif /* _CONFIG_CLEARFOG_H */