git.sur5r.net Git - u-boot/blob - include/configs/colibri_vf.h

   1 /*
   2  * Copyright 2015-2016 Toradex, Inc.
   3  *
   4  * Configuration settings for the Toradex VF50/VF61 modules.
   5  *
   6  * Based on vf610twr.h:
   7  * Copyright 2013 Freescale Semiconductor, Inc.
   8  *
   9  * SPDX-License-Identifier:     GPL-2.0+
  10  */
  11
  12 #ifndef __CONFIG_H
  13 #define __CONFIG_H
  14
  15 #include <asm/arch/imx-regs.h>
  16
  17 #define CONFIG_SYS_FSL_CLK
  18
  19 #define CONFIG_DISPLAY_BOARDINFO_LATE   /* Calls show_board_info() */
  20
  21 #define CONFIG_SKIP_LOWLEVEL_INIT
  22
  23 #define CONFIG_CMD_FUSE
  24 #ifdef CONFIG_CMD_FUSE
  25 #define CONFIG_MXC_OCOTP
  26 #endif
  27
  28 #ifdef CONFIG_VIDEO_FSL_DCU_FB
  29 #define CONFIG_SPLASH_SCREEN_ALIGN
  30 #define CONFIG_VIDEO_LOGO
  31 #define CONFIG_VIDEO_BMP_LOGO
  32 #define CONFIG_SYS_FSL_DCU_LE
  33
  34 #define CONFIG_SYS_DCU_ADDR             DCU0_BASE_ADDR
  35 #define DCU_LAYER_MAX_NUM               64
  36 #endif
  37
  38 /* Size of malloc() pool */
  39 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
  40
  41 /* Allow to overwrite serial and ethaddr */
  42 #define CONFIG_ENV_OVERWRITE
  43 #define CONFIG_ENV_VARS_UBOOT_CONFIG
  44 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  45
  46 /* NAND support */
  47 #define CONFIG_CMD_NAND
  48 #define CONFIG_SYS_NAND_ONFI_DETECTION
  49 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  50 #define CONFIG_SYS_NAND_BASE            NFC_BASE_ADDR
  51
  52 /* Dynamic MTD partition support */
  53 #define CONFIG_CMD_MTDPARTS     /* Enable 'mtdparts' command line support */
  54 #define CONFIG_MTD_PARTITIONS
  55 #define CONFIG_MTD_DEVICE       /* needed for mtdparts commands */
  56 #define MTDIDS_DEFAULT          "nand0=vf610_nfc"
  57 #define MTDPARTS_DEFAULT        "mtdparts=vf610_nfc:"           \
  58                                 "128k(vf-bcb)ro,"               \
  59                                 "1408k(u-boot)ro,"              \
  60                                 "512k(u-boot-env),"             \
  61                                 "-(ubi)"
  62
  63 #define CONFIG_FSL_ESDHC
  64 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  65 #define CONFIG_SYS_FSL_ESDHC_NUM        1
  66
  67 #define CONFIG_RBTREE
  68 #define CONFIG_LZO
  69 #define CONFIG_CMD_UBIFS        /* increases size by almost 60 KB */
  70
  71 #define CONFIG_FEC_MXC
  72 #define CONFIG_MII
  73 #define IMX_FEC_BASE                    ENET1_BASE_ADDR
  74 #define CONFIG_FEC_XCV_TYPE             RMII
  75 #define CONFIG_FEC_MXC_PHYADDR          0
  76 #define CONFIG_PHYLIB
  77 #define CONFIG_PHY_MICREL
  78
  79 #define CONFIG_IPADDR           192.168.10.2
  80 #define CONFIG_NETMASK          255.255.255.0
  81 #define CONFIG_SERVERIP         192.168.10.1
  82
  83 #define CONFIG_LOADADDR                 0x80008000
  84 #define CONFIG_FDTADDR                  0x84000000
  85
  86 /* We boot from the gfxRAM area of the OCRAM. */
  87 #define CONFIG_SYS_TEXT_BASE            0x3f408000
  88 #define CONFIG_BOARD_SIZE_LIMIT         524288
  89
  90 #define SD_BOOTCMD \
  91         "sdargs=root=/dev/mmcblk0p2 rw rootwait\0"      \
  92         "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
  93         "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
  94         "load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
  95         "load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
  96         "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
  97
  98 #define NFS_BOOTCMD \
  99         "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
 100         "nfsboot=run setup; " \
 101         "setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
 102         "${setupargs} ${vidargs}; echo Booting from NFS...;" \
 103         "dhcp ${kernel_addr_r} && "     \
 104         "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
 105         "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 106
 107 #define UBI_BOOTCMD     \
 108         "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
 109         "ubi.fm_autoconvert=1\0" \
 110         "ubiboot=run setup; " \
 111         "setenv bootargs ${defargs} ${ubiargs} ${mtdparts} "   \
 112         "${setupargs} ${vidargs}; echo Booting from NAND...; " \
 113         "ubi part ubi && " \
 114         "ubi read ${kernel_addr_r} kernel && " \
 115         "ubi read ${fdt_addr_r} dtb && " \
 116         "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 117
 118 #define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
 119
 120 #define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"
 121
 122 #define CONFIG_EXTRA_ENV_SETTINGS \
 123         "kernel_addr_r=0x82000000\0" \
 124         "fdt_addr_r=0x84000000\0" \
 125         "kernel_file=zImage\0" \
 126         "fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
 127         "fdt_board=eval-v3\0" \
 128         "fdt_fixup=;\0" \
 129         "defargs=\0" \
 130         "console=ttyLP0\0" \
 131         "setup=setenv setupargs " \
 132         "console=tty1 console=${console}" \
 133         ",${baudrate}n8 ${memargs}\0" \
 134         "setsdupdate=mmc rescan && set interface mmc && " \
 135         "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
 136         "source ${loadaddr}\0" \
 137         "setusbupdate=usb start && set interface usb && " \
 138         "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
 139         "source ${loadaddr}\0" \
 140         "setupdate=run setsdupdate || run setusbupdate\0" \
 141         "mtdparts=" MTDPARTS_DEFAULT "\0" \
 142         "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
 143         "video-mode=dcufb:640x480-16@60,monitor=lcd\0" \
 144         "splashpos=m,m\0" \
 145         SD_BOOTCMD \
 146         NFS_BOOTCMD \
 147         UBI_BOOTCMD
 148
 149 /* Miscellaneous configurable options */
 150 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 151 #undef CONFIG_AUTO_COMPLETE
 152 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
 153 #define CONFIG_SYS_PBSIZE               \
 154                         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 155 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 156 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 157
 158 #define CONFIG_SYS_MEMTEST_START        0x80010000
 159 #define CONFIG_SYS_MEMTEST_END          0x87C00000
 160
 161 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 162 #define CONFIG_SYS_HZ                   1000
 163 #define CONFIG_CMDLINE_EDITING
 164
 165 /* Physical memory map */
 166 #define CONFIG_NR_DRAM_BANKS            1
 167 #define PHYS_SDRAM                      (0x80000000)
 168 #define PHYS_SDRAM_SIZE                 (256 * 1024 * 1024)
 169
 170 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 171 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 172 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 173
 174 #define CONFIG_SYS_INIT_SP_OFFSET \
 175         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 176 #define CONFIG_SYS_INIT_SP_ADDR \
 177         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 178
 179 /* Environment organization */
 180
 181 #ifdef CONFIG_ENV_IS_IN_MMC
 182 #define CONFIG_SYS_MMC_ENV_DEV          0
 183 #define CONFIG_ENV_OFFSET               (12 * 64 * 1024)
 184 #define CONFIG_ENV_SIZE                 (8 * 1024)
 185 #endif
 186
 187 #ifdef CONFIG_ENV_IS_IN_NAND
 188 #define CONFIG_ENV_SIZE                 (64 * 2048)
 189 #define CONFIG_ENV_RANGE                (4 * 64 * 2048)
 190 #define CONFIG_ENV_OFFSET               (12 * 64 * 2048)
 191 #endif
 192
 193 /* USB Host Support */
 194 #define CONFIG_USB_EHCI_VF
 195 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 196 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 197
 198 /* USB DFU */
 199 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)
 200
 201 /* USB Storage */
 202 #define CONFIG_USB_FUNCTION_MASS_STORAGE
 203
 204 #endif /* __CONFIG_H */