2 * Copyright 2015 Toradex, Inc.
4 * Configuration settings for the Toradex VF50/VF61 module.
7 * Copyright 2013 Freescale Semiconductor, Inc.
9 * SPDX-License-Identifier: GPL-2.0+
15 #define CONFIG_SYS_CACHELINE_SIZE 32
17 #include <asm/arch/imx-regs.h>
20 #define CONFIG_SYS_THUMB_BUILD
21 #define CONFIG_USE_ARCH_MEMCPY
22 #define CONFIG_USE_ARCH_MEMSET
23 #define CONFIG_SYS_FSL_CLK
25 #define CONFIG_ARCH_MISC_INIT
26 #define CONFIG_DISPLAY_CPUINFO
27 #define CONFIG_DISPLAY_BOARDINFO
29 #define CONFIG_SKIP_LOWLEVEL_INIT
31 #define CONFIG_CMD_FUSE
32 #ifdef CONFIG_CMD_FUSE
33 #define CONFIG_MXC_OCOTP
36 /* Size of malloc() pool */
37 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
39 #define CONFIG_BOARD_EARLY_INIT_F
41 /* Allow to overwrite serial and ethaddr */
42 #define CONFIG_ENV_OVERWRITE
43 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
44 #define CONFIG_VERSION_VARIABLE
45 #define CONFIG_BAUDRATE 115200
48 #define CONFIG_CMD_NAND
49 #define CONFIG_SYS_NAND_ONFI_DETECTION
50 #define CONFIG_SYS_MAX_NAND_DEVICE 1
51 #define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
53 /* Dynamic MTD partition support */
54 #define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */
55 #define CONFIG_MTD_PARTITIONS
56 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
57 #define MTDIDS_DEFAULT "nand0=vf610_nfc"
58 #define MTDPARTS_DEFAULT "mtdparts=vf610_nfc:" \
65 #define CONFIG_FSL_ESDHC
66 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
67 #define CONFIG_SYS_FSL_ESDHC_NUM 1
69 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
71 #define CONFIG_GENERIC_MMC
72 #define CONFIG_DOS_PARTITION
76 #define CONFIG_CMD_UBI
77 #define CONFIG_MTD_UBI_FASTMAP
78 #define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */
80 #define CONFIG_FEC_MXC
82 #define IMX_FEC_BASE ENET1_BASE_ADDR
83 #define CONFIG_FEC_XCV_TYPE RMII
84 #define CONFIG_FEC_MXC_PHYADDR 0
86 #define CONFIG_PHY_MICREL
88 #define CONFIG_IPADDR 192.168.10.2
89 #define CONFIG_NETMASK 255.255.255.0
90 #define CONFIG_SERVERIP 192.168.10.1
92 #define CONFIG_BOARD_LATE_INIT
94 #define CONFIG_LOADADDR 0x80008000
95 #define CONFIG_FDTADDR 0x84000000
97 /* We boot from the gfxRAM area of the OCRAM. */
98 #define CONFIG_SYS_TEXT_BASE 0x3f408000
99 #define CONFIG_BOARD_SIZE_LIMIT 524288
102 "sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \
103 "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
104 "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
105 "load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
106 "load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
107 "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
109 #define NFS_BOOTCMD \
110 "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
111 "nfsboot=run setup; " \
112 "setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
113 "${setupargs} ${vidargs}; echo Booting from NFS...;" \
114 "dhcp ${kernel_addr_r} && " \
115 "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
116 "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
118 #define UBI_BOOTCMD \
119 "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
120 "ubi.fm_autoconvert=1\0" \
121 "ubiboot=run setup; " \
122 "setenv bootargs ${defargs} ${ubiargs} ${mtdparts} " \
123 "${setupargs} ${vidargs}; echo Booting from NAND...; " \
124 "ubi part ubi && ubifsmount ubi0:rootfs && " \
125 "ubifsload ${kernel_addr_r} /boot/${kernel_file} && " \
126 "ubifsload ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
127 "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
129 #define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
131 #define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"
133 #define CONFIG_EXTRA_ENV_SETTINGS \
134 "kernel_addr_r=0x82000000\0" \
135 "fdt_addr_r=0x84000000\0" \
136 "kernel_file=zImage\0" \
137 "fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
138 "fdt_board=eval-v3\0" \
141 "setup=setenv setupargs " \
142 "console=tty1 console=${console}" \
143 ",${baudrate}n8 ${memargs}\0" \
144 "setsdupdate=mmc rescan && set interface mmc && " \
145 "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
146 "source ${loadaddr}\0" \
147 "setusbupdate=usb start && set interface usb && " \
148 "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
149 "source ${loadaddr}\0" \
150 "setupdate=run setsdupdate || run setusbupdate\0" \
151 "mtdparts=" MTDPARTS_DEFAULT "\0" \
152 "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
157 /* Miscellaneous configurable options */
158 #define CONFIG_SYS_LONGHELP /* undef to save memory */
159 #undef CONFIG_AUTO_COMPLETE
160 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
161 #define CONFIG_SYS_PBSIZE \
162 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
163 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
164 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
166 #define CONFIG_SYS_MEMTEST_START 0x80010000
167 #define CONFIG_SYS_MEMTEST_END 0x87C00000
169 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
170 #define CONFIG_SYS_HZ 1000
171 #define CONFIG_CMDLINE_EDITING
175 * The stack sizes are set up in start.S using the settings below
177 #define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
179 /* Physical memory map */
180 #define CONFIG_NR_DRAM_BANKS 1
181 #define PHYS_SDRAM (0x80000000)
182 #define PHYS_SDRAM_SIZE (256 * 1024 * 1024)
184 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
185 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
186 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
188 #define CONFIG_SYS_INIT_SP_OFFSET \
189 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
190 #define CONFIG_SYS_INIT_SP_ADDR \
191 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
193 /* Environment organization */
194 #define CONFIG_SYS_NO_FLASH
196 #ifdef CONFIG_ENV_IS_IN_MMC
197 #define CONFIG_SYS_MMC_ENV_DEV 0
198 #define CONFIG_ENV_OFFSET (12 * 64 * 1024)
199 #define CONFIG_ENV_SIZE (8 * 1024)
202 #ifdef CONFIG_ENV_IS_IN_NAND
203 #define CONFIG_ENV_SIZE (64 * 2048)
204 #define CONFIG_ENV_RANGE (4 * 64 * 2048)
205 #define CONFIG_ENV_OFFSET (12 * 64 * 2048)
208 #define CONFIG_SYS_NO_FLASH
210 #define CONFIG_SYS_CACHELINE_SIZE 32
212 /* USB Host Support */
213 #define CONFIG_USB_EHCI
214 #define CONFIG_USB_EHCI_VF
215 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
216 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
218 /* USB Client Support */
219 #define CONFIG_TRDX_VID 0x1B67
220 #define CONFIG_TRDX_PID_COLIBRI_VF50 0x0016
221 #define CONFIG_TRDX_PID_COLIBRI_VF61 0x0017
222 #define CONFIG_TRDX_PID_COLIBRI_VF61IT 0x0018
223 #define CONFIG_TRDX_PID_COLIBRI_VF50IT 0x0019
226 #define CONFIG_USB_FUNCTION_DFU
227 #define CONFIG_DFU_NAND
228 #define CONFIG_DFU_MMC
229 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)
232 #define CONFIG_USB_STORAGE
233 #define CONFIG_USB_FUNCTION_MASS_STORAGE
235 #endif /* __CONFIG_H */