2 * Copyright 2015-2016 Toradex, Inc.
4 * Configuration settings for the Toradex VF50/VF61 modules.
7 * Copyright 2013 Freescale Semiconductor, Inc.
9 * SPDX-License-Identifier: GPL-2.0+
15 #include <asm/arch/imx-regs.h>
17 #define CONFIG_SYS_FSL_CLK
19 #define CONFIG_DISPLAY_BOARDINFO_LATE /* Calls show_board_info() */
21 #define CONFIG_SKIP_LOWLEVEL_INIT
23 #define CONFIG_CMD_FUSE
24 #ifdef CONFIG_CMD_FUSE
25 #define CONFIG_MXC_OCOTP
28 /* Size of malloc() pool */
29 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
31 /* Allow to overwrite serial and ethaddr */
32 #define CONFIG_ENV_OVERWRITE
33 #define CONFIG_ENV_VARS_UBOOT_CONFIG
34 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
37 #define CONFIG_CMD_NAND
38 #define CONFIG_SYS_NAND_ONFI_DETECTION
39 #define CONFIG_SYS_MAX_NAND_DEVICE 1
40 #define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
42 /* Dynamic MTD partition support */
43 #define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */
44 #define CONFIG_MTD_PARTITIONS
45 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
46 #define MTDIDS_DEFAULT "nand0=vf610_nfc"
47 #define MTDPARTS_DEFAULT "mtdparts=vf610_nfc:" \
53 #define CONFIG_FSL_ESDHC
54 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
55 #define CONFIG_SYS_FSL_ESDHC_NUM 1
59 #define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */
61 #define CONFIG_FEC_MXC
63 #define IMX_FEC_BASE ENET1_BASE_ADDR
64 #define CONFIG_FEC_XCV_TYPE RMII
65 #define CONFIG_FEC_MXC_PHYADDR 0
67 #define CONFIG_PHY_MICREL
69 #define CONFIG_IPADDR 192.168.10.2
70 #define CONFIG_NETMASK 255.255.255.0
71 #define CONFIG_SERVERIP 192.168.10.1
73 #define CONFIG_LOADADDR 0x80008000
74 #define CONFIG_FDTADDR 0x84000000
76 /* We boot from the gfxRAM area of the OCRAM. */
77 #define CONFIG_SYS_TEXT_BASE 0x3f408000
78 #define CONFIG_BOARD_SIZE_LIMIT 524288
81 "sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \
82 "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \
83 "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
84 "load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \
85 "load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \
86 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
89 "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
90 "nfsboot=run setup; " \
91 "setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \
92 "${setupargs} ${vidargs}; echo Booting from NFS...;" \
93 "dhcp ${kernel_addr_r} && " \
94 "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
95 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
98 "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
99 "ubi.fm_autoconvert=1\0" \
100 "ubiboot=run setup; " \
101 "setenv bootargs ${defargs} ${ubiargs} ${mtdparts} " \
102 "${setupargs} ${vidargs}; echo Booting from NAND...; " \
104 "ubi read ${kernel_addr_r} kernel && " \
105 "ubi read ${fdt_addr_r} dtb && " \
106 "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
108 #define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
110 #define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4"
112 #define CONFIG_EXTRA_ENV_SETTINGS \
113 "kernel_addr_r=0x82000000\0" \
114 "fdt_addr_r=0x84000000\0" \
115 "kernel_file=zImage\0" \
116 "fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \
117 "fdt_board=eval-v3\0" \
121 "setup=setenv setupargs " \
122 "console=tty1 console=${console}" \
123 ",${baudrate}n8 ${memargs}\0" \
124 "setsdupdate=mmc rescan && set interface mmc && " \
125 "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
126 "source ${loadaddr}\0" \
127 "setusbupdate=usb start && set interface usb && " \
128 "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \
129 "source ${loadaddr}\0" \
130 "setupdate=run setsdupdate || run setusbupdate\0" \
131 "mtdparts=" MTDPARTS_DEFAULT "\0" \
132 "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
137 /* Miscellaneous configurable options */
138 #define CONFIG_SYS_LONGHELP /* undef to save memory */
139 #undef CONFIG_AUTO_COMPLETE
140 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
141 #define CONFIG_SYS_PBSIZE \
142 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
143 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
144 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
146 #define CONFIG_SYS_MEMTEST_START 0x80010000
147 #define CONFIG_SYS_MEMTEST_END 0x87C00000
149 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
150 #define CONFIG_SYS_HZ 1000
151 #define CONFIG_CMDLINE_EDITING
153 /* Physical memory map */
154 #define CONFIG_NR_DRAM_BANKS 1
155 #define PHYS_SDRAM (0x80000000)
156 #define PHYS_SDRAM_SIZE (256 * 1024 * 1024)
158 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
159 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
160 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
162 #define CONFIG_SYS_INIT_SP_OFFSET \
163 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
164 #define CONFIG_SYS_INIT_SP_ADDR \
165 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
167 /* Environment organization */
169 #ifdef CONFIG_ENV_IS_IN_MMC
170 #define CONFIG_SYS_MMC_ENV_DEV 0
171 #define CONFIG_ENV_OFFSET (12 * 64 * 1024)
172 #define CONFIG_ENV_SIZE (8 * 1024)
175 #ifdef CONFIG_ENV_IS_IN_NAND
176 #define CONFIG_ENV_SIZE (64 * 2048)
177 #define CONFIG_ENV_RANGE (4 * 64 * 2048)
178 #define CONFIG_ENV_OFFSET (12 * 64 * 2048)
181 /* USB Host Support */
182 #define CONFIG_USB_EHCI
183 #define CONFIG_USB_EHCI_VF
184 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
185 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
188 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024)
191 #define CONFIG_USB_FUNCTION_MASS_STORAGE
193 #endif /* __CONFIG_H */