3 * Stefan Herbrechtsmeier <stefan@herbrechtsmeier.net>
5 * Based on Kirkwood support:
7 * Marvell Semiconductor <www.marvell.com>
8 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
10 * SPDX-License-Identifier: GPL-2.0+
13 #ifndef _CONFIG_DNS325_H
14 #define _CONFIG_DNS325_H
17 * Machine number definition
19 #define MACH_TYPE_DNS325 3800
20 #define CONFIG_MACH_TYPE MACH_TYPE_DNS325
21 #define CONFIG_IDENT_STRING "\nD-Link DNS-325"
24 * High Level Configuration Options (easy to change)
26 #define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
27 #define CONFIG_KW88F6281 /* SOC Name */
28 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
31 * Commands configuration
33 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
34 #define CONFIG_CMD_DHCP
35 #define CONFIG_CMD_ENV
36 #define CONFIG_CMD_NAND
37 #define CONFIG_CMD_PING
38 #define CONFIG_CMD_USB
39 #define CONFIG_CMD_IDE
40 #define CONFIG_CMD_DATE
41 #define CONFIG_SYS_MVFS
43 #define CONFIG_NR_DRAM_BANKS 1
46 * mv-common.h should be defined after CMD configs since it used them
47 * to enable certain macros
49 #include "mv-common.h"
51 /* Remove or override few declarations from mv-common.h */
52 #undef CONFIG_SYS_PROMPT
55 * Ethernet Driver configuration
58 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
59 #define CONFIG_NETCONSOLE
63 * SATA Driver configuration
65 #ifdef CONFIG_MVSATA_IDE
66 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
67 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
71 * RTC driver configuration
73 #ifdef CONFIG_CMD_DATE
80 #define CONFIG_KIRKWOOD_GPIO
83 * Console configuration
85 #define CONFIG_CONSOLE_MUX
86 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
89 * Display cpu info at boot
91 #define CONFIG_DISPLAY_CPUINFO
94 * Environment variables configurations
96 #ifdef CONFIG_CMD_NAND
97 #define CONFIG_ENV_IS_IN_NAND
98 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128KB */
100 #define CONFIG_ENV_IS_NOWHERE
103 #define CONFIG_ENV_SIZE 0x20000 /* 128KB */
104 #define CONFIG_ENV_ADDR 0xe0000
105 #define CONFIG_ENV_OFFSET 0xe0000 /* env starts here */
108 * Default environment variables
110 #define MTDIDS_DEFAULT "nand0=orion_nand"
112 #define MTDPARTS_DEFAULT "mtdparts=orion_nand:" \
113 "896k(u-boot),128k(u-boot-env),5m(kernel),-(rootfs)\0"
115 #define CONFIG_EXTRA_ENV_SETTINGS \
119 "loadaddr=0x800000\0" \
121 "console=ttyS0,115200\0" \
122 "mtdparts="MTDPARTS_DEFAULT \
124 "bootenv=uEnv.txt\0" \
125 "importbootenv=echo Importing environment ...; " \
126 "env import -t ${loadaddr} ${filesize}\0" \
127 "loadbootenv=fatload usb 0 ${loadaddr} ${bootenv}\0" \
128 "setbootargs=setenv bootargs console=${console} " \
131 "root=${bootenvroot} " \
132 "rootfstype=${bootenvrootfstype}\0" \
133 "subbootcmd=run setbootargs; " \
134 "if run bootenvloadimage; then " \
135 "bootm ${loadaddr};" \
137 "nandroot=ubi0:rootfs ubi.mtd=rootfs\0" \
138 "nandrootfstype=ubifs\0" \
139 "nandloadimage=nand read ${loadaddr} kernel\0" \
140 "setnandbootenv=echo Booting from nand ...; " \
141 "setenv bootenvroot ${nandroot}; " \
142 "setenv bootenvrootfstype ${nandrootfstype}; " \
143 "setenv bootenvloadimage ${nandloadimage}\0"
145 #define CONFIG_BOOTCOMMAND \
146 "if test -n ${bootenv} && usb start; then " \
147 "if run loadbootenv; then " \
148 "echo Loaded environment ${bootenv} from usb;" \
149 "run importbootenv;" \
151 "if test -n ${bootenvcmd}; then " \
152 "echo Running bootenvcmd ...;" \
156 "run setnandbootenv subbootcmd;"
158 #endif /* _CONFIG_DNS325_H */