2 * iPAQ h2200 board configuration
4 * Copyright (C) 2012 Lukasz Dalek <luk0104@gmail.com>
6 * SPDX-License-Identifier: GPL-2.0+
12 #define CONFIG_MACH_TYPE MACH_TYPE_H2200
14 #define CONFIG_CPU_PXA25X 1
16 #define CONFIG_NR_DRAM_BANKS 1
17 #define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
18 #define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
20 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
21 #define CONFIG_SYS_SDRAM_SIZE PHYS_SDRAM_1_SIZE
23 #define CONFIG_SYS_INIT_SP_ADDR 0xfffff800
25 #define CONFIG_ENV_SIZE 0x00040000
26 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
28 #define CONFIG_SYS_LOAD_ADDR 0xa3000000 /* default load address */
31 * iPAQ 1st stage bootloader loads 2nd stage bootloader
32 * at address 0xa0040000 but bootloader requires header
33 * which is 0x1000 long.
35 * --- Header begin ---
36 * .word 0xea0003fe ; b 0x1000
49 #define CONFIG_SYS_MSC0_VAL 0x246c7ffc
50 #define CONFIG_SYS_MSC1_VAL 0x7ff07ff0
51 #define CONFIG_SYS_MSC2_VAL 0x7ff07ff0
54 * PCMCIA and CF Interfaces
57 #define CONFIG_SYS_MECR_VAL 0x00000000
58 #define CONFIG_SYS_MCMEM0_VAL 0x00000000
59 #define CONFIG_SYS_MCMEM1_VAL 0x00000000
60 #define CONFIG_SYS_MCATT0_VAL 0x00000000
61 #define CONFIG_SYS_MCATT1_VAL 0x00000000
62 #define CONFIG_SYS_MCIO0_VAL 0x00000000
63 #define CONFIG_SYS_MCIO1_VAL 0x00000000
65 #define CONFIG_SYS_FLYCNFG_VAL 0x00000000
66 #define CONFIG_SYS_SXCNFG_VAL 0x00040004
68 #define CONFIG_SYS_MDREFR_VAL 0x0099E018
69 #define CONFIG_SYS_MDCNFG_VAL 0x01C801CB
70 #define CONFIG_SYS_MDMRS_VAL 0x00220022
72 #define CONFIG_SYS_PSSR_VAL 0x00000000
73 #define CONFIG_SYS_CKEN 0x00004840
74 #define CONFIG_SYS_CCCR 0x00000161
80 #define CONFIG_SYS_GPSR0_VAL 0x01000000
81 #define CONFIG_SYS_GPSR1_VAL 0x00000000
82 #define CONFIG_SYS_GPSR2_VAL 0x00010000
84 #define CONFIG_SYS_GPCR0_VAL 0x00000000
85 #define CONFIG_SYS_GPCR1_VAL 0x00000000
86 #define CONFIG_SYS_GPCR2_VAL 0x00000000
88 #define CONFIG_SYS_GPDR0_VAL 0xF7E38C00
89 #define CONFIG_SYS_GPDR1_VAL 0xBCFFBF83
90 #define CONFIG_SYS_GPDR2_VAL 0x000157FF
92 #define CONFIG_SYS_GAFR0_L_VAL 0x80401000
93 #define CONFIG_SYS_GAFR0_U_VAL 0x00000112
94 #define CONFIG_SYS_GAFR1_L_VAL 0x600A9550
95 #define CONFIG_SYS_GAFR1_U_VAL 0x0005AAAA
96 #define CONFIG_SYS_GAFR2_L_VAL 0x20000000
97 #define CONFIG_SYS_GAFR2_U_VAL 0x00000000
102 #define CONFIG_FFUART
104 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 38400, 115200 }
106 #define CONFIG_SETUP_MEMORY_TAGS
107 #define CONFIG_CMDLINE_TAG
108 #define CONFIG_INITRD_TAG
110 /* Monitor Command Prompt */
112 #define CONFIG_USB_DEV_PULLUP_GPIO 33
113 /* USB VBUS GPIO 3 */
115 #define CONFIG_BOOTCOMMAND \
116 "setenv downloaded 0 ; while test $downloaded -eq 0 ; do " \
117 "if bootp ; then setenv downloaded 1 ; fi ; done ; " \
118 "source :script ; " \
121 #define CONFIG_USB_GADGET_PXA2XX
122 #define CONFIG_USB_ETH_SUBSET
124 #define CONFIG_USBNET_DEV_ADDR "de:ad:be:ef:00:01"
125 #define CONFIG_EXTRA_ENV_SETTINGS \
130 #endif /* __CONFIG_H */