2 * iPAQ h2200 board configuration
4 * Copyright (C) 2012 Lukasz Dalek <luk0104@gmail.com>
6 * SPDX-License-Identifier: GPL-2.0+
12 #define CONFIG_MACH_TYPE MACH_TYPE_H2200
14 #define CONFIG_CPU_PXA25X 1
15 #define CONFIG_BOARD_H2200
17 #define CONFIG_SYS_NO_FLASH
19 #define CONFIG_NR_DRAM_BANKS 1
20 #define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
21 #define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
23 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
24 #define CONFIG_SYS_SDRAM_SIZE PHYS_SDRAM_1_SIZE
26 #define CONFIG_SYS_INIT_SP_ADDR 0xfffff800
28 #define CONFIG_ENV_SIZE 0x00040000
29 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
31 #define CONFIG_ENV_IS_NOWHERE
32 #define CONFIG_SYS_MAXARGS 16
33 #define CONFIG_SYS_LOAD_ADDR 0xa3000000 /* default load address */
36 * iPAQ 1st stage bootloader loads 2nd stage bootloader
37 * at address 0xa0040000 but bootloader requires header
38 * which is 0x1000 long.
40 * --- Header begin ---
41 * .word 0xea0003fe ; b 0x1000
50 #define CONFIG_SYS_TEXT_BASE 0xa0041000
56 #define CONFIG_SYS_MSC0_VAL 0x246c7ffc
57 #define CONFIG_SYS_MSC1_VAL 0x7ff07ff0
58 #define CONFIG_SYS_MSC2_VAL 0x7ff07ff0
61 * PCMCIA and CF Interfaces
64 #define CONFIG_SYS_MECR_VAL 0x00000000
65 #define CONFIG_SYS_MCMEM0_VAL 0x00000000
66 #define CONFIG_SYS_MCMEM1_VAL 0x00000000
67 #define CONFIG_SYS_MCATT0_VAL 0x00000000
68 #define CONFIG_SYS_MCATT1_VAL 0x00000000
69 #define CONFIG_SYS_MCIO0_VAL 0x00000000
70 #define CONFIG_SYS_MCIO1_VAL 0x00000000
72 #define CONFIG_SYS_FLYCNFG_VAL 0x00000000
73 #define CONFIG_SYS_SXCNFG_VAL 0x00040004
75 #define CONFIG_SYS_MDREFR_VAL 0x0099E018
76 #define CONFIG_SYS_MDCNFG_VAL 0x01C801CB
77 #define CONFIG_SYS_MDMRS_VAL 0x00220022
79 #define CONFIG_SYS_PSSR_VAL 0x00000000
80 #define CONFIG_SYS_CKEN 0x00004840
81 #define CONFIG_SYS_CCCR 0x00000161
87 #define CONFIG_SYS_GPSR0_VAL 0x01000000
88 #define CONFIG_SYS_GPSR1_VAL 0x00000000
89 #define CONFIG_SYS_GPSR2_VAL 0x00010000
91 #define CONFIG_SYS_GPCR0_VAL 0x00000000
92 #define CONFIG_SYS_GPCR1_VAL 0x00000000
93 #define CONFIG_SYS_GPCR2_VAL 0x00000000
95 #define CONFIG_SYS_GPDR0_VAL 0xF7E38C00
96 #define CONFIG_SYS_GPDR1_VAL 0xBCFFBF83
97 #define CONFIG_SYS_GPDR2_VAL 0x000157FF
99 #define CONFIG_SYS_GAFR0_L_VAL 0x80401000
100 #define CONFIG_SYS_GAFR0_U_VAL 0x00000112
101 #define CONFIG_SYS_GAFR1_L_VAL 0x600A9550
102 #define CONFIG_SYS_GAFR1_U_VAL 0x0005AAAA
103 #define CONFIG_SYS_GAFR2_L_VAL 0x20000000
104 #define CONFIG_SYS_GAFR2_U_VAL 0x00000000
109 #define CONFIG_FFUART
110 #define CONFIG_CONS_INDEX 3
112 #define CONFIG_BAUDRATE 115200
113 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 38400, 115200 }
115 #define CONFIG_FIT_DISABLE_SHA256
116 #define CONFIG_SETUP_MEMORY_TAGS
117 #define CONFIG_CMDLINE_TAG
118 #define CONFIG_INITRD_TAG
120 /* Monitor Command Prompt */
122 /* Console I/O Buffer Size */
123 #define CONFIG_SYS_CBSIZE 256
125 /* Print Buffer Size */
126 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
127 sizeof(CONFIG_SYS_PROMPT) + 16)
129 #define CONFIG_BOOTARGS "root=/dev/ram0 ro console=ttyS0,115200n8"
131 #define CONFIG_USB_DEV_PULLUP_GPIO 33
132 /* USB VBUS GPIO 3 */
134 #define CONFIG_BOOTCOMMAND \
135 "setenv downloaded 0 ; while test $downloaded -eq 0 ; do " \
136 "if bootp ; then setenv downloaded 1 ; fi ; done ; " \
137 "source :script ; " \
140 #define CONFIG_USB_GADGET_PXA2XX
141 #define CONFIG_USB_ETHER
142 #define CONFIG_USB_ETH_SUBSET
144 #define CONFIG_USBNET_DEV_ADDR "de:ad:be:ef:00:01"
145 #define CONFIG_USBNET_HOST_ADDR "de:ad:be:ef:00:02"
146 #define CONFIG_EXTRA_ENV_SETTINGS \
151 #endif /* __CONFIG_H */