2 * Copyright 2010-2011 Calxeda, Inc.
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms of the GNU General Public License as published by the Free
6 * Software Foundation; either version 2 of the License, or (at your option)
9 * This program is distributed in the hope it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
14 * You should have received a copy of the GNU General Public License along with
15 * this program. If not, see <http://www.gnu.org/licenses/>.
21 #define CONFIG_SYS_DCACHE_OFF
23 #define CONFIG_SYS_THUMB_BUILD
25 #define CONFIG_SYS_NO_FLASH
27 #define CONFIG_SYS_HZ CFG_HZ
29 #define CONFIG_OF_LIBFDT
30 #define CONFIG_OF_BOARD_SETUP
32 #define CONFIG_SUPPORT_RAW_INITRD
33 #define CONFIG_SYS_BOOTMAPSZ (16 << 20)
36 * Size of malloc() pool
38 #define CONFIG_SYS_MALLOC_LEN (512 * 1024)
40 #define CONFIG_PL011_SERIAL
41 #define CONFIG_PL011_CLOCK 150000000
42 #define CONFIG_PL01x_PORTS { (void *)(0xFFF36000) }
43 #define CONFIG_CONS_INDEX 0
45 #define CONFIG_BAUDRATE 115200
47 #define CONFIG_BOOTCOUNT_LIMIT
48 #define CONFIG_SYS_BOOTCOUNT_SINGLEWORD
49 #define CONFIG_SYS_BOOTCOUNT_LE /* Use little-endian accessors */
50 #define CONFIG_SYS_BOOTCOUNT_ADDR 0xfff3cf0c
52 #define CONFIG_MISC_INIT_R
53 #define CONFIG_SCSI_AHCI
54 #define CONFIG_SCSI_AHCI_PLAT
55 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 5
56 #define CONFIG_SYS_SCSI_MAX_LUN 1
57 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
58 CONFIG_SYS_SCSI_MAX_LUN)
60 #define CONFIG_DOS_PARTITION
61 #define CONFIG_EFI_PARTITION
63 #define CONFIG_CALXEDA_XGMAC
66 #define CONFIG_BOOTP_PXE
67 #define CONFIG_BOOTP_PXE_CLIENTARCH 0x100
68 #define CONFIG_BOOTP_VCI_STRING "U-boot.armv7.highbank"
71 * Command line configuration.
73 #include <config_cmd_default.h>
75 #define CONFIG_CMD_BDI
76 #define CONFIG_CMD_BOOTZ
77 #define CONFIG_CMD_DHCP
78 #define CONFIG_CMD_ELF
79 #define CONFIG_CMD_MEMORY
80 #define CONFIG_CMD_LOADS
81 #define CONFIG_CMD_SCSI
82 #define CONFIG_CMD_EXT2
83 #define CONFIG_CMD_EXT4
84 #define CONFIG_CMD_FAT
85 #define CONFIG_CMD_PXE
88 #define CONFIG_BOOTDELAY 2
89 #define CONFIG_BOOT_RETRY_TIME -1
90 #define CONFIG_RESET_TO_RETRY
93 * Miscellaneous configurable options
95 #define CONFIG_CMDLINE_EDITING
96 #define CONFIG_AUTO_COMPLETE
97 #define CONFIG_SYS_LONGHELP /* undef to save memory */
98 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
99 #define CONFIG_SYS_MAXARGS 16 /* max number of cmd args */
100 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
101 #define CONFIG_SYS_PROMPT "Highbank #"
102 #define CONFIG_SYS_HUSH_PARSER
103 /* Print Buffer Size */
104 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
105 sizeof(CONFIG_SYS_PROMPT)+16)
107 #define CONFIG_SYS_LOAD_ADDR 0x800000
108 #define CONFIG_SYS_64BIT_LBA
111 /*-----------------------------------------------------------------------
112 * Physical Memory Map
114 #define CONFIG_NR_DRAM_BANKS 1
115 #define PHYS_SDRAM_1_SIZE (4089 << 20)
116 #define CONFIG_SYS_MEMTEST_START 0x100000
117 #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1_SIZE - 0x100000)
119 /* Environment data setup
121 #define CONFIG_ENV_IS_IN_NVRAM
122 #define CONFIG_SYS_NVRAM_BASE_ADDR 0xfff88000 /* NVRAM base address */
123 #define CONFIG_SYS_NVRAM_SIZE 0x8000 /* NVRAM size */
124 #define CONFIG_ENV_SIZE 0x2000 /* Size of Environ */
125 #define CONFIG_ENV_ADDR CONFIG_SYS_NVRAM_BASE_ADDR
127 #define CONFIG_SYS_SDRAM_BASE 0x00000000
128 #define CONFIG_SYS_TEXT_BASE 0x00008000
129 #define CONFIG_SYS_INIT_SP_ADDR 0x01000000
130 #define CONFIG_SKIP_LOWLEVEL_INIT