2 * SPL definitions for the i.MX7 SPL
4 * (C) Copyright 2017 CompuLab, Ltd. http://www.compulab.com
6 * Author: Uri Mashiach <uri.mashiach@compulab.co.il>
8 * SPDX-License-Identifier: GPL-2.0+
11 #ifndef __IMX7_SPL_CONFIG_H
12 #define __IMX7_SPL_CONFIG_H
16 * see figure 6-22 in i.MX 7Dual/Solo Reference manuals:
17 * - IMX7D/S OCRAM free area RAM (OCRAM) is from 0x00910000 to
19 * - Set the stack at the end of the free area section, at 0x00946BB8.
20 * - The BOOT ROM loads what they consider the firmware image
21 * which consists of a 4K header in front of us that contains the IVT, DCD
22 * and some padding thus 'our' max size is really 0x00946BB8 - 0x00911000.
23 * 64KB is more then enough for the SPL.
25 #define CONFIG_SPL_TEXT_BASE 0x00911000
26 #define CONFIG_SPL_MAX_SIZE 0x10000
27 #define CONFIG_SPL_STACK 0x00946BB8
29 * Pad SPL to 68KB (4KB header + 64KB max size). This allows to write the
30 * SPL/U-Boot combination generated with u-boot-with-spl.imx directly to a
31 * boot media (given that boot media specific offset is configured properly).
33 #define CONFIG_SPL_PAD_TO 0x11000
36 #if defined(CONFIG_SPL_MMC_SUPPORT)
37 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
38 #define CONFIG_SYS_MONITOR_LEN 409600 /* 400 KB */
41 /* Define the payload for FAT/EXT support */
42 #if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
43 # ifdef CONFIG_OF_CONTROL
44 # define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-dtb.img"
46 # define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
50 #define CONFIG_SPL_BSS_START_ADDR 0x88200000
51 #define CONFIG_SPL_BSS_MAX_SIZE 0x100000 /* 1 MB */
52 #define CONFIG_SYS_SPL_MALLOC_START 0x88300000
53 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 /* 1 MB */
55 #endif /* CONFIG_SPL */
57 #endif /* __IMX7_SPL_CONFIG_H */