3 * Marvell Semiconductor <www.marvell.com>
4 * Prafulla Wadaskar <prafulla@marvell.com>
7 * Stefan Roese, DENX Software Engineering, sr@denx.de.
9 * (C) Copyright 2011-2012
10 * Holger Brunck, Keymile GmbH Hannover, holger.brunck@keymile.com
11 * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com
13 * SPDX-License-Identifier: GPL-2.0+
17 * for linking errors see
18 * http://lists.denx.de/pipermail/u-boot/2009-July/057350.html
21 #ifndef _CONFIG_KM_KIRKWOOD_H
22 #define _CONFIG_KM_KIRKWOOD_H
25 #if defined(CONFIG_KM_KIRKWOOD)
26 #define CONFIG_IDENT_STRING "\nKeymile Kirkwood"
27 #define CONFIG_HOSTNAME km_kirkwood
28 #define CONFIG_KM_DISABLE_PCIE
29 #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
32 #elif defined(CONFIG_KM_KIRKWOOD_PCI)
33 #define CONFIG_IDENT_STRING "\nKeymile Kirkwood PCI"
34 #define CONFIG_HOSTNAME km_kirkwood_pci
35 #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
36 #define CONFIG_KM_FPGA_CONFIG
38 /* KM_KIRKWOOD_128M16 */
39 #elif defined(CONFIG_KM_KIRKWOOD_128M16)
40 #define CONFIG_IDENT_STRING "\nKeymile Kirkwood 128M16"
41 #define CONFIG_HOSTNAME km_kirkwood_128m16
42 #undef CONFIG_SYS_KWD_CONFIG
43 #define CONFIG_SYS_KWD_CONFIG \
44 $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
45 #define CONFIG_KM_DISABLE_PCIE
46 #define KM_IVM_BUS "pca9544a:70:9" /* I2C2 (Mux-Port 1)*/
49 #elif defined(CONFIG_KM_NUSA)
50 #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
51 #define CONFIG_IDENT_STRING "\nKeymile NUSA"
52 #define CONFIG_HOSTNAME kmnusa
53 #undef CONFIG_SYS_KWD_CONFIG
54 #define CONFIG_SYS_KWD_CONFIG \
55 $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg
56 #define CONFIG_KM_ENV_IS_IN_SPI_NOR
57 #define CONFIG_KM_FPGA_CONFIG
58 #define CONFIG_KM_PIGGY4_88E6352
59 #define CONFIG_MV88E6352_SWITCH
60 #define CONFIG_KM_MVEXTSW_ADDR 0x10
63 #elif defined(CONFIG_KM_MGCOGE3UN)
64 #define CONFIG_IDENT_STRING "\nKeymile COGE3UN"
65 #define CONFIG_HOSTNAME mgcoge3un
66 #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
67 #undef CONFIG_SYS_KWD_CONFIG
68 #define CONFIG_SYS_KWD_CONFIG \
69 $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage-memphis.cfg
70 #define CONFIG_KM_BOARD_EXTRA_ENV "waitforne=true\0"
71 #define CONFIG_PIGGY_MAC_ADRESS_OFFSET 3
72 #define CONFIG_KM_DISABLE_PCIE
73 #define CONFIG_KM_PIGGY4_88E6061
76 #elif defined(CONFIG_KM_COGE5UN)
77 #define CONFIG_IDENT_STRING "\nKeymile COGE5UN"
78 #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
79 #undef CONFIG_SYS_KWD_CONFIG
80 #define CONFIG_SYS_KWD_CONFIG \
81 $(SRCTREE)/$(CONFIG_BOARDDIR)/kwbimage_256M8_1.cfg
82 #define CONFIG_KM_ENV_IS_IN_SPI_NOR
83 #define CONFIG_PIGGY_MAC_ADRESS_OFFSET 3
84 #define CONFIG_HOSTNAME kmcoge5un
85 #define CONFIG_KM_DISABLE_PCIE
86 #define CONFIG_KM_PIGGY4_88E6352
89 #elif defined(CONFIG_KM_PORTL2)
90 #define CONFIG_IDENT_STRING "\nKeymile Port-L2"
91 #define CONFIG_HOSTNAME portl2
92 #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
93 #define CONFIG_KM_PIGGY4_88E6061
96 #elif defined(CONFIG_KM_SUV31)
97 #define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/
98 #define CONFIG_IDENT_STRING "\nKeymile SUV31"
99 #define CONFIG_HOSTNAME kmsuv31
100 #define CONFIG_KM_ENV_IS_IN_SPI_NOR
101 #define CONFIG_KM_FPGA_CONFIG
104 #error ("Board unsupported")
107 /* include common defines/options for all arm based Keymile boards */
108 #include "km/km_arm.h"
110 #ifndef CONFIG_KM_ENV_IS_IN_SPI_NOR
111 #define KM_ENV_BUS 5 /* I2C2 (Mux-Port 5)*/
114 #if defined(CONFIG_KM_PIGGY4_88E6352)
116 * Some keymile boards like mgcoge5un & nusa1 have their PIGGY4 connected via
117 * an Marvell 88E6352 simple switch.
118 * In this case we have to change the default settings for the etherent mac.
119 * There is NO ethernet phy. The ARM and Switch are conencted directly over
120 * RGMII in MAC-MAC mode
121 * In this case 1GBit full duplex and autoneg off
123 #define PORT_SERIAL_CONTROL_VALUE ( \
124 MVGBE_FORCE_LINK_PASS | \
125 MVGBE_DIS_AUTO_NEG_FOR_DUPLX | \
126 MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL | \
127 MVGBE_ADV_NO_FLOW_CTRL | \
128 MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \
129 MVGBE_FORCE_BP_MODE_NO_JAM | \
130 (1 << 9) /* Reserved bit has to be 1 */ | \
131 MVGBE_DO_NOT_FORCE_LINK_FAIL | \
132 MVGBE_DIS_AUTO_NEG_SPEED_GMII | \
134 MVGBE_MIIPHY_MAC_MODE | \
135 MVGBE_AUTO_NEG_NO_CHANGE | \
136 MVGBE_MAX_RX_PACKET_1552BYTE | \
137 MVGBE_CLR_EXT_LOOPBACK | \
138 MVGBE_SET_FULL_DUPLEX_MODE | \
139 MVGBE_EN_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\
140 MVGBE_SET_GMII_SPEED_TO_1000 |\
141 MVGBE_SET_MII_SPEED_TO_100)
145 #ifdef CONFIG_KM_PIGGY4_88E6061
147 * Some keymile boards like mgcoge3un have their PIGGY4 connected via
148 * an Marvell 88E6061 simple switch.
149 * In this case we have to change the default settings for the
150 * ethernet phy connected to the kirkwood.
151 * In this case 100MB full duplex and autoneg off
153 #define PORT_SERIAL_CONTROL_VALUE ( \
154 MVGBE_FORCE_LINK_PASS | \
155 MVGBE_DIS_AUTO_NEG_FOR_DUPLX | \
156 MVGBE_DIS_AUTO_NEG_FOR_FLOW_CTRL | \
157 MVGBE_ADV_NO_FLOW_CTRL | \
158 MVGBE_FORCE_FC_MODE_NO_PAUSE_DIS_TX | \
159 MVGBE_FORCE_BP_MODE_NO_JAM | \
160 (1 << 9) /* Reserved bit has to be 1 */ | \
161 MVGBE_DO_NOT_FORCE_LINK_FAIL | \
162 MVGBE_DIS_AUTO_NEG_SPEED_GMII | \
164 MVGBE_MIIPHY_MAC_MODE | \
165 MVGBE_AUTO_NEG_NO_CHANGE | \
166 MVGBE_MAX_RX_PACKET_1552BYTE | \
167 MVGBE_CLR_EXT_LOOPBACK | \
168 MVGBE_SET_FULL_DUPLEX_MODE | \
169 MVGBE_DIS_FLOW_CTRL_TX_RX_IN_FULL_DUPLEX |\
170 MVGBE_SET_GMII_SPEED_TO_10_100 |\
171 MVGBE_SET_MII_SPEED_TO_100)
174 #ifdef CONFIG_KM_DISABLE_PCI
175 #undef CONFIG_KIRKWOOD_PCIE_INIT
179 #endif /* _CONFIG_KM_KIRKWOOD */