git.sur5r.net Git - u-boot/blob - include/configs/lacie_kw.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2011 Simon Guinot <sguinot@lacie.com>
   4  */
   5
   6 #ifndef _CONFIG_LACIE_KW_H
   7 #define _CONFIG_LACIE_KW_H
   8
   9 /*
  10  * Machine number definition
  11  */
  12 #if defined(CONFIG_INETSPACE_V2)
  13 #define CONFIG_MACH_TYPE                MACH_TYPE_INETSPACE_V2
  14 #elif defined(CONFIG_NETSPACE_V2)
  15 #define CONFIG_MACH_TYPE                MACH_TYPE_NETSPACE_V2
  16 #elif defined(CONFIG_NETSPACE_LITE_V2)
  17 #define CONFIG_MACH_TYPE                MACH_TYPE_NETSPACE_LITE_V2
  18 #elif defined(CONFIG_NETSPACE_MINI_V2)
  19 #define CONFIG_MACH_TYPE                MACH_TYPE_NETSPACE_MINI_V2
  20 #elif defined(CONFIG_NETSPACE_MAX_V2)
  21 #define CONFIG_MACH_TYPE                MACH_TYPE_NETSPACE_MAX_V2
  22 #elif defined(CONFIG_D2NET_V2)
  23 #define CONFIG_MACH_TYPE                MACH_TYPE_D2NET_V2
  24 #elif defined(CONFIG_NET2BIG_V2)
  25 #define CONFIG_MACH_TYPE                MACH_TYPE_NET2BIG_V2
  26 #else
  27 #error "Unknown board"
  28 #endif
  29
  30 /*
  31  * High Level Configuration Options (easy to change)
  32  */
  33 #define CONFIG_FEROCEON_88FR131         /* CPU Core subversion */
  34 /* SoC name */
  35 #if defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2)
  36 #define CONFIG_KW88F6192
  37 #else
  38 #define CONFIG_KW88F6281
  39 #endif
  40 #define CONFIG_SKIP_LOWLEVEL_INIT       /* disable board lowlevel_init */
  41
  42 /*
  43  * Core clock definition
  44  */
  45 #define CONFIG_SYS_TCLK                 166000000 /* 166MHz */
  46
  47 /*
  48  * SDRAM configuration
  49  */
  50 #define CONFIG_NR_DRAM_BANKS            1
  51
  52 /*
  53  * Different SDRAM configuration and size for some of the boards derived
  54  * from the Network Space v2
  55  */
  56 #if defined(CONFIG_INETSPACE_V2)
  57 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-is2.cfg
  58 #elif defined(CONFIG_NETSPACE_LITE_V2) || defined(CONFIG_NETSPACE_MINI_V2)
  59 #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-ns2l.cfg
  60 #endif
  61
  62 /*
  63  * mv-common.h should be defined after CMD configs since it used them
  64  * to enable certain macros
  65  */
  66 #include "mv-common.h"
  67
  68 /* Remove or override few declarations from mv-common.h */
  69 #undef CONFIG_ENV_SPI_MAX_HZ
  70 #undef CONFIG_SYS_IDE_MAXBUS
  71 #undef CONFIG_SYS_IDE_MAXDEVICE
  72 #define CONFIG_ENV_SPI_MAX_HZ           20000000 /* 20Mhz */
  73
  74 /*
  75  * Enable platform initialisation via misc_init_r() function
  76  */
  77 #define CONFIG_MISC_INIT_R
  78
  79 /*
  80  * Ethernet Driver configuration
  81  */
  82 #ifdef CONFIG_CMD_NET
  83 #define CONFIG_MVGBE_PORTS              {1, 0} /* enable port 0 only */
  84 #define CONFIG_NETCONSOLE
  85 #endif
  86
  87 /*
  88  * SATA Driver configuration
  89  */
  90 #ifdef CONFIG_MVSATA_IDE
  91 #define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
  92 #if defined(CONFIG_NETSPACE_MAX_V2) || defined(CONFIG_D2NET_V2) || \
  93         defined(CONFIG_NET2BIG_V2)
  94 #define CONFIG_SYS_ATA_IDE1_OFFSET      MV_SATA_PORT1_OFFSET
  95 #define CONFIG_SYS_IDE_MAXBUS           2
  96 #define CONFIG_SYS_IDE_MAXDEVICE        2
  97 #else
  98 #define CONFIG_SYS_IDE_MAXBUS           1
  99 #define CONFIG_SYS_IDE_MAXDEVICE        1
 100 #endif
 101 #endif /* CONFIG_MVSATA_IDE */
 102
 103 /*
 104  * Enable GPI0 support
 105  */
 106 #define CONFIG_KIRKWOOD_GPIO
 107
 108 /*
 109  * Enable I2C support
 110  */
 111 #ifdef CONFIG_CMD_I2C
 112 /* I2C EEPROM HT24LC04 (512B - 32 pages of 16 Bytes) */
 113 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
 114 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       4 /* 16-byte page size */
 115 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          1 /* 8-bit device address */
 116 #if defined(CONFIG_NET2BIG_V2)
 117 #define CONFIG_SYS_I2C_G762_ADDR                0x3e
 118 #endif
 119 #endif /* CONFIG_CMD_I2C */
 120
 121 /*
 122  * Partition support
 123  */
 124
 125 /*
 126  * File systems support
 127  */
 128
 129 /*
 130  * Environment variables configurations
 131  */
 132 #define CONFIG_ENV_SECT_SIZE            0x10000 /* 64KB */
 133 #define CONFIG_ENV_SIZE                 0x1000  /* 4KB */
 134 #define CONFIG_ENV_ADDR                 0x70000
 135 #define CONFIG_ENV_OFFSET               0x70000 /* env starts here */
 136
 137 /*
 138  * Default environment variables
 139  */
 140 #define CONFIG_BOOTCOMMAND                                      \
 141         "dhcp && run netconsole; "                              \
 142         "if run usbload || run diskload; then bootm; fi"
 143
 144 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 145         "stdin=serial\0"                                        \
 146         "stdout=serial\0"                                       \
 147         "stderr=serial\0"                                       \
 148         "bootfile=uImage\0"                                     \
 149         "loadaddr=0x800000\0"                                   \
 150         "autoload=no\0"                                         \
 151         "netconsole="                                           \
 152                 "set stdin $stdin,nc; "                         \
 153                 "set stdout $stdout,nc; "                       \
 154                 "set stderr $stderr,nc;\0"                      \
 155         "diskload=ide reset && "                                \
 156                 "ext2load ide 0:1 $loadaddr /boot/$bootfile\0"  \
 157         "usbload=usb start && "                                 \
 158                 "fatload usb 0:1 $loadaddr /boot/$bootfile\0"
 159
 160 #endif /* _CONFIG_LACIE_KW_H */