git.sur5r.net Git - u-boot/blob - include/configs/ma5d4evk.h

   1 /*
   2  * Aries MA5D4 configuration
   3  * Copyright (C) 2015 Marek Vasut <marex@denx.de>
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef __MA5D4EVK_CONFIG_H__
   9 #define __MA5D4EVK_CONFIG_H__
  10
  11 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
  12
  13 #include "at91-sama5_common.h"
  14 #define CONFIG_SYS_USE_SERIALFLASH      1
  15 #define CONFIG_BOARD_LATE_INIT
  16
  17 /* Timer */
  18 #define CONFIG_SYS_TIMER_COUNTER        0xfc06863c
  19
  20 /*
  21  * Memory configurations
  22  */
  23 #define CONFIG_NR_DRAM_BANKS            1
  24 #define CONFIG_SYS_SDRAM_BASE           0x20000000
  25 #define CONFIG_SYS_SDRAM_SIZE           0x10000000
  26
  27 #ifdef CONFIG_SPL_BUILD
  28 #define CONFIG_SYS_INIT_SP_ADDR         0x210000
  29 #else
  30 #define CONFIG_SYS_INIT_SP_ADDR \
  31         (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
  32 #endif
  33
  34 /*
  35  * Environment
  36  */
  37 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
  38 #define CONFIG_SYS_CONSOLE_ENV_OVERWRITE
  39 #define CONFIG_ENV_SIZE                 0x4000
  40 #define CONFIG_SYS_MMC_ENV_DEV          0       /* eMMC */
  41 #define CONFIG_ENV_OFFSET               512     /* just after the MBR */
  42
  43 /*
  44  * U-Boot general configurations
  45  */
  46
  47 /*
  48  * Serial Driver
  49  */
  50 #define CONFIG_ATMEL_USART
  51 #define CONFIG_USART_BASE               0xf802c000
  52 #define CONFIG_USART_ID                 6
  53
  54 /*
  55  * Ethernet
  56  */
  57 #ifdef CONFIG_CMD_NET
  58 #define CONFIG_MACB
  59 #define CONFIG_RMII
  60 #define CONFIG_NET_RETRY_COUNT          20
  61 #define CONFIG_MACB_SEARCH_PHY
  62 #define CONFIG_ARP_TIMEOUT              200UL
  63 #define CONFIG_IP_DEFRAG
  64 #endif
  65
  66 /*
  67  * LCD
  68  */
  69 #ifdef CONFIG_LCD
  70 #define CONFIG_BMP_16BPP
  71 #define CONFIG_BMP_24BPP
  72 #define CONFIG_BMP_32BPP
  73 #define LCD_BPP                         LCD_COLOR16
  74 #define LCD_OUTPUT_BPP                  24
  75 #define CONFIG_ATMEL_HLCD
  76 #endif
  77
  78 /*
  79  * SD/MMC
  80  */
  81 #ifdef CONFIG_CMD_MMC
  82 #define CONFIG_GENERIC_ATMEL_MCI
  83 #endif
  84
  85 /*
  86  * SPI NOR (boot memory)
  87  */
  88 #ifdef CONFIG_CMD_SF
  89 #define CONFIG_ATMEL_SPI
  90 #define CONFIG_ATMEL_SPI0
  91 #define CONFIG_SPI_FLASH_ATMEL
  92 #define CONFIG_SF_DEFAULT_BUS           0
  93 #define CONFIG_SF_DEFAULT_CS            0
  94 #define CONFIG_SF_DEFAULT_SPEED         30000000
  95 #endif
  96
  97 /*
  98  * USB
  99  */
 100 #ifdef CONFIG_CMD_USB
 101
 102 /* USB device */
 103 #define CONFIG_SYS_DFU_DATA_BUF_SIZE    (1 * 1024 * 1024)
 104 #define DFU_DEFAULT_POLL_TIMEOUT        300
 105 #endif
 106
 107 /*
 108  * Boot Linux
 109  */
 110 #define CONFIG_CMDLINE_TAG
 111 #define CONFIG_INITRD_TAG
 112 #define CONFIG_SETUP_MEMORY_TAGS
 113 #define CONFIG_BOOTFILE         "fitImage"
 114 #define CONFIG_LOADADDR         0x20800000
 115 #define CONFIG_BOOTCOMMAND      "run mmc_mmc"
 116 #define CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
 117
 118 /*
 119  * Extra Environments
 120  */
 121 #define CONFIG_PREBOOT          "run try_bootscript"
 122 #define CONFIG_HOSTNAME         ma5d4evk
 123
 124 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 125         "consdev=ttyS3\0"                                               \
 126         "baudrate=115200\0"                                             \
 127         "bootscript=boot.scr\0"                                         \
 128         "bootdev=/dev/mmcblk0p1\0"                                      \
 129         "bootpart=0:1\0"                                                \
 130         "rootdev=/dev/mmcblk0p2\0"                                      \
 131         "netdev=eth0\0"                                                 \
 132         "dfu_alt_info=mmc raw 0 3867148288\0"                           \
 133         "kernel_addr_r=0x22000000\0"                                    \
 134         "update_spi_firmware_spl_addr=0x21000000\0"                     \
 135         "update_spi_firmware_spl_filename=boot.bin\0"                   \
 136         "update_spi_firmware_addr=0x22000000\0"                         \
 137         "update_spi_firmware_filename=u-boot.img\0"                     \
 138         "update_spi_firmware="  /* Update the SPI flash firmware */     \
 139                 "if sf probe ; then "                                   \
 140                 "if tftp ${update_spi_firmware_spl_addr} "              \
 141                         "${update_spi_firmware_spl_filename} ; then "   \
 142                 "setenv update_spi_firmware_spl_filesize ${filesize} ; "\
 143                 "if tftp ${update_spi_firmware_addr} "                  \
 144                         "${update_spi_firmware_filename} ; then "       \
 145                 "setenv update_spi_firmware_filesize ${filesize} ; "    \
 146                 "sf update ${update_spi_firmware_spl_addr} 0x0 "        \
 147                         "${update_spi_firmware_spl_filesize} ; "        \
 148                 "sf update ${update_spi_firmware_addr} 0x10000 "        \
 149                         "${update_spi_firmware_filesize} ; "            \
 150                 "fi ; "                                                 \
 151                 "fi ; "                                                 \
 152                 "fi\0"                                                  \
 153         "addcons="                                                      \
 154                 "setenv bootargs ${bootargs} "                          \
 155                 "console=${consdev},${baudrate}\0"                      \
 156         "addip="                                                        \
 157                 "setenv bootargs ${bootargs} "                          \
 158                 "ip=${ipaddr}:${serverip}:${gatewayip}:"                \
 159                         "${netmask}:${hostname}:${netdev}:off\0"        \
 160         "addmisc="                                                      \
 161                 "setenv bootargs ${bootargs} ${miscargs}\0"             \
 162         "addargs=run addcons addmisc\0"                                 \
 163         "mmcload="                                                      \
 164                 "mmc rescan ; "                                         \
 165                 "load mmc ${bootpart} ${kernel_addr_r} ${bootfile}\0"   \
 166         "netload="                                                      \
 167                 "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"       \
 168         "miscargs=nohlt panic=1\0"                                      \
 169         "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"         \
 170         "nfsargs="                                                      \
 171                 "setenv bootargs root=/dev/nfs rw "                     \
 172                         "nfsroot=${serverip}:${rootpath},v3,tcp\0"      \
 173         "fdtimg=if test ${bootmode} = \"sf\" ; then "                   \
 174                         "setenv kernel_fdt 1 ; "                        \
 175                 "else ; "                                               \
 176                         "setenv kernel_fdt 2 ; "                        \
 177                 "fi\0"                                                  \
 178         "mmc_mmc="                                                      \
 179                 "run fdtimg mmcload mmcargs addargs ; "                 \
 180                 "bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
 181         "mmc_nfs="                                                      \
 182                 "run fdtimg mmcload nfsargs addip addargs ; "                   \
 183                 "bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
 184         "net_mmc="                                                      \
 185                 "run fdtimg netload mmcargs addargs ; "                 \
 186                 "bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
 187         "net_nfs="                                                      \
 188                 "run fdtimg netload nfsargs addip addargs ; "                   \
 189                 "bootm ${kernel_addr_r}:kernel@1 - ${kernel_addr_r}:fdt@${kernel_fdt}\0" \
 190         "try_bootscript="                                               \
 191                 "mmc rescan;"                                           \
 192                 "if test -e mmc 1:1 ${bootscript} ; then "              \
 193                 "if load mmc 1:1 ${kernel_addr_r} ${bootscript};"       \
 194                 "then ; "                                               \
 195                         "echo Running bootscript... ; "                 \
 196                         "source ${kernel_addr_r} ; "                    \
 197                 "fi ; "                                                 \
 198                 "fi\0"
 199 /* SPL */
 200 #define CONFIG_SPL_TEXT_BASE            0x200000
 201 #define CONFIG_SPL_MAX_SIZE             0x10000
 202 #define CONFIG_SPL_BSS_START_ADDR       0x20000000
 203 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
 204 #define CONFIG_SYS_SPL_MALLOC_START     0x20080000
 205 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x80000
 206
 207 #define CONFIG_SYS_MONITOR_LEN          (512 << 10)
 208
 209 #define CONFIG_SPL_SPI_LOAD
 210 #define CONFIG_SYS_SPI_U_BOOT_OFFS      0x10000
 211
 212 #define CONFIG_SYS_USE_MMC
 213 #define CONFIG_SPL_MMC_SUPPORT
 214 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
 215 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
 216 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME         "u-boot.img"
 217 #define CONFIG_SPL_FAT_SUPPORT
 218 #define CONFIG_SPL_LIBDISK_SUPPORT
 219
 220 #endif  /* __MA5D4EVK_CONFIG_H__ */