git.sur5r.net Git - u-boot/blob - include/configs/mx6qarm2.h

   1 /*
   2  * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale i.MX6Q Armadillo2 board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include "mx6_common.h"
  13
  14 /* Size of malloc() pool */
  15 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
  16
  17 #define CONFIG_BOARD_EARLY_INIT_F
  18 #define CONFIG_MXC_GPIO
  19
  20 #define CONFIG_MXC_UART
  21 #define CONFIG_MXC_UART_BASE            UART4_BASE
  22
  23 /* MMC Configs */
  24 #define CONFIG_FSL_ESDHC
  25 #define CONFIG_FSL_USDHC
  26 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC4_BASE_ADDR
  27 #define CONFIG_SYS_FSL_USDHC_NUM        2
  28
  29 #define CONFIG_MMC
  30 #define CONFIG_CMD_MMC
  31 #define CONFIG_GENERIC_MMC
  32 #define CONFIG_BOUNCE_BUFFER
  33 #define CONFIG_CMD_FAT
  34 #define CONFIG_DOS_PARTITION
  35
  36 #define CONFIG_CMD_PING
  37 #define CONFIG_CMD_DHCP
  38 #define CONFIG_CMD_MII
  39 #define CONFIG_CMD_NET
  40 #define CONFIG_FEC_MXC
  41 #define CONFIG_MII
  42 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  43 #define CONFIG_FEC_XCV_TYPE             RGMII
  44 #define CONFIG_FEC_MXC_PHYADDR          0
  45
  46 /* allow to overwrite serial and ethaddr */
  47 #define CONFIG_ENV_OVERWRITE
  48 #define CONFIG_CONS_INDEX               1
  49 #define CONFIG_BAUDRATE                 115200
  50
  51 /* Command definition */
  52
  53 #define CONFIG_BOOTDELAY                3
  54
  55 #define CONFIG_LOADADDR                 0x12000000
  56 #define CONFIG_SYS_TEXT_BASE            0x17800000
  57
  58 #define CONFIG_EXTRA_ENV_SETTINGS \
  59         "script=boot.scr\0" \
  60         "image=zImage\0" \
  61         "console=ttymxc3\0" \
  62         "fdt_file=imx6q-arm2.dtb\0" \
  63         "fdt_addr=0x18000000\0" \
  64         "fdt_high=0xffffffff\0" \
  65         "initrd_high=0xffffffff\0" \
  66         "boot_fdt=try\0" \
  67         "ip_dyn=yes\0" \
  68         "mmcdev=1\0" \
  69         "mmcpart=1\0" \
  70         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
  71         "mmcargs=setenv bootargs console=${console},${baudrate} " \
  72                 "root=${mmcroot}\0" \
  73         "loadbootscript=" \
  74                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
  75         "bootscript=echo Running bootscript from mmc ...; " \
  76                 "source\0" \
  77         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
  78         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
  79         "mmcboot=echo Booting from mmc ...; " \
  80                 "run mmcargs; " \
  81                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
  82                         "if run loadfdt; then " \
  83                                 "bootz ${loadaddr} - ${fdt_addr}; " \
  84                         "else " \
  85                                 "if test ${boot_fdt} = try; then " \
  86                                         "bootz; " \
  87                                 "else " \
  88                                         "echo WARN: Cannot load the DT; " \
  89                                 "fi; " \
  90                         "fi; " \
  91                 "else " \
  92                         "bootz; " \
  93                 "fi;\0" \
  94         "netargs=setenv bootargs console=${console},${baudrate} " \
  95                 "root=/dev/nfs " \
  96                 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
  97         "netboot=echo Booting from net ...; " \
  98                 "run netargs; " \
  99                 "if test ${ip_dyn} = yes; then " \
 100                         "setenv get_cmd dhcp; " \
 101                 "else " \
 102                         "setenv get_cmd tftp; " \
 103                 "fi; " \
 104                 "${get_cmd} ${image}; " \
 105                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 106                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 107                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 108                         "else " \
 109                                 "if test ${boot_fdt} = try; then " \
 110                                         "bootz; " \
 111                                 "else " \
 112                                         "echo WARN: Cannot load the DT; " \
 113                                 "fi; " \
 114                         "fi; " \
 115                 "else " \
 116                         "bootz; " \
 117                 "fi;\0"
 118
 119 #define CONFIG_BOOTCOMMAND \
 120         "mmc dev ${mmcdev};" \
 121         "mmc dev ${mmcdev}; if mmc rescan; then " \
 122                 "if run loadbootscript; then " \
 123                         "run bootscript; " \
 124                 "else " \
 125                         "if run loadimage; then " \
 126                                 "run mmcboot; " \
 127                         "else run netboot; " \
 128                         "fi; " \
 129                 "fi; " \
 130         "else run netboot; fi"
 131
 132 #define CONFIG_ARP_TIMEOUT      200UL
 133
 134 /* Miscellaneous configurable options */
 135 #define CONFIG_SYS_LONGHELP
 136 #define CONFIG_SYS_HUSH_PARSER
 137 #define CONFIG_AUTO_COMPLETE
 138 #define CONFIG_SYS_CBSIZE               256
 139
 140 #define CONFIG_SYS_MAXARGS              16
 141 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
 142
 143 #define CONFIG_SYS_MEMTEST_START        0x10000000
 144 #define CONFIG_SYS_MEMTEST_END          0x10010000
 145
 146 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
 147
 148 #define CONFIG_CMDLINE_EDITING
 149
 150 /* Physical Memory Map */
 151 #define CONFIG_NR_DRAM_BANKS            1
 152 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
 153
 154 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 155 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 156 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 157
 158 #define CONFIG_SYS_INIT_SP_OFFSET \
 159         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 160 #define CONFIG_SYS_INIT_SP_ADDR \
 161         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 162
 163 /* Environment organization */
 164 #define CONFIG_ENV_OFFSET               (6 * 64 * 1024)
 165 #define CONFIG_ENV_SIZE                 (8 * 1024)
 166 #define CONFIG_ENV_IS_IN_MMC
 167 #define CONFIG_SYS_MMC_ENV_DEV          1
 168
 169 #define CONFIG_OF_LIBFDT
 170 #define CONFIG_CMD_BOOTZ
 171
 172 /* USB Configs */
 173 #define CONFIG_CMD_USB
 174 #ifdef CONFIG_CMD_USB
 175 #define CONFIG_USB_EHCI
 176 #define CONFIG_USB_EHCI_MX6
 177 #define CONFIG_USB_STORAGE
 178 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 179 #define CONFIG_USB_HOST_ETHER
 180 #define CONFIG_USB_ETHER_ASIX
 181 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 182 #define CONFIG_MXC_USB_FLAGS            0
 183 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1
 184 #endif
 185
 186 #endif                          /* __CONFIG_H */