2 * (C) Copyright 2011-2012
3 * Pali Rohár <pali.rohar@gmail.com>
6 * Alistair Buxton <a.j.buxton@gmail.com>
8 * Derived from Beagle Board code:
9 * (C) Copyright 2006-2008
11 * Richard Woodruff <r-woodruff2@ti.com>
12 * Syed Mohammed Khasim <x0khasim@ti.com>
14 * Configuration settings for the Nokia RX-51 aka N900.
16 * SPDX-License-Identifier: GPL-2.0+
23 * High Level Configuration Options
26 #define CONFIG_OMAP /* in a TI OMAP core */
27 #define CONFIG_OMAP3430 /* which is in a 3430 */
28 #define CONFIG_OMAP3_RX51 /* working with RX51 */
29 #define CONFIG_SYS_L2CACHE_OFF /* pretend there is no L2 CACHE */
31 #define CONFIG_MACH_TYPE MACH_TYPE_NOKIA_RX51
34 * Nokia X-Loader loading secondary image to address 0x80400000
35 * NOLO loading boot image to random place, so it doesn't really
36 * matter what we set this to. We have to copy u-boot to this address
38 #define CONFIG_SYS_TEXT_BASE 0x80008000
40 #define CONFIG_SDRC /* The chip has SDRC controller */
42 #include <asm/arch/cpu.h> /* get chip and board defs */
43 #include <asm/arch/omap.h>
44 #include <asm/arch/mem.h>
45 #include <linux/stringify.h>
48 #define V_OSCK 26000000 /* Clock output from T2 */
49 #define V_SCLK (V_OSCK >> 1)
51 #undef CONFIG_USE_IRQ /* no support for IRQs */
52 #define CONFIG_MISC_INIT_R
53 #define CONFIG_SKIP_LOWLEVEL_INIT /* X-Loader set everything up */
55 #define CONFIG_CMDLINE_TAG /* enable passing kernel command line string */
56 #define CONFIG_INITRD_TAG /* enable passing initrd */
57 #define CONFIG_REVISION_TAG /* enable passing revision tag*/
58 #define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */
61 * Size of malloc() pool
63 #define CONFIG_ENV_SIZE (128 << 10)
64 #define CONFIG_UBI_SIZE (512 << 10)
65 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + CONFIG_UBI_SIZE + \
73 * NS16550 Configuration
75 #define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
77 #define CONFIG_SYS_NS16550_SERIAL
78 #define CONFIG_SYS_NS16550_REG_SIZE (-4)
79 #define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
82 * select serial console configuration
84 #define CONFIG_CONS_INDEX 3
85 #define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
86 #define CONFIG_SERIAL3 3 /* UART3 on RX-51 */
88 /* allow to overwrite serial and ethaddr */
89 #define CONFIG_ENV_OVERWRITE
90 #define CONFIG_BAUDRATE 115200
91 #define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 }
94 #define CONFIG_USB_MUSB_UDC
95 #define CONFIG_USB_MUSB_HCD
96 #define CONFIG_USB_OMAP3
97 #define CONFIG_TWL4030_USB
99 /* USB device configuration */
100 #define CONFIG_USB_DEVICE
101 #define CONFIG_USBD_VENDORID 0x0421
102 #define CONFIG_USBD_PRODUCTID 0x01c8
103 #define CONFIG_USBD_MANUFACTURER "Nokia"
104 #define CONFIG_USBD_PRODUCT_NAME "N900"
106 /* commands to include */
108 #define CONFIG_CMDLINE_EDITING /* add command line history */
109 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */
111 #define CONFIG_CMD_CLEAR /* ANSI terminal clear screen command */
113 #ifdef ONENAND_SUPPORT
115 #define CONFIG_CMD_ONENAND /* ONENAND support */
116 #define CONFIG_CMD_MTDPARTS /* mtd parts support */
119 #define CONFIG_CMD_UBIFS /* UBIFS Support */
124 #define CONFIG_OMAP3_SPI
125 #define CONFIG_SYS_I2C
126 #define CONFIG_SYS_OMAP24_I2C_SPEED 100000
127 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1
128 #define CONFIG_SYS_I2C_OMAP34XX
133 #define CONFIG_TWL4030_POWER
134 #define CONFIG_TWL4030_LED
135 #define CONFIG_TWL4030_KEYPAD
137 #define CONFIG_OMAP_GPIO
138 #define GPIO_SLIDE 71
141 * Board ONENAND Info.
144 #define PART1_NAME "bootloader"
145 #define PART1_SIZE 128
146 #define PART1_MULL 1024
147 #define PART1_SUFF "k"
148 #define PART1_OFFS 0x00000000
149 #define PART1_MASK 0x00000003
151 #define PART2_NAME "config"
152 #define PART2_SIZE 384
153 #define PART2_MULL 1024
154 #define PART2_SUFF "k"
155 #define PART2_OFFS 0x00020000
156 #define PART2_MASK 0x00000000
158 #define PART3_NAME "log"
159 #define PART3_SIZE 256
160 #define PART3_MULL 1024
161 #define PART3_SUFF "k"
162 #define PART3_OFFS 0x00080000
163 #define PART3_MASK 0x00000000
165 #define PART4_NAME "kernel"
167 #define PART4_MULL 1024*1024
168 #define PART4_SUFF "m"
169 #define PART4_OFFS 0x000c0000
170 #define PART4_MASK 0x00000000
172 #define PART5_NAME "initfs"
174 #define PART5_MULL 1024*1024
175 #define PART5_SUFF "m"
176 #define PART5_OFFS 0x002c0000
177 #define PART5_MASK 0x00000000
179 #define PART6_NAME "rootfs"
180 #define PART6_SIZE 257280
181 #define PART6_MULL 1024
182 #define PART6_SUFF "k"
183 #define PART6_OFFS 0x004c0000
184 #define PART6_MASK 0x00000000
186 #ifdef ONENAND_SUPPORT
188 #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
189 #define CONFIG_MTD_DEVICE
190 #define CONFIG_MTD_PARTITIONS
193 #define CONFIG_RBTREE
197 #define MTDIDS_DEFAULT "onenand0=onenand"
198 #define MTDPARTS_DEFAULT "mtdparts=onenand:" \
199 __stringify(PART1_SIZE) PART1_SUFF "(" PART1_NAME ")ro," \
200 __stringify(PART2_SIZE) PART2_SUFF "(" PART2_NAME ")," \
201 __stringify(PART3_SIZE) PART3_SUFF "(" PART3_NAME ")," \
202 __stringify(PART4_SIZE) PART4_SUFF "(" PART4_NAME ")," \
203 __stringify(PART5_SIZE) PART5_SUFF "(" PART5_NAME ")," \
208 /* Watchdog support */
209 #define CONFIG_HW_WATCHDOG
215 #define CONFIG_VIDEO_LOGO
216 #define VIDEO_FB_16BPP_PIXEL_SWAP
217 #define VIDEO_FB_16BPP_WORD_SWAP
218 #define CONFIG_SPLASH_SCREEN
220 /* functions for cfb_console */
221 #define VIDEO_KBD_INIT_FCT rx51_kp_init()
222 #define VIDEO_TSTC_FCT rx51_kp_tstc
223 #define VIDEO_GETC_FCT rx51_kp_getc
226 int rx51_kp_init(void);
227 int rx51_kp_tstc(struct stdio_dev *sdev);
228 int rx51_kp_getc(struct stdio_dev *sdev);
231 #ifndef MTDPARTS_DEFAULT
232 #define MTDPARTS_DEFAULT
235 /* Environment information */
236 #define CONFIG_EXTRA_ENV_SETTINGS \
237 "mtdparts=" MTDPARTS_DEFAULT "\0" \
242 "setcon=setenv stdin ${con};" \
243 "setenv stdout ${con};" \
244 "setenv stderr ${con}\0" \
245 "sercon=setenv con serial; run setcon\0" \
246 "usbcon=setenv con usbtty; run setcon\0" \
247 "vgacon=setenv con vga; run setcon\0" \
248 "slide=gpio input " __stringify(GPIO_SLIDE) "\0" \
249 "switchmmc=mmc dev ${mmcnum}\0" \
250 "kernaddr=0x82008000\0" \
251 "initrdaddr=0x84008000\0" \
252 "scriptaddr=0x86008000\0" \
253 "fileload=${mmctype}load mmc ${mmcnum}:${mmcpart} " \
254 "${loadaddr} ${mmcfile}\0" \
255 "kernload=setenv loadaddr ${kernaddr};" \
256 "setenv mmcfile ${mmckernfile};" \
258 "initrdload=setenv loadaddr ${initrdaddr};" \
259 "setenv mmcfile ${mmcinitrdfile};" \
261 "scriptload=setenv loadaddr ${scriptaddr};" \
262 "setenv mmcfile ${mmcscriptfile};" \
264 "scriptboot=echo Running ${mmcscriptfile} from mmc " \
265 "${mmcnum}:${mmcpart} ...; source ${scriptaddr}\0" \
266 "kernboot=echo Booting ${mmckernfile} from mmc " \
267 "${mmcnum}:${mmcpart} ...; bootm ${kernaddr}\0" \
268 "kerninitrdboot=echo Booting ${mmckernfile} ${mmcinitrdfile} from mmc "\
269 "${mmcnum}:${mmcpart} ...; bootm ${kernaddr} ${initrdaddr}\0" \
270 "attachboot=echo Booting attached kernel image ...;" \
271 "setenv setup_omap_atag 1;" \
272 "bootm ${attkernaddr};" \
273 "setenv setup_omap_atag\0" \
274 "trymmcscriptboot=if run switchmmc; then " \
275 "if run scriptload; then " \
279 "trymmckernboot=if run switchmmc; then " \
280 "if run kernload; then " \
284 "trymmckerninitrdboot=if run switchmmc; then " \
285 "if run initrdload; then " \
286 "if run kernload; then " \
287 "run kerninitrdboot;" \
291 "trymmcpartboot=setenv mmcscriptfile boot.scr; run trymmcscriptboot;" \
292 "setenv mmckernfile uImage; run trymmckernboot\0" \
293 "trymmcallpartboot=setenv mmcpart 1; run trymmcpartboot;" \
294 "setenv mmcpart 2; run trymmcpartboot;" \
295 "setenv mmcpart 3; run trymmcpartboot;" \
296 "setenv mmcpart 4; run trymmcpartboot\0" \
297 "trymmcboot=if run switchmmc; then " \
298 "setenv mmctype fat;" \
299 "run trymmcallpartboot;" \
300 "setenv mmctype ext2;" \
301 "run trymmcallpartboot;" \
302 "setenv mmctype ext4;" \
303 "run trymmcallpartboot;" \
305 "emmcboot=setenv mmcnum 1; run trymmcboot\0" \
306 "sdboot=setenv mmcnum 0; run trymmcboot\0" \
307 "menucmd=bootmenu\0" \
308 "bootmenu_0=Attached kernel=run attachboot\0" \
309 "bootmenu_1=Internal eMMC=run emmcboot\0" \
310 "bootmenu_2=External SD card=run sdboot\0" \
311 "bootmenu_3=U-Boot boot order=boot\0" \
312 "bootmenu_delay=30\0" \
315 #define CONFIG_PREBOOT \
316 "setenv mmcnum 1; setenv mmcpart 1;" \
317 "setenv mmcscriptfile bootmenu.scr;" \
318 "if run switchmmc; then " \
319 "setenv mmcdone true;" \
320 "setenv mmctype fat;" \
321 "if run scriptload; then true; else " \
322 "setenv mmctype ext2;" \
323 "if run scriptload; then true; else " \
324 "setenv mmctype ext4;" \
325 "if run scriptload; then true; else " \
326 "setenv mmcdone false;" \
330 "if ${mmcdone}; then " \
334 "if run slide; then true; else " \
335 "setenv bootmenu_delay 0;" \
336 "setenv bootdelay 0;" \
339 #define CONFIG_POSTBOOTMENU \
341 "echo Extra commands:;" \
342 "echo run sercon - Use serial port for control.;" \
343 "echo run usbcon - Use usbtty for control.;" \
344 "echo run vgacon - Use framebuffer/keyboard.;" \
345 "echo run sdboot - Boot from SD card slot.;" \
346 "echo run emmcboot - Boot internal eMMC memory.;" \
347 "echo run attachboot - Boot attached kernel image.;" \
350 #define CONFIG_BOOTCOMMAND \
356 #define CONFIG_MENU_SHOW
359 * Miscellaneous configurable options
361 #define CONFIG_SYS_LONGHELP /* undef to save memory */
362 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
363 /* Print Buffer Size */
364 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
365 sizeof(CONFIG_SYS_PROMPT) + 16)
366 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
367 /* Boot Argument Buffer Size */
368 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
370 #define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)
371 #define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + 0x01F00000)/*31MB*/
373 /* default load address */
374 #define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0)
377 * OMAP3 has 12 GP timers, they can be driven by the system clock
378 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
379 * This rate is divided by a local divisor.
381 #define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
382 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
387 * The stack sizes are set up in start.S using the settings below
389 #define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
392 * Physical Memory Map
394 #define CONFIG_NR_DRAM_BANKS 2
395 #define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
398 * FLASH and environment organization
401 #define CONFIG_ENV_IS_NOWHERE
403 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
404 #define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
405 #define CONFIG_SYS_INIT_RAM_SIZE 0x800
406 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
407 CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
410 * Attached kernel image
413 #define SDRAM_SIZE 0x10000000 /* 256 MB */
414 #define SDRAM_END (CONFIG_SYS_SDRAM_BASE + SDRAM_SIZE)
416 #define IMAGE_MAXSIZE 0x1FF800 /* 2 MB - 2 kB */
417 #define KERNEL_OFFSET 0x40000 /* 256 kB */
418 #define KERNEL_MAXSIZE (IMAGE_MAXSIZE-KERNEL_OFFSET)
419 #define KERNEL_ADDRESS (SDRAM_END-KERNEL_MAXSIZE)
421 /* Reserve protected RAM for attached kernel */
422 #define CONFIG_PRAM ((KERNEL_MAXSIZE >> 10)+1)
424 #endif /* __CONFIG_H */