2 * Configuration settings for the Novena U-Boot.
4 * Copyright (C) 2014 Marek Vasut <marex@denx.de>
6 * SPDX-License-Identifier: GPL-2.0+
12 /* System configurations */
13 #define CONFIG_MISC_INIT_R
14 #define CONFIG_KEYBOARD
16 #include <config_distro_defaults.h>
17 #include "mx6_common.h"
20 #define CONFIG_CMD_PCI
22 /* U-Boot general configurations */
24 /* U-Boot environment */
25 #define CONFIG_ENV_SIZE (16 * 1024)
27 * Environment is on MMC, starting at offset 512KiB from start of the card.
28 * Please place first partition at offset 1MiB from the start of the card
29 * as recommended by GNU/fdisk. See below for details:
30 * http://homepage.ntlworld.com./jonathan.deboynepollard/FGA/disc-partition-alignment.html
33 #define CONFIG_SYS_MMC_ENV_DEV 0
34 #define CONFIG_ENV_OFFSET (512 * 1024)
35 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
36 #define CONFIG_ENV_OFFSET_REDUND \
37 (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
41 #define CONFIG_BOOTFILE "fitImage"
42 #define CONFIG_BOOTARGS "console=ttymxc1,115200 "
43 #define CONFIG_BOOTCOMMAND "run distro_bootcmd ; run net_nfs"
44 #define CONFIG_HOSTNAME novena
46 /* Physical Memory Map */
47 #define CONFIG_NR_DRAM_BANKS 1
48 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
50 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
51 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
52 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
54 #define CONFIG_SYS_INIT_SP_OFFSET \
55 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
56 #define CONFIG_SYS_INIT_SP_ADDR \
57 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
59 #define CONFIG_SYS_MEMTEST_START 0x10000000
60 #define CONFIG_SYS_MEMTEST_END 0x20000000
62 #define CONFIG_SYS_MALLOC_LEN (64 * 1024 * 1024)
65 #include "imx6_spl.h" /* common IMX6 SPL configuration */
67 /* Ethernet Configuration */
69 #define CONFIG_FEC_MXC
71 #define IMX_FEC_BASE ENET_BASE_ADDR
72 #define CONFIG_FEC_XCV_TYPE RGMII
73 #define CONFIG_ETHPRIME "FEC"
74 #define CONFIG_FEC_MXC_PHYADDR 0x7
75 #define CONFIG_PHY_MICREL
76 #define CONFIG_PHY_MICREL_KSZ90X1
77 #define CONFIG_ARP_TIMEOUT 200UL
81 #define CONFIG_SYS_I2C
82 #define CONFIG_SYS_I2C_MXC
83 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
84 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
85 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
86 #define CONFIG_I2C_MULTI_BUS
87 #define CONFIG_I2C_MXC
88 #define CONFIG_SYS_I2C_SPEED 100000
89 #define CONFIG_SYS_SPD_BUS_NUM 0
92 #ifdef CONFIG_CMD_EEPROM
93 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
94 #define CONFIG_SYS_I2C_EEPROM_BUS 2
98 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
99 #define CONFIG_SYS_FSL_USDHC_NUM 2
102 #ifdef CONFIG_CMD_PCI
103 #define CONFIG_PCI_SCAN_SHOW
104 #define CONFIG_PCIE_IMX
105 #define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(3, 29)
106 #define CONFIG_PCIE_IMX_POWER_GPIO IMX_GPIO_NR(7, 12)
111 #define CONFIG_POWER_I2C
112 #define CONFIG_POWER_PFUZE100
113 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
116 #ifdef CONFIG_CMD_SATA
117 #define CONFIG_DWC_AHSATA
118 #define CONFIG_SYS_SATA_MAX_DEVICE 1
119 #define CONFIG_DWC_AHSATA_PORT_ID 0
120 #define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
122 #define CONFIG_LIBATA
126 #define CONFIG_MXC_UART
127 #define CONFIG_MXC_UART_BASE UART2_BASE
130 #ifdef CONFIG_CMD_USB
131 #define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
132 #define CONFIG_USB_HOST_ETHER
133 #define CONFIG_USB_ETHER_ASIX
134 #define CONFIG_USB_ETHER_SMSC95XX
135 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
136 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
137 #define CONFIG_MXC_USB_FLAGS 0
139 #define CONFIG_USBD_HS
140 #define CONFIG_USB_ETHER
141 #define CONFIG_USB_ETH_CDC
142 #define CONFIG_NETCONSOLE
147 #define CONFIG_VIDEO_IPUV3
148 #define CONFIG_VIDEO_BMP_RLE8
149 #define CONFIG_SPLASH_SCREEN
150 #define CONFIG_BMP_16BPP
151 #define CONFIG_VIDEO_LOGO
152 #define CONFIG_IPUV3_CLK 260000000
153 #define CONFIG_IMX_HDMI
154 #define CONFIG_IMX_VIDEO_SKIP
157 /* Extra U-Boot environment. */
158 #ifndef CONFIG_SPL_BUILD
159 #define CONFIG_EXTRA_ENV_SETTINGS \
160 "fdt_high=0xffffffff\0" \
161 "initrd_high=0xffffffff\0" \
162 "consdev=ttymxc1\0" \
163 "baudrate=115200\0" \
164 "bootdev=/dev/mmcblk0p1\0" \
165 "rootdev=/dev/mmcblk0p2\0" \
167 "kernel_addr_r="__stringify(CONFIG_LOADADDR)"\0" \
168 "pxefile_addr_r="__stringify(CONFIG_LOADADDR)"\0" \
169 "scriptaddr="__stringify(CONFIG_LOADADDR)"\0" \
170 "ramdisk_addr_r=0x28000000\0" \
171 "fdt_addr_r=0x18000000\0" \
172 "fdtfile=imx6q-novena.dtb\0" \
174 "setenv bootargs ${bootargs} " \
175 "console=${consdev},${baudrate}\0" \
177 "setenv bootargs ${bootargs} " \
178 "ip=${ipaddr}:${serverip}:${gatewayip}:" \
179 "${netmask}:${hostname}:${netdev}:off\0" \
181 "setenv bootargs ${bootargs} ${miscargs}\0" \
182 "addargs=run addcons addmisc\0" \
185 "ext4load mmc 0:1 ${kernel_addr_r} ${bootfile}\0" \
187 "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \
188 "miscargs=nohlt panic=1\0" \
189 "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \
191 "setenv bootargs root=/dev/nfs rw " \
192 "nfsroot=${serverip}:${rootpath},v3,tcp\0" \
194 "run mmcload mmcargs addargs ; " \
195 "bootm ${kernel_addr_r}\0" \
197 "run mmcload nfsargs addip addargs ; " \
198 "bootm ${kernel_addr_r}\0" \
200 "run netload mmcargs addargs ; " \
201 "bootm ${kernel_addr_r}\0" \
203 "run netload nfsargs addip addargs ; " \
204 "bootm ${kernel_addr_r}\0" \
205 "update_sd_spl_filename=SPL\0" \
206 "update_sd_uboot_filename=u-boot.img\0" \
207 "update_sd_firmware=" /* Update the SD firmware partition */ \
208 "if mmc rescan ; then " \
209 "if dhcp ${update_sd_spl_filename} ; then " \
210 "mmc write ${loadaddr} 2 0x200 ; " \
212 "if dhcp ${update_sd_uboot_filename} ; then " \
213 "fatwrite mmc 0:1 ${loadaddr} u-boot.img ${filesize} ; "\
218 #define BOOT_TARGET_DEVICES(func) \
221 func(SATA, sata, 0) \
225 #include <config_distro_bootcmd.h>
228 #define CONFIG_EXTRA_ENV_SETTINGS
229 #endif /* CONFIG_SPL_BUILD */
231 #endif /* __CONFIG_H */