2 * Common configuration settings for IGEP technology based boards
5 * ISEE 2007 SL, <www.iseebcn.com>
7 * SPDX-License-Identifier: GPL-2.0+
13 #define CONFIG_NR_DRAM_BANKS 2
16 #include <configs/ti_omap3_common.h>
17 #include <asm/mach-types.h>
20 * We are only ever GP parts and will utilize all of the "downloaded image"
21 * area in SRAM which starts at 0x40200000 and ends at 0x4020FFFF (64KB).
23 #undef CONFIG_SPL_TEXT_BASE
24 #define CONFIG_SPL_TEXT_BASE 0x40200000
27 * Display CPU and Board information
29 #define CONFIG_DISPLAY_BOARDINFO 1
31 #define CONFIG_MISC_INIT_R
33 #define CONFIG_REVISION_TAG 1
35 /* Status LED available for IGEP0020 and IGEP0030 but not IGEP0032 */
36 #if (CONFIG_MACH_TYPE != MACH_TYPE_IGEP0032)
37 #define CONFIG_STATUS_LED
38 #define CONFIG_BOARD_SPECIFIC_LED
39 #define CONFIG_GPIO_LED
40 #if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020)
41 #define RED_LED_GPIO 27
42 #elif (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
43 #define RED_LED_GPIO 16
45 #error "status LED not defined for this machine."
48 #define STATUS_LED_BIT RED_LED_GPIO
49 #define STATUS_LED_STATE STATUS_LED_ON
50 #define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
51 #define STATUS_LED_BOOT RED_LED_DEV
55 #define CONFIG_OMAP3_GPIO_3 /* GPIO64 .. 95 is in GPIO bank 3 */
56 #define CONFIG_OMAP3_GPIO_5 /* GPIO128..159 is in GPIO bank 5 */
57 #define CONFIG_OMAP3_GPIO_6 /* GPIO160..191 is in GPIO bank 6 */
60 #define CONFIG_USB_MUSB_UDC 1
61 #define CONFIG_USB_OMAP3 1
62 #define CONFIG_TWL4030_USB 1
64 /* USB device configuration */
65 #define CONFIG_USB_DEVICE 1
66 #define CONFIG_USB_TTY 1
67 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
69 /* Change these to suit your needs */
70 #define CONFIG_USBD_VENDORID 0x0451
71 #define CONFIG_USBD_PRODUCTID 0x5678
72 #define CONFIG_USBD_MANUFACTURER "Texas Instruments"
73 #define CONFIG_USBD_PRODUCT_NAME "IGEP"
75 #define CONFIG_CMD_MTDPARTS
76 #define CONFIG_CMD_ONENAND
78 #ifndef CONFIG_SPL_BUILD
81 #define ENV_DEVICE_SETTINGS \
86 #define MEM_LAYOUT_SETTINGS \
87 DEFAULT_LINUX_BOOT_ENV \
88 "scriptaddr=0x87E00000\0" \
89 "pxefile_addr_r=0x87F00000\0"
91 #define BOOT_TARGET_DEVICES(func) \
94 #include <config_distro_bootcmd.h>
96 #define CONFIG_EXTRA_ENV_SETTINGS \
106 #if defined(CONFIG_CMD_NET)
107 #define CONFIG_SMC911X
108 #define CONFIG_SMC911X_32_BIT
109 #define CONFIG_SMC911X_BASE 0x2C000000
110 #endif /* (CONFIG_CMD_NET) */
112 #define CONFIG_RBTREE
113 #define CONFIG_MTD_PARTITIONS
114 #define CONFIG_SYS_MTDPARTS_RUNTIME
117 #define CONFIG_USE_ONENAND_BOARD_INIT
118 #define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
119 #define CONFIG_SYS_ONENAND_BLOCK_SIZE (128*1024)
122 #define CONFIG_SPL_OMAP3_ID_NAND
123 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
124 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
125 #define CONFIG_SYS_NAND_PAGE_COUNT 64
126 #define CONFIG_SYS_NAND_PAGE_SIZE 2048
127 #define CONFIG_SYS_NAND_OOBSIZE 64
128 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
129 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
130 #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
131 10, 11, 12, 13, 14, 15, 16, 17, \
132 18, 19, 20, 21, 22, 23, 24, 25, \
133 26, 27, 28, 29, 30, 31, 32, 33, \
134 34, 35, 36, 37, 38, 39, 40, 41, \
135 42, 43, 44, 45, 46, 47, 48, 49, \
136 50, 51, 52, 53, 54, 55, 56, 57, }
137 #define CONFIG_SYS_NAND_ECCSIZE 512
138 #define CONFIG_SYS_NAND_ECCBYTES 14
139 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW_DETECTION_SW
140 #define CONFIG_NAND_OMAP_GPMC
143 /* UBI configuration */
144 #define CONFIG_SPL_UBI 1
145 #define CONFIG_SPL_UBI_MAX_VOL_LEBS 256
146 #define CONFIG_SPL_UBI_MAX_PEB_SIZE (256*1024)
147 #define CONFIG_SPL_UBI_MAX_PEBS 4096
148 #define CONFIG_SPL_UBI_VOL_IDS 8
149 #define CONFIG_SPL_UBI_LOAD_MONITOR_ID 0
150 #define CONFIG_SPL_UBI_LOAD_KERNEL_ID 3
151 #define CONFIG_SPL_UBI_LOAD_ARGS_ID 4
152 #define CONFIG_SPL_UBI_PEB_OFFSET 4
153 #define CONFIG_SPL_UBI_VID_OFFSET 512
154 #define CONFIG_SPL_UBI_LEB_START 2048
155 #define CONFIG_SPL_UBI_INFO_ADDR 0x88080000
157 /* environment organization */
158 #define CONFIG_ENV_IS_IN_UBI 1
159 #define CONFIG_ENV_UBI_PART "UBI"
160 #define CONFIG_ENV_UBI_VOLUME "config"
161 #define CONFIG_ENV_UBI_VOLUME_REDUND "config_r"
162 #define CONFIG_UBI_SILENCE_MSG 1
163 #define CONFIG_UBIFS_SILENCE_MSG 1
164 #define CONFIG_ENV_SIZE (32*1024)
166 #endif /* __IGEP00X0_H */