3 * Texas Instruments Incorporated.
4 * Sricharan R <r.sricharan@ti.com>
6 * Configuration settings for the TI EVM5430 board.
7 * See ti_omap5_common.h for omap5 common settings.
9 * SPDX-License-Identifier: GPL-2.0+
12 #ifndef __CONFIG_OMAP5_EVM_H
13 #define __CONFIG_OMAP5_EVM_H
15 #include <environment/ti/dfu.h>
17 #ifndef CONFIG_SPL_BUILD
18 /* Define the default GPT table for eMMC */
19 #define PARTS_DEFAULT \
20 "uuid_disk=${uuid_gpt_disk};" \
21 "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}"
25 "dfu_bufsiz=0x10000\0" \
30 #include <configs/ti_omap5_common.h>
32 #define CONFIG_SYS_NS16550_COM3 UART3_BASE
34 #define CONFIG_MISC_INIT_R
35 /* MMC ENV related defines */
36 #define CONFIG_SYS_MMC_ENV_DEV 1 /* SLOT2: eMMC(1) */
37 #define CONFIG_ENV_SIZE (128 << 10)
38 #define CONFIG_ENV_OFFSET 0x260000
39 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
40 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
42 /* Enhance our eMMC support / experience. */
43 #define CONFIG_HSMMC2_8BIT
44 #define CONFIG_SUPPORT_EMMC_BOOT
46 /* Required support for the TCA642X GPIO we have on the uEVM */
47 #define CONFIG_TCA642X
48 #define CONFIG_SYS_I2C_TCA642X_BUS_NUM 4
49 #define CONFIG_SYS_I2C_TCA642X_ADDR 0x22
51 /* USB UHH support options */
52 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
54 #define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 80
55 #define CONFIG_OMAP_EHCI_PHY3_RESET_GPIO 79
57 /* Enabled commands */
59 /* USB Networking options */
61 #define CONSOLEDEV "ttyO2"
63 #define CONFIG_SCSI_AHCI_PLAT
64 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 1
65 #define CONFIG_SYS_SCSI_MAX_LUN 1
66 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
67 CONFIG_SYS_SCSI_MAX_LUN)
69 #endif /* __CONFIG_OMAP5_EVM_H */