2 * Configuration settings for the SAMA5D4 Xplained ultra board.
4 * Copyright (C) 2014 Atmel
5 * Bo Shen <voice.shen@atmel.com>
7 * SPDX-License-Identifier: GPL-2.0+
13 /* No NOR flash, this definition should put before common header */
14 #define CONFIG_SYS_NO_FLASH
16 #include "at91-sama5_common.h"
19 #define CONFIG_ATMEL_USART
20 #define CONFIG_USART_BASE ATMEL_BASE_USART3
21 #define CONFIG_USART_ID ATMEL_ID_USART3
24 #define CONFIG_NR_DRAM_BANKS 1
25 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
26 #define CONFIG_SYS_SDRAM_SIZE 0x20000000
28 #ifdef CONFIG_SPL_BUILD
29 #define CONFIG_SYS_INIT_SP_ADDR 0x210000
31 #define CONFIG_SYS_INIT_SP_ADDR \
32 (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
35 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
40 #define CONFIG_ATMEL_SPI
41 #define CONFIG_ATMEL_SPI0
42 #define CONFIG_SF_DEFAULT_BUS 0
43 #define CONFIG_SF_DEFAULT_CS 0
44 #define CONFIG_SF_DEFAULT_SPEED 30000000
48 #define CONFIG_CMD_NAND
50 #ifdef CONFIG_CMD_NAND
51 #define CONFIG_NAND_ATMEL
52 #define CONFIG_SYS_MAX_NAND_DEVICE 1
53 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
55 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
57 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
58 #define CONFIG_SYS_NAND_ONFI_DETECTION
59 /* PMECC & PMERRLOC */
60 #define CONFIG_ATMEL_NAND_HWECC
61 #define CONFIG_ATMEL_NAND_HW_PMECC
65 #define CONFIG_CMD_MMC
69 #define CONFIG_GENERIC_MMC
70 #define CONFIG_GENERIC_ATMEL_MCI
71 #define ATMEL_BASE_MMCI ATMEL_BASE_MCI1
77 #define CONFIG_USB_EHCI
78 #define CONFIG_USB_EHCI_ATMEL
79 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
80 #define CONFIG_USB_STORAGE
84 #define CONFIG_USB_ETHER
85 #define CONFIG_USB_ETH_RNDIS
86 #define CONFIG_USBNET_MANUFACTURER "Atmel SAMA5D4EK"
88 #if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
89 #define CONFIG_CMD_FAT
90 #define CONFIG_DOS_PARTITION
93 /* Ethernet Hardware */
96 #define CONFIG_NET_RETRY_COUNT 20
97 #define CONFIG_MACB_SEARCH_PHY
100 /* #define CONFIG_LCD */
102 #define LCD_BPP LCD_COLOR16
103 #define LCD_OUTPUT_BPP 24
104 #define CONFIG_LCD_LOGO
105 #define CONFIG_LCD_INFO
106 #define CONFIG_LCD_INFO_BELOW_LOGO
107 #define CONFIG_SYS_WHITE_ON_BLACK
108 #define CONFIG_ATMEL_HLCD
109 #define CONFIG_ATMEL_LCD_RGB565
110 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
113 #ifdef CONFIG_SYS_USE_SERIALFLASH
114 /* override the bootcmd, bootargs and other configuration for spi flash env */
115 #elif CONFIG_SYS_USE_NANDFLASH
116 /* override the bootcmd, bootargs and other configuration for nandflash env */
117 #elif CONFIG_SYS_USE_MMC
118 /* override the bootcmd, bootargs and other configuration for sd/mmc env */
122 #define CONFIG_SPL_FRAMEWORK
123 #define CONFIG_SPL_TEXT_BASE 0x200000
124 #define CONFIG_SPL_MAX_SIZE 0x10000
125 #define CONFIG_SPL_BSS_START_ADDR 0x20000000
126 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000
127 #define CONFIG_SYS_SPL_MALLOC_START 0x20080000
128 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000
130 #define CONFIG_SPL_LIBCOMMON_SUPPORT
131 #define CONFIG_SPL_LIBGENERIC_SUPPORT
132 #define CONFIG_SPL_GPIO_SUPPORT
133 #define CONFIG_SPL_SERIAL_SUPPORT
135 #define CONFIG_SPL_BOARD_INIT
136 #define CONFIG_SYS_MONITOR_LEN (512 << 10)
138 #ifdef CONFIG_SYS_USE_MMC
139 #define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds
140 #define CONFIG_SPL_MMC_SUPPORT
141 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400
142 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
143 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
144 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
145 #define CONFIG_SPL_FAT_SUPPORT
146 #define CONFIG_SPL_LIBDISK_SUPPORT
148 #elif CONFIG_SYS_USE_NANDFLASH
149 #define CONFIG_SPL_NAND_SUPPORT
150 #define CONFIG_SPL_NAND_DRIVERS
151 #define CONFIG_SPL_NAND_BASE
152 #define CONFIG_PMECC_CAP 8
153 #define CONFIG_PMECC_SECTOR_SIZE 512
154 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
155 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
156 #define CONFIG_SYS_NAND_PAGE_SIZE 0x1000
157 #define CONFIG_SYS_NAND_PAGE_COUNT 64
158 #define CONFIG_SYS_NAND_OOBSIZE 224
159 #define CONFIG_SYS_NAND_BLOCK_SIZE 0x40000
160 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0
161 #define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
163 #elif CONFIG_SYS_USE_SERIALFLASH
164 #define CONFIG_SPL_SPI_SUPPORT
165 #define CONFIG_SPL_SPI_FLASH_SUPPORT
166 #define CONFIG_SPL_SPI_LOAD
167 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000