2 * (C) Copyright 2009-2014
3 * Gerald Kerma <dreagle@doukki.net>
4 * Marvell Semiconductor <www.marvell.com>
5 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
7 * SPDX-License-Identifier: GPL-2.0+
10 #ifndef _CONFIG_SHEEVAPLUG_H
11 #define _CONFIG_SHEEVAPLUG_H
13 #define CONFIG_SYS_GENERIC_BOARD
16 * Version number information
18 #define CONFIG_IDENT_STRING "\nMarvell-Sheevaplug"
21 * High Level Configuration Options (easy to change)
23 #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
24 #define CONFIG_KW88F6281 1 /* SOC Name */
25 #define CONFIG_MACH_SHEEVAPLUG /* Machine type */
26 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
29 * Compression configuration
36 * Miscellaneous configurable options
38 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
41 * Commands configuration
43 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
44 #include <config_cmd_default.h>
45 #define CONFIG_CMD_BOOTZ
46 #define CONFIG_CMD_DHCP
47 #define CONFIG_CMD_ENV
48 #define CONFIG_CMD_IDE
49 #define CONFIG_CMD_MII
50 #define CONFIG_CMD_MMC
51 #define CONFIG_CMD_NAND
52 #define CONFIG_CMD_PING
53 #define CONFIG_CMD_USB
56 * mv-common.h should be defined after CMD configs since it used them
57 * to enable certain macros
59 #include "mv-common.h"
62 * Environment variables configurations
64 #ifdef CONFIG_CMD_NAND
65 #define CONFIG_ENV_IS_IN_NAND 1
66 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
68 #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
71 * max 4k env size is enough, but in case of nand
72 * it has to be rounded to sector size
74 #define CONFIG_ENV_SIZE 0x20000 /* 128k */
75 #define CONFIG_ENV_ADDR 0x80000
76 #define CONFIG_ENV_OFFSET 0x80000 /* env starts here */
79 * Default environment variables
81 #define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \
82 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
83 "${x_bootcmd_usb}; bootm 0x6400000;"
85 #define CONFIG_MTDPARTS \
86 "mtdparts=orion_nand:512K(uboot)," \
87 "512K(env),1M(script),6M(kernel)," \
88 "12M(ramdisk),4M(spare),-(rootfs)"
90 #define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \
91 "=ttyS0,115200 mtdparts="CONFIG_MTDPARTS \
92 "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \
93 "x_bootcmd_usb=usb start\0" \
94 "x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0"
96 #define MTDIDS_DEFAULT "nand0=orion_nand"
98 #define MTDPARTS_DEFAULT \
99 "mtdparts="CONFIG_MTDPARTS
102 * Ethernet Driver configuration
104 #ifdef CONFIG_CMD_NET
105 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
106 #define CONFIG_PHY_BASE_ADR 0
107 #endif /* CONFIG_CMD_NET */
110 * SDIO/MMC Card Configuration
112 #ifdef CONFIG_CMD_MMC
114 #define CONFIG_GENERIC_MMC
115 #define CONFIG_MVEBU_MMC
116 #define CONFIG_SYS_MMC_BASE KW_SDIO_BASE
117 #endif /* CONFIG_CMD_MMC */
120 * SATA driver configuration
122 #ifdef CONFIG_CMD_IDE
124 #define CONFIG_IDE_PREINIT
125 #define CONFIG_DOS_PARTITION
126 #define CONFIG_MVSATA_IDE_USE_PORT0
127 #define CONFIG_MVSATA_IDE_USE_PORT1
128 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
129 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
130 #endif /* CONFIG_CMD_IDE */
135 #define CONFIG_CMD_EXT2
136 #define CONFIG_CMD_EXT4
137 #define CONFIG_CMD_FAT
138 #define CONFIG_CMD_JFFS2
139 #define CONFIG_CMD_UBI
140 #define CONFIG_CMD_UBIFS
141 #define CONFIG_RBTREE
142 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
143 #define CONFIG_MTD_PARTITIONS
144 #define CONFIG_CMD_MTDPARTS
146 #endif /* _CONFIG_SHEEVAPLUG_H */