2 * (C) Copyright 2009-2014
3 * Gerald Kerma <dreagle@doukki.net>
4 * Marvell Semiconductor <www.marvell.com>
5 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
7 * SPDX-License-Identifier: GPL-2.0+
10 #ifndef _CONFIG_SHEEVAPLUG_H
11 #define _CONFIG_SHEEVAPLUG_H
14 * Version number information
16 #define CONFIG_IDENT_STRING "\nMarvell-Sheevaplug"
19 * High Level Configuration Options (easy to change)
21 #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
22 #define CONFIG_KW88F6281 1 /* SOC Name */
23 #define CONFIG_MACH_SHEEVAPLUG /* Machine type */
24 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
27 * Compression configuration
34 * Commands configuration
36 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
37 #include <config_cmd_default.h>
38 #define CONFIG_CMD_BOOTZ
39 #define CONFIG_CMD_DHCP
40 #define CONFIG_CMD_ENV
41 #define CONFIG_CMD_IDE
42 #define CONFIG_CMD_MII
43 #define CONFIG_CMD_MMC
44 #define CONFIG_CMD_NAND
45 #define CONFIG_CMD_PING
46 #define CONFIG_CMD_USB
48 * mv-common.h should be defined after CMD configs since it used them
49 * to enable certain macros
51 #include "mv-common.h"
54 * Environment variables configurations
56 #ifdef CONFIG_CMD_NAND
57 #define CONFIG_ENV_IS_IN_NAND 1
58 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
60 #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
63 * max 4k env size is enough, but in case of nand
64 * it has to be rounded to sector size
66 #define CONFIG_ENV_SIZE 0x20000 /* 128k */
67 #define CONFIG_ENV_ADDR 0x80000
68 #define CONFIG_ENV_OFFSET 0x80000 /* env starts here */
71 * Default environment variables
73 #define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \
74 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
75 "${x_bootcmd_usb}; bootm 0x6400000;"
77 #define CONFIG_MTDPARTS "orion_nand:512k(uboot)," \
78 "3m@1m(kernel),1m@4m(psm),13m@5m(rootfs) rw\0"
80 #define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \
81 "=ttyS0,115200 mtdparts="CONFIG_MTDPARTS \
82 "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \
83 "x_bootcmd_usb=usb start\0" \
84 "x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2\0"
87 * Ethernet Driver configuration
90 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
91 #define CONFIG_PHY_BASE_ADR 0
92 #endif /* CONFIG_CMD_NET */
95 * SDIO/MMC Card Configuration
99 #define CONFIG_GENERIC_MMC
100 #define CONFIG_MVEBU_MMC
101 #define CONFIG_SYS_MMC_BASE KW_SDIO_BASE
102 #endif /* CONFIG_CMD_MMC */
105 * SATA driver configuration
107 #ifdef CONFIG_CMD_IDE
109 #define CONFIG_IDE_PREINIT
110 #define CONFIG_DOS_PARTITION
111 #define CONFIG_MVSATA_IDE_USE_PORT0
112 #define CONFIG_MVSATA_IDE_USE_PORT1
113 #define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
114 #define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
115 #endif /* CONFIG_CMD_IDE */
120 #define CONFIG_CMD_EXT2
121 #define CONFIG_CMD_EXT4
122 #define CONFIG_CMD_FAT
123 #define CONFIG_CMD_JFFS2
124 #define CONFIG_CMD_UBI
125 #define CONFIG_CMD_UBIFS
126 #define CONFIG_RBTREE
127 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
128 #define CONFIG_MTD_PARTITIONS
129 #define CONFIG_CMD_MTDPARTS
132 #endif /* _CONFIG_SHEEVAPLUG_H */