git.sur5r.net Git - u-boot/blob - include/configs/trats.h

   1 /*
   2  * Copyright (C) 2011 Samsung Electronics
   3  * Heungjun Kim <riverful.kim@samsung.com>
   4  *
   5  * Configuation settings for the SAMSUNG TRATS (EXYNOS4210) board.
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __CONFIG_TRATS_H
  11 #define __CONFIG_TRATS_H
  12
  13 #include <configs/exynos4-dt.h>
  14
  15 #define CONFIG_SYS_PROMPT       "Trats # "      /* Monitor Command Prompt */
  16
  17 #define CONFIG_TRATS
  18
  19 #undef CONFIG_DEFAULT_DEVICE_TREE
  20 #define CONFIG_DEFAULT_DEVICE_TREE      exynos4210-trats
  21
  22 #define CONFIG_TIZEN                    /* TIZEN lib */
  23
  24 #define CONFIG_SYS_L2CACHE_OFF
  25 #ifndef CONFIG_SYS_L2CACHE_OFF
  26 #define CONFIG_SYS_L2_PL310
  27 #define CONFIG_SYS_PL310_BASE   0x10502000
  28 #endif
  29
  30 /* TRATS has 4 banks of DRAM */
  31 #define CONFIG_NR_DRAM_BANKS            4
  32 #define CONFIG_SYS_SDRAM_BASE           0x40000000
  33 #define PHYS_SDRAM_1                    CONFIG_SYS_SDRAM_BASE
  34 #define CONFIG_SYS_TEXT_BASE            0x63300000
  35 #define SDRAM_BANK_SIZE                 (256 << 20)     /* 256 MB */
  36
  37 /* memtest works on */
  38 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
  39 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_SDRAM_BASE + 0x5000000)
  40 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 0x4800000)
  41
  42 #define CONFIG_SYS_TEXT_BASE            0x63300000
  43
  44 #include <linux/sizes.h>
  45 /* Size of malloc() pool */
  46 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (80 * SZ_1M))
  47
  48 /* select serial console configuration */
  49 #define CONFIG_SERIAL2
  50 #define CONFIG_BAUDRATE                 115200
  51
  52 /* Console configuration */
  53 #define CONFIG_SYS_CONSOLE_INFO_QUIET
  54 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  55
  56 /* MACH_TYPE_TRATS macro will be removed once added to mach-types */
  57 #define MACH_TYPE_TRATS                 3928
  58 #define CONFIG_MACH_TYPE                MACH_TYPE_TRATS
  59
  60 #define CONFIG_BOOTARGS                 "Please use defined boot"
  61 #define CONFIG_BOOTCOMMAND              "run mmcboot"
  62 #define CONFIG_DEFAULT_CONSOLE          "console=ttySAC1,115200n8\0"
  63
  64 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
  65                                         - GENERATED_GBL_DATA_SIZE)
  66
  67 #define CONFIG_SYS_MEM_TOP_HIDE (1 << 20)       /* ram console */
  68
  69 #define CONFIG_SYS_MONITOR_BASE 0x00000000
  70
  71 #define CONFIG_BOOTBLOCK                "10"
  72 #define CONFIG_ENV_COMMON_BOOT          "${console} ${meminfo}"
  73
  74 #define CONFIG_ENV_IS_IN_MMC
  75 #define CONFIG_SYS_MMC_ENV_DEV          CONFIG_MMC_DEFAULT_DEV
  76 #define CONFIG_ENV_SIZE                 4096
  77 #define CONFIG_ENV_OFFSET               ((32 - 4) << 10) /* 32KiB - 4KiB */
  78
  79 #define CONFIG_ENV_OVERWRITE
  80
  81 #define CONFIG_ENV_VARS_UBOOT_CONFIG
  82 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
  83
  84 /* Tizen - partitions definitions */
  85 #define PARTS_CSA               "csa-mmc"
  86 #define PARTS_BOOTLOADER        "u-boot"
  87 #define PARTS_BOOT              "boot"
  88 #define PARTS_ROOT              "platform"
  89 #define PARTS_DATA              "data"
  90 #define PARTS_CSC               "csc"
  91 #define PARTS_UMS               "ums"
  92
  93 #define PARTS_DEFAULT \
  94         "uuid_disk=${uuid_gpt_disk};" \
  95         "name="PARTS_CSA",size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \
  96         "name="PARTS_BOOTLOADER",size=60MiB," \
  97                 "uuid=${uuid_gpt_"PARTS_BOOTLOADER"};" \
  98         "name="PARTS_BOOT",size=100MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \
  99         "name="PARTS_ROOT",size=1GiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \
 100         "name="PARTS_DATA",size=3GiB,uuid=${uuid_gpt_"PARTS_DATA"};" \
 101         "name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \
 102         "name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \
 103
 104 #define CONFIG_DFU_ALT \
 105         "u-boot mmc 80 400;" \
 106         "uImage ext4 0 2;" \
 107         "exynos4210-trats.dtb ext4 0 2;" \
 108         ""PARTS_BOOT" part 0 2;" \
 109         ""PARTS_ROOT" part 0 5;" \
 110         ""PARTS_DATA" part 0 6;" \
 111         ""PARTS_UMS" part 0 7;" \
 112         "params.bin mmc 0x38 0x8\0"
 113
 114 #define CONFIG_EXTRA_ENV_SETTINGS \
 115         "bootk=" \
 116                 "run loaduimage;" \
 117                 "if run loaddtb; then " \
 118                         "bootm 0x40007FC0 - ${fdtaddr};" \
 119                 "fi;" \
 120                 "bootm 0x40007FC0;\0" \
 121         "updatemmc=" \
 122                 "mmc boot 0 1 1 1; mmc write 0 0x42008000 0 0x200;" \
 123                 "mmc boot 0 1 1 0\0" \
 124         "updatebackup=" \
 125                 "mmc boot 0 1 1 2; mmc write 0 0x42100000 0 0x200;" \
 126                 "mmc boot 0 1 1 0\0" \
 127         "updatebootb=" \
 128                 "mmc read 0 0x42100000 0x80 0x200; run updatebackup\0" \
 129         "lpj=lpj=3981312\0" \
 130         "nfsboot=" \
 131                 "setenv bootargs root=/dev/nfs rw " \
 132                 "nfsroot=${nfsroot},nolock,tcp " \
 133                 "ip=${ipaddr}:${serverip}:${gatewayip}:" \
 134                 "${netmask}:generic:usb0:off " CONFIG_ENV_COMMON_BOOT \
 135                 "; run bootk\0" \
 136         "ramfsboot=" \
 137                 "setenv bootargs root=/dev/ram0 rw rootfstype=ext2 " \
 138                 "${console} ${meminfo} " \
 139                 "initrd=0x43000000,8M ramdisk=8192\0" \
 140         "mmcboot=" \
 141                 "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
 142                 "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
 143                 "run bootk\0" \
 144         "bootchart=setenv opts init=/sbin/bootchartd; run bootcmd\0" \
 145         "boottrace=setenv opts initcall_debug; run bootcmd\0" \
 146         "mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
 147         "verify=n\0" \
 148         "rootfstype=ext4\0" \
 149         "console=" CONFIG_DEFAULT_CONSOLE \
 150         "meminfo=crashkernel=32M@0x50000000\0" \
 151         "nfsroot=/nfsroot/arm\0" \
 152         "bootblock=" CONFIG_BOOTBLOCK "\0" \
 153         "loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \
 154         "loaddtb=ext4load mmc ${mmcdev}:${mmcbootpart} ${fdtaddr} " \
 155                 "${fdtfile}\0" \
 156         "mmcdev=0\0" \
 157         "mmcbootpart=2\0" \
 158         "mmcrootpart=5\0" \
 159         "opts=always_resume=1\0" \
 160         "partitions=" PARTS_DEFAULT \
 161         "dfu_alt_info=" CONFIG_DFU_ALT \
 162         "spladdr=0x40000100\0" \
 163         "splsize=0x200\0" \
 164         "splfile=falcon.bin\0" \
 165         "spl_export=" \
 166                    "setexpr spl_imgsize ${splsize} + 8 ;" \
 167                    "setenv spl_imgsize 0x${spl_imgsize};" \
 168                    "setexpr spl_imgaddr ${spladdr} - 8 ;" \
 169                    "setexpr spl_addr_tmp ${spladdr} - 4 ;" \
 170                    "mw.b ${spl_imgaddr} 0x00 ${spl_imgsize};run loaduimage;" \
 171                    "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
 172                    "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo};" \
 173                    "spl export atags 0x40007FC0;" \
 174                    "crc32 ${spladdr} ${splsize} ${spl_imgaddr};" \
 175                    "mw.l ${spl_addr_tmp} ${splsize};" \
 176                    "ext4write mmc ${mmcdev}:${mmcbootpart}" \
 177                    " /${splfile} ${spl_imgaddr} ${spl_imgsize};" \
 178                    "setenv spl_imgsize;" \
 179                    "setenv spl_imgaddr;" \
 180                    "setenv spl_addr_tmp;\0" \
 181         "fdtaddr=40800000\0" \
 182
 183 /* Falcon mode definitions */
 184 #define CONFIG_CMD_SPL
 185 #define CONFIG_SYS_SPL_ARGS_ADDR        CONFIG_SYS_SDRAM_BASE + 0x100
 186
 187 /* I2C */
 188 #include <asm/arch/gpio.h>
 189
 190 #define CONFIG_CMD_I2C
 191
 192 #define CONFIG_SYS_I2C
 193 #define CONFIG_SYS_I2C_S3C24X0
 194 #define CONFIG_SYS_I2C_S3C24X0_SPEED    100000
 195 #define CONFIG_SYS_I2C_S3C24X0_SLAVE    0xFE
 196 #define CONFIG_MAX_I2C_NUM              8
 197 #define CONFIG_SYS_I2C_SOFT             /* I2C bit-banged */
 198 #define CONFIG_SYS_I2C_SOFT_SPEED       50000
 199 #define CONFIG_SYS_I2C_SOFT_SLAVE       0x7F
 200 #define CONFIG_SOFT_I2C_READ_REPEATED_START
 201 #define CONFIG_SYS_I2C_INIT_BOARD
 202
 203 /* I2C FG */
 204 #define CONFIG_SOFT_I2C_GPIO_SCL exynos4_gpio_get(2, y4, 1)
 205 #define CONFIG_SOFT_I2C_GPIO_SDA exynos4_gpio_get(2, y4, 0)
 206
 207 /* POWER */
 208 #define CONFIG_POWER
 209 #define CONFIG_POWER_I2C
 210 #define CONFIG_POWER_MAX8997
 211
 212 #define CONFIG_POWER_FG
 213 #define CONFIG_POWER_FG_MAX17042
 214 #define CONFIG_POWER_MUIC
 215 #define CONFIG_POWER_MUIC_MAX8997
 216 #define CONFIG_POWER_BATTERY
 217 #define CONFIG_POWER_BATTERY_TRATS
 218
 219 /* Common misc for Samsung */
 220 #define CONFIG_MISC_COMMON
 221
 222 #define CONFIG_MISC_INIT_R
 223
 224 /* Download menu - Samsung common */
 225 #define CONFIG_LCD_MENU
 226 #define CONFIG_LCD_MENU_BOARD
 227
 228 /* Download menu - definitions for check keys */
 229 #ifndef __ASSEMBLY__
 230 #include <power/max8997_pmic.h>
 231
 232 #define KEY_PWR_PMIC_NAME               "MAX8997_PMIC"
 233 #define KEY_PWR_STATUS_REG              MAX8997_REG_STATUS1
 234 #define KEY_PWR_STATUS_MASK             (1 << 0)
 235 #define KEY_PWR_INTERRUPT_REG           MAX8997_REG_INT1
 236 #define KEY_PWR_INTERRUPT_MASK          (1 << 0)
 237
 238 #define KEY_VOL_UP_GPIO                 exynos4_gpio_get(2, x2, 0)
 239 #define KEY_VOL_DOWN_GPIO               exynos4_gpio_get(2, x2, 1)
 240 #endif /* __ASSEMBLY__ */
 241
 242 /* LCD console */
 243 #define LCD_BPP                 LCD_COLOR16
 244 #define CONFIG_SYS_WHITE_ON_BLACK
 245
 246 /* LCD */
 247 #define CONFIG_EXYNOS_FB
 248 #define CONFIG_LCD
 249 #define CONFIG_CMD_BMP
 250 #define CONFIG_BMP_16BPP
 251 #define CONFIG_FB_ADDR          0x52504000
 252 #define CONFIG_S6E8AX0
 253 #define CONFIG_EXYNOS_MIPI_DSIM
 254 #define CONFIG_VIDEO_BMP_GZIP
 255 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE  ((500 * 160 * 4) + 54)
 256
 257 #define LCD_XRES        720
 258 #define LCD_YRES        1280
 259
 260 #endif  /* __CONFIG_H */