2 * Copyright 2013 Freescale Semiconductor, Inc.
4 * Configuration settings for the Freescale Vybrid vf610twr board.
6 * SPDX-License-Identifier: GPL-2.0+
12 #include <asm/arch/imx-regs.h>
13 #include <config_cmd_default.h>
17 #define CONFIG_SYS_GENERIC_BOARD
18 #define CONFIG_DISPLAY_CPUINFO
19 #define CONFIG_DISPLAY_BOARDINFO
21 #define CONFIG_MACH_TYPE 4146
23 #define CONFIG_SKIP_LOWLEVEL_INIT
25 /* Enable passing of ATAGs */
26 #define CONFIG_CMDLINE_TAG
28 #define CONFIG_CMD_FUSE
29 #ifdef CONFIG_CMD_FUSE
30 #define CONFIG_MXC_OCOTP
33 /* Size of malloc() pool */
34 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
36 #define CONFIG_BOARD_EARLY_INIT_F
38 #define CONFIG_FSL_LPUART
39 #define LPUART_BASE UART1_BASE
41 /* Allow to overwrite serial and ethaddr */
42 #define CONFIG_ENV_OVERWRITE
43 #define CONFIG_SYS_UART_PORT (1)
44 #define CONFIG_BAUDRATE 115200
46 #undef CONFIG_CMD_IMLS
49 #define CONFIG_CMD_NAND
50 #define CONFIG_CMD_NAND_TRIMFFS
51 #define CONFIG_SYS_NAND_ONFI_DETECTION
53 #ifdef CONFIG_CMD_NAND
54 #define CONFIG_USE_ARCH_MEMCPY
55 #define CONFIG_SYS_MAX_NAND_DEVICE 1
56 #define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR
59 #define CONFIG_CMD_UBI
60 #define CONFIG_CMD_UBIFS
64 /* Dynamic MTD partition support */
65 #define CONFIG_CMD_MTDPARTS
66 #define CONFIG_MTD_PARTITIONS
67 #define CONFIG_MTD_DEVICE
68 #define MTDIDS_DEFAULT "nand0=fsl_nfc"
69 #define MTDPARTS_DEFAULT "mtdparts=fsl_nfc:" \
79 #define CONFIG_FSL_ESDHC
80 #define CONFIG_SYS_FSL_ESDHC_ADDR 0
81 #define CONFIG_SYS_FSL_ESDHC_NUM 1
83 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
85 #define CONFIG_CMD_MMC
86 #define CONFIG_GENERIC_MMC
87 #define CONFIG_CMD_FAT
88 #define CONFIG_DOS_PARTITION
90 #define CONFIG_CMD_PING
91 #define CONFIG_CMD_DHCP
92 #define CONFIG_CMD_MII
93 #define CONFIG_FEC_MXC
95 #define IMX_FEC_BASE ENET_BASE_ADDR
96 #define CONFIG_FEC_XCV_TYPE RMII
97 #define CONFIG_FEC_MXC_PHYADDR 0
99 #define CONFIG_PHY_MICREL
102 #define CONFIG_FSL_QSPI
104 #ifdef CONFIG_FSL_QSPI
105 #define CONFIG_CMD_SF
106 #define CONFIG_SPI_FLASH_SPANSION
107 #define FSL_QSPI_FLASH_SIZE (1 << 24)
108 #define FSL_QSPI_FLASH_NUM 2
109 #define CONFIG_SYS_FSL_QSPI_LE
113 #define CONFIG_CMD_I2C
114 #define CONFIG_SYS_I2C
115 #define CONFIG_SYS_I2C_MXC
116 #define CONFIG_SYS_SPD_BUS_NUM 0
118 #define CONFIG_BOOTDELAY 3
120 #define CONFIG_LOADADDR 0x82000000
122 /* We boot from the gfxRAM area of the OCRAM. */
123 #define CONFIG_SYS_TEXT_BASE 0x3f408000
124 #define CONFIG_BOARD_SIZE_LIMIT 524288
126 #define CONFIG_EXTRA_ENV_SETTINGS \
127 "script=boot.scr\0" \
130 "fdt_high=0xffffffff\0" \
131 "initrd_high=0xffffffff\0" \
132 "fdt_file=vf610-twr.dtb\0" \
133 "fdt_addr=0x81000000\0" \
136 "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
138 "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
139 "update_sd_firmware_filename=u-boot.imx\0" \
140 "update_sd_firmware=" \
141 "if test ${ip_dyn} = yes; then " \
142 "setenv get_cmd dhcp; " \
144 "setenv get_cmd tftp; " \
146 "if mmc dev ${mmcdev}; then " \
147 "if ${get_cmd} ${update_sd_firmware_filename}; then " \
148 "setexpr fw_sz ${filesize} / 0x200; " \
149 "setexpr fw_sz ${fw_sz} + 1; " \
150 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
153 "mmcargs=setenv bootargs console=${console},${baudrate} " \
154 "root=${mmcroot}\0" \
156 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
157 "bootscript=echo Running bootscript from mmc ...; " \
159 "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
160 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
161 "mmcboot=echo Booting from mmc ...; " \
163 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
164 "if run loadfdt; then " \
165 "bootz ${loadaddr} - ${fdt_addr}; " \
167 "if test ${boot_fdt} = try; then " \
170 "echo WARN: Cannot load the DT; " \
176 "netargs=setenv bootargs console=${console},${baudrate} " \
178 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
179 "netboot=echo Booting from net ...; " \
181 "if test ${ip_dyn} = yes; then " \
182 "setenv get_cmd dhcp; " \
184 "setenv get_cmd tftp; " \
186 "${get_cmd} ${image}; " \
187 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
188 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
189 "bootz ${loadaddr} - ${fdt_addr}; " \
191 "if test ${boot_fdt} = try; then " \
194 "echo WARN: Cannot load the DT; " \
201 #define CONFIG_BOOTCOMMAND \
202 "mmc dev ${mmcdev}; if mmc rescan; then " \
203 "if run loadbootscript; then " \
206 "if run loadimage; then " \
208 "else run netboot; " \
211 "else run netboot; fi"
213 /* Miscellaneous configurable options */
214 #define CONFIG_SYS_LONGHELP /* undef to save memory */
215 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
216 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
217 #undef CONFIG_AUTO_COMPLETE
218 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
219 #define CONFIG_SYS_PBSIZE \
220 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
221 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */
222 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
224 #define CONFIG_CMD_MEMTEST
225 #define CONFIG_SYS_MEMTEST_START 0x80010000
226 #define CONFIG_SYS_MEMTEST_END 0x87C00000
228 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
232 * The stack sizes are set up in start.S using the settings below
234 #define CONFIG_STACKSIZE (128 * 1024) /* regular stack */
236 /* Physical memory map */
237 #define CONFIG_NR_DRAM_BANKS 1
238 #define PHYS_SDRAM (0x80000000)
239 #define PHYS_SDRAM_SIZE (128 * 1024 * 1024)
241 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
242 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
243 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
245 #define CONFIG_SYS_INIT_SP_OFFSET \
246 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
247 #define CONFIG_SYS_INIT_SP_ADDR \
248 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
250 /* FLASH and environment organization */
251 #define CONFIG_SYS_NO_FLASH
253 #ifdef CONFIG_ENV_IS_IN_MMC
254 #define CONFIG_ENV_SIZE (8 * 1024)
256 #define CONFIG_ENV_OFFSET (12 * 64 * 1024)
257 #define CONFIG_SYS_MMC_ENV_DEV 0
260 #ifdef CONFIG_ENV_IS_IN_NAND
261 #define CONFIG_ENV_SIZE (64 * 2048)
262 #define CONFIG_ENV_SECT_SIZE (64 * 2048)
263 #define CONFIG_ENV_RANGE (512 * 1024)
264 #define CONFIG_ENV_OFFSET 0x180000
267 #define CONFIG_OF_LIBFDT
268 #define CONFIG_CMD_BOOTZ