2 * esd vme8349 U-Boot configuration file
3 * Copyright (c) 2008, 2009 esd gmbh Hannover Germany
5 * (C) Copyright 2006-2010
6 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
8 * reinhard.arlt@esd-electronics.de
9 * Based on the MPC8349EMDS config.
11 * See file CREDITS for list of people who contributed to this
14 * This program is free software; you can redistribute it and/or
15 * modify it under the terms of the GNU General Public License as
16 * published by the Free Software Foundation; either version 2 of
17 * the License, or (at your option) any later version.
19 * This program is distributed in the hope that it will be useful,
20 * but WITHOUT ANY WARRANTY; without even the implied warranty of
21 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
22 * GNU General Public License for more details.
24 * You should have received a copy of the GNU General Public License
25 * along with this program; if not, write to the Free Software
26 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
31 * vme8349 board configuration file.
38 * Top level Makefile configuration choices
45 * High Level Configuration Options
47 #define CONFIG_E300 1 /* E300 Family */
48 #define CONFIG_MPC83xx 1 /* MPC83xx family */
49 #define CONFIG_MPC834x 1 /* MPC834x family */
50 #define CONFIG_MPC8349 1 /* MPC8349 specific */
51 #define CONFIG_VME8349 1 /* ESD VME8349 board specific */
53 #define CONFIG_SYS_TEXT_BASE 0xFFF00000
55 #define CONFIG_MISC_INIT_R
58 /* Don't enable PCI2 on vme834x - it doesn't exist physically. */
59 #undef CONFIG_MPC83XX_PCI2 /* support for 2nd PCI controller */
61 #define CONFIG_PCI_66M
63 #define CONFIG_83XX_CLKIN 66000000 /* in Hz */
65 #define CONFIG_83XX_CLKIN 33000000 /* in Hz */
68 #ifndef CONFIG_SYS_CLK_FREQ
70 #define CONFIG_SYS_CLK_FREQ 66000000
71 #define HRCWL_CSB_TO_CLKIN HRCWL_CSB_TO_CLKIN_4X1
73 #define CONFIG_SYS_CLK_FREQ 33000000
74 #define HRCWL_CSB_TO_CLKIN HRCWL_CSB_TO_CLKIN_8X1
78 #define CONFIG_SYS_IMMR 0xE0000000
80 #undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */
81 #define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest region */
82 #define CONFIG_SYS_MEMTEST_END 0x00100000
87 #define CONFIG_DDR_ECC /* only for ECC DDR module */
88 #define CONFIG_DDR_ECC_CMD /* use DDR ECC user commands */
89 #define CONFIG_SPD_EEPROM
90 #define SPD_EEPROM_ADDRESS 0x54
91 #define CONFIG_SYS_READ_SPD vme8349_read_spd
92 #define CONFIG_SYS_83XX_DDR_USES_CS0 /* esd; Fsl board uses CS2/CS3 */
95 * 32-bit data path mode.
97 * Please note that using this mode for devices with the real density of 64-bit
98 * effectively reduces the amount of available memory due to the effect of
99 * wrapping around while translating address to row/columns, for example in the
100 * 256MB module the upper 128MB get aliased with contents of the lower
101 * 128MB); normally this define should be used for devices with real 32-bit
104 #undef CONFIG_DDR_32BIT
106 #define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is sys memory*/
107 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE
108 #define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE
109 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN \
110 | DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075)
111 #define CONFIG_DDR_2T_TIMING
112 #define CONFIG_SYS_DDRCDR (DDRCDR_DHC_EN \
118 * FLASH on the Local Bus
120 #define CONFIG_SYS_FLASH_CFI
121 #define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */
123 #define CONFIG_SYS_FLASH_BASE 0xffc00000 /* start of FLASH */
124 #define CONFIG_SYS_FLASH_SIZE 4 /* flash size in MB */
125 #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \
126 (2 << BR_PS_SHIFT) | /* 16bit */ \
129 #define CONFIG_SYS_OR0_PRELIM 0xffc06ff7 /* 4 MB flash size */
130 #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE
131 #define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000015 /* 4 MB window size */
133 #define CONFIG_SYS_FLASH_BASE 0xf8000000 /* start of FLASH */
134 #define CONFIG_SYS_FLASH_SIZE 128 /* flash size in MB */
135 #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \
136 (2 << BR_PS_SHIFT) | /* 16bit */ \
139 #define CONFIG_SYS_OR0_PRELIM 0xf8006ff7 /* 128 MB flash size */
140 #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE
141 #define CONFIG_SYS_LBLAWAR0_PRELIM 0x8000001a /* 128 MB window size */
143 /* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
145 #define CONFIG_SYS_BR1_PRELIM (0xf0000000 | 0x00001801)
146 #define CONFIG_SYS_OR1_PRELIM (0xfffc0008 | 0x00000200)
147 #define CONFIG_SYS_LBLAWBAR1_PRELIM 0xf0000000
148 #define CONFIG_SYS_LBLAWAR1_PRELIM (0x80000000 | 0x00000011)
150 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
151 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device*/
153 #undef CONFIG_SYS_FLASH_CHECKSUM
154 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase TO (ms) */
155 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write TO (ms) */
157 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
159 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
160 #define CONFIG_SYS_RAMBOOT
162 #undef CONFIG_SYS_RAMBOOT
165 #define CONFIG_SYS_INIT_RAM_LOCK 1
166 #define CONFIG_SYS_INIT_RAM_ADDR 0xF7000000 /* Initial RAM addr */
167 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* size */
169 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
170 GENERATED_GBL_DATA_SIZE)
171 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
173 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB */
174 #define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Malloc size */
177 * Local Bus LCRR and LBCR regs
178 * LCRR: no DLL bypass, Clock divider is 4
179 * External Local Bus rate is
180 * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
182 #define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4
183 #define CONFIG_SYS_LBC_LBCR 0x00000000
185 #undef CONFIG_SYS_LB_SDRAM /* if board has SDRAM on local bus */
190 #define CONFIG_CONS_INDEX 1
191 #define CONFIG_SYS_NS16550
192 #define CONFIG_SYS_NS16550_SERIAL
193 #define CONFIG_SYS_NS16550_REG_SIZE 1
194 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
196 #define CONFIG_SYS_BAUDRATE_TABLE \
197 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
199 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500)
200 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600)
202 #define CONFIG_CMDLINE_EDITING /* add command line history */
203 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */
204 /* Use the HUSH parser */
205 #define CONFIG_SYS_HUSH_PARSER
206 #ifdef CONFIG_SYS_HUSH_PARSER
207 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
210 /* pass open firmware flat tree */
211 #define CONFIG_OF_LIBFDT
212 #define CONFIG_OF_BOARD_SETUP
213 #define CONFIG_OF_STDOUT_VIA_ALIAS
216 #define CONFIG_I2C_MULTI_BUS
217 #define CONFIG_HARD_I2C /* I2C with hardware support*/
218 #undef CONFIG_SOFT_I2C /* I2C bit-banged */
219 #define CONFIG_FSL_I2C
220 #define CONFIG_I2C_CMD_TREE
221 #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
222 #define CONFIG_SYS_I2C_SLAVE 0x7F
223 #define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} } /* Don't probe these addrs */
224 #define CONFIG_SYS_I2C1_OFFSET 0x3000
225 #define CONFIG_SYS_I2C2_OFFSET 0x3100
226 #define CONFIG_SYS_I2C_OFFSET CONFIG_SYS_I2C1_OFFSET
227 /* could also use CONFIG_I2C_MULTI_BUS and CONFIG_SYS_SPD_BUS_NUM... */
229 #define CONFIG_SYS_I2C_8574_ADDR2 0x20 /* I2C1, PCF8574 */
232 #define CONFIG_SYS_TSEC1_OFFSET 0x24000
233 #define CONFIG_SYS_TSEC1 (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
234 #define CONFIG_SYS_TSEC2_OFFSET 0x25000
235 #define CONFIG_SYS_TSEC2 (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC2_OFFSET)
239 * Addresses are mapped 1-1.
241 #define CONFIG_SYS_PCI1_MEM_BASE 0x80000000
242 #define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE
243 #define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */
244 #define CONFIG_SYS_PCI1_MMIO_BASE 0x90000000
245 #define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE
246 #define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */
247 #define CONFIG_SYS_PCI1_IO_BASE 0x00000000
248 #define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000
249 #define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */
251 #define CONFIG_SYS_PCI2_MEM_BASE 0xA0000000
252 #define CONFIG_SYS_PCI2_MEM_PHYS CONFIG_SYS_PCI2_MEM_BASE
253 #define CONFIG_SYS_PCI2_MEM_SIZE 0x10000000 /* 256M */
254 #define CONFIG_SYS_PCI2_MMIO_BASE 0xB0000000
255 #define CONFIG_SYS_PCI2_MMIO_PHYS CONFIG_SYS_PCI2_MMIO_BASE
256 #define CONFIG_SYS_PCI2_MMIO_SIZE 0x10000000 /* 256M */
257 #define CONFIG_SYS_PCI2_IO_BASE 0x00000000
258 #define CONFIG_SYS_PCI2_IO_PHYS 0xE2100000
259 #define CONFIG_SYS_PCI2_IO_SIZE 0x00100000 /* 1M */
261 #if defined(CONFIG_PCI)
265 #if defined(PCI_64BIT)
273 #define CONFIG_PCI_PNP /* do pci plug-and-play */
275 #undef CONFIG_EEPRO100
278 #if !defined(CONFIG_PCI_PNP)
279 #define PCI_ENET0_IOADDR 0xFIXME
280 #define PCI_ENET0_MEMADDR 0xFIXME
281 #define PCI_IDSEL_NUMBER 0xFIXME
284 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
285 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */
287 #endif /* CONFIG_PCI */
295 #define CONFIG_TSEC_ENET /* TSEC ethernet support */
298 #if defined(CONFIG_TSEC_ENET)
300 #define CONFIG_GMII /* MII PHY management */
302 #define CONFIG_TSEC1_NAME "TSEC0"
304 #define CONFIG_TSEC2_NAME "TSEC1"
305 #define CONFIG_PHY_M88E1111
306 #define TSEC1_PHY_ADDR 0x08
307 #define TSEC2_PHY_ADDR 0x10
308 #define TSEC1_PHYIDX 0
309 #define TSEC2_PHYIDX 0
310 #define TSEC1_FLAGS TSEC_GIGABIT
311 #define TSEC2_FLAGS TSEC_GIGABIT
313 /* Options are: TSEC[0-1] */
314 #define CONFIG_ETHPRIME "TSEC0"
316 #endif /* CONFIG_TSEC_ENET */
321 #ifndef CONFIG_SYS_RAMBOOT
322 #define CONFIG_ENV_IS_IN_FLASH
323 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0xc0000)
324 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
325 #define CONFIG_ENV_SIZE 0x2000
327 /* Address and size of Redundant Environment Sector */
328 #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
329 #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
332 #define CONFIG_SYS_NO_FLASH /* Flash is not usable now */
333 #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */
334 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
335 #define CONFIG_ENV_SIZE 0x2000
338 #define CONFIG_LOADS_ECHO /* echo on for serial download */
339 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
344 #define CONFIG_BOOTP_BOOTFILESIZE
345 #define CONFIG_BOOTP_BOOTPATH
346 #define CONFIG_BOOTP_GATEWAY
347 #define CONFIG_BOOTP_HOSTNAME
350 * Command line configuration.
352 #include <config_cmd_default.h>
354 #define CONFIG_CMD_I2C
355 #define CONFIG_CMD_MII
356 #define CONFIG_CMD_PING
357 #define CONFIG_CMD_DATE
358 #define CONFIG_SYS_RTC_BUS_NUM 0x01
359 #define CONFIG_SYS_I2C_RTC_ADDR 0x32
360 #define CONFIG_RTC_RX8025
361 #define CONFIG_CMD_TSI148
363 #if defined(CONFIG_PCI)
364 #define CONFIG_CMD_PCI
367 #if defined(CONFIG_SYS_RAMBOOT)
368 #undef CONFIG_CMD_ENV
369 #undef CONFIG_CMD_LOADS
372 #define CONFIG_CMD_ELF
373 /* Pass Ethernet MAC to VxWorks */
374 #define CONFIG_SYS_VXWORKS_MAC_PTR 0x000043f0
376 #undef CONFIG_WATCHDOG /* watchdog disabled */
379 * Miscellaneous configurable options
381 #define CONFIG_SYS_LONGHELP /* undef to save memory */
382 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
383 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
385 #if defined(CONFIG_CMD_KGDB)
386 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
388 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
391 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
392 #define CONFIG_SYS_MAXARGS 16 /* max num of command args */
393 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buf Size */
394 #define CONFIG_SYS_HZ 1000 /* decr freq: 1ms ticks */
397 * For booting Linux, the board info and command line data
398 * have to be in the first 256 MB of memory, since this is
399 * the maximum mapped by the Linux kernel during initialization.
401 #define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Init Memory map for Linux*/
403 #define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST */
405 #define CONFIG_SYS_HRCW_LOW (\
406 HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
407 HRCWL_DDR_TO_SCB_CLK_1X1 |\
408 HRCWL_CSB_TO_CLKIN |\
410 HRCWL_CORE_TO_CSB_2X1)
412 #if defined(PCI_64BIT)
413 #define CONFIG_SYS_HRCW_HIGH (\
416 HRCWH_PCI1_ARBITER_ENABLE |\
417 HRCWH_PCI2_ARBITER_DISABLE |\
419 HRCWH_FROM_0X00000100 |\
420 HRCWH_BOOTSEQ_DISABLE |\
421 HRCWH_SW_WATCHDOG_DISABLE |\
422 HRCWH_ROM_LOC_LOCAL_16BIT |\
423 HRCWH_TSEC1M_IN_GMII |\
424 HRCWH_TSEC2M_IN_GMII)
426 #define CONFIG_SYS_HRCW_HIGH (\
429 HRCWH_PCI1_ARBITER_ENABLE |\
430 HRCWH_PCI2_ARBITER_ENABLE |\
432 HRCWH_FROM_0X00000100 |\
433 HRCWH_BOOTSEQ_DISABLE |\
434 HRCWH_SW_WATCHDOG_DISABLE |\
435 HRCWH_ROM_LOC_LOCAL_16BIT |\
436 HRCWH_TSEC1M_IN_GMII |\
437 HRCWH_TSEC2M_IN_GMII)
440 /* System IO Config */
441 #define CONFIG_SYS_SICRH 0
442 #define CONFIG_SYS_SICRL SICRL_LDP_A
444 #define CONFIG_SYS_HID0_INIT 0x000000000
445 #define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \
446 HID0_ENABLE_INSTRUCTION_CACHE)
448 #define CONFIG_SYS_HID2 HID2_HBE
450 #define CONFIG_SYS_GPIO1_PRELIM
451 #define CONFIG_SYS_GPIO1_DIR 0x00100000
452 #define CONFIG_SYS_GPIO1_DAT 0x00100000
454 #define CONFIG_SYS_GPIO2_PRELIM
455 #define CONFIG_SYS_GPIO2_DIR 0x78900000
456 #define CONFIG_SYS_GPIO2_DAT 0x70100000
458 #define CONFIG_HIGH_BATS /* High BATs supported */
460 /* DDR @ 0x00000000 */
461 #define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | \
463 #define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | \
466 /* PCI @ 0x80000000 */
468 #define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_RW | \
470 #define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_256M | \
472 #define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE | BATL_PP_RW | \
473 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
474 #define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MMIO_BASE | BATU_BL_256M | \
477 #define CONFIG_SYS_IBAT1L (0)
478 #define CONFIG_SYS_IBAT1U (0)
479 #define CONFIG_SYS_IBAT2L (0)
480 #define CONFIG_SYS_IBAT2U (0)
483 #ifdef CONFIG_MPC83XX_PCI2
484 #define CONFIG_SYS_IBAT3L (CONFIG_SYS_PCI2_MEM_BASE | BATL_PP_RW | \
486 #define CONFIG_SYS_IBAT3U (CONFIG_SYS_PCI2_MEM_BASE | BATU_BL_256M | \
488 #define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCI2_MMIO_BASE | BATL_PP_RW | \
489 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
490 #define CONFIG_SYS_IBAT4U (CONFIG_SYS_PCI2_MMIO_BASE | BATU_BL_256M | \
493 #define CONFIG_SYS_IBAT3L (0)
494 #define CONFIG_SYS_IBAT3U (0)
495 #define CONFIG_SYS_IBAT4L (0)
496 #define CONFIG_SYS_IBAT4U (0)
499 /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 */
500 #define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR | BATL_PP_RW | \
501 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
502 #define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR | BATU_BL_256M | \
505 #define CONFIG_SYS_IBAT6L (0xF0000000 | BATL_PP_RW | BATL_MEMCOHERENCE)
506 #define CONFIG_SYS_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
508 #if (CONFIG_SYS_DDR_SIZE == 512)
509 #define CONFIG_SYS_IBAT7L (CONFIG_SYS_SDRAM_BASE+0x10000000 | \
510 BATL_PP_RW | BATL_MEMCOHERENCE)
511 #define CONFIG_SYS_IBAT7U (CONFIG_SYS_SDRAM_BASE+0x10000000 | \
512 BATU_BL_256M | BATU_VS | BATU_VP)
514 #define CONFIG_SYS_IBAT7L (0)
515 #define CONFIG_SYS_IBAT7U (0)
518 #define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
519 #define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
520 #define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
521 #define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
522 #define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
523 #define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
524 #define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
525 #define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
526 #define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L
527 #define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U
528 #define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L
529 #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
530 #define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L
531 #define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
532 #define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L
533 #define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U
535 #if defined(CONFIG_CMD_KGDB)
536 #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
537 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
541 * Environment Configuration
543 #define CONFIG_ENV_OVERWRITE
545 #if defined(CONFIG_TSEC_ENET)
546 #define CONFIG_HAS_ETH0
547 #define CONFIG_HAS_ETH1
550 #define CONFIG_HOSTNAME VME8349
551 #define CONFIG_ROOTPATH "/tftpboot/rootfs"
552 #define CONFIG_BOOTFILE "uImage"
554 #define CONFIG_LOADADDR 800000 /* def location for tftp and bootm */
556 #define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */
557 #undef CONFIG_BOOTARGS /* boot command will set bootargs */
559 #define CONFIG_BAUDRATE 9600
561 #define CONFIG_EXTRA_ENV_SETTINGS \
563 "hostname=vme8349\0" \
564 "nfsargs=setenv bootargs root=/dev/nfs rw " \
565 "nfsroot=${serverip}:${rootpath}\0" \
566 "ramargs=setenv bootargs root=/dev/ram rw\0" \
567 "addip=setenv bootargs ${bootargs} " \
568 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
569 ":${hostname}:${netdev}:off panic=1\0" \
570 "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
571 "flash_nfs=run nfsargs addip addtty;" \
572 "bootm ${kernel_addr}\0" \
573 "flash_self=run ramargs addip addtty;" \
574 "bootm ${kernel_addr} ${ramdisk_addr}\0" \
575 "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
577 "load=tftp 100000 /tftpboot/bdi2000/vme8349.bin\0" \
578 "update=protect off fff00000 fff3ffff; " \
579 "era fff00000 fff3ffff; cp.b 100000 fff00000 ${filesize}\0" \
580 "upd=run load update\0" \
582 "fdtfile=vme8349.dtb\0" \
585 #define CONFIG_NFSBOOTCOMMAND \
586 "setenv bootargs root=/dev/nfs rw " \
587 "nfsroot=$serverip:$rootpath " \
588 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:" \
590 "console=$consoledev,$baudrate $othbootargs;" \
591 "tftp $loadaddr $bootfile;" \
592 "tftp $fdtaddr $fdtfile;" \
593 "bootm $loadaddr - $fdtaddr"
595 #define CONFIG_RAMBOOTCOMMAND \
596 "setenv bootargs root=/dev/ram rw " \
597 "console=$consoledev,$baudrate $othbootargs;" \
598 "tftp $ramdiskaddr $ramdiskfile;" \
599 "tftp $loadaddr $bootfile;" \
600 "tftp $fdtaddr $fdtfile;" \
601 "bootm $loadaddr $ramdiskaddr $fdtaddr"
603 #define CONFIG_BOOTCOMMAND "run flash_self"
606 int vme8349_read_spd(unsigned char chip, unsigned int addr, int alen,
607 unsigned char *buffer, int len);
610 #endif /* __CONFIG_H */